cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

nvm-reg.h (19322B)


      1/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
      2/*
      3 * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
      4 * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
      5 * Copyright (C) 2016-2017 Intel Deutschland GmbH
      6 */
      7#ifndef __iwl_fw_api_nvm_reg_h__
      8#define __iwl_fw_api_nvm_reg_h__
      9
     10/**
     11 * enum iwl_regulatory_and_nvm_subcmd_ids - regulatory/NVM commands
     12 */
     13enum iwl_regulatory_and_nvm_subcmd_ids {
     14	/**
     15	 * @NVM_ACCESS_COMPLETE: &struct iwl_nvm_access_complete_cmd
     16	 */
     17	NVM_ACCESS_COMPLETE = 0x0,
     18
     19	/**
     20	 * @LARI_CONFIG_CHANGE: &struct iwl_lari_config_change_cmd
     21	 */
     22	LARI_CONFIG_CHANGE = 0x1,
     23
     24	/**
     25	 * @NVM_GET_INFO:
     26	 * Command is &struct iwl_nvm_get_info,
     27	 * response is &struct iwl_nvm_get_info_rsp
     28	 */
     29	NVM_GET_INFO = 0x2,
     30
     31	/**
     32	 * @TAS_CONFIG: &struct iwl_tas_config_cmd
     33	 */
     34	TAS_CONFIG = 0x3,
     35
     36	/**
     37	 * @SAR_OFFSET_MAPPING_TABLE_CMD: &iwl_sar_offset_mapping_cmd
     38	 */
     39	SAR_OFFSET_MAPPING_TABLE_CMD = 0x4,
     40
     41	/**
     42	 * @PNVM_INIT_COMPLETE_NTFY: &struct iwl_pnvm_init_complete_ntfy
     43	 */
     44	PNVM_INIT_COMPLETE_NTFY = 0xFE,
     45};
     46
     47/**
     48 * enum iwl_nvm_access_op - NVM access opcode
     49 * @IWL_NVM_READ: read NVM
     50 * @IWL_NVM_WRITE: write NVM
     51 */
     52enum iwl_nvm_access_op {
     53	IWL_NVM_READ	= 0,
     54	IWL_NVM_WRITE	= 1,
     55};
     56
     57/**
     58 * enum iwl_nvm_access_target - target of the NVM_ACCESS_CMD
     59 * @NVM_ACCESS_TARGET_CACHE: access the cache
     60 * @NVM_ACCESS_TARGET_OTP: access the OTP
     61 * @NVM_ACCESS_TARGET_EEPROM: access the EEPROM
     62 */
     63enum iwl_nvm_access_target {
     64	NVM_ACCESS_TARGET_CACHE = 0,
     65	NVM_ACCESS_TARGET_OTP = 1,
     66	NVM_ACCESS_TARGET_EEPROM = 2,
     67};
     68
     69/**
     70 * enum iwl_nvm_section_type - section types for NVM_ACCESS_CMD
     71 * @NVM_SECTION_TYPE_SW: software section
     72 * @NVM_SECTION_TYPE_REGULATORY: regulatory section
     73 * @NVM_SECTION_TYPE_CALIBRATION: calibration section
     74 * @NVM_SECTION_TYPE_PRODUCTION: production section
     75 * @NVM_SECTION_TYPE_REGULATORY_SDP: regulatory section used by 3168 series
     76 * @NVM_SECTION_TYPE_MAC_OVERRIDE: MAC override section
     77 * @NVM_SECTION_TYPE_PHY_SKU: PHY SKU section
     78 * @NVM_MAX_NUM_SECTIONS: number of sections
     79 */
     80enum iwl_nvm_section_type {
     81	NVM_SECTION_TYPE_SW = 1,
     82	NVM_SECTION_TYPE_REGULATORY = 3,
     83	NVM_SECTION_TYPE_CALIBRATION = 4,
     84	NVM_SECTION_TYPE_PRODUCTION = 5,
     85	NVM_SECTION_TYPE_REGULATORY_SDP = 8,
     86	NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
     87	NVM_SECTION_TYPE_PHY_SKU = 12,
     88	NVM_MAX_NUM_SECTIONS = 13,
     89};
     90
     91/**
     92 * struct iwl_nvm_access_cmd - Request the device to send an NVM section
     93 * @op_code: &enum iwl_nvm_access_op
     94 * @target: &enum iwl_nvm_access_target
     95 * @type: &enum iwl_nvm_section_type
     96 * @offset: offset in bytes into the section
     97 * @length: in bytes, to read/write
     98 * @data: if write operation, the data to write. On read its empty
     99 */
    100struct iwl_nvm_access_cmd {
    101	u8 op_code;
    102	u8 target;
    103	__le16 type;
    104	__le16 offset;
    105	__le16 length;
    106	u8 data[];
    107} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */
    108
    109/**
    110 * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
    111 * @offset: offset in bytes into the section
    112 * @length: in bytes, either how much was written or read
    113 * @type: NVM_SECTION_TYPE_*
    114 * @status: 0 for success, fail otherwise
    115 * @data: if read operation, the data returned. Empty on write.
    116 */
    117struct iwl_nvm_access_resp {
    118	__le16 offset;
    119	__le16 length;
    120	__le16 type;
    121	__le16 status;
    122	u8 data[];
    123} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */
    124
    125/*
    126 * struct iwl_nvm_get_info - request to get NVM data
    127 */
    128struct iwl_nvm_get_info {
    129	__le32 reserved;
    130} __packed; /* REGULATORY_NVM_GET_INFO_CMD_API_S_VER_1 */
    131
    132/**
    133 * enum iwl_nvm_info_general_flags - flags in NVM_GET_INFO resp
    134 * @NVM_GENERAL_FLAGS_EMPTY_OTP: 1 if OTP is empty
    135 */
    136enum iwl_nvm_info_general_flags {
    137	NVM_GENERAL_FLAGS_EMPTY_OTP	= BIT(0),
    138};
    139
    140/**
    141 * struct iwl_nvm_get_info_general - general NVM data
    142 * @flags: bit 0: 1 - empty, 0 - non-empty
    143 * @nvm_version: nvm version
    144 * @board_type: board type
    145 * @n_hw_addrs: number of reserved MAC addresses
    146 */
    147struct iwl_nvm_get_info_general {
    148	__le32 flags;
    149	__le16 nvm_version;
    150	u8 board_type;
    151	u8 n_hw_addrs;
    152} __packed; /* REGULATORY_NVM_GET_INFO_GENERAL_S_VER_2 */
    153
    154/**
    155 * enum iwl_nvm_mac_sku_flags - flags in &iwl_nvm_get_info_sku
    156 * @NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED: true if 2.4 band enabled
    157 * @NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED: true if 5.2 band enabled
    158 * @NVM_MAC_SKU_FLAGS_802_11N_ENABLED: true if 11n enabled
    159 * @NVM_MAC_SKU_FLAGS_802_11AC_ENABLED: true if 11ac enabled
    160 * @NVM_MAC_SKU_FLAGS_MIMO_DISABLED: true if MIMO disabled
    161 * @NVM_MAC_SKU_FLAGS_WAPI_ENABLED: true if WAPI enabled
    162 * @NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED: true if regulatory checker enabled
    163 * @NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED: true if API lock enabled
    164 */
    165enum iwl_nvm_mac_sku_flags {
    166	NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED	= BIT(0),
    167	NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED	= BIT(1),
    168	NVM_MAC_SKU_FLAGS_802_11N_ENABLED	= BIT(2),
    169	NVM_MAC_SKU_FLAGS_802_11AC_ENABLED	= BIT(3),
    170	/**
    171	 * @NVM_MAC_SKU_FLAGS_802_11AX_ENABLED: true if 11ax enabled
    172	 */
    173	NVM_MAC_SKU_FLAGS_802_11AX_ENABLED	= BIT(4),
    174	NVM_MAC_SKU_FLAGS_MIMO_DISABLED		= BIT(5),
    175	NVM_MAC_SKU_FLAGS_WAPI_ENABLED		= BIT(8),
    176	NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED	= BIT(14),
    177	NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED	= BIT(15),
    178};
    179
    180/**
    181 * struct iwl_nvm_get_info_sku - mac information
    182 * @mac_sku_flags: flags for SKU, see &enum iwl_nvm_mac_sku_flags
    183 */
    184struct iwl_nvm_get_info_sku {
    185	__le32 mac_sku_flags;
    186} __packed; /* REGULATORY_NVM_GET_INFO_MAC_SKU_SECTION_S_VER_2 */
    187
    188/**
    189 * struct iwl_nvm_get_info_phy - phy information
    190 * @tx_chains: BIT 0 chain A, BIT 1 chain B
    191 * @rx_chains: BIT 0 chain A, BIT 1 chain B
    192 */
    193struct iwl_nvm_get_info_phy {
    194	__le32 tx_chains;
    195	__le32 rx_chains;
    196} __packed; /* REGULATORY_NVM_GET_INFO_PHY_SKU_SECTION_S_VER_1 */
    197
    198#define IWL_NUM_CHANNELS_V1	51
    199#define IWL_NUM_CHANNELS	110
    200
    201/**
    202 * struct iwl_nvm_get_info_regulatory - regulatory information
    203 * @lar_enabled: is LAR enabled
    204 * @channel_profile: regulatory data of this channel
    205 * @reserved: reserved
    206 */
    207struct iwl_nvm_get_info_regulatory_v1 {
    208	__le32 lar_enabled;
    209	__le16 channel_profile[IWL_NUM_CHANNELS_V1];
    210	__le16 reserved;
    211} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_1 */
    212
    213/**
    214 * struct iwl_nvm_get_info_regulatory - regulatory information
    215 * @lar_enabled: is LAR enabled
    216 * @n_channels: number of valid channels in the array
    217 * @channel_profile: regulatory data of this channel
    218 */
    219struct iwl_nvm_get_info_regulatory {
    220	__le32 lar_enabled;
    221	__le32 n_channels;
    222	__le32 channel_profile[IWL_NUM_CHANNELS];
    223} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_2 */
    224
    225/**
    226 * struct iwl_nvm_get_info_rsp_v3 - response to get NVM data
    227 * @general: general NVM data
    228 * @mac_sku: data relating to MAC sku
    229 * @phy_sku: data relating to PHY sku
    230 * @regulatory: regulatory data
    231 */
    232struct iwl_nvm_get_info_rsp_v3 {
    233	struct iwl_nvm_get_info_general general;
    234	struct iwl_nvm_get_info_sku mac_sku;
    235	struct iwl_nvm_get_info_phy phy_sku;
    236	struct iwl_nvm_get_info_regulatory_v1 regulatory;
    237} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_3 */
    238
    239/**
    240 * struct iwl_nvm_get_info_rsp - response to get NVM data
    241 * @general: general NVM data
    242 * @mac_sku: data relating to MAC sku
    243 * @phy_sku: data relating to PHY sku
    244 * @regulatory: regulatory data
    245 */
    246struct iwl_nvm_get_info_rsp {
    247	struct iwl_nvm_get_info_general general;
    248	struct iwl_nvm_get_info_sku mac_sku;
    249	struct iwl_nvm_get_info_phy phy_sku;
    250	struct iwl_nvm_get_info_regulatory regulatory;
    251} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4 */
    252
    253/**
    254 * struct iwl_nvm_access_complete_cmd - NVM_ACCESS commands are completed
    255 * @reserved: reserved
    256 */
    257struct iwl_nvm_access_complete_cmd {
    258	__le32 reserved;
    259} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */
    260
    261/**
    262 * struct iwl_mcc_update_cmd - Request the device to update geographic
    263 * regulatory profile according to the given MCC (Mobile Country Code).
    264 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
    265 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
    266 * MCC in the cmd response will be the relevant MCC in the NVM.
    267 * @mcc: given mobile country code
    268 * @source_id: the source from where we got the MCC, see iwl_mcc_source
    269 * @reserved: reserved for alignment
    270 * @key: integrity key for MCC API OEM testing
    271 * @reserved2: reserved
    272 */
    273struct iwl_mcc_update_cmd {
    274	__le16 mcc;
    275	u8 source_id;
    276	u8 reserved;
    277	__le32 key;
    278	u8 reserved2[20];
    279} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
    280
    281/**
    282 * enum iwl_geo_information - geographic information.
    283 * @GEO_NO_INFO: no special info for this geo profile.
    284 * @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params
    285 *	for the 5 GHz band.
    286 */
    287enum iwl_geo_information {
    288	GEO_NO_INFO =			0,
    289	GEO_WMM_ETSI_5GHZ_INFO =	BIT(0),
    290};
    291
    292/**
    293 * struct iwl_mcc_update_resp_v3 - response to MCC_UPDATE_CMD.
    294 * Contains the new channel control profile map, if changed, and the new MCC
    295 * (mobile country code).
    296 * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
    297 * @status: see &enum iwl_mcc_update_status
    298 * @mcc: the new applied MCC
    299 * @cap: capabilities for all channels which matches the MCC
    300 * @source_id: the MCC source, see iwl_mcc_source
    301 * @time: time elapsed from the MCC test start (in units of 30 seconds)
    302 * @geo_info: geographic specific profile information
    303 *	see &enum iwl_geo_information.
    304 * @n_channels: number of channels in @channels_data.
    305 * @channels: channel control data map, DWORD for each channel. Only the first
    306 *	16bits are used.
    307 */
    308struct iwl_mcc_update_resp_v3 {
    309	__le32 status;
    310	__le16 mcc;
    311	u8 cap;
    312	u8 source_id;
    313	__le16 time;
    314	__le16 geo_info;
    315	__le32 n_channels;
    316	__le32 channels[];
    317} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */
    318
    319/**
    320 * struct iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
    321 * Contains the new channel control profile map, if changed, and the new MCC
    322 * (mobile country code).
    323 * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
    324 * @status: see &enum iwl_mcc_update_status
    325 * @mcc: the new applied MCC
    326 * @cap: capabilities for all channels which matches the MCC
    327 * @time: time elapsed from the MCC test start (in units of 30 seconds)
    328 * @geo_info: geographic specific profile information
    329 *	see &enum iwl_geo_information.
    330 * @source_id: the MCC source, see iwl_mcc_source
    331 * @reserved: for four bytes alignment.
    332 * @n_channels: number of channels in @channels_data.
    333 * @channels: channel control data map, DWORD for each channel. Only the first
    334 *	16bits are used.
    335 */
    336struct iwl_mcc_update_resp {
    337	__le32 status;
    338	__le16 mcc;
    339	__le16 cap;
    340	__le16 time;
    341	__le16 geo_info;
    342	u8 source_id;
    343	u8 reserved[3];
    344	__le32 n_channels;
    345	__le32 channels[];
    346} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */
    347
    348/**
    349 * struct iwl_mcc_chub_notif - chub notifies of mcc change
    350 * (MCC_CHUB_UPDATE_CMD = 0xc9)
    351 * The Chub (Communication Hub, CommsHUB) is a HW component that connects to
    352 * the cellular and connectivity cores that gets updates of the mcc, and
    353 * notifies the ucode directly of any mcc change.
    354 * The ucode requests the driver to request the device to update geographic
    355 * regulatory  profile according to the given MCC (Mobile Country Code).
    356 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
    357 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
    358 * MCC in the cmd response will be the relevant MCC in the NVM.
    359 * @mcc: given mobile country code
    360 * @source_id: identity of the change originator, see iwl_mcc_source
    361 * @reserved1: reserved for alignment
    362 */
    363struct iwl_mcc_chub_notif {
    364	__le16 mcc;
    365	u8 source_id;
    366	u8 reserved1;
    367} __packed; /* LAR_MCC_NOTIFY_S */
    368
    369enum iwl_mcc_update_status {
    370	MCC_RESP_NEW_CHAN_PROFILE,
    371	MCC_RESP_SAME_CHAN_PROFILE,
    372	MCC_RESP_INVALID,
    373	MCC_RESP_NVM_DISABLED,
    374	MCC_RESP_ILLEGAL,
    375	MCC_RESP_LOW_PRIORITY,
    376	MCC_RESP_TEST_MODE_ACTIVE,
    377	MCC_RESP_TEST_MODE_NOT_ACTIVE,
    378	MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
    379};
    380
    381enum iwl_mcc_source {
    382	MCC_SOURCE_OLD_FW = 0,
    383	MCC_SOURCE_ME = 1,
    384	MCC_SOURCE_BIOS = 2,
    385	MCC_SOURCE_3G_LTE_HOST = 3,
    386	MCC_SOURCE_3G_LTE_DEVICE = 4,
    387	MCC_SOURCE_WIFI = 5,
    388	MCC_SOURCE_RESERVED = 6,
    389	MCC_SOURCE_DEFAULT = 7,
    390	MCC_SOURCE_UNINITIALIZED = 8,
    391	MCC_SOURCE_MCC_API = 9,
    392	MCC_SOURCE_GET_CURRENT = 0x10,
    393	MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
    394};
    395
    396#define IWL_TAS_BLOCK_LIST_MAX 16
    397/**
    398 * struct iwl_tas_config_cmd_v2 - configures the TAS
    399 * @block_list_size: size of relevant field in block_list_array
    400 * @block_list_array: list of countries where TAS must be disabled
    401 */
    402struct iwl_tas_config_cmd_v2 {
    403	__le32 block_list_size;
    404	__le32 block_list_array[IWL_TAS_BLOCK_LIST_MAX];
    405} __packed; /* TAS_CONFIG_CMD_API_S_VER_2 */
    406
    407/**
    408 * struct iwl_tas_config_cmd_v3 - configures the TAS
    409 * @block_list_size: size of relevant field in block_list_array
    410 * @block_list_array: list of countries where TAS must be disabled
    411 * @override_tas_iec: indicates whether to override default value of IEC regulatory
    412 * @enable_tas_iec: in case override_tas_iec is set -
    413 *	indicates whether IEC regulatory is enabled or disabled
    414 */
    415struct iwl_tas_config_cmd_v3 {
    416	__le32 block_list_size;
    417	__le32 block_list_array[IWL_TAS_BLOCK_LIST_MAX];
    418	__le16 override_tas_iec;
    419	__le16 enable_tas_iec;
    420} __packed; /* TAS_CONFIG_CMD_API_S_VER_3 */
    421
    422/**
    423 * struct iwl_tas_config_cmd_v3 - configures the TAS
    424 * @block_list_size: size of relevant field in block_list_array
    425 * @block_list_array: list of countries where TAS must be disabled
    426 * @override_tas_iec: indicates whether to override default value of IEC regulatory
    427 * @enable_tas_iec: in case override_tas_iec is set -
    428 *	indicates whether IEC regulatory is enabled or disabled
    429 * @usa_tas_uhb_allowed: if set, allow TAS UHB in the USA
    430 * @reserved: reserved
    431*/
    432struct iwl_tas_config_cmd_v4 {
    433	__le32 block_list_size;
    434	__le32 block_list_array[IWL_TAS_BLOCK_LIST_MAX];
    435	u8 override_tas_iec;
    436	u8 enable_tas_iec;
    437	u8 usa_tas_uhb_allowed;
    438	u8 reserved;
    439} __packed; /* TAS_CONFIG_CMD_API_S_VER_4 */
    440
    441union iwl_tas_config_cmd {
    442	struct iwl_tas_config_cmd_v2 v2;
    443	struct iwl_tas_config_cmd_v3 v3;
    444	struct iwl_tas_config_cmd_v4 v4;
    445};
    446/**
    447 * enum iwl_lari_configs - bit masks for the various LARI config operations
    448 * @LARI_CONFIG_DISABLE_11AC_UKRAINE_MSK: disable 11ac in ukraine
    449 * @LARI_CONFIG_CHANGE_ETSI_TO_PASSIVE_MSK: ETSI 5.8GHz SRD passive scan
    450 * @LARI_CONFIG_CHANGE_ETSI_TO_DISABLED_MSK: ETSI 5.8GHz SRD disabled
    451 * @LARI_CONFIG_ENABLE_5G2_IN_INDONESIA_MSK: enable 5.15/5.35GHz bands in
    452 * 	Indonesia
    453 */
    454enum iwl_lari_config_masks {
    455	LARI_CONFIG_DISABLE_11AC_UKRAINE_MSK		= BIT(0),
    456	LARI_CONFIG_CHANGE_ETSI_TO_PASSIVE_MSK		= BIT(1),
    457	LARI_CONFIG_CHANGE_ETSI_TO_DISABLED_MSK		= BIT(2),
    458	LARI_CONFIG_ENABLE_5G2_IN_INDONESIA_MSK		= BIT(3),
    459};
    460
    461#define IWL_11AX_UKRAINE_MASK 3
    462#define IWL_11AX_UKRAINE_SHIFT 8
    463
    464/**
    465 * struct iwl_lari_config_change_cmd_v1 - change LARI configuration
    466 * @config_bitmap: bit map of the config commands. each bit will trigger a
    467 * different predefined FW config operation
    468 */
    469struct iwl_lari_config_change_cmd_v1 {
    470	__le32 config_bitmap;
    471} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_1 */
    472
    473/**
    474 * struct iwl_lari_config_change_cmd_v2 - change LARI configuration
    475 * @config_bitmap: bit map of the config commands. each bit will trigger a
    476 * different predefined FW config operation
    477 * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets
    478 */
    479struct iwl_lari_config_change_cmd_v2 {
    480	__le32 config_bitmap;
    481	__le32 oem_uhb_allow_bitmap;
    482} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_2 */
    483
    484/**
    485 * struct iwl_lari_config_change_cmd_v3 - change LARI configuration
    486 * @config_bitmap: bit map of the config commands. each bit will trigger a
    487 * different predefined FW config operation
    488 * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets
    489 * @oem_11ax_allow_bitmap: bitmap of 11ax allowed MCCs.
    490 * For each supported country, a pair of regulatory override bit and 11ax mode exist
    491 * in the bit field.
    492 */
    493struct iwl_lari_config_change_cmd_v3 {
    494	__le32 config_bitmap;
    495	__le32 oem_uhb_allow_bitmap;
    496	__le32 oem_11ax_allow_bitmap;
    497} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_3 */
    498
    499/**
    500 * struct iwl_lari_config_change_cmd_v4 - change LARI configuration
    501 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a
    502 *     different predefined FW config operation.
    503 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets.
    504 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits
    505 *     per country, one to indicate whether to override and the other to
    506 *     indicate the value to use.
    507 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits
    508 *     per country, one to indicate whether to override and the other to
    509 *     indicate allow/disallow unii4 channels.
    510 */
    511struct iwl_lari_config_change_cmd_v4 {
    512	__le32 config_bitmap;
    513	__le32 oem_uhb_allow_bitmap;
    514	__le32 oem_11ax_allow_bitmap;
    515	__le32 oem_unii4_allow_bitmap;
    516} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_4 */
    517
    518/**
    519 * struct iwl_lari_config_change_cmd_v5 - change LARI configuration
    520 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a
    521 *     different predefined FW config operation.
    522 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets.
    523 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits
    524 *     per country, one to indicate whether to override and the other to
    525 *     indicate the value to use.
    526 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits
    527 *     per country, one to indicate whether to override and the other to
    528 *     indicate allow/disallow unii4 channels.
    529 * @chan_state_active_bitmap: Bitmap for overriding channel state to active.
    530 *     Each bit represents a country or region to activate, according to the BIOS
    531 *     definitions.
    532 */
    533struct iwl_lari_config_change_cmd_v5 {
    534	__le32 config_bitmap;
    535	__le32 oem_uhb_allow_bitmap;
    536	__le32 oem_11ax_allow_bitmap;
    537	__le32 oem_unii4_allow_bitmap;
    538	__le32 chan_state_active_bitmap;
    539} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_5 */
    540
    541/**
    542 * struct iwl_lari_config_change_cmd_v6 - change LARI configuration
    543 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a
    544 *     different predefined FW config operation.
    545 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets.
    546 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits
    547 *     per country, one to indicate whether to override and the other to
    548 *     indicate the value to use.
    549 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits
    550 *     per country, one to indicate whether to override and the other to
    551 *     indicate allow/disallow unii4 channels.
    552 * @chan_state_active_bitmap: Bitmap for overriding channel state to active.
    553 *     Each bit represents a country or region to activate, according to the BIOS
    554 *     definitions.
    555 * @force_disable_channels_bitmap: Bitmap of disabled bands/channels.
    556 *     Each bit represents a set of channels in a specific band that should be disabled
    557 */
    558struct iwl_lari_config_change_cmd_v6 {
    559	__le32 config_bitmap;
    560	__le32 oem_uhb_allow_bitmap;
    561	__le32 oem_11ax_allow_bitmap;
    562	__le32 oem_unii4_allow_bitmap;
    563	__le32 chan_state_active_bitmap;
    564	__le32 force_disable_channels_bitmap;
    565} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_6 */
    566
    567/**
    568 * struct iwl_pnvm_init_complete_ntfy - PNVM initialization complete
    569 * @status: PNVM image loading status
    570 */
    571struct iwl_pnvm_init_complete_ntfy {
    572	__le32 status;
    573} __packed; /* PNVM_INIT_COMPLETE_NTFY_S_VER_1 */
    574
    575#endif /* __iwl_fw_api_nvm_reg_h__ */