Kconfig (3165B)
1# SPDX-License-Identifier: GPL-2.0-only 2config HOSTAP 3 tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" 4 select WIRELESS_EXT 5 select WEXT_SPY 6 select WEXT_PRIV 7 select CRYPTO 8 select CRYPTO_MICHAEL_MIC 9 select CRC32 10 select LIB80211 11 select LIB80211_CRYPT_WEP 12 select LIB80211_CRYPT_TKIP 13 select LIB80211_CRYPT_CCMP 14 help 15 Shared driver code for IEEE 802.11b wireless cards based on 16 Intersil Prism2/2.5/3 chipset. This driver supports so called 17 Host AP mode that allows the card to act as an IEEE 802.11 18 access point. 19 20 See <http://hostap.epitest.fi/> for more information about the 21 Host AP driver configuration and tools. This site includes 22 information and tools (hostapd and wpa_supplicant) for WPA/WPA2 23 support. 24 25 This option includes the base Host AP driver code that is shared by 26 different hardware models. You will also need to enable support for 27 PLX/PCI/CS version of the driver to actually use the driver. 28 29 The driver can be compiled as a module and it will be called 30 hostap. 31 32config HOSTAP_FIRMWARE 33 bool "Support downloading firmware images with Host AP driver" 34 depends on HOSTAP 35 help 36 Configure Host AP driver to include support for firmware image 37 download. This option by itself only enables downloading to the 38 volatile memory, i.e. the card RAM. This option is required to 39 support cards that don't have firmware in flash, such as D-Link 40 DWL-520 rev E and D-Link DWL-650 rev P. 41 42 Firmware image downloading needs a user space tool, prism2_srec. 43 It is available from http://hostap.epitest.fi/. 44 45config HOSTAP_FIRMWARE_NVRAM 46 bool "Support for non-volatile firmware download" 47 depends on HOSTAP_FIRMWARE 48 help 49 Allow Host AP driver to write firmware images to the non-volatile 50 card memory, i.e. flash memory that survives power cycling. 51 Enable this option if you want to be able to change card firmware 52 permanently. 53 54 Firmware image downloading needs a user space tool, prism2_srec. 55 It is available from http://hostap.epitest.fi/. 56 57config HOSTAP_PLX 58 tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" 59 depends on PCI && HOSTAP 60 help 61 Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based 62 PCI adaptors. 63 64 "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this 65 driver and its help text includes more information about the Host AP 66 driver. 67 68 The driver can be compiled as a module and will be named 69 hostap_plx. 70 71config HOSTAP_PCI 72 tristate "Host AP driver for Prism2.5 PCI adaptors" 73 depends on PCI && HOSTAP 74 help 75 Host AP driver's version for Prism2.5 PCI adaptors. 76 77 "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this 78 driver and its help text includes more information about the Host AP 79 driver. 80 81 The driver can be compiled as a module and will be named 82 hostap_pci. 83 84config HOSTAP_CS 85 tristate "Host AP driver for Prism2/2.5/3 PC Cards" 86 depends on PCMCIA && HOSTAP 87 help 88 Host AP driver's version for Prism2/2.5/3 PC Cards. 89 90 "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this 91 driver and its help text includes more information about the Host AP 92 driver. 93 94 The driver can be compiled as a module and will be named 95 hostap_cs.