p54usb.c (29754B)
1// SPDX-License-Identifier: GPL-2.0-only 2 3/* 4 * Linux device driver for USB based Prism54 5 * 6 * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> 7 * 8 * Based on the islsm (softmac prism54) driver, which is: 9 * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. 10 */ 11 12#include <linux/usb.h> 13#include <linux/pci.h> 14#include <linux/slab.h> 15#include <linux/firmware.h> 16#include <linux/etherdevice.h> 17#include <linux/delay.h> 18#include <linux/crc32.h> 19#include <linux/module.h> 20#include <net/mac80211.h> 21 22#include "p54.h" 23#include "lmac.h" 24#include "p54usb.h" 25 26MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); 27MODULE_DESCRIPTION("Prism54 USB wireless driver"); 28MODULE_LICENSE("GPL"); 29MODULE_ALIAS("prism54usb"); 30MODULE_FIRMWARE("isl3886usb"); 31MODULE_FIRMWARE("isl3887usb"); 32 33static struct usb_driver p54u_driver; 34 35/* 36 * Note: 37 * 38 * Always update our wiki's device list (located at: 39 * http://wireless.wiki.kernel.org/en/users/Drivers/p54/devices ), 40 * whenever you add a new device. 41 */ 42 43static const struct usb_device_id p54u_table[] = { 44 /* Version 1 devices (pci chip + net2280) */ 45 {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ 46 {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ 47 {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ 48 {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */ 49 {USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */ 50 {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ 51 {USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */ 52 {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */ 53 {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */ 54 {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */ 55 {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */ 56 {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ 57 {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ 58 {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ 59 {USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */ 60 {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ 61 {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */ 62 {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */ 63 {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ 64 {USB_DEVICE(0x124a, 0x4026)}, /* AirVasT USB wireless device */ 65 {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */ 66 {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */ 67 {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */ 68 {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */ 69 {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ 70 {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ 71 {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ 72 {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ 73 {USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */ 74 {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ 75 {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ 76 77 /* Version 2 devices (3887) */ 78 {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */ 79 {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ 80 {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ 81 {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ 82 {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */ 83 {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ 84 {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ 85 {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */ 86 {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ 87 {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ 88 {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ 89 {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */ 90 {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */ 91 {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ 92 {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ 93 {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */ 94 {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/ 95 {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ 96 /* {USB_DEVICE(0x0cde, 0x0006)}, * Medion MD40900 already listed above, 97 * just noting it here for clarity */ 98 {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ 99 {USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */ 100 {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ 101 {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ 102 {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */ 103 {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ 104 {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ 105 {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ 106 {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ 107 /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */ 108 {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */ 109 {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */ 110 {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ 111 {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */ 112 {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ 113 {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ 114 {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ 115 {} 116}; 117 118MODULE_DEVICE_TABLE(usb, p54u_table); 119 120static const struct { 121 u32 intf; 122 enum p54u_hw_type type; 123 const char *fw; 124 char hw[20]; 125} p54u_fwlist[__NUM_P54U_HWTYPES] = { 126 { 127 .type = P54U_NET2280, 128 .intf = FW_LM86, 129 .fw = "isl3886usb", 130 .hw = "ISL3886 + net2280", 131 }, 132 { 133 .type = P54U_3887, 134 .intf = FW_LM87, 135 .fw = "isl3887usb", 136 .hw = "ISL3887", 137 }, 138}; 139 140static void p54u_rx_cb(struct urb *urb) 141{ 142 struct sk_buff *skb = (struct sk_buff *) urb->context; 143 struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb; 144 struct ieee80211_hw *dev = info->dev; 145 struct p54u_priv *priv = dev->priv; 146 147 skb_unlink(skb, &priv->rx_queue); 148 149 if (unlikely(urb->status)) { 150 dev_kfree_skb_irq(skb); 151 return; 152 } 153 154 skb_put(skb, urb->actual_length); 155 156 if (priv->hw_type == P54U_NET2280) 157 skb_pull(skb, priv->common.tx_hdr_len); 158 if (priv->common.fw_interface == FW_LM87) { 159 skb_pull(skb, 4); 160 skb_put(skb, 4); 161 } 162 163 if (p54_rx(dev, skb)) { 164 skb = dev_alloc_skb(priv->common.rx_mtu + 32); 165 if (unlikely(!skb)) { 166 /* TODO check rx queue length and refill *somewhere* */ 167 return; 168 } 169 170 info = (struct p54u_rx_info *) skb->cb; 171 info->urb = urb; 172 info->dev = dev; 173 urb->transfer_buffer = skb_tail_pointer(skb); 174 urb->context = skb; 175 } else { 176 if (priv->hw_type == P54U_NET2280) 177 skb_push(skb, priv->common.tx_hdr_len); 178 if (priv->common.fw_interface == FW_LM87) { 179 skb_push(skb, 4); 180 skb_put(skb, 4); 181 } 182 skb_reset_tail_pointer(skb); 183 skb_trim(skb, 0); 184 urb->transfer_buffer = skb_tail_pointer(skb); 185 } 186 skb_queue_tail(&priv->rx_queue, skb); 187 usb_anchor_urb(urb, &priv->submitted); 188 if (usb_submit_urb(urb, GFP_ATOMIC)) { 189 skb_unlink(skb, &priv->rx_queue); 190 usb_unanchor_urb(urb); 191 dev_kfree_skb_irq(skb); 192 } 193} 194 195static void p54u_tx_cb(struct urb *urb) 196{ 197 struct sk_buff *skb = urb->context; 198 struct ieee80211_hw *dev = 199 usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); 200 201 p54_free_skb(dev, skb); 202} 203 204static void p54u_tx_dummy_cb(struct urb *urb) { } 205 206static void p54u_free_urbs(struct ieee80211_hw *dev) 207{ 208 struct p54u_priv *priv = dev->priv; 209 usb_kill_anchored_urbs(&priv->submitted); 210} 211 212static void p54u_stop(struct ieee80211_hw *dev) 213{ 214 /* 215 * TODO: figure out how to reliably stop the 3887 and net2280 so 216 * the hardware is still usable next time we want to start it. 217 * until then, we just stop listening to the hardware.. 218 */ 219 p54u_free_urbs(dev); 220} 221 222static int p54u_init_urbs(struct ieee80211_hw *dev) 223{ 224 struct p54u_priv *priv = dev->priv; 225 struct urb *entry = NULL; 226 struct sk_buff *skb; 227 struct p54u_rx_info *info; 228 int ret = 0; 229 230 while (skb_queue_len(&priv->rx_queue) < 32) { 231 skb = __dev_alloc_skb(priv->common.rx_mtu + 32, GFP_KERNEL); 232 if (!skb) { 233 ret = -ENOMEM; 234 goto err; 235 } 236 entry = usb_alloc_urb(0, GFP_KERNEL); 237 if (!entry) { 238 ret = -ENOMEM; 239 goto err; 240 } 241 242 usb_fill_bulk_urb(entry, priv->udev, 243 usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), 244 skb_tail_pointer(skb), 245 priv->common.rx_mtu + 32, p54u_rx_cb, skb); 246 info = (struct p54u_rx_info *) skb->cb; 247 info->urb = entry; 248 info->dev = dev; 249 skb_queue_tail(&priv->rx_queue, skb); 250 251 usb_anchor_urb(entry, &priv->submitted); 252 ret = usb_submit_urb(entry, GFP_KERNEL); 253 if (ret) { 254 skb_unlink(skb, &priv->rx_queue); 255 usb_unanchor_urb(entry); 256 goto err; 257 } 258 usb_free_urb(entry); 259 entry = NULL; 260 } 261 262 return 0; 263 264 err: 265 usb_free_urb(entry); 266 kfree_skb(skb); 267 p54u_free_urbs(dev); 268 return ret; 269} 270 271static int p54u_open(struct ieee80211_hw *dev) 272{ 273 /* 274 * TODO: Because we don't know how to reliably stop the 3887 and 275 * the isl3886+net2280, other than brutally cut off all 276 * communications. We have to reinitialize the urbs on every start. 277 */ 278 return p54u_init_urbs(dev); 279} 280 281static __le32 p54u_lm87_chksum(const __le32 *data, size_t length) 282{ 283 u32 chk = 0; 284 285 length >>= 2; 286 while (length--) { 287 chk ^= le32_to_cpu(*data++); 288 chk = (chk >> 5) ^ (chk << 3); 289 } 290 291 return cpu_to_le32(chk); 292} 293 294static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb) 295{ 296 struct p54u_priv *priv = dev->priv; 297 struct urb *data_urb; 298 struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); 299 300 data_urb = usb_alloc_urb(0, GFP_ATOMIC); 301 if (!data_urb) { 302 p54_free_skb(dev, skb); 303 return; 304 } 305 306 hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); 307 hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id; 308 309 usb_fill_bulk_urb(data_urb, priv->udev, 310 usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), 311 hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? 312 p54u_tx_cb : p54u_tx_dummy_cb, skb); 313 data_urb->transfer_flags |= URB_ZERO_PACKET; 314 315 usb_anchor_urb(data_urb, &priv->submitted); 316 if (usb_submit_urb(data_urb, GFP_ATOMIC)) { 317 usb_unanchor_urb(data_urb); 318 p54_free_skb(dev, skb); 319 } 320 usb_free_urb(data_urb); 321} 322 323static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) 324{ 325 struct p54u_priv *priv = dev->priv; 326 struct urb *int_urb = NULL, *data_urb = NULL; 327 struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); 328 struct net2280_reg_write *reg = NULL; 329 int err = -ENOMEM; 330 331 reg = kmalloc(sizeof(*reg), GFP_ATOMIC); 332 if (!reg) 333 goto out; 334 335 int_urb = usb_alloc_urb(0, GFP_ATOMIC); 336 if (!int_urb) 337 goto out; 338 339 data_urb = usb_alloc_urb(0, GFP_ATOMIC); 340 if (!data_urb) 341 goto out; 342 343 reg->port = cpu_to_le16(NET2280_DEV_U32); 344 reg->addr = cpu_to_le32(P54U_DEV_BASE); 345 reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); 346 347 memset(hdr, 0, sizeof(*hdr)); 348 hdr->len = cpu_to_le16(skb->len); 349 hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id; 350 351 usb_fill_bulk_urb(int_urb, priv->udev, 352 usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), 353 p54u_tx_dummy_cb, dev); 354 355 /* 356 * URB_FREE_BUFFER triggers a code path in the USB subsystem that will 357 * free what is inside the transfer_buffer after the last reference to 358 * the int_urb is dropped. 359 */ 360 int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET; 361 reg = NULL; 362 363 usb_fill_bulk_urb(data_urb, priv->udev, 364 usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), 365 hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? 366 p54u_tx_cb : p54u_tx_dummy_cb, skb); 367 data_urb->transfer_flags |= URB_ZERO_PACKET; 368 369 usb_anchor_urb(int_urb, &priv->submitted); 370 err = usb_submit_urb(int_urb, GFP_ATOMIC); 371 if (err) { 372 usb_unanchor_urb(int_urb); 373 goto out; 374 } 375 376 usb_anchor_urb(data_urb, &priv->submitted); 377 err = usb_submit_urb(data_urb, GFP_ATOMIC); 378 if (err) { 379 usb_unanchor_urb(data_urb); 380 goto out; 381 } 382out: 383 usb_free_urb(int_urb); 384 usb_free_urb(data_urb); 385 386 if (err) { 387 kfree(reg); 388 p54_free_skb(dev, skb); 389 } 390} 391 392static int p54u_write(struct p54u_priv *priv, 393 struct net2280_reg_write *buf, 394 enum net2280_op_type type, 395 __le32 addr, __le32 val) 396{ 397 unsigned int ep; 398 int alen; 399 400 if (type & 0x0800) 401 ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV); 402 else 403 ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG); 404 405 buf->port = cpu_to_le16(type); 406 buf->addr = addr; 407 buf->val = val; 408 409 return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000); 410} 411 412static int p54u_read(struct p54u_priv *priv, void *buf, 413 enum net2280_op_type type, 414 __le32 addr, __le32 *val) 415{ 416 struct net2280_reg_read *read = buf; 417 __le32 *reg = buf; 418 unsigned int ep; 419 int alen, err; 420 421 if (type & 0x0800) 422 ep = P54U_PIPE_DEV; 423 else 424 ep = P54U_PIPE_BRG; 425 426 read->port = cpu_to_le16(type); 427 read->addr = addr; 428 429 err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), 430 read, sizeof(*read), &alen, 1000); 431 if (err) 432 return err; 433 434 err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep), 435 reg, sizeof(*reg), &alen, 1000); 436 if (err) 437 return err; 438 439 *val = *reg; 440 return 0; 441} 442 443static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, 444 void *data, size_t len) 445{ 446 int alen; 447 return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), 448 data, len, &alen, 2000); 449} 450 451static int p54u_device_reset(struct ieee80211_hw *dev) 452{ 453 struct p54u_priv *priv = dev->priv; 454 int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING); 455 456 if (lock) { 457 ret = usb_lock_device_for_reset(priv->udev, priv->intf); 458 if (ret < 0) { 459 dev_err(&priv->udev->dev, "(p54usb) unable to lock " 460 "device for reset (%d)!\n", ret); 461 return ret; 462 } 463 } 464 465 ret = usb_reset_device(priv->udev); 466 if (lock) 467 usb_unlock_device(priv->udev); 468 469 if (ret) 470 dev_err(&priv->udev->dev, "(p54usb) unable to reset " 471 "device (%d)!\n", ret); 472 473 return ret; 474} 475 476static const char p54u_romboot_3887[] = "~~~~"; 477static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) 478{ 479 struct p54u_priv *priv = dev->priv; 480 u8 *buf; 481 int ret; 482 483 buf = kmemdup(p54u_romboot_3887, 4, GFP_KERNEL); 484 if (!buf) 485 return -ENOMEM; 486 ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, 487 buf, 4); 488 kfree(buf); 489 if (ret) 490 dev_err(&priv->udev->dev, "(p54usb) unable to jump to " 491 "boot ROM (%d)!\n", ret); 492 493 return ret; 494} 495 496static const char p54u_firmware_upload_3887[] = "<\r"; 497static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) 498{ 499 struct p54u_priv *priv = dev->priv; 500 int err, alen; 501 u8 carry = 0; 502 u8 *buf, *tmp; 503 const u8 *data; 504 unsigned int left, remains, block_size; 505 struct x2_header *hdr; 506 unsigned long timeout; 507 508 err = p54u_firmware_reset_3887(dev); 509 if (err) 510 return err; 511 512 tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); 513 if (!buf) 514 return -ENOMEM; 515 516 left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size); 517 strcpy(buf, p54u_firmware_upload_3887); 518 left -= strlen(p54u_firmware_upload_3887); 519 tmp += strlen(p54u_firmware_upload_3887); 520 521 data = priv->fw->data; 522 remains = priv->fw->size; 523 524 hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887)); 525 memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); 526 hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); 527 hdr->fw_length = cpu_to_le32(priv->fw->size); 528 hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, 529 sizeof(u32)*2)); 530 left -= sizeof(*hdr); 531 tmp += sizeof(*hdr); 532 533 while (remains) { 534 while (left--) { 535 if (carry) { 536 *tmp++ = carry; 537 carry = 0; 538 remains--; 539 continue; 540 } 541 switch (*data) { 542 case '~': 543 *tmp++ = '}'; 544 carry = '^'; 545 break; 546 case '}': 547 *tmp++ = '}'; 548 carry = ']'; 549 break; 550 default: 551 *tmp++ = *data; 552 remains--; 553 break; 554 } 555 data++; 556 } 557 558 err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); 559 if (err) { 560 dev_err(&priv->udev->dev, "(p54usb) firmware " 561 "upload failed!\n"); 562 goto err_upload_failed; 563 } 564 565 tmp = buf; 566 left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); 567 } 568 569 *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data, 570 priv->fw->size)); 571 err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); 572 if (err) { 573 dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); 574 goto err_upload_failed; 575 } 576 timeout = jiffies + msecs_to_jiffies(1000); 577 while (!(err = usb_bulk_msg(priv->udev, 578 usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { 579 if (alen > 2 && !memcmp(buf, "OK", 2)) 580 break; 581 582 if (alen > 5 && !memcmp(buf, "ERROR", 5)) { 583 err = -EINVAL; 584 break; 585 } 586 587 if (time_after(jiffies, timeout)) { 588 dev_err(&priv->udev->dev, "(p54usb) firmware boot " 589 "timed out!\n"); 590 err = -ETIMEDOUT; 591 break; 592 } 593 } 594 if (err) { 595 dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); 596 goto err_upload_failed; 597 } 598 599 buf[0] = 'g'; 600 buf[1] = '\r'; 601 err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); 602 if (err) { 603 dev_err(&priv->udev->dev, "(p54usb) firmware boot failed!\n"); 604 goto err_upload_failed; 605 } 606 607 timeout = jiffies + msecs_to_jiffies(1000); 608 while (!(err = usb_bulk_msg(priv->udev, 609 usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { 610 if (alen > 0 && buf[0] == 'g') 611 break; 612 613 if (time_after(jiffies, timeout)) { 614 err = -ETIMEDOUT; 615 break; 616 } 617 } 618 if (err) 619 goto err_upload_failed; 620 621err_upload_failed: 622 kfree(buf); 623 return err; 624} 625 626static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) 627{ 628 struct p54u_priv *priv = dev->priv; 629 const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; 630 int err, alen; 631 void *buf; 632 __le32 reg; 633 unsigned int remains, offset; 634 const u8 *data; 635 636 buf = kmalloc(512, GFP_KERNEL); 637 if (!buf) 638 return -ENOMEM; 639 640#define P54U_WRITE(type, addr, data) \ 641 do {\ 642 err = p54u_write(priv, buf, type,\ 643 cpu_to_le32((u32)(unsigned long)addr), data);\ 644 if (err) \ 645 goto fail;\ 646 } while (0) 647 648#define P54U_READ(type, addr) \ 649 do {\ 650 err = p54u_read(priv, buf, type,\ 651 cpu_to_le32((u32)(unsigned long)addr), ®);\ 652 if (err)\ 653 goto fail;\ 654 } while (0) 655 656 /* power down net2280 bridge */ 657 P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL); 658 reg |= cpu_to_le32(P54U_BRG_POWER_DOWN); 659 reg &= cpu_to_le32(~P54U_BRG_POWER_UP); 660 P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); 661 662 mdelay(100); 663 664 /* power up bridge */ 665 reg |= cpu_to_le32(P54U_BRG_POWER_UP); 666 reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN); 667 P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); 668 669 mdelay(100); 670 671 P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT, 672 cpu_to_le32(NET2280_CLK_30Mhz | 673 NET2280_PCI_ENABLE | 674 NET2280_PCI_SOFT_RESET)); 675 676 mdelay(20); 677 678 P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND, 679 cpu_to_le32(PCI_COMMAND_MEMORY | 680 PCI_COMMAND_MASTER)); 681 682 P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0, 683 cpu_to_le32(NET2280_BASE)); 684 685 P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS); 686 reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT); 687 P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg); 688 689 // TODO: we really need this? 690 P54U_READ(NET2280_BRG_U32, NET2280_RELNUM); 691 692 P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP, 693 cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); 694 P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP, 695 cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); 696 697 P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2, 698 cpu_to_le32(NET2280_BASE2)); 699 700 /* finally done setting up the bridge */ 701 702 P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND, 703 cpu_to_le32(PCI_COMMAND_MEMORY | 704 PCI_COMMAND_MASTER)); 705 706 P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0); 707 P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0, 708 cpu_to_le32(P54U_DEV_BASE)); 709 710 P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); 711 P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, 712 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); 713 714 /* do romboot */ 715 P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0); 716 717 P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); 718 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); 719 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); 720 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); 721 P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); 722 723 mdelay(20); 724 725 reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); 726 P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); 727 728 mdelay(20); 729 730 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); 731 P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); 732 733 mdelay(100); 734 735 P54U_READ(NET2280_DEV_U32, &devreg->int_ident); 736 P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); 737 738 /* finally, we can upload firmware now! */ 739 remains = priv->fw->size; 740 data = priv->fw->data; 741 offset = ISL38XX_DEV_FIRMWARE_ADDR; 742 743 while (remains) { 744 unsigned int block_len = min(remains, (unsigned int)512); 745 memcpy(buf, data, block_len); 746 747 err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); 748 if (err) { 749 dev_err(&priv->udev->dev, "(p54usb) firmware block " 750 "upload failed\n"); 751 goto fail; 752 } 753 754 P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base, 755 cpu_to_le32(0xc0000f00)); 756 757 P54U_WRITE(NET2280_DEV_U32, 758 0x0020 | (unsigned long)&devreg->direct_mem_win, 0); 759 P54U_WRITE(NET2280_DEV_U32, 760 0x0020 | (unsigned long)&devreg->direct_mem_win, 761 cpu_to_le32(1)); 762 763 P54U_WRITE(NET2280_DEV_U32, 764 0x0024 | (unsigned long)&devreg->direct_mem_win, 765 cpu_to_le32(block_len)); 766 P54U_WRITE(NET2280_DEV_U32, 767 0x0028 | (unsigned long)&devreg->direct_mem_win, 768 cpu_to_le32(offset)); 769 770 P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr, 771 cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR)); 772 P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len, 773 cpu_to_le32(block_len >> 2)); 774 P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl, 775 cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER)); 776 777 mdelay(10); 778 779 P54U_READ(NET2280_DEV_U32, 780 0x002C | (unsigned long)&devreg->direct_mem_win); 781 if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || 782 !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { 783 dev_err(&priv->udev->dev, "(p54usb) firmware DMA " 784 "transfer failed\n"); 785 goto fail; 786 } 787 788 P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT, 789 cpu_to_le32(NET2280_FIFO_FLUSH)); 790 791 remains -= block_len; 792 data += block_len; 793 offset += block_len; 794 } 795 796 /* do ramboot */ 797 P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); 798 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); 799 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); 800 reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); 801 P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); 802 803 mdelay(20); 804 805 reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); 806 P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); 807 808 reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); 809 P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); 810 811 mdelay(100); 812 813 P54U_READ(NET2280_DEV_U32, &devreg->int_ident); 814 P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); 815 816 /* start up the firmware */ 817 P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 818 cpu_to_le32(ISL38XX_INT_IDENT_INIT)); 819 820 P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, 821 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); 822 823 P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 824 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE | 825 NET2280_USB_INTERRUPT_ENABLE)); 826 827 P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int, 828 cpu_to_le32(ISL38XX_DEV_INT_RESET)); 829 830 err = usb_interrupt_msg(priv->udev, 831 usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), 832 buf, sizeof(__le32), &alen, 1000); 833 if (err || alen != sizeof(__le32)) 834 goto fail; 835 836 P54U_READ(NET2280_DEV_U32, &devreg->int_ident); 837 P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); 838 839 if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) 840 err = -EINVAL; 841 842 P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); 843 P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, 844 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); 845 846#undef P54U_WRITE 847#undef P54U_READ 848 849fail: 850 kfree(buf); 851 return err; 852} 853 854static int p54_find_type(struct p54u_priv *priv) 855{ 856 int i; 857 858 for (i = 0; i < __NUM_P54U_HWTYPES; i++) 859 if (p54u_fwlist[i].type == priv->hw_type) 860 break; 861 if (i == __NUM_P54U_HWTYPES) 862 return -EOPNOTSUPP; 863 864 return i; 865} 866 867static int p54u_start_ops(struct p54u_priv *priv) 868{ 869 struct ieee80211_hw *dev = priv->common.hw; 870 int ret; 871 872 ret = p54_parse_firmware(dev, priv->fw); 873 if (ret) 874 goto err_out; 875 876 ret = p54_find_type(priv); 877 if (ret < 0) 878 goto err_out; 879 880 if (priv->common.fw_interface != p54u_fwlist[ret].intf) { 881 dev_err(&priv->udev->dev, "wrong firmware, please get " 882 "a firmware for \"%s\" and try again.\n", 883 p54u_fwlist[ret].hw); 884 ret = -ENODEV; 885 goto err_out; 886 } 887 888 ret = priv->upload_fw(dev); 889 if (ret) 890 goto err_out; 891 892 ret = p54u_open(dev); 893 if (ret) 894 goto err_out; 895 896 ret = p54_read_eeprom(dev); 897 if (ret) 898 goto err_stop; 899 900 p54u_stop(dev); 901 902 ret = p54_register_common(dev, &priv->udev->dev); 903 if (ret) 904 goto err_stop; 905 906 return 0; 907 908err_stop: 909 p54u_stop(dev); 910 911err_out: 912 /* 913 * p54u_disconnect will do the rest of the 914 * cleanup 915 */ 916 return ret; 917} 918 919static void p54u_load_firmware_cb(const struct firmware *firmware, 920 void *context) 921{ 922 struct p54u_priv *priv = context; 923 struct usb_device *udev = priv->udev; 924 struct usb_interface *intf = priv->intf; 925 int err; 926 927 if (firmware) { 928 priv->fw = firmware; 929 err = p54u_start_ops(priv); 930 } else { 931 err = -ENOENT; 932 dev_err(&udev->dev, "Firmware not found.\n"); 933 } 934 935 complete(&priv->fw_wait_load); 936 /* 937 * At this point p54u_disconnect may have already freed 938 * the "priv" context. Do not use it anymore! 939 */ 940 priv = NULL; 941 942 if (err) { 943 dev_err(&intf->dev, "failed to initialize device (%d)\n", err); 944 945 usb_lock_device(udev); 946 usb_driver_release_interface(&p54u_driver, intf); 947 usb_unlock_device(udev); 948 } 949 950 usb_put_intf(intf); 951} 952 953static int p54u_load_firmware(struct ieee80211_hw *dev, 954 struct usb_interface *intf) 955{ 956 struct usb_device *udev = interface_to_usbdev(intf); 957 struct p54u_priv *priv = dev->priv; 958 struct device *device = &udev->dev; 959 int err, i; 960 961 BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES); 962 963 init_completion(&priv->fw_wait_load); 964 i = p54_find_type(priv); 965 if (i < 0) 966 return i; 967 968 dev_info(&priv->udev->dev, "Loading firmware file %s\n", 969 p54u_fwlist[i].fw); 970 971 usb_get_intf(intf); 972 err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw, 973 device, GFP_KERNEL, priv, 974 p54u_load_firmware_cb); 975 if (err) { 976 dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " 977 "(%d)!\n", p54u_fwlist[i].fw, err); 978 usb_put_intf(intf); 979 } 980 981 return err; 982} 983 984static int p54u_probe(struct usb_interface *intf, 985 const struct usb_device_id *id) 986{ 987 struct usb_device *udev = interface_to_usbdev(intf); 988 struct ieee80211_hw *dev; 989 struct p54u_priv *priv; 990 int err; 991 unsigned int i, recognized_pipes; 992 993 dev = p54_init_common(sizeof(*priv)); 994 995 if (!dev) { 996 dev_err(&udev->dev, "(p54usb) ieee80211 alloc failed\n"); 997 return -ENOMEM; 998 } 999 1000 priv = dev->priv; 1001 priv->hw_type = P54U_INVALID_HW; 1002 1003 SET_IEEE80211_DEV(dev, &intf->dev); 1004 usb_set_intfdata(intf, dev); 1005 priv->udev = udev; 1006 priv->intf = intf; 1007 skb_queue_head_init(&priv->rx_queue); 1008 init_usb_anchor(&priv->submitted); 1009 1010 /* really lazy and simple way of figuring out if we're a 3887 */ 1011 /* TODO: should just stick the identification in the device table */ 1012 i = intf->altsetting->desc.bNumEndpoints; 1013 recognized_pipes = 0; 1014 while (i--) { 1015 switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) { 1016 case P54U_PIPE_DATA: 1017 case P54U_PIPE_MGMT: 1018 case P54U_PIPE_BRG: 1019 case P54U_PIPE_DEV: 1020 case P54U_PIPE_DATA | USB_DIR_IN: 1021 case P54U_PIPE_MGMT | USB_DIR_IN: 1022 case P54U_PIPE_BRG | USB_DIR_IN: 1023 case P54U_PIPE_DEV | USB_DIR_IN: 1024 case P54U_PIPE_INT | USB_DIR_IN: 1025 recognized_pipes++; 1026 } 1027 } 1028 priv->common.open = p54u_open; 1029 priv->common.stop = p54u_stop; 1030 if (recognized_pipes < P54U_PIPE_NUMBER) { 1031#ifdef CONFIG_PM 1032 /* ISL3887 needs a full reset on resume */ 1033 udev->reset_resume = 1; 1034#endif /* CONFIG_PM */ 1035 err = p54u_device_reset(dev); 1036 1037 priv->hw_type = P54U_3887; 1038 dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); 1039 priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); 1040 priv->common.tx = p54u_tx_lm87; 1041 priv->upload_fw = p54u_upload_firmware_3887; 1042 } else { 1043 priv->hw_type = P54U_NET2280; 1044 dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); 1045 priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); 1046 priv->common.tx = p54u_tx_net2280; 1047 priv->upload_fw = p54u_upload_firmware_net2280; 1048 } 1049 err = p54u_load_firmware(dev, intf); 1050 if (err) 1051 p54_free_common(dev); 1052 return err; 1053} 1054 1055static void p54u_disconnect(struct usb_interface *intf) 1056{ 1057 struct ieee80211_hw *dev = usb_get_intfdata(intf); 1058 struct p54u_priv *priv; 1059 1060 if (!dev) 1061 return; 1062 1063 priv = dev->priv; 1064 wait_for_completion(&priv->fw_wait_load); 1065 p54_unregister_common(dev); 1066 1067 release_firmware(priv->fw); 1068 p54_free_common(dev); 1069} 1070 1071static int p54u_pre_reset(struct usb_interface *intf) 1072{ 1073 struct ieee80211_hw *dev = usb_get_intfdata(intf); 1074 1075 if (!dev) 1076 return -ENODEV; 1077 1078 p54u_stop(dev); 1079 return 0; 1080} 1081 1082static int p54u_resume(struct usb_interface *intf) 1083{ 1084 struct ieee80211_hw *dev = usb_get_intfdata(intf); 1085 struct p54u_priv *priv; 1086 1087 if (!dev) 1088 return -ENODEV; 1089 1090 priv = dev->priv; 1091 if (unlikely(!(priv->upload_fw && priv->fw))) 1092 return 0; 1093 1094 return priv->upload_fw(dev); 1095} 1096 1097static int p54u_post_reset(struct usb_interface *intf) 1098{ 1099 struct ieee80211_hw *dev = usb_get_intfdata(intf); 1100 struct p54u_priv *priv; 1101 int err; 1102 1103 err = p54u_resume(intf); 1104 if (err) 1105 return err; 1106 1107 /* reinitialize old device state */ 1108 priv = dev->priv; 1109 if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) 1110 ieee80211_restart_hw(dev); 1111 1112 return 0; 1113} 1114 1115#ifdef CONFIG_PM 1116 1117static int p54u_suspend(struct usb_interface *intf, pm_message_t message) 1118{ 1119 return p54u_pre_reset(intf); 1120} 1121 1122#endif /* CONFIG_PM */ 1123 1124static struct usb_driver p54u_driver = { 1125 .name = "p54usb", 1126 .id_table = p54u_table, 1127 .probe = p54u_probe, 1128 .disconnect = p54u_disconnect, 1129 .pre_reset = p54u_pre_reset, 1130 .post_reset = p54u_post_reset, 1131#ifdef CONFIG_PM 1132 .suspend = p54u_suspend, 1133 .resume = p54u_resume, 1134 .reset_resume = p54u_resume, 1135#endif /* CONFIG_PM */ 1136 .soft_unbind = 1, 1137 .disable_hub_initiated_lpm = 1, 1138}; 1139 1140module_usb_driver(p54u_driver);