wlan_if.h (23900B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries. 4 * All rights reserved. 5 */ 6 7#ifndef WILC_WLAN_IF_H 8#define WILC_WLAN_IF_H 9 10#include <linux/netdevice.h> 11#include "fw.h" 12 13/******************************************** 14 * 15 * Wlan Configuration ID 16 * 17 ********************************************/ 18 19enum bss_types { 20 WILC_FW_BSS_TYPE_INFRA = 0, 21 WILC_FW_BSS_TYPE_INDEPENDENT, 22 WILC_FW_BSS_TYPE_AP, 23}; 24 25enum { 26 WILC_FW_OPER_MODE_B_ONLY = 0, /* 1, 2 M, otherwise 5, 11 M */ 27 WILC_FW_OPER_MODE_G_ONLY, /* 6,12,24 otherwise 9,18,36,48,54 */ 28 WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */ 29 WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */ 30}; 31 32enum { 33 WILC_FW_PREAMBLE_SHORT = 0, /* Short Preamble */ 34 WILC_FW_PREAMBLE_LONG = 1, /* Long Preamble */ 35 WILC_FW_PREAMBLE_AUTO = 2, /* Auto Preamble Selection */ 36}; 37 38enum { 39 WILC_FW_PASSIVE_SCAN = 0, 40 WILC_FW_ACTIVE_SCAN = 1, 41}; 42 43enum { 44 WILC_FW_NO_POWERSAVE = 0, 45 WILC_FW_MIN_FAST_PS = 1, 46 WILC_FW_MAX_FAST_PS = 2, 47 WILC_FW_MIN_PSPOLL_PS = 3, 48 WILC_FW_MAX_PSPOLL_PS = 4 49}; 50 51enum bus_acquire { 52 WILC_BUS_ACQUIRE_ONLY = 0, 53 WILC_BUS_ACQUIRE_AND_WAKEUP = 1, 54}; 55 56enum bus_release { 57 WILC_BUS_RELEASE_ONLY = 0, 58 WILC_BUS_RELEASE_ALLOW_SLEEP = 1, 59}; 60 61enum { 62 WILC_FW_NO_ENCRYPT = 0, 63 WILC_FW_ENCRYPT_ENABLED = BIT(0), 64 WILC_FW_WEP = BIT(1), 65 WILC_FW_WEP_EXTENDED = BIT(2), 66 WILC_FW_WPA = BIT(3), 67 WILC_FW_WPA2 = BIT(4), 68 WILC_FW_AES = BIT(5), 69 WILC_FW_TKIP = BIT(6) 70}; 71 72enum { 73 WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT, 74 WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED, 75 WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP, 76 WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED, 77 WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA, 78 WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA, 79 WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED, 80 WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2, 81 WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2 82}; 83 84enum authtype { 85 WILC_FW_AUTH_OPEN_SYSTEM = 1, 86 WILC_FW_AUTH_SHARED_KEY = 2, 87 WILC_FW_AUTH_ANY = 3, 88 WILC_FW_AUTH_IEEE8021 = 5 89}; 90 91enum site_survey { 92 WILC_FW_SITE_SURVEY_1CH = 0, 93 WILC_FW_SITE_SURVEY_ALL_CH = 1, 94 WILC_FW_SITE_SURVEY_OFF = 2 95}; 96 97enum { 98 WILC_FW_ACK_POLICY_NORMAL = 0, 99 WILC_FW_ACK_NO_POLICY, 100}; 101 102enum { 103 WILC_FW_REKEY_POLICY_DISABLE = 1, 104 WILC_FW_REKEY_POLICY_TIME_BASE, 105 WILC_FW_REKEY_POLICY_PKT_BASE, 106 WILC_FW_REKEY_POLICY_TIME_PKT_BASE 107}; 108 109enum { 110 WILC_FW_FILTER_NO = 0x00, 111 WILC_FW_FILTER_AP_ONLY = 0x01, 112 WILC_FW_FILTER_STA_ONLY = 0x02 113}; 114 115enum { 116 WILC_FW_11N_PROT_AUTO = 0, /* Auto */ 117 WILC_FW_11N_NO_PROT, /* Do not use any protection */ 118 WILC_FW_11N_PROT_ERP, /* Protect all ERP frame exchanges */ 119 WILC_FW_11N_PROT_HT, /* Protect all HT frame exchanges */ 120 WILC_FW_11N_PROT_GF /* Protect all GF frame exchanges */ 121}; 122 123enum { 124 WILC_FW_ERP_PROT_SELF_CTS, 125 WILC_FW_ERP_PROT_RTS_CTS, 126}; 127 128enum { 129 WILC_FW_11N_OP_MODE_HT_MIXED = 1, 130 WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ, 131 WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ, 132}; 133 134enum { 135 WILC_FW_OBBS_NONHT_NO_DETECT = 0, 136 WILC_FW_OBBS_NONHT_DETECT_ONLY = 1, 137 WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2, 138 WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3, 139}; 140 141enum { 142 WILC_FW_HT_PROT_RTS_CTS_NONHT = 0, /* RTS-CTS at non-HT rate */ 143 WILC_FW_HT_PROT_FIRST_FRAME_NONHT, /* First frame at non-HT rate */ 144 WILC_FW_HT_PROT_LSIG_TXOP, /* LSIG TXOP Protection */ 145 WILC_FW_HT_PROT_FIRST_FRAME_MIXED, /* First frame at Mixed format */ 146}; 147 148enum { 149 WILC_FW_SMPS_MODE_STATIC = 1, 150 WILC_FW_SMPS_MODE_DYNAMIC = 2, 151 WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */ 152}; 153 154enum { 155 WILC_FW_TX_RATE_AUTO = 0, 156 WILC_FW_TX_RATE_MBPS_1 = 1, 157 WILC_FW_TX_RATE_MBPS_2 = 2, 158 WILC_FW_TX_RATE_MBPS_5_5 = 5, 159 WILC_FW_TX_RATE_MBPS_11 = 11, 160 WILC_FW_TX_RATE_MBPS_6 = 6, 161 WILC_FW_TX_RATE_MBPS_9 = 9, 162 WILC_FW_TX_RATE_MBPS_12 = 12, 163 WILC_FW_TX_RATE_MBPS_18 = 18, 164 WILC_FW_TX_RATE_MBPS_24 = 24, 165 WILC_FW_TX_RATE_MBPS_36 = 36, 166 WILC_FW_TX_RATE_MBPS_48 = 48, 167 WILC_FW_TX_RATE_MBPS_54 = 54 168}; 169 170enum { 171 WILC_FW_DEFAULT_SCAN = 0, 172 WILC_FW_USER_SCAN = BIT(0), 173 WILC_FW_OBSS_PERIODIC_SCAN = BIT(1), 174 WILC_FW_OBSS_ONETIME_SCAN = BIT(2) 175}; 176 177enum { 178 WILC_FW_ACTION_FRM_IDX = 0, 179 WILC_FW_PROBE_REQ_IDX = 1 180}; 181 182enum wid_type { 183 WID_CHAR = 0, 184 WID_SHORT = 1, 185 WID_INT = 2, 186 WID_STR = 3, 187 WID_BIN_DATA = 4, 188 WID_BIN = 5, 189}; 190 191struct wid { 192 u16 id; 193 enum wid_type type; 194 s32 size; 195 s8 *val; 196}; 197 198enum { 199 WID_NIL = 0xffff, 200 201 /* 202 * BSS Type 203 * ----------------------------------------------------------- 204 * Configuration : Infrastructure Independent Access Point 205 * Values to set : 0 1 2 206 * ----------------------------------------------------------- 207 */ 208 WID_BSS_TYPE = 0x0000, 209 210 /* 211 * Transmit Rate 212 * ----------------------------------------------------------- 213 * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 214 * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 215 * ----------------------------------------------------------- 216 */ 217 WID_CURRENT_TX_RATE = 0x0001, 218 219 /* 220 * Channel 221 * ----------------------------------------------------------- 222 * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 223 * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 224 * ----------------------------------------------------------- 225 */ 226 WID_CURRENT_CHANNEL = 0x0002, 227 228 /* 229 * Preamble 230 * ----------------------------------------------------------- 231 * Configuration : short long Auto 232 * Values to set : 0 1 2 233 * ----------------------------------------------------------- 234 */ 235 WID_PREAMBLE = 0x0003, 236 237 /* 238 * 11g operating mode (ignored if 11g not present) 239 * ----------------------------------------------------------- 240 * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) 241 * Values to set : 1 2 3 242 * ----------------------------------------------------------- 243 */ 244 WID_11G_OPERATING_MODE = 0x0004, 245 246 /* 247 * Mac status (response only) 248 * ----------------------------------------------------------- 249 * Configuration : disconnect connect 250 * Values to get : 0 1 251 * ----------------------------------------------------------- 252 */ 253 WID_STATUS = 0x0005, 254 255 /* 256 * Scan type 257 * ----------------------------------------------------------- 258 * Configuration : Passive Scanning Active Scanning 259 * Values to set : 0 1 260 * ----------------------------------------------------------- 261 */ 262 WID_SCAN_TYPE = 0x0007, 263 264 /* 265 * Key Id (WEP default key Id) 266 * ----------------------------------------------------------- 267 * Configuration : Any value between 0 to 3 268 * Values to set : Same value. Default is 0 269 * ----------------------------------------------------------- 270 */ 271 WID_KEY_ID = 0x0009, 272 273 /* 274 * QoS Enable 275 * ----------------------------------------------------------- 276 * Configuration : QoS Disable WMM Enable 277 * Values to set : 0 1 278 * ----------------------------------------------------------- 279 */ 280 WID_QOS_ENABLE = 0x000A, 281 282 /* 283 * Power Management 284 * ----------------------------------------------------------- 285 * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE 286 * Values to set : 0 1 2 287 * ----------------------------------------------------------- 288 */ 289 WID_POWER_MANAGEMENT = 0x000B, 290 291 /* 292 * WEP/802 11I Configuration 293 * ----------------------------------------------------------- 294 * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP 295 * Values (0x) : 00 03 07 29 49 31 51 296 * Configuration:WPA-AES+TKIP RSN-AES+TKIP 297 * Values (0x) : 69 71 298 * ----------------------------------------------------------- 299 */ 300 WID_11I_MODE = 0x000C, 301 302 /* 303 * WEP Configuration: Used in BSS STA mode only when WEP is enabled 304 * ----------------------------------------------------------- 305 * Configuration : Open System Shared Key Any Type | 802.1x Auth 306 * Values (0x) : 01 02 03 | BIT2 307 * ----------------------------------------------------------- 308 */ 309 WID_AUTH_TYPE = 0x000D, 310 311 /* 312 * Site Survey Type 313 * ----------------------------------------------------------- 314 * Configuration : Values to set 315 * Survey 1 Channel : 0 316 * survey all Channels : 1 317 * Disable Site Survey : 2 318 * ----------------------------------------------------------- 319 */ 320 WID_SITE_SURVEY = 0x000E, 321 322 /* 323 * Listen Interval 324 * ----------------------------------------------------------- 325 * Configuration : Any value between 1 to 255 326 * Values to set : Same value. Default is 3 327 * ----------------------------------------------------------- 328 */ 329 WID_LISTEN_INTERVAL = 0x000F, 330 331 /* 332 * DTIM Period 333 * ----------------------------------------------------------- 334 * Configuration : Any value between 1 to 255 335 * Values to set : Same value. Default is 3 336 * ----------------------------------------------------------- 337 */ 338 WID_DTIM_PERIOD = 0x0010, 339 340 /* 341 * ACK Policy 342 * ----------------------------------------------------------- 343 * Configuration : Normal Ack No Ack 344 * Values to set : 0 1 345 * ----------------------------------------------------------- 346 */ 347 WID_ACK_POLICY = 0x0011, 348 349 /* 350 * Reset MAC (Set only) 351 * ----------------------------------------------------------- 352 * Configuration : Don't Reset Reset No Request 353 * Values to set : 0 1 2 354 * ----------------------------------------------------------- 355 */ 356 WID_RESET = 0x0012, 357 358 /* 359 * Broadcast SSID Option: Setting this will adhere to "" SSID element 360 * ----------------------------------------------------------- 361 * Configuration : Enable Disable 362 * Values to set : 1 0 363 * ----------------------------------------------------------- 364 */ 365 WID_BCAST_SSID = 0x0015, 366 367 /* 368 * Disconnect (Station) 369 * ----------------------------------------------------------- 370 * Configuration : Association ID 371 * Values to set : Association ID 372 * ----------------------------------------------------------- 373 */ 374 WID_DISCONNECT = 0x0016, 375 376 /* 377 * 11a Tx Power Level 378 * ----------------------------------------------------------- 379 * Configuration : Sets TX Power (Higher the value greater the power) 380 * Values to set : Any value between 0 and 63 (inclusive Default 48) 381 * ----------------------------------------------------------- 382 */ 383 WID_TX_POWER_LEVEL_11A = 0x0018, 384 385 /* 386 * Group Key Update Policy Selection 387 * ----------------------------------------------------------- 388 * Configuration : Disabled timeBased packetBased timePacketBased 389 * Values to set : 1 2 3 4 390 * ----------------------------------------------------------- 391 */ 392 WID_REKEY_POLICY = 0x0019, 393 394 /* 395 * Allow Short Slot 396 * ----------------------------------------------------------- 397 * Configuration : Disallow Short Slot Allow Short Slot 398 * (Enable Only Long Slot) (Enable Short Slot if applicable) 399 * Values to set : 0 1 400 * ----------------------------------------------------------- 401 */ 402 WID_SHORT_SLOT_ALLOWED = 0x001A, 403 404 WID_PHY_ACTIVE_REG = 0x001B, 405 406 /* 407 * 11b Tx Power Level 408 * ----------------------------------------------------------- 409 * Configuration : Sets TX Power (Higher the value greater the power) 410 * Values to set : Any value between 0 and 63 (inclusive Default 48) 411 * ----------------------------------------------------------- 412 */ 413 WID_TX_POWER_LEVEL_11B = 0x001D, 414 415 /* 416 * Scan Request 417 * ----------------------------------------------------------- 418 * Configuration : Request default scan 419 * Values to set : 0 420 * ----------------------------------------------------------- 421 */ 422 WID_START_SCAN_REQ = 0x001E, 423 424 /* 425 * Rssi (get only) 426 * ----------------------------------------------------------- 427 * Configuration : 428 * Values to get : Rssi value 429 * ----------------------------------------------------------- 430 */ 431 WID_RSSI = 0x001F, 432 433 /* 434 * Join Request 435 * ----------------------------------------------------------- 436 * Configuration : Request to join 437 * Values to set : index of scan result 438 * ----------------------------------------------------------- 439 */ 440 WID_JOIN_REQ = 0x0020, 441 442 WID_LINKSPEED = 0x0026, 443 444 /* 445 * Enable User Control of TX Power 446 * ----------------------------------------------------------- 447 * Configuration : Disable Enable 448 * Values to set : 0 1 449 * ----------------------------------------------------------- 450 */ 451 WID_USER_CONTROL_ON_TX_POWER = 0x0027, 452 453 WID_MEMORY_ACCESS_8BIT = 0x0029, 454 455 /* 456 * Enable Auto RX Sensitivity feature 457 * ----------------------------------------------------------- 458 * Configuration : Disable Enable 459 * Values to set : 0 1 460 * ----------------------------------------------------------- 461 */ 462 WID_AUTO_RX_SENSITIVITY = 0x0032, 463 464 /* 465 * Receive Buffer Based Ack 466 * ----------------------------------------------------------- 467 * Configuration : Disable Enable 468 * Values to set : 0 1 469 * ----------------------------------------------------------- 470 */ 471 WID_DATAFLOW_CONTROL = 0x0033, 472 473 /* 474 * Scan Filter 475 * ----------------------------------------------------------- 476 * Configuration : Class No filter AP only Station Only 477 * Values to set : 0 1 2 478 * Configuration : Priority High Rssi Low Rssi Detect 479 * Values to set : 0 0x4 0x0 480 * Configuration : Channel filter off filter on 481 * Values to set : 0 0x10 482 * ----------------------------------------------------------- 483 */ 484 WID_SCAN_FILTER = 0x0036, 485 486 /* 487 * Link Loss Threshold (measure in the beacon period) 488 * ----------------------------------------------------------- 489 * Configuration : Any value between 10 and 254(Set to 255 disable) 490 * Values to set : Same value. Default is 10 491 * ----------------------------------------------------------- 492 */ 493 WID_LINK_LOSS_THRESHOLD = 0x0037, 494 495 WID_ABORT_RUNNING_SCAN = 0x003E, 496 497 /* NMAC Character WID list */ 498 WID_WPS_START = 0x0043, 499 500 /* 501 * Protection mode for MAC 502 * ----------------------------------------------------------- 503 * Configuration : Auto No protection ERP HT GF 504 * Values to set : 0 1 2 3 4 505 * ----------------------------------------------------------- 506 */ 507 WID_11N_PROT_MECH = 0x0080, 508 509 /* 510 * ERP Protection type for MAC 511 * ----------------------------------------------------------- 512 * Configuration : Self-CTS RTS-CTS 513 * Values to set : 0 1 514 * ----------------------------------------------------------- 515 */ 516 WID_11N_ERP_PROT_TYPE = 0x0081, 517 518 /* 519 * HT Option Enable 520 * ----------------------------------------------------------- 521 * Configuration : HT Enable HT Disable 522 * Values to set : 1 0 523 * ----------------------------------------------------------- 524 */ 525 WID_11N_ENABLE = 0x0082, 526 527 /* 528 * 11n Operating mode (Note that 11g operating mode will also be 529 * used in addition to this, if this is set to HT Mixed mode) 530 * ----------------------------------------------------------- 531 * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz 532 * Values to set : 1 2 3 533 * ----------------------------------------------------------- 534 */ 535 WID_11N_OPERATING_MODE = 0x0083, 536 537 /* 538 * 11n OBSS non-HT STA Detection flag 539 * ----------------------------------------------------------- 540 * Configuration : Do not detect 541 * Values to set : 0 542 * Configuration : Detect, do not protect or report 543 * Values to set : 1 544 * Configuration : Detect, protect and do not report 545 * Values to set : 2 546 * Configuration : Detect, protect and report to other BSS 547 * Values to set : 3 548 * ----------------------------------------------------------- 549 */ 550 WID_11N_OBSS_NONHT_DETECTION = 0x0084, 551 552 /* 553 * 11n HT Protection Type 554 * ----------------------------------------------------------- 555 * Configuration : RTS-CTS First Frame Exchange at non-HT-rate 556 * Values to set : 0 1 557 * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt 558 * Values to set : 2 3 559 * ----------------------------------------------------------- 560 */ 561 WID_11N_HT_PROT_TYPE = 0x0085, 562 563 /* 564 * 11n RIFS Protection Enable Flag 565 * ----------------------------------------------------------- 566 * Configuration : Disable Enable 567 * Values to set : 0 1 568 * ----------------------------------------------------------- 569 */ 570 WID_11N_RIFS_PROT_ENABLE = 0x0086, 571 572 /* 573 * SMPS Mode 574 * ----------------------------------------------------------- 575 * Configuration : Static Dynamic MIMO (Power Save Disabled) 576 * Values to set : 1 2 3 577 * ----------------------------------------------------------- 578 */ 579 WID_11N_SMPS_MODE = 0x0087, 580 581 /* 582 * Current transmit MCS 583 * ----------------------------------------------------------- 584 * Configuration : MCS Index for data rate 585 * Values to set : 0 to 7 586 * ----------------------------------------------------------- 587 */ 588 WID_11N_CURRENT_TX_MCS = 0x0088, 589 590 WID_11N_PRINT_STATS = 0x0089, 591 592 /* 593 * 11n Short GI Enable Flag 594 * ----------------------------------------------------------- 595 * Configuration : Disable Enable 596 * Values to set : 0 1 597 * ----------------------------------------------------------- 598 */ 599 WID_11N_SHORT_GI_ENABLE = 0x008D, 600 601 /* 602 * 11n RIFS Enable Flag 603 * ----------------------------------------------------------- 604 * Configuration : Disable Enable 605 * Values to set : 0 1 606 * ----------------------------------------------------------- 607 */ 608 WID_RIFS_MODE = 0x0094, 609 610 /* 611 * TX Abort Feature 612 * ----------------------------------------------------------- 613 * Configuration : Disable Self CTS Enable Self CTS 614 * Values to set : 0 1 615 * Configuration : Disable TX Abort Enable TX Abort 616 * Values to set : 2 3 617 * Configuration : Enable HW TX Abort Enable SW TX Abort 618 * Values to set : 4 5 619 * ----------------------------------------------------------- 620 */ 621 WID_TX_ABORT_CONFIG = 0x00A1, 622 623 WID_REG_TSSI_11B_VALUE = 0x00A6, 624 WID_REG_TSSI_11G_VALUE = 0x00A7, 625 WID_REG_TSSI_11N_VALUE = 0x00A8, 626 WID_TX_CALIBRATION = 0x00A9, 627 WID_DSCR_TSSI_11B_VALUE = 0x00AA, 628 WID_DSCR_TSSI_11G_VALUE = 0x00AB, 629 WID_DSCR_TSSI_11N_VALUE = 0x00AC, 630 631 /* 632 * Immediate Block-Ack Support 633 * ----------------------------------------------------------- 634 * Configuration : Disable Enable 635 * Values to set : 0 1 636 * ----------------------------------------------------------- 637 */ 638 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, 639 640 /* 641 * TXOP Disable Flag 642 * ----------------------------------------------------------- 643 * Configuration : Disable Enable 644 * Values to set : 1 0 645 * ----------------------------------------------------------- 646 */ 647 WID_11N_TXOP_PROT_DISABLE = 0x00B0, 648 649 WID_TX_POWER_LEVEL_11N = 0x00B1, 650 651 /* Custom Character WID list */ 652 /* SCAN Complete notification WID*/ 653 WID_SCAN_COMPLETE = 0x00C9, 654 655 WID_DEL_BEACON = 0x00CA, 656 657 WID_LOG_TERMINAL_SWITCH = 0x00CD, 658 WID_TX_POWER = 0x00CE, 659 WID_WOWLAN_TRIGGER = 0X00CF, 660 /* EMAC Short WID list */ 661 /* RTS Threshold */ 662 /* 663 * ----------------------------------------------------------- 664 * Configuration : Any value between 256 to 2347 665 * Values to set : Same value. Default is 2347 666 * ----------------------------------------------------------- 667 */ 668 WID_RTS_THRESHOLD = 0x1000, 669 670 /* 671 * Fragmentation Threshold 672 * ----------------------------------------------------------- 673 * Configuration : Any value between 256 to 2346 674 * Values to set : Same value. Default is 2346 675 * ----------------------------------------------------------- 676 */ 677 WID_FRAG_THRESHOLD = 0x1001, 678 679 WID_SHORT_RETRY_LIMIT = 0x1002, 680 WID_LONG_RETRY_LIMIT = 0x1003, 681 WID_BEACON_INTERVAL = 0x1006, 682 WID_MEMORY_ACCESS_16BIT = 0x1008, 683 WID_PASSIVE_SCAN_TIME = 0x100D, 684 WID_JOIN_START_TIMEOUT = 0x100F, 685 WID_ASOC_TIMEOUT = 0x1011, 686 WID_11I_PROTOCOL_TIMEOUT = 0x1012, 687 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, 688 689 /* NMAC Short WID list */ 690 WID_11N_SIG_QUAL_VAL = 0x1085, 691 WID_CCA_THRESHOLD = 0x1087, 692 693 /* Custom Short WID list */ 694 695 /* EMAC Integer WID list */ 696 WID_FAILED_COUNT = 0x2000, 697 WID_RETRY_COUNT = 0x2001, 698 WID_MULTIPLE_RETRY_COUNT = 0x2002, 699 WID_FRAME_DUPLICATE_COUNT = 0x2003, 700 WID_ACK_FAILURE_COUNT = 0x2004, 701 WID_RECEIVED_FRAGMENT_COUNT = 0x2005, 702 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, 703 WID_FCS_ERROR_COUNT = 0x2007, 704 WID_SUCCESS_FRAME_COUNT = 0x2008, 705 WID_HUT_TX_COUNT = 0x200A, 706 WID_TX_FRAGMENT_COUNT = 0x200B, 707 WID_TX_MULTICAST_FRAME_COUNT = 0x200C, 708 WID_RTS_SUCCESS_COUNT = 0x200D, 709 WID_RTS_FAILURE_COUNT = 0x200E, 710 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, 711 WID_REKEY_PERIOD = 0x2010, 712 WID_REKEY_PACKET_COUNT = 0x2011, 713 WID_1X_SERV_ADDR = 0x2012, 714 WID_STACK_IP_ADDR = 0x2013, 715 WID_STACK_NETMASK_ADDR = 0x2014, 716 WID_HW_RX_COUNT = 0x2015, 717 WID_MEMORY_ADDRESS = 0x201E, 718 WID_MEMORY_ACCESS_32BIT = 0x201F, 719 720 /* NMAC Integer WID list */ 721 /* Custom Integer WID list */ 722 WID_GET_INACTIVE_TIME = 0x2084, 723 /* EMAC String WID list */ 724 WID_SSID = 0x3000, 725 WID_FIRMWARE_VERSION = 0x3001, 726 WID_OPERATIONAL_RATE_SET = 0x3002, 727 WID_BSSID = 0x3003, 728 WID_WEP_KEY_VALUE = 0x3004, 729 WID_11I_PSK = 0x3008, 730 WID_11E_P_ACTION_REQ = 0x3009, 731 WID_1X_KEY = 0x300A, 732 WID_HARDWARE_VERSION = 0x300B, 733 WID_MAC_ADDR = 0x300C, 734 WID_HUT_DEST_ADDR = 0x300D, 735 WID_PHY_VERSION = 0x300F, 736 WID_SUPP_USERNAME = 0x3010, 737 WID_SUPP_PASSWORD = 0x3011, 738 WID_SITE_SURVEY_RESULTS = 0x3012, 739 WID_RX_POWER_LEVEL = 0x3013, 740 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, 741 WID_ADD_WEP_KEY = 0x3019, 742 WID_REMOVE_WEP_KEY = 0x301A, 743 WID_ADD_PTK = 0x301B, 744 WID_ADD_RX_GTK = 0x301C, 745 WID_ADD_TX_GTK = 0x301D, 746 WID_REMOVE_KEY = 0x301E, 747 WID_ASSOC_REQ_INFO = 0x301F, 748 WID_ASSOC_RES_INFO = 0x3020, 749 WID_MANUFACTURER = 0x3026, /* Added for CAPI tool */ 750 WID_MODEL_NAME = 0x3027, /* Added for CAPI tool */ 751 WID_MODEL_NUM = 0x3028, /* Added for CAPI tool */ 752 WID_DEVICE_NAME = 0x3029, /* Added for CAPI tool */ 753 754 /* NMAC String WID list */ 755 WID_SET_OPERATION_MODE = 0x3079, 756 WID_11N_P_ACTION_REQ = 0x3080, 757 WID_HUT_TEST_ID = 0x3081, 758 WID_PMKID_INFO = 0x3082, 759 WID_FIRMWARE_INFO = 0x3083, 760 WID_REGISTER_FRAME = 0x3084, 761 WID_DEL_ALL_STA = 0x3085, 762 WID_REMAIN_ON_CHAN = 0x3996, 763 WID_SSID_PROBE_REQ = 0x3997, 764 WID_JOIN_REQ_EXTENDED = 0x3998, 765 766 WID_IP_ADDRESS = 0x3999, 767 768 /* Custom String WID list */ 769 770 /* EMAC Binary WID list */ 771 WID_UAPSD_CONFIG = 0x4001, 772 WID_UAPSD_STATUS = 0x4002, 773 WID_WMM_AP_AC_PARAMS = 0x4003, 774 WID_WMM_STA_AC_PARAMS = 0x4004, 775 WID_NETWORK_INFO = 0x4005, 776 WID_STA_JOIN_INFO = 0x4006, 777 WID_CONNECTED_STA_LIST = 0x4007, 778 779 /* NMAC Binary WID list */ 780 WID_11N_AUTORATE_TABLE = 0x4080, 781 782 WID_SCAN_CHANNEL_LIST = 0x4084, 783 784 WID_INFO_ELEMENT_PROBE = 0x4085, 785 WID_INFO_ELEMENT_ASSOCIATE = 0x4086, 786 WID_ADD_STA = 0X4087, 787 WID_REMOVE_STA = 0X4088, 788 WID_EDIT_STA = 0X4089, 789 WID_ADD_BEACON = 0x408a, 790 791 WID_SETUP_MULTICAST_FILTER = 0x408b, 792 793 /* Miscellaneous WIDs */ 794 WID_ALL = 0x7FFE, 795 WID_MAX = 0xFFFF 796}; 797 798#endif