rt2800usb.c (34813B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> 4 Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> 5 Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> 6 Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> 7 Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> 8 Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org> 9 <http://rt2x00.serialmonkey.com> 10 11 */ 12 13/* 14 Module: rt2800usb 15 Abstract: rt2800usb device specific routines. 16 Supported chipsets: RT2800U. 17 */ 18 19#include <linux/delay.h> 20#include <linux/etherdevice.h> 21#include <linux/kernel.h> 22#include <linux/module.h> 23#include <linux/usb.h> 24 25#include "rt2x00.h" 26#include "rt2x00usb.h" 27#include "rt2800lib.h" 28#include "rt2800.h" 29#include "rt2800usb.h" 30 31/* 32 * Allow hardware encryption to be disabled. 33 */ 34static bool modparam_nohwcrypt; 35module_param_named(nohwcrypt, modparam_nohwcrypt, bool, 0444); 36MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); 37 38static bool rt2800usb_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) 39{ 40 return modparam_nohwcrypt; 41} 42 43/* 44 * Queue handlers. 45 */ 46static void rt2800usb_start_queue(struct data_queue *queue) 47{ 48 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; 49 u32 reg; 50 51 switch (queue->qid) { 52 case QID_RX: 53 reg = rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL); 54 rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); 55 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); 56 break; 57 case QID_BEACON: 58 reg = rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG); 59 rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); 60 rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); 61 rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); 62 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); 63 break; 64 default: 65 break; 66 } 67} 68 69static void rt2800usb_stop_queue(struct data_queue *queue) 70{ 71 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; 72 u32 reg; 73 74 switch (queue->qid) { 75 case QID_RX: 76 reg = rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL); 77 rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); 78 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); 79 break; 80 case QID_BEACON: 81 reg = rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG); 82 rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); 83 rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); 84 rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); 85 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); 86 break; 87 default: 88 break; 89 } 90} 91 92#define TXSTATUS_READ_INTERVAL 1000000 93 94static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev, 95 int urb_status, u32 tx_status) 96{ 97 bool valid; 98 99 if (urb_status) { 100 rt2x00_warn(rt2x00dev, "TX status read failed %d\n", 101 urb_status); 102 103 goto stop_reading; 104 } 105 106 valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID); 107 if (valid) { 108 if (!kfifo_put(&rt2x00dev->txstatus_fifo, tx_status)) 109 rt2x00_warn(rt2x00dev, "TX status FIFO overrun\n"); 110 111 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); 112 113 /* Reschedule urb to read TX status again instantly */ 114 return true; 115 } 116 117 /* Check if there is any entry that timedout waiting on TX status */ 118 if (rt2800_txstatus_timeout(rt2x00dev)) 119 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); 120 121 if (rt2800_txstatus_pending(rt2x00dev)) { 122 /* Read register after 1 ms */ 123 hrtimer_start(&rt2x00dev->txstatus_timer, 124 TXSTATUS_READ_INTERVAL, 125 HRTIMER_MODE_REL); 126 return false; 127 } 128 129stop_reading: 130 clear_bit(TX_STATUS_READING, &rt2x00dev->flags); 131 /* 132 * There is small race window above, between txstatus pending check and 133 * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck 134 * here again if status reading is needed. 135 */ 136 if (rt2800_txstatus_pending(rt2x00dev) && 137 !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags)) 138 return true; 139 else 140 return false; 141} 142 143static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev) 144{ 145 146 if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags)) 147 return; 148 149 /* Read TX_STA_FIFO register after 2 ms */ 150 hrtimer_start(&rt2x00dev->txstatus_timer, 151 2 * TXSTATUS_READ_INTERVAL, 152 HRTIMER_MODE_REL); 153} 154 155static void rt2800usb_tx_dma_done(struct queue_entry *entry) 156{ 157 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; 158 159 rt2800usb_async_read_tx_status(rt2x00dev); 160} 161 162static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer) 163{ 164 struct rt2x00_dev *rt2x00dev = 165 container_of(timer, struct rt2x00_dev, txstatus_timer); 166 167 rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO, 168 rt2800usb_tx_sta_fifo_read_completed); 169 170 return HRTIMER_NORESTART; 171} 172 173/* 174 * Firmware functions 175 */ 176static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev) 177{ 178 __le32 *reg; 179 u32 fw_mode; 180 int ret; 181 182 reg = kmalloc(sizeof(*reg), GFP_KERNEL); 183 if (reg == NULL) 184 return -ENOMEM; 185 /* cannot use rt2x00usb_register_read here as it uses different 186 * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the 187 * magic value USB_MODE_AUTORUN (0x11) to the device, thus the 188 * returned value would be invalid. 189 */ 190 ret = rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE, 191 USB_VENDOR_REQUEST_IN, 0, 192 USB_MODE_AUTORUN, reg, sizeof(*reg), 193 REGISTER_TIMEOUT_FIRMWARE); 194 fw_mode = le32_to_cpu(*reg); 195 kfree(reg); 196 if (ret < 0) 197 return ret; 198 199 if ((fw_mode & 0x00000003) == 2) 200 return 1; 201 202 return 0; 203} 204 205static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) 206{ 207 return FIRMWARE_RT2870; 208} 209 210static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, 211 const u8 *data, const size_t len) 212{ 213 int status; 214 u32 offset; 215 u32 length; 216 int retval; 217 218 /* 219 * Check which section of the firmware we need. 220 */ 221 if (rt2x00_rt(rt2x00dev, RT2860) || 222 rt2x00_rt(rt2x00dev, RT2872) || 223 rt2x00_rt(rt2x00dev, RT3070)) { 224 offset = 0; 225 length = 4096; 226 } else { 227 offset = 4096; 228 length = 4096; 229 } 230 231 /* 232 * Write firmware to device. 233 */ 234 retval = rt2800usb_autorun_detect(rt2x00dev); 235 if (retval < 0) 236 return retval; 237 if (retval) { 238 rt2x00_info(rt2x00dev, 239 "Firmware loading not required - NIC in AutoRun mode\n"); 240 __clear_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); 241 } else { 242 rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, 243 data + offset, length); 244 } 245 246 rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); 247 rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); 248 249 /* 250 * Send firmware request to device to load firmware, 251 * we need to specify a long timeout time. 252 */ 253 status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 254 0, USB_MODE_FIRMWARE, 255 REGISTER_TIMEOUT_FIRMWARE); 256 if (status < 0) { 257 rt2x00_err(rt2x00dev, "Failed to write Firmware to device\n"); 258 return status; 259 } 260 261 msleep(10); 262 rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); 263 264 return 0; 265} 266 267/* 268 * Device state switch handlers. 269 */ 270static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) 271{ 272 u32 reg; 273 274 /* 275 * Wait until BBP and RF are ready. 276 */ 277 if (rt2800_wait_csr_ready(rt2x00dev)) 278 return -EBUSY; 279 280 reg = rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL); 281 rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); 282 283 reg = 0; 284 rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); 285 rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); 286 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); 287 288 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, 289 USB_MODE_RESET, REGISTER_TIMEOUT); 290 291 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); 292 293 return 0; 294} 295 296static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) 297{ 298 u32 reg = 0; 299 300 if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev))) 301 return -EIO; 302 303 rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); 304 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0); 305 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128); 306 /* 307 * Total room for RX frames in kilobytes, PBF might still exceed 308 * this limit so reduce the number to prevent errors. 309 */ 310 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, 311 ((rt2x00dev->rx->limit * DATA_FRAME_SIZE) 312 / 1024) - 3); 313 rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); 314 rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); 315 rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); 316 317 return rt2800_enable_radio(rt2x00dev); 318} 319 320static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) 321{ 322 rt2800_disable_radio(rt2x00dev); 323} 324 325static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, 326 enum dev_state state) 327{ 328 if (state == STATE_AWAKE) 329 rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2); 330 else 331 rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2); 332 333 return 0; 334} 335 336static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, 337 enum dev_state state) 338{ 339 int retval = 0; 340 341 switch (state) { 342 case STATE_RADIO_ON: 343 /* 344 * Before the radio can be enabled, the device first has 345 * to be woken up. After that it needs a bit of time 346 * to be fully awake and then the radio can be enabled. 347 */ 348 rt2800usb_set_state(rt2x00dev, STATE_AWAKE); 349 msleep(1); 350 retval = rt2800usb_enable_radio(rt2x00dev); 351 break; 352 case STATE_RADIO_OFF: 353 /* 354 * After the radio has been disabled, the device should 355 * be put to sleep for powersaving. 356 */ 357 rt2800usb_disable_radio(rt2x00dev); 358 rt2800usb_set_state(rt2x00dev, STATE_SLEEP); 359 break; 360 case STATE_RADIO_IRQ_ON: 361 case STATE_RADIO_IRQ_OFF: 362 /* No support, but no error either */ 363 break; 364 case STATE_DEEP_SLEEP: 365 case STATE_SLEEP: 366 case STATE_STANDBY: 367 case STATE_AWAKE: 368 retval = rt2800usb_set_state(rt2x00dev, state); 369 break; 370 default: 371 retval = -ENOTSUPP; 372 break; 373 } 374 375 if (unlikely(retval)) 376 rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", 377 state, retval); 378 379 return retval; 380} 381 382static unsigned int rt2800usb_get_dma_done(struct data_queue *queue) 383{ 384 struct queue_entry *entry; 385 386 entry = rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE); 387 return entry->entry_idx; 388} 389 390/* 391 * TX descriptor initialization 392 */ 393static __le32 *rt2800usb_get_txwi(struct queue_entry *entry) 394{ 395 if (entry->queue->qid == QID_BEACON) 396 return (__le32 *) (entry->skb->data); 397 else 398 return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); 399} 400 401static void rt2800usb_write_tx_desc(struct queue_entry *entry, 402 struct txentry_desc *txdesc) 403{ 404 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); 405 __le32 *txi = (__le32 *) entry->skb->data; 406 u32 word; 407 408 /* 409 * Initialize TXINFO descriptor 410 */ 411 word = rt2x00_desc_read(txi, 0); 412 413 /* 414 * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is 415 * TXWI + 802.11 header + L2 pad + payload + pad, 416 * so need to decrease size of TXINFO. 417 */ 418 rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, 419 roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE); 420 rt2x00_set_field32(&word, TXINFO_W0_WIV, 421 !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); 422 rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); 423 rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); 424 rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0); 425 rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST, 426 test_bit(ENTRY_TXD_BURST, &txdesc->flags)); 427 rt2x00_desc_write(txi, 0, word); 428 429 /* 430 * Register descriptor details in skb frame descriptor. 431 */ 432 skbdesc->flags |= SKBDESC_DESC_IN_SKB; 433 skbdesc->desc = txi; 434 skbdesc->desc_len = TXINFO_DESC_SIZE + entry->queue->winfo_size; 435} 436 437/* 438 * TX data initialization 439 */ 440static int rt2800usb_get_tx_data_len(struct queue_entry *entry) 441{ 442 /* 443 * pad(1~3 bytes) is needed after each 802.11 payload. 444 * USB end pad(4 bytes) is needed at each USB bulk out packet end. 445 * TX frame format is : 446 * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad | 447 * |<------------- tx_pkt_len ------------->| 448 */ 449 450 return roundup(entry->skb->len, 4) + 4; 451} 452 453/* 454 * TX control handlers 455 */ 456static void rt2800usb_work_txdone(struct work_struct *work) 457{ 458 struct rt2x00_dev *rt2x00dev = 459 container_of(work, struct rt2x00_dev, txdone_work); 460 461 while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) || 462 rt2800_txstatus_timeout(rt2x00dev)) { 463 464 rt2800_txdone(rt2x00dev, UINT_MAX); 465 466 rt2800_txdone_nostatus(rt2x00dev); 467 468 /* 469 * The hw may delay sending the packet after DMA complete 470 * if the medium is busy, thus the TX_STA_FIFO entry is 471 * also delayed -> use a timer to retrieve it. 472 */ 473 if (rt2800_txstatus_pending(rt2x00dev)) 474 rt2800usb_async_read_tx_status(rt2x00dev); 475 } 476} 477 478/* 479 * RX control handlers 480 */ 481static void rt2800usb_fill_rxdone(struct queue_entry *entry, 482 struct rxdone_entry_desc *rxdesc) 483{ 484 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); 485 __le32 *rxi = (__le32 *)entry->skb->data; 486 __le32 *rxd; 487 u32 word; 488 int rx_pkt_len; 489 490 /* 491 * Copy descriptor to the skbdesc->desc buffer, making it safe from 492 * moving of frame data in rt2x00usb. 493 */ 494 memcpy(skbdesc->desc, rxi, skbdesc->desc_len); 495 496 /* 497 * RX frame format is : 498 * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad | 499 * |<------------ rx_pkt_len -------------->| 500 */ 501 word = rt2x00_desc_read(rxi, 0); 502 rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN); 503 504 /* 505 * Remove the RXINFO structure from the sbk. 506 */ 507 skb_pull(entry->skb, RXINFO_DESC_SIZE); 508 509 /* 510 * Check for rx_pkt_len validity. Return if invalid, leaving 511 * rxdesc->size zeroed out by the upper level. 512 */ 513 if (unlikely(rx_pkt_len == 0 || 514 rx_pkt_len > entry->queue->data_size)) { 515 rt2x00_err(entry->queue->rt2x00dev, 516 "Bad frame size %d, forcing to 0\n", rx_pkt_len); 517 return; 518 } 519 520 rxd = (__le32 *)(entry->skb->data + rx_pkt_len); 521 522 /* 523 * It is now safe to read the descriptor on all architectures. 524 */ 525 word = rt2x00_desc_read(rxd, 0); 526 527 if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR)) 528 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; 529 530 rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR); 531 532 if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) { 533 /* 534 * Hardware has stripped IV/EIV data from 802.11 frame during 535 * decryption. Unfortunately the descriptor doesn't contain 536 * any fields with the EIV/IV data either, so they can't 537 * be restored by rt2x00lib. 538 */ 539 rxdesc->flags |= RX_FLAG_IV_STRIPPED; 540 541 /* 542 * The hardware has already checked the Michael Mic and has 543 * stripped it from the frame. Signal this to mac80211. 544 */ 545 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; 546 547 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) { 548 rxdesc->flags |= RX_FLAG_DECRYPTED; 549 } else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) { 550 /* 551 * In order to check the Michael Mic, the packet must have 552 * been decrypted. Mac80211 doesnt check the MMIC failure 553 * flag to initiate MMIC countermeasures if the decoded flag 554 * has not been set. 555 */ 556 rxdesc->flags |= RX_FLAG_DECRYPTED; 557 558 rxdesc->flags |= RX_FLAG_MMIC_ERROR; 559 } 560 } 561 562 if (rt2x00_get_field32(word, RXD_W0_MY_BSS)) 563 rxdesc->dev_flags |= RXDONE_MY_BSS; 564 565 if (rt2x00_get_field32(word, RXD_W0_L2PAD)) 566 rxdesc->dev_flags |= RXDONE_L2PAD; 567 568 /* 569 * Remove RXD descriptor from end of buffer. 570 */ 571 skb_trim(entry->skb, rx_pkt_len); 572 573 /* 574 * Process the RXWI structure. 575 */ 576 rt2800_process_rxwi(entry, rxdesc); 577} 578 579/* 580 * Device probe functions. 581 */ 582static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev) 583{ 584 int retval; 585 586 retval = rt2800usb_autorun_detect(rt2x00dev); 587 if (retval < 0) 588 return retval; 589 if (retval) 590 return 1; 591 return rt2800_efuse_detect(rt2x00dev); 592} 593 594static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) 595{ 596 int retval; 597 598 retval = rt2800usb_efuse_detect(rt2x00dev); 599 if (retval < 0) 600 return retval; 601 if (retval) 602 retval = rt2800_read_eeprom_efuse(rt2x00dev); 603 else 604 retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, 605 EEPROM_SIZE); 606 607 return retval; 608} 609 610static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) 611{ 612 int retval; 613 614 retval = rt2800_probe_hw(rt2x00dev); 615 if (retval) 616 return retval; 617 618 /* 619 * Set txstatus timer function. 620 */ 621 rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout; 622 623 /* 624 * Overwrite TX done handler 625 */ 626 INIT_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone); 627 628 return 0; 629} 630 631static const struct ieee80211_ops rt2800usb_mac80211_ops = { 632 .tx = rt2x00mac_tx, 633 .start = rt2x00mac_start, 634 .stop = rt2x00mac_stop, 635 .add_interface = rt2x00mac_add_interface, 636 .remove_interface = rt2x00mac_remove_interface, 637 .config = rt2x00mac_config, 638 .configure_filter = rt2x00mac_configure_filter, 639 .set_tim = rt2x00mac_set_tim, 640 .set_key = rt2x00mac_set_key, 641 .sw_scan_start = rt2x00mac_sw_scan_start, 642 .sw_scan_complete = rt2x00mac_sw_scan_complete, 643 .get_stats = rt2x00mac_get_stats, 644 .get_key_seq = rt2800_get_key_seq, 645 .set_rts_threshold = rt2800_set_rts_threshold, 646 .sta_add = rt2800_sta_add, 647 .sta_remove = rt2800_sta_remove, 648 .bss_info_changed = rt2x00mac_bss_info_changed, 649 .conf_tx = rt2800_conf_tx, 650 .get_tsf = rt2800_get_tsf, 651 .rfkill_poll = rt2x00mac_rfkill_poll, 652 .ampdu_action = rt2800_ampdu_action, 653 .flush = rt2x00mac_flush, 654 .get_survey = rt2800_get_survey, 655 .get_ringparam = rt2x00mac_get_ringparam, 656 .tx_frames_pending = rt2x00mac_tx_frames_pending, 657 .reconfig_complete = rt2x00mac_reconfig_complete, 658}; 659 660static const struct rt2800_ops rt2800usb_rt2800_ops = { 661 .register_read = rt2x00usb_register_read, 662 .register_read_lock = rt2x00usb_register_read_lock, 663 .register_write = rt2x00usb_register_write, 664 .register_write_lock = rt2x00usb_register_write_lock, 665 .register_multiread = rt2x00usb_register_multiread, 666 .register_multiwrite = rt2x00usb_register_multiwrite, 667 .regbusy_read = rt2x00usb_regbusy_read, 668 .read_eeprom = rt2800usb_read_eeprom, 669 .hwcrypt_disabled = rt2800usb_hwcrypt_disabled, 670 .drv_write_firmware = rt2800usb_write_firmware, 671 .drv_init_registers = rt2800usb_init_registers, 672 .drv_get_txwi = rt2800usb_get_txwi, 673 .drv_get_dma_done = rt2800usb_get_dma_done, 674}; 675 676static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { 677 .probe_hw = rt2800usb_probe_hw, 678 .get_firmware_name = rt2800usb_get_firmware_name, 679 .check_firmware = rt2800_check_firmware, 680 .load_firmware = rt2800_load_firmware, 681 .initialize = rt2x00usb_initialize, 682 .uninitialize = rt2x00usb_uninitialize, 683 .clear_entry = rt2x00usb_clear_entry, 684 .set_device_state = rt2800usb_set_device_state, 685 .rfkill_poll = rt2800_rfkill_poll, 686 .link_stats = rt2800_link_stats, 687 .reset_tuner = rt2800_reset_tuner, 688 .link_tuner = rt2800_link_tuner, 689 .gain_calibration = rt2800_gain_calibration, 690 .vco_calibration = rt2800_vco_calibration, 691 .watchdog = rt2800_watchdog, 692 .start_queue = rt2800usb_start_queue, 693 .kick_queue = rt2x00usb_kick_queue, 694 .stop_queue = rt2800usb_stop_queue, 695 .flush_queue = rt2x00usb_flush_queue, 696 .tx_dma_done = rt2800usb_tx_dma_done, 697 .write_tx_desc = rt2800usb_write_tx_desc, 698 .write_tx_data = rt2800_write_tx_data, 699 .write_beacon = rt2800_write_beacon, 700 .clear_beacon = rt2800_clear_beacon, 701 .get_tx_data_len = rt2800usb_get_tx_data_len, 702 .fill_rxdone = rt2800usb_fill_rxdone, 703 .config_shared_key = rt2800_config_shared_key, 704 .config_pairwise_key = rt2800_config_pairwise_key, 705 .config_filter = rt2800_config_filter, 706 .config_intf = rt2800_config_intf, 707 .config_erp = rt2800_config_erp, 708 .config_ant = rt2800_config_ant, 709 .config = rt2800_config, 710 .pre_reset_hw = rt2800_pre_reset_hw, 711}; 712 713static void rt2800usb_queue_init(struct data_queue *queue) 714{ 715 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; 716 unsigned short txwi_size, rxwi_size; 717 718 rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size); 719 720 switch (queue->qid) { 721 case QID_RX: 722 queue->limit = 128; 723 queue->data_size = AGGREGATION_SIZE; 724 queue->desc_size = RXINFO_DESC_SIZE; 725 queue->winfo_size = rxwi_size; 726 queue->priv_size = sizeof(struct queue_entry_priv_usb); 727 break; 728 729 case QID_AC_VO: 730 case QID_AC_VI: 731 case QID_AC_BE: 732 case QID_AC_BK: 733 queue->limit = 16; 734 queue->data_size = AGGREGATION_SIZE; 735 queue->desc_size = TXINFO_DESC_SIZE; 736 queue->winfo_size = txwi_size; 737 queue->priv_size = sizeof(struct queue_entry_priv_usb); 738 break; 739 740 case QID_BEACON: 741 queue->limit = 8; 742 queue->data_size = MGMT_FRAME_SIZE; 743 queue->desc_size = TXINFO_DESC_SIZE; 744 queue->winfo_size = txwi_size; 745 queue->priv_size = sizeof(struct queue_entry_priv_usb); 746 break; 747 748 case QID_ATIM: 749 default: 750 BUG(); 751 break; 752 } 753} 754 755static const struct rt2x00_ops rt2800usb_ops = { 756 .name = KBUILD_MODNAME, 757 .drv_data_size = sizeof(struct rt2800_drv_data), 758 .max_ap_intf = 8, 759 .eeprom_size = EEPROM_SIZE, 760 .rf_size = RF_SIZE, 761 .tx_queues = NUM_TX_QUEUES, 762 .queue_init = rt2800usb_queue_init, 763 .lib = &rt2800usb_rt2x00_ops, 764 .drv = &rt2800usb_rt2800_ops, 765 .hw = &rt2800usb_mac80211_ops, 766#ifdef CONFIG_RT2X00_LIB_DEBUGFS 767 .debugfs = &rt2800_rt2x00debug, 768#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ 769}; 770 771/* 772 * rt2800usb module information. 773 */ 774static const struct usb_device_id rt2800usb_device_table[] = { 775 /* Abocom */ 776 { USB_DEVICE(0x07b8, 0x2870) }, 777 { USB_DEVICE(0x07b8, 0x2770) }, 778 { USB_DEVICE(0x07b8, 0x3070) }, 779 { USB_DEVICE(0x07b8, 0x3071) }, 780 { USB_DEVICE(0x07b8, 0x3072) }, 781 { USB_DEVICE(0x1482, 0x3c09) }, 782 /* AirTies */ 783 { USB_DEVICE(0x1eda, 0x2012) }, 784 { USB_DEVICE(0x1eda, 0x2210) }, 785 { USB_DEVICE(0x1eda, 0x2310) }, 786 /* Allwin */ 787 { USB_DEVICE(0x8516, 0x2070) }, 788 { USB_DEVICE(0x8516, 0x2770) }, 789 { USB_DEVICE(0x8516, 0x2870) }, 790 { USB_DEVICE(0x8516, 0x3070) }, 791 { USB_DEVICE(0x8516, 0x3071) }, 792 { USB_DEVICE(0x8516, 0x3072) }, 793 /* Alpha Networks */ 794 { USB_DEVICE(0x14b2, 0x3c06) }, 795 { USB_DEVICE(0x14b2, 0x3c07) }, 796 { USB_DEVICE(0x14b2, 0x3c09) }, 797 { USB_DEVICE(0x14b2, 0x3c12) }, 798 { USB_DEVICE(0x14b2, 0x3c23) }, 799 { USB_DEVICE(0x14b2, 0x3c25) }, 800 { USB_DEVICE(0x14b2, 0x3c27) }, 801 { USB_DEVICE(0x14b2, 0x3c28) }, 802 { USB_DEVICE(0x14b2, 0x3c2c) }, 803 /* Amit */ 804 { USB_DEVICE(0x15c5, 0x0008) }, 805 /* Askey */ 806 { USB_DEVICE(0x1690, 0x0740) }, 807 /* ASUS */ 808 { USB_DEVICE(0x0b05, 0x1731) }, 809 { USB_DEVICE(0x0b05, 0x1732) }, 810 { USB_DEVICE(0x0b05, 0x1742) }, 811 { USB_DEVICE(0x0b05, 0x1784) }, 812 { USB_DEVICE(0x1761, 0x0b05) }, 813 /* AzureWave */ 814 { USB_DEVICE(0x13d3, 0x3247) }, 815 { USB_DEVICE(0x13d3, 0x3273) }, 816 { USB_DEVICE(0x13d3, 0x3305) }, 817 { USB_DEVICE(0x13d3, 0x3307) }, 818 { USB_DEVICE(0x13d3, 0x3321) }, 819 /* Belkin */ 820 { USB_DEVICE(0x050d, 0x8053) }, 821 { USB_DEVICE(0x050d, 0x805c) }, 822 { USB_DEVICE(0x050d, 0x815c) }, 823 { USB_DEVICE(0x050d, 0x825a) }, 824 { USB_DEVICE(0x050d, 0x825b) }, 825 { USB_DEVICE(0x050d, 0x935a) }, 826 { USB_DEVICE(0x050d, 0x935b) }, 827 /* Buffalo */ 828 { USB_DEVICE(0x0411, 0x00e8) }, 829 { USB_DEVICE(0x0411, 0x0158) }, 830 { USB_DEVICE(0x0411, 0x015d) }, 831 { USB_DEVICE(0x0411, 0x016f) }, 832 { USB_DEVICE(0x0411, 0x01a2) }, 833 { USB_DEVICE(0x0411, 0x01ee) }, 834 { USB_DEVICE(0x0411, 0x01a8) }, 835 { USB_DEVICE(0x0411, 0x01fd) }, 836 /* Corega */ 837 { USB_DEVICE(0x07aa, 0x002f) }, 838 { USB_DEVICE(0x07aa, 0x003c) }, 839 { USB_DEVICE(0x07aa, 0x003f) }, 840 { USB_DEVICE(0x18c5, 0x0012) }, 841 /* D-Link */ 842 { USB_DEVICE(0x07d1, 0x3c09) }, 843 { USB_DEVICE(0x07d1, 0x3c0a) }, 844 { USB_DEVICE(0x07d1, 0x3c0d) }, 845 { USB_DEVICE(0x07d1, 0x3c0e) }, 846 { USB_DEVICE(0x07d1, 0x3c0f) }, 847 { USB_DEVICE(0x07d1, 0x3c11) }, 848 { USB_DEVICE(0x07d1, 0x3c13) }, 849 { USB_DEVICE(0x07d1, 0x3c15) }, 850 { USB_DEVICE(0x07d1, 0x3c16) }, 851 { USB_DEVICE(0x07d1, 0x3c17) }, 852 { USB_DEVICE(0x2001, 0x3317) }, 853 { USB_DEVICE(0x2001, 0x3c1b) }, 854 { USB_DEVICE(0x2001, 0x3c25) }, 855 /* Draytek */ 856 { USB_DEVICE(0x07fa, 0x7712) }, 857 /* DVICO */ 858 { USB_DEVICE(0x0fe9, 0xb307) }, 859 /* Edimax */ 860 { USB_DEVICE(0x7392, 0x4085) }, 861 { USB_DEVICE(0x7392, 0x7711) }, 862 { USB_DEVICE(0x7392, 0x7717) }, 863 { USB_DEVICE(0x7392, 0x7718) }, 864 { USB_DEVICE(0x7392, 0x7722) }, 865 /* Encore */ 866 { USB_DEVICE(0x203d, 0x1480) }, 867 { USB_DEVICE(0x203d, 0x14a9) }, 868 /* EnGenius */ 869 { USB_DEVICE(0x1740, 0x9701) }, 870 { USB_DEVICE(0x1740, 0x9702) }, 871 { USB_DEVICE(0x1740, 0x9703) }, 872 { USB_DEVICE(0x1740, 0x9705) }, 873 { USB_DEVICE(0x1740, 0x9706) }, 874 { USB_DEVICE(0x1740, 0x9707) }, 875 { USB_DEVICE(0x1740, 0x9708) }, 876 { USB_DEVICE(0x1740, 0x9709) }, 877 /* Gemtek */ 878 { USB_DEVICE(0x15a9, 0x0012) }, 879 /* Gigabyte */ 880 { USB_DEVICE(0x1044, 0x800b) }, 881 { USB_DEVICE(0x1044, 0x800d) }, 882 /* Hawking */ 883 { USB_DEVICE(0x0e66, 0x0001) }, 884 { USB_DEVICE(0x0e66, 0x0003) }, 885 { USB_DEVICE(0x0e66, 0x0009) }, 886 { USB_DEVICE(0x0e66, 0x000b) }, 887 { USB_DEVICE(0x0e66, 0x0013) }, 888 { USB_DEVICE(0x0e66, 0x0017) }, 889 { USB_DEVICE(0x0e66, 0x0018) }, 890 /* I-O DATA */ 891 { USB_DEVICE(0x04bb, 0x0945) }, 892 { USB_DEVICE(0x04bb, 0x0947) }, 893 { USB_DEVICE(0x04bb, 0x0948) }, 894 /* Linksys */ 895 { USB_DEVICE(0x13b1, 0x0031) }, 896 { USB_DEVICE(0x1737, 0x0070) }, 897 { USB_DEVICE(0x1737, 0x0071) }, 898 { USB_DEVICE(0x1737, 0x0077) }, 899 { USB_DEVICE(0x1737, 0x0078) }, 900 /* Logitec */ 901 { USB_DEVICE(0x0789, 0x0162) }, 902 { USB_DEVICE(0x0789, 0x0163) }, 903 { USB_DEVICE(0x0789, 0x0164) }, 904 { USB_DEVICE(0x0789, 0x0166) }, 905 /* Motorola */ 906 { USB_DEVICE(0x100d, 0x9031) }, 907 /* MSI */ 908 { USB_DEVICE(0x0db0, 0x3820) }, 909 { USB_DEVICE(0x0db0, 0x3821) }, 910 { USB_DEVICE(0x0db0, 0x3822) }, 911 { USB_DEVICE(0x0db0, 0x3870) }, 912 { USB_DEVICE(0x0db0, 0x3871) }, 913 { USB_DEVICE(0x0db0, 0x6899) }, 914 { USB_DEVICE(0x0db0, 0x821a) }, 915 { USB_DEVICE(0x0db0, 0x822a) }, 916 { USB_DEVICE(0x0db0, 0x822b) }, 917 { USB_DEVICE(0x0db0, 0x822c) }, 918 { USB_DEVICE(0x0db0, 0x870a) }, 919 { USB_DEVICE(0x0db0, 0x871a) }, 920 { USB_DEVICE(0x0db0, 0x871b) }, 921 { USB_DEVICE(0x0db0, 0x871c) }, 922 { USB_DEVICE(0x0db0, 0x899a) }, 923 /* Ovislink */ 924 { USB_DEVICE(0x1b75, 0x3070) }, 925 { USB_DEVICE(0x1b75, 0x3071) }, 926 { USB_DEVICE(0x1b75, 0x3072) }, 927 { USB_DEVICE(0x1b75, 0xa200) }, 928 /* Para */ 929 { USB_DEVICE(0x20b8, 0x8888) }, 930 /* Pegatron */ 931 { USB_DEVICE(0x1d4d, 0x0002) }, 932 { USB_DEVICE(0x1d4d, 0x000c) }, 933 { USB_DEVICE(0x1d4d, 0x000e) }, 934 { USB_DEVICE(0x1d4d, 0x0011) }, 935 /* Philips */ 936 { USB_DEVICE(0x0471, 0x200f) }, 937 /* Planex */ 938 { USB_DEVICE(0x2019, 0x5201) }, 939 { USB_DEVICE(0x2019, 0xab25) }, 940 { USB_DEVICE(0x2019, 0xed06) }, 941 /* Quanta */ 942 { USB_DEVICE(0x1a32, 0x0304) }, 943 /* Ralink */ 944 { USB_DEVICE(0x148f, 0x2070) }, 945 { USB_DEVICE(0x148f, 0x2770) }, 946 { USB_DEVICE(0x148f, 0x2870) }, 947 { USB_DEVICE(0x148f, 0x3070) }, 948 { USB_DEVICE(0x148f, 0x3071) }, 949 { USB_DEVICE(0x148f, 0x3072) }, 950 /* Samsung */ 951 { USB_DEVICE(0x04e8, 0x2018) }, 952 /* Siemens */ 953 { USB_DEVICE(0x129b, 0x1828) }, 954 /* Sitecom */ 955 { USB_DEVICE(0x0df6, 0x0017) }, 956 { USB_DEVICE(0x0df6, 0x002b) }, 957 { USB_DEVICE(0x0df6, 0x002c) }, 958 { USB_DEVICE(0x0df6, 0x002d) }, 959 { USB_DEVICE(0x0df6, 0x0039) }, 960 { USB_DEVICE(0x0df6, 0x003b) }, 961 { USB_DEVICE(0x0df6, 0x003d) }, 962 { USB_DEVICE(0x0df6, 0x003e) }, 963 { USB_DEVICE(0x0df6, 0x003f) }, 964 { USB_DEVICE(0x0df6, 0x0040) }, 965 { USB_DEVICE(0x0df6, 0x0042) }, 966 { USB_DEVICE(0x0df6, 0x0047) }, 967 { USB_DEVICE(0x0df6, 0x0048) }, 968 { USB_DEVICE(0x0df6, 0x0051) }, 969 { USB_DEVICE(0x0df6, 0x005f) }, 970 { USB_DEVICE(0x0df6, 0x0060) }, 971 /* SMC */ 972 { USB_DEVICE(0x083a, 0x6618) }, 973 { USB_DEVICE(0x083a, 0x7511) }, 974 { USB_DEVICE(0x083a, 0x7512) }, 975 { USB_DEVICE(0x083a, 0x7522) }, 976 { USB_DEVICE(0x083a, 0x8522) }, 977 { USB_DEVICE(0x083a, 0xa618) }, 978 { USB_DEVICE(0x083a, 0xa701) }, 979 { USB_DEVICE(0x083a, 0xa702) }, 980 { USB_DEVICE(0x083a, 0xa703) }, 981 { USB_DEVICE(0x083a, 0xb522) }, 982 /* Sparklan */ 983 { USB_DEVICE(0x15a9, 0x0006) }, 984 /* Sweex */ 985 { USB_DEVICE(0x177f, 0x0153) }, 986 { USB_DEVICE(0x177f, 0x0164) }, 987 { USB_DEVICE(0x177f, 0x0302) }, 988 { USB_DEVICE(0x177f, 0x0313) }, 989 { USB_DEVICE(0x177f, 0x0323) }, 990 { USB_DEVICE(0x177f, 0x0324) }, 991 { USB_DEVICE(0x177f, 0x1163) }, 992 /* U-Media */ 993 { USB_DEVICE(0x157e, 0x300e) }, 994 { USB_DEVICE(0x157e, 0x3013) }, 995 /* ZCOM */ 996 { USB_DEVICE(0x0cde, 0x0022) }, 997 { USB_DEVICE(0x0cde, 0x0025) }, 998 /* Zinwell */ 999 { USB_DEVICE(0x5a57, 0x0280) }, 1000 { USB_DEVICE(0x5a57, 0x0282) }, 1001 { USB_DEVICE(0x5a57, 0x0283) }, 1002 { USB_DEVICE(0x5a57, 0x5257) }, 1003 /* Zyxel */ 1004 { USB_DEVICE(0x0586, 0x3416) }, 1005 { USB_DEVICE(0x0586, 0x3418) }, 1006 { USB_DEVICE(0x0586, 0x341a) }, 1007 { USB_DEVICE(0x0586, 0x341e) }, 1008 { USB_DEVICE(0x0586, 0x343e) }, 1009#ifdef CONFIG_RT2800USB_RT33XX 1010 /* Belkin */ 1011 { USB_DEVICE(0x050d, 0x945b) }, 1012 /* D-Link */ 1013 { USB_DEVICE(0x2001, 0x3c17) }, 1014 /* Panasonic */ 1015 { USB_DEVICE(0x083a, 0xb511) }, 1016 /* Accton/Arcadyan/Epson */ 1017 { USB_DEVICE(0x083a, 0xb512) }, 1018 /* Philips */ 1019 { USB_DEVICE(0x0471, 0x20dd) }, 1020 /* Ralink */ 1021 { USB_DEVICE(0x148f, 0x3370) }, 1022 { USB_DEVICE(0x148f, 0x8070) }, 1023 /* Sitecom */ 1024 { USB_DEVICE(0x0df6, 0x0050) }, 1025 /* Sweex */ 1026 { USB_DEVICE(0x177f, 0x0163) }, 1027 { USB_DEVICE(0x177f, 0x0165) }, 1028#endif 1029#ifdef CONFIG_RT2800USB_RT35XX 1030 /* Allwin */ 1031 { USB_DEVICE(0x8516, 0x3572) }, 1032 /* Askey */ 1033 { USB_DEVICE(0x1690, 0x0744) }, 1034 { USB_DEVICE(0x1690, 0x0761) }, 1035 { USB_DEVICE(0x1690, 0x0764) }, 1036 /* ASUS */ 1037 { USB_DEVICE(0x0b05, 0x179d) }, 1038 /* Cisco */ 1039 { USB_DEVICE(0x167b, 0x4001) }, 1040 /* EnGenius */ 1041 { USB_DEVICE(0x1740, 0x9801) }, 1042 /* I-O DATA */ 1043 { USB_DEVICE(0x04bb, 0x0944) }, 1044 /* Linksys */ 1045 { USB_DEVICE(0x13b1, 0x002f) }, 1046 { USB_DEVICE(0x1737, 0x0079) }, 1047 /* Logitec */ 1048 { USB_DEVICE(0x0789, 0x0170) }, 1049 /* Ralink */ 1050 { USB_DEVICE(0x148f, 0x3572) }, 1051 /* Sitecom */ 1052 { USB_DEVICE(0x0df6, 0x0041) }, 1053 { USB_DEVICE(0x0df6, 0x0062) }, 1054 { USB_DEVICE(0x0df6, 0x0065) }, 1055 { USB_DEVICE(0x0df6, 0x0066) }, 1056 { USB_DEVICE(0x0df6, 0x0068) }, 1057 /* Toshiba */ 1058 { USB_DEVICE(0x0930, 0x0a07) }, 1059 /* Zinwell */ 1060 { USB_DEVICE(0x5a57, 0x0284) }, 1061#endif 1062#ifdef CONFIG_RT2800USB_RT3573 1063 /* AirLive */ 1064 { USB_DEVICE(0x1b75, 0x7733) }, 1065 /* ASUS */ 1066 { USB_DEVICE(0x0b05, 0x17bc) }, 1067 { USB_DEVICE(0x0b05, 0x17ad) }, 1068 /* Belkin */ 1069 { USB_DEVICE(0x050d, 0x1103) }, 1070 /* Cameo */ 1071 { USB_DEVICE(0x148f, 0xf301) }, 1072 /* D-Link */ 1073 { USB_DEVICE(0x2001, 0x3c1f) }, 1074 /* Edimax */ 1075 { USB_DEVICE(0x7392, 0x7733) }, 1076 /* Hawking */ 1077 { USB_DEVICE(0x0e66, 0x0020) }, 1078 { USB_DEVICE(0x0e66, 0x0021) }, 1079 /* I-O DATA */ 1080 { USB_DEVICE(0x04bb, 0x094e) }, 1081 /* Linksys */ 1082 { USB_DEVICE(0x13b1, 0x003b) }, 1083 /* Logitec */ 1084 { USB_DEVICE(0x0789, 0x016b) }, 1085 /* NETGEAR */ 1086 { USB_DEVICE(0x0846, 0x9012) }, 1087 { USB_DEVICE(0x0846, 0x9013) }, 1088 { USB_DEVICE(0x0846, 0x9019) }, 1089 /* Planex */ 1090 { USB_DEVICE(0x2019, 0xed14) }, 1091 { USB_DEVICE(0x2019, 0xed19) }, 1092 /* Ralink */ 1093 { USB_DEVICE(0x148f, 0x3573) }, 1094 /* Sitecom */ 1095 { USB_DEVICE(0x0df6, 0x0067) }, 1096 { USB_DEVICE(0x0df6, 0x006a) }, 1097 { USB_DEVICE(0x0df6, 0x006e) }, 1098 /* ZyXEL */ 1099 { USB_DEVICE(0x0586, 0x3421) }, 1100#endif 1101#ifdef CONFIG_RT2800USB_RT53XX 1102 /* Arcadyan */ 1103 { USB_DEVICE(0x043e, 0x7a12) }, 1104 /* ASUS */ 1105 { USB_DEVICE(0x0b05, 0x17e8) }, 1106 /* Azurewave */ 1107 { USB_DEVICE(0x13d3, 0x3329) }, 1108 { USB_DEVICE(0x13d3, 0x3365) }, 1109 /* D-Link */ 1110 { USB_DEVICE(0x2001, 0x3c15) }, 1111 { USB_DEVICE(0x2001, 0x3c19) }, 1112 { USB_DEVICE(0x2001, 0x3c1c) }, 1113 { USB_DEVICE(0x2001, 0x3c1d) }, 1114 { USB_DEVICE(0x2001, 0x3c1e) }, 1115 { USB_DEVICE(0x2001, 0x3c20) }, 1116 { USB_DEVICE(0x2001, 0x3c22) }, 1117 { USB_DEVICE(0x2001, 0x3c23) }, 1118 /* LG innotek */ 1119 { USB_DEVICE(0x043e, 0x7a22) }, 1120 { USB_DEVICE(0x043e, 0x7a42) }, 1121 /* Panasonic */ 1122 { USB_DEVICE(0x04da, 0x1801) }, 1123 { USB_DEVICE(0x04da, 0x1800) }, 1124 { USB_DEVICE(0x04da, 0x23f6) }, 1125 /* Philips */ 1126 { USB_DEVICE(0x0471, 0x2104) }, 1127 { USB_DEVICE(0x0471, 0x2126) }, 1128 { USB_DEVICE(0x0471, 0x2180) }, 1129 { USB_DEVICE(0x0471, 0x2181) }, 1130 { USB_DEVICE(0x0471, 0x2182) }, 1131 /* Ralink */ 1132 { USB_DEVICE(0x148f, 0x5370) }, 1133 { USB_DEVICE(0x148f, 0x5372) }, 1134#endif 1135#ifdef CONFIG_RT2800USB_RT55XX 1136 /* Arcadyan */ 1137 { USB_DEVICE(0x043e, 0x7a32) }, 1138 /* AVM GmbH */ 1139 { USB_DEVICE(0x057c, 0x8501) }, 1140 /* Buffalo */ 1141 { USB_DEVICE(0x0411, 0x0241) }, 1142 { USB_DEVICE(0x0411, 0x0253) }, 1143 /* D-Link */ 1144 { USB_DEVICE(0x2001, 0x3c1a) }, 1145 { USB_DEVICE(0x2001, 0x3c21) }, 1146 /* Proware */ 1147 { USB_DEVICE(0x043e, 0x7a13) }, 1148 /* Ralink */ 1149 { USB_DEVICE(0x148f, 0x5572) }, 1150 /* TRENDnet */ 1151 { USB_DEVICE(0x20f4, 0x724a) }, 1152#endif 1153#ifdef CONFIG_RT2800USB_UNKNOWN 1154 /* 1155 * Unclear what kind of devices these are (they aren't supported by the 1156 * vendor linux driver). 1157 */ 1158 /* Abocom */ 1159 { USB_DEVICE(0x07b8, 0x3073) }, 1160 { USB_DEVICE(0x07b8, 0x3074) }, 1161 /* Alpha Networks */ 1162 { USB_DEVICE(0x14b2, 0x3c08) }, 1163 { USB_DEVICE(0x14b2, 0x3c11) }, 1164 /* Amigo */ 1165 { USB_DEVICE(0x0e0b, 0x9031) }, 1166 { USB_DEVICE(0x0e0b, 0x9041) }, 1167 /* ASUS */ 1168 { USB_DEVICE(0x0b05, 0x166a) }, 1169 { USB_DEVICE(0x0b05, 0x1760) }, 1170 { USB_DEVICE(0x0b05, 0x1761) }, 1171 { USB_DEVICE(0x0b05, 0x1790) }, 1172 { USB_DEVICE(0x0b05, 0x17a7) }, 1173 /* AzureWave */ 1174 { USB_DEVICE(0x13d3, 0x3262) }, 1175 { USB_DEVICE(0x13d3, 0x3284) }, 1176 { USB_DEVICE(0x13d3, 0x3322) }, 1177 { USB_DEVICE(0x13d3, 0x3340) }, 1178 { USB_DEVICE(0x13d3, 0x3399) }, 1179 { USB_DEVICE(0x13d3, 0x3400) }, 1180 { USB_DEVICE(0x13d3, 0x3401) }, 1181 /* Belkin */ 1182 { USB_DEVICE(0x050d, 0x1003) }, 1183 /* Buffalo */ 1184 { USB_DEVICE(0x0411, 0x012e) }, 1185 { USB_DEVICE(0x0411, 0x0148) }, 1186 { USB_DEVICE(0x0411, 0x0150) }, 1187 /* Corega */ 1188 { USB_DEVICE(0x07aa, 0x0041) }, 1189 { USB_DEVICE(0x07aa, 0x0042) }, 1190 { USB_DEVICE(0x18c5, 0x0008) }, 1191 /* D-Link */ 1192 { USB_DEVICE(0x07d1, 0x3c0b) }, 1193 /* Encore */ 1194 { USB_DEVICE(0x203d, 0x14a1) }, 1195 /* EnGenius */ 1196 { USB_DEVICE(0x1740, 0x0600) }, 1197 { USB_DEVICE(0x1740, 0x0602) }, 1198 /* Gemtek */ 1199 { USB_DEVICE(0x15a9, 0x0010) }, 1200 /* Gigabyte */ 1201 { USB_DEVICE(0x1044, 0x800c) }, 1202 /* Hercules */ 1203 { USB_DEVICE(0x06f8, 0xe036) }, 1204 /* Huawei */ 1205 { USB_DEVICE(0x148f, 0xf101) }, 1206 /* I-O DATA */ 1207 { USB_DEVICE(0x04bb, 0x094b) }, 1208 /* LevelOne */ 1209 { USB_DEVICE(0x1740, 0x0605) }, 1210 { USB_DEVICE(0x1740, 0x0615) }, 1211 /* Logitec */ 1212 { USB_DEVICE(0x0789, 0x0168) }, 1213 { USB_DEVICE(0x0789, 0x0169) }, 1214 /* Motorola */ 1215 { USB_DEVICE(0x100d, 0x9032) }, 1216 /* Pegatron */ 1217 { USB_DEVICE(0x05a6, 0x0101) }, 1218 { USB_DEVICE(0x1d4d, 0x0010) }, 1219 /* Planex */ 1220 { USB_DEVICE(0x2019, 0xab24) }, 1221 { USB_DEVICE(0x2019, 0xab29) }, 1222 /* Qcom */ 1223 { USB_DEVICE(0x18e8, 0x6259) }, 1224 /* RadioShack */ 1225 { USB_DEVICE(0x08b9, 0x1197) }, 1226 /* Sitecom */ 1227 { USB_DEVICE(0x0df6, 0x003c) }, 1228 { USB_DEVICE(0x0df6, 0x004a) }, 1229 { USB_DEVICE(0x0df6, 0x004d) }, 1230 { USB_DEVICE(0x0df6, 0x0053) }, 1231 { USB_DEVICE(0x0df6, 0x0069) }, 1232 { USB_DEVICE(0x0df6, 0x006f) }, 1233 { USB_DEVICE(0x0df6, 0x0078) }, 1234 /* SMC */ 1235 { USB_DEVICE(0x083a, 0xa512) }, 1236 { USB_DEVICE(0x083a, 0xc522) }, 1237 { USB_DEVICE(0x083a, 0xd522) }, 1238 { USB_DEVICE(0x083a, 0xf511) }, 1239 /* Sweex */ 1240 { USB_DEVICE(0x177f, 0x0254) }, 1241 /* TP-LINK */ 1242 { USB_DEVICE(0xf201, 0x5370) }, 1243#endif 1244 { 0, } 1245}; 1246 1247MODULE_AUTHOR(DRV_PROJECT); 1248MODULE_VERSION(DRV_VERSION); 1249MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver."); 1250MODULE_DEVICE_TABLE(usb, rt2800usb_device_table); 1251MODULE_FIRMWARE(FIRMWARE_RT2870); 1252MODULE_LICENSE("GPL"); 1253 1254static int rt2800usb_probe(struct usb_interface *usb_intf, 1255 const struct usb_device_id *id) 1256{ 1257 return rt2x00usb_probe(usb_intf, &rt2800usb_ops); 1258} 1259 1260static struct usb_driver rt2800usb_driver = { 1261 .name = KBUILD_MODNAME, 1262 .id_table = rt2800usb_device_table, 1263 .probe = rt2800usb_probe, 1264 .disconnect = rt2x00usb_disconnect, 1265 .suspend = rt2x00usb_suspend, 1266 .resume = rt2x00usb_resume, 1267 .reset_resume = rt2x00usb_resume, 1268 .disable_hub_initiated_lpm = 1, 1269}; 1270 1271module_usb_driver(rt2800usb_driver);