hw.c (67038B)
1// SPDX-License-Identifier: GPL-2.0 2/* Copyright(c) 2009-2012 Realtek Corporation.*/ 3 4#include "../wifi.h" 5#include "../efuse.h" 6#include "../base.h" 7#include "../regd.h" 8#include "../cam.h" 9#include "../ps.h" 10#include "../pci.h" 11#include "reg.h" 12#include "def.h" 13#include "phy.h" 14#include "dm.h" 15#include "fw.h" 16#include "led.h" 17#include "sw.h" 18#include "hw.h" 19 20u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct) 21{ 22 struct rtl_priv *rtlpriv = rtl_priv(hw); 23 u32 value; 24 25 rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC)); 26 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct); 27 udelay(10); 28 value = rtl_read_dword(rtlpriv, REG_DBI_RDATA); 29 return value; 30} 31 32void rtl92de_write_dword_dbi(struct ieee80211_hw *hw, 33 u16 offset, u32 value, u8 direct) 34{ 35 struct rtl_priv *rtlpriv = rtl_priv(hw); 36 37 rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000)); 38 rtl_write_dword(rtlpriv, REG_DBI_WDATA, value); 39 rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct); 40} 41 42static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw, 43 u8 set_bits, u8 clear_bits) 44{ 45 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 46 struct rtl_priv *rtlpriv = rtl_priv(hw); 47 48 rtlpci->reg_bcn_ctrl_val |= set_bits; 49 rtlpci->reg_bcn_ctrl_val &= ~clear_bits; 50 rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val); 51} 52 53static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw) 54{ 55 struct rtl_priv *rtlpriv = rtl_priv(hw); 56 u8 tmp1byte; 57 58 tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); 59 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6))); 60 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff); 61 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64); 62 tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); 63 tmp1byte &= ~(BIT(0)); 64 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); 65} 66 67static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw) 68{ 69 struct rtl_priv *rtlpriv = rtl_priv(hw); 70 u8 tmp1byte; 71 72 tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); 73 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6)); 74 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); 75 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); 76 tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); 77 tmp1byte |= BIT(0); 78 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); 79} 80 81static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw) 82{ 83 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1)); 84} 85 86static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw) 87{ 88 _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0); 89} 90 91void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) 92{ 93 struct rtl_priv *rtlpriv = rtl_priv(hw); 94 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 95 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 96 97 switch (variable) { 98 case HW_VAR_RCR: 99 *((u32 *) (val)) = rtlpci->receive_config; 100 break; 101 case HW_VAR_RF_STATE: 102 *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; 103 break; 104 case HW_VAR_FWLPS_RF_ON:{ 105 enum rf_pwrstate rfstate; 106 u32 val_rcr; 107 108 rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, 109 (u8 *)(&rfstate)); 110 if (rfstate == ERFOFF) { 111 *((bool *) (val)) = true; 112 } else { 113 val_rcr = rtl_read_dword(rtlpriv, REG_RCR); 114 val_rcr &= 0x00070000; 115 if (val_rcr) 116 *((bool *) (val)) = false; 117 else 118 *((bool *) (val)) = true; 119 } 120 break; 121 } 122 case HW_VAR_FW_PSMODE_STATUS: 123 *((bool *) (val)) = ppsc->fw_current_inpsmode; 124 break; 125 case HW_VAR_CORRECT_TSF:{ 126 u64 tsf; 127 u32 *ptsf_low = (u32 *)&tsf; 128 u32 *ptsf_high = ((u32 *)&tsf) + 1; 129 130 *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4)); 131 *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR); 132 *((u64 *) (val)) = tsf; 133 break; 134 } 135 case HW_VAR_INT_MIGRATION: 136 *((bool *)(val)) = rtlpriv->dm.interrupt_migration; 137 break; 138 case HW_VAR_INT_AC: 139 *((bool *)(val)) = rtlpriv->dm.disable_tx_int; 140 break; 141 case HAL_DEF_WOWLAN: 142 break; 143 default: 144 pr_err("switch case %#x not processed\n", variable); 145 break; 146 } 147} 148 149void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) 150{ 151 struct rtl_priv *rtlpriv = rtl_priv(hw); 152 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 153 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 154 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 155 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 156 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 157 u8 idx; 158 159 switch (variable) { 160 case HW_VAR_ETHER_ADDR: 161 for (idx = 0; idx < ETH_ALEN; idx++) { 162 rtl_write_byte(rtlpriv, (REG_MACID + idx), 163 val[idx]); 164 } 165 break; 166 case HW_VAR_BASIC_RATE: { 167 u16 rate_cfg = ((u16 *) val)[0]; 168 u8 rate_index = 0; 169 170 rate_cfg = rate_cfg & 0x15f; 171 if (mac->vendor == PEER_CISCO && 172 ((rate_cfg & 0x150) == 0)) 173 rate_cfg |= 0x01; 174 rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff); 175 rtl_write_byte(rtlpriv, REG_RRSR + 1, 176 (rate_cfg >> 8) & 0xff); 177 while (rate_cfg > 0x1) { 178 rate_cfg = (rate_cfg >> 1); 179 rate_index++; 180 } 181 if (rtlhal->fw_version > 0xe) 182 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 183 rate_index); 184 break; 185 } 186 case HW_VAR_BSSID: 187 for (idx = 0; idx < ETH_ALEN; idx++) { 188 rtl_write_byte(rtlpriv, (REG_BSSID + idx), 189 val[idx]); 190 } 191 break; 192 case HW_VAR_SIFS: 193 rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]); 194 rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]); 195 rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]); 196 rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]); 197 if (!mac->ht_enable) 198 rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, 199 0x0e0e); 200 else 201 rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, 202 *((u16 *) val)); 203 break; 204 case HW_VAR_SLOT_TIME: { 205 u8 e_aci; 206 207 rtl_dbg(rtlpriv, COMP_MLME, DBG_LOUD, 208 "HW_VAR_SLOT_TIME %x\n", val[0]); 209 rtl_write_byte(rtlpriv, REG_SLOT, val[0]); 210 for (e_aci = 0; e_aci < AC_MAX; e_aci++) 211 rtlpriv->cfg->ops->set_hw_reg(hw, 212 HW_VAR_AC_PARAM, 213 (&e_aci)); 214 break; 215 } 216 case HW_VAR_ACK_PREAMBLE: { 217 u8 reg_tmp; 218 u8 short_preamble = (bool) (*val); 219 220 reg_tmp = (mac->cur_40_prime_sc) << 5; 221 if (short_preamble) 222 reg_tmp |= 0x80; 223 rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp); 224 break; 225 } 226 case HW_VAR_AMPDU_MIN_SPACE: { 227 u8 min_spacing_to_set; 228 u8 sec_min_space; 229 230 min_spacing_to_set = *val; 231 if (min_spacing_to_set <= 7) { 232 sec_min_space = 0; 233 if (min_spacing_to_set < sec_min_space) 234 min_spacing_to_set = sec_min_space; 235 mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) | 236 min_spacing_to_set); 237 *val = min_spacing_to_set; 238 rtl_dbg(rtlpriv, COMP_MLME, DBG_LOUD, 239 "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", 240 mac->min_space_cfg); 241 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 242 mac->min_space_cfg); 243 } 244 break; 245 } 246 case HW_VAR_SHORTGI_DENSITY: { 247 u8 density_to_set; 248 249 density_to_set = *val; 250 mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg; 251 mac->min_space_cfg |= (density_to_set << 3); 252 rtl_dbg(rtlpriv, COMP_MLME, DBG_LOUD, 253 "Set HW_VAR_SHORTGI_DENSITY: %#x\n", 254 mac->min_space_cfg); 255 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 256 mac->min_space_cfg); 257 break; 258 } 259 case HW_VAR_AMPDU_FACTOR: { 260 u8 factor_toset; 261 u32 regtoset; 262 u8 *ptmp_byte = NULL; 263 u8 index; 264 265 if (rtlhal->macphymode == DUALMAC_DUALPHY) 266 regtoset = 0xb9726641; 267 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) 268 regtoset = 0x66626641; 269 else 270 regtoset = 0xb972a841; 271 factor_toset = *val; 272 if (factor_toset <= 3) { 273 factor_toset = (1 << (factor_toset + 2)); 274 if (factor_toset > 0xf) 275 factor_toset = 0xf; 276 for (index = 0; index < 4; index++) { 277 ptmp_byte = (u8 *)(®toset) + index; 278 if ((*ptmp_byte & 0xf0) > 279 (factor_toset << 4)) 280 *ptmp_byte = (*ptmp_byte & 0x0f) 281 | (factor_toset << 4); 282 if ((*ptmp_byte & 0x0f) > factor_toset) 283 *ptmp_byte = (*ptmp_byte & 0xf0) 284 | (factor_toset); 285 } 286 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoset); 287 rtl_dbg(rtlpriv, COMP_MLME, DBG_LOUD, 288 "Set HW_VAR_AMPDU_FACTOR: %#x\n", 289 factor_toset); 290 } 291 break; 292 } 293 case HW_VAR_AC_PARAM: { 294 u8 e_aci = *val; 295 rtl92d_dm_init_edca_turbo(hw); 296 if (rtlpci->acm_method != EACMWAY2_SW) 297 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, 298 &e_aci); 299 break; 300 } 301 case HW_VAR_ACM_CTRL: { 302 u8 e_aci = *val; 303 union aci_aifsn *p_aci_aifsn = 304 (union aci_aifsn *)(&(mac->ac[0].aifs)); 305 u8 acm = p_aci_aifsn->f.acm; 306 u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL); 307 308 acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1); 309 if (acm) { 310 switch (e_aci) { 311 case AC0_BE: 312 acm_ctrl |= ACMHW_BEQEN; 313 break; 314 case AC2_VI: 315 acm_ctrl |= ACMHW_VIQEN; 316 break; 317 case AC3_VO: 318 acm_ctrl |= ACMHW_VOQEN; 319 break; 320 default: 321 rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, 322 "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", 323 acm); 324 break; 325 } 326 } else { 327 switch (e_aci) { 328 case AC0_BE: 329 acm_ctrl &= (~ACMHW_BEQEN); 330 break; 331 case AC2_VI: 332 acm_ctrl &= (~ACMHW_VIQEN); 333 break; 334 case AC3_VO: 335 acm_ctrl &= (~ACMHW_VOQEN); 336 break; 337 default: 338 pr_err("switch case %#x not processed\n", 339 e_aci); 340 break; 341 } 342 } 343 rtl_dbg(rtlpriv, COMP_QOS, DBG_TRACE, 344 "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", 345 acm_ctrl); 346 rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl); 347 break; 348 } 349 case HW_VAR_RCR: 350 rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]); 351 rtlpci->receive_config = ((u32 *) (val))[0]; 352 break; 353 case HW_VAR_RETRY_LIMIT: { 354 u8 retry_limit = val[0]; 355 356 rtl_write_word(rtlpriv, REG_RL, 357 retry_limit << RETRY_LIMIT_SHORT_SHIFT | 358 retry_limit << RETRY_LIMIT_LONG_SHIFT); 359 break; 360 } 361 case HW_VAR_DUAL_TSF_RST: 362 rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1))); 363 break; 364 case HW_VAR_EFUSE_BYTES: 365 rtlefuse->efuse_usedbytes = *((u16 *) val); 366 break; 367 case HW_VAR_EFUSE_USAGE: 368 rtlefuse->efuse_usedpercentage = *val; 369 break; 370 case HW_VAR_IO_CMD: 371 rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val)); 372 break; 373 case HW_VAR_WPA_CONFIG: 374 rtl_write_byte(rtlpriv, REG_SECCFG, *val); 375 break; 376 case HW_VAR_SET_RPWM: 377 rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (val)); 378 break; 379 case HW_VAR_H2C_FW_PWRMODE: 380 break; 381 case HW_VAR_FW_PSMODE_STATUS: 382 ppsc->fw_current_inpsmode = *((bool *) val); 383 break; 384 case HW_VAR_H2C_FW_JOINBSSRPT: { 385 u8 mstatus = (*val); 386 u8 tmp_regcr, tmp_reg422; 387 bool recover = false; 388 389 if (mstatus == RT_MEDIA_CONNECT) { 390 rtlpriv->cfg->ops->set_hw_reg(hw, 391 HW_VAR_AID, NULL); 392 tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1); 393 rtl_write_byte(rtlpriv, REG_CR + 1, 394 (tmp_regcr | BIT(0))); 395 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); 396 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); 397 tmp_reg422 = rtl_read_byte(rtlpriv, 398 REG_FWHW_TXQ_CTRL + 2); 399 if (tmp_reg422 & BIT(6)) 400 recover = true; 401 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, 402 tmp_reg422 & (~BIT(6))); 403 rtl92d_set_fw_rsvdpagepkt(hw, 0); 404 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); 405 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); 406 if (recover) 407 rtl_write_byte(rtlpriv, 408 REG_FWHW_TXQ_CTRL + 2, 409 tmp_reg422); 410 rtl_write_byte(rtlpriv, REG_CR + 1, 411 (tmp_regcr & ~(BIT(0)))); 412 } 413 rtl92d_set_fw_joinbss_report_cmd(hw, (*val)); 414 break; 415 } 416 case HW_VAR_AID: { 417 u16 u2btmp; 418 u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT); 419 u2btmp &= 0xC000; 420 rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp | 421 mac->assoc_id)); 422 break; 423 } 424 case HW_VAR_CORRECT_TSF: { 425 u8 btype_ibss = val[0]; 426 427 if (btype_ibss) 428 _rtl92de_stop_tx_beacon(hw); 429 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); 430 rtl_write_dword(rtlpriv, REG_TSFTR, 431 (u32) (mac->tsf & 0xffffffff)); 432 rtl_write_dword(rtlpriv, REG_TSFTR + 4, 433 (u32) ((mac->tsf >> 32) & 0xffffffff)); 434 _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); 435 if (btype_ibss) 436 _rtl92de_resume_tx_beacon(hw); 437 438 break; 439 } 440 case HW_VAR_INT_MIGRATION: { 441 bool int_migration = *(bool *) (val); 442 443 if (int_migration) { 444 /* Set interrupt migration timer and 445 * corresponding Tx/Rx counter. 446 * timer 25ns*0xfa0=100us for 0xf packets. 447 * 0x306:Rx, 0x307:Tx */ 448 rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); 449 rtlpriv->dm.interrupt_migration = int_migration; 450 } else { 451 /* Reset all interrupt migration settings. */ 452 rtl_write_dword(rtlpriv, REG_INT_MIG, 0); 453 rtlpriv->dm.interrupt_migration = int_migration; 454 } 455 break; 456 } 457 case HW_VAR_INT_AC: { 458 bool disable_ac_int = *((bool *) val); 459 460 /* Disable four ACs interrupts. */ 461 if (disable_ac_int) { 462 /* Disable VO, VI, BE and BK four AC interrupts 463 * to gain more efficient CPU utilization. 464 * When extremely highly Rx OK occurs, 465 * we will disable Tx interrupts. 466 */ 467 rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, 468 RT_AC_INT_MASKS); 469 rtlpriv->dm.disable_tx_int = disable_ac_int; 470 /* Enable four ACs interrupts. */ 471 } else { 472 rtlpriv->cfg->ops->update_interrupt_mask(hw, 473 RT_AC_INT_MASKS, 0); 474 rtlpriv->dm.disable_tx_int = disable_ac_int; 475 } 476 break; 477 } 478 default: 479 pr_err("switch case %#x not processed\n", variable); 480 break; 481 } 482} 483 484static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data) 485{ 486 struct rtl_priv *rtlpriv = rtl_priv(hw); 487 bool status = true; 488 long count = 0; 489 u32 value = _LLT_INIT_ADDR(address) | 490 _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); 491 492 rtl_write_dword(rtlpriv, REG_LLT_INIT, value); 493 do { 494 value = rtl_read_dword(rtlpriv, REG_LLT_INIT); 495 if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) 496 break; 497 if (count > POLLING_LLT_THRESHOLD) { 498 pr_err("Failed to polling write LLT done at address %d!\n", 499 address); 500 status = false; 501 break; 502 } 503 } while (++count); 504 return status; 505} 506 507static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw) 508{ 509 struct rtl_priv *rtlpriv = rtl_priv(hw); 510 unsigned short i; 511 u8 txpktbuf_bndy; 512 u8 maxpage; 513 bool status; 514 u32 value32; /* High+low page number */ 515 u8 value8; /* normal page number */ 516 517 if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { 518 maxpage = 255; 519 txpktbuf_bndy = 246; 520 value8 = 0; 521 value32 = 0x80bf0d29; 522 } else { 523 maxpage = 127; 524 txpktbuf_bndy = 123; 525 value8 = 0; 526 value32 = 0x80750005; 527 } 528 529 /* Set reserved page for each queue */ 530 /* 11. RQPN 0x200[31:0] = 0x80BD1C1C */ 531 /* load RQPN */ 532 rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); 533 rtl_write_dword(rtlpriv, REG_RQPN, value32); 534 535 /* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */ 536 /* TXRKTBUG_PG_BNDY */ 537 rtl_write_dword(rtlpriv, REG_TRXFF_BNDY, 538 (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 | 539 txpktbuf_bndy)); 540 541 /* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */ 542 /* Beacon Head for TXDMA */ 543 rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy); 544 545 /* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */ 546 /* BCNQ_PGBNDY */ 547 rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); 548 rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); 549 550 /* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */ 551 /* WMAC_LBK_BF_HD */ 552 rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy); 553 554 /* Set Tx/Rx page size (Tx must be 128 Bytes, */ 555 /* Rx can be 64,128,256,512,1024 bytes) */ 556 /* 16. PBP [7:0] = 0x11 */ 557 /* TRX page size */ 558 rtl_write_byte(rtlpriv, REG_PBP, 0x11); 559 560 /* 17. DRV_INFO_SZ = 0x04 */ 561 rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4); 562 563 /* 18. LLT_table_init(Adapter); */ 564 for (i = 0; i < (txpktbuf_bndy - 1); i++) { 565 status = _rtl92de_llt_write(hw, i, i + 1); 566 if (!status) 567 return status; 568 } 569 570 /* end of list */ 571 status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF); 572 if (!status) 573 return status; 574 575 /* Make the other pages as ring buffer */ 576 /* This ring buffer is used as beacon buffer if we */ 577 /* config this MAC as two MAC transfer. */ 578 /* Otherwise used as local loopback buffer. */ 579 for (i = txpktbuf_bndy; i < maxpage; i++) { 580 status = _rtl92de_llt_write(hw, i, (i + 1)); 581 if (!status) 582 return status; 583 } 584 585 /* Let last entry point to the start entry of ring buffer */ 586 status = _rtl92de_llt_write(hw, maxpage, txpktbuf_bndy); 587 if (!status) 588 return status; 589 590 return true; 591} 592 593static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw) 594{ 595 struct rtl_priv *rtlpriv = rtl_priv(hw); 596 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 597 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 598 struct rtl_led *pled0 = &rtlpriv->ledctl.sw_led0; 599 600 if (rtlpci->up_first_time) 601 return; 602 if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) 603 rtl92de_sw_led_on(hw, pled0); 604 else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT) 605 rtl92de_sw_led_on(hw, pled0); 606 else 607 rtl92de_sw_led_off(hw, pled0); 608} 609 610static bool _rtl92de_init_mac(struct ieee80211_hw *hw) 611{ 612 struct rtl_priv *rtlpriv = rtl_priv(hw); 613 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 614 unsigned char bytetmp; 615 unsigned short wordtmp; 616 u16 retry; 617 618 rtl92d_phy_set_poweron(hw); 619 /* Add for resume sequence of power domain according 620 * to power document V11. Chapter V.11.... */ 621 /* 0. RSV_CTRL 0x1C[7:0] = 0x00 */ 622 /* unlock ISO/CLK/Power control register */ 623 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00); 624 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05); 625 626 /* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */ 627 /* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */ 628 /* 3. delay (1ms) this is not necessary when initially power on */ 629 630 /* C. Resume Sequence */ 631 /* a. SPS0_CTRL 0x11[7:0] = 0x2b */ 632 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b); 633 634 /* b. AFE_XTAL_CTRL [7:0] = 0x0F */ 635 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F); 636 637 /* c. DRV runs power on init flow */ 638 639 /* auto enable WLAN */ 640 /* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */ 641 /* Power On Reset for MAC Block */ 642 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0); 643 udelay(2); 644 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp); 645 udelay(2); 646 647 /* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */ 648 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); 649 udelay(50); 650 retry = 0; 651 while ((bytetmp & BIT(0)) && retry < 1000) { 652 retry++; 653 bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); 654 udelay(50); 655 } 656 657 /* Enable Radio off, GPIO, and LED function */ 658 /* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */ 659 rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012); 660 661 /* release RF digital isolation */ 662 /* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */ 663 /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */ 664 rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82); 665 udelay(2); 666 667 /* make sure that BB reset OK. */ 668 /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */ 669 670 /* Disable REG_CR before enable it to assure reset */ 671 rtl_write_word(rtlpriv, REG_CR, 0x0); 672 673 /* Release MAC IO register reset */ 674 rtl_write_word(rtlpriv, REG_CR, 0x2ff); 675 676 /* clear stopping tx/rx dma */ 677 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0); 678 679 /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */ 680 681 /* System init */ 682 /* 18. LLT_table_init(Adapter); */ 683 if (!_rtl92de_llt_table_init(hw)) 684 return false; 685 686 /* Clear interrupt and enable interrupt */ 687 /* 19. HISR 0x124[31:0] = 0xffffffff; */ 688 /* HISRE 0x12C[7:0] = 0xFF */ 689 rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff); 690 rtl_write_byte(rtlpriv, REG_HISRE, 0xff); 691 692 /* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */ 693 /* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */ 694 /* The IMR should be enabled later after all init sequence 695 * is finished. */ 696 697 /* 22. PCIE configuration space configuration */ 698 /* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */ 699 /* and PCIe gated clock function is enabled. */ 700 /* PCIE configuration space will be written after 701 * all init sequence.(Or by BIOS) */ 702 703 rtl92d_phy_config_maccoexist_rfpage(hw); 704 705 /* THe below section is not related to power document Vxx . */ 706 /* This is only useful for driver and OS setting. */ 707 /* -------------------Software Relative Setting---------------------- */ 708 wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL); 709 wordtmp &= 0xf; 710 wordtmp |= 0xF771; 711 rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp); 712 713 /* Reported Tx status from HW for rate adaptive. */ 714 /* This should be realtive to power on step 14. But in document V11 */ 715 /* still not contain the description.!!! */ 716 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F); 717 718 /* Set Tx/Rx page size (Tx must be 128 Bytes, 719 * Rx can be 64,128,256,512,1024 bytes) */ 720 /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */ 721 722 /* Set RCR register */ 723 rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config); 724 /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */ 725 726 /* Set TCR register */ 727 rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config); 728 729 /* disable earlymode */ 730 rtl_write_byte(rtlpriv, 0x4d0, 0x0); 731 732 /* Set TX/RX descriptor physical address(from OS API). */ 733 rtl_write_dword(rtlpriv, REG_BCNQ_DESA, 734 rtlpci->tx_ring[BEACON_QUEUE].dma); 735 rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma); 736 rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma); 737 rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma); 738 rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma); 739 rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma); 740 rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma); 741 /* Set RX Desc Address */ 742 rtl_write_dword(rtlpriv, REG_RX_DESA, 743 rtlpci->rx_ring[RX_MPDU_QUEUE].dma); 744 745 /* if we want to support 64 bit DMA, we should set it here, 746 * but now we do not support 64 bit DMA*/ 747 748 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33); 749 750 /* Reset interrupt migration setting when initialization */ 751 rtl_write_dword(rtlpriv, REG_INT_MIG, 0); 752 753 /* Reconsider when to do this operation after asking HWSD. */ 754 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); 755 rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6)); 756 do { 757 retry++; 758 bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); 759 } while ((retry < 200) && !(bytetmp & BIT(7))); 760 761 /* After MACIO reset,we must refresh LED state. */ 762 _rtl92de_gen_refresh_led_state(hw); 763 764 /* Reset H2C protection register */ 765 rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0); 766 767 return true; 768} 769 770static void _rtl92de_hw_configure(struct ieee80211_hw *hw) 771{ 772 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 773 struct rtl_priv *rtlpriv = rtl_priv(hw); 774 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 775 u8 reg_bw_opmode = BW_OPMODE_20MHZ; 776 u32 reg_rrsr; 777 778 reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; 779 rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8); 780 rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode); 781 rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr); 782 rtl_write_byte(rtlpriv, REG_SLOT, 0x09); 783 rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0); 784 rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80); 785 rtl_write_word(rtlpriv, REG_RL, 0x0707); 786 rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802); 787 rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF); 788 rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000); 789 rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504); 790 rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000); 791 rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504); 792 /* Aggregation threshold */ 793 if (rtlhal->macphymode == DUALMAC_DUALPHY) 794 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641); 795 else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) 796 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641); 797 else 798 rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841); 799 rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2); 800 rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); 801 rtlpci->reg_bcn_ctrl_val = 0x1f; 802 rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val); 803 rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); 804 rtl_write_byte(rtlpriv, REG_PIFS, 0x1C); 805 rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16); 806 rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020); 807 /* For throughput */ 808 rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666); 809 /* ACKTO for IOT issue. */ 810 rtl_write_byte(rtlpriv, REG_ACKTO, 0x40); 811 /* Set Spec SIFS (used in NAV) */ 812 rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010); 813 rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010); 814 /* Set SIFS for CCK */ 815 rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010); 816 /* Set SIFS for OFDM */ 817 rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010); 818 /* Set Multicast Address. */ 819 rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff); 820 rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff); 821 switch (rtlpriv->phy.rf_type) { 822 case RF_1T2R: 823 case RF_1T1R: 824 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); 825 break; 826 case RF_2T2R: 827 case RF_2T2R_GREEN: 828 rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); 829 break; 830 } 831} 832 833static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw) 834{ 835 struct rtl_priv *rtlpriv = rtl_priv(hw); 836 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 837 838 rtl_write_byte(rtlpriv, 0x34b, 0x93); 839 rtl_write_word(rtlpriv, 0x350, 0x870c); 840 rtl_write_byte(rtlpriv, 0x352, 0x1); 841 if (ppsc->support_backdoor) 842 rtl_write_byte(rtlpriv, 0x349, 0x1b); 843 else 844 rtl_write_byte(rtlpriv, 0x349, 0x03); 845 rtl_write_word(rtlpriv, 0x350, 0x2718); 846 rtl_write_byte(rtlpriv, 0x352, 0x1); 847} 848 849void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw) 850{ 851 struct rtl_priv *rtlpriv = rtl_priv(hw); 852 u8 sec_reg_value; 853 854 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 855 "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n", 856 rtlpriv->sec.pairwise_enc_algorithm, 857 rtlpriv->sec.group_enc_algorithm); 858 if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { 859 rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, 860 "not open hw encryption\n"); 861 return; 862 } 863 sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE; 864 if (rtlpriv->sec.use_defaultkey) { 865 sec_reg_value |= SCR_TXUSEDK; 866 sec_reg_value |= SCR_RXUSEDK; 867 } 868 sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK); 869 rtl_write_byte(rtlpriv, REG_CR + 1, 0x02); 870 rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, 871 "The SECR-value %x\n", sec_reg_value); 872 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); 873} 874 875int rtl92de_hw_init(struct ieee80211_hw *hw) 876{ 877 struct rtl_priv *rtlpriv = rtl_priv(hw); 878 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 879 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 880 struct rtl_phy *rtlphy = &(rtlpriv->phy); 881 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 882 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 883 bool rtstatus = true; 884 u8 tmp_u1b; 885 int i; 886 int err; 887 unsigned long flags; 888 889 rtlpci->being_init_adapter = true; 890 rtlpci->init_ready = false; 891 spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); 892 /* we should do iqk after disable/enable */ 893 rtl92d_phy_reset_iqk_result(hw); 894 /* rtlpriv->intf_ops->disable_aspm(hw); */ 895 rtstatus = _rtl92de_init_mac(hw); 896 if (!rtstatus) { 897 pr_err("Init MAC failed\n"); 898 err = 1; 899 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 900 return err; 901 } 902 err = rtl92d_download_fw(hw); 903 spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); 904 if (err) { 905 rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, 906 "Failed to download FW. Init HW without FW..\n"); 907 return 1; 908 } 909 rtlhal->last_hmeboxnum = 0; 910 rtlpriv->psc.fw_current_inpsmode = false; 911 912 tmp_u1b = rtl_read_byte(rtlpriv, 0x605); 913 tmp_u1b = tmp_u1b | 0x30; 914 rtl_write_byte(rtlpriv, 0x605, tmp_u1b); 915 916 if (rtlhal->earlymode_enable) { 917 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 918 "EarlyMode Enabled!!!\n"); 919 920 tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0); 921 tmp_u1b = tmp_u1b | 0x1f; 922 rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b); 923 924 rtl_write_byte(rtlpriv, 0x4d3, 0x80); 925 926 tmp_u1b = rtl_read_byte(rtlpriv, 0x605); 927 tmp_u1b = tmp_u1b | 0x40; 928 rtl_write_byte(rtlpriv, 0x605, tmp_u1b); 929 } 930 931 if (mac->rdg_en) { 932 rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff); 933 rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200); 934 rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05); 935 } 936 937 rtl92d_phy_mac_config(hw); 938 /* because last function modify RCR, so we update 939 * rcr var here, or TP will unstable for receive_config 940 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx 941 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/ 942 rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR); 943 rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); 944 945 rtl92d_phy_bb_config(hw); 946 947 rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; 948 /* set before initialize RF */ 949 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); 950 951 /* config RF */ 952 rtl92d_phy_rf_config(hw); 953 954 /* After read predefined TXT, we must set BB/MAC/RF 955 * register as our requirement */ 956 /* After load BB,RF params,we need do more for 92D. */ 957 rtl92d_update_bbrf_configuration(hw); 958 /* set default value after initialize RF, */ 959 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0); 960 rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0, 961 RF_CHNLBW, RFREG_OFFSET_MASK); 962 rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1, 963 RF_CHNLBW, RFREG_OFFSET_MASK); 964 965 /*---- Set CCK and OFDM Block "ON"----*/ 966 if (rtlhal->current_bandtype == BAND_ON_2_4G) 967 rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); 968 rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); 969 if (rtlhal->interfaceindex == 0) { 970 /* RFPGA0_ANALOGPARAMETER2: cck clock select, 971 * set to 20MHz by default */ 972 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) | 973 BIT(11), 3); 974 } else { 975 /* Mac1 */ 976 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) | 977 BIT(10), 3); 978 } 979 980 _rtl92de_hw_configure(hw); 981 982 /* reset hw sec */ 983 rtl_cam_reset_all_entry(hw); 984 rtl92de_enable_hw_security_config(hw); 985 986 /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ 987 /* TX power index for different rate set. */ 988 rtl92d_phy_get_hw_reg_originalvalue(hw); 989 rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel); 990 991 ppsc->rfpwr_state = ERFON; 992 993 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); 994 995 _rtl92de_enable_aspm_back_door(hw); 996 /* rtlpriv->intf_ops->enable_aspm(hw); */ 997 998 rtl92d_dm_init(hw); 999 rtlpci->being_init_adapter = false; 1000 1001 if (ppsc->rfpwr_state == ERFON) { 1002 rtl92d_phy_lc_calibrate(hw); 1003 /* 5G and 2.4G must wait sometime to let RF LO ready */ 1004 if (rtlhal->macphymode == DUALMAC_DUALPHY) { 1005 u32 tmp_rega; 1006 for (i = 0; i < 10000; i++) { 1007 udelay(MAX_STALL_TIME); 1008 1009 tmp_rega = rtl_get_rfreg(hw, 1010 (enum radio_path)RF90_PATH_A, 1011 0x2a, MASKDWORD); 1012 1013 if (((tmp_rega & BIT(11)) == BIT(11))) 1014 break; 1015 } 1016 /* check that loop was successful. If not, exit now */ 1017 if (i == 10000) { 1018 rtlpci->init_ready = false; 1019 return 1; 1020 } 1021 } 1022 } 1023 rtlpci->init_ready = true; 1024 return err; 1025} 1026 1027static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw) 1028{ 1029 struct rtl_priv *rtlpriv = rtl_priv(hw); 1030 enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY; 1031 u32 value32; 1032 1033 value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG); 1034 if (!(value32 & 0x000f0000)) { 1035 version = VERSION_TEST_CHIP_92D_SINGLEPHY; 1036 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "TEST CHIP!!!\n"); 1037 } else { 1038 version = VERSION_NORMAL_CHIP_92D_SINGLEPHY; 1039 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "Normal CHIP!!!\n"); 1040 } 1041 return version; 1042} 1043 1044static int _rtl92de_set_media_status(struct ieee80211_hw *hw, 1045 enum nl80211_iftype type) 1046{ 1047 struct rtl_priv *rtlpriv = rtl_priv(hw); 1048 u8 bt_msr = rtl_read_byte(rtlpriv, MSR); 1049 enum led_ctl_mode ledaction = LED_CTL_NO_LINK; 1050 u8 bcnfunc_enable; 1051 1052 bt_msr &= 0xfc; 1053 1054 if (type == NL80211_IFTYPE_UNSPECIFIED || 1055 type == NL80211_IFTYPE_STATION) { 1056 _rtl92de_stop_tx_beacon(hw); 1057 _rtl92de_enable_bcn_sub_func(hw); 1058 } else if (type == NL80211_IFTYPE_ADHOC || 1059 type == NL80211_IFTYPE_AP) { 1060 _rtl92de_resume_tx_beacon(hw); 1061 _rtl92de_disable_bcn_sub_func(hw); 1062 } else { 1063 rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, 1064 "Set HW_VAR_MEDIA_STATUS: No such media status(%x)\n", 1065 type); 1066 } 1067 bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL); 1068 switch (type) { 1069 case NL80211_IFTYPE_UNSPECIFIED: 1070 bt_msr |= MSR_NOLINK; 1071 ledaction = LED_CTL_LINK; 1072 bcnfunc_enable &= 0xF7; 1073 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 1074 "Set Network type to NO LINK!\n"); 1075 break; 1076 case NL80211_IFTYPE_ADHOC: 1077 bt_msr |= MSR_ADHOC; 1078 bcnfunc_enable |= 0x08; 1079 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 1080 "Set Network type to Ad Hoc!\n"); 1081 break; 1082 case NL80211_IFTYPE_STATION: 1083 bt_msr |= MSR_INFRA; 1084 ledaction = LED_CTL_LINK; 1085 bcnfunc_enable &= 0xF7; 1086 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 1087 "Set Network type to STA!\n"); 1088 break; 1089 case NL80211_IFTYPE_AP: 1090 bt_msr |= MSR_AP; 1091 bcnfunc_enable |= 0x08; 1092 rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, 1093 "Set Network type to AP!\n"); 1094 break; 1095 default: 1096 pr_err("Network type %d not supported!\n", type); 1097 return 1; 1098 } 1099 rtl_write_byte(rtlpriv, MSR, bt_msr); 1100 rtlpriv->cfg->ops->led_control(hw, ledaction); 1101 if ((bt_msr & MSR_MASK) == MSR_AP) 1102 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00); 1103 else 1104 rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66); 1105 return 0; 1106} 1107 1108void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) 1109{ 1110 struct rtl_priv *rtlpriv = rtl_priv(hw); 1111 u32 reg_rcr; 1112 1113 if (rtlpriv->psc.rfpwr_state != ERFON) 1114 return; 1115 1116 rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 1117 1118 if (check_bssid) { 1119 reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); 1120 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 1121 _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); 1122 } else if (!check_bssid) { 1123 reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); 1124 _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); 1125 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); 1126 } 1127} 1128 1129int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) 1130{ 1131 struct rtl_priv *rtlpriv = rtl_priv(hw); 1132 1133 if (_rtl92de_set_media_status(hw, type)) 1134 return -EOPNOTSUPP; 1135 1136 /* check bssid */ 1137 if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { 1138 if (type != NL80211_IFTYPE_AP) 1139 rtl92de_set_check_bssid(hw, true); 1140 } else { 1141 rtl92de_set_check_bssid(hw, false); 1142 } 1143 return 0; 1144} 1145 1146/* do iqk or reload iqk */ 1147/* windows just rtl92d_phy_reload_iqk_setting in set channel, 1148 * but it's very strict for time sequence so we add 1149 * rtl92d_phy_reload_iqk_setting here */ 1150void rtl92d_linked_set_reg(struct ieee80211_hw *hw) 1151{ 1152 struct rtl_priv *rtlpriv = rtl_priv(hw); 1153 struct rtl_phy *rtlphy = &(rtlpriv->phy); 1154 u8 indexforchannel; 1155 u8 channel = rtlphy->current_channel; 1156 1157 indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel); 1158 if (!rtlphy->iqk_matrix[indexforchannel].iqk_done) { 1159 rtl_dbg(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG, 1160 "Do IQK for channel:%d\n", channel); 1161 rtl92d_phy_iq_calibrate(hw); 1162 } 1163} 1164 1165/* don't set REG_EDCA_BE_PARAM here because 1166 * mac80211 will send pkt when scan */ 1167void rtl92de_set_qos(struct ieee80211_hw *hw, int aci) 1168{ 1169 rtl92d_dm_init_edca_turbo(hw); 1170} 1171 1172void rtl92de_enable_interrupt(struct ieee80211_hw *hw) 1173{ 1174 struct rtl_priv *rtlpriv = rtl_priv(hw); 1175 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1176 1177 rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF); 1178 rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF); 1179 rtlpci->irq_enabled = true; 1180} 1181 1182void rtl92de_disable_interrupt(struct ieee80211_hw *hw) 1183{ 1184 struct rtl_priv *rtlpriv = rtl_priv(hw); 1185 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1186 1187 rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED); 1188 rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED); 1189 rtlpci->irq_enabled = false; 1190} 1191 1192static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw) 1193{ 1194 struct rtl_priv *rtlpriv = rtl_priv(hw); 1195 u8 u1b_tmp; 1196 unsigned long flags; 1197 1198 rtlpriv->intf_ops->enable_aspm(hw); 1199 rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00); 1200 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0); 1201 rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0); 1202 1203 /* 0x20:value 05-->04 */ 1204 rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04); 1205 1206 /* ==== Reset digital sequence ====== */ 1207 rtl92d_firmware_selfreset(hw); 1208 1209 /* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */ 1210 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51); 1211 1212 /* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */ 1213 rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00); 1214 1215 /* ==== Pull GPIO PIN to balance level and LED control ====== */ 1216 1217 /* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */ 1218 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000); 1219 1220 /* i. Value = GPIO_PIN_CTRL[7:0] */ 1221 u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL); 1222 1223 /* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */ 1224 /* write external PIN level */ 1225 rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 1226 0x00FF0000 | (u1b_tmp << 8)); 1227 1228 /* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */ 1229 rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790); 1230 1231 /* l. LEDCFG 0x4C[15:0] = 0x8080 */ 1232 rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080); 1233 1234 /* ==== Disable analog sequence === */ 1235 1236 /* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */ 1237 rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80); 1238 1239 /* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */ 1240 rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23); 1241 1242 /* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */ 1243 rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e); 1244 1245 /* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */ 1246 rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e); 1247 1248 /* ==== interface into suspend === */ 1249 1250 /* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */ 1251 /* According to power document V11, we need to set this */ 1252 /* value as 0x18. Otherwise, we may not L0s sometimes. */ 1253 /* This indluences power consumption. Bases on SD1's test, */ 1254 /* set as 0x00 do not affect power current. And if it */ 1255 /* is set as 0x18, they had ever met auto load fail problem. */ 1256 rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10); 1257 1258 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 1259 "In PowerOff,reg0x%x=%X\n", 1260 REG_SPS0_CTRL, rtl_read_byte(rtlpriv, REG_SPS0_CTRL)); 1261 /* r. Note: for PCIe interface, PON will not turn */ 1262 /* off m-bias and BandGap in PCIe suspend mode. */ 1263 1264 /* 0x17[7] 1b': power off in process 0b' : power off over */ 1265 if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { 1266 spin_lock_irqsave(&globalmutex_power, flags); 1267 u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS); 1268 u1b_tmp &= (~BIT(7)); 1269 rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp); 1270 spin_unlock_irqrestore(&globalmutex_power, flags); 1271 } 1272 1273 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "<=======\n"); 1274} 1275 1276void rtl92de_card_disable(struct ieee80211_hw *hw) 1277{ 1278 struct rtl_priv *rtlpriv = rtl_priv(hw); 1279 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 1280 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1281 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1282 enum nl80211_iftype opmode; 1283 1284 mac->link_state = MAC80211_NOLINK; 1285 opmode = NL80211_IFTYPE_UNSPECIFIED; 1286 _rtl92de_set_media_status(hw, opmode); 1287 1288 if (rtlpci->driver_is_goingto_unload || 1289 ppsc->rfoff_reason > RF_CHANGE_BY_PS) 1290 rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); 1291 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); 1292 /* Power sequence for each MAC. */ 1293 /* a. stop tx DMA */ 1294 /* b. close RF */ 1295 /* c. clear rx buf */ 1296 /* d. stop rx DMA */ 1297 /* e. reset MAC */ 1298 1299 /* a. stop tx DMA */ 1300 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE); 1301 udelay(50); 1302 1303 /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */ 1304 1305 /* c. ========RF OFF sequence========== */ 1306 /* 0x88c[23:20] = 0xf. */ 1307 rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); 1308 rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00); 1309 1310 /* APSD_CTRL 0x600[7:0] = 0x40 */ 1311 rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40); 1312 1313 /* Close antenna 0,0xc04,0xd04 */ 1314 rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0); 1315 rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0); 1316 1317 /* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */ 1318 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2); 1319 1320 /* Mac0 can not do Global reset. Mac1 can do. */ 1321 /* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */ 1322 if (rtlpriv->rtlhal.interfaceindex == 1) 1323 rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0); 1324 udelay(50); 1325 1326 /* d. stop tx/rx dma before disable REG_CR (0x100) to fix */ 1327 /* dma hang issue when disable/enable device. */ 1328 rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff); 1329 udelay(50); 1330 rtl_write_byte(rtlpriv, REG_CR, 0x0); 1331 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "==> Do power off.......\n"); 1332 if (rtl92d_phy_check_poweroff(hw)) 1333 _rtl92de_poweroff_adapter(hw); 1334 return; 1335} 1336 1337void rtl92de_interrupt_recognized(struct ieee80211_hw *hw, 1338 struct rtl_int *intvec) 1339{ 1340 struct rtl_priv *rtlpriv = rtl_priv(hw); 1341 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1342 1343 intvec->inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; 1344 rtl_write_dword(rtlpriv, ISR, intvec->inta); 1345} 1346 1347void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw) 1348{ 1349 struct rtl_priv *rtlpriv = rtl_priv(hw); 1350 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1351 u16 bcn_interval, atim_window; 1352 1353 bcn_interval = mac->beacon_interval; 1354 atim_window = 2; 1355 rtl92de_disable_interrupt(hw); 1356 rtl_write_word(rtlpriv, REG_ATIMWND, atim_window); 1357 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); 1358 rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f); 1359 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20); 1360 if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G) 1361 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30); 1362 else 1363 rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20); 1364 rtl_write_byte(rtlpriv, 0x606, 0x30); 1365} 1366 1367void rtl92de_set_beacon_interval(struct ieee80211_hw *hw) 1368{ 1369 struct rtl_priv *rtlpriv = rtl_priv(hw); 1370 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1371 u16 bcn_interval = mac->beacon_interval; 1372 1373 rtl_dbg(rtlpriv, COMP_BEACON, DBG_DMESG, 1374 "beacon_interval:%d\n", bcn_interval); 1375 rtl92de_disable_interrupt(hw); 1376 rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); 1377 rtl92de_enable_interrupt(hw); 1378} 1379 1380void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw, 1381 u32 add_msr, u32 rm_msr) 1382{ 1383 struct rtl_priv *rtlpriv = rtl_priv(hw); 1384 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 1385 1386 rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n", 1387 add_msr, rm_msr); 1388 if (add_msr) 1389 rtlpci->irq_mask[0] |= add_msr; 1390 if (rm_msr) 1391 rtlpci->irq_mask[0] &= (~rm_msr); 1392 rtl92de_disable_interrupt(hw); 1393 rtl92de_enable_interrupt(hw); 1394} 1395 1396static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo, 1397 u8 *rom_content, bool autoloadfail) 1398{ 1399 u32 rfpath, eeaddr, group, offset1, offset2; 1400 u8 i; 1401 1402 memset(pwrinfo, 0, sizeof(struct txpower_info)); 1403 if (autoloadfail) { 1404 for (group = 0; group < CHANNEL_GROUP_MAX; group++) { 1405 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1406 if (group < CHANNEL_GROUP_MAX_2G) { 1407 pwrinfo->cck_index[rfpath][group] = 1408 EEPROM_DEFAULT_TXPOWERLEVEL_2G; 1409 pwrinfo->ht40_1sindex[rfpath][group] = 1410 EEPROM_DEFAULT_TXPOWERLEVEL_2G; 1411 } else { 1412 pwrinfo->ht40_1sindex[rfpath][group] = 1413 EEPROM_DEFAULT_TXPOWERLEVEL_5G; 1414 } 1415 pwrinfo->ht40_2sindexdiff[rfpath][group] = 1416 EEPROM_DEFAULT_HT40_2SDIFF; 1417 pwrinfo->ht20indexdiff[rfpath][group] = 1418 EEPROM_DEFAULT_HT20_DIFF; 1419 pwrinfo->ofdmindexdiff[rfpath][group] = 1420 EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; 1421 pwrinfo->ht40maxoffset[rfpath][group] = 1422 EEPROM_DEFAULT_HT40_PWRMAXOFFSET; 1423 pwrinfo->ht20maxoffset[rfpath][group] = 1424 EEPROM_DEFAULT_HT20_PWRMAXOFFSET; 1425 } 1426 } 1427 for (i = 0; i < 3; i++) { 1428 pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI; 1429 pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI; 1430 } 1431 return; 1432 } 1433 1434 /* Maybe autoload OK,buf the tx power index value is not filled. 1435 * If we find it, we set it to default value. */ 1436 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1437 for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) { 1438 eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3) 1439 + group; 1440 pwrinfo->cck_index[rfpath][group] = 1441 (rom_content[eeaddr] == 0xFF) ? 1442 (eeaddr > 0x7B ? 1443 EEPROM_DEFAULT_TXPOWERLEVEL_5G : 1444 EEPROM_DEFAULT_TXPOWERLEVEL_2G) : 1445 rom_content[eeaddr]; 1446 } 1447 } 1448 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1449 for (group = 0; group < CHANNEL_GROUP_MAX; group++) { 1450 offset1 = group / 3; 1451 offset2 = group % 3; 1452 eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) + 1453 offset2 + offset1 * 21; 1454 pwrinfo->ht40_1sindex[rfpath][group] = 1455 (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ? 1456 EEPROM_DEFAULT_TXPOWERLEVEL_5G : 1457 EEPROM_DEFAULT_TXPOWERLEVEL_2G) : 1458 rom_content[eeaddr]; 1459 } 1460 } 1461 /* These just for 92D efuse offset. */ 1462 for (group = 0; group < CHANNEL_GROUP_MAX; group++) { 1463 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1464 int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G; 1465 1466 offset1 = group / 3; 1467 offset2 = group % 3; 1468 1469 if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF) 1470 pwrinfo->ht40_2sindexdiff[rfpath][group] = 1471 (rom_content[base1 + 1472 offset2 + offset1 * 21] >> (rfpath * 4)) 1473 & 0xF; 1474 else 1475 pwrinfo->ht40_2sindexdiff[rfpath][group] = 1476 EEPROM_DEFAULT_HT40_2SDIFF; 1477 if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2 1478 + offset1 * 21] != 0xFF) 1479 pwrinfo->ht20indexdiff[rfpath][group] = 1480 (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G 1481 + offset2 + offset1 * 21] >> (rfpath * 4)) 1482 & 0xF; 1483 else 1484 pwrinfo->ht20indexdiff[rfpath][group] = 1485 EEPROM_DEFAULT_HT20_DIFF; 1486 if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2 1487 + offset1 * 21] != 0xFF) 1488 pwrinfo->ofdmindexdiff[rfpath][group] = 1489 (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G 1490 + offset2 + offset1 * 21] >> (rfpath * 4)) 1491 & 0xF; 1492 else 1493 pwrinfo->ofdmindexdiff[rfpath][group] = 1494 EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; 1495 if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2 1496 + offset1 * 21] != 0xFF) 1497 pwrinfo->ht40maxoffset[rfpath][group] = 1498 (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G 1499 + offset2 + offset1 * 21] >> (rfpath * 4)) 1500 & 0xF; 1501 else 1502 pwrinfo->ht40maxoffset[rfpath][group] = 1503 EEPROM_DEFAULT_HT40_PWRMAXOFFSET; 1504 if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2 1505 + offset1 * 21] != 0xFF) 1506 pwrinfo->ht20maxoffset[rfpath][group] = 1507 (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + 1508 offset2 + offset1 * 21] >> (rfpath * 4)) & 1509 0xF; 1510 else 1511 pwrinfo->ht20maxoffset[rfpath][group] = 1512 EEPROM_DEFAULT_HT20_PWRMAXOFFSET; 1513 } 1514 } 1515 if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) { 1516 /* 5GL */ 1517 pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F; 1518 pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F; 1519 /* 5GM */ 1520 pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F; 1521 pwrinfo->tssi_b[1] = 1522 (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 | 1523 (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2; 1524 /* 5GH */ 1525 pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] & 1526 0xF0) >> 4 | 1527 (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4; 1528 pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] & 1529 0xFC) >> 2; 1530 } else { 1531 for (i = 0; i < 3; i++) { 1532 pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI; 1533 pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI; 1534 } 1535 } 1536} 1537 1538static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw, 1539 bool autoload_fail, u8 *hwinfo) 1540{ 1541 struct rtl_priv *rtlpriv = rtl_priv(hw); 1542 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 1543 struct txpower_info pwrinfo; 1544 u8 tempval[2], i, pwr, diff; 1545 u32 ch, rfpath, group; 1546 1547 _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail); 1548 if (!autoload_fail) { 1549 /* bit0~2 */ 1550 rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7); 1551 rtlefuse->eeprom_thermalmeter = 1552 hwinfo[EEPROM_THERMAL_METER] & 0x1f; 1553 rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K]; 1554 tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03; 1555 tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2; 1556 rtlefuse->txpwr_fromeprom = true; 1557 if (IS_92D_D_CUT(rtlpriv->rtlhal.version) || 1558 IS_92D_E_CUT(rtlpriv->rtlhal.version)) { 1559 rtlefuse->internal_pa_5g[0] = 1560 !((hwinfo[EEPROM_TSSI_A_5G] & BIT(6)) >> 6); 1561 rtlefuse->internal_pa_5g[1] = 1562 !((hwinfo[EEPROM_TSSI_B_5G] & BIT(6)) >> 6); 1563 rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, 1564 "Is D cut,Internal PA0 %d Internal PA1 %d\n", 1565 rtlefuse->internal_pa_5g[0], 1566 rtlefuse->internal_pa_5g[1]); 1567 } 1568 rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6]; 1569 rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7]; 1570 } else { 1571 rtlefuse->eeprom_regulatory = 0; 1572 rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER; 1573 rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP; 1574 tempval[0] = tempval[1] = 3; 1575 } 1576 1577 /* Use default value to fill parameters if 1578 * efuse is not filled on some place. */ 1579 1580 /* ThermalMeter from EEPROM */ 1581 if (rtlefuse->eeprom_thermalmeter < 0x06 || 1582 rtlefuse->eeprom_thermalmeter > 0x1c) 1583 rtlefuse->eeprom_thermalmeter = 0x12; 1584 rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter; 1585 1586 /* check XTAL_K */ 1587 if (rtlefuse->crystalcap == 0xFF) 1588 rtlefuse->crystalcap = 0; 1589 if (rtlefuse->eeprom_regulatory > 3) 1590 rtlefuse->eeprom_regulatory = 0; 1591 1592 for (i = 0; i < 2; i++) { 1593 switch (tempval[i]) { 1594 case 0: 1595 tempval[i] = 5; 1596 break; 1597 case 1: 1598 tempval[i] = 4; 1599 break; 1600 case 2: 1601 tempval[i] = 3; 1602 break; 1603 case 3: 1604 default: 1605 tempval[i] = 0; 1606 break; 1607 } 1608 } 1609 1610 rtlefuse->delta_iqk = tempval[0]; 1611 if (tempval[1] > 0) 1612 rtlefuse->delta_lck = tempval[1] - 1; 1613 if (rtlefuse->eeprom_c9 == 0xFF) 1614 rtlefuse->eeprom_c9 = 0x00; 1615 rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, 1616 "EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory); 1617 rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, 1618 "ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter); 1619 rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, 1620 "CrystalCap = 0x%x\n", rtlefuse->crystalcap); 1621 rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, 1622 "Delta_IQK = 0x%x Delta_LCK = 0x%x\n", 1623 rtlefuse->delta_iqk, rtlefuse->delta_lck); 1624 1625 for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { 1626 for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) { 1627 group = rtl92d_get_chnlgroup_fromarray((u8) ch); 1628 if (ch < CHANNEL_MAX_NUMBER_2G) 1629 rtlefuse->txpwrlevel_cck[rfpath][ch] = 1630 pwrinfo.cck_index[rfpath][group]; 1631 rtlefuse->txpwrlevel_ht40_1s[rfpath][ch] = 1632 pwrinfo.ht40_1sindex[rfpath][group]; 1633 rtlefuse->txpwr_ht20diff[rfpath][ch] = 1634 pwrinfo.ht20indexdiff[rfpath][group]; 1635 rtlefuse->txpwr_legacyhtdiff[rfpath][ch] = 1636 pwrinfo.ofdmindexdiff[rfpath][group]; 1637 rtlefuse->pwrgroup_ht20[rfpath][ch] = 1638 pwrinfo.ht20maxoffset[rfpath][group]; 1639 rtlefuse->pwrgroup_ht40[rfpath][ch] = 1640 pwrinfo.ht40maxoffset[rfpath][group]; 1641 pwr = pwrinfo.ht40_1sindex[rfpath][group]; 1642 diff = pwrinfo.ht40_2sindexdiff[rfpath][group]; 1643 rtlefuse->txpwrlevel_ht40_2s[rfpath][ch] = 1644 (pwr > diff) ? (pwr - diff) : 0; 1645 } 1646 } 1647} 1648 1649static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw, 1650 u8 *content) 1651{ 1652 struct rtl_priv *rtlpriv = rtl_priv(hw); 1653 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1654 u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION]; 1655 1656 if (macphy_crvalue & BIT(3)) { 1657 rtlhal->macphymode = SINGLEMAC_SINGLEPHY; 1658 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 1659 "MacPhyMode SINGLEMAC_SINGLEPHY\n"); 1660 } else { 1661 rtlhal->macphymode = DUALMAC_DUALPHY; 1662 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, 1663 "MacPhyMode DUALMAC_DUALPHY\n"); 1664 } 1665} 1666 1667static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw, 1668 u8 *content) 1669{ 1670 _rtl92de_read_macphymode_from_prom(hw, content); 1671 rtl92d_phy_config_macphymode(hw); 1672 rtl92d_phy_config_macphymode_info(hw); 1673} 1674 1675static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw) 1676{ 1677 struct rtl_priv *rtlpriv = rtl_priv(hw); 1678 enum version_8192d chipver = rtlpriv->rtlhal.version; 1679 u8 cutvalue[2]; 1680 u16 chipvalue; 1681 1682 rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H, 1683 &cutvalue[1]); 1684 rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L, 1685 &cutvalue[0]); 1686 chipvalue = (cutvalue[1] << 8) | cutvalue[0]; 1687 switch (chipvalue) { 1688 case 0xAA55: 1689 chipver |= CHIP_92D_C_CUT; 1690 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "C-CUT!!!\n"); 1691 break; 1692 case 0x9966: 1693 chipver |= CHIP_92D_D_CUT; 1694 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n"); 1695 break; 1696 case 0xCC33: 1697 chipver |= CHIP_92D_E_CUT; 1698 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n"); 1699 break; 1700 default: 1701 chipver |= CHIP_92D_D_CUT; 1702 pr_err("Unknown CUT!\n"); 1703 break; 1704 } 1705 rtlpriv->rtlhal.version = chipver; 1706} 1707 1708static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw) 1709{ 1710 struct rtl_priv *rtlpriv = rtl_priv(hw); 1711 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 1712 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1713 int params[] = {RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID, 1714 EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR_MAC0_92D, 1715 EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID, 1716 COUNTRY_CODE_WORLD_WIDE_13}; 1717 int i; 1718 u16 usvalue; 1719 u8 *hwinfo; 1720 1721 hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL); 1722 if (!hwinfo) 1723 return; 1724 1725 if (rtl_get_hwinfo(hw, rtlpriv, HWSET_MAX_SIZE, hwinfo, params)) 1726 goto exit; 1727 1728 _rtl92de_efuse_update_chip_version(hw); 1729 _rtl92de_read_macphymode_and_bandtype(hw, hwinfo); 1730 1731 /* Read Permanent MAC address for 2nd interface */ 1732 if (rtlhal->interfaceindex != 0) { 1733 for (i = 0; i < 6; i += 2) { 1734 usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i]; 1735 *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; 1736 } 1737 } 1738 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, 1739 rtlefuse->dev_addr); 1740 rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr); 1741 _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo); 1742 1743 /* Read Channel Plan */ 1744 switch (rtlhal->bandset) { 1745 case BAND_ON_2_4G: 1746 rtlefuse->channel_plan = COUNTRY_CODE_TELEC; 1747 break; 1748 case BAND_ON_5G: 1749 rtlefuse->channel_plan = COUNTRY_CODE_FCC; 1750 break; 1751 case BAND_ON_BOTH: 1752 rtlefuse->channel_plan = COUNTRY_CODE_FCC; 1753 break; 1754 default: 1755 rtlefuse->channel_plan = COUNTRY_CODE_FCC; 1756 break; 1757 } 1758 rtlefuse->txpwr_fromeprom = true; 1759exit: 1760 kfree(hwinfo); 1761} 1762 1763void rtl92de_read_eeprom_info(struct ieee80211_hw *hw) 1764{ 1765 struct rtl_priv *rtlpriv = rtl_priv(hw); 1766 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 1767 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1768 u8 tmp_u1b; 1769 1770 rtlhal->version = _rtl92de_read_chip_version(hw); 1771 tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR); 1772 rtlefuse->autoload_status = tmp_u1b; 1773 if (tmp_u1b & BIT(4)) { 1774 rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n"); 1775 rtlefuse->epromtype = EEPROM_93C46; 1776 } else { 1777 rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n"); 1778 rtlefuse->epromtype = EEPROM_BOOT_EFUSE; 1779 } 1780 if (tmp_u1b & BIT(5)) { 1781 rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); 1782 1783 rtlefuse->autoload_failflag = false; 1784 _rtl92de_read_adapter_info(hw); 1785 } else { 1786 pr_err("Autoload ERR!!\n"); 1787 } 1788 return; 1789} 1790 1791static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw, 1792 struct ieee80211_sta *sta) 1793{ 1794 struct rtl_priv *rtlpriv = rtl_priv(hw); 1795 struct rtl_phy *rtlphy = &(rtlpriv->phy); 1796 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1797 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1798 u32 ratr_value; 1799 u8 ratr_index = 0; 1800 u8 nmode = mac->ht_enable; 1801 u8 mimo_ps = IEEE80211_SMPS_OFF; 1802 u16 shortgi_rate; 1803 u32 tmp_ratr_value; 1804 u8 curtxbw_40mhz = mac->bw_40; 1805 u8 curshortgi_40mhz = (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1806 1 : 0; 1807 u8 curshortgi_20mhz = (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1808 1 : 0; 1809 enum wireless_mode wirelessmode = mac->mode; 1810 1811 if (rtlhal->current_bandtype == BAND_ON_5G) 1812 ratr_value = sta->deflink.supp_rates[1] << 4; 1813 else 1814 ratr_value = sta->deflink.supp_rates[0]; 1815 ratr_value |= (sta->deflink.ht_cap.mcs.rx_mask[1] << 20 | 1816 sta->deflink.ht_cap.mcs.rx_mask[0] << 12); 1817 switch (wirelessmode) { 1818 case WIRELESS_MODE_A: 1819 ratr_value &= 0x00000FF0; 1820 break; 1821 case WIRELESS_MODE_B: 1822 if (ratr_value & 0x0000000c) 1823 ratr_value &= 0x0000000d; 1824 else 1825 ratr_value &= 0x0000000f; 1826 break; 1827 case WIRELESS_MODE_G: 1828 ratr_value &= 0x00000FF5; 1829 break; 1830 case WIRELESS_MODE_N_24G: 1831 case WIRELESS_MODE_N_5G: 1832 nmode = 1; 1833 if (mimo_ps == IEEE80211_SMPS_STATIC) { 1834 ratr_value &= 0x0007F005; 1835 } else { 1836 u32 ratr_mask; 1837 1838 if (get_rf_type(rtlphy) == RF_1T2R || 1839 get_rf_type(rtlphy) == RF_1T1R) { 1840 ratr_mask = 0x000ff005; 1841 } else { 1842 ratr_mask = 0x0f0ff005; 1843 } 1844 1845 ratr_value &= ratr_mask; 1846 } 1847 break; 1848 default: 1849 if (rtlphy->rf_type == RF_1T2R) 1850 ratr_value &= 0x000ff0ff; 1851 else 1852 ratr_value &= 0x0f0ff0ff; 1853 1854 break; 1855 } 1856 ratr_value &= 0x0FFFFFFF; 1857 if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || 1858 (!curtxbw_40mhz && curshortgi_20mhz))) { 1859 ratr_value |= 0x10000000; 1860 tmp_ratr_value = (ratr_value >> 12); 1861 for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { 1862 if ((1 << shortgi_rate) & tmp_ratr_value) 1863 break; 1864 } 1865 shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | 1866 (shortgi_rate << 4) | (shortgi_rate); 1867 } 1868 rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); 1869 rtl_dbg(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", 1870 rtl_read_dword(rtlpriv, REG_ARFR0)); 1871} 1872 1873static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, 1874 struct ieee80211_sta *sta, u8 rssi_level, bool update_bw) 1875{ 1876 struct rtl_priv *rtlpriv = rtl_priv(hw); 1877 struct rtl_phy *rtlphy = &(rtlpriv->phy); 1878 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 1879 struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); 1880 struct rtl_sta_info *sta_entry = NULL; 1881 u32 ratr_bitmap; 1882 u8 ratr_index; 1883 u8 curtxbw_40mhz = (sta->deflink.bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; 1884 u8 curshortgi_40mhz = (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1885 1 : 0; 1886 u8 curshortgi_20mhz = (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1887 1 : 0; 1888 enum wireless_mode wirelessmode = 0; 1889 bool shortgi = false; 1890 u32 value[2]; 1891 u8 macid = 0; 1892 u8 mimo_ps = IEEE80211_SMPS_OFF; 1893 1894 sta_entry = (struct rtl_sta_info *) sta->drv_priv; 1895 mimo_ps = sta_entry->mimo_ps; 1896 wirelessmode = sta_entry->wireless_mode; 1897 if (mac->opmode == NL80211_IFTYPE_STATION) 1898 curtxbw_40mhz = mac->bw_40; 1899 else if (mac->opmode == NL80211_IFTYPE_AP || 1900 mac->opmode == NL80211_IFTYPE_ADHOC) 1901 macid = sta->aid + 1; 1902 1903 if (rtlhal->current_bandtype == BAND_ON_5G) 1904 ratr_bitmap = sta->deflink.supp_rates[1] << 4; 1905 else 1906 ratr_bitmap = sta->deflink.supp_rates[0]; 1907 ratr_bitmap |= (sta->deflink.ht_cap.mcs.rx_mask[1] << 20 | 1908 sta->deflink.ht_cap.mcs.rx_mask[0] << 12); 1909 switch (wirelessmode) { 1910 case WIRELESS_MODE_B: 1911 ratr_index = RATR_INX_WIRELESS_B; 1912 if (ratr_bitmap & 0x0000000c) 1913 ratr_bitmap &= 0x0000000d; 1914 else 1915 ratr_bitmap &= 0x0000000f; 1916 break; 1917 case WIRELESS_MODE_G: 1918 ratr_index = RATR_INX_WIRELESS_GB; 1919 1920 if (rssi_level == 1) 1921 ratr_bitmap &= 0x00000f00; 1922 else if (rssi_level == 2) 1923 ratr_bitmap &= 0x00000ff0; 1924 else 1925 ratr_bitmap &= 0x00000ff5; 1926 break; 1927 case WIRELESS_MODE_A: 1928 ratr_index = RATR_INX_WIRELESS_G; 1929 ratr_bitmap &= 0x00000ff0; 1930 break; 1931 case WIRELESS_MODE_N_24G: 1932 case WIRELESS_MODE_N_5G: 1933 if (wirelessmode == WIRELESS_MODE_N_24G) 1934 ratr_index = RATR_INX_WIRELESS_NGB; 1935 else 1936 ratr_index = RATR_INX_WIRELESS_NG; 1937 if (mimo_ps == IEEE80211_SMPS_STATIC) { 1938 if (rssi_level == 1) 1939 ratr_bitmap &= 0x00070000; 1940 else if (rssi_level == 2) 1941 ratr_bitmap &= 0x0007f000; 1942 else 1943 ratr_bitmap &= 0x0007f005; 1944 } else { 1945 if (rtlphy->rf_type == RF_1T2R || 1946 rtlphy->rf_type == RF_1T1R) { 1947 if (curtxbw_40mhz) { 1948 if (rssi_level == 1) 1949 ratr_bitmap &= 0x000f0000; 1950 else if (rssi_level == 2) 1951 ratr_bitmap &= 0x000ff000; 1952 else 1953 ratr_bitmap &= 0x000ff015; 1954 } else { 1955 if (rssi_level == 1) 1956 ratr_bitmap &= 0x000f0000; 1957 else if (rssi_level == 2) 1958 ratr_bitmap &= 0x000ff000; 1959 else 1960 ratr_bitmap &= 0x000ff005; 1961 } 1962 } else { 1963 if (curtxbw_40mhz) { 1964 if (rssi_level == 1) 1965 ratr_bitmap &= 0x0f0f0000; 1966 else if (rssi_level == 2) 1967 ratr_bitmap &= 0x0f0ff000; 1968 else 1969 ratr_bitmap &= 0x0f0ff015; 1970 } else { 1971 if (rssi_level == 1) 1972 ratr_bitmap &= 0x0f0f0000; 1973 else if (rssi_level == 2) 1974 ratr_bitmap &= 0x0f0ff000; 1975 else 1976 ratr_bitmap &= 0x0f0ff005; 1977 } 1978 } 1979 } 1980 if ((curtxbw_40mhz && curshortgi_40mhz) || 1981 (!curtxbw_40mhz && curshortgi_20mhz)) { 1982 1983 if (macid == 0) 1984 shortgi = true; 1985 else if (macid == 1) 1986 shortgi = false; 1987 } 1988 break; 1989 default: 1990 ratr_index = RATR_INX_WIRELESS_NGB; 1991 1992 if (rtlphy->rf_type == RF_1T2R) 1993 ratr_bitmap &= 0x000ff0ff; 1994 else 1995 ratr_bitmap &= 0x0f0ff0ff; 1996 break; 1997 } 1998 1999 value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28); 2000 value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80; 2001 rtl_dbg(rtlpriv, COMP_RATR, DBG_DMESG, 2002 "ratr_bitmap :%x value0:%x value1:%x\n", 2003 ratr_bitmap, value[0], value[1]); 2004 rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value); 2005 if (macid != 0) 2006 sta_entry->ratr_index = ratr_index; 2007} 2008 2009void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw, 2010 struct ieee80211_sta *sta, u8 rssi_level, bool update_bw) 2011{ 2012 struct rtl_priv *rtlpriv = rtl_priv(hw); 2013 2014 if (rtlpriv->dm.useramask) 2015 rtl92de_update_hal_rate_mask(hw, sta, rssi_level, update_bw); 2016 else 2017 rtl92de_update_hal_rate_table(hw, sta); 2018} 2019 2020void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw) 2021{ 2022 struct rtl_priv *rtlpriv = rtl_priv(hw); 2023 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 2024 u16 sifs_timer; 2025 2026 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, 2027 &mac->slot_time); 2028 if (!mac->ht_enable) 2029 sifs_timer = 0x0a0a; 2030 else 2031 sifs_timer = 0x1010; 2032 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); 2033} 2034 2035bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) 2036{ 2037 struct rtl_priv *rtlpriv = rtl_priv(hw); 2038 struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); 2039 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 2040 enum rf_pwrstate e_rfpowerstate_toset; 2041 u8 u1tmp; 2042 bool actuallyset = false; 2043 unsigned long flag; 2044 2045 if (rtlpci->being_init_adapter) 2046 return false; 2047 if (ppsc->swrf_processing) 2048 return false; 2049 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); 2050 if (ppsc->rfchange_inprogress) { 2051 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2052 return false; 2053 } else { 2054 ppsc->rfchange_inprogress = true; 2055 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2056 } 2057 rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv, 2058 REG_MAC_PINMUX_CFG) & ~(BIT(3))); 2059 u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL); 2060 e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF; 2061 if (ppsc->hwradiooff && (e_rfpowerstate_toset == ERFON)) { 2062 rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG, 2063 "GPIOChangeRF - HW Radio ON, RF ON\n"); 2064 e_rfpowerstate_toset = ERFON; 2065 ppsc->hwradiooff = false; 2066 actuallyset = true; 2067 } else if (!ppsc->hwradiooff && (e_rfpowerstate_toset == ERFOFF)) { 2068 rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG, 2069 "GPIOChangeRF - HW Radio OFF, RF OFF\n"); 2070 e_rfpowerstate_toset = ERFOFF; 2071 ppsc->hwradiooff = true; 2072 actuallyset = true; 2073 } 2074 if (actuallyset) { 2075 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); 2076 ppsc->rfchange_inprogress = false; 2077 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2078 } else { 2079 if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) 2080 RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); 2081 spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); 2082 ppsc->rfchange_inprogress = false; 2083 spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); 2084 } 2085 *valid = 1; 2086 return !ppsc->hwradiooff; 2087} 2088 2089void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index, 2090 u8 *p_macaddr, bool is_group, u8 enc_algo, 2091 bool is_wepkey, bool clear_all) 2092{ 2093 struct rtl_priv *rtlpriv = rtl_priv(hw); 2094 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 2095 struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); 2096 u8 *macaddr = p_macaddr; 2097 u32 entry_id; 2098 bool is_pairwise = false; 2099 static u8 cam_const_addr[4][6] = { 2100 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, 2101 {0x00, 0x00, 0x00, 0x00, 0x00, 0x01}, 2102 {0x00, 0x00, 0x00, 0x00, 0x00, 0x02}, 2103 {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} 2104 }; 2105 static u8 cam_const_broad[] = { 2106 0xff, 0xff, 0xff, 0xff, 0xff, 0xff 2107 }; 2108 2109 if (clear_all) { 2110 u8 idx; 2111 u8 cam_offset = 0; 2112 u8 clear_number = 5; 2113 rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n"); 2114 for (idx = 0; idx < clear_number; idx++) { 2115 rtl_cam_mark_invalid(hw, cam_offset + idx); 2116 rtl_cam_empty_entry(hw, cam_offset + idx); 2117 2118 if (idx < 5) { 2119 memset(rtlpriv->sec.key_buf[idx], 0, 2120 MAX_KEY_LEN); 2121 rtlpriv->sec.key_len[idx] = 0; 2122 } 2123 } 2124 } else { 2125 switch (enc_algo) { 2126 case WEP40_ENCRYPTION: 2127 enc_algo = CAM_WEP40; 2128 break; 2129 case WEP104_ENCRYPTION: 2130 enc_algo = CAM_WEP104; 2131 break; 2132 case TKIP_ENCRYPTION: 2133 enc_algo = CAM_TKIP; 2134 break; 2135 case AESCCMP_ENCRYPTION: 2136 enc_algo = CAM_AES; 2137 break; 2138 default: 2139 pr_err("switch case %#x not processed\n", 2140 enc_algo); 2141 enc_algo = CAM_TKIP; 2142 break; 2143 } 2144 if (is_wepkey || rtlpriv->sec.use_defaultkey) { 2145 macaddr = cam_const_addr[key_index]; 2146 entry_id = key_index; 2147 } else { 2148 if (is_group) { 2149 macaddr = cam_const_broad; 2150 entry_id = key_index; 2151 } else { 2152 if (mac->opmode == NL80211_IFTYPE_AP) { 2153 entry_id = rtl_cam_get_free_entry(hw, 2154 p_macaddr); 2155 if (entry_id >= TOTAL_CAM_ENTRY) { 2156 pr_err("Can not find free hw security cam entry\n"); 2157 return; 2158 } 2159 } else { 2160 entry_id = CAM_PAIRWISE_KEY_POSITION; 2161 } 2162 key_index = PAIRWISE_KEYIDX; 2163 is_pairwise = true; 2164 } 2165 } 2166 if (rtlpriv->sec.key_len[key_index] == 0) { 2167 rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, 2168 "delete one entry, entry_id is %d\n", 2169 entry_id); 2170 if (mac->opmode == NL80211_IFTYPE_AP) 2171 rtl_cam_del_entry(hw, p_macaddr); 2172 rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); 2173 } else { 2174 rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, 2175 "The insert KEY length is %d\n", 2176 rtlpriv->sec.key_len[PAIRWISE_KEYIDX]); 2177 rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, 2178 "The insert KEY is %x %x\n", 2179 rtlpriv->sec.key_buf[0][0], 2180 rtlpriv->sec.key_buf[0][1]); 2181 rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, 2182 "add one entry\n"); 2183 if (is_pairwise) { 2184 RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD, 2185 "Pairwise Key content", 2186 rtlpriv->sec.pairwise_key, 2187 rtlpriv-> 2188 sec.key_len[PAIRWISE_KEYIDX]); 2189 rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, 2190 "set Pairwise key\n"); 2191 rtl_cam_add_one_entry(hw, macaddr, key_index, 2192 entry_id, enc_algo, 2193 CAM_CONFIG_NO_USEDK, 2194 rtlpriv-> 2195 sec.key_buf[key_index]); 2196 } else { 2197 rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, 2198 "set group key\n"); 2199 if (mac->opmode == NL80211_IFTYPE_ADHOC) { 2200 rtl_cam_add_one_entry(hw, 2201 rtlefuse->dev_addr, 2202 PAIRWISE_KEYIDX, 2203 CAM_PAIRWISE_KEY_POSITION, 2204 enc_algo, CAM_CONFIG_NO_USEDK, 2205 rtlpriv->sec.key_buf[entry_id]); 2206 } 2207 rtl_cam_add_one_entry(hw, macaddr, key_index, 2208 entry_id, enc_algo, 2209 CAM_CONFIG_NO_USEDK, 2210 rtlpriv->sec.key_buf 2211 [entry_id]); 2212 } 2213 } 2214 } 2215} 2216 2217void rtl92de_suspend(struct ieee80211_hw *hw) 2218{ 2219 struct rtl_priv *rtlpriv = rtl_priv(hw); 2220 2221 rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv, 2222 REG_MAC_PHY_CTRL_NORMAL); 2223} 2224 2225void rtl92de_resume(struct ieee80211_hw *hw) 2226{ 2227 struct rtl_priv *rtlpriv = rtl_priv(hw); 2228 2229 rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL, 2230 rtlpriv->rtlhal.macphyctl_reg); 2231}