hwio.c (7236B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Low-level device IO routines for ST-Ericsson CW1200 drivers 4 * 5 * Copyright (c) 2010, ST-Ericsson 6 * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> 7 * 8 * Based on: 9 * ST-Ericsson UMAC CW1200 driver, which is 10 * Copyright (c) 2010, ST-Ericsson 11 * Author: Ajitpal Singh <ajitpal.singh@lockless.no> 12 */ 13 14#include <linux/types.h> 15 16#include "cw1200.h" 17#include "hwio.h" 18#include "hwbus.h" 19 20 /* Sdio addr is 4*spi_addr */ 21#define SPI_REG_ADDR_TO_SDIO(spi_reg_addr) ((spi_reg_addr) << 2) 22#define SDIO_ADDR17BIT(buf_id, mpf, rfu, reg_id_ofs) \ 23 ((((buf_id) & 0x1F) << 7) \ 24 | (((mpf) & 1) << 6) \ 25 | (((rfu) & 1) << 5) \ 26 | (((reg_id_ofs) & 0x1F) << 0)) 27#define MAX_RETRY 3 28 29 30static int __cw1200_reg_read(struct cw1200_common *priv, u16 addr, 31 void *buf, size_t buf_len, int buf_id) 32{ 33 u16 addr_sdio; 34 u32 sdio_reg_addr_17bit; 35 36 /* Check if buffer is aligned to 4 byte boundary */ 37 if (WARN_ON(((unsigned long)buf & 3) && (buf_len > 4))) { 38 pr_err("buffer is not aligned.\n"); 39 return -EINVAL; 40 } 41 42 /* Convert to SDIO Register Address */ 43 addr_sdio = SPI_REG_ADDR_TO_SDIO(addr); 44 sdio_reg_addr_17bit = SDIO_ADDR17BIT(buf_id, 0, 0, addr_sdio); 45 46 return priv->hwbus_ops->hwbus_memcpy_fromio(priv->hwbus_priv, 47 sdio_reg_addr_17bit, 48 buf, buf_len); 49} 50 51static int __cw1200_reg_write(struct cw1200_common *priv, u16 addr, 52 const void *buf, size_t buf_len, int buf_id) 53{ 54 u16 addr_sdio; 55 u32 sdio_reg_addr_17bit; 56 57 /* Convert to SDIO Register Address */ 58 addr_sdio = SPI_REG_ADDR_TO_SDIO(addr); 59 sdio_reg_addr_17bit = SDIO_ADDR17BIT(buf_id, 0, 0, addr_sdio); 60 61 return priv->hwbus_ops->hwbus_memcpy_toio(priv->hwbus_priv, 62 sdio_reg_addr_17bit, 63 buf, buf_len); 64} 65 66static inline int __cw1200_reg_read_32(struct cw1200_common *priv, 67 u16 addr, u32 *val) 68{ 69 __le32 tmp; 70 int i = __cw1200_reg_read(priv, addr, &tmp, sizeof(tmp), 0); 71 *val = le32_to_cpu(tmp); 72 return i; 73} 74 75static inline int __cw1200_reg_write_32(struct cw1200_common *priv, 76 u16 addr, u32 val) 77{ 78 __le32 tmp = cpu_to_le32(val); 79 return __cw1200_reg_write(priv, addr, &tmp, sizeof(tmp), 0); 80} 81 82static inline int __cw1200_reg_read_16(struct cw1200_common *priv, 83 u16 addr, u16 *val) 84{ 85 __le16 tmp; 86 int i = __cw1200_reg_read(priv, addr, &tmp, sizeof(tmp), 0); 87 *val = le16_to_cpu(tmp); 88 return i; 89} 90 91static inline int __cw1200_reg_write_16(struct cw1200_common *priv, 92 u16 addr, u16 val) 93{ 94 __le16 tmp = cpu_to_le16(val); 95 return __cw1200_reg_write(priv, addr, &tmp, sizeof(tmp), 0); 96} 97 98int cw1200_reg_read(struct cw1200_common *priv, u16 addr, void *buf, 99 size_t buf_len) 100{ 101 int ret; 102 priv->hwbus_ops->lock(priv->hwbus_priv); 103 ret = __cw1200_reg_read(priv, addr, buf, buf_len, 0); 104 priv->hwbus_ops->unlock(priv->hwbus_priv); 105 return ret; 106} 107 108int cw1200_reg_write(struct cw1200_common *priv, u16 addr, const void *buf, 109 size_t buf_len) 110{ 111 int ret; 112 priv->hwbus_ops->lock(priv->hwbus_priv); 113 ret = __cw1200_reg_write(priv, addr, buf, buf_len, 0); 114 priv->hwbus_ops->unlock(priv->hwbus_priv); 115 return ret; 116} 117 118int cw1200_data_read(struct cw1200_common *priv, void *buf, size_t buf_len) 119{ 120 int ret, retry = 1; 121 int buf_id_rx = priv->buf_id_rx; 122 123 priv->hwbus_ops->lock(priv->hwbus_priv); 124 125 while (retry <= MAX_RETRY) { 126 ret = __cw1200_reg_read(priv, 127 ST90TDS_IN_OUT_QUEUE_REG_ID, buf, 128 buf_len, buf_id_rx + 1); 129 if (!ret) { 130 buf_id_rx = (buf_id_rx + 1) & 3; 131 priv->buf_id_rx = buf_id_rx; 132 break; 133 } else { 134 retry++; 135 mdelay(1); 136 pr_err("error :[%d]\n", ret); 137 } 138 } 139 140 priv->hwbus_ops->unlock(priv->hwbus_priv); 141 return ret; 142} 143 144int cw1200_data_write(struct cw1200_common *priv, const void *buf, 145 size_t buf_len) 146{ 147 int ret, retry = 1; 148 int buf_id_tx = priv->buf_id_tx; 149 150 priv->hwbus_ops->lock(priv->hwbus_priv); 151 152 while (retry <= MAX_RETRY) { 153 ret = __cw1200_reg_write(priv, 154 ST90TDS_IN_OUT_QUEUE_REG_ID, buf, 155 buf_len, buf_id_tx); 156 if (!ret) { 157 buf_id_tx = (buf_id_tx + 1) & 31; 158 priv->buf_id_tx = buf_id_tx; 159 break; 160 } else { 161 retry++; 162 mdelay(1); 163 pr_err("error :[%d]\n", ret); 164 } 165 } 166 167 priv->hwbus_ops->unlock(priv->hwbus_priv); 168 return ret; 169} 170 171int cw1200_indirect_read(struct cw1200_common *priv, u32 addr, void *buf, 172 size_t buf_len, u32 prefetch, u16 port_addr) 173{ 174 u32 val32 = 0; 175 int i, ret; 176 177 if ((buf_len / 2) >= 0x1000) { 178 pr_err("Can't read more than 0xfff words.\n"); 179 return -EINVAL; 180 } 181 182 priv->hwbus_ops->lock(priv->hwbus_priv); 183 /* Write address */ 184 ret = __cw1200_reg_write_32(priv, ST90TDS_SRAM_BASE_ADDR_REG_ID, addr); 185 if (ret < 0) { 186 pr_err("Can't write address register.\n"); 187 goto out; 188 } 189 190 /* Read CONFIG Register Value - We will read 32 bits */ 191 ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); 192 if (ret < 0) { 193 pr_err("Can't read config register.\n"); 194 goto out; 195 } 196 197 /* Set PREFETCH bit */ 198 ret = __cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, 199 val32 | prefetch); 200 if (ret < 0) { 201 pr_err("Can't write prefetch bit.\n"); 202 goto out; 203 } 204 205 /* Check for PRE-FETCH bit to be cleared */ 206 for (i = 0; i < 20; i++) { 207 ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); 208 if (ret < 0) { 209 pr_err("Can't check prefetch bit.\n"); 210 goto out; 211 } 212 if (!(val32 & prefetch)) 213 break; 214 215 mdelay(i); 216 } 217 218 if (val32 & prefetch) { 219 pr_err("Prefetch bit is not cleared.\n"); 220 goto out; 221 } 222 223 /* Read data port */ 224 ret = __cw1200_reg_read(priv, port_addr, buf, buf_len, 0); 225 if (ret < 0) { 226 pr_err("Can't read data port.\n"); 227 goto out; 228 } 229 230out: 231 priv->hwbus_ops->unlock(priv->hwbus_priv); 232 return ret; 233} 234 235int cw1200_apb_write(struct cw1200_common *priv, u32 addr, const void *buf, 236 size_t buf_len) 237{ 238 int ret; 239 240 if ((buf_len / 2) >= 0x1000) { 241 pr_err("Can't write more than 0xfff words.\n"); 242 return -EINVAL; 243 } 244 245 priv->hwbus_ops->lock(priv->hwbus_priv); 246 247 /* Write address */ 248 ret = __cw1200_reg_write_32(priv, ST90TDS_SRAM_BASE_ADDR_REG_ID, addr); 249 if (ret < 0) { 250 pr_err("Can't write address register.\n"); 251 goto out; 252 } 253 254 /* Write data port */ 255 ret = __cw1200_reg_write(priv, ST90TDS_SRAM_DPORT_REG_ID, 256 buf, buf_len, 0); 257 if (ret < 0) { 258 pr_err("Can't write data port.\n"); 259 goto out; 260 } 261 262out: 263 priv->hwbus_ops->unlock(priv->hwbus_priv); 264 return ret; 265} 266 267int __cw1200_irq_enable(struct cw1200_common *priv, int enable) 268{ 269 u32 val32; 270 u16 val16; 271 int ret; 272 273 if (HIF_8601_SILICON == priv->hw_type) { 274 ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); 275 if (ret < 0) { 276 pr_err("Can't read config register.\n"); 277 return ret; 278 } 279 280 if (enable) 281 val32 |= ST90TDS_CONF_IRQ_RDY_ENABLE; 282 else 283 val32 &= ~ST90TDS_CONF_IRQ_RDY_ENABLE; 284 285 ret = __cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, val32); 286 if (ret < 0) { 287 pr_err("Can't write config register.\n"); 288 return ret; 289 } 290 } else { 291 ret = __cw1200_reg_read_16(priv, ST90TDS_CONFIG_REG_ID, &val16); 292 if (ret < 0) { 293 pr_err("Can't read control register.\n"); 294 return ret; 295 } 296 297 if (enable) 298 val16 |= ST90TDS_CONT_IRQ_RDY_ENABLE; 299 else 300 val16 &= ~ST90TDS_CONT_IRQ_RDY_ENABLE; 301 302 ret = __cw1200_reg_write_16(priv, ST90TDS_CONFIG_REG_ID, val16); 303 if (ret < 0) { 304 pr_err("Can't write control register.\n"); 305 return ret; 306 } 307 } 308 return 0; 309}