pci-imx6.c (36090B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * PCIe host controller driver for Freescale i.MX6 SoCs 4 * 5 * Copyright (C) 2013 Kosagi 6 * https://www.kosagi.com 7 * 8 * Author: Sean Cross <xobs@kosagi.com> 9 */ 10 11#include <linux/bitfield.h> 12#include <linux/clk.h> 13#include <linux/delay.h> 14#include <linux/gpio.h> 15#include <linux/kernel.h> 16#include <linux/mfd/syscon.h> 17#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> 18#include <linux/mfd/syscon/imx7-iomuxc-gpr.h> 19#include <linux/module.h> 20#include <linux/of_gpio.h> 21#include <linux/of_device.h> 22#include <linux/of_address.h> 23#include <linux/pci.h> 24#include <linux/platform_device.h> 25#include <linux/regmap.h> 26#include <linux/regulator/consumer.h> 27#include <linux/resource.h> 28#include <linux/signal.h> 29#include <linux/types.h> 30#include <linux/interrupt.h> 31#include <linux/reset.h> 32#include <linux/phy/phy.h> 33#include <linux/pm_domain.h> 34#include <linux/pm_runtime.h> 35 36#include "pcie-designware.h" 37 38#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) 39#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) 40#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) 41#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12) 42#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) 43#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000 44 45#define to_imx6_pcie(x) dev_get_drvdata((x)->dev) 46 47enum imx6_pcie_variants { 48 IMX6Q, 49 IMX6SX, 50 IMX6QP, 51 IMX7D, 52 IMX8MQ, 53 IMX8MM, 54}; 55 56#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) 57#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1) 58#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2) 59 60struct imx6_pcie_drvdata { 61 enum imx6_pcie_variants variant; 62 u32 flags; 63 int dbi_length; 64}; 65 66struct imx6_pcie { 67 struct dw_pcie *pci; 68 int reset_gpio; 69 bool gpio_active_high; 70 struct clk *pcie_bus; 71 struct clk *pcie_phy; 72 struct clk *pcie_inbound_axi; 73 struct clk *pcie; 74 struct clk *pcie_aux; 75 struct regmap *iomuxc_gpr; 76 u32 controller_id; 77 struct reset_control *pciephy_reset; 78 struct reset_control *apps_reset; 79 struct reset_control *turnoff_reset; 80 u32 tx_deemph_gen1; 81 u32 tx_deemph_gen2_3p5db; 82 u32 tx_deemph_gen2_6db; 83 u32 tx_swing_full; 84 u32 tx_swing_low; 85 struct regulator *vpcie; 86 struct regulator *vph; 87 void __iomem *phy_base; 88 89 /* power domain for pcie */ 90 struct device *pd_pcie; 91 /* power domain for pcie phy */ 92 struct device *pd_pcie_phy; 93 struct phy *phy; 94 const struct imx6_pcie_drvdata *drvdata; 95}; 96 97/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */ 98#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200 99#define PHY_PLL_LOCK_WAIT_TIMEOUT (2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX) 100 101/* PCIe Port Logic registers (memory-mapped) */ 102#define PL_OFFSET 0x700 103 104#define PCIE_PHY_CTRL (PL_OFFSET + 0x114) 105#define PCIE_PHY_CTRL_DATA(x) FIELD_PREP(GENMASK(15, 0), (x)) 106#define PCIE_PHY_CTRL_CAP_ADR BIT(16) 107#define PCIE_PHY_CTRL_CAP_DAT BIT(17) 108#define PCIE_PHY_CTRL_WR BIT(18) 109#define PCIE_PHY_CTRL_RD BIT(19) 110 111#define PCIE_PHY_STAT (PL_OFFSET + 0x110) 112#define PCIE_PHY_STAT_ACK BIT(16) 113 114/* PHY registers (not memory-mapped) */ 115#define PCIE_PHY_ATEOVRD 0x10 116#define PCIE_PHY_ATEOVRD_EN BIT(2) 117#define PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT 0 118#define PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK 0x1 119 120#define PCIE_PHY_MPLL_OVRD_IN_LO 0x11 121#define PCIE_PHY_MPLL_MULTIPLIER_SHIFT 2 122#define PCIE_PHY_MPLL_MULTIPLIER_MASK 0x7f 123#define PCIE_PHY_MPLL_MULTIPLIER_OVRD BIT(9) 124 125#define PCIE_PHY_RX_ASIC_OUT 0x100D 126#define PCIE_PHY_RX_ASIC_OUT_VALID (1 << 0) 127 128/* iMX7 PCIe PHY registers */ 129#define PCIE_PHY_CMN_REG4 0x14 130/* These are probably the bits that *aren't* DCC_FB_EN */ 131#define PCIE_PHY_CMN_REG4_DCC_FB_EN 0x29 132 133#define PCIE_PHY_CMN_REG15 0x54 134#define PCIE_PHY_CMN_REG15_DLY_4 BIT(2) 135#define PCIE_PHY_CMN_REG15_PLL_PD BIT(5) 136#define PCIE_PHY_CMN_REG15_OVRD_PLL_PD BIT(7) 137 138#define PCIE_PHY_CMN_REG24 0x90 139#define PCIE_PHY_CMN_REG24_RX_EQ BIT(6) 140#define PCIE_PHY_CMN_REG24_RX_EQ_SEL BIT(3) 141 142#define PCIE_PHY_CMN_REG26 0x98 143#define PCIE_PHY_CMN_REG26_ATT_MODE 0xBC 144 145#define PHY_RX_OVRD_IN_LO 0x1005 146#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5) 147#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3) 148 149static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val) 150{ 151 struct dw_pcie *pci = imx6_pcie->pci; 152 bool val; 153 u32 max_iterations = 10; 154 u32 wait_counter = 0; 155 156 do { 157 val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT) & 158 PCIE_PHY_STAT_ACK; 159 wait_counter++; 160 161 if (val == exp_val) 162 return 0; 163 164 udelay(1); 165 } while (wait_counter < max_iterations); 166 167 return -ETIMEDOUT; 168} 169 170static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr) 171{ 172 struct dw_pcie *pci = imx6_pcie->pci; 173 u32 val; 174 int ret; 175 176 val = PCIE_PHY_CTRL_DATA(addr); 177 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val); 178 179 val |= PCIE_PHY_CTRL_CAP_ADR; 180 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val); 181 182 ret = pcie_phy_poll_ack(imx6_pcie, true); 183 if (ret) 184 return ret; 185 186 val = PCIE_PHY_CTRL_DATA(addr); 187 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val); 188 189 return pcie_phy_poll_ack(imx6_pcie, false); 190} 191 192/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */ 193static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data) 194{ 195 struct dw_pcie *pci = imx6_pcie->pci; 196 u32 phy_ctl; 197 int ret; 198 199 ret = pcie_phy_wait_ack(imx6_pcie, addr); 200 if (ret) 201 return ret; 202 203 /* assert Read signal */ 204 phy_ctl = PCIE_PHY_CTRL_RD; 205 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl); 206 207 ret = pcie_phy_poll_ack(imx6_pcie, true); 208 if (ret) 209 return ret; 210 211 *data = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT); 212 213 /* deassert Read signal */ 214 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00); 215 216 return pcie_phy_poll_ack(imx6_pcie, false); 217} 218 219static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data) 220{ 221 struct dw_pcie *pci = imx6_pcie->pci; 222 u32 var; 223 int ret; 224 225 /* write addr */ 226 /* cap addr */ 227 ret = pcie_phy_wait_ack(imx6_pcie, addr); 228 if (ret) 229 return ret; 230 231 var = PCIE_PHY_CTRL_DATA(data); 232 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); 233 234 /* capture data */ 235 var |= PCIE_PHY_CTRL_CAP_DAT; 236 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); 237 238 ret = pcie_phy_poll_ack(imx6_pcie, true); 239 if (ret) 240 return ret; 241 242 /* deassert cap data */ 243 var = PCIE_PHY_CTRL_DATA(data); 244 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); 245 246 /* wait for ack de-assertion */ 247 ret = pcie_phy_poll_ack(imx6_pcie, false); 248 if (ret) 249 return ret; 250 251 /* assert wr signal */ 252 var = PCIE_PHY_CTRL_WR; 253 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); 254 255 /* wait for ack */ 256 ret = pcie_phy_poll_ack(imx6_pcie, true); 257 if (ret) 258 return ret; 259 260 /* deassert wr signal */ 261 var = PCIE_PHY_CTRL_DATA(data); 262 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); 263 264 /* wait for ack de-assertion */ 265 ret = pcie_phy_poll_ack(imx6_pcie, false); 266 if (ret) 267 return ret; 268 269 dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x0); 270 271 return 0; 272} 273 274static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie) 275{ 276 u16 tmp; 277 278 if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY)) 279 return; 280 281 pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp); 282 tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | 283 PHY_RX_OVRD_IN_LO_RX_PLL_EN); 284 pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); 285 286 usleep_range(2000, 3000); 287 288 pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp); 289 tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | 290 PHY_RX_OVRD_IN_LO_RX_PLL_EN); 291 pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); 292} 293 294#ifdef CONFIG_ARM 295/* Added for PCI abort handling */ 296static int imx6q_pcie_abort_handler(unsigned long addr, 297 unsigned int fsr, struct pt_regs *regs) 298{ 299 unsigned long pc = instruction_pointer(regs); 300 unsigned long instr = *(unsigned long *)pc; 301 int reg = (instr >> 12) & 15; 302 303 /* 304 * If the instruction being executed was a read, 305 * make it look like it read all-ones. 306 */ 307 if ((instr & 0x0c100000) == 0x04100000) { 308 unsigned long val; 309 310 if (instr & 0x00400000) 311 val = 255; 312 else 313 val = -1; 314 315 regs->uregs[reg] = val; 316 regs->ARM_pc += 4; 317 return 0; 318 } 319 320 if ((instr & 0x0e100090) == 0x00100090) { 321 regs->uregs[reg] = -1; 322 regs->ARM_pc += 4; 323 return 0; 324 } 325 326 return 1; 327} 328#endif 329 330static int imx6_pcie_attach_pd(struct device *dev) 331{ 332 struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); 333 struct device_link *link; 334 335 /* Do nothing when in a single power domain */ 336 if (dev->pm_domain) 337 return 0; 338 339 imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie"); 340 if (IS_ERR(imx6_pcie->pd_pcie)) 341 return PTR_ERR(imx6_pcie->pd_pcie); 342 /* Do nothing when power domain missing */ 343 if (!imx6_pcie->pd_pcie) 344 return 0; 345 link = device_link_add(dev, imx6_pcie->pd_pcie, 346 DL_FLAG_STATELESS | 347 DL_FLAG_PM_RUNTIME | 348 DL_FLAG_RPM_ACTIVE); 349 if (!link) { 350 dev_err(dev, "Failed to add device_link to pcie pd.\n"); 351 return -EINVAL; 352 } 353 354 imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy"); 355 if (IS_ERR(imx6_pcie->pd_pcie_phy)) 356 return PTR_ERR(imx6_pcie->pd_pcie_phy); 357 358 link = device_link_add(dev, imx6_pcie->pd_pcie_phy, 359 DL_FLAG_STATELESS | 360 DL_FLAG_PM_RUNTIME | 361 DL_FLAG_RPM_ACTIVE); 362 if (!link) { 363 dev_err(dev, "Failed to add device_link to pcie_phy pd.\n"); 364 return -EINVAL; 365 } 366 367 return 0; 368} 369 370static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) 371{ 372 struct device *dev = imx6_pcie->pci->dev; 373 374 switch (imx6_pcie->drvdata->variant) { 375 case IMX7D: 376 case IMX8MQ: 377 reset_control_assert(imx6_pcie->pciephy_reset); 378 fallthrough; 379 case IMX8MM: 380 reset_control_assert(imx6_pcie->apps_reset); 381 break; 382 case IMX6SX: 383 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 384 IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 385 IMX6SX_GPR12_PCIE_TEST_POWERDOWN); 386 /* Force PCIe PHY reset */ 387 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, 388 IMX6SX_GPR5_PCIE_BTNRST_RESET, 389 IMX6SX_GPR5_PCIE_BTNRST_RESET); 390 break; 391 case IMX6QP: 392 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, 393 IMX6Q_GPR1_PCIE_SW_RST, 394 IMX6Q_GPR1_PCIE_SW_RST); 395 break; 396 case IMX6Q: 397 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, 398 IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); 399 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, 400 IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); 401 break; 402 } 403 404 if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { 405 int ret = regulator_disable(imx6_pcie->vpcie); 406 407 if (ret) 408 dev_err(dev, "failed to disable vpcie regulator: %d\n", 409 ret); 410 } 411 412 /* Some boards don't have PCIe reset GPIO. */ 413 if (gpio_is_valid(imx6_pcie->reset_gpio)) 414 gpio_set_value_cansleep(imx6_pcie->reset_gpio, 415 imx6_pcie->gpio_active_high); 416} 417 418static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) 419{ 420 WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ && 421 imx6_pcie->drvdata->variant != IMX8MM); 422 return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14; 423} 424 425static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) 426{ 427 struct dw_pcie *pci = imx6_pcie->pci; 428 struct device *dev = pci->dev; 429 unsigned int offset; 430 int ret = 0; 431 432 switch (imx6_pcie->drvdata->variant) { 433 case IMX6SX: 434 ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi); 435 if (ret) { 436 dev_err(dev, "unable to enable pcie_axi clock\n"); 437 break; 438 } 439 440 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 441 IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0); 442 break; 443 case IMX6QP: 444 case IMX6Q: 445 /* power up core phy and enable ref clock */ 446 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, 447 IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); 448 /* 449 * the async reset input need ref clock to sync internally, 450 * when the ref clock comes after reset, internal synced 451 * reset time is too short, cannot meet the requirement. 452 * add one ~10us delay here. 453 */ 454 usleep_range(10, 100); 455 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, 456 IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); 457 break; 458 case IMX7D: 459 break; 460 case IMX8MM: 461 case IMX8MQ: 462 ret = clk_prepare_enable(imx6_pcie->pcie_aux); 463 if (ret) { 464 dev_err(dev, "unable to enable pcie_aux clock\n"); 465 break; 466 } 467 468 offset = imx6_pcie_grp_offset(imx6_pcie); 469 /* 470 * Set the over ride low and enabled 471 * make sure that REF_CLK is turned on. 472 */ 473 regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, 474 IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE, 475 0); 476 regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, 477 IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN, 478 IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN); 479 break; 480 } 481 482 return ret; 483} 484 485static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) 486{ 487 u32 val; 488 struct device *dev = imx6_pcie->pci->dev; 489 490 if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, 491 IOMUXC_GPR22, val, 492 val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, 493 PHY_PLL_LOCK_WAIT_USLEEP_MAX, 494 PHY_PLL_LOCK_WAIT_TIMEOUT)) 495 dev_err(dev, "PCIe PLL lock timeout\n"); 496} 497 498static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) 499{ 500 struct dw_pcie *pci = imx6_pcie->pci; 501 struct device *dev = pci->dev; 502 int ret; 503 504 if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { 505 ret = regulator_enable(imx6_pcie->vpcie); 506 if (ret) { 507 dev_err(dev, "failed to enable vpcie regulator: %d\n", 508 ret); 509 return; 510 } 511 } 512 513 ret = clk_prepare_enable(imx6_pcie->pcie_phy); 514 if (ret) { 515 dev_err(dev, "unable to enable pcie_phy clock\n"); 516 goto err_pcie_phy; 517 } 518 519 ret = clk_prepare_enable(imx6_pcie->pcie_bus); 520 if (ret) { 521 dev_err(dev, "unable to enable pcie_bus clock\n"); 522 goto err_pcie_bus; 523 } 524 525 ret = clk_prepare_enable(imx6_pcie->pcie); 526 if (ret) { 527 dev_err(dev, "unable to enable pcie clock\n"); 528 goto err_pcie; 529 } 530 531 ret = imx6_pcie_enable_ref_clk(imx6_pcie); 532 if (ret) { 533 dev_err(dev, "unable to enable pcie ref clock\n"); 534 goto err_ref_clk; 535 } 536 537 switch (imx6_pcie->drvdata->variant) { 538 case IMX8MM: 539 if (phy_power_on(imx6_pcie->phy)) 540 dev_err(dev, "unable to power on PHY\n"); 541 break; 542 default: 543 break; 544 } 545 /* allow the clocks to stabilize */ 546 usleep_range(200, 500); 547 548 switch (imx6_pcie->drvdata->variant) { 549 case IMX8MQ: 550 reset_control_deassert(imx6_pcie->pciephy_reset); 551 break; 552 case IMX8MM: 553 if (phy_init(imx6_pcie->phy)) 554 dev_err(dev, "waiting for phy ready timeout!\n"); 555 break; 556 case IMX7D: 557 reset_control_deassert(imx6_pcie->pciephy_reset); 558 559 /* Workaround for ERR010728, failure of PCI-e PLL VCO to 560 * oscillate, especially when cold. This turns off "Duty-cycle 561 * Corrector" and other mysterious undocumented things. 562 */ 563 if (likely(imx6_pcie->phy_base)) { 564 /* De-assert DCC_FB_EN */ 565 writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, 566 imx6_pcie->phy_base + PCIE_PHY_CMN_REG4); 567 /* Assert RX_EQS and RX_EQS_SEL */ 568 writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL 569 | PCIE_PHY_CMN_REG24_RX_EQ, 570 imx6_pcie->phy_base + PCIE_PHY_CMN_REG24); 571 /* Assert ATT_MODE */ 572 writel(PCIE_PHY_CMN_REG26_ATT_MODE, 573 imx6_pcie->phy_base + PCIE_PHY_CMN_REG26); 574 } else { 575 dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); 576 } 577 578 imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); 579 break; 580 case IMX6SX: 581 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, 582 IMX6SX_GPR5_PCIE_BTNRST_RESET, 0); 583 break; 584 case IMX6QP: 585 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, 586 IMX6Q_GPR1_PCIE_SW_RST, 0); 587 588 usleep_range(200, 500); 589 break; 590 case IMX6Q: /* Nothing to do */ 591 break; 592 } 593 594 /* Some boards don't have PCIe reset GPIO. */ 595 if (gpio_is_valid(imx6_pcie->reset_gpio)) { 596 msleep(100); 597 gpio_set_value_cansleep(imx6_pcie->reset_gpio, 598 !imx6_pcie->gpio_active_high); 599 /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */ 600 msleep(100); 601 } 602 603 return; 604 605err_ref_clk: 606 clk_disable_unprepare(imx6_pcie->pcie); 607err_pcie: 608 clk_disable_unprepare(imx6_pcie->pcie_bus); 609err_pcie_bus: 610 clk_disable_unprepare(imx6_pcie->pcie_phy); 611err_pcie_phy: 612 if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { 613 ret = regulator_disable(imx6_pcie->vpcie); 614 if (ret) 615 dev_err(dev, "failed to disable vpcie regulator: %d\n", 616 ret); 617 } 618} 619 620static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie) 621{ 622 unsigned int mask, val; 623 624 if (imx6_pcie->drvdata->variant == IMX8MQ && 625 imx6_pcie->controller_id == 1) { 626 mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE; 627 val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, 628 PCI_EXP_TYPE_ROOT_PORT); 629 } else { 630 mask = IMX6Q_GPR12_DEVICE_TYPE; 631 val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, 632 PCI_EXP_TYPE_ROOT_PORT); 633 } 634 635 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val); 636} 637 638static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) 639{ 640 switch (imx6_pcie->drvdata->variant) { 641 case IMX8MM: 642 /* 643 * The PHY initialization had been done in the PHY 644 * driver, break here directly. 645 */ 646 break; 647 case IMX8MQ: 648 /* 649 * TODO: Currently this code assumes external 650 * oscillator is being used 651 */ 652 regmap_update_bits(imx6_pcie->iomuxc_gpr, 653 imx6_pcie_grp_offset(imx6_pcie), 654 IMX8MQ_GPR_PCIE_REF_USE_PAD, 655 IMX8MQ_GPR_PCIE_REF_USE_PAD); 656 /* 657 * Regarding the datasheet, the PCIE_VPH is suggested 658 * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the 659 * VREG_BYPASS should be cleared to zero. 660 */ 661 if (imx6_pcie->vph && 662 regulator_get_voltage(imx6_pcie->vph) > 3000000) 663 regmap_update_bits(imx6_pcie->iomuxc_gpr, 664 imx6_pcie_grp_offset(imx6_pcie), 665 IMX8MQ_GPR_PCIE_VREG_BYPASS, 666 0); 667 break; 668 case IMX7D: 669 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 670 IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); 671 break; 672 case IMX6SX: 673 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 674 IMX6SX_GPR12_PCIE_RX_EQ_MASK, 675 IMX6SX_GPR12_PCIE_RX_EQ_2); 676 fallthrough; 677 default: 678 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 679 IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); 680 681 /* configure constant input signal to the pcie ctrl and phy */ 682 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 683 IMX6Q_GPR12_LOS_LEVEL, 9 << 4); 684 685 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, 686 IMX6Q_GPR8_TX_DEEMPH_GEN1, 687 imx6_pcie->tx_deemph_gen1 << 0); 688 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, 689 IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 690 imx6_pcie->tx_deemph_gen2_3p5db << 6); 691 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, 692 IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 693 imx6_pcie->tx_deemph_gen2_6db << 12); 694 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, 695 IMX6Q_GPR8_TX_SWING_FULL, 696 imx6_pcie->tx_swing_full << 18); 697 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, 698 IMX6Q_GPR8_TX_SWING_LOW, 699 imx6_pcie->tx_swing_low << 25); 700 break; 701 } 702 703 imx6_pcie_configure_type(imx6_pcie); 704} 705 706static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie) 707{ 708 unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy); 709 int mult, div; 710 u16 val; 711 712 if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY)) 713 return 0; 714 715 switch (phy_rate) { 716 case 125000000: 717 /* 718 * The default settings of the MPLL are for a 125MHz input 719 * clock, so no need to reconfigure anything in that case. 720 */ 721 return 0; 722 case 100000000: 723 mult = 25; 724 div = 0; 725 break; 726 case 200000000: 727 mult = 25; 728 div = 1; 729 break; 730 default: 731 dev_err(imx6_pcie->pci->dev, 732 "Unsupported PHY reference clock rate %lu\n", phy_rate); 733 return -EINVAL; 734 } 735 736 pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val); 737 val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK << 738 PCIE_PHY_MPLL_MULTIPLIER_SHIFT); 739 val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT; 740 val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD; 741 pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val); 742 743 pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val); 744 val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK << 745 PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT); 746 val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT; 747 val |= PCIE_PHY_ATEOVRD_EN; 748 pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val); 749 750 return 0; 751} 752 753static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie) 754{ 755 struct dw_pcie *pci = imx6_pcie->pci; 756 struct device *dev = pci->dev; 757 u32 tmp; 758 unsigned int retries; 759 760 for (retries = 0; retries < 200; retries++) { 761 tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); 762 /* Test if the speed change finished. */ 763 if (!(tmp & PORT_LOGIC_SPEED_CHANGE)) 764 return 0; 765 usleep_range(100, 1000); 766 } 767 768 dev_err(dev, "Speed change timeout\n"); 769 return -ETIMEDOUT; 770} 771 772static void imx6_pcie_ltssm_enable(struct device *dev) 773{ 774 struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); 775 776 switch (imx6_pcie->drvdata->variant) { 777 case IMX6Q: 778 case IMX6SX: 779 case IMX6QP: 780 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 781 IMX6Q_GPR12_PCIE_CTL_2, 782 IMX6Q_GPR12_PCIE_CTL_2); 783 break; 784 case IMX7D: 785 case IMX8MQ: 786 case IMX8MM: 787 reset_control_deassert(imx6_pcie->apps_reset); 788 break; 789 } 790} 791 792static int imx6_pcie_start_link(struct dw_pcie *pci) 793{ 794 struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); 795 struct device *dev = pci->dev; 796 u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); 797 u32 tmp; 798 int ret; 799 800 /* 801 * Force Gen1 operation when starting the link. In case the link is 802 * started in Gen2 mode, there is a possibility the devices on the 803 * bus will not be detected at all. This happens with PCIe switches. 804 */ 805 tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); 806 tmp &= ~PCI_EXP_LNKCAP_SLS; 807 tmp |= PCI_EXP_LNKCAP_SLS_2_5GB; 808 dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp); 809 810 /* Start LTSSM. */ 811 imx6_pcie_ltssm_enable(dev); 812 813 dw_pcie_wait_for_link(pci); 814 815 if (pci->link_gen == 2) { 816 /* Allow Gen2 mode after the link is up. */ 817 tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); 818 tmp &= ~PCI_EXP_LNKCAP_SLS; 819 tmp |= PCI_EXP_LNKCAP_SLS_5_0GB; 820 dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp); 821 822 /* 823 * Start Directed Speed Change so the best possible 824 * speed both link partners support can be negotiated. 825 */ 826 tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); 827 tmp |= PORT_LOGIC_SPEED_CHANGE; 828 dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp); 829 830 if (imx6_pcie->drvdata->flags & 831 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) { 832 /* 833 * On i.MX7, DIRECT_SPEED_CHANGE behaves differently 834 * from i.MX6 family when no link speed transition 835 * occurs and we go Gen1 -> yep, Gen1. The difference 836 * is that, in such case, it will not be cleared by HW 837 * which will cause the following code to report false 838 * failure. 839 */ 840 841 ret = imx6_pcie_wait_for_speed_change(imx6_pcie); 842 if (ret) { 843 dev_err(dev, "Failed to bring link up!\n"); 844 goto err_reset_phy; 845 } 846 } 847 848 /* Make sure link training is finished as well! */ 849 dw_pcie_wait_for_link(pci); 850 } else { 851 dev_info(dev, "Link: Gen2 disabled\n"); 852 } 853 854 tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA); 855 dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS); 856 return 0; 857 858err_reset_phy: 859 dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n", 860 dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0), 861 dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1)); 862 imx6_pcie_reset_phy(imx6_pcie); 863 return ret; 864} 865 866static int imx6_pcie_host_init(struct pcie_port *pp) 867{ 868 struct dw_pcie *pci = to_dw_pcie_from_pp(pp); 869 struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); 870 871 imx6_pcie_assert_core_reset(imx6_pcie); 872 imx6_pcie_init_phy(imx6_pcie); 873 imx6_pcie_deassert_core_reset(imx6_pcie); 874 imx6_setup_phy_mpll(imx6_pcie); 875 876 return 0; 877} 878 879static const struct dw_pcie_host_ops imx6_pcie_host_ops = { 880 .host_init = imx6_pcie_host_init, 881}; 882 883static const struct dw_pcie_ops dw_pcie_ops = { 884 .start_link = imx6_pcie_start_link, 885}; 886 887#ifdef CONFIG_PM_SLEEP 888static void imx6_pcie_ltssm_disable(struct device *dev) 889{ 890 struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); 891 892 switch (imx6_pcie->drvdata->variant) { 893 case IMX6SX: 894 case IMX6QP: 895 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 896 IMX6Q_GPR12_PCIE_CTL_2, 0); 897 break; 898 case IMX7D: 899 case IMX8MM: 900 reset_control_assert(imx6_pcie->apps_reset); 901 break; 902 default: 903 dev_err(dev, "ltssm_disable not supported\n"); 904 } 905} 906 907static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie) 908{ 909 struct device *dev = imx6_pcie->pci->dev; 910 911 /* Some variants have a turnoff reset in DT */ 912 if (imx6_pcie->turnoff_reset) { 913 reset_control_assert(imx6_pcie->turnoff_reset); 914 reset_control_deassert(imx6_pcie->turnoff_reset); 915 goto pm_turnoff_sleep; 916 } 917 918 /* Others poke directly at IOMUXC registers */ 919 switch (imx6_pcie->drvdata->variant) { 920 case IMX6SX: 921 case IMX6QP: 922 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 923 IMX6SX_GPR12_PCIE_PM_TURN_OFF, 924 IMX6SX_GPR12_PCIE_PM_TURN_OFF); 925 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 926 IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0); 927 break; 928 default: 929 dev_err(dev, "PME_Turn_Off not implemented\n"); 930 return; 931 } 932 933 /* 934 * Components with an upstream port must respond to 935 * PME_Turn_Off with PME_TO_Ack but we can't check. 936 * 937 * The standard recommends a 1-10ms timeout after which to 938 * proceed anyway as if acks were received. 939 */ 940pm_turnoff_sleep: 941 usleep_range(1000, 10000); 942} 943 944static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) 945{ 946 clk_disable_unprepare(imx6_pcie->pcie); 947 clk_disable_unprepare(imx6_pcie->pcie_phy); 948 clk_disable_unprepare(imx6_pcie->pcie_bus); 949 950 switch (imx6_pcie->drvdata->variant) { 951 case IMX6SX: 952 clk_disable_unprepare(imx6_pcie->pcie_inbound_axi); 953 break; 954 case IMX7D: 955 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, 956 IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 957 IMX7D_GPR12_PCIE_PHY_REFCLK_SEL); 958 break; 959 case IMX8MQ: 960 case IMX8MM: 961 clk_disable_unprepare(imx6_pcie->pcie_aux); 962 break; 963 default: 964 break; 965 } 966} 967 968static int imx6_pcie_suspend_noirq(struct device *dev) 969{ 970 struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); 971 972 if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND)) 973 return 0; 974 975 imx6_pcie_pm_turnoff(imx6_pcie); 976 imx6_pcie_ltssm_disable(dev); 977 imx6_pcie_clk_disable(imx6_pcie); 978 switch (imx6_pcie->drvdata->variant) { 979 case IMX8MM: 980 if (phy_power_off(imx6_pcie->phy)) 981 dev_err(dev, "unable to power off PHY\n"); 982 phy_exit(imx6_pcie->phy); 983 break; 984 default: 985 break; 986 } 987 988 return 0; 989} 990 991static int imx6_pcie_resume_noirq(struct device *dev) 992{ 993 int ret; 994 struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); 995 struct pcie_port *pp = &imx6_pcie->pci->pp; 996 997 if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND)) 998 return 0; 999 1000 imx6_pcie_assert_core_reset(imx6_pcie); 1001 imx6_pcie_init_phy(imx6_pcie); 1002 imx6_pcie_deassert_core_reset(imx6_pcie); 1003 dw_pcie_setup_rc(pp); 1004 1005 ret = imx6_pcie_start_link(imx6_pcie->pci); 1006 if (ret < 0) 1007 dev_info(dev, "pcie link is down after resume.\n"); 1008 1009 return 0; 1010} 1011#endif 1012 1013static const struct dev_pm_ops imx6_pcie_pm_ops = { 1014 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq, 1015 imx6_pcie_resume_noirq) 1016}; 1017 1018static int imx6_pcie_probe(struct platform_device *pdev) 1019{ 1020 struct device *dev = &pdev->dev; 1021 struct dw_pcie *pci; 1022 struct imx6_pcie *imx6_pcie; 1023 struct device_node *np; 1024 struct resource *dbi_base; 1025 struct device_node *node = dev->of_node; 1026 int ret; 1027 u16 val; 1028 1029 imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL); 1030 if (!imx6_pcie) 1031 return -ENOMEM; 1032 1033 pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); 1034 if (!pci) 1035 return -ENOMEM; 1036 1037 pci->dev = dev; 1038 pci->ops = &dw_pcie_ops; 1039 pci->pp.ops = &imx6_pcie_host_ops; 1040 1041 imx6_pcie->pci = pci; 1042 imx6_pcie->drvdata = of_device_get_match_data(dev); 1043 1044 /* Find the PHY if one is defined, only imx7d uses it */ 1045 np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0); 1046 if (np) { 1047 struct resource res; 1048 1049 ret = of_address_to_resource(np, 0, &res); 1050 if (ret) { 1051 dev_err(dev, "Unable to map PCIe PHY\n"); 1052 return ret; 1053 } 1054 imx6_pcie->phy_base = devm_ioremap_resource(dev, &res); 1055 if (IS_ERR(imx6_pcie->phy_base)) 1056 return PTR_ERR(imx6_pcie->phy_base); 1057 } 1058 1059 dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1060 pci->dbi_base = devm_ioremap_resource(dev, dbi_base); 1061 if (IS_ERR(pci->dbi_base)) 1062 return PTR_ERR(pci->dbi_base); 1063 1064 /* Fetch GPIOs */ 1065 imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0); 1066 imx6_pcie->gpio_active_high = of_property_read_bool(node, 1067 "reset-gpio-active-high"); 1068 if (gpio_is_valid(imx6_pcie->reset_gpio)) { 1069 ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, 1070 imx6_pcie->gpio_active_high ? 1071 GPIOF_OUT_INIT_HIGH : 1072 GPIOF_OUT_INIT_LOW, 1073 "PCIe reset"); 1074 if (ret) { 1075 dev_err(dev, "unable to get reset gpio\n"); 1076 return ret; 1077 } 1078 } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { 1079 return imx6_pcie->reset_gpio; 1080 } 1081 1082 /* Fetch clocks */ 1083 imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus"); 1084 if (IS_ERR(imx6_pcie->pcie_bus)) 1085 return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_bus), 1086 "pcie_bus clock source missing or invalid\n"); 1087 1088 imx6_pcie->pcie = devm_clk_get(dev, "pcie"); 1089 if (IS_ERR(imx6_pcie->pcie)) 1090 return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie), 1091 "pcie clock source missing or invalid\n"); 1092 1093 switch (imx6_pcie->drvdata->variant) { 1094 case IMX6SX: 1095 imx6_pcie->pcie_inbound_axi = devm_clk_get(dev, 1096 "pcie_inbound_axi"); 1097 if (IS_ERR(imx6_pcie->pcie_inbound_axi)) 1098 return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi), 1099 "pcie_inbound_axi clock missing or invalid\n"); 1100 break; 1101 case IMX8MQ: 1102 imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux"); 1103 if (IS_ERR(imx6_pcie->pcie_aux)) 1104 return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux), 1105 "pcie_aux clock source missing or invalid\n"); 1106 fallthrough; 1107 case IMX7D: 1108 if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) 1109 imx6_pcie->controller_id = 1; 1110 1111 imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, 1112 "pciephy"); 1113 if (IS_ERR(imx6_pcie->pciephy_reset)) { 1114 dev_err(dev, "Failed to get PCIEPHY reset control\n"); 1115 return PTR_ERR(imx6_pcie->pciephy_reset); 1116 } 1117 1118 imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev, 1119 "apps"); 1120 if (IS_ERR(imx6_pcie->apps_reset)) { 1121 dev_err(dev, "Failed to get PCIE APPS reset control\n"); 1122 return PTR_ERR(imx6_pcie->apps_reset); 1123 } 1124 break; 1125 case IMX8MM: 1126 imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux"); 1127 if (IS_ERR(imx6_pcie->pcie_aux)) 1128 return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux), 1129 "pcie_aux clock source missing or invalid\n"); 1130 imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev, 1131 "apps"); 1132 if (IS_ERR(imx6_pcie->apps_reset)) 1133 return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset), 1134 "failed to get pcie apps reset control\n"); 1135 1136 imx6_pcie->phy = devm_phy_get(dev, "pcie-phy"); 1137 if (IS_ERR(imx6_pcie->phy)) 1138 return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy), 1139 "failed to get pcie phy\n"); 1140 1141 break; 1142 default: 1143 break; 1144 } 1145 /* Don't fetch the pcie_phy clock, if it has abstract PHY driver */ 1146 if (imx6_pcie->phy == NULL) { 1147 imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy"); 1148 if (IS_ERR(imx6_pcie->pcie_phy)) 1149 return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy), 1150 "pcie_phy clock source missing or invalid\n"); 1151 } 1152 1153 1154 /* Grab turnoff reset */ 1155 imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff"); 1156 if (IS_ERR(imx6_pcie->turnoff_reset)) { 1157 dev_err(dev, "Failed to get TURNOFF reset control\n"); 1158 return PTR_ERR(imx6_pcie->turnoff_reset); 1159 } 1160 1161 /* Grab GPR config register range */ 1162 imx6_pcie->iomuxc_gpr = 1163 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); 1164 if (IS_ERR(imx6_pcie->iomuxc_gpr)) { 1165 dev_err(dev, "unable to find iomuxc registers\n"); 1166 return PTR_ERR(imx6_pcie->iomuxc_gpr); 1167 } 1168 1169 /* Grab PCIe PHY Tx Settings */ 1170 if (of_property_read_u32(node, "fsl,tx-deemph-gen1", 1171 &imx6_pcie->tx_deemph_gen1)) 1172 imx6_pcie->tx_deemph_gen1 = 0; 1173 1174 if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db", 1175 &imx6_pcie->tx_deemph_gen2_3p5db)) 1176 imx6_pcie->tx_deemph_gen2_3p5db = 0; 1177 1178 if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db", 1179 &imx6_pcie->tx_deemph_gen2_6db)) 1180 imx6_pcie->tx_deemph_gen2_6db = 20; 1181 1182 if (of_property_read_u32(node, "fsl,tx-swing-full", 1183 &imx6_pcie->tx_swing_full)) 1184 imx6_pcie->tx_swing_full = 127; 1185 1186 if (of_property_read_u32(node, "fsl,tx-swing-low", 1187 &imx6_pcie->tx_swing_low)) 1188 imx6_pcie->tx_swing_low = 127; 1189 1190 /* Limit link speed */ 1191 pci->link_gen = 1; 1192 of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen); 1193 1194 imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie"); 1195 if (IS_ERR(imx6_pcie->vpcie)) { 1196 if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV) 1197 return PTR_ERR(imx6_pcie->vpcie); 1198 imx6_pcie->vpcie = NULL; 1199 } 1200 1201 imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph"); 1202 if (IS_ERR(imx6_pcie->vph)) { 1203 if (PTR_ERR(imx6_pcie->vph) != -ENODEV) 1204 return PTR_ERR(imx6_pcie->vph); 1205 imx6_pcie->vph = NULL; 1206 } 1207 1208 platform_set_drvdata(pdev, imx6_pcie); 1209 1210 ret = imx6_pcie_attach_pd(dev); 1211 if (ret) 1212 return ret; 1213 1214 ret = dw_pcie_host_init(&pci->pp); 1215 if (ret < 0) 1216 return ret; 1217 1218 if (pci_msi_enabled()) { 1219 u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI); 1220 val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS); 1221 val |= PCI_MSI_FLAGS_ENABLE; 1222 dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val); 1223 } 1224 1225 return 0; 1226} 1227 1228static void imx6_pcie_shutdown(struct platform_device *pdev) 1229{ 1230 struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev); 1231 1232 /* bring down link, so bootloader gets clean state in case of reboot */ 1233 imx6_pcie_assert_core_reset(imx6_pcie); 1234} 1235 1236static const struct imx6_pcie_drvdata drvdata[] = { 1237 [IMX6Q] = { 1238 .variant = IMX6Q, 1239 .flags = IMX6_PCIE_FLAG_IMX6_PHY | 1240 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE, 1241 .dbi_length = 0x200, 1242 }, 1243 [IMX6SX] = { 1244 .variant = IMX6SX, 1245 .flags = IMX6_PCIE_FLAG_IMX6_PHY | 1246 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE | 1247 IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, 1248 }, 1249 [IMX6QP] = { 1250 .variant = IMX6QP, 1251 .flags = IMX6_PCIE_FLAG_IMX6_PHY | 1252 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE | 1253 IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, 1254 .dbi_length = 0x200, 1255 }, 1256 [IMX7D] = { 1257 .variant = IMX7D, 1258 .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, 1259 }, 1260 [IMX8MQ] = { 1261 .variant = IMX8MQ, 1262 }, 1263 [IMX8MM] = { 1264 .variant = IMX8MM, 1265 .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, 1266 }, 1267}; 1268 1269static const struct of_device_id imx6_pcie_of_match[] = { 1270 { .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], }, 1271 { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], }, 1272 { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], }, 1273 { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], }, 1274 { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], }, 1275 { .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], }, 1276 {}, 1277}; 1278 1279static struct platform_driver imx6_pcie_driver = { 1280 .driver = { 1281 .name = "imx6q-pcie", 1282 .of_match_table = imx6_pcie_of_match, 1283 .suppress_bind_attrs = true, 1284 .pm = &imx6_pcie_pm_ops, 1285 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 1286 }, 1287 .probe = imx6_pcie_probe, 1288 .shutdown = imx6_pcie_shutdown, 1289}; 1290 1291static void imx6_pcie_quirk(struct pci_dev *dev) 1292{ 1293 struct pci_bus *bus = dev->bus; 1294 struct pcie_port *pp = bus->sysdata; 1295 1296 /* Bus parent is the PCI bridge, its parent is this platform driver */ 1297 if (!bus->dev.parent || !bus->dev.parent->parent) 1298 return; 1299 1300 /* Make sure we only quirk devices associated with this driver */ 1301 if (bus->dev.parent->parent->driver != &imx6_pcie_driver.driver) 1302 return; 1303 1304 if (pci_is_root_bus(bus)) { 1305 struct dw_pcie *pci = to_dw_pcie_from_pp(pp); 1306 struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); 1307 1308 /* 1309 * Limit config length to avoid the kernel reading beyond 1310 * the register set and causing an abort on i.MX 6Quad 1311 */ 1312 if (imx6_pcie->drvdata->dbi_length) { 1313 dev->cfg_size = imx6_pcie->drvdata->dbi_length; 1314 dev_info(&dev->dev, "Limiting cfg_size to %d\n", 1315 dev->cfg_size); 1316 } 1317 } 1318} 1319DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd, 1320 PCI_CLASS_BRIDGE_PCI, 8, imx6_pcie_quirk); 1321 1322static int __init imx6_pcie_init(void) 1323{ 1324#ifdef CONFIG_ARM 1325 /* 1326 * Since probe() can be deferred we need to make sure that 1327 * hook_fault_code is not called after __init memory is freed 1328 * by kernel and since imx6q_pcie_abort_handler() is a no-op, 1329 * we can install the handler here without risking it 1330 * accessing some uninitialized driver state. 1331 */ 1332 hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0, 1333 "external abort on non-linefetch"); 1334#endif 1335 1336 return platform_driver_register(&imx6_pcie_driver); 1337} 1338device_initcall(imx6_pcie_init);