sa1111_jornada720.c (3110B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * drivers/pcmcia/sa1100_jornada720.c 4 * 5 * Jornada720 PCMCIA specific routines 6 * 7 */ 8#include <linux/module.h> 9#include <linux/device.h> 10#include <linux/errno.h> 11#include <linux/gpio/consumer.h> 12#include <linux/init.h> 13#include <linux/io.h> 14 15#include <mach/hardware.h> 16#include <asm/mach-types.h> 17 18#include "sa1111_generic.h" 19 20/* 21 * Socket 0 power: GPIO A0 22 * Socket 0 3V: GPIO A2 23 * Socket 1 power: GPIO A1 & GPIO A3 24 * Socket 1 3V: GPIO A3 25 * Does Socket 1 3V actually do anything? 26 */ 27enum { 28 J720_GPIO_PWR, 29 J720_GPIO_3V, 30 J720_GPIO_MAX, 31}; 32struct jornada720_data { 33 struct gpio_desc *gpio[J720_GPIO_MAX]; 34}; 35 36static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt) 37{ 38 struct device *dev = skt->socket.dev.parent; 39 struct jornada720_data *j; 40 41 j = devm_kzalloc(dev, sizeof(*j), GFP_KERNEL); 42 if (!j) 43 return -ENOMEM; 44 45 j->gpio[J720_GPIO_PWR] = devm_gpiod_get(dev, skt->nr ? "s1-power" : 46 "s0-power", GPIOD_OUT_LOW); 47 if (IS_ERR(j->gpio[J720_GPIO_PWR])) 48 return PTR_ERR(j->gpio[J720_GPIO_PWR]); 49 50 j->gpio[J720_GPIO_3V] = devm_gpiod_get(dev, skt->nr ? "s1-3v" : 51 "s0-3v", GPIOD_OUT_LOW); 52 if (IS_ERR(j->gpio[J720_GPIO_3V])) 53 return PTR_ERR(j->gpio[J720_GPIO_3V]); 54 55 skt->driver_data = j; 56 57 return 0; 58} 59 60static int 61jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) 62{ 63 struct jornada720_data *j = skt->driver_data; 64 DECLARE_BITMAP(values, J720_GPIO_MAX) = { 0, }; 65 int ret; 66 67 printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, 68 skt->nr, state->Vcc, state->Vpp); 69 70 switch (skt->nr) { 71 case 0: 72 switch (state->Vcc) { 73 default: 74 case 0: 75 __assign_bit(J720_GPIO_PWR, values, 0); 76 __assign_bit(J720_GPIO_3V, values, 0); 77 break; 78 case 33: 79 __assign_bit(J720_GPIO_PWR, values, 1); 80 __assign_bit(J720_GPIO_3V, values, 1); 81 break; 82 case 50: 83 __assign_bit(J720_GPIO_PWR, values, 1); 84 __assign_bit(J720_GPIO_3V, values, 0); 85 break; 86 } 87 break; 88 89 case 1: 90 switch (state->Vcc) { 91 default: 92 case 0: 93 __assign_bit(J720_GPIO_PWR, values, 0); 94 __assign_bit(J720_GPIO_3V, values, 0); 95 break; 96 case 33: 97 case 50: 98 __assign_bit(J720_GPIO_PWR, values, 1); 99 __assign_bit(J720_GPIO_3V, values, 1); 100 break; 101 } 102 break; 103 104 default: 105 return -1; 106 } 107 108 if (state->Vpp != state->Vcc && state->Vpp != 0) { 109 printk(KERN_ERR "%s(): slot cannot support VPP %u\n", 110 __func__, state->Vpp); 111 return -EPERM; 112 } 113 114 ret = sa1111_pcmcia_configure_socket(skt, state); 115 if (ret == 0) 116 ret = gpiod_set_array_value_cansleep(J720_GPIO_MAX, j->gpio, 117 NULL, values); 118 119 return ret; 120} 121 122static struct pcmcia_low_level jornada720_pcmcia_ops = { 123 .owner = THIS_MODULE, 124 .hw_init = jornada720_pcmcia_hw_init, 125 .configure_socket = jornada720_pcmcia_configure_socket, 126 .first = 0, 127 .nr = 2, 128}; 129 130int pcmcia_jornada720_init(struct sa1111_dev *sadev) 131{ 132 /* Fixme: why messing around with SA11x0's GPIO1? */ 133 GRER |= 0x00000002; 134 135 sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); 136 return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops, 137 sa11xx_drv_pcmcia_add_one); 138}