pinctrl-mvebu.h (6828B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Marvell MVEBU pinctrl driver 4 * 5 * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> 6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 7 */ 8 9#ifndef __PINCTRL_MVEBU_H__ 10#define __PINCTRL_MVEBU_H__ 11 12/** 13 * struct mvebu_mpp_ctrl_data - private data for the mpp ctrl operations 14 * @base: base address of pinctrl hardware 15 * @regmap.map: regmap structure 16 * @regmap.offset: regmap offset 17 */ 18struct mvebu_mpp_ctrl_data { 19 union { 20 void __iomem *base; 21 struct { 22 struct regmap *map; 23 u32 offset; 24 } regmap; 25 }; 26}; 27 28/** 29 * struct mvebu_mpp_ctrl - describe a mpp control 30 * @name: name of the control group 31 * @pid: first pin id handled by this control 32 * @npins: number of pins controlled by this control 33 * @mpp_get: (optional) special function to get mpp setting 34 * @mpp_set: (optional) special function to set mpp setting 35 * @mpp_gpio_req: (optional) special function to request gpio 36 * @mpp_gpio_dir: (optional) special function to set gpio direction 37 * 38 * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or 39 * internal function, inside the SoC. Each muxable unit can be switched 40 * between two or more different settings, e.g. assign mpp pin 13 to 41 * uart1 or sata. 42 * 43 * The mpp_get/_set functions are mandatory and are used to get/set a 44 * specific mode. The optional mpp_gpio_req/_dir functions can be used 45 * to allow pin settings with varying gpio pins. 46 */ 47struct mvebu_mpp_ctrl { 48 const char *name; 49 u8 pid; 50 u8 npins; 51 unsigned *pins; 52 int (*mpp_get)(struct mvebu_mpp_ctrl_data *data, unsigned pid, 53 unsigned long *config); 54 int (*mpp_set)(struct mvebu_mpp_ctrl_data *data, unsigned pid, 55 unsigned long config); 56 int (*mpp_gpio_req)(struct mvebu_mpp_ctrl_data *data, unsigned pid); 57 int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl_data *data, unsigned pid, 58 bool input); 59}; 60 61/** 62 * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting 63 * @val: ctrl setting value 64 * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode 65 * @subname: (optional) additional ctrl setting name, e.g. rts, cts 66 * @variant: (optional) variant identifier mask 67 * @flags: (private) flags to store gpi/gpo/gpio capabilities 68 * 69 * A ctrl_setting describes a specific internal mux function that a mpp pin 70 * can be switched to. The value (val) will be written in the corresponding 71 * register for common mpp pin configuration registers on MVEBU. SoC specific 72 * mpp_get/_set function may use val to distinguish between different settings. 73 * 74 * The name will be used to switch to this setting in DT description, e.g. 75 * marvell,function = "uart2". subname is only for debugging purposes. 76 * 77 * If name is one of "gpi", "gpo", "gpio" gpio capabilities are 78 * parsed during initialization and stored in flags. 79 * 80 * The variant can be used to combine different revisions of one SoC to a 81 * common pinctrl driver. It is matched (AND) with variant of soc_info to 82 * determine if a setting is available on the current SoC revision. 83 */ 84struct mvebu_mpp_ctrl_setting { 85 u8 val; 86 const char *name; 87 const char *subname; 88 u8 variant; 89 u8 flags; 90#define MVEBU_SETTING_GPO (1 << 0) 91#define MVEBU_SETTING_GPI (1 << 1) 92}; 93 94/** 95 * struct mvebu_mpp_mode - link ctrl and settings 96 * @pid: first pin id handled by this mode 97 * @settings: list of settings available for this mode 98 * 99 * A mode connects all available settings with the corresponding mpp_ctrl 100 * given by pid. 101 */ 102struct mvebu_mpp_mode { 103 u8 pid; 104 struct mvebu_mpp_ctrl_setting *settings; 105}; 106 107/** 108 * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu 109 * @variant: variant mask of soc_info 110 * @controls: list of available mvebu_mpp_ctrls 111 * @control_data: optional array, one entry for each control 112 * @ncontrols: number of available mvebu_mpp_ctrls 113 * @modes: list of available mvebu_mpp_modes 114 * @nmodes: number of available mvebu_mpp_modes 115 * @gpioranges: list of pinctrl_gpio_ranges 116 * @ngpioranges: number of available pinctrl_gpio_ranges 117 * 118 * This struct describes all pinctrl related information for a specific SoC. 119 * If variant is unequal 0 it will be matched (AND) with variant of each 120 * setting and allows to distinguish between different revisions of one SoC. 121 */ 122struct mvebu_pinctrl_soc_info { 123 u8 variant; 124 const struct mvebu_mpp_ctrl *controls; 125 struct mvebu_mpp_ctrl_data *control_data; 126 int ncontrols; 127 struct mvebu_mpp_mode *modes; 128 int nmodes; 129 struct pinctrl_gpio_range *gpioranges; 130 int ngpioranges; 131}; 132 133#define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \ 134 { \ 135 .name = _name, \ 136 .pid = _idl, \ 137 .npins = _idh - _idl + 1, \ 138 .pins = (unsigned[_idh - _idl + 1]) { }, \ 139 .mpp_get = _func ## _get, \ 140 .mpp_set = _func ## _set, \ 141 .mpp_gpio_req = NULL, \ 142 .mpp_gpio_dir = NULL, \ 143 } 144 145#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func) \ 146 { \ 147 .name = _name, \ 148 .pid = _idl, \ 149 .npins = _idh - _idl + 1, \ 150 .pins = (unsigned[_idh - _idl + 1]) { }, \ 151 .mpp_get = _func ## _get, \ 152 .mpp_set = _func ## _set, \ 153 .mpp_gpio_req = _func ## _gpio_req, \ 154 .mpp_gpio_dir = _func ## _gpio_dir, \ 155 } 156 157#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ 158 { \ 159 .val = _val, \ 160 .name = _name, \ 161 .subname = _subname, \ 162 .variant = _mask, \ 163 .flags = 0, \ 164 } 165 166#if defined(CONFIG_DEBUG_FS) 167#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ 168 _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) 169#else 170#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ 171 _MPP_VAR_FUNCTION(_val, _name, NULL, _mask) 172#endif 173 174#define MPP_FUNCTION(_val, _name, _subname) \ 175 MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1) 176 177#define MPP_MODE(_id, ...) \ 178 { \ 179 .pid = _id, \ 180 .settings = (struct mvebu_mpp_ctrl_setting[]){ \ 181 __VA_ARGS__, { } }, \ 182 } 183 184#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \ 185 { \ 186 .name = "mvebu-gpio", \ 187 .id = _id, \ 188 .pin_base = _pinbase, \ 189 .base = _gpiobase, \ 190 .npins = _npins, \ 191 } 192 193#define MVEBU_MPPS_PER_REG 8 194#define MVEBU_MPP_BITS 4 195#define MVEBU_MPP_MASK 0xf 196 197int mvebu_mmio_mpp_ctrl_get(struct mvebu_mpp_ctrl_data *data, unsigned pid, 198 unsigned long *config); 199int mvebu_mmio_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid, 200 unsigned long config); 201int mvebu_regmap_mpp_ctrl_get(struct mvebu_mpp_ctrl_data *data, unsigned pid, 202 unsigned long *config); 203int mvebu_regmap_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid, 204 unsigned long config); 205 206int mvebu_pinctrl_probe(struct platform_device *pdev); 207int mvebu_pinctrl_simple_mmio_probe(struct platform_device *pdev); 208int mvebu_pinctrl_simple_regmap_probe(struct platform_device *pdev, 209 struct device *syscon_dev, u32 offset); 210 211#endif