cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sbs-manager.c (10364B)


      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * Driver for SBS compliant Smart Battery System Managers
      4 *
      5 * The device communicates via i2c at address 0x0a and multiplexes access to up
      6 * to four smart batteries at address 0x0b.
      7 *
      8 * Via sysfs interface the online state and charge type are presented.
      9 *
     10 * Datasheet SBSM:    http://sbs-forum.org/specs/sbsm100b.pdf
     11 * Datasheet LTC1760: http://cds.linear.com/docs/en/datasheet/1760fb.pdf
     12 *
     13 * Karl-Heinz Schneider <karl-heinz@schneider-inet.de>
     14 */
     15
     16#include <linux/gpio/driver.h>
     17#include <linux/module.h>
     18#include <linux/i2c.h>
     19#include <linux/i2c-mux.h>
     20#include <linux/power_supply.h>
     21#include <linux/property.h>
     22
     23#define SBSM_MAX_BATS  4
     24#define SBSM_RETRY_CNT 3
     25
     26/* registers addresses */
     27#define SBSM_CMD_BATSYSSTATE     0x01
     28#define SBSM_CMD_BATSYSSTATECONT 0x02
     29#define SBSM_CMD_BATSYSINFO      0x04
     30#define SBSM_CMD_LTC             0x3c
     31
     32#define SBSM_MASK_BAT_SUPPORTED  GENMASK(3, 0)
     33#define SBSM_MASK_CHARGE_BAT     GENMASK(7, 4)
     34#define SBSM_BIT_AC_PRESENT      BIT(0)
     35#define SBSM_BIT_TURBO           BIT(7)
     36
     37#define SBSM_SMB_BAT_OFFSET      11
     38struct sbsm_data {
     39	struct i2c_client *client;
     40	struct i2c_mux_core *muxc;
     41
     42	struct power_supply *psy;
     43
     44	u8 cur_chan;          /* currently selected channel */
     45	struct gpio_chip chip;
     46	bool is_ltc1760;      /* special capabilities */
     47
     48	unsigned int supported_bats;
     49	unsigned int last_state;
     50	unsigned int last_state_cont;
     51};
     52
     53static enum power_supply_property sbsm_props[] = {
     54	POWER_SUPPLY_PROP_ONLINE,
     55	POWER_SUPPLY_PROP_CHARGE_TYPE,
     56};
     57
     58static int sbsm_read_word(struct i2c_client *client, u8 address)
     59{
     60	int reg, retries;
     61
     62	for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
     63		reg = i2c_smbus_read_word_data(client, address);
     64		if (reg >= 0)
     65			break;
     66	}
     67
     68	if (reg < 0) {
     69		dev_err(&client->dev, "failed to read register 0x%02x\n",
     70			address);
     71	}
     72
     73	return reg;
     74}
     75
     76static int sbsm_write_word(struct i2c_client *client, u8 address, u16 word)
     77{
     78	int ret, retries;
     79
     80	for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
     81		ret = i2c_smbus_write_word_data(client, address, word);
     82		if (ret >= 0)
     83			break;
     84	}
     85	if (ret < 0)
     86		dev_err(&client->dev, "failed to write to register 0x%02x\n",
     87			address);
     88
     89	return ret;
     90}
     91
     92static int sbsm_get_property(struct power_supply *psy,
     93			     enum power_supply_property psp,
     94			     union power_supply_propval *val)
     95{
     96	struct sbsm_data *data = power_supply_get_drvdata(psy);
     97	int regval = 0;
     98
     99	switch (psp) {
    100	case POWER_SUPPLY_PROP_ONLINE:
    101		regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATECONT);
    102		if (regval < 0)
    103			return regval;
    104		val->intval = !!(regval & SBSM_BIT_AC_PRESENT);
    105		break;
    106
    107	case POWER_SUPPLY_PROP_CHARGE_TYPE:
    108		regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
    109		if (regval < 0)
    110			return regval;
    111
    112		if ((regval & SBSM_MASK_CHARGE_BAT) == 0) {
    113			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
    114			return 0;
    115		}
    116		val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
    117
    118		if (data->is_ltc1760) {
    119			/* charge mode fast if turbo is active */
    120			regval = sbsm_read_word(data->client, SBSM_CMD_LTC);
    121			if (regval < 0)
    122				return regval;
    123			else if (regval & SBSM_BIT_TURBO)
    124				val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
    125		}
    126		break;
    127
    128	default:
    129		return -EINVAL;
    130	}
    131
    132	return 0;
    133}
    134
    135static int sbsm_prop_is_writeable(struct power_supply *psy,
    136				  enum power_supply_property psp)
    137{
    138	struct sbsm_data *data = power_supply_get_drvdata(psy);
    139
    140	return (psp == POWER_SUPPLY_PROP_CHARGE_TYPE) && data->is_ltc1760;
    141}
    142
    143static int sbsm_set_property(struct power_supply *psy,
    144			     enum power_supply_property psp,
    145			     const union power_supply_propval *val)
    146{
    147	struct sbsm_data *data = power_supply_get_drvdata(psy);
    148	int ret = -EINVAL;
    149	u16 regval;
    150
    151	switch (psp) {
    152	case POWER_SUPPLY_PROP_CHARGE_TYPE:
    153		/* write 1 to TURBO if type fast is given */
    154		if (!data->is_ltc1760)
    155			break;
    156		regval = val->intval ==
    157			 POWER_SUPPLY_CHARGE_TYPE_FAST ? SBSM_BIT_TURBO : 0;
    158		ret = sbsm_write_word(data->client, SBSM_CMD_LTC, regval);
    159		break;
    160
    161	default:
    162		break;
    163	}
    164
    165	return ret;
    166}
    167
    168/*
    169 * Switch to battery
    170 * Parameter chan is directly the content of SMB_BAT* nibble
    171 */
    172static int sbsm_select(struct i2c_mux_core *muxc, u32 chan)
    173{
    174	struct sbsm_data *data = i2c_mux_priv(muxc);
    175	struct device *dev = &data->client->dev;
    176	int ret = 0;
    177	u16 reg;
    178
    179	if (data->cur_chan == chan)
    180		return ret;
    181
    182	/* chan goes from 1 ... 4 */
    183	reg = BIT(SBSM_SMB_BAT_OFFSET + chan);
    184	ret = sbsm_write_word(data->client, SBSM_CMD_BATSYSSTATE, reg);
    185	if (ret)
    186		dev_err(dev, "Failed to select channel %i\n", chan);
    187	else
    188		data->cur_chan = chan;
    189
    190	return ret;
    191}
    192
    193static int sbsm_gpio_get_value(struct gpio_chip *gc, unsigned int off)
    194{
    195	struct sbsm_data *data = gpiochip_get_data(gc);
    196	int ret;
    197
    198	ret = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
    199	if (ret < 0)
    200		return ret;
    201
    202	return ret & BIT(off);
    203}
    204
    205/*
    206 * This needs to be defined or the GPIO lib fails to register the pin.
    207 * But the 'gpio' is always an input.
    208 */
    209static int sbsm_gpio_direction_input(struct gpio_chip *gc, unsigned int off)
    210{
    211	return 0;
    212}
    213
    214static int sbsm_do_alert(struct device *dev, void *d)
    215{
    216	struct i2c_client *client = i2c_verify_client(dev);
    217	struct i2c_driver *driver;
    218
    219	if (!client || client->addr != 0x0b)
    220		return 0;
    221
    222	device_lock(dev);
    223	if (client->dev.driver) {
    224		driver = to_i2c_driver(client->dev.driver);
    225		if (driver->alert)
    226			driver->alert(client, I2C_PROTOCOL_SMBUS_ALERT, 0);
    227		else
    228			dev_warn(&client->dev, "no driver alert()!\n");
    229	} else {
    230		dev_dbg(&client->dev, "alert with no driver\n");
    231	}
    232	device_unlock(dev);
    233
    234	return -EBUSY;
    235}
    236
    237static void sbsm_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
    238		       unsigned int d)
    239{
    240	struct sbsm_data *sbsm = i2c_get_clientdata(client);
    241
    242	int ret, i, irq_bat = 0, state = 0;
    243
    244	ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATE);
    245	if (ret >= 0) {
    246		irq_bat = ret ^ sbsm->last_state;
    247		sbsm->last_state = ret;
    248		state = ret;
    249	}
    250
    251	ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATECONT);
    252	if ((ret >= 0) &&
    253	    ((ret ^ sbsm->last_state_cont) & SBSM_BIT_AC_PRESENT)) {
    254		irq_bat |= sbsm->supported_bats & state;
    255		power_supply_changed(sbsm->psy);
    256	}
    257	sbsm->last_state_cont = ret;
    258
    259	for (i = 0; i < SBSM_MAX_BATS; i++) {
    260		if (irq_bat & BIT(i)) {
    261			device_for_each_child(&sbsm->muxc->adapter[i]->dev,
    262					      NULL, sbsm_do_alert);
    263		}
    264	}
    265}
    266
    267static int sbsm_gpio_setup(struct sbsm_data *data)
    268{
    269	struct gpio_chip *gc = &data->chip;
    270	struct i2c_client *client = data->client;
    271	struct device *dev = &client->dev;
    272	int ret;
    273
    274	if (!device_property_present(dev, "gpio-controller"))
    275		return 0;
    276
    277	ret  = sbsm_read_word(client, SBSM_CMD_BATSYSSTATE);
    278	if (ret < 0)
    279		return ret;
    280	data->last_state = ret;
    281
    282	ret  = sbsm_read_word(client, SBSM_CMD_BATSYSSTATECONT);
    283	if (ret < 0)
    284		return ret;
    285	data->last_state_cont = ret;
    286
    287	gc->get = sbsm_gpio_get_value;
    288	gc->direction_input  = sbsm_gpio_direction_input;
    289	gc->can_sleep = true;
    290	gc->base = -1;
    291	gc->ngpio = SBSM_MAX_BATS;
    292	gc->label = client->name;
    293	gc->parent = dev;
    294	gc->owner = THIS_MODULE;
    295
    296	ret = devm_gpiochip_add_data(dev, gc, data);
    297	if (ret)
    298		return dev_err_probe(dev, ret, "devm_gpiochip_add_data failed\n");
    299
    300	return ret;
    301}
    302
    303static const struct power_supply_desc sbsm_default_psy_desc = {
    304	.type = POWER_SUPPLY_TYPE_MAINS,
    305	.properties = sbsm_props,
    306	.num_properties = ARRAY_SIZE(sbsm_props),
    307	.get_property = &sbsm_get_property,
    308	.set_property = &sbsm_set_property,
    309	.property_is_writeable = &sbsm_prop_is_writeable,
    310};
    311
    312static void sbsm_del_mux_adapter(void *data)
    313{
    314	struct sbsm_data *sbsm = data;
    315	i2c_mux_del_adapters(sbsm->muxc);
    316}
    317
    318static int sbsm_probe(struct i2c_client *client,
    319		      const struct i2c_device_id *id)
    320{
    321	struct i2c_adapter *adapter = client->adapter;
    322	struct sbsm_data *data;
    323	struct device *dev = &client->dev;
    324	struct power_supply_desc *psy_desc;
    325	struct power_supply_config psy_cfg = {};
    326	int ret = 0, i;
    327
    328	/* Device listens only at address 0x0a */
    329	if (client->addr != 0x0a)
    330		return -EINVAL;
    331
    332	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
    333		return -EPFNOSUPPORT;
    334
    335	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
    336	if (!data)
    337		return -ENOMEM;
    338
    339	i2c_set_clientdata(client, data);
    340
    341	data->client = client;
    342	data->is_ltc1760 = !!strstr(id->name, "ltc1760");
    343
    344	ret  = sbsm_read_word(client, SBSM_CMD_BATSYSINFO);
    345	if (ret < 0)
    346		return ret;
    347	data->supported_bats = ret & SBSM_MASK_BAT_SUPPORTED;
    348	data->muxc = i2c_mux_alloc(adapter, dev, SBSM_MAX_BATS, 0,
    349				   I2C_MUX_LOCKED, &sbsm_select, NULL);
    350	if (!data->muxc)
    351		return dev_err_probe(dev, -ENOMEM, "failed to alloc i2c mux\n");
    352	data->muxc->priv = data;
    353
    354	ret = devm_add_action_or_reset(dev, sbsm_del_mux_adapter, data);
    355	if (ret)
    356		return ret;
    357
    358	/* register muxed i2c channels. One for each supported battery */
    359	for (i = 0; i < SBSM_MAX_BATS; ++i) {
    360		if (data->supported_bats & BIT(i)) {
    361			ret = i2c_mux_add_adapter(data->muxc, 0, i + 1, 0);
    362			if (ret)
    363				break;
    364		}
    365	}
    366	if (ret)
    367		return dev_err_probe(dev, ret, "failed to register i2c mux channel %d\n", i + 1);
    368
    369	psy_desc = devm_kmemdup(dev, &sbsm_default_psy_desc, sizeof(*psy_desc), GFP_KERNEL);
    370	if (!psy_desc)
    371		return -ENOMEM;
    372
    373	psy_desc->name = devm_kasprintf(dev, GFP_KERNEL, "sbsm-%s", dev_name(&client->dev));
    374	if (!psy_desc->name)
    375		return -ENOMEM;
    376
    377	ret = sbsm_gpio_setup(data);
    378	if (ret < 0)
    379		return ret;
    380
    381	psy_cfg.drv_data = data;
    382	psy_cfg.of_node = dev->of_node;
    383	data->psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
    384	if (IS_ERR(data->psy))
    385		return dev_err_probe(dev, PTR_ERR(data->psy),
    386				     "failed to register power supply %s\n", psy_desc->name);
    387
    388	return 0;
    389}
    390
    391static const struct i2c_device_id sbsm_ids[] = {
    392	{ "sbs-manager", 0 },
    393	{ "ltc1760",     0 },
    394	{ }
    395};
    396MODULE_DEVICE_TABLE(i2c, sbsm_ids);
    397
    398#ifdef CONFIG_OF
    399static const struct of_device_id sbsm_dt_ids[] = {
    400	{ .compatible = "sbs,sbs-manager" },
    401	{ .compatible = "lltc,ltc1760" },
    402	{ }
    403};
    404MODULE_DEVICE_TABLE(of, sbsm_dt_ids);
    405#endif
    406
    407static struct i2c_driver sbsm_driver = {
    408	.driver = {
    409		.name = "sbsm",
    410		.of_match_table = of_match_ptr(sbsm_dt_ids),
    411	},
    412	.probe		= sbsm_probe,
    413	.alert		= sbsm_alert,
    414	.id_table	= sbsm_ids
    415};
    416module_i2c_driver(sbsm_driver);
    417
    418MODULE_LICENSE("GPL");
    419MODULE_AUTHOR("Karl-Heinz Schneider <karl-heinz@schneider-inet.de>");
    420MODULE_DESCRIPTION("SBSM Smart Battery System Manager");