cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

Kconfig (6193B)


      1# SPDX-License-Identifier: GPL-2.0-only
      2#
      3# PTP clock support configuration
      4#
      5
      6menu "PTP clock support"
      7
      8config PTP_1588_CLOCK
      9	tristate "PTP clock support"
     10	depends on NET && POSIX_TIMERS
     11	default ETHERNET
     12	select PPS
     13	select NET_PTP_CLASSIFY
     14	help
     15	  The IEEE 1588 standard defines a method to precisely
     16	  synchronize distributed clocks over Ethernet networks. The
     17	  standard defines a Precision Time Protocol (PTP), which can
     18	  be used to achieve synchronization within a few dozen
     19	  microseconds. In addition, with the help of special hardware
     20	  time stamping units, it can be possible to achieve
     21	  synchronization to within a few hundred nanoseconds.
     22
     23	  This driver adds support for PTP clocks as character
     24	  devices. If you want to use a PTP clock, then you should
     25	  also enable at least one clock driver as well.
     26
     27	  To compile this driver as a module, choose M here: the module
     28	  will be called ptp.
     29
     30config PTP_1588_CLOCK_OPTIONAL
     31	tristate
     32	default y if PTP_1588_CLOCK=n
     33	default PTP_1588_CLOCK
     34	help
     35	  Drivers that can optionally use the PTP_1588_CLOCK framework
     36	  should depend on this symbol to prevent them from being built
     37	  into vmlinux while the PTP support itself is in a loadable
     38	  module.
     39	  If PTP support is disabled, this dependency will still be
     40	  met, and drivers refer to dummy helpers.
     41
     42config PTP_1588_CLOCK_DTE
     43	tristate "Broadcom DTE as PTP clock"
     44	depends on PTP_1588_CLOCK
     45	depends on NET && HAS_IOMEM
     46	depends on ARCH_BCM_MOBILE || (ARCH_BCM_IPROC && !(ARCH_BCM_NSP || ARCH_BCM_5301X)) || COMPILE_TEST
     47	default y
     48	help
     49	  This driver adds support for using the Digital timing engine
     50	  (DTE) in the Broadcom SoC's as a PTP clock.
     51
     52	  The clock can be used in both wired and wireless networks
     53	  for PTP purposes.
     54
     55	  To compile this driver as a module, choose M here: the module
     56	  will be called ptp_dte.
     57
     58config PTP_1588_CLOCK_QORIQ
     59	tristate "Freescale QorIQ 1588 timer as PTP clock"
     60	depends on GIANFAR || FSL_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF || COMPILE_TEST
     61	depends on PTP_1588_CLOCK
     62	default y
     63	help
     64	  This driver adds support for using the Freescale QorIQ 1588
     65	  timer as a PTP clock. This clock is only useful if your PTP
     66	  programs are getting hardware time stamps on the PTP Ethernet
     67	  packets using the SO_TIMESTAMPING API.
     68
     69	  To compile this driver as a module, choose M here: the module
     70	  will be called ptp-qoriq.
     71
     72comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."
     73	depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n
     74
     75config DP83640_PHY
     76	tristate "Driver for the National Semiconductor DP83640 PHYTER"
     77	depends on NETWORK_PHY_TIMESTAMPING
     78	depends on PHYLIB
     79	depends on PTP_1588_CLOCK
     80	select CRC32
     81	help
     82	  Supports the DP83640 PHYTER with IEEE 1588 features.
     83
     84	  This driver adds support for using the DP83640 as a PTP
     85	  clock. This clock is only useful if your PTP programs are
     86	  getting hardware time stamps on the PTP Ethernet packets
     87	  using the SO_TIMESTAMPING API.
     88
     89	  In order for this to work, your MAC driver must also
     90	  implement the skb_tx_timestamp() function.
     91
     92config PTP_1588_CLOCK_INES
     93	tristate "ZHAW InES PTP time stamping IP core"
     94	depends on NETWORK_PHY_TIMESTAMPING
     95	depends on HAS_IOMEM
     96	depends on PHYLIB
     97	depends on PTP_1588_CLOCK
     98	help
     99	  This driver adds support for using the ZHAW InES 1588 IP
    100	  core.  This clock is only useful if the MII bus of your MAC
    101	  is wired up to the core.
    102
    103config PTP_1588_CLOCK_PCH
    104	tristate "Intel PCH EG20T as PTP clock"
    105	depends on X86_32 || COMPILE_TEST
    106	depends on HAS_IOMEM && PCI
    107	depends on NET
    108	depends on PTP_1588_CLOCK
    109	help
    110	  This driver adds support for using the PCH EG20T as a PTP
    111	  clock. The hardware supports time stamping of PTP packets
    112	  when using the end-to-end delay (E2E) mechanism. The peer
    113	  delay mechanism (P2P) is not supported.
    114
    115	  This clock is only useful if your PTP programs are getting
    116	  hardware time stamps on the PTP Ethernet packets using the
    117	  SO_TIMESTAMPING API.
    118
    119	  To compile this driver as a module, choose M here: the module
    120	  will be called ptp_pch.
    121
    122config PTP_1588_CLOCK_KVM
    123	tristate "KVM virtual PTP clock"
    124	depends on PTP_1588_CLOCK
    125	depends on (KVM_GUEST && X86) || (HAVE_ARM_SMCCC_DISCOVERY && ARM_ARCH_TIMER)
    126	default y
    127	help
    128	  This driver adds support for using kvm infrastructure as a PTP
    129	  clock. This clock is only useful if you are using KVM guests.
    130
    131	  To compile this driver as a module, choose M here: the module
    132	  will be called ptp_kvm.
    133
    134config PTP_1588_CLOCK_IDT82P33
    135	tristate "IDT 82P33xxx PTP clock"
    136	depends on PTP_1588_CLOCK && I2C
    137	default n
    138	help
    139	  This driver adds support for using the IDT 82P33xxx as a PTP
    140	  clock. This clock is only useful if your time stamping MAC
    141	  is connected to the IDT chip.
    142
    143	  To compile this driver as a module, choose M here: the module
    144	  will be called ptp_idt82p33.
    145
    146config PTP_1588_CLOCK_IDTCM
    147	tristate "IDT CLOCKMATRIX as PTP clock"
    148	depends on PTP_1588_CLOCK && I2C
    149	default n
    150	help
    151	  This driver adds support for using IDT CLOCKMATRIX(TM) as a PTP
    152	  clock. This clock is only useful if your time stamping MAC
    153	  is connected to the IDT chip.
    154
    155	  To compile this driver as a module, choose M here: the module
    156	  will be called ptp_clockmatrix.
    157
    158config PTP_1588_CLOCK_VMW
    159	tristate "VMware virtual PTP clock"
    160	depends on ACPI && HYPERVISOR_GUEST && X86
    161	depends on PTP_1588_CLOCK
    162	help
    163	  This driver adds support for using VMware virtual precision
    164	  clock device as a PTP clock. This is only useful in virtual
    165	  machines running on VMware virtual infrastructure.
    166
    167	  To compile this driver as a module, choose M here: the module
    168	  will be called ptp_vmw.
    169
    170config PTP_1588_CLOCK_OCP
    171	tristate "OpenCompute TimeCard as PTP clock"
    172	depends on PTP_1588_CLOCK
    173	depends on HAS_IOMEM && PCI
    174	depends on I2C && MTD
    175	depends on SERIAL_8250
    176	depends on !S390
    177	depends on COMMON_CLK
    178	select NET_DEVLINK
    179	help
    180	  This driver adds support for an OpenCompute time card.
    181
    182	  The OpenCompute time card is an atomic clock along with
    183	  a GPS receiver that provides a Grandmaster clock source
    184	  for a PTP enabled network.
    185
    186	  More information is available at http://www.timingcard.com/
    187
    188endmenu