pwm-bcm2835.c (5139B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be> 4 */ 5 6#include <linux/clk.h> 7#include <linux/err.h> 8#include <linux/io.h> 9#include <linux/module.h> 10#include <linux/of.h> 11#include <linux/platform_device.h> 12#include <linux/pwm.h> 13 14#define PWM_CONTROL 0x000 15#define PWM_CONTROL_SHIFT(x) ((x) * 8) 16#define PWM_CONTROL_MASK 0xff 17#define PWM_MODE 0x80 /* set timer in PWM mode */ 18#define PWM_ENABLE (1 << 0) 19#define PWM_POLARITY (1 << 4) 20 21#define PERIOD(x) (((x) * 0x10) + 0x10) 22#define DUTY(x) (((x) * 0x10) + 0x14) 23 24#define PERIOD_MIN 0x2 25 26struct bcm2835_pwm { 27 struct pwm_chip chip; 28 struct device *dev; 29 void __iomem *base; 30 struct clk *clk; 31}; 32 33static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip) 34{ 35 return container_of(chip, struct bcm2835_pwm, chip); 36} 37 38static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) 39{ 40 struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); 41 u32 value; 42 43 value = readl(pc->base + PWM_CONTROL); 44 value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); 45 value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm)); 46 writel(value, pc->base + PWM_CONTROL); 47 48 return 0; 49} 50 51static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) 52{ 53 struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); 54 u32 value; 55 56 value = readl(pc->base + PWM_CONTROL); 57 value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); 58 writel(value, pc->base + PWM_CONTROL); 59} 60 61static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 62 const struct pwm_state *state) 63{ 64 65 struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); 66 unsigned long rate = clk_get_rate(pc->clk); 67 unsigned long long period_cycles; 68 u64 max_period; 69 70 u32 val; 71 72 if (!rate) { 73 dev_err(pc->dev, "failed to get clock rate\n"); 74 return -EINVAL; 75 } 76 77 /* 78 * period_cycles must be a 32 bit value, so period * rate / NSEC_PER_SEC 79 * must be <= U32_MAX. As U32_MAX * NSEC_PER_SEC < U64_MAX the 80 * multiplication period * rate doesn't overflow. 81 * To calculate the maximal possible period that guarantees the 82 * above inequality: 83 * 84 * round(period * rate / NSEC_PER_SEC) <= U32_MAX 85 * <=> period * rate / NSEC_PER_SEC < U32_MAX + 0.5 86 * <=> period * rate < (U32_MAX + 0.5) * NSEC_PER_SEC 87 * <=> period < ((U32_MAX + 0.5) * NSEC_PER_SEC) / rate 88 * <=> period < ((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate 89 * <=> period <= ceil((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate) - 1 90 */ 91 max_period = DIV_ROUND_UP_ULL((u64)U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC / 2, rate) - 1; 92 93 if (state->period > max_period) 94 return -EINVAL; 95 96 /* set period */ 97 period_cycles = DIV_ROUND_CLOSEST_ULL(state->period * rate, NSEC_PER_SEC); 98 99 /* don't accept a period that is too small */ 100 if (period_cycles < PERIOD_MIN) 101 return -EINVAL; 102 103 writel(period_cycles, pc->base + PERIOD(pwm->hwpwm)); 104 105 /* set duty cycle */ 106 val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle * rate, NSEC_PER_SEC); 107 writel(val, pc->base + DUTY(pwm->hwpwm)); 108 109 /* set polarity */ 110 val = readl(pc->base + PWM_CONTROL); 111 112 if (state->polarity == PWM_POLARITY_NORMAL) 113 val &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm)); 114 else 115 val |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm); 116 117 /* enable/disable */ 118 if (state->enabled) 119 val |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm); 120 else 121 val &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm)); 122 123 writel(val, pc->base + PWM_CONTROL); 124 125 return 0; 126} 127 128static const struct pwm_ops bcm2835_pwm_ops = { 129 .request = bcm2835_pwm_request, 130 .free = bcm2835_pwm_free, 131 .apply = bcm2835_pwm_apply, 132 .owner = THIS_MODULE, 133}; 134 135static int bcm2835_pwm_probe(struct platform_device *pdev) 136{ 137 struct bcm2835_pwm *pc; 138 int ret; 139 140 pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); 141 if (!pc) 142 return -ENOMEM; 143 144 pc->dev = &pdev->dev; 145 146 pc->base = devm_platform_ioremap_resource(pdev, 0); 147 if (IS_ERR(pc->base)) 148 return PTR_ERR(pc->base); 149 150 pc->clk = devm_clk_get(&pdev->dev, NULL); 151 if (IS_ERR(pc->clk)) 152 return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk), 153 "clock not found\n"); 154 155 ret = clk_prepare_enable(pc->clk); 156 if (ret) 157 return ret; 158 159 pc->chip.dev = &pdev->dev; 160 pc->chip.ops = &bcm2835_pwm_ops; 161 pc->chip.npwm = 2; 162 163 platform_set_drvdata(pdev, pc); 164 165 ret = pwmchip_add(&pc->chip); 166 if (ret < 0) 167 goto add_fail; 168 169 return 0; 170 171add_fail: 172 clk_disable_unprepare(pc->clk); 173 return ret; 174} 175 176static int bcm2835_pwm_remove(struct platform_device *pdev) 177{ 178 struct bcm2835_pwm *pc = platform_get_drvdata(pdev); 179 180 pwmchip_remove(&pc->chip); 181 182 clk_disable_unprepare(pc->clk); 183 184 return 0; 185} 186 187static const struct of_device_id bcm2835_pwm_of_match[] = { 188 { .compatible = "brcm,bcm2835-pwm", }, 189 { /* sentinel */ } 190}; 191MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match); 192 193static struct platform_driver bcm2835_pwm_driver = { 194 .driver = { 195 .name = "bcm2835-pwm", 196 .of_match_table = bcm2835_pwm_of_match, 197 }, 198 .probe = bcm2835_pwm_probe, 199 .remove = bcm2835_pwm_remove, 200}; 201module_platform_driver(bcm2835_pwm_driver); 202 203MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be>"); 204MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver"); 205MODULE_LICENSE("GPL v2");