sm5703-regulator.c (4832B)
1// SPDX-License-Identifier: GPL-2.0-only 2 3#include <linux/mfd/sm5703.h> 4#include <linux/module.h> 5#include <linux/mod_devicetable.h> 6#include <linux/platform_device.h> 7#include <linux/regmap.h> 8#include <linux/regulator/driver.h> 9#include <linux/regulator/of_regulator.h> 10 11enum sm5703_regulators { 12 SM5703_BUCK, 13 SM5703_LDO1, 14 SM5703_LDO2, 15 SM5703_LDO3, 16 SM5703_USBLDO1, 17 SM5703_USBLDO2, 18 SM5703_VBUS, 19 SM5703_MAX_REGULATORS, 20}; 21 22static const int sm5703_ldo_voltagemap[] = { 23 1500000, 1800000, 2600000, 2800000, 3000000, 3300000, 24}; 25 26static const int sm5703_buck_voltagemap[] = { 27 1000000, 1000000, 1000000, 1000000, 28 1000000, 1000000, 1000000, 1000000, 29 1000000, 1000000, 1000000, 1100000, 30 1200000, 1300000, 1400000, 1500000, 31 1600000, 1700000, 1800000, 1900000, 32 2000000, 2100000, 2200000, 2300000, 33 2400000, 2500000, 2600000, 2700000, 34 2800000, 2900000, 3000000, 3000000, 35}; 36 37#define SM5703USBLDO(_name, _id) \ 38 [SM5703_USBLDO ## _id] = { \ 39 .name = _name, \ 40 .of_match = _name, \ 41 .regulators_node = "regulators", \ 42 .type = REGULATOR_VOLTAGE, \ 43 .id = SM5703_USBLDO ## _id, \ 44 .ops = &sm5703_regulator_ops_fixed, \ 45 .fixed_uV = SM5703_USBLDO_MICROVOLT, \ 46 .enable_reg = SM5703_REG_USBLDO12, \ 47 .enable_mask = SM5703_REG_EN_USBLDO ##_id, \ 48 .owner = THIS_MODULE, \ 49 } 50 51#define SM5703VBUS(_name) \ 52 [SM5703_VBUS] = { \ 53 .name = _name, \ 54 .of_match = _name, \ 55 .regulators_node = "regulators", \ 56 .type = REGULATOR_VOLTAGE, \ 57 .id = SM5703_VBUS, \ 58 .ops = &sm5703_regulator_ops_fixed, \ 59 .fixed_uV = SM5703_VBUS_MICROVOLT, \ 60 .enable_reg = SM5703_REG_CNTL, \ 61 .enable_mask = SM5703_OPERATION_MODE_MASK, \ 62 .enable_val = SM5703_OPERATION_MODE_USB_OTG_MODE, \ 63 .disable_val = SM5703_OPERATION_MODE_CHARGING_ON, \ 64 .owner = THIS_MODULE, \ 65 } 66 67#define SM5703BUCK(_name) \ 68 [SM5703_BUCK] = { \ 69 .name = _name, \ 70 .of_match = _name, \ 71 .regulators_node = "regulators", \ 72 .type = REGULATOR_VOLTAGE, \ 73 .id = SM5703_BUCK, \ 74 .ops = &sm5703_regulator_ops, \ 75 .n_voltages = ARRAY_SIZE(sm5703_buck_voltagemap), \ 76 .volt_table = sm5703_buck_voltagemap, \ 77 .vsel_reg = SM5703_REG_BUCK, \ 78 .vsel_mask = SM5703_BUCK_VOLT_MASK, \ 79 .enable_reg = SM5703_REG_BUCK, \ 80 .enable_mask = SM5703_REG_EN_BUCK, \ 81 .owner = THIS_MODULE, \ 82 } 83 84#define SM5703LDO(_name, _id) \ 85 [SM5703_LDO ## _id] = { \ 86 .name = _name, \ 87 .of_match = _name, \ 88 .regulators_node = "regulators", \ 89 .type = REGULATOR_VOLTAGE, \ 90 .id = SM5703_LDO ## _id, \ 91 .ops = &sm5703_regulator_ops, \ 92 .n_voltages = ARRAY_SIZE(sm5703_ldo_voltagemap), \ 93 .volt_table = sm5703_ldo_voltagemap, \ 94 .vsel_reg = SM5703_REG_LDO ##_id, \ 95 .vsel_mask = SM5703_LDO_VOLT_MASK, \ 96 .enable_reg = SM5703_REG_LDO ##_id, \ 97 .enable_mask = SM5703_LDO_EN, \ 98 .owner = THIS_MODULE, \ 99 } 100 101static const struct regulator_ops sm5703_regulator_ops = { 102 .enable = regulator_enable_regmap, 103 .disable = regulator_disable_regmap, 104 .is_enabled = regulator_is_enabled_regmap, 105 .list_voltage = regulator_list_voltage_table, 106 .get_voltage_sel = regulator_get_voltage_sel_regmap, 107 .set_voltage_sel = regulator_set_voltage_sel_regmap, 108}; 109 110static const struct regulator_ops sm5703_regulator_ops_fixed = { 111 .enable = regulator_enable_regmap, 112 .disable = regulator_disable_regmap, 113 .is_enabled = regulator_is_enabled_regmap, 114}; 115 116static struct regulator_desc sm5703_regulators_desc[SM5703_MAX_REGULATORS] = { 117 SM5703BUCK("buck"), 118 SM5703LDO("ldo1", 1), 119 SM5703LDO("ldo2", 2), 120 SM5703LDO("ldo3", 3), 121 SM5703USBLDO("usbldo1", 1), 122 SM5703USBLDO("usbldo2", 2), 123 SM5703VBUS("vbus"), 124}; 125 126static int sm5703_regulator_probe(struct platform_device *pdev) 127{ 128 struct device *dev = &pdev->dev; 129 struct regulator_config config = { NULL, }; 130 struct regulator_dev *rdev; 131 struct sm5703_dev *sm5703 = dev_get_drvdata(pdev->dev.parent); 132 int i; 133 134 config.dev = dev->parent; 135 config.regmap = sm5703->regmap; 136 137 for (i = 0; i < SM5703_MAX_REGULATORS; i++) { 138 rdev = devm_regulator_register(dev, 139 &sm5703_regulators_desc[i], 140 &config); 141 if (IS_ERR(rdev)) 142 return dev_err_probe(dev, PTR_ERR(rdev), 143 "Failed to register a regulator\n"); 144 } 145 146 return 0; 147} 148 149static const struct platform_device_id sm5703_regulator_id[] = { 150 { "sm5703-regulator", 0 }, 151 {} 152}; 153MODULE_DEVICE_TABLE(platform, sm5703_regulator_id); 154 155static struct platform_driver sm5703_regulator_driver = { 156 .driver = { 157 .name = "sm5703-regulator", 158 }, 159 .probe = sm5703_regulator_probe, 160 .id_table = sm5703_regulator_id, 161}; 162 163module_platform_driver(sm5703_regulator_driver); 164 165MODULE_DESCRIPTION("Silicon Mitus SM5703 LDO/Buck/USB regulator driver"); 166MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>"); 167MODULE_LICENSE("GPL");