cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rtc-m41t80.c (26461B)


      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * I2C client/driver for the ST M41T80 family of i2c rtc chips.
      4 *
      5 * Author: Alexander Bigga <ab@mycable.de>
      6 *
      7 * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com>
      8 *
      9 * 2006 (c) mycable GmbH
     10 */
     11
     12#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
     13
     14#include <linux/bcd.h>
     15#include <linux/clk-provider.h>
     16#include <linux/i2c.h>
     17#include <linux/init.h>
     18#include <linux/kernel.h>
     19#include <linux/module.h>
     20#include <linux/of_device.h>
     21#include <linux/rtc.h>
     22#include <linux/slab.h>
     23#include <linux/mutex.h>
     24#include <linux/string.h>
     25#ifdef CONFIG_RTC_DRV_M41T80_WDT
     26#include <linux/fs.h>
     27#include <linux/ioctl.h>
     28#include <linux/miscdevice.h>
     29#include <linux/reboot.h>
     30#include <linux/watchdog.h>
     31#endif
     32
     33#define M41T80_REG_SSEC		0x00
     34#define M41T80_REG_SEC		0x01
     35#define M41T80_REG_MIN		0x02
     36#define M41T80_REG_HOUR		0x03
     37#define M41T80_REG_WDAY		0x04
     38#define M41T80_REG_DAY		0x05
     39#define M41T80_REG_MON		0x06
     40#define M41T80_REG_YEAR		0x07
     41#define M41T80_REG_ALARM_MON	0x0a
     42#define M41T80_REG_ALARM_DAY	0x0b
     43#define M41T80_REG_ALARM_HOUR	0x0c
     44#define M41T80_REG_ALARM_MIN	0x0d
     45#define M41T80_REG_ALARM_SEC	0x0e
     46#define M41T80_REG_FLAGS	0x0f
     47#define M41T80_REG_SQW		0x13
     48
     49#define M41T80_DATETIME_REG_SIZE	(M41T80_REG_YEAR + 1)
     50#define M41T80_ALARM_REG_SIZE	\
     51	(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
     52
     53#define M41T80_SQW_MAX_FREQ	32768
     54
     55#define M41T80_SEC_ST		BIT(7)	/* ST: Stop Bit */
     56#define M41T80_ALMON_AFE	BIT(7)	/* AFE: AF Enable Bit */
     57#define M41T80_ALMON_SQWE	BIT(6)	/* SQWE: SQW Enable Bit */
     58#define M41T80_ALHOUR_HT	BIT(6)	/* HT: Halt Update Bit */
     59#define M41T80_FLAGS_OF		BIT(2)	/* OF: Oscillator Failure Bit */
     60#define M41T80_FLAGS_AF		BIT(6)	/* AF: Alarm Flag Bit */
     61#define M41T80_FLAGS_BATT_LOW	BIT(4)	/* BL: Battery Low Bit */
     62#define M41T80_WATCHDOG_RB2	BIT(7)	/* RB: Watchdog resolution */
     63#define M41T80_WATCHDOG_RB1	BIT(1)	/* RB: Watchdog resolution */
     64#define M41T80_WATCHDOG_RB0	BIT(0)	/* RB: Watchdog resolution */
     65
     66#define M41T80_FEATURE_HT	BIT(0)	/* Halt feature */
     67#define M41T80_FEATURE_BL	BIT(1)	/* Battery low indicator */
     68#define M41T80_FEATURE_SQ	BIT(2)	/* Squarewave feature */
     69#define M41T80_FEATURE_WD	BIT(3)	/* Extra watchdog resolution */
     70#define M41T80_FEATURE_SQ_ALT	BIT(4)	/* RSx bits are in reg 4 */
     71
     72static const struct i2c_device_id m41t80_id[] = {
     73	{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
     74	{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
     75	{ "m41t80", M41T80_FEATURE_SQ },
     76	{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
     77	{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
     78	{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
     79	{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
     80	{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
     81	{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
     82	{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
     83	{ "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT },
     84	{ }
     85};
     86MODULE_DEVICE_TABLE(i2c, m41t80_id);
     87
     88static const __maybe_unused struct of_device_id m41t80_of_match[] = {
     89	{
     90		.compatible = "st,m41t62",
     91		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT)
     92	},
     93	{
     94		.compatible = "st,m41t65",
     95		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD)
     96	},
     97	{
     98		.compatible = "st,m41t80",
     99		.data = (void *)(M41T80_FEATURE_SQ)
    100	},
    101	{
    102		.compatible = "st,m41t81",
    103		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ)
    104	},
    105	{
    106		.compatible = "st,m41t81s",
    107		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
    108	},
    109	{
    110		.compatible = "st,m41t82",
    111		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
    112	},
    113	{
    114		.compatible = "st,m41t83",
    115		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
    116	},
    117	{
    118		.compatible = "st,m41t84",
    119		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
    120	},
    121	{
    122		.compatible = "st,m41t85",
    123		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
    124	},
    125	{
    126		.compatible = "st,m41t87",
    127		.data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ)
    128	},
    129	{
    130		.compatible = "microcrystal,rv4162",
    131		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
    132	},
    133	/* DT compatibility only, do not use compatibles below: */
    134	{
    135		.compatible = "st,rv4162",
    136		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
    137	},
    138	{
    139		.compatible = "rv4162",
    140		.data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT)
    141	},
    142	{ }
    143};
    144MODULE_DEVICE_TABLE(of, m41t80_of_match);
    145
    146struct m41t80_data {
    147	unsigned long features;
    148	struct i2c_client *client;
    149	struct rtc_device *rtc;
    150#ifdef CONFIG_COMMON_CLK
    151	struct clk_hw sqw;
    152	unsigned long freq;
    153	unsigned int sqwe;
    154#endif
    155};
    156
    157static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
    158{
    159	struct i2c_client *client = dev_id;
    160	struct m41t80_data *m41t80 = i2c_get_clientdata(client);
    161	unsigned long events = 0;
    162	int flags, flags_afe;
    163
    164	rtc_lock(m41t80->rtc);
    165
    166	flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
    167	if (flags_afe < 0) {
    168		rtc_unlock(m41t80->rtc);
    169		return IRQ_NONE;
    170	}
    171
    172	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
    173	if (flags <= 0) {
    174		rtc_unlock(m41t80->rtc);
    175		return IRQ_NONE;
    176	}
    177
    178	if (flags & M41T80_FLAGS_AF) {
    179		flags &= ~M41T80_FLAGS_AF;
    180		flags_afe &= ~M41T80_ALMON_AFE;
    181		events |= RTC_AF;
    182	}
    183
    184	if (events) {
    185		rtc_update_irq(m41t80->rtc, 1, events);
    186		i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags);
    187		i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
    188					  flags_afe);
    189	}
    190
    191	rtc_unlock(m41t80->rtc);
    192
    193	return IRQ_HANDLED;
    194}
    195
    196static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm)
    197{
    198	struct i2c_client *client = to_i2c_client(dev);
    199	unsigned char buf[8];
    200	int err, flags;
    201
    202	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
    203	if (flags < 0)
    204		return flags;
    205
    206	if (flags & M41T80_FLAGS_OF) {
    207		dev_err(&client->dev, "Oscillator failure, data is invalid.\n");
    208		return -EINVAL;
    209	}
    210
    211	err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC,
    212					    sizeof(buf), buf);
    213	if (err < 0) {
    214		dev_err(&client->dev, "Unable to read date\n");
    215		return err;
    216	}
    217
    218	tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f);
    219	tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f);
    220	tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f);
    221	tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f);
    222	tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07;
    223	tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1;
    224
    225	/* assume 20YY not 19YY, and ignore the Century Bit */
    226	tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100;
    227	return 0;
    228}
    229
    230static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)
    231{
    232	struct i2c_client *client = to_i2c_client(dev);
    233	struct m41t80_data *clientdata = i2c_get_clientdata(client);
    234	unsigned char buf[8];
    235	int err, flags;
    236
    237	buf[M41T80_REG_SSEC] = 0;
    238	buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec);
    239	buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min);
    240	buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour);
    241	buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday);
    242	buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1);
    243	buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
    244	buf[M41T80_REG_WDAY] = tm->tm_wday;
    245
    246	/* If the square wave output is controlled in the weekday register */
    247	if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
    248		int val;
    249
    250		val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
    251		if (val < 0)
    252			return val;
    253
    254		buf[M41T80_REG_WDAY] |= (val & 0xf0);
    255	}
    256
    257	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
    258					     sizeof(buf), buf);
    259	if (err < 0) {
    260		dev_err(&client->dev, "Unable to write to date registers\n");
    261		return err;
    262	}
    263
    264	/* Clear the OF bit of Flags Register */
    265	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
    266	if (flags < 0)
    267		return flags;
    268
    269	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
    270					flags & ~M41T80_FLAGS_OF);
    271	if (err < 0) {
    272		dev_err(&client->dev, "Unable to write flags register\n");
    273		return err;
    274	}
    275
    276	return err;
    277}
    278
    279static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq)
    280{
    281	struct i2c_client *client = to_i2c_client(dev);
    282	struct m41t80_data *clientdata = i2c_get_clientdata(client);
    283	int reg;
    284
    285	if (clientdata->features & M41T80_FEATURE_BL) {
    286		reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
    287		if (reg < 0)
    288			return reg;
    289		seq_printf(seq, "battery\t\t: %s\n",
    290			   (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
    291	}
    292	return 0;
    293}
    294
    295static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
    296{
    297	struct i2c_client *client = to_i2c_client(dev);
    298	int flags, retval;
    299
    300	flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
    301	if (flags < 0)
    302		return flags;
    303
    304	if (enabled)
    305		flags |= M41T80_ALMON_AFE;
    306	else
    307		flags &= ~M41T80_ALMON_AFE;
    308
    309	retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
    310	if (retval < 0) {
    311		dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
    312		return retval;
    313	}
    314	return 0;
    315}
    316
    317static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
    318{
    319	struct i2c_client *client = to_i2c_client(dev);
    320	u8 alarmvals[5];
    321	int ret, err;
    322
    323	alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1);
    324	alarmvals[1] = bin2bcd(alrm->time.tm_mday);
    325	alarmvals[2] = bin2bcd(alrm->time.tm_hour);
    326	alarmvals[3] = bin2bcd(alrm->time.tm_min);
    327	alarmvals[4] = bin2bcd(alrm->time.tm_sec);
    328
    329	/* Clear AF and AFE flags */
    330	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
    331	if (ret < 0)
    332		return ret;
    333	err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
    334					ret & ~(M41T80_ALMON_AFE));
    335	if (err < 0) {
    336		dev_err(dev, "Unable to clear AFE bit\n");
    337		return err;
    338	}
    339
    340	/* Keep SQWE bit value */
    341	alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
    342
    343	ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
    344	if (ret < 0)
    345		return ret;
    346
    347	err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS,
    348					ret & ~(M41T80_FLAGS_AF));
    349	if (err < 0) {
    350		dev_err(dev, "Unable to clear AF bit\n");
    351		return err;
    352	}
    353
    354	/* Write the alarm */
    355	err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON,
    356					     5, alarmvals);
    357	if (err)
    358		return err;
    359
    360	/* Enable the alarm interrupt */
    361	if (alrm->enabled) {
    362		alarmvals[0] |= M41T80_ALMON_AFE;
    363		err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
    364						alarmvals[0]);
    365		if (err)
    366			return err;
    367	}
    368
    369	return 0;
    370}
    371
    372static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
    373{
    374	struct i2c_client *client = to_i2c_client(dev);
    375	u8 alarmvals[5];
    376	int flags, ret;
    377
    378	ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON,
    379					    5, alarmvals);
    380	if (ret != 5)
    381		return ret < 0 ? ret : -EIO;
    382
    383	flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
    384	if (flags < 0)
    385		return flags;
    386
    387	alrm->time.tm_sec  = bcd2bin(alarmvals[4] & 0x7f);
    388	alrm->time.tm_min  = bcd2bin(alarmvals[3] & 0x7f);
    389	alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
    390	alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
    391	alrm->time.tm_mon  = bcd2bin(alarmvals[0] & 0x3f) - 1;
    392
    393	alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
    394	alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
    395
    396	return 0;
    397}
    398
    399static const struct rtc_class_ops m41t80_rtc_ops = {
    400	.read_time = m41t80_rtc_read_time,
    401	.set_time = m41t80_rtc_set_time,
    402	.proc = m41t80_rtc_proc,
    403	.read_alarm = m41t80_read_alarm,
    404	.set_alarm = m41t80_set_alarm,
    405	.alarm_irq_enable = m41t80_alarm_irq_enable,
    406};
    407
    408#ifdef CONFIG_PM_SLEEP
    409static int m41t80_suspend(struct device *dev)
    410{
    411	struct i2c_client *client = to_i2c_client(dev);
    412
    413	if (client->irq >= 0 && device_may_wakeup(dev))
    414		enable_irq_wake(client->irq);
    415
    416	return 0;
    417}
    418
    419static int m41t80_resume(struct device *dev)
    420{
    421	struct i2c_client *client = to_i2c_client(dev);
    422
    423	if (client->irq >= 0 && device_may_wakeup(dev))
    424		disable_irq_wake(client->irq);
    425
    426	return 0;
    427}
    428#endif
    429
    430static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
    431
    432#ifdef CONFIG_COMMON_CLK
    433#define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
    434
    435static unsigned long m41t80_decode_freq(int setting)
    436{
    437	return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ :
    438		M41T80_SQW_MAX_FREQ >> setting;
    439}
    440
    441static unsigned long m41t80_get_freq(struct m41t80_data *m41t80)
    442{
    443	struct i2c_client *client = m41t80->client;
    444	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
    445		M41T80_REG_WDAY : M41T80_REG_SQW;
    446	int ret = i2c_smbus_read_byte_data(client, reg_sqw);
    447
    448	if (ret < 0)
    449		return 0;
    450	return m41t80_decode_freq(ret >> 4);
    451}
    452
    453static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
    454					    unsigned long parent_rate)
    455{
    456	return sqw_to_m41t80_data(hw)->freq;
    457}
    458
    459static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
    460				  unsigned long *prate)
    461{
    462	if (rate >= M41T80_SQW_MAX_FREQ)
    463		return M41T80_SQW_MAX_FREQ;
    464	if (rate >= M41T80_SQW_MAX_FREQ / 4)
    465		return M41T80_SQW_MAX_FREQ / 4;
    466	if (!rate)
    467		return 0;
    468	return 1 << ilog2(rate);
    469}
    470
    471static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
    472			       unsigned long parent_rate)
    473{
    474	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
    475	struct i2c_client *client = m41t80->client;
    476	int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
    477		M41T80_REG_WDAY : M41T80_REG_SQW;
    478	int reg, ret, val = 0;
    479
    480	if (rate >= M41T80_SQW_MAX_FREQ)
    481		val = 1;
    482	else if (rate >= M41T80_SQW_MAX_FREQ / 4)
    483		val = 2;
    484	else if (rate)
    485		val = 15 - ilog2(rate);
    486
    487	reg = i2c_smbus_read_byte_data(client, reg_sqw);
    488	if (reg < 0)
    489		return reg;
    490
    491	reg = (reg & 0x0f) | (val << 4);
    492
    493	ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
    494	if (!ret)
    495		m41t80->freq = m41t80_decode_freq(val);
    496	return ret;
    497}
    498
    499static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
    500{
    501	struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
    502	struct i2c_client *client = m41t80->client;
    503	int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
    504
    505	if (ret < 0)
    506		return ret;
    507
    508	if (enable)
    509		ret |= M41T80_ALMON_SQWE;
    510	else
    511		ret &= ~M41T80_ALMON_SQWE;
    512
    513	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
    514	if (!ret)
    515		m41t80->sqwe = enable;
    516	return ret;
    517}
    518
    519static int m41t80_sqw_prepare(struct clk_hw *hw)
    520{
    521	return m41t80_sqw_control(hw, 1);
    522}
    523
    524static void m41t80_sqw_unprepare(struct clk_hw *hw)
    525{
    526	m41t80_sqw_control(hw, 0);
    527}
    528
    529static int m41t80_sqw_is_prepared(struct clk_hw *hw)
    530{
    531	return sqw_to_m41t80_data(hw)->sqwe;
    532}
    533
    534static const struct clk_ops m41t80_sqw_ops = {
    535	.prepare = m41t80_sqw_prepare,
    536	.unprepare = m41t80_sqw_unprepare,
    537	.is_prepared = m41t80_sqw_is_prepared,
    538	.recalc_rate = m41t80_sqw_recalc_rate,
    539	.round_rate = m41t80_sqw_round_rate,
    540	.set_rate = m41t80_sqw_set_rate,
    541};
    542
    543static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
    544{
    545	struct i2c_client *client = m41t80->client;
    546	struct device_node *node = client->dev.of_node;
    547	struct device_node *fixed_clock;
    548	struct clk *clk;
    549	struct clk_init_data init;
    550	int ret;
    551
    552	fixed_clock = of_get_child_by_name(node, "clock");
    553	if (fixed_clock) {
    554		/*
    555		 * skip registering square wave clock when a fixed
    556		 * clock has been registered. The fixed clock is
    557		 * registered automatically when being referenced.
    558		 */
    559		of_node_put(fixed_clock);
    560		return NULL;
    561	}
    562
    563	/* First disable the clock */
    564	ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
    565	if (ret < 0)
    566		return ERR_PTR(ret);
    567	ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
    568					ret & ~(M41T80_ALMON_SQWE));
    569	if (ret < 0)
    570		return ERR_PTR(ret);
    571
    572	init.name = "m41t80-sqw";
    573	init.ops = &m41t80_sqw_ops;
    574	init.flags = 0;
    575	init.parent_names = NULL;
    576	init.num_parents = 0;
    577	m41t80->sqw.init = &init;
    578	m41t80->freq = m41t80_get_freq(m41t80);
    579
    580	/* optional override of the clockname */
    581	of_property_read_string(node, "clock-output-names", &init.name);
    582
    583	/* register the clock */
    584	clk = clk_register(&client->dev, &m41t80->sqw);
    585	if (!IS_ERR(clk))
    586		of_clk_add_provider(node, of_clk_src_simple_get, clk);
    587
    588	return clk;
    589}
    590#endif
    591
    592#ifdef CONFIG_RTC_DRV_M41T80_WDT
    593/*
    594 *****************************************************************************
    595 *
    596 * Watchdog Driver
    597 *
    598 *****************************************************************************
    599 */
    600static DEFINE_MUTEX(m41t80_rtc_mutex);
    601static struct i2c_client *save_client;
    602
    603/* Default margin */
    604#define WD_TIMO 60		/* 1..31 seconds */
    605
    606static int wdt_margin = WD_TIMO;
    607module_param(wdt_margin, int, 0);
    608MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)");
    609
    610static unsigned long wdt_is_open;
    611static int boot_flag;
    612
    613/**
    614 *	wdt_ping - Reload counter one with the watchdog timeout.
    615 *	We don't bother reloading the cascade counter.
    616 */
    617static void wdt_ping(void)
    618{
    619	unsigned char i2c_data[2];
    620	struct i2c_msg msgs1[1] = {
    621		{
    622			.addr	= save_client->addr,
    623			.flags	= 0,
    624			.len	= 2,
    625			.buf	= i2c_data,
    626		},
    627	};
    628	struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
    629
    630	i2c_data[0] = 0x09;		/* watchdog register */
    631
    632	if (wdt_margin > 31)
    633		i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */
    634	else
    635		/*
    636		 * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02)
    637		 */
    638		i2c_data[1] = wdt_margin << 2 | 0x82;
    639
    640	/*
    641	 * M41T65 has three bits for watchdog resolution.  Don't set bit 7, as
    642	 * that would be an invalid resolution.
    643	 */
    644	if (clientdata->features & M41T80_FEATURE_WD)
    645		i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
    646
    647	i2c_transfer(save_client->adapter, msgs1, 1);
    648}
    649
    650/**
    651 *	wdt_disable - disables watchdog.
    652 */
    653static void wdt_disable(void)
    654{
    655	unsigned char i2c_data[2], i2c_buf[0x10];
    656	struct i2c_msg msgs0[2] = {
    657		{
    658			.addr	= save_client->addr,
    659			.flags	= 0,
    660			.len	= 1,
    661			.buf	= i2c_data,
    662		},
    663		{
    664			.addr	= save_client->addr,
    665			.flags	= I2C_M_RD,
    666			.len	= 1,
    667			.buf	= i2c_buf,
    668		},
    669	};
    670	struct i2c_msg msgs1[1] = {
    671		{
    672			.addr	= save_client->addr,
    673			.flags	= 0,
    674			.len	= 2,
    675			.buf	= i2c_data,
    676		},
    677	};
    678
    679	i2c_data[0] = 0x09;
    680	i2c_transfer(save_client->adapter, msgs0, 2);
    681
    682	i2c_data[0] = 0x09;
    683	i2c_data[1] = 0x00;
    684	i2c_transfer(save_client->adapter, msgs1, 1);
    685}
    686
    687/**
    688 *	wdt_write - write to watchdog.
    689 *	@file: file handle to the watchdog
    690 *	@buf: buffer to write (unused as data does not matter here
    691 *	@count: count of bytes
    692 *	@ppos: pointer to the position to write. No seeks allowed
    693 *
    694 *	A write to a watchdog device is defined as a keepalive signal. Any
    695 *	write of data will do, as we we don't define content meaning.
    696 */
    697static ssize_t wdt_write(struct file *file, const char __user *buf,
    698			 size_t count, loff_t *ppos)
    699{
    700	if (count) {
    701		wdt_ping();
    702		return 1;
    703	}
    704	return 0;
    705}
    706
    707static ssize_t wdt_read(struct file *file, char __user *buf,
    708			size_t count, loff_t *ppos)
    709{
    710	return 0;
    711}
    712
    713/**
    714 *	wdt_ioctl - ioctl handler to set watchdog.
    715 *	@file: file handle to the device
    716 *	@cmd: watchdog command
    717 *	@arg: argument pointer
    718 *
    719 *	The watchdog API defines a common set of functions for all watchdogs
    720 *	according to their available features. We only actually usefully support
    721 *	querying capabilities and current status.
    722 */
    723static int wdt_ioctl(struct file *file, unsigned int cmd,
    724		     unsigned long arg)
    725{
    726	int new_margin, rv;
    727	static struct watchdog_info ident = {
    728		.options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING |
    729			WDIOF_SETTIMEOUT,
    730		.firmware_version = 1,
    731		.identity = "M41T80 WTD"
    732	};
    733
    734	switch (cmd) {
    735	case WDIOC_GETSUPPORT:
    736		return copy_to_user((struct watchdog_info __user *)arg, &ident,
    737				    sizeof(ident)) ? -EFAULT : 0;
    738
    739	case WDIOC_GETSTATUS:
    740	case WDIOC_GETBOOTSTATUS:
    741		return put_user(boot_flag, (int __user *)arg);
    742	case WDIOC_KEEPALIVE:
    743		wdt_ping();
    744		return 0;
    745	case WDIOC_SETTIMEOUT:
    746		if (get_user(new_margin, (int __user *)arg))
    747			return -EFAULT;
    748		/* Arbitrary, can't find the card's limits */
    749		if (new_margin < 1 || new_margin > 124)
    750			return -EINVAL;
    751		wdt_margin = new_margin;
    752		wdt_ping();
    753		fallthrough;
    754	case WDIOC_GETTIMEOUT:
    755		return put_user(wdt_margin, (int __user *)arg);
    756
    757	case WDIOC_SETOPTIONS:
    758		if (copy_from_user(&rv, (int __user *)arg, sizeof(int)))
    759			return -EFAULT;
    760
    761		if (rv & WDIOS_DISABLECARD) {
    762			pr_info("disable watchdog\n");
    763			wdt_disable();
    764		}
    765
    766		if (rv & WDIOS_ENABLECARD) {
    767			pr_info("enable watchdog\n");
    768			wdt_ping();
    769		}
    770
    771		return -EINVAL;
    772	}
    773	return -ENOTTY;
    774}
    775
    776static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
    777			       unsigned long arg)
    778{
    779	int ret;
    780
    781	mutex_lock(&m41t80_rtc_mutex);
    782	ret = wdt_ioctl(file, cmd, arg);
    783	mutex_unlock(&m41t80_rtc_mutex);
    784
    785	return ret;
    786}
    787
    788/**
    789 *	wdt_open - open a watchdog.
    790 *	@inode: inode of device
    791 *	@file: file handle to device
    792 *
    793 */
    794static int wdt_open(struct inode *inode, struct file *file)
    795{
    796	if (iminor(inode) == WATCHDOG_MINOR) {
    797		mutex_lock(&m41t80_rtc_mutex);
    798		if (test_and_set_bit(0, &wdt_is_open)) {
    799			mutex_unlock(&m41t80_rtc_mutex);
    800			return -EBUSY;
    801		}
    802		/*
    803		 *	Activate
    804		 */
    805		wdt_is_open = 1;
    806		mutex_unlock(&m41t80_rtc_mutex);
    807		return stream_open(inode, file);
    808	}
    809	return -ENODEV;
    810}
    811
    812/**
    813 *	wdt_release - release a watchdog.
    814 *	@inode: inode to board
    815 *	@file: file handle to board
    816 *
    817 */
    818static int wdt_release(struct inode *inode, struct file *file)
    819{
    820	if (iminor(inode) == WATCHDOG_MINOR)
    821		clear_bit(0, &wdt_is_open);
    822	return 0;
    823}
    824
    825/**
    826 *	wdt_notify_sys - notify to watchdog.
    827 *	@this: our notifier block
    828 *	@code: the event being reported
    829 *	@unused: unused
    830 *
    831 *	Our notifier is called on system shutdowns. We want to turn the card
    832 *	off at reboot otherwise the machine will reboot again during memory
    833 *	test or worse yet during the following fsck. This would suck, in fact
    834 *	trust me - if it happens it does suck.
    835 */
    836static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
    837			  void *unused)
    838{
    839	if (code == SYS_DOWN || code == SYS_HALT)
    840		/* Disable Watchdog */
    841		wdt_disable();
    842	return NOTIFY_DONE;
    843}
    844
    845static const struct file_operations wdt_fops = {
    846	.owner	= THIS_MODULE,
    847	.read	= wdt_read,
    848	.unlocked_ioctl = wdt_unlocked_ioctl,
    849	.compat_ioctl = compat_ptr_ioctl,
    850	.write	= wdt_write,
    851	.open	= wdt_open,
    852	.release = wdt_release,
    853	.llseek = no_llseek,
    854};
    855
    856static struct miscdevice wdt_dev = {
    857	.minor = WATCHDOG_MINOR,
    858	.name = "watchdog",
    859	.fops = &wdt_fops,
    860};
    861
    862/*
    863 *	The WDT card needs to learn about soft shutdowns in order to
    864 *	turn the timebomb registers off.
    865 */
    866static struct notifier_block wdt_notifier = {
    867	.notifier_call = wdt_notify_sys,
    868};
    869#endif /* CONFIG_RTC_DRV_M41T80_WDT */
    870
    871/*
    872 *****************************************************************************
    873 *
    874 *	Driver Interface
    875 *
    876 *****************************************************************************
    877 */
    878
    879static int m41t80_probe(struct i2c_client *client,
    880			const struct i2c_device_id *id)
    881{
    882	struct i2c_adapter *adapter = client->adapter;
    883	int rc = 0;
    884	struct rtc_time tm;
    885	struct m41t80_data *m41t80_data = NULL;
    886	bool wakeup_source = false;
    887
    888	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
    889				     I2C_FUNC_SMBUS_BYTE_DATA)) {
    890		dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n");
    891		return -ENODEV;
    892	}
    893
    894	m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data),
    895				   GFP_KERNEL);
    896	if (!m41t80_data)
    897		return -ENOMEM;
    898
    899	m41t80_data->client = client;
    900	if (client->dev.of_node)
    901		m41t80_data->features = (unsigned long)
    902			of_device_get_match_data(&client->dev);
    903	else
    904		m41t80_data->features = id->driver_data;
    905	i2c_set_clientdata(client, m41t80_data);
    906
    907	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
    908	if (IS_ERR(m41t80_data->rtc))
    909		return PTR_ERR(m41t80_data->rtc);
    910
    911#ifdef CONFIG_OF
    912	wakeup_source = of_property_read_bool(client->dev.of_node,
    913					      "wakeup-source");
    914#endif
    915	if (client->irq > 0) {
    916		rc = devm_request_threaded_irq(&client->dev, client->irq,
    917					       NULL, m41t80_handle_irq,
    918					       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
    919					       "m41t80", client);
    920		if (rc) {
    921			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
    922			client->irq = 0;
    923			wakeup_source = false;
    924		}
    925	}
    926	if (client->irq > 0 || wakeup_source)
    927		device_init_wakeup(&client->dev, true);
    928	else
    929		clear_bit(RTC_FEATURE_ALARM, m41t80_data->rtc->features);
    930
    931	m41t80_data->rtc->ops = &m41t80_rtc_ops;
    932	m41t80_data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
    933	m41t80_data->rtc->range_max = RTC_TIMESTAMP_END_2099;
    934
    935	if (client->irq <= 0)
    936		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, m41t80_data->rtc->features);
    937
    938	/* Make sure HT (Halt Update) bit is cleared */
    939	rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
    940
    941	if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
    942		if (m41t80_data->features & M41T80_FEATURE_HT) {
    943			m41t80_rtc_read_time(&client->dev, &tm);
    944			dev_info(&client->dev, "HT bit was set!\n");
    945			dev_info(&client->dev, "Power Down at %ptR\n", &tm);
    946		}
    947		rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
    948					       rc & ~M41T80_ALHOUR_HT);
    949	}
    950
    951	if (rc < 0) {
    952		dev_err(&client->dev, "Can't clear HT bit\n");
    953		return rc;
    954	}
    955
    956	/* Make sure ST (stop) bit is cleared */
    957	rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
    958
    959	if (rc >= 0 && rc & M41T80_SEC_ST)
    960		rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
    961					       rc & ~M41T80_SEC_ST);
    962	if (rc < 0) {
    963		dev_err(&client->dev, "Can't clear ST bit\n");
    964		return rc;
    965	}
    966
    967#ifdef CONFIG_RTC_DRV_M41T80_WDT
    968	if (m41t80_data->features & M41T80_FEATURE_HT) {
    969		save_client = client;
    970		rc = misc_register(&wdt_dev);
    971		if (rc)
    972			return rc;
    973		rc = register_reboot_notifier(&wdt_notifier);
    974		if (rc) {
    975			misc_deregister(&wdt_dev);
    976			return rc;
    977		}
    978	}
    979#endif
    980#ifdef CONFIG_COMMON_CLK
    981	if (m41t80_data->features & M41T80_FEATURE_SQ)
    982		m41t80_sqw_register_clk(m41t80_data);
    983#endif
    984
    985	rc = devm_rtc_register_device(m41t80_data->rtc);
    986	if (rc)
    987		return rc;
    988
    989	return 0;
    990}
    991
    992static int m41t80_remove(struct i2c_client *client)
    993{
    994#ifdef CONFIG_RTC_DRV_M41T80_WDT
    995	struct m41t80_data *clientdata = i2c_get_clientdata(client);
    996
    997	if (clientdata->features & M41T80_FEATURE_HT) {
    998		misc_deregister(&wdt_dev);
    999		unregister_reboot_notifier(&wdt_notifier);
   1000	}
   1001#endif
   1002
   1003	return 0;
   1004}
   1005
   1006static struct i2c_driver m41t80_driver = {
   1007	.driver = {
   1008		.name = "rtc-m41t80",
   1009		.of_match_table = of_match_ptr(m41t80_of_match),
   1010		.pm = &m41t80_pm,
   1011	},
   1012	.probe = m41t80_probe,
   1013	.remove = m41t80_remove,
   1014	.id_table = m41t80_id,
   1015};
   1016
   1017module_i2c_driver(m41t80_driver);
   1018
   1019MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>");
   1020MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver");
   1021MODULE_LICENSE("GPL");