acornscsi.h (9548B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * linux/drivers/acorn/scsi/acornscsi.h 4 * 5 * Copyright (C) 1997 Russell King 6 * 7 * Acorn SCSI driver 8 */ 9#ifndef ACORNSCSI_H 10#define ACORNSCSI_H 11 12/* SBIC registers */ 13#define SBIC_OWNID 0 14#define OWNID_FS1 (1<<7) 15#define OWNID_FS2 (1<<6) 16#define OWNID_EHP (1<<4) 17#define OWNID_EAF (1<<3) 18 19#define SBIC_CTRL 1 20#define CTRL_DMAMODE (1<<7) 21#define CTRL_DMADBAMODE (1<<6) 22#define CTRL_DMABURST (1<<5) 23#define CTRL_DMAPOLLED 0 24#define CTRL_HHP (1<<4) 25#define CTRL_EDI (1<<3) 26#define CTRL_IDI (1<<2) 27#define CTRL_HA (1<<1) 28#define CTRL_HSP (1<<0) 29 30#define SBIC_TIMEOUT 2 31#define SBIC_TOTSECTS 3 32#define SBIC_TOTHEADS 4 33#define SBIC_TOTCYLH 5 34#define SBIC_TOTCYLL 6 35#define SBIC_LOGADDRH 7 36#define SBIC_LOGADDRM2 8 37#define SBIC_LOGADDRM1 9 38#define SBIC_LOGADDRL 10 39#define SBIC_SECTORNUM 11 40#define SBIC_HEADNUM 12 41#define SBIC_CYLH 13 42#define SBIC_CYLL 14 43#define SBIC_TARGETLUN 15 44#define TARGETLUN_TLV (1<<7) 45#define TARGETLUN_DOK (1<<6) 46 47#define SBIC_CMNDPHASE 16 48#define SBIC_SYNCHTRANSFER 17 49#define SYNCHTRANSFER_OF0 0x00 50#define SYNCHTRANSFER_OF1 0x01 51#define SYNCHTRANSFER_OF2 0x02 52#define SYNCHTRANSFER_OF3 0x03 53#define SYNCHTRANSFER_OF4 0x04 54#define SYNCHTRANSFER_OF5 0x05 55#define SYNCHTRANSFER_OF6 0x06 56#define SYNCHTRANSFER_OF7 0x07 57#define SYNCHTRANSFER_OF8 0x08 58#define SYNCHTRANSFER_OF9 0x09 59#define SYNCHTRANSFER_OF10 0x0A 60#define SYNCHTRANSFER_OF11 0x0B 61#define SYNCHTRANSFER_OF12 0x0C 62#define SYNCHTRANSFER_8DBA 0x00 63#define SYNCHTRANSFER_2DBA 0x20 64#define SYNCHTRANSFER_3DBA 0x30 65#define SYNCHTRANSFER_4DBA 0x40 66#define SYNCHTRANSFER_5DBA 0x50 67#define SYNCHTRANSFER_6DBA 0x60 68#define SYNCHTRANSFER_7DBA 0x70 69 70#define SBIC_TRANSCNTH 18 71#define SBIC_TRANSCNTM 19 72#define SBIC_TRANSCNTL 20 73#define SBIC_DESTID 21 74#define DESTID_SCC (1<<7) 75#define DESTID_DPD (1<<6) 76 77#define SBIC_SOURCEID 22 78#define SOURCEID_ER (1<<7) 79#define SOURCEID_ES (1<<6) 80#define SOURCEID_DSP (1<<5) 81#define SOURCEID_SIV (1<<4) 82 83#define SBIC_SSR 23 84#define SBIC_CMND 24 85#define CMND_RESET 0x00 86#define CMND_ABORT 0x01 87#define CMND_ASSERTATN 0x02 88#define CMND_NEGATEACK 0x03 89#define CMND_DISCONNECT 0x04 90#define CMND_RESELECT 0x05 91#define CMND_SELWITHATN 0x06 92#define CMND_SELECT 0x07 93#define CMND_SELECTATNTRANSFER 0x08 94#define CMND_SELECTTRANSFER 0x09 95#define CMND_RESELECTRXDATA 0x0A 96#define CMND_RESELECTTXDATA 0x0B 97#define CMND_WAITFORSELRECV 0x0C 98#define CMND_SENDSTATCMD 0x0D 99#define CMND_SENDDISCONNECT 0x0E 100#define CMND_SETIDI 0x0F 101#define CMND_RECEIVECMD 0x10 102#define CMND_RECEIVEDTA 0x11 103#define CMND_RECEIVEMSG 0x12 104#define CMND_RECEIVEUSP 0x13 105#define CMND_SENDCMD 0x14 106#define CMND_SENDDATA 0x15 107#define CMND_SENDMSG 0x16 108#define CMND_SENDUSP 0x17 109#define CMND_TRANSLATEADDR 0x18 110#define CMND_XFERINFO 0x20 111#define CMND_SBT (1<<7) 112 113#define SBIC_DATA 25 114#define SBIC_ASR 26 115#define ASR_INT (1<<7) 116#define ASR_LCI (1<<6) 117#define ASR_BSY (1<<5) 118#define ASR_CIP (1<<4) 119#define ASR_PE (1<<1) 120#define ASR_DBR (1<<0) 121 122/* DMAC registers */ 123#define DMAC_INIT 0x00 124#define INIT_8BIT (1) 125 126#define DMAC_CHANNEL 0x80 127#define CHANNEL_0 0x00 128#define CHANNEL_1 0x01 129#define CHANNEL_2 0x02 130#define CHANNEL_3 0x03 131 132#define DMAC_TXCNTLO 0x01 133#define DMAC_TXCNTHI 0x81 134#define DMAC_TXADRLO 0x02 135#define DMAC_TXADRMD 0x82 136#define DMAC_TXADRHI 0x03 137 138#define DMAC_DEVCON0 0x04 139#define DEVCON0_AKL (1<<7) 140#define DEVCON0_RQL (1<<6) 141#define DEVCON0_EXW (1<<5) 142#define DEVCON0_ROT (1<<4) 143#define DEVCON0_CMP (1<<3) 144#define DEVCON0_DDMA (1<<2) 145#define DEVCON0_AHLD (1<<1) 146#define DEVCON0_MTM (1<<0) 147 148#define DMAC_DEVCON1 0x84 149#define DEVCON1_WEV (1<<1) 150#define DEVCON1_BHLD (1<<0) 151 152#define DMAC_MODECON 0x05 153#define MODECON_WOED 0x01 154#define MODECON_VERIFY 0x00 155#define MODECON_READ 0x04 156#define MODECON_WRITE 0x08 157#define MODECON_AUTOINIT 0x10 158#define MODECON_ADDRDIR 0x20 159#define MODECON_DEMAND 0x00 160#define MODECON_SINGLE 0x40 161#define MODECON_BLOCK 0x80 162#define MODECON_CASCADE 0xC0 163 164#define DMAC_STATUS 0x85 165#define STATUS_TC0 (1<<0) 166#define STATUS_RQ0 (1<<4) 167 168#define DMAC_TEMPLO 0x06 169#define DMAC_TEMPHI 0x86 170#define DMAC_REQREG 0x07 171#define DMAC_MASKREG 0x87 172#define MASKREG_M0 0x01 173#define MASKREG_M1 0x02 174#define MASKREG_M2 0x04 175#define MASKREG_M3 0x08 176 177/* miscellaneous internal variables */ 178 179#define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0) 180#define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1) 181 182/* 183 * SCSI driver phases 184 */ 185typedef enum { 186 PHASE_IDLE, /* we're not planning on doing anything */ 187 PHASE_CONNECTING, /* connecting to a target */ 188 PHASE_CONNECTED, /* connected to a target */ 189 PHASE_MSGOUT, /* message out to device */ 190 PHASE_RECONNECTED, /* reconnected */ 191 PHASE_COMMANDPAUSED, /* command partly sent */ 192 PHASE_COMMAND, /* command all sent */ 193 PHASE_DATAOUT, /* data out to device */ 194 PHASE_DATAIN, /* data in from device */ 195 PHASE_STATUSIN, /* status in from device */ 196 PHASE_MSGIN, /* message in from device */ 197 PHASE_DONE, /* finished */ 198 PHASE_ABORTED, /* aborted */ 199 PHASE_DISCONNECT, /* disconnecting */ 200} phase_t; 201 202/* 203 * After interrupt, what to do now 204 */ 205typedef enum { 206 INTR_IDLE, /* not expecting another IRQ */ 207 INTR_NEXT_COMMAND, /* start next command */ 208 INTR_PROCESSING, /* interrupt routine still processing */ 209} intr_ret_t; 210 211/* 212 * DMA direction 213 */ 214typedef enum { 215 DMA_OUT, /* DMA from memory to chip */ 216 DMA_IN /* DMA from chip to memory */ 217} dmadir_t; 218 219/* 220 * Synchronous transfer state 221 */ 222typedef enum { /* Synchronous transfer state */ 223 SYNC_ASYNCHRONOUS, /* don't negotiate synchronous transfers*/ 224 SYNC_NEGOCIATE, /* start negotiation */ 225 SYNC_SENT_REQUEST, /* sent SDTR message */ 226 SYNC_COMPLETED, /* received SDTR reply */ 227} syncxfer_t; 228 229/* 230 * Command type 231 */ 232typedef enum { /* command type */ 233 CMD_READ, /* READ_6, READ_10, READ_12 */ 234 CMD_WRITE, /* WRITE_6, WRITE_10, WRITE_12 */ 235 CMD_MISC, /* Others */ 236} cmdtype_t; 237 238/* 239 * Data phase direction 240 */ 241typedef enum { /* Data direction */ 242 DATADIR_IN, /* Data in phase expected */ 243 DATADIR_OUT /* Data out phase expected */ 244} datadir_t; 245 246#include "queue.h" 247#include "msgqueue.h" 248 249#define STATUS_BUFFER_SIZE 32 250/* 251 * This is used to dump the previous states of the SBIC 252 */ 253struct status_entry { 254 unsigned long when; 255 unsigned char ssr; 256 unsigned char ph; 257 unsigned char irq; 258 unsigned char unused; 259}; 260 261#define ADD_STATUS(_q,_ssr,_ph,_irq) \ 262({ \ 263 host->status[(_q)][host->status_ptr[(_q)]].when = jiffies; \ 264 host->status[(_q)][host->status_ptr[(_q)]].ssr = (_ssr); \ 265 host->status[(_q)][host->status_ptr[(_q)]].ph = (_ph); \ 266 host->status[(_q)][host->status_ptr[(_q)]].irq = (_irq); \ 267 host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \ 268}) 269 270/* 271 * AcornSCSI host specific data 272 */ 273typedef struct acornscsi_hostdata { 274 /* miscellaneous */ 275 struct Scsi_Host *host; /* host */ 276 struct scsi_cmnd *SCpnt; /* currently processing command */ 277 struct scsi_cmnd *origSCpnt; /* original connecting command */ 278 void __iomem *base; /* memc base address */ 279 void __iomem *fast; /* fast ioc base address */ 280 281 /* driver information */ 282 struct { 283 unsigned int irq; /* interrupt */ 284 phase_t phase; /* current phase */ 285 286 struct { 287 unsigned char target; /* reconnected target */ 288 unsigned char lun; /* reconnected lun */ 289 unsigned char tag; /* reconnected tag */ 290 } reconnected; 291 292 struct scsi_pointer SCp; /* current commands data pointer */ 293 294 MsgQueue_t msgs; 295 296 unsigned short last_message; /* last message to be sent */ 297 unsigned char disconnectable:1; /* this command can be disconnected */ 298 } scsi; 299 300 /* statistics information */ 301 struct { 302 unsigned int queues; 303 unsigned int removes; 304 unsigned int fins; 305 unsigned int reads; 306 unsigned int writes; 307 unsigned int miscs; 308 unsigned int disconnects; 309 unsigned int aborts; 310 unsigned int resets; 311 } stats; 312 313 /* queue handling */ 314 struct { 315 Queue_t issue; /* issue queue */ 316 Queue_t disconnected; /* disconnected command queue */ 317 } queues; 318 319 /* per-device info */ 320 struct { 321 unsigned char sync_xfer; /* synchronous transfer (SBIC value) */ 322 syncxfer_t sync_state; /* sync xfer negotiation state */ 323 unsigned char disconnect_ok:1; /* device can disconnect */ 324 } device[8]; 325 unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */ 326 327 /* DMA info */ 328 struct { 329 unsigned int free_addr; /* next free address */ 330 unsigned int start_addr; /* start address of current transfer */ 331 dmadir_t direction; /* dma direction */ 332 unsigned int transferred; /* number of bytes transferred */ 333 unsigned int xfer_start; /* scheduled DMA transfer start */ 334 unsigned int xfer_length; /* scheduled DMA transfer length */ 335 char *xfer_ptr; /* pointer to area */ 336 unsigned char xfer_required:1; /* set if we need to transfer something */ 337 unsigned char xfer_setup:1; /* set if DMA is setup */ 338 unsigned char xfer_done:1; /* set if DMA reached end of BH list */ 339 } dma; 340 341 /* card info */ 342 struct { 343 unsigned char page_reg; /* current setting of page reg */ 344 } card; 345 346 unsigned char status_ptr[9]; 347 struct status_entry status[9][STATUS_BUFFER_SIZE]; 348} AS_Host; 349 350#endif /* ACORNSCSI_H */