dpti.h (11382B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/*************************************************************************** 3 dpti.h - description 4 ------------------- 5 begin : Thu Sep 7 2000 6 copyright : (C) 2001 by Adaptec 7 8 See Documentation/scsi/dpti.rst for history, notes, license info 9 and credits 10 ***************************************************************************/ 11 12/*************************************************************************** 13 * * 14 * * 15 ***************************************************************************/ 16 17#ifndef _DPT_H 18#define _DPT_H 19 20#define MAX_TO_IOP_MESSAGES (255) 21#define MAX_FROM_IOP_MESSAGES (255) 22 23 24/* 25 * SCSI interface function Prototypes 26 */ 27 28static int adpt_detect(struct scsi_host_template * sht); 29static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd); 30static int adpt_abort(struct scsi_cmnd * cmd); 31static int adpt_reset(struct scsi_cmnd* cmd); 32static int adpt_slave_configure(struct scsi_device *); 33 34static const char *adpt_info(struct Scsi_Host *pSHost); 35static int adpt_bios_param(struct scsi_device * sdev, struct block_device *dev, 36 sector_t, int geom[]); 37 38static int adpt_bus_reset(struct scsi_cmnd* cmd); 39static int adpt_device_reset(struct scsi_cmnd* cmd); 40 41 42/* 43 * struct scsi_host_template (see scsi/scsi_host.h) 44 */ 45 46#define DPT_DRIVER_NAME "Adaptec I2O RAID" 47 48#ifndef HOSTS_C 49 50#include "dpt/sys_info.h" 51#include <linux/wait.h> 52#include "dpt/dpti_i2o.h" 53#include "dpt/dpti_ioctl.h" 54 55#define DPT_I2O_VERSION "2.4 Build 5go" 56#define DPT_VERSION 2 57#define DPT_REVISION '4' 58#define DPT_SUBREVISION '5' 59#define DPT_BETA "" 60#define DPT_MONTH 8 61#define DPT_DAY 7 62#define DPT_YEAR (2001-1980) 63 64#define DPT_DRIVER "dpt_i2o" 65#define DPTI_I2O_MAJOR (151) 66#define DPT_ORGANIZATION_ID (0x1B) /* For Private Messages */ 67#define DPTI_MAX_HBA (16) 68#define MAX_CHANNEL (5) // Maximum Channel # Supported 69#define MAX_ID (128) // Maximum Target ID Supported 70 71/* Sizes in 4 byte words */ 72#define REPLY_FRAME_SIZE (17) 73#define MAX_MESSAGE_SIZE (128) 74#define SG_LIST_ELEMENTS (56) 75 76#define EMPTY_QUEUE 0xffffffff 77#define I2O_INTERRUPT_PENDING_B (0x08) 78 79#define PCI_DPT_VENDOR_ID (0x1044) // DPT PCI Vendor ID 80#define PCI_DPT_DEVICE_ID (0xA501) // DPT PCI I2O Device ID 81#define PCI_DPT_RAPTOR_DEVICE_ID (0xA511) 82 83/* Debugging macro from Linux Device Drivers - Rubini */ 84#undef PDEBUG 85#ifdef DEBUG 86//TODO add debug level switch 87# define PDEBUG(fmt, args...) printk(KERN_DEBUG "dpti: " fmt, ##args) 88# define PDEBUGV(fmt, args...) printk(KERN_DEBUG "dpti: " fmt, ##args) 89#else 90# define PDEBUG(fmt, args...) /* not debugging: nothing */ 91# define PDEBUGV(fmt, args...) /* not debugging: nothing */ 92#endif 93 94#define PERROR(fmt, args...) printk(KERN_ERR fmt, ##args) 95#define PWARN(fmt, args...) printk(KERN_WARNING fmt, ##args) 96#define PINFO(fmt, args...) printk(KERN_INFO fmt, ##args) 97#define PCRIT(fmt, args...) printk(KERN_CRIT fmt, ##args) 98 99#define SHUTDOWN_SIGS (sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM)) 100 101// Command timeouts 102#define FOREVER (0) 103#define TMOUT_INQUIRY (20) 104#define TMOUT_FLUSH (360/45) 105#define TMOUT_ABORT (30) 106#define TMOUT_SCSI (300) 107#define TMOUT_IOPRESET (360) 108#define TMOUT_GETSTATUS (15) 109#define TMOUT_INITOUTBOUND (15) 110#define TMOUT_LCT (360) 111 112 113#define I2O_SCSI_DEVICE_DSC_MASK 0x00FF 114 115#define I2O_DETAIL_STATUS_UNSUPPORTED_FUNCTION 0x000A 116 117#define I2O_SCSI_DSC_MASK 0xFF00 118#define I2O_SCSI_DSC_SUCCESS 0x0000 119#define I2O_SCSI_DSC_REQUEST_ABORTED 0x0200 120#define I2O_SCSI_DSC_UNABLE_TO_ABORT 0x0300 121#define I2O_SCSI_DSC_COMPLETE_WITH_ERROR 0x0400 122#define I2O_SCSI_DSC_ADAPTER_BUSY 0x0500 123#define I2O_SCSI_DSC_REQUEST_INVALID 0x0600 124#define I2O_SCSI_DSC_PATH_INVALID 0x0700 125#define I2O_SCSI_DSC_DEVICE_NOT_PRESENT 0x0800 126#define I2O_SCSI_DSC_UNABLE_TO_TERMINATE 0x0900 127#define I2O_SCSI_DSC_SELECTION_TIMEOUT 0x0A00 128#define I2O_SCSI_DSC_COMMAND_TIMEOUT 0x0B00 129#define I2O_SCSI_DSC_MR_MESSAGE_RECEIVED 0x0D00 130#define I2O_SCSI_DSC_SCSI_BUS_RESET 0x0E00 131#define I2O_SCSI_DSC_PARITY_ERROR_FAILURE 0x0F00 132#define I2O_SCSI_DSC_AUTOSENSE_FAILED 0x1000 133#define I2O_SCSI_DSC_NO_ADAPTER 0x1100 134#define I2O_SCSI_DSC_DATA_OVERRUN 0x1200 135#define I2O_SCSI_DSC_UNEXPECTED_BUS_FREE 0x1300 136#define I2O_SCSI_DSC_SEQUENCE_FAILURE 0x1400 137#define I2O_SCSI_DSC_REQUEST_LENGTH_ERROR 0x1500 138#define I2O_SCSI_DSC_PROVIDE_FAILURE 0x1600 139#define I2O_SCSI_DSC_BDR_MESSAGE_SENT 0x1700 140#define I2O_SCSI_DSC_REQUEST_TERMINATED 0x1800 141#define I2O_SCSI_DSC_IDE_MESSAGE_SENT 0x3300 142#define I2O_SCSI_DSC_RESOURCE_UNAVAILABLE 0x3400 143#define I2O_SCSI_DSC_UNACKNOWLEDGED_EVENT 0x3500 144#define I2O_SCSI_DSC_MESSAGE_RECEIVED 0x3600 145#define I2O_SCSI_DSC_INVALID_CDB 0x3700 146#define I2O_SCSI_DSC_LUN_INVALID 0x3800 147#define I2O_SCSI_DSC_SCSI_TID_INVALID 0x3900 148#define I2O_SCSI_DSC_FUNCTION_UNAVAILABLE 0x3A00 149#define I2O_SCSI_DSC_NO_NEXUS 0x3B00 150#define I2O_SCSI_DSC_SCSI_IID_INVALID 0x3C00 151#define I2O_SCSI_DSC_CDB_RECEIVED 0x3D00 152#define I2O_SCSI_DSC_LUN_ALREADY_ENABLED 0x3E00 153#define I2O_SCSI_DSC_BUS_BUSY 0x3F00 154#define I2O_SCSI_DSC_QUEUE_FROZEN 0x4000 155 156 157#ifndef TRUE 158#define TRUE 1 159#define FALSE 0 160#endif 161 162#define HBA_FLAGS_INSTALLED_B 0x00000001 // Adapter Was Installed 163#define HBA_FLAGS_BLINKLED_B 0x00000002 // Adapter In Blink LED State 164#define HBA_FLAGS_IN_RESET 0x00000040 /* in reset */ 165#define HBA_HOSTRESET_FAILED 0x00000080 /* adpt_resethost failed */ 166 167 168// Device state flags 169#define DPTI_DEV_ONLINE 0x00 170#define DPTI_DEV_UNSCANNED 0x01 171#define DPTI_DEV_RESET 0x02 172#define DPTI_DEV_OFFLINE 0x04 173 174 175struct adpt_device { 176 struct adpt_device* next_lun; 177 u32 flags; 178 u32 type; 179 u32 capacity; 180 u32 block_size; 181 u8 scsi_channel; 182 u8 scsi_id; 183 u64 scsi_lun; 184 u8 state; 185 u16 tid; 186 struct i2o_device* pI2o_dev; 187 struct scsi_device *pScsi_dev; 188}; 189 190struct adpt_channel { 191 struct adpt_device* device[MAX_ID]; /* used as an array of 128 scsi ids */ 192 u8 scsi_id; 193 u8 type; 194 u16 tid; 195 u32 state; 196 struct i2o_device* pI2o_dev; 197}; 198 199// HBA state flags 200#define DPTI_STATE_RESET (0x01) 201 202typedef struct _adpt_hba { 203 struct _adpt_hba *next; 204 struct pci_dev *pDev; 205 struct Scsi_Host *host; 206 u32 state; 207 spinlock_t state_lock; 208 int unit; 209 int host_no; /* SCSI host number */ 210 u8 initialized; 211 u8 in_use; /* is the management node open*/ 212 213 char name[32]; 214 char detail[55]; 215 216 void __iomem *base_addr_virt; 217 void __iomem *msg_addr_virt; 218 ulong base_addr_phys; 219 void __iomem *post_port; 220 void __iomem *reply_port; 221 void __iomem *irq_mask; 222 u16 post_count; 223 u32 post_fifo_size; 224 u32 reply_fifo_size; 225 u32* reply_pool; 226 dma_addr_t reply_pool_pa; 227 u32 sg_tablesize; // Scatter/Gather List Size. 228 u8 top_scsi_channel; 229 u8 top_scsi_id; 230 u64 top_scsi_lun; 231 u8 dma64; 232 233 i2o_status_block* status_block; 234 dma_addr_t status_block_pa; 235 i2o_hrt* hrt; 236 dma_addr_t hrt_pa; 237 i2o_lct* lct; 238 dma_addr_t lct_pa; 239 uint lct_size; 240 struct i2o_device* devices; 241 struct adpt_channel channel[MAX_CHANNEL]; 242 struct proc_dir_entry* proc_entry; /* /proc dir */ 243 244 void __iomem *FwDebugBuffer_P; // Virtual Address Of FW Debug Buffer 245 u32 FwDebugBufferSize; // FW Debug Buffer Size In Bytes 246 void __iomem *FwDebugStrLength_P;// Virtual Addr Of FW Debug String Len 247 void __iomem *FwDebugFlags_P; // Virtual Address Of FW Debug Flags 248 void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED 249 void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED 250 u32 FwDebugFlags; 251 u32 *ioctl_reply_context[4]; 252} adpt_hba; 253 254struct sg_simple_element { 255 u32 flag_count; 256 u32 addr_bus; 257}; 258 259/* 260 * Function Prototypes 261 */ 262 263static void adpt_i2o_sys_shutdown(void); 264static int adpt_init(void); 265static int adpt_i2o_build_sys_table(void); 266static irqreturn_t adpt_isr(int irq, void *dev_id); 267 268static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d); 269static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, 270 int group, int field, void *buf, int buflen); 271#ifdef DEBUG 272static const char *adpt_i2o_get_class_name(int class); 273#endif 274static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 275 void *opblk, dma_addr_t opblk_pa, int oplen, 276 void *resblk, dma_addr_t resblk_pa, int reslen); 277static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout); 278static int adpt_i2o_lct_get(adpt_hba* pHba); 279static int adpt_i2o_parse_lct(adpt_hba* pHba); 280static int adpt_i2o_activate_hba(adpt_hba* pHba); 281static int adpt_i2o_enable_hba(adpt_hba* pHba); 282static int adpt_i2o_install_device(adpt_hba* pHba, struct i2o_device *d); 283static s32 adpt_i2o_post_this(adpt_hba* pHba, u32* data, int len); 284static s32 adpt_i2o_quiesce_hba(adpt_hba* pHba); 285static s32 adpt_i2o_status_get(adpt_hba* pHba); 286static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba); 287static s32 adpt_i2o_hrt_get(adpt_hba* pHba); 288static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice); 289static void adpt_i2o_scsi_complete(void __iomem *reply, struct scsi_cmnd *cmd); 290static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht); 291static s32 adpt_hba_reset(adpt_hba* pHba); 292static s32 adpt_i2o_reset_hba(adpt_hba* pHba); 293static s32 adpt_rescan(adpt_hba* pHba); 294static s32 adpt_i2o_reparse_lct(adpt_hba* pHba); 295static s32 adpt_send_nop(adpt_hba*pHba,u32 m); 296static void adpt_i2o_delete_hba(adpt_hba* pHba); 297static void adpt_inquiry(adpt_hba* pHba); 298static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u64 lun); 299static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ; 300static int adpt_i2o_online_hba(adpt_hba* pHba); 301static void adpt_i2o_post_wait_complete(u32, int); 302static int adpt_i2o_systab_send(adpt_hba* pHba); 303 304static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg); 305static int adpt_open(struct inode *inode, struct file *file); 306static int adpt_close(struct inode *inode, struct file *file); 307 308 309#ifdef UARTDELAY 310static void adpt_delay(int millisec); 311#endif 312 313#define PRINT_BUFFER_SIZE 512 314 315#define HBA_FLAGS_DBG_FLAGS_MASK 0xffff0000 // Mask for debug flags 316#define HBA_FLAGS_DBG_KERNEL_PRINT_B 0x00010000 // Kernel Debugger Print 317#define HBA_FLAGS_DBG_FW_PRINT_B 0x00020000 // Firmware Debugger Print 318#define HBA_FLAGS_DBG_FUNCTION_ENTRY_B 0x00040000 // Function Entry Point 319#define HBA_FLAGS_DBG_FUNCTION_EXIT_B 0x00080000 // Function Exit 320#define HBA_FLAGS_DBG_ERROR_B 0x00100000 // Error Conditions 321#define HBA_FLAGS_DBG_INIT_B 0x00200000 // Init Prints 322#define HBA_FLAGS_DBG_OS_COMMANDS_B 0x00400000 // OS Command Info 323#define HBA_FLAGS_DBG_SCAN_B 0x00800000 // Device Scan 324 325#define FW_DEBUG_STR_LENGTH_OFFSET 0 326#define FW_DEBUG_FLAGS_OFFSET 4 327#define FW_DEBUG_BLED_OFFSET 8 328 329#define FW_DEBUG_FLAGS_NO_HEADERS_B 0x01 330#endif /* !HOSTS_C */ 331#endif /* _DPT_H */