mpi2.h (50454B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 4 * 5 * 6 * Name: mpi2.h 7 * Title: MPI Message independent structures and definitions 8 * including System Interface Register Set and 9 * scatter/gather formats. 10 * Creation Date: June 21, 2006 11 * 12 * mpi2.h Version: 02.00.54 13 * 14 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 15 * prefix are for use only on MPI v2.5 products, and must not be used 16 * with MPI v2.0 products. Unless otherwise noted, names beginning with 17 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 18 * 19 * Version History 20 * --------------- 21 * 22 * Date Version Description 23 * -------- -------- ------------------------------------------------------ 24 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 25 * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. 26 * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. 27 * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. 28 * Moved ReplyPostHostIndex register to offset 0x6C of the 29 * MPI2_SYSTEM_INTERFACE_REGS and modified the define for 30 * MPI2_REPLY_POST_HOST_INDEX_OFFSET. 31 * Added union of request descriptors. 32 * Added union of reply descriptors. 33 * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. 34 * Added define for MPI2_VERSION_02_00. 35 * Fixed the size of the FunctionDependent5 field in the 36 * MPI2_DEFAULT_REPLY structure. 37 * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. 38 * Removed the MPI-defined Fault Codes and extended the 39 * product specific codes up to 0xEFFF. 40 * Added a sixth key value for the WriteSequence register 41 * and changed the flush value to 0x0. 42 * Added message function codes for Diagnostic Buffer Post 43 * and Diagnsotic Release. 44 * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED 45 * Moved MPI2_VERSION_UNION from mpi2_ioc.h. 46 * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. 47 * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. 48 * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. 49 * Added #defines for marking a reply descriptor as unused. 50 * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. 51 * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. 52 * Moved LUN field defines from mpi2_init.h. 53 * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. 54 * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. 55 * In all request and reply descriptors, replaced VF_ID 56 * field with MSIxIndex field. 57 * Removed DevHandle field from 58 * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those 59 * bytes reserved. 60 * Added RAID Accelerator functionality. 61 * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. 62 * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. 63 * Added MSI-x index mask and shift for Reply Post Host 64 * Index register. 65 * Added function code for Host Based Discovery Action. 66 * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. 67 * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. 68 * Added defines for product-specific range of message 69 * function codes, 0xF0 to 0xFF. 70 * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. 71 * Added alternative defines for the SGE Direction bit. 72 * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. 73 * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. 74 * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. 75 * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. 76 * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. 77 * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. 78 * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. 79 * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. 80 * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. 81 * Incorporating additions for MPI v2.5. 82 * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. 83 * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. 84 * Added Hard Reset delay timings. 85 * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. 86 * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. 87 * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. 88 * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT. 89 * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET. 90 * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT. 91 * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. 92 * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. 93 * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. 94 * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT 95 * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. 96 * 11-18-14 02.00.36 Updated copyright information. 97 * Bumped MPI2_HEADER_VERSION_UNIT. 98 * 03-16-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT. 99 * Added Scratchpad registers to 100 * MPI2_SYSTEM_INTERFACE_REGS. 101 * Added MPI2_DIAG_SBR_RELOAD. 102 * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT. 103 * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT. 104 * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. 105 * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT 106 * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT 107 * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines 108 * to be unique within first 32 characters. 109 * Removed AHCI support. 110 * Removed SOP support. 111 * Bumped MPI2_HEADER_VERSION_UNIT. 112 * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT. 113 * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT. 114 * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT. 115 * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT. 116 * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT. 117 * 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT. 118 * 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT. 119 * 07-22-18 02.00.51 Added SECURE_BOOT define. 120 * Bumped MPI2_HEADER_VERSION_UNIT 121 * 08-15-18 02.00.52 Bumped MPI2_HEADER_VERSION_UNIT. 122 * 08-28-18 02.00.53 Bumped MPI2_HEADER_VERSION_UNIT. 123 * Added MPI2_IOCSTATUS_FAILURE 124 * 12-17-18 02.00.54 Bumped MPI2_HEADER_VERSION_UNIT 125 * 06-24-19 02.00.55 Bumped MPI2_HEADER_VERSION_UNIT 126 * 08-01-19 02.00.56 Bumped MPI2_HEADER_VERSION_UNIT 127 * 10-02-19 02.00.57 Bumped MPI2_HEADER_VERSION_UNIT 128 * -------------------------------------------------------------------------- 129 */ 130 131#ifndef MPI2_H 132#define MPI2_H 133 134/***************************************************************************** 135* 136* MPI Version Definitions 137* 138*****************************************************************************/ 139 140#define MPI2_VERSION_MAJOR_MASK (0xFF00) 141#define MPI2_VERSION_MAJOR_SHIFT (8) 142#define MPI2_VERSION_MINOR_MASK (0x00FF) 143#define MPI2_VERSION_MINOR_SHIFT (0) 144 145/*major version for all MPI v2.x */ 146#define MPI2_VERSION_MAJOR (0x02) 147 148/*minor version for MPI v2.0 compatible products */ 149#define MPI2_VERSION_MINOR (0x00) 150#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ 151 MPI2_VERSION_MINOR) 152#define MPI2_VERSION_02_00 (0x0200) 153 154/*minor version for MPI v2.5 compatible products */ 155#define MPI25_VERSION_MINOR (0x05) 156#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ 157 MPI25_VERSION_MINOR) 158#define MPI2_VERSION_02_05 (0x0205) 159 160/*minor version for MPI v2.6 compatible products */ 161#define MPI26_VERSION_MINOR (0x06) 162#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ 163 MPI26_VERSION_MINOR) 164#define MPI2_VERSION_02_06 (0x0206) 165 166 167/* Unit and Dev versioning for this MPI header set */ 168#define MPI2_HEADER_VERSION_UNIT (0x39) 169#define MPI2_HEADER_VERSION_DEV (0x00) 170#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) 171#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) 172#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) 173#define MPI2_HEADER_VERSION_DEV_SHIFT (0) 174#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \ 175 MPI2_HEADER_VERSION_DEV) 176 177/***************************************************************************** 178* 179* IOC State Definitions 180* 181*****************************************************************************/ 182 183#define MPI2_IOC_STATE_RESET (0x00000000) 184#define MPI2_IOC_STATE_READY (0x10000000) 185#define MPI2_IOC_STATE_OPERATIONAL (0x20000000) 186#define MPI2_IOC_STATE_FAULT (0x40000000) 187#define MPI2_IOC_STATE_COREDUMP (0x50000000) 188 189#define MPI2_IOC_STATE_MASK (0xF0000000) 190#define MPI2_IOC_STATE_SHIFT (28) 191 192/*Fault state range for prodcut specific codes */ 193#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000) 194#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF) 195 196/***************************************************************************** 197* 198* System Interface Register Definitions 199* 200*****************************************************************************/ 201 202typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS { 203 U32 Doorbell; /*0x00 */ 204 U32 WriteSequence; /*0x04 */ 205 U32 HostDiagnostic; /*0x08 */ 206 U32 Reserved1; /*0x0C */ 207 U32 DiagRWData; /*0x10 */ 208 U32 DiagRWAddressLow; /*0x14 */ 209 U32 DiagRWAddressHigh; /*0x18 */ 210 U32 Reserved2[5]; /*0x1C */ 211 U32 HostInterruptStatus; /*0x30 */ 212 U32 HostInterruptMask; /*0x34 */ 213 U32 DCRData; /*0x38 */ 214 U32 DCRAddress; /*0x3C */ 215 U32 Reserved3[2]; /*0x40 */ 216 U32 ReplyFreeHostIndex; /*0x48 */ 217 U32 Reserved4[8]; /*0x4C */ 218 U32 ReplyPostHostIndex; /*0x6C */ 219 U32 Reserved5; /*0x70 */ 220 U32 HCBSize; /*0x74 */ 221 U32 HCBAddressLow; /*0x78 */ 222 U32 HCBAddressHigh; /*0x7C */ 223 U32 Reserved6[12]; /*0x80 */ 224 U32 Scratchpad[4]; /*0xB0 */ 225 U32 RequestDescriptorPostLow; /*0xC0 */ 226 U32 RequestDescriptorPostHigh; /*0xC4 */ 227 U32 AtomicRequestDescriptorPost;/*0xC8 */ 228 U32 Reserved7[13]; /*0xCC */ 229} MPI2_SYSTEM_INTERFACE_REGS, 230 *PTR_MPI2_SYSTEM_INTERFACE_REGS, 231 Mpi2SystemInterfaceRegs_t, 232 *pMpi2SystemInterfaceRegs_t; 233 234/* 235 *Defines for working with the Doorbell register. 236 */ 237#define MPI2_DOORBELL_OFFSET (0x00000000) 238 239/*IOC --> System values */ 240#define MPI2_DOORBELL_USED (0x08000000) 241#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000) 242#define MPI2_DOORBELL_WHO_INIT_SHIFT (24) 243#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF) 244#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF) 245 246/*System --> IOC values */ 247#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000) 248#define MPI2_DOORBELL_FUNCTION_SHIFT (24) 249#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) 250#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16) 251 252/* 253 *Defines for the WriteSequence register 254 */ 255#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004) 256#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F) 257#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0) 258#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF) 259#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4) 260#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB) 261#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2) 262#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7) 263#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD) 264 265/* 266 *Defines for the HostDiagnostic register 267 */ 268#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) 269 270#define MPI26_DIAG_SECURE_BOOT (0x80000000) 271 272#define MPI2_DIAG_SBR_RELOAD (0x00002000) 273 274#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) 275#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) 276#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) 277 278/* Defines for V7A/V7R HostDiagnostic Register */ 279#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000) 280#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800) 281#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000) 282#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800) 283 284#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) 285#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) 286#define MPI2_DIAG_HCB_MODE (0x00000100) 287#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080) 288#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040) 289#define MPI2_DIAG_RESET_HISTORY (0x00000020) 290#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010) 291#define MPI2_DIAG_RESET_ADAPTER (0x00000004) 292#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002) 293 294/* 295 *Offsets for DiagRWData and address 296 */ 297#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010) 298#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014) 299#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018) 300 301/* 302 *Defines for the HostInterruptStatus register 303 */ 304#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) 305#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000) 306#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS 307#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000) 308#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008) 309#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001) 310#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS 311 312/* 313 *Defines for the HostInterruptMask register 314 */ 315#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034) 316#define MPI2_HIM_RESET_IRQ_MASK (0x40000000) 317#define MPI2_HIM_REPLY_INT_MASK (0x00000008) 318#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK 319#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001) 320#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK 321 322/* 323 *Offsets for DCRData and address 324 */ 325#define MPI2_DCR_DATA_OFFSET (0x00000038) 326#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C) 327 328/* 329 *Offset for the Reply Free Queue 330 */ 331#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) 332 333/* 334 *Defines for the Reply Descriptor Post Queue 335 */ 336#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) 337#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF) 338#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000) 339#define MPI2_RPHI_MSIX_INDEX_SHIFT (24) 340#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/ 341 342 343/* 344 *Defines for the HCBSize and address 345 */ 346#define MPI2_HCB_SIZE_OFFSET (0x00000074) 347#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000) 348#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001) 349 350#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078) 351#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) 352 353/* 354 *Offsets for the Scratchpad registers 355 */ 356#define MPI26_SCRATCHPAD0_OFFSET (0x000000B0) 357#define MPI26_SCRATCHPAD1_OFFSET (0x000000B4) 358#define MPI26_SCRATCHPAD2_OFFSET (0x000000B8) 359#define MPI26_SCRATCHPAD3_OFFSET (0x000000BC) 360 361/* 362 *Offsets for the Request Descriptor Post Queue 363 */ 364#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) 365#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) 366#define MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET (0x000000C8) 367 368/*Hard Reset delay timings */ 369#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000) 370#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000) 371#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000) 372 373/***************************************************************************** 374* 375* Message Descriptors 376* 377*****************************************************************************/ 378 379/*Request Descriptors */ 380 381/*Default Request Descriptor */ 382typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR { 383 U8 RequestFlags; /*0x00 */ 384 U8 MSIxIndex; /*0x01 */ 385 U16 SMID; /*0x02 */ 386 U16 LMID; /*0x04 */ 387 U16 DescriptorTypeDependent; /*0x06 */ 388} MPI2_DEFAULT_REQUEST_DESCRIPTOR, 389 *PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR, 390 Mpi2DefaultRequestDescriptor_t, 391 *pMpi2DefaultRequestDescriptor_t; 392 393/*defines for the RequestFlags field */ 394#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x1E) 395#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT (1) 396#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) 397#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) 398#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) 399#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) 400#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) 401#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C) 402#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10) 403 404#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) 405 406/*High Priority Request Descriptor */ 407typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR { 408 U8 RequestFlags; /*0x00 */ 409 U8 MSIxIndex; /*0x01 */ 410 U16 SMID; /*0x02 */ 411 U16 LMID; /*0x04 */ 412 U16 Reserved1; /*0x06 */ 413} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, 414 *PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, 415 Mpi2HighPriorityRequestDescriptor_t, 416 *pMpi2HighPriorityRequestDescriptor_t; 417 418/*SCSI IO Request Descriptor */ 419typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR { 420 U8 RequestFlags; /*0x00 */ 421 U8 MSIxIndex; /*0x01 */ 422 U16 SMID; /*0x02 */ 423 U16 LMID; /*0x04 */ 424 U16 DevHandle; /*0x06 */ 425} MPI2_SCSI_IO_REQUEST_DESCRIPTOR, 426 *PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR, 427 Mpi2SCSIIORequestDescriptor_t, 428 *pMpi2SCSIIORequestDescriptor_t; 429 430/*SCSI Target Request Descriptor */ 431typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR { 432 U8 RequestFlags; /*0x00 */ 433 U8 MSIxIndex; /*0x01 */ 434 U16 SMID; /*0x02 */ 435 U16 LMID; /*0x04 */ 436 U16 IoIndex; /*0x06 */ 437} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, 438 *PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, 439 Mpi2SCSITargetRequestDescriptor_t, 440 *pMpi2SCSITargetRequestDescriptor_t; 441 442/*RAID Accelerator Request Descriptor */ 443typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR { 444 U8 RequestFlags; /*0x00 */ 445 U8 MSIxIndex; /*0x01 */ 446 U16 SMID; /*0x02 */ 447 U16 LMID; /*0x04 */ 448 U16 Reserved; /*0x06 */ 449} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, 450 *PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, 451 Mpi2RAIDAcceleratorRequestDescriptor_t, 452 *pMpi2RAIDAcceleratorRequestDescriptor_t; 453 454/*Fast Path SCSI IO Request Descriptor */ 455typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR 456 MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR, 457 *PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR, 458 Mpi25FastPathSCSIIORequestDescriptor_t, 459 *pMpi25FastPathSCSIIORequestDescriptor_t; 460 461/*PCIe Encapsulated Request Descriptor */ 462typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR 463 MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR, 464 *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR, 465 Mpi26PCIeEncapsulatedRequestDescriptor_t, 466 *pMpi26PCIeEncapsulatedRequestDescriptor_t; 467 468/*union of Request Descriptors */ 469typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { 470 MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; 471 MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; 472 MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; 473 MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; 474 MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator; 475 MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO; 476 MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated; 477 U64 Words; 478} MPI2_REQUEST_DESCRIPTOR_UNION, 479 *PTR_MPI2_REQUEST_DESCRIPTOR_UNION, 480 Mpi2RequestDescriptorUnion_t, 481 *pMpi2RequestDescriptorUnion_t; 482 483/*Atomic Request Descriptors */ 484 485/* 486 * All Atomic Request Descriptors have the same format, so the following 487 * structure is used for all Atomic Request Descriptors: 488 * Atomic Default Request Descriptor 489 * Atomic High Priority Request Descriptor 490 * Atomic SCSI IO Request Descriptor 491 * Atomic SCSI Target Request Descriptor 492 * Atomic RAID Accelerator Request Descriptor 493 * Atomic Fast Path SCSI IO Request Descriptor 494 * Atomic PCIe Encapsulated Request Descriptor 495 */ 496 497/*Atomic Request Descriptor */ 498typedef struct _MPI26_ATOMIC_REQUEST_DESCRIPTOR { 499 U8 RequestFlags; /* 0x00 */ 500 U8 MSIxIndex; /* 0x01 */ 501 U16 SMID; /* 0x02 */ 502} MPI26_ATOMIC_REQUEST_DESCRIPTOR, 503 *PTR_MPI26_ATOMIC_REQUEST_DESCRIPTOR, 504 Mpi26AtomicRequestDescriptor_t, 505 *pMpi26AtomicRequestDescriptor_t; 506 507/*for the RequestFlags field, use the same 508 *defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR 509 */ 510 511/*Reply Descriptors */ 512 513/*Default Reply Descriptor */ 514typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR { 515 U8 ReplyFlags; /*0x00 */ 516 U8 MSIxIndex; /*0x01 */ 517 U16 DescriptorTypeDependent1; /*0x02 */ 518 U32 DescriptorTypeDependent2; /*0x04 */ 519} MPI2_DEFAULT_REPLY_DESCRIPTOR, 520 *PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, 521 Mpi2DefaultReplyDescriptor_t, 522 *pMpi2DefaultReplyDescriptor_t; 523 524/*defines for the ReplyFlags field */ 525#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) 526#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) 527#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) 528#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) 529#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) 530#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) 531#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06) 532#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08) 533#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) 534 535/*values for marking a reply descriptor as unused */ 536#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) 537#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) 538 539/*Address Reply Descriptor */ 540typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR { 541 U8 ReplyFlags; /*0x00 */ 542 U8 MSIxIndex; /*0x01 */ 543 U16 SMID; /*0x02 */ 544 U32 ReplyFrameAddress; /*0x04 */ 545} MPI2_ADDRESS_REPLY_DESCRIPTOR, 546 *PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, 547 Mpi2AddressReplyDescriptor_t, 548 *pMpi2AddressReplyDescriptor_t; 549 550#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00) 551 552/*SCSI IO Success Reply Descriptor */ 553typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR { 554 U8 ReplyFlags; /*0x00 */ 555 U8 MSIxIndex; /*0x01 */ 556 U16 SMID; /*0x02 */ 557 U16 TaskTag; /*0x04 */ 558 U16 Reserved1; /*0x06 */ 559} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, 560 *PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, 561 Mpi2SCSIIOSuccessReplyDescriptor_t, 562 *pMpi2SCSIIOSuccessReplyDescriptor_t; 563 564/*TargetAssist Success Reply Descriptor */ 565typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR { 566 U8 ReplyFlags; /*0x00 */ 567 U8 MSIxIndex; /*0x01 */ 568 U16 SMID; /*0x02 */ 569 U8 SequenceNumber; /*0x04 */ 570 U8 Reserved1; /*0x05 */ 571 U16 IoIndex; /*0x06 */ 572} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, 573 *PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, 574 Mpi2TargetAssistSuccessReplyDescriptor_t, 575 *pMpi2TargetAssistSuccessReplyDescriptor_t; 576 577/*Target Command Buffer Reply Descriptor */ 578typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { 579 U8 ReplyFlags; /*0x00 */ 580 U8 MSIxIndex; /*0x01 */ 581 U8 VP_ID; /*0x02 */ 582 U8 Flags; /*0x03 */ 583 U16 InitiatorDevHandle; /*0x04 */ 584 U16 IoIndex; /*0x06 */ 585} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, 586 *PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, 587 Mpi2TargetCommandBufferReplyDescriptor_t, 588 *pMpi2TargetCommandBufferReplyDescriptor_t; 589 590/*defines for Flags field */ 591#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) 592 593/*RAID Accelerator Success Reply Descriptor */ 594typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR { 595 U8 ReplyFlags; /*0x00 */ 596 U8 MSIxIndex; /*0x01 */ 597 U16 SMID; /*0x02 */ 598 U32 Reserved; /*0x04 */ 599} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, 600 *PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, 601 Mpi2RAIDAcceleratorSuccessReplyDescriptor_t, 602 *pMpi2RAIDAcceleratorSuccessReplyDescriptor_t; 603 604/*Fast Path SCSI IO Success Reply Descriptor */ 605typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR 606 MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, 607 *PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, 608 Mpi25FastPathSCSIIOSuccessReplyDescriptor_t, 609 *pMpi25FastPathSCSIIOSuccessReplyDescriptor_t; 610 611/*PCIe Encapsulated Success Reply Descriptor */ 612typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR 613 MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR, 614 *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR, 615 Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t, 616 *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t; 617 618/*union of Reply Descriptors */ 619typedef union _MPI2_REPLY_DESCRIPTORS_UNION { 620 MPI2_DEFAULT_REPLY_DESCRIPTOR Default; 621 MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; 622 MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; 623 MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; 624 MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; 625 MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; 626 MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess; 627 MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR 628 PCIeEncapsulatedSuccess; 629 U64 Words; 630} MPI2_REPLY_DESCRIPTORS_UNION, 631 *PTR_MPI2_REPLY_DESCRIPTORS_UNION, 632 Mpi2ReplyDescriptorsUnion_t, 633 *pMpi2ReplyDescriptorsUnion_t; 634 635/***************************************************************************** 636* 637* Message Functions 638* 639*****************************************************************************/ 640 641#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) 642#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) 643#define MPI2_FUNCTION_IOC_INIT (0x02) 644#define MPI2_FUNCTION_IOC_FACTS (0x03) 645#define MPI2_FUNCTION_CONFIG (0x04) 646#define MPI2_FUNCTION_PORT_FACTS (0x05) 647#define MPI2_FUNCTION_PORT_ENABLE (0x06) 648#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) 649#define MPI2_FUNCTION_EVENT_ACK (0x08) 650#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) 651#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) 652#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) 653#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) 654#define MPI2_FUNCTION_FW_UPLOAD (0x12) 655#define MPI2_FUNCTION_RAID_ACTION (0x15) 656#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) 657#define MPI2_FUNCTION_TOOLBOX (0x17) 658#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) 659#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) 660#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) 661#define MPI2_FUNCTION_IO_UNIT_CONTROL (0x1B) 662#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) 663#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) 664#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) 665#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) 666#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) 667#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) 668#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) 669#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) 670#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) 671#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33) 672#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) 673#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) 674 675/*Doorbell functions */ 676#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) 677#define MPI2_FUNCTION_HANDSHAKE (0x42) 678 679/***************************************************************************** 680* 681* IOC Status Values 682* 683*****************************************************************************/ 684 685/*mask for IOCStatus status value */ 686#define MPI2_IOCSTATUS_MASK (0x7FFF) 687 688/**************************************************************************** 689* Common IOCStatus values for all replies 690****************************************************************************/ 691 692#define MPI2_IOCSTATUS_SUCCESS (0x0000) 693#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001) 694#define MPI2_IOCSTATUS_BUSY (0x0002) 695#define MPI2_IOCSTATUS_INVALID_SGL (0x0003) 696#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004) 697#define MPI2_IOCSTATUS_INVALID_VPID (0x0005) 698#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) 699#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) 700#define MPI2_IOCSTATUS_INVALID_STATE (0x0008) 701#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) 702/*MPI v2.6 and later */ 703#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A) 704#define MPI2_IOCSTATUS_FAILURE (0x000F) 705 706/**************************************************************************** 707* Config IOCStatus values 708****************************************************************************/ 709 710#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) 711#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) 712#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) 713#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) 714#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) 715#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) 716 717/**************************************************************************** 718* SCSI IO Reply 719****************************************************************************/ 720 721#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) 722#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) 723#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) 724#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) 725#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) 726#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) 727#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) 728#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) 729#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) 730#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) 731#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) 732#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) 733 734/**************************************************************************** 735* For use by SCSI Initiator and SCSI Target end-to-end data protection 736****************************************************************************/ 737 738#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) 739#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) 740#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) 741 742/**************************************************************************** 743* SCSI Target values 744****************************************************************************/ 745 746#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) 747#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063) 748#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) 749#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) 750#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) 751#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) 752#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) 753#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) 754#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) 755#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) 756 757/**************************************************************************** 758* Serial Attached SCSI values 759****************************************************************************/ 760 761#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) 762#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) 763 764/**************************************************************************** 765* Diagnostic Buffer Post / Diagnostic Release values 766****************************************************************************/ 767 768#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) 769 770/**************************************************************************** 771* RAID Accelerator values 772****************************************************************************/ 773 774#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0) 775 776/**************************************************************************** 777* IOCStatus flag to indicate that log info is available 778****************************************************************************/ 779 780#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) 781 782/**************************************************************************** 783* IOCLogInfo Types 784****************************************************************************/ 785 786#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000) 787#define MPI2_IOCLOGINFO_TYPE_SHIFT (28) 788#define MPI2_IOCLOGINFO_TYPE_NONE (0x0) 789#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1) 790#define MPI2_IOCLOGINFO_TYPE_FC (0x2) 791#define MPI2_IOCLOGINFO_TYPE_SAS (0x3) 792#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4) 793#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) 794 795/***************************************************************************** 796* 797* Standard Message Structures 798* 799*****************************************************************************/ 800 801/**************************************************************************** 802*Request Message Header for all request messages 803****************************************************************************/ 804 805typedef struct _MPI2_REQUEST_HEADER { 806 U16 FunctionDependent1; /*0x00 */ 807 U8 ChainOffset; /*0x02 */ 808 U8 Function; /*0x03 */ 809 U16 FunctionDependent2; /*0x04 */ 810 U8 FunctionDependent3; /*0x06 */ 811 U8 MsgFlags; /*0x07 */ 812 U8 VP_ID; /*0x08 */ 813 U8 VF_ID; /*0x09 */ 814 U16 Reserved1; /*0x0A */ 815} MPI2_REQUEST_HEADER, *PTR_MPI2_REQUEST_HEADER, 816 MPI2RequestHeader_t, *pMPI2RequestHeader_t; 817 818/**************************************************************************** 819* Default Reply 820****************************************************************************/ 821 822typedef struct _MPI2_DEFAULT_REPLY { 823 U16 FunctionDependent1; /*0x00 */ 824 U8 MsgLength; /*0x02 */ 825 U8 Function; /*0x03 */ 826 U16 FunctionDependent2; /*0x04 */ 827 U8 FunctionDependent3; /*0x06 */ 828 U8 MsgFlags; /*0x07 */ 829 U8 VP_ID; /*0x08 */ 830 U8 VF_ID; /*0x09 */ 831 U16 Reserved1; /*0x0A */ 832 U16 FunctionDependent5; /*0x0C */ 833 U16 IOCStatus; /*0x0E */ 834 U32 IOCLogInfo; /*0x10 */ 835} MPI2_DEFAULT_REPLY, *PTR_MPI2_DEFAULT_REPLY, 836 MPI2DefaultReply_t, *pMPI2DefaultReply_t; 837 838/*common version structure/union used in messages and configuration pages */ 839 840typedef struct _MPI2_VERSION_STRUCT { 841 U8 Dev; /*0x00 */ 842 U8 Unit; /*0x01 */ 843 U8 Minor; /*0x02 */ 844 U8 Major; /*0x03 */ 845} MPI2_VERSION_STRUCT; 846 847typedef union _MPI2_VERSION_UNION { 848 MPI2_VERSION_STRUCT Struct; 849 U32 Word; 850} MPI2_VERSION_UNION; 851 852/*LUN field defines, common to many structures */ 853#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) 854#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) 855#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) 856#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) 857#define MPI2_LUN_LEVEL_1_WORD (0xFF00) 858#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00) 859 860/***************************************************************************** 861* 862* Fusion-MPT MPI Scatter Gather Elements 863* 864*****************************************************************************/ 865 866/**************************************************************************** 867* MPI Simple Element structures 868****************************************************************************/ 869 870typedef struct _MPI2_SGE_SIMPLE32 { 871 U32 FlagsLength; 872 U32 Address; 873} MPI2_SGE_SIMPLE32, *PTR_MPI2_SGE_SIMPLE32, 874 Mpi2SGESimple32_t, *pMpi2SGESimple32_t; 875 876typedef struct _MPI2_SGE_SIMPLE64 { 877 U32 FlagsLength; 878 U64 Address; 879} MPI2_SGE_SIMPLE64, *PTR_MPI2_SGE_SIMPLE64, 880 Mpi2SGESimple64_t, *pMpi2SGESimple64_t; 881 882typedef struct _MPI2_SGE_SIMPLE_UNION { 883 U32 FlagsLength; 884 union { 885 U32 Address32; 886 U64 Address64; 887 } u; 888} MPI2_SGE_SIMPLE_UNION, 889 *PTR_MPI2_SGE_SIMPLE_UNION, 890 Mpi2SGESimpleUnion_t, 891 *pMpi2SGESimpleUnion_t; 892 893/**************************************************************************** 894* MPI Chain Element structures - for MPI v2.0 products only 895****************************************************************************/ 896 897typedef struct _MPI2_SGE_CHAIN32 { 898 U16 Length; 899 U8 NextChainOffset; 900 U8 Flags; 901 U32 Address; 902} MPI2_SGE_CHAIN32, *PTR_MPI2_SGE_CHAIN32, 903 Mpi2SGEChain32_t, *pMpi2SGEChain32_t; 904 905typedef struct _MPI2_SGE_CHAIN64 { 906 U16 Length; 907 U8 NextChainOffset; 908 U8 Flags; 909 U64 Address; 910} MPI2_SGE_CHAIN64, *PTR_MPI2_SGE_CHAIN64, 911 Mpi2SGEChain64_t, *pMpi2SGEChain64_t; 912 913typedef struct _MPI2_SGE_CHAIN_UNION { 914 U16 Length; 915 U8 NextChainOffset; 916 U8 Flags; 917 union { 918 U32 Address32; 919 U64 Address64; 920 } u; 921} MPI2_SGE_CHAIN_UNION, 922 *PTR_MPI2_SGE_CHAIN_UNION, 923 Mpi2SGEChainUnion_t, 924 *pMpi2SGEChainUnion_t; 925 926/**************************************************************************** 927* MPI Transaction Context Element structures - for MPI v2.0 products only 928****************************************************************************/ 929 930typedef struct _MPI2_SGE_TRANSACTION32 { 931 U8 Reserved; 932 U8 ContextSize; 933 U8 DetailsLength; 934 U8 Flags; 935 U32 TransactionContext[1]; 936 U32 TransactionDetails[1]; 937} MPI2_SGE_TRANSACTION32, 938 *PTR_MPI2_SGE_TRANSACTION32, 939 Mpi2SGETransaction32_t, 940 *pMpi2SGETransaction32_t; 941 942typedef struct _MPI2_SGE_TRANSACTION64 { 943 U8 Reserved; 944 U8 ContextSize; 945 U8 DetailsLength; 946 U8 Flags; 947 U32 TransactionContext[2]; 948 U32 TransactionDetails[1]; 949} MPI2_SGE_TRANSACTION64, 950 *PTR_MPI2_SGE_TRANSACTION64, 951 Mpi2SGETransaction64_t, 952 *pMpi2SGETransaction64_t; 953 954typedef struct _MPI2_SGE_TRANSACTION96 { 955 U8 Reserved; 956 U8 ContextSize; 957 U8 DetailsLength; 958 U8 Flags; 959 U32 TransactionContext[3]; 960 U32 TransactionDetails[1]; 961} MPI2_SGE_TRANSACTION96, *PTR_MPI2_SGE_TRANSACTION96, 962 Mpi2SGETransaction96_t, *pMpi2SGETransaction96_t; 963 964typedef struct _MPI2_SGE_TRANSACTION128 { 965 U8 Reserved; 966 U8 ContextSize; 967 U8 DetailsLength; 968 U8 Flags; 969 U32 TransactionContext[4]; 970 U32 TransactionDetails[1]; 971} MPI2_SGE_TRANSACTION128, *PTR_MPI2_SGE_TRANSACTION128, 972 Mpi2SGETransaction_t128, *pMpi2SGETransaction_t128; 973 974typedef struct _MPI2_SGE_TRANSACTION_UNION { 975 U8 Reserved; 976 U8 ContextSize; 977 U8 DetailsLength; 978 U8 Flags; 979 union { 980 U32 TransactionContext32[1]; 981 U32 TransactionContext64[2]; 982 U32 TransactionContext96[3]; 983 U32 TransactionContext128[4]; 984 } u; 985 U32 TransactionDetails[1]; 986} MPI2_SGE_TRANSACTION_UNION, 987 *PTR_MPI2_SGE_TRANSACTION_UNION, 988 Mpi2SGETransactionUnion_t, 989 *pMpi2SGETransactionUnion_t; 990 991/**************************************************************************** 992* MPI SGE union for IO SGL's - for MPI v2.0 products only 993****************************************************************************/ 994 995typedef struct _MPI2_MPI_SGE_IO_UNION { 996 union { 997 MPI2_SGE_SIMPLE_UNION Simple; 998 MPI2_SGE_CHAIN_UNION Chain; 999 } u; 1000} MPI2_MPI_SGE_IO_UNION, *PTR_MPI2_MPI_SGE_IO_UNION, 1001 Mpi2MpiSGEIOUnion_t, *pMpi2MpiSGEIOUnion_t; 1002 1003/**************************************************************************** 1004* MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only 1005****************************************************************************/ 1006 1007typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION { 1008 union { 1009 MPI2_SGE_SIMPLE_UNION Simple; 1010 MPI2_SGE_TRANSACTION_UNION Transaction; 1011 } u; 1012} MPI2_SGE_TRANS_SIMPLE_UNION, 1013 *PTR_MPI2_SGE_TRANS_SIMPLE_UNION, 1014 Mpi2SGETransSimpleUnion_t, 1015 *pMpi2SGETransSimpleUnion_t; 1016 1017/**************************************************************************** 1018* All MPI SGE types union 1019****************************************************************************/ 1020 1021typedef struct _MPI2_MPI_SGE_UNION { 1022 union { 1023 MPI2_SGE_SIMPLE_UNION Simple; 1024 MPI2_SGE_CHAIN_UNION Chain; 1025 MPI2_SGE_TRANSACTION_UNION Transaction; 1026 } u; 1027} MPI2_MPI_SGE_UNION, *PTR_MPI2_MPI_SGE_UNION, 1028 Mpi2MpiSgeUnion_t, *pMpi2MpiSgeUnion_t; 1029 1030/**************************************************************************** 1031* MPI SGE field definition and masks 1032****************************************************************************/ 1033 1034/*Flags field bit definitions */ 1035 1036#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80) 1037#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40) 1038#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) 1039#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08) 1040#define MPI2_SGE_FLAGS_DIRECTION (0x04) 1041#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02) 1042#define MPI2_SGE_FLAGS_END_OF_LIST (0x01) 1043 1044#define MPI2_SGE_FLAGS_SHIFT (24) 1045 1046#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF) 1047#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) 1048 1049/*Element Type */ 1050 1051#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) 1052#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10) 1053#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30) 1054#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30) 1055 1056/*Address location */ 1057 1058#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00) 1059 1060/*Direction */ 1061 1062#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) 1063#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) 1064 1065#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST) 1066#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC) 1067 1068/*Address Size */ 1069 1070#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) 1071#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) 1072 1073/*Context Size */ 1074 1075#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00) 1076#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02) 1077#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04) 1078#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06) 1079 1080#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000) 1081#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16) 1082 1083/**************************************************************************** 1084* MPI SGE operation Macros 1085****************************************************************************/ 1086 1087/*SIMPLE FlagsLength manipulations... */ 1088#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT) 1089#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> \ 1090 MPI2_SGE_FLAGS_SHIFT) 1091#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK) 1092#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK) 1093 1094#define MPI2_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_SGE_SET_FLAGS(f) | \ 1095 MPI2_SGE_LENGTH(l)) 1096 1097#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength) 1098#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength) 1099#define MPI2_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \ 1100 MPI2_SGE_SET_FLAGS_LENGTH(f, l)) 1101 1102/*CAUTION - The following are READ-MODIFY-WRITE! */ 1103#define MPI2_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \ 1104 MPI2_SGE_SET_FLAGS(f)) 1105#define MPI2_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \ 1106 MPI2_SGE_LENGTH(l)) 1107 1108#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> \ 1109 MPI2_SGE_CHAIN_OFFSET_SHIFT) 1110 1111/***************************************************************************** 1112* 1113* Fusion-MPT IEEE Scatter Gather Elements 1114* 1115*****************************************************************************/ 1116 1117/**************************************************************************** 1118* IEEE Simple Element structures 1119****************************************************************************/ 1120 1121/*MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */ 1122typedef struct _MPI2_IEEE_SGE_SIMPLE32 { 1123 U32 Address; 1124 U32 FlagsLength; 1125} MPI2_IEEE_SGE_SIMPLE32, *PTR_MPI2_IEEE_SGE_SIMPLE32, 1126 Mpi2IeeeSgeSimple32_t, *pMpi2IeeeSgeSimple32_t; 1127 1128typedef struct _MPI2_IEEE_SGE_SIMPLE64 { 1129 U64 Address; 1130 U32 Length; 1131 U16 Reserved1; 1132 U8 Reserved2; 1133 U8 Flags; 1134} MPI2_IEEE_SGE_SIMPLE64, *PTR_MPI2_IEEE_SGE_SIMPLE64, 1135 Mpi2IeeeSgeSimple64_t, *pMpi2IeeeSgeSimple64_t; 1136 1137typedef union _MPI2_IEEE_SGE_SIMPLE_UNION { 1138 MPI2_IEEE_SGE_SIMPLE32 Simple32; 1139 MPI2_IEEE_SGE_SIMPLE64 Simple64; 1140} MPI2_IEEE_SGE_SIMPLE_UNION, 1141 *PTR_MPI2_IEEE_SGE_SIMPLE_UNION, 1142 Mpi2IeeeSgeSimpleUnion_t, 1143 *pMpi2IeeeSgeSimpleUnion_t; 1144 1145/**************************************************************************** 1146* IEEE Chain Element structures 1147****************************************************************************/ 1148 1149/*MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */ 1150typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32; 1151 1152/*MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */ 1153typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64; 1154 1155typedef union _MPI2_IEEE_SGE_CHAIN_UNION { 1156 MPI2_IEEE_SGE_CHAIN32 Chain32; 1157 MPI2_IEEE_SGE_CHAIN64 Chain64; 1158} MPI2_IEEE_SGE_CHAIN_UNION, 1159 *PTR_MPI2_IEEE_SGE_CHAIN_UNION, 1160 Mpi2IeeeSgeChainUnion_t, 1161 *pMpi2IeeeSgeChainUnion_t; 1162 1163/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */ 1164typedef struct _MPI25_IEEE_SGE_CHAIN64 { 1165 U64 Address; 1166 U32 Length; 1167 U16 Reserved1; 1168 U8 NextChainOffset; 1169 U8 Flags; 1170} MPI25_IEEE_SGE_CHAIN64, 1171 *PTR_MPI25_IEEE_SGE_CHAIN64, 1172 Mpi25IeeeSgeChain64_t, 1173 *pMpi25IeeeSgeChain64_t; 1174 1175/**************************************************************************** 1176* All IEEE SGE types union 1177****************************************************************************/ 1178 1179/*MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */ 1180typedef struct _MPI2_IEEE_SGE_UNION { 1181 union { 1182 MPI2_IEEE_SGE_SIMPLE_UNION Simple; 1183 MPI2_IEEE_SGE_CHAIN_UNION Chain; 1184 } u; 1185} MPI2_IEEE_SGE_UNION, *PTR_MPI2_IEEE_SGE_UNION, 1186 Mpi2IeeeSgeUnion_t, *pMpi2IeeeSgeUnion_t; 1187 1188/**************************************************************************** 1189* IEEE SGE union for IO SGL's 1190****************************************************************************/ 1191 1192typedef union _MPI25_SGE_IO_UNION { 1193 MPI2_IEEE_SGE_SIMPLE64 IeeeSimple; 1194 MPI25_IEEE_SGE_CHAIN64 IeeeChain; 1195} MPI25_SGE_IO_UNION, *PTR_MPI25_SGE_IO_UNION, 1196 Mpi25SGEIOUnion_t, *pMpi25SGEIOUnion_t; 1197 1198/**************************************************************************** 1199* IEEE SGE field definitions and masks 1200****************************************************************************/ 1201 1202/*Flags field bit definitions */ 1203 1204#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) 1205#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST (0x40) 1206 1207#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) 1208 1209#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) 1210 1211/*Element Type */ 1212 1213#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) 1214#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) 1215 1216/*Next Segment Format */ 1217 1218#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C) 1219#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00) 1220#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08) 1221#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10) 1222 1223/*Data Location Address Space */ 1224 1225#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) 1226#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) 1227#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) 1228#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) 1229#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) 1230#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) 1231#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \ 1232 (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) 1233#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR (0x02) 1234 1235/**************************************************************************** 1236* IEEE SGE operation Macros 1237****************************************************************************/ 1238 1239/*SIMPLE FlagsLength manipulations... */ 1240#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT) 1241#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) \ 1242 >> MPI2_IEEE32_SGE_FLAGS_SHIFT) 1243#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK) 1244 1245#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) |\ 1246 MPI2_IEEE32_SGE_LENGTH(l)) 1247 1248#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) \ 1249 MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength) 1250#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) \ 1251 MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength) 1252#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \ 1253 MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l)) 1254 1255/*CAUTION - The following are READ-MODIFY-WRITE! */ 1256#define MPI2_IEEE32_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \ 1257 MPI2_IEEE32_SGE_SET_FLAGS(f)) 1258#define MPI2_IEEE32_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \ 1259 MPI2_IEEE32_SGE_LENGTH(l)) 1260 1261/***************************************************************************** 1262* 1263* Fusion-MPT MPI/IEEE Scatter Gather Unions 1264* 1265*****************************************************************************/ 1266 1267typedef union _MPI2_SIMPLE_SGE_UNION { 1268 MPI2_SGE_SIMPLE_UNION MpiSimple; 1269 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; 1270} MPI2_SIMPLE_SGE_UNION, *PTR_MPI2_SIMPLE_SGE_UNION, 1271 Mpi2SimpleSgeUntion_t, *pMpi2SimpleSgeUntion_t; 1272 1273typedef union _MPI2_SGE_IO_UNION { 1274 MPI2_SGE_SIMPLE_UNION MpiSimple; 1275 MPI2_SGE_CHAIN_UNION MpiChain; 1276 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; 1277 MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; 1278} MPI2_SGE_IO_UNION, *PTR_MPI2_SGE_IO_UNION, 1279 Mpi2SGEIOUnion_t, *pMpi2SGEIOUnion_t; 1280 1281/**************************************************************************** 1282* 1283* Values for SGLFlags field, used in many request messages with an SGL 1284* 1285****************************************************************************/ 1286 1287/*values for MPI SGL Data Location Address Space subfield */ 1288#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) 1289#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) 1290#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) 1291#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) 1292#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) 1293#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) 1294/*values for SGL Type subfield */ 1295#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) 1296#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) 1297#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01) 1298#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02) 1299 1300#endif