mpi2_ioc.h (74831B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 4 * 5 * 6 * Name: mpi2_ioc.h 7 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages 8 * Creation Date: October 11, 2006 9 * 10 * mpi2_ioc.h Version: 02.00.37 11 * 12 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 13 * prefix are for use only on MPI v2.5 products, and must not be used 14 * with MPI v2.0 products. Unless otherwise noted, names beginning with 15 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 16 * 17 * Version History 18 * --------------- 19 * 20 * Date Version Description 21 * -------- -------- ------------------------------------------------------ 22 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 23 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to 24 * MaxTargets. 25 * Added TotalImageSize field to FWDownload Request. 26 * Added reserved words to FWUpload Request. 27 * 06-26-07 02.00.02 Added IR Configuration Change List Event. 28 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit 29 * request and replaced it with 30 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. 31 * Replaced the MinReplyQueueDepth field of the IOCFacts 32 * reply with MaxReplyDescriptorPostQueueDepth. 33 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum 34 * depth for the Reply Descriptor Post Queue. 35 * Added SASAddress field to Initiator Device Table 36 * Overflow Event data. 37 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING 38 * for SAS Initiator Device Status Change Event data. 39 * Modified Reason Code defines for SAS Topology Change 40 * List Event data, including adding a bit for PHY Vacant 41 * status, and adding a mask for the Reason Code. 42 * Added define for 43 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. 44 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. 45 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of 46 * the IOCFacts Reply. 47 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 48 * Moved MPI2_VERSION_UNION to mpi2.h. 49 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks 50 * instead of enables, and added SASBroadcastPrimitiveMasks 51 * field. 52 * Added Log Entry Added Event and related structure. 53 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. 54 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. 55 * Added MaxVolumes and MaxPersistentEntries fields to 56 * IOCFacts reply. 57 * Added ProtocalFlags and IOCCapabilities fields to 58 * MPI2_FW_IMAGE_HEADER. 59 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. 60 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to 61 * a U16 (from a U32). 62 * Removed extra 's' from EventMasks name. 63 * 06-27-08 02.00.08 Fixed an offset in a comment. 64 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. 65 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and 66 * renamed MinReplyFrameSize to ReplyFrameSize. 67 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. 68 * Added two new RAIDOperation values for Integrated RAID 69 * Operations Status Event data. 70 * Added four new IR Configuration Change List Event data 71 * ReasonCode values. 72 * Added two new ReasonCode defines for SAS Device Status 73 * Change Event data. 74 * Added three new DiscoveryStatus bits for the SAS 75 * Discovery event data. 76 * Added Multiplexing Status Change bit to the PhyStatus 77 * field of the SAS Topology Change List event data. 78 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. 79 * BootFlags are now product-specific. 80 * Added defines for the indivdual signature bytes 81 * for MPI2_INIT_IMAGE_FOOTER. 82 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. 83 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR 84 * define. 85 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE 86 * define. 87 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. 88 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. 89 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. 90 * Added two new reason codes for SAS Device Status Change 91 * Event. 92 * Added new event: SAS PHY Counter. 93 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. 94 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 95 * Added new product id family for 2208. 96 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. 97 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. 98 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. 99 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. 100 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. 101 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. 102 * Added Host Based Discovery Phy Event data. 103 * Added defines for ProductID Product field 104 * (MPI2_FW_HEADER_PID_). 105 * Modified values for SAS ProductID Family 106 * (MPI2_FW_HEADER_PID_FAMILY_). 107 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. 108 * Added PowerManagementControl Request structures and 109 * defines. 110 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. 111 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. 112 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. 113 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added 114 * SASNotifyPrimitiveMasks field to 115 * MPI2_EVENT_NOTIFICATION_REQUEST. 116 * Added Temperature Threshold Event. 117 * Added Host Message Event. 118 * Added Send Host Message request and reply. 119 * 05-25-11 02.00.18 For Extended Image Header, added 120 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and 121 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. 122 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. 123 * 08-24-11 02.00.19 Added PhysicalPort field to 124 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. 125 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. 126 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. 127 * 03-29-12 02.00.21 Added a product specific range to event values. 128 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. 129 * Added ElapsedSeconds field to 130 * MPI2_EVENT_DATA_IR_OPERATION_STATUS. 131 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE 132 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. 133 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. 134 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. 135 * Added Encrypted Hash Extended Image. 136 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. 137 * 11-18-14 02.00.25 Updated copyright information. 138 * 03-16-15 02.00.26 Updated for MPI v2.6. 139 * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and 140 * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. 141 * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and 142 * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. 143 * Added MPI26_CTRL_OP_SHUTDOWN. 144 * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. 145 * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. 146 * Added ConigurationFlags field to IOCInit message to 147 * support NVMe SGL format control. 148 * Added PCIe SRIOV support. 149 * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. 150 * Added PCIe 4 16.0 GT/sec speec support. 151 * Removed AHCI support. 152 * Removed SOP support. 153 * 07-01-16 02.00.29 Added Archclass for 4008 product. 154 * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED 155 * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload 156 * Request Message. 157 * Added new defines for the ImageType field of FWUpload 158 * Request Message. 159 * Added new values for the RegionType field in the Layout 160 * Data sections of the FLASH Layout Extended Image Data. 161 * Added new defines for the ReasonCode field of 162 * Active Cable Exception Event. 163 * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and 164 * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. 165 * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and 166 * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. 167 * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. 168 * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related 169 * defines for the ReasonCode field. 170 * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD. 171 * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED 172 * to the ReasonCode field in PCIe Device Status Change 173 * Event Data. 174 * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC. 175 * Moved FW image definitions ionto new mpi2_image,h 176 * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) 177 * 09-07-18 02.00.37 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES 178 * 10-02-19 02.00.38 Added MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE 179 * Added MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED 180 * Added MPI2_FW_DOWNLOAD_ITYPE_COREDUMP 181 * Added MPI2_FW_UPLOAD_ITYPE_COREDUMP 182 * -------------------------------------------------------------------------- 183 */ 184 185#ifndef MPI2_IOC_H 186#define MPI2_IOC_H 187 188/***************************************************************************** 189* 190* IOC Messages 191* 192*****************************************************************************/ 193 194/**************************************************************************** 195* IOCInit message 196****************************************************************************/ 197 198/*IOCInit Request message */ 199typedef struct _MPI2_IOC_INIT_REQUEST { 200 U8 WhoInit; /*0x00 */ 201 U8 Reserved1; /*0x01 */ 202 U8 ChainOffset; /*0x02 */ 203 U8 Function; /*0x03 */ 204 U16 Reserved2; /*0x04 */ 205 U8 Reserved3; /*0x06 */ 206 U8 MsgFlags; /*0x07 */ 207 U8 VP_ID; /*0x08 */ 208 U8 VF_ID; /*0x09 */ 209 U16 Reserved4; /*0x0A */ 210 U16 MsgVersion; /*0x0C */ 211 U16 HeaderVersion; /*0x0E */ 212 U32 Reserved5; /*0x10 */ 213 U16 ConfigurationFlags; /* 0x14 */ 214 U8 HostPageSize; /*0x16 */ 215 U8 HostMSIxVectors; /*0x17 */ 216 U16 Reserved8; /*0x18 */ 217 U16 SystemRequestFrameSize; /*0x1A */ 218 U16 ReplyDescriptorPostQueueDepth; /*0x1C */ 219 U16 ReplyFreeQueueDepth; /*0x1E */ 220 U32 SenseBufferAddressHigh; /*0x20 */ 221 U32 SystemReplyAddressHigh; /*0x24 */ 222 U64 SystemRequestFrameBaseAddress; /*0x28 */ 223 U64 ReplyDescriptorPostQueueAddress; /*0x30 */ 224 U64 ReplyFreeQueueAddress; /*0x38 */ 225 U64 TimeStamp; /*0x40 */ 226} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST, 227 Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t; 228 229/*WhoInit values */ 230#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) 231#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) 232#define MPI2_WHOINIT_ROM_BIOS (0x02) 233#define MPI2_WHOINIT_PCI_PEER (0x03) 234#define MPI2_WHOINIT_HOST_DRIVER (0x04) 235#define MPI2_WHOINIT_MANUFACTURER (0x05) 236 237/* MsgFlags */ 238#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) 239 240 241/*MsgVersion */ 242#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) 243#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) 244#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) 245#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) 246 247/*HeaderVersion */ 248#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) 249#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) 250#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) 251#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) 252 253/*ConfigurationFlags */ 254#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) 255#define MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE (0x0002) 256 257/*minimum depth for a Reply Descriptor Post Queue */ 258#define MPI2_RDPQ_DEPTH_MIN (16) 259 260/* Reply Descriptor Post Queue Array Entry */ 261typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY { 262 U64 RDPQBaseAddress; /* 0x00 */ 263 U32 Reserved1; /* 0x08 */ 264 U32 Reserved2; /* 0x0C */ 265} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 266*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 267Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry; 268 269 270/*IOCInit Reply message */ 271typedef struct _MPI2_IOC_INIT_REPLY { 272 U8 WhoInit; /*0x00 */ 273 U8 Reserved1; /*0x01 */ 274 U8 MsgLength; /*0x02 */ 275 U8 Function; /*0x03 */ 276 U16 Reserved2; /*0x04 */ 277 U8 Reserved3; /*0x06 */ 278 U8 MsgFlags; /*0x07 */ 279 U8 VP_ID; /*0x08 */ 280 U8 VF_ID; /*0x09 */ 281 U16 Reserved4; /*0x0A */ 282 U16 Reserved5; /*0x0C */ 283 U16 IOCStatus; /*0x0E */ 284 U32 IOCLogInfo; /*0x10 */ 285} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY, 286 Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t; 287 288/**************************************************************************** 289* IOCFacts message 290****************************************************************************/ 291 292/*IOCFacts Request message */ 293typedef struct _MPI2_IOC_FACTS_REQUEST { 294 U16 Reserved1; /*0x00 */ 295 U8 ChainOffset; /*0x02 */ 296 U8 Function; /*0x03 */ 297 U16 Reserved2; /*0x04 */ 298 U8 Reserved3; /*0x06 */ 299 U8 MsgFlags; /*0x07 */ 300 U8 VP_ID; /*0x08 */ 301 U8 VF_ID; /*0x09 */ 302 U16 Reserved4; /*0x0A */ 303} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST, 304 Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t; 305 306/*IOCFacts Reply message */ 307typedef struct _MPI2_IOC_FACTS_REPLY { 308 U16 MsgVersion; /*0x00 */ 309 U8 MsgLength; /*0x02 */ 310 U8 Function; /*0x03 */ 311 U16 HeaderVersion; /*0x04 */ 312 U8 IOCNumber; /*0x06 */ 313 U8 MsgFlags; /*0x07 */ 314 U8 VP_ID; /*0x08 */ 315 U8 VF_ID; /*0x09 */ 316 U16 Reserved1; /*0x0A */ 317 U16 IOCExceptions; /*0x0C */ 318 U16 IOCStatus; /*0x0E */ 319 U32 IOCLogInfo; /*0x10 */ 320 U8 MaxChainDepth; /*0x14 */ 321 U8 WhoInit; /*0x15 */ 322 U8 NumberOfPorts; /*0x16 */ 323 U8 MaxMSIxVectors; /*0x17 */ 324 U16 RequestCredit; /*0x18 */ 325 U16 ProductID; /*0x1A */ 326 U32 IOCCapabilities; /*0x1C */ 327 MPI2_VERSION_UNION FWVersion; /*0x20 */ 328 U16 IOCRequestFrameSize; /*0x24 */ 329 U16 IOCMaxChainSegmentSize; /*0x26 */ 330 U16 MaxInitiators; /*0x28 */ 331 U16 MaxTargets; /*0x2A */ 332 U16 MaxSasExpanders; /*0x2C */ 333 U16 MaxEnclosures; /*0x2E */ 334 U16 ProtocolFlags; /*0x30 */ 335 U16 HighPriorityCredit; /*0x32 */ 336 U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */ 337 U8 ReplyFrameSize; /*0x36 */ 338 U8 MaxVolumes; /*0x37 */ 339 U16 MaxDevHandle; /*0x38 */ 340 U16 MaxPersistentEntries; /*0x3A */ 341 U16 MinDevHandle; /*0x3C */ 342 U8 CurrentHostPageSize; /* 0x3E */ 343 U8 Reserved4; /* 0x3F */ 344 U8 SGEModifierMask; /*0x40 */ 345 U8 SGEModifierValue; /*0x41 */ 346 U8 SGEModifierShift; /*0x42 */ 347 U8 Reserved5; /*0x43 */ 348} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, 349 Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; 350 351/*MsgVersion */ 352#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) 353#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) 354#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) 355#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) 356 357/*HeaderVersion */ 358#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) 359#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) 360#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) 361#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) 362 363/*IOCExceptions */ 364#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) 365#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) 366#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) 367 368#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) 369#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) 370#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) 371#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) 372#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) 373 374#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) 375#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) 376#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) 377#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) 378#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) 379 380/*defines for WhoInit field are after the IOCInit Request */ 381 382/*ProductID field uses MPI2_FW_HEADER_PID_ */ 383 384/*IOCCapabilities */ 385#define MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED (0x00200000) 386#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) 387#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) 388#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) 389#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) 390#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) 391#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) 392#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) 393#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) 394#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) 395#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) 396#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) 397#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) 398#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) 399#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) 400#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) 401#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) 402#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) 403 404/*ProtocolFlags */ 405#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) 406#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) 407#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) 408 409/**************************************************************************** 410* PortFacts message 411****************************************************************************/ 412 413/*PortFacts Request message */ 414typedef struct _MPI2_PORT_FACTS_REQUEST { 415 U16 Reserved1; /*0x00 */ 416 U8 ChainOffset; /*0x02 */ 417 U8 Function; /*0x03 */ 418 U16 Reserved2; /*0x04 */ 419 U8 PortNumber; /*0x06 */ 420 U8 MsgFlags; /*0x07 */ 421 U8 VP_ID; /*0x08 */ 422 U8 VF_ID; /*0x09 */ 423 U16 Reserved3; /*0x0A */ 424} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST, 425 Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t; 426 427/*PortFacts Reply message */ 428typedef struct _MPI2_PORT_FACTS_REPLY { 429 U16 Reserved1; /*0x00 */ 430 U8 MsgLength; /*0x02 */ 431 U8 Function; /*0x03 */ 432 U16 Reserved2; /*0x04 */ 433 U8 PortNumber; /*0x06 */ 434 U8 MsgFlags; /*0x07 */ 435 U8 VP_ID; /*0x08 */ 436 U8 VF_ID; /*0x09 */ 437 U16 Reserved3; /*0x0A */ 438 U16 Reserved4; /*0x0C */ 439 U16 IOCStatus; /*0x0E */ 440 U32 IOCLogInfo; /*0x10 */ 441 U8 Reserved5; /*0x14 */ 442 U8 PortType; /*0x15 */ 443 U16 Reserved6; /*0x16 */ 444 U16 MaxPostedCmdBuffers; /*0x18 */ 445 U16 Reserved7; /*0x1A */ 446} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY, 447 Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t; 448 449/*PortType values */ 450#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) 451#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) 452#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) 453#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) 454#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) 455#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) 456 457 458/**************************************************************************** 459* PortEnable message 460****************************************************************************/ 461 462/*PortEnable Request message */ 463typedef struct _MPI2_PORT_ENABLE_REQUEST { 464 U16 Reserved1; /*0x00 */ 465 U8 ChainOffset; /*0x02 */ 466 U8 Function; /*0x03 */ 467 U8 Reserved2; /*0x04 */ 468 U8 PortFlags; /*0x05 */ 469 U8 Reserved3; /*0x06 */ 470 U8 MsgFlags; /*0x07 */ 471 U8 VP_ID; /*0x08 */ 472 U8 VF_ID; /*0x09 */ 473 U16 Reserved4; /*0x0A */ 474} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST, 475 Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t; 476 477/*PortEnable Reply message */ 478typedef struct _MPI2_PORT_ENABLE_REPLY { 479 U16 Reserved1; /*0x00 */ 480 U8 MsgLength; /*0x02 */ 481 U8 Function; /*0x03 */ 482 U8 Reserved2; /*0x04 */ 483 U8 PortFlags; /*0x05 */ 484 U8 Reserved3; /*0x06 */ 485 U8 MsgFlags; /*0x07 */ 486 U8 VP_ID; /*0x08 */ 487 U8 VF_ID; /*0x09 */ 488 U16 Reserved4; /*0x0A */ 489 U16 Reserved5; /*0x0C */ 490 U16 IOCStatus; /*0x0E */ 491 U32 IOCLogInfo; /*0x10 */ 492} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY, 493 Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t; 494 495/**************************************************************************** 496* EventNotification message 497****************************************************************************/ 498 499/*EventNotification Request message */ 500#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) 501 502typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { 503 U16 Reserved1; /*0x00 */ 504 U8 ChainOffset; /*0x02 */ 505 U8 Function; /*0x03 */ 506 U16 Reserved2; /*0x04 */ 507 U8 Reserved3; /*0x06 */ 508 U8 MsgFlags; /*0x07 */ 509 U8 VP_ID; /*0x08 */ 510 U8 VF_ID; /*0x09 */ 511 U16 Reserved4; /*0x0A */ 512 U32 Reserved5; /*0x0C */ 513 U32 Reserved6; /*0x10 */ 514 U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */ 515 U16 SASBroadcastPrimitiveMasks; /*0x24 */ 516 U16 SASNotifyPrimitiveMasks; /*0x26 */ 517 U32 Reserved8; /*0x28 */ 518} MPI2_EVENT_NOTIFICATION_REQUEST, 519 *PTR_MPI2_EVENT_NOTIFICATION_REQUEST, 520 Mpi2EventNotificationRequest_t, 521 *pMpi2EventNotificationRequest_t; 522 523/*EventNotification Reply message */ 524typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { 525 U16 EventDataLength; /*0x00 */ 526 U8 MsgLength; /*0x02 */ 527 U8 Function; /*0x03 */ 528 U16 Reserved1; /*0x04 */ 529 U8 AckRequired; /*0x06 */ 530 U8 MsgFlags; /*0x07 */ 531 U8 VP_ID; /*0x08 */ 532 U8 VF_ID; /*0x09 */ 533 U16 Reserved2; /*0x0A */ 534 U16 Reserved3; /*0x0C */ 535 U16 IOCStatus; /*0x0E */ 536 U32 IOCLogInfo; /*0x10 */ 537 U16 Event; /*0x14 */ 538 U16 Reserved4; /*0x16 */ 539 U32 EventContext; /*0x18 */ 540 U32 EventData[]; /*0x1C */ 541} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, 542 Mpi2EventNotificationReply_t, 543 *pMpi2EventNotificationReply_t; 544 545/*AckRequired */ 546#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) 547#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) 548 549/*Event */ 550#define MPI2_EVENT_LOG_DATA (0x0001) 551#define MPI2_EVENT_STATE_CHANGE (0x0002) 552#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) 553#define MPI2_EVENT_EVENT_CHANGE (0x000A) 554#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */ 555#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) 556#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) 557#define MPI2_EVENT_SAS_DISCOVERY (0x0016) 558#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) 559#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) 560#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) 561#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) 562#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) 563#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) 564#define MPI2_EVENT_IR_VOLUME (0x001E) 565#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) 566#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) 567#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) 568#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) 569#define MPI2_EVENT_GPIO_INTERRUPT (0x0023) 570#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) 571#define MPI2_EVENT_SAS_QUIESCE (0x0025) 572#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) 573#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) 574#define MPI2_EVENT_HOST_MESSAGE (0x0028) 575#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) 576#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) 577#define MPI2_EVENT_PCIE_ENUMERATION (0x0031) 578#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) 579#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) 580#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) 581#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) 582#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) 583#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) 584 585/*Log Entry Added Event data */ 586 587/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ 588#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) 589 590typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { 591 U64 TimeStamp; /*0x00 */ 592 U32 Reserved1; /*0x08 */ 593 U16 LogSequence; /*0x0C */ 594 U16 LogEntryQualifier; /*0x0E */ 595 U8 VP_ID; /*0x10 */ 596 U8 VF_ID; /*0x11 */ 597 U16 Reserved2; /*0x12 */ 598 U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */ 599} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 600 *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 601 Mpi2EventDataLogEntryAdded_t, 602 *pMpi2EventDataLogEntryAdded_t; 603 604/*GPIO Interrupt Event data */ 605 606typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { 607 U8 GPIONum; /*0x00 */ 608 U8 Reserved1; /*0x01 */ 609 U16 Reserved2; /*0x02 */ 610} MPI2_EVENT_DATA_GPIO_INTERRUPT, 611 *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, 612 Mpi2EventDataGpioInterrupt_t, 613 *pMpi2EventDataGpioInterrupt_t; 614 615/*Temperature Threshold Event data */ 616 617typedef struct _MPI2_EVENT_DATA_TEMPERATURE { 618 U16 Status; /*0x00 */ 619 U8 SensorNum; /*0x02 */ 620 U8 Reserved1; /*0x03 */ 621 U16 CurrentTemperature; /*0x04 */ 622 U16 Reserved2; /*0x06 */ 623 U32 Reserved3; /*0x08 */ 624 U32 Reserved4; /*0x0C */ 625} MPI2_EVENT_DATA_TEMPERATURE, 626 *PTR_MPI2_EVENT_DATA_TEMPERATURE, 627 Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t; 628 629/*Temperature Threshold Event data Status bits */ 630#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) 631#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) 632#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) 633#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) 634 635/*Host Message Event data */ 636 637typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { 638 U8 SourceVF_ID; /*0x00 */ 639 U8 Reserved1; /*0x01 */ 640 U16 Reserved2; /*0x02 */ 641 U32 Reserved3; /*0x04 */ 642 U32 HostData[]; /*0x08 */ 643} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, 644 Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; 645 646/*Power Performance Change Event data */ 647 648typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { 649 U8 CurrentPowerMode; /*0x00 */ 650 U8 PreviousPowerMode; /*0x01 */ 651 U16 Reserved1; /*0x02 */ 652} MPI2_EVENT_DATA_POWER_PERF_CHANGE, 653 *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, 654 Mpi2EventDataPowerPerfChange_t, 655 *pMpi2EventDataPowerPerfChange_t; 656 657/*defines for CurrentPowerMode and PreviousPowerMode fields */ 658#define MPI2_EVENT_PM_INIT_MASK (0xC0) 659#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) 660#define MPI2_EVENT_PM_INIT_HOST (0x40) 661#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) 662#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) 663 664#define MPI2_EVENT_PM_MODE_MASK (0x07) 665#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) 666#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) 667#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) 668#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) 669#define MPI2_EVENT_PM_MODE_STANDBY (0x06) 670 671/* Active Cable Exception Event data */ 672 673typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT { 674 U32 ActiveCablePowerRequirement; /* 0x00 */ 675 U8 ReasonCode; /* 0x04 */ 676 U8 ReceptacleID; /* 0x05 */ 677 U16 Reserved1; /* 0x06 */ 678} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 679 *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 680 Mpi25EventDataActiveCableExcept_t, 681 *pMpi25EventDataActiveCableExcept_t, 682 MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 683 *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 684 Mpi26EventDataActiveCableExcept_t, 685 *pMpi26EventDataActiveCableExcept_t; 686 687/*MPI2.5 defines for the ReasonCode field */ 688#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) 689#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) 690#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) 691 692/* defines for ReasonCode field */ 693#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) 694#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) 695#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02) 696 697/*Hard Reset Received Event data */ 698 699typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { 700 U8 Reserved1; /*0x00 */ 701 U8 Port; /*0x01 */ 702 U16 Reserved2; /*0x02 */ 703} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 704 *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 705 Mpi2EventDataHardResetReceived_t, 706 *pMpi2EventDataHardResetReceived_t; 707 708/*Task Set Full Event data */ 709/* this event is obsolete */ 710 711typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { 712 U16 DevHandle; /*0x00 */ 713 U16 CurrentDepth; /*0x02 */ 714} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL, 715 Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t; 716 717/*SAS Device Status Change Event data */ 718 719typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { 720 U16 TaskTag; /*0x00 */ 721 U8 ReasonCode; /*0x02 */ 722 U8 PhysicalPort; /*0x03 */ 723 U8 ASC; /*0x04 */ 724 U8 ASCQ; /*0x05 */ 725 U16 DevHandle; /*0x06 */ 726 U32 Reserved2; /*0x08 */ 727 U64 SASAddress; /*0x0C */ 728 U8 LUN[8]; /*0x14 */ 729} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 730 *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 731 Mpi2EventDataSasDeviceStatusChange_t, 732 *pMpi2EventDataSasDeviceStatusChange_t; 733 734/*SAS Device Status Change Event data ReasonCode values */ 735#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) 736#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) 737#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 738#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 739#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 740#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 741#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 742#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 743#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 744#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 745#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) 746#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) 747#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) 748 749/*Integrated RAID Operation Status Event data */ 750 751typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { 752 U16 VolDevHandle; /*0x00 */ 753 U16 Reserved1; /*0x02 */ 754 U8 RAIDOperation; /*0x04 */ 755 U8 PercentComplete; /*0x05 */ 756 U16 Reserved2; /*0x06 */ 757 U32 ElapsedSeconds; /*0x08 */ 758} MPI2_EVENT_DATA_IR_OPERATION_STATUS, 759 *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, 760 Mpi2EventDataIrOperationStatus_t, 761 *pMpi2EventDataIrOperationStatus_t; 762 763/*Integrated RAID Operation Status Event data RAIDOperation values */ 764#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) 765#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) 766#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) 767#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) 768#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) 769 770/*Integrated RAID Volume Event data */ 771 772typedef struct _MPI2_EVENT_DATA_IR_VOLUME { 773 U16 VolDevHandle; /*0x00 */ 774 U8 ReasonCode; /*0x02 */ 775 U8 Reserved1; /*0x03 */ 776 U32 NewValue; /*0x04 */ 777 U32 PreviousValue; /*0x08 */ 778} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME, 779 Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t; 780 781/*Integrated RAID Volume Event data ReasonCode values */ 782#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) 783#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) 784#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) 785 786/*Integrated RAID Physical Disk Event data */ 787 788typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { 789 U16 Reserved1; /*0x00 */ 790 U8 ReasonCode; /*0x02 */ 791 U8 PhysDiskNum; /*0x03 */ 792 U16 PhysDiskDevHandle; /*0x04 */ 793 U16 Reserved2; /*0x06 */ 794 U16 Slot; /*0x08 */ 795 U16 EnclosureHandle; /*0x0A */ 796 U32 NewValue; /*0x0C */ 797 U32 PreviousValue; /*0x10 */ 798} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 799 *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 800 Mpi2EventDataIrPhysicalDisk_t, 801 *pMpi2EventDataIrPhysicalDisk_t; 802 803/*Integrated RAID Physical Disk Event data ReasonCode values */ 804#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) 805#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) 806#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) 807 808/*Integrated RAID Configuration Change List Event data */ 809 810/* 811 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to 812 *one and check NumElements at runtime. 813 */ 814#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT 815#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) 816#endif 817 818typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { 819 U16 ElementFlags; /*0x00 */ 820 U16 VolDevHandle; /*0x02 */ 821 U8 ReasonCode; /*0x04 */ 822 U8 PhysDiskNum; /*0x05 */ 823 U16 PhysDiskDevHandle; /*0x06 */ 824} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, 825 Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t; 826 827/*IR Configuration Change List Event data ElementFlags values */ 828#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) 829#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) 830#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) 831#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) 832 833/*IR Configuration Change List Event data ReasonCode values */ 834#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) 835#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) 836#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) 837#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) 838#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) 839#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) 840#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) 841#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) 842#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) 843 844typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { 845 U8 NumElements; /*0x00 */ 846 U8 Reserved1; /*0x01 */ 847 U8 Reserved2; /*0x02 */ 848 U8 ConfigNum; /*0x03 */ 849 U32 Flags; /*0x04 */ 850 MPI2_EVENT_IR_CONFIG_ELEMENT 851 ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */ 852} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 853 *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 854 Mpi2EventDataIrConfigChangeList_t, 855 *pMpi2EventDataIrConfigChangeList_t; 856 857/*IR Configuration Change List Event data Flags values */ 858#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) 859 860/*SAS Discovery Event data */ 861 862typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { 863 U8 Flags; /*0x00 */ 864 U8 ReasonCode; /*0x01 */ 865 U8 PhysicalPort; /*0x02 */ 866 U8 Reserved1; /*0x03 */ 867 U32 DiscoveryStatus; /*0x04 */ 868} MPI2_EVENT_DATA_SAS_DISCOVERY, 869 *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, 870 Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t; 871 872/*SAS Discovery Event data Flags values */ 873#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) 874#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) 875 876/*SAS Discovery Event data ReasonCode values */ 877#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) 878#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) 879 880/*SAS Discovery Event data DiscoveryStatus values */ 881#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 882#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) 883#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) 884#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 885#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) 886#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 887#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 888#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) 889#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 890#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) 891#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) 892#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) 893#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) 894#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) 895#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) 896#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) 897#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) 898#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) 899#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) 900#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) 901 902/*SAS Broadcast Primitive Event data */ 903 904typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { 905 U8 PhyNum; /*0x00 */ 906 U8 Port; /*0x01 */ 907 U8 PortWidth; /*0x02 */ 908 U8 Primitive; /*0x03 */ 909} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 910 *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 911 Mpi2EventDataSasBroadcastPrimitive_t, 912 *pMpi2EventDataSasBroadcastPrimitive_t; 913 914/*defines for the Primitive field */ 915#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) 916#define MPI2_EVENT_PRIMITIVE_SES (0x02) 917#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) 918#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) 919#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) 920#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) 921#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) 922#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) 923 924/*SAS Notify Primitive Event data */ 925 926typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { 927 U8 PhyNum; /*0x00 */ 928 U8 Port; /*0x01 */ 929 U8 Reserved1; /*0x02 */ 930 U8 Primitive; /*0x03 */ 931} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 932 *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 933 Mpi2EventDataSasNotifyPrimitive_t, 934 *pMpi2EventDataSasNotifyPrimitive_t; 935 936/*defines for the Primitive field */ 937#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) 938#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) 939#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) 940#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) 941 942/*SAS Initiator Device Status Change Event data */ 943 944typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { 945 U8 ReasonCode; /*0x00 */ 946 U8 PhysicalPort; /*0x01 */ 947 U16 DevHandle; /*0x02 */ 948 U64 SASAddress; /*0x04 */ 949} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 950 *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 951 Mpi2EventDataSasInitDevStatusChange_t, 952 *pMpi2EventDataSasInitDevStatusChange_t; 953 954/*SAS Initiator Device Status Change event ReasonCode values */ 955#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) 956#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) 957 958/*SAS Initiator Device Table Overflow Event data */ 959 960typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { 961 U16 MaxInit; /*0x00 */ 962 U16 CurrentInit; /*0x02 */ 963 U64 SASAddress; /*0x04 */ 964} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 965 *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 966 Mpi2EventDataSasInitTableOverflow_t, 967 *pMpi2EventDataSasInitTableOverflow_t; 968 969/*SAS Topology Change List Event data */ 970 971/* 972 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to 973 *one and check NumEntries at runtime. 974 */ 975#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT 976#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) 977#endif 978 979typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { 980 U16 AttachedDevHandle; /*0x00 */ 981 U8 LinkRate; /*0x02 */ 982 U8 PhyStatus; /*0x03 */ 983} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, 984 Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t; 985 986typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { 987 U16 EnclosureHandle; /*0x00 */ 988 U16 ExpanderDevHandle; /*0x02 */ 989 U8 NumPhys; /*0x04 */ 990 U8 Reserved1; /*0x05 */ 991 U16 Reserved2; /*0x06 */ 992 U8 NumEntries; /*0x08 */ 993 U8 StartPhyNum; /*0x09 */ 994 U8 ExpStatus; /*0x0A */ 995 U8 PhysicalPort; /*0x0B */ 996 MPI2_EVENT_SAS_TOPO_PHY_ENTRY 997 PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */ 998} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 999 *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 1000 Mpi2EventDataSasTopologyChangeList_t, 1001 *pMpi2EventDataSasTopologyChangeList_t; 1002 1003/*values for the ExpStatus field */ 1004#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) 1005#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) 1006#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) 1007#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) 1008#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) 1009 1010/*defines for the LinkRate field */ 1011#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) 1012#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) 1013#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) 1014#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) 1015 1016#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) 1017#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) 1018#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) 1019#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) 1020#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) 1021#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) 1022#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) 1023#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) 1024#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) 1025#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) 1026#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) 1027#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) 1028 1029/*values for the PhyStatus field */ 1030#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) 1031#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) 1032/*values for the PhyStatus ReasonCode sub-field */ 1033#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) 1034#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) 1035#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) 1036#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) 1037#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) 1038#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) 1039 1040/*SAS Enclosure Device Status Change Event data */ 1041 1042typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { 1043 U16 EnclosureHandle; /*0x00 */ 1044 U8 ReasonCode; /*0x02 */ 1045 U8 PhysicalPort; /*0x03 */ 1046 U64 EnclosureLogicalID; /*0x04 */ 1047 U16 NumSlots; /*0x0C */ 1048 U16 StartSlot; /*0x0E */ 1049 U32 PhyBits; /*0x10 */ 1050} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1051 *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1052 Mpi2EventDataSasEnclDevStatusChange_t, 1053 *pMpi2EventDataSasEnclDevStatusChange_t, 1054 MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, 1055 *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, 1056 Mpi26EventDataEnclDevStatusChange_t, 1057 *pMpi26EventDataEnclDevStatusChange_t; 1058 1059/*SAS Enclosure Device Status Change event ReasonCode values */ 1060#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) 1061#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) 1062 1063/*Enclosure Device Status Change event ReasonCode values */ 1064#define MPI26_EVENT_ENCL_RC_ADDED (0x01) 1065#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) 1066 1067 1068typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR { 1069 U16 DevHandle; /*0x00 */ 1070 U8 ReasonCode; /*0x02 */ 1071 U8 PhysicalPort; /*0x03 */ 1072 U32 Reserved1[2]; /*0x04 */ 1073 U64 SASAddress; /*0x0C */ 1074 U32 Reserved2[2]; /*0x14 */ 1075} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, 1076 *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, 1077 Mpi25EventDataSasDeviceDiscoveryError_t, 1078 *pMpi25EventDataSasDeviceDiscoveryError_t; 1079 1080/*SAS Device Discovery Error Event data ReasonCode values */ 1081#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) 1082#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) 1083 1084/*SAS PHY Counter Event data */ 1085 1086typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { 1087 U64 TimeStamp; /*0x00 */ 1088 U32 Reserved1; /*0x08 */ 1089 U8 PhyEventCode; /*0x0C */ 1090 U8 PhyNum; /*0x0D */ 1091 U16 Reserved2; /*0x0E */ 1092 U32 PhyEventInfo; /*0x10 */ 1093 U8 CounterType; /*0x14 */ 1094 U8 ThresholdWindow; /*0x15 */ 1095 U8 TimeUnits; /*0x16 */ 1096 U8 Reserved3; /*0x17 */ 1097 U32 EventThreshold; /*0x18 */ 1098 U16 ThresholdFlags; /*0x1C */ 1099 U16 Reserved4; /*0x1E */ 1100} MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1101 *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1102 Mpi2EventDataSasPhyCounter_t, 1103 *pMpi2EventDataSasPhyCounter_t; 1104 1105/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h 1106 *for the PhyEventCode field */ 1107 1108/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h 1109 *for the CounterType field */ 1110 1111/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h 1112 *for the TimeUnits field */ 1113 1114/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h 1115 *for the ThresholdFlags field */ 1116 1117/*SAS Quiesce Event data */ 1118 1119typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { 1120 U8 ReasonCode; /*0x00 */ 1121 U8 Reserved1; /*0x01 */ 1122 U16 Reserved2; /*0x02 */ 1123 U32 Reserved3; /*0x04 */ 1124} MPI2_EVENT_DATA_SAS_QUIESCE, 1125 *PTR_MPI2_EVENT_DATA_SAS_QUIESCE, 1126 Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t; 1127 1128/*SAS Quiesce Event data ReasonCode values */ 1129#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) 1130#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) 1131 1132/*Host Based Discovery Phy Event data */ 1133 1134typedef struct _MPI2_EVENT_HBD_PHY_SAS { 1135 U8 Flags; /*0x00 */ 1136 U8 NegotiatedLinkRate; /*0x01 */ 1137 U8 PhyNum; /*0x02 */ 1138 U8 PhysicalPort; /*0x03 */ 1139 U32 Reserved1; /*0x04 */ 1140 U8 InitialFrame[28]; /*0x08 */ 1141} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS, 1142 Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t; 1143 1144/*values for the Flags field */ 1145#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) 1146#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) 1147 1148/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h 1149 *for the NegotiatedLinkRate field */ 1150 1151typedef union _MPI2_EVENT_HBD_DESCRIPTOR { 1152 MPI2_EVENT_HBD_PHY_SAS Sas; 1153} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR, 1154 Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t; 1155 1156typedef struct _MPI2_EVENT_DATA_HBD_PHY { 1157 U8 DescriptorType; /*0x00 */ 1158 U8 Reserved1; /*0x01 */ 1159 U16 Reserved2; /*0x02 */ 1160 U32 Reserved3; /*0x04 */ 1161 MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */ 1162} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY, 1163 Mpi2EventDataHbdPhy_t, 1164 *pMpi2EventDataMpi2EventDataHbdPhy_t; 1165 1166/*values for the DescriptorType field */ 1167#define MPI2_EVENT_HBD_DT_SAS (0x01) 1168 1169 1170/*PCIe Device Status Change Event data (MPI v2.6 and later) */ 1171 1172typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE { 1173 U16 TaskTag; /*0x00 */ 1174 U8 ReasonCode; /*0x02 */ 1175 U8 PhysicalPort; /*0x03 */ 1176 U8 ASC; /*0x04 */ 1177 U8 ASCQ; /*0x05 */ 1178 U16 DevHandle; /*0x06 */ 1179 U32 Reserved2; /*0x08 */ 1180 U64 WWID; /*0x0C */ 1181 U8 LUN[8]; /*0x14 */ 1182} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, 1183 *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, 1184 Mpi26EventDataPCIeDeviceStatusChange_t, 1185 *pMpi26EventDataPCIeDeviceStatusChange_t; 1186 1187/*PCIe Device Status Change Event data ReasonCode values */ 1188#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) 1189#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) 1190#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 1191#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 1192#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 1193#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 1194#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 1195#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 1196#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 1197#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 1198#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) 1199#define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11) 1200 1201 1202/*PCIe Enumeration Event data (MPI v2.6 and later) */ 1203 1204typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { 1205 U8 Flags; /*0x00 */ 1206 U8 ReasonCode; /*0x01 */ 1207 U8 PhysicalPort; /*0x02 */ 1208 U8 Reserved1; /*0x03 */ 1209 U32 EnumerationStatus; /*0x04 */ 1210} MPI26_EVENT_DATA_PCIE_ENUMERATION, 1211 *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, 1212 Mpi26EventDataPCIeEnumeration_t, 1213 *pMpi26EventDataPCIeEnumeration_t; 1214 1215/*PCIe Enumeration Event data Flags values */ 1216#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) 1217#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) 1218 1219/*PCIe Enumeration Event data ReasonCode values */ 1220#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) 1221#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) 1222 1223/*PCIe Enumeration Event data EnumerationStatus values */ 1224#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) 1225#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) 1226#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) 1227 1228 1229/*PCIe Topology Change List Event data (MPI v2.6 and later) */ 1230 1231/* 1232 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1233 *one and check NumEntries at runtime. 1234 */ 1235#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT 1236#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) 1237#endif 1238 1239typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { 1240 U16 AttachedDevHandle; /*0x00 */ 1241 U8 PortStatus; /*0x02 */ 1242 U8 Reserved1; /*0x03 */ 1243 U8 CurrentPortInfo; /*0x04 */ 1244 U8 Reserved2; /*0x05 */ 1245 U8 PreviousPortInfo; /*0x06 */ 1246 U8 Reserved3; /*0x07 */ 1247} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, 1248 *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, 1249 Mpi26EventPCIeTopoPortEntry_t, 1250 *pMpi26EventPCIeTopoPortEntry_t; 1251 1252/*PCIe Topology Change List Event data PortStatus values */ 1253#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) 1254#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) 1255#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) 1256#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) 1257#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) 1258 1259/*PCIe Topology Change List Event data defines for CurrentPortInfo and 1260 *PreviousPortInfo 1261 */ 1262#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) 1263#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) 1264#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) 1265#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) 1266#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) 1267#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) 1268#define MPI26_EVENT_PCIE_TOPO_PI_16_LANES (0x50) 1269 1270#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) 1271#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) 1272#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) 1273#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) 1274#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) 1275#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) 1276#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) 1277 1278typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { 1279 U16 EnclosureHandle; /*0x00 */ 1280 U16 SwitchDevHandle; /*0x02 */ 1281 U8 NumPorts; /*0x04 */ 1282 U8 Reserved1; /*0x05 */ 1283 U16 Reserved2; /*0x06 */ 1284 U8 NumEntries; /*0x08 */ 1285 U8 StartPortNum; /*0x09 */ 1286 U8 SwitchStatus; /*0x0A */ 1287 U8 PhysicalPort; /*0x0B */ 1288 MPI26_EVENT_PCIE_TOPO_PORT_ENTRY 1289 PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */ 1290} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, 1291 *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, 1292 Mpi26EventDataPCIeTopologyChangeList_t, 1293 *pMpi26EventDataPCIeTopologyChangeList_t; 1294 1295/*PCIe Topology Change List Event data SwitchStatus values */ 1296#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) 1297#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) 1298#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) 1299#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) 1300#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) 1301 1302/*PCIe Link Counter Event data (MPI v2.6 and later) */ 1303 1304typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER { 1305 U64 TimeStamp; /*0x00 */ 1306 U32 Reserved1; /*0x08 */ 1307 U8 LinkEventCode; /*0x0C */ 1308 U8 LinkNum; /*0x0D */ 1309 U16 Reserved2; /*0x0E */ 1310 U32 LinkEventInfo; /*0x10 */ 1311 U8 CounterType; /*0x14 */ 1312 U8 ThresholdWindow; /*0x15 */ 1313 U8 TimeUnits; /*0x16 */ 1314 U8 Reserved3; /*0x17 */ 1315 U32 EventThreshold; /*0x18 */ 1316 U16 ThresholdFlags; /*0x1C */ 1317 U16 Reserved4; /*0x1E */ 1318} MPI26_EVENT_DATA_PCIE_LINK_COUNTER, 1319 *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, 1320 Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t; 1321 1322 1323/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode 1324 *field 1325 */ 1326 1327/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType 1328 *field 1329 */ 1330 1331/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits 1332 *field 1333 */ 1334 1335/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags 1336 *field 1337 */ 1338 1339/**************************************************************************** 1340* EventAck message 1341****************************************************************************/ 1342 1343/*EventAck Request message */ 1344typedef struct _MPI2_EVENT_ACK_REQUEST { 1345 U16 Reserved1; /*0x00 */ 1346 U8 ChainOffset; /*0x02 */ 1347 U8 Function; /*0x03 */ 1348 U16 Reserved2; /*0x04 */ 1349 U8 Reserved3; /*0x06 */ 1350 U8 MsgFlags; /*0x07 */ 1351 U8 VP_ID; /*0x08 */ 1352 U8 VF_ID; /*0x09 */ 1353 U16 Reserved4; /*0x0A */ 1354 U16 Event; /*0x0C */ 1355 U16 Reserved5; /*0x0E */ 1356 U32 EventContext; /*0x10 */ 1357} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST, 1358 Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t; 1359 1360/*EventAck Reply message */ 1361typedef struct _MPI2_EVENT_ACK_REPLY { 1362 U16 Reserved1; /*0x00 */ 1363 U8 MsgLength; /*0x02 */ 1364 U8 Function; /*0x03 */ 1365 U16 Reserved2; /*0x04 */ 1366 U8 Reserved3; /*0x06 */ 1367 U8 MsgFlags; /*0x07 */ 1368 U8 VP_ID; /*0x08 */ 1369 U8 VF_ID; /*0x09 */ 1370 U16 Reserved4; /*0x0A */ 1371 U16 Reserved5; /*0x0C */ 1372 U16 IOCStatus; /*0x0E */ 1373 U32 IOCLogInfo; /*0x10 */ 1374} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY, 1375 Mpi2EventAckReply_t, *pMpi2EventAckReply_t; 1376 1377/**************************************************************************** 1378* SendHostMessage message 1379****************************************************************************/ 1380 1381/*SendHostMessage Request message */ 1382typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { 1383 U16 HostDataLength; /*0x00 */ 1384 U8 ChainOffset; /*0x02 */ 1385 U8 Function; /*0x03 */ 1386 U16 Reserved1; /*0x04 */ 1387 U8 Reserved2; /*0x06 */ 1388 U8 MsgFlags; /*0x07 */ 1389 U8 VP_ID; /*0x08 */ 1390 U8 VF_ID; /*0x09 */ 1391 U16 Reserved3; /*0x0A */ 1392 U8 Reserved4; /*0x0C */ 1393 U8 DestVF_ID; /*0x0D */ 1394 U16 Reserved5; /*0x0E */ 1395 U32 Reserved6; /*0x10 */ 1396 U32 Reserved7; /*0x14 */ 1397 U32 Reserved8; /*0x18 */ 1398 U32 Reserved9; /*0x1C */ 1399 U32 Reserved10; /*0x20 */ 1400 U32 HostData[]; /*0x24 */ 1401} MPI2_SEND_HOST_MESSAGE_REQUEST, 1402 *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, 1403 Mpi2SendHostMessageRequest_t, 1404 *pMpi2SendHostMessageRequest_t; 1405 1406/*SendHostMessage Reply message */ 1407typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { 1408 U16 HostDataLength; /*0x00 */ 1409 U8 MsgLength; /*0x02 */ 1410 U8 Function; /*0x03 */ 1411 U16 Reserved1; /*0x04 */ 1412 U8 Reserved2; /*0x06 */ 1413 U8 MsgFlags; /*0x07 */ 1414 U8 VP_ID; /*0x08 */ 1415 U8 VF_ID; /*0x09 */ 1416 U16 Reserved3; /*0x0A */ 1417 U16 Reserved4; /*0x0C */ 1418 U16 IOCStatus; /*0x0E */ 1419 U32 IOCLogInfo; /*0x10 */ 1420} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY, 1421 Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t; 1422 1423/**************************************************************************** 1424* FWDownload message 1425****************************************************************************/ 1426 1427/*MPI v2.0 FWDownload Request message */ 1428typedef struct _MPI2_FW_DOWNLOAD_REQUEST { 1429 U8 ImageType; /*0x00 */ 1430 U8 Reserved1; /*0x01 */ 1431 U8 ChainOffset; /*0x02 */ 1432 U8 Function; /*0x03 */ 1433 U16 Reserved2; /*0x04 */ 1434 U8 Reserved3; /*0x06 */ 1435 U8 MsgFlags; /*0x07 */ 1436 U8 VP_ID; /*0x08 */ 1437 U8 VF_ID; /*0x09 */ 1438 U16 Reserved4; /*0x0A */ 1439 U32 TotalImageSize; /*0x0C */ 1440 U32 Reserved5; /*0x10 */ 1441 MPI2_MPI_SGE_UNION SGL; /*0x14 */ 1442} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST, 1443 Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest; 1444 1445#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) 1446 1447#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) 1448#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) 1449#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) 1450#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) 1451#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) 1452#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) 1453#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) 1454#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1455#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) 1456#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) 1457#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) 1458#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) 1459#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) 1460#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) 1461#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) 1462#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) 1463#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) 1464/*MPI v2.6 and newer */ 1465#define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15) 1466#define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) 1467#define MPI2_FW_DOWNLOAD_ITYPE_COREDUMP (0x17) 1468#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) 1469 1470/*MPI v2.0 FWDownload TransactionContext Element */ 1471typedef struct _MPI2_FW_DOWNLOAD_TCSGE { 1472 U8 Reserved1; /*0x00 */ 1473 U8 ContextSize; /*0x01 */ 1474 U8 DetailsLength; /*0x02 */ 1475 U8 Flags; /*0x03 */ 1476 U32 Reserved2; /*0x04 */ 1477 U32 ImageOffset; /*0x08 */ 1478 U32 ImageSize; /*0x0C */ 1479} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE, 1480 Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t; 1481 1482/*MPI v2.5 FWDownload Request message */ 1483typedef struct _MPI25_FW_DOWNLOAD_REQUEST { 1484 U8 ImageType; /*0x00 */ 1485 U8 Reserved1; /*0x01 */ 1486 U8 ChainOffset; /*0x02 */ 1487 U8 Function; /*0x03 */ 1488 U16 Reserved2; /*0x04 */ 1489 U8 Reserved3; /*0x06 */ 1490 U8 MsgFlags; /*0x07 */ 1491 U8 VP_ID; /*0x08 */ 1492 U8 VF_ID; /*0x09 */ 1493 U16 Reserved4; /*0x0A */ 1494 U32 TotalImageSize; /*0x0C */ 1495 U32 Reserved5; /*0x10 */ 1496 U32 Reserved6; /*0x14 */ 1497 U32 ImageOffset; /*0x18 */ 1498 U32 ImageSize; /*0x1C */ 1499 MPI25_SGE_IO_UNION SGL; /*0x20 */ 1500} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST, 1501 Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest; 1502 1503/*FWDownload Reply message */ 1504typedef struct _MPI2_FW_DOWNLOAD_REPLY { 1505 U8 ImageType; /*0x00 */ 1506 U8 Reserved1; /*0x01 */ 1507 U8 MsgLength; /*0x02 */ 1508 U8 Function; /*0x03 */ 1509 U16 Reserved2; /*0x04 */ 1510 U8 Reserved3; /*0x06 */ 1511 U8 MsgFlags; /*0x07 */ 1512 U8 VP_ID; /*0x08 */ 1513 U8 VF_ID; /*0x09 */ 1514 U16 Reserved4; /*0x0A */ 1515 U16 Reserved5; /*0x0C */ 1516 U16 IOCStatus; /*0x0E */ 1517 U32 IOCLogInfo; /*0x10 */ 1518} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY, 1519 Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t; 1520 1521/**************************************************************************** 1522* FWUpload message 1523****************************************************************************/ 1524 1525/*MPI v2.0 FWUpload Request message */ 1526typedef struct _MPI2_FW_UPLOAD_REQUEST { 1527 U8 ImageType; /*0x00 */ 1528 U8 Reserved1; /*0x01 */ 1529 U8 ChainOffset; /*0x02 */ 1530 U8 Function; /*0x03 */ 1531 U16 Reserved2; /*0x04 */ 1532 U8 Reserved3; /*0x06 */ 1533 U8 MsgFlags; /*0x07 */ 1534 U8 VP_ID; /*0x08 */ 1535 U8 VF_ID; /*0x09 */ 1536 U16 Reserved4; /*0x0A */ 1537 U32 Reserved5; /*0x0C */ 1538 U32 Reserved6; /*0x10 */ 1539 MPI2_MPI_SGE_UNION SGL; /*0x14 */ 1540} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST, 1541 Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t; 1542 1543#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) 1544#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) 1545#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) 1546#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) 1547#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) 1548#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) 1549#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) 1550#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) 1551#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) 1552#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1553#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) 1554#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) 1555#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) 1556#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) 1557#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) 1558#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) 1559#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) 1560#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) 1561 1562 1563/*MPI v2.0 FWUpload TransactionContext Element */ 1564typedef struct _MPI2_FW_UPLOAD_TCSGE { 1565 U8 Reserved1; /*0x00 */ 1566 U8 ContextSize; /*0x01 */ 1567 U8 DetailsLength; /*0x02 */ 1568 U8 Flags; /*0x03 */ 1569 U32 Reserved2; /*0x04 */ 1570 U32 ImageOffset; /*0x08 */ 1571 U32 ImageSize; /*0x0C */ 1572} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE, 1573 Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t; 1574 1575/*MPI v2.5 FWUpload Request message */ 1576typedef struct _MPI25_FW_UPLOAD_REQUEST { 1577 U8 ImageType; /*0x00 */ 1578 U8 Reserved1; /*0x01 */ 1579 U8 ChainOffset; /*0x02 */ 1580 U8 Function; /*0x03 */ 1581 U16 Reserved2; /*0x04 */ 1582 U8 Reserved3; /*0x06 */ 1583 U8 MsgFlags; /*0x07 */ 1584 U8 VP_ID; /*0x08 */ 1585 U8 VF_ID; /*0x09 */ 1586 U16 Reserved4; /*0x0A */ 1587 U32 Reserved5; /*0x0C */ 1588 U32 Reserved6; /*0x10 */ 1589 U32 Reserved7; /*0x14 */ 1590 U32 ImageOffset; /*0x18 */ 1591 U32 ImageSize; /*0x1C */ 1592 MPI25_SGE_IO_UNION SGL; /*0x20 */ 1593} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST, 1594 Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t; 1595 1596/*FWUpload Reply message */ 1597typedef struct _MPI2_FW_UPLOAD_REPLY { 1598 U8 ImageType; /*0x00 */ 1599 U8 Reserved1; /*0x01 */ 1600 U8 MsgLength; /*0x02 */ 1601 U8 Function; /*0x03 */ 1602 U16 Reserved2; /*0x04 */ 1603 U8 Reserved3; /*0x06 */ 1604 U8 MsgFlags; /*0x07 */ 1605 U8 VP_ID; /*0x08 */ 1606 U8 VF_ID; /*0x09 */ 1607 U16 Reserved4; /*0x0A */ 1608 U16 Reserved5; /*0x0C */ 1609 U16 IOCStatus; /*0x0E */ 1610 U32 IOCLogInfo; /*0x10 */ 1611 U32 ActualImageSize; /*0x14 */ 1612} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, 1613 Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; 1614 1615 1616/**************************************************************************** 1617* PowerManagementControl message 1618****************************************************************************/ 1619 1620/*PowerManagementControl Request message */ 1621typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { 1622 U8 Feature; /*0x00 */ 1623 U8 Reserved1; /*0x01 */ 1624 U8 ChainOffset; /*0x02 */ 1625 U8 Function; /*0x03 */ 1626 U16 Reserved2; /*0x04 */ 1627 U8 Reserved3; /*0x06 */ 1628 U8 MsgFlags; /*0x07 */ 1629 U8 VP_ID; /*0x08 */ 1630 U8 VF_ID; /*0x09 */ 1631 U16 Reserved4; /*0x0A */ 1632 U8 Parameter1; /*0x0C */ 1633 U8 Parameter2; /*0x0D */ 1634 U8 Parameter3; /*0x0E */ 1635 U8 Parameter4; /*0x0F */ 1636 U32 Reserved5; /*0x10 */ 1637 U32 Reserved6; /*0x14 */ 1638} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, 1639 Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t; 1640 1641/*defines for the Feature field */ 1642#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) 1643#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) 1644#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */ 1645#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) 1646#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) 1647#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) 1648#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) 1649 1650/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ 1651/*Parameter1 contains a PHY number */ 1652/*Parameter2 indicates power condition action using these defines */ 1653#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) 1654#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) 1655#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) 1656/*Parameter3 and Parameter4 are reserved */ 1657 1658/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION 1659 * Feature */ 1660/*Parameter1 contains SAS port width modulation group number */ 1661/*Parameter2 indicates IOC action using these defines */ 1662#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) 1663#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) 1664#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) 1665/*Parameter3 indicates desired modulation level using these defines */ 1666#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) 1667#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) 1668#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) 1669#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) 1670/*Parameter4 is reserved */ 1671 1672/*this next set (_PCIE_LINK) is obsolete */ 1673/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ 1674/*Parameter1 indicates desired PCIe link speed using these defines */ 1675#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */ 1676#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */ 1677#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */ 1678/*Parameter2 indicates desired PCIe link width using these defines */ 1679#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */ 1680#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */ 1681#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */ 1682#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */ 1683/*Parameter3 and Parameter4 are reserved */ 1684 1685/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ 1686/*Parameter1 indicates desired IOC hardware clock speed using these defines */ 1687#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) 1688#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) 1689#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) 1690#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) 1691/*Parameter2, Parameter3, and Parameter4 are reserved */ 1692 1693/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/ 1694/*Parameter1 indicates host action regarding global power management mode */ 1695#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) 1696#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) 1697#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) 1698/*Parameter2 indicates the requested global power management mode */ 1699#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) 1700#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) 1701#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) 1702/*Parameter3 and Parameter4 are reserved */ 1703 1704/*PowerManagementControl Reply message */ 1705typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { 1706 U8 Feature; /*0x00 */ 1707 U8 Reserved1; /*0x01 */ 1708 U8 MsgLength; /*0x02 */ 1709 U8 Function; /*0x03 */ 1710 U16 Reserved2; /*0x04 */ 1711 U8 Reserved3; /*0x06 */ 1712 U8 MsgFlags; /*0x07 */ 1713 U8 VP_ID; /*0x08 */ 1714 U8 VF_ID; /*0x09 */ 1715 U16 Reserved4; /*0x0A */ 1716 U16 Reserved5; /*0x0C */ 1717 U16 IOCStatus; /*0x0E */ 1718 U32 IOCLogInfo; /*0x10 */ 1719} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, 1720 Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; 1721 1722/**************************************************************************** 1723* IO Unit Control messages (MPI v2.6 and later only.) 1724****************************************************************************/ 1725 1726/* IO Unit Control Request Message */ 1727typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { 1728 U8 Operation; /* 0x00 */ 1729 U8 Reserved1; /* 0x01 */ 1730 U8 ChainOffset; /* 0x02 */ 1731 U8 Function; /* 0x03 */ 1732 U16 DevHandle; /* 0x04 */ 1733 U8 IOCParameter; /* 0x06 */ 1734 U8 MsgFlags; /* 0x07 */ 1735 U8 VP_ID; /* 0x08 */ 1736 U8 VF_ID; /* 0x09 */ 1737 U16 Reserved3; /* 0x0A */ 1738 U16 Reserved4; /* 0x0C */ 1739 U8 PhyNum; /* 0x0E */ 1740 U8 PrimFlags; /* 0x0F */ 1741 U32 Primitive; /* 0x10 */ 1742 U8 LookupMethod; /* 0x14 */ 1743 U8 Reserved5; /* 0x15 */ 1744 U16 SlotNumber; /* 0x16 */ 1745 U64 LookupAddress; /* 0x18 */ 1746 U32 IOCParameterValue; /* 0x20 */ 1747 U32 Reserved7; /* 0x24 */ 1748 U32 Reserved8; /* 0x28 */ 1749} MPI26_IOUNIT_CONTROL_REQUEST, 1750 *PTR_MPI26_IOUNIT_CONTROL_REQUEST, 1751 Mpi26IoUnitControlRequest_t, 1752 *pMpi26IoUnitControlRequest_t; 1753 1754/* values for the Operation field */ 1755#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) 1756#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) 1757#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) 1758#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) 1759#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) 1760#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) 1761#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) 1762#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) 1763#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) 1764#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) 1765#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) 1766#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) 1767#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) 1768#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) 1769#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) 1770#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) 1771#define MPI26_CTRL_OP_SHUTDOWN (0x16) 1772#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) 1773#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) 1774#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) 1775#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) 1776#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) 1777#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) 1778 1779/* values for the PrimFlags field */ 1780#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) 1781#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) 1782#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) 1783 1784/* values for the LookupMethod field */ 1785#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) 1786#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) 1787#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) 1788 1789 1790/* IO Unit Control Reply Message */ 1791typedef struct _MPI26_IOUNIT_CONTROL_REPLY { 1792 U8 Operation; /* 0x00 */ 1793 U8 Reserved1; /* 0x01 */ 1794 U8 MsgLength; /* 0x02 */ 1795 U8 Function; /* 0x03 */ 1796 U16 DevHandle; /* 0x04 */ 1797 U8 IOCParameter; /* 0x06 */ 1798 U8 MsgFlags; /* 0x07 */ 1799 U8 VP_ID; /* 0x08 */ 1800 U8 VF_ID; /* 0x09 */ 1801 U16 Reserved3; /* 0x0A */ 1802 U16 Reserved4; /* 0x0C */ 1803 U16 IOCStatus; /* 0x0E */ 1804 U32 IOCLogInfo; /* 0x10 */ 1805} MPI26_IOUNIT_CONTROL_REPLY, 1806 *PTR_MPI26_IOUNIT_CONTROL_REPLY, 1807 Mpi26IoUnitControlReply_t, 1808 *pMpi26IoUnitControlReply_t; 1809 1810 1811#endif