sense_codes.h (43826B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * The canonical list of T10 Additional Sense Codes is available at: 4 * http://www.t10.org/lists/asc-num.txt [most recent: 20200817] 5 */ 6 7SENSE_CODE(0x0000, "No additional sense information") 8SENSE_CODE(0x0001, "Filemark detected") 9SENSE_CODE(0x0002, "End-of-partition/medium detected") 10SENSE_CODE(0x0003, "Setmark detected") 11SENSE_CODE(0x0004, "Beginning-of-partition/medium detected") 12SENSE_CODE(0x0005, "End-of-data detected") 13SENSE_CODE(0x0006, "I/O process terminated") 14SENSE_CODE(0x0007, "Programmable early warning detected") 15SENSE_CODE(0x0011, "Audio play operation in progress") 16SENSE_CODE(0x0012, "Audio play operation paused") 17SENSE_CODE(0x0013, "Audio play operation successfully completed") 18SENSE_CODE(0x0014, "Audio play operation stopped due to error") 19SENSE_CODE(0x0015, "No current audio status to return") 20SENSE_CODE(0x0016, "Operation in progress") 21SENSE_CODE(0x0017, "Cleaning requested") 22SENSE_CODE(0x0018, "Erase operation in progress") 23SENSE_CODE(0x0019, "Locate operation in progress") 24SENSE_CODE(0x001A, "Rewind operation in progress") 25SENSE_CODE(0x001B, "Set capacity operation in progress") 26SENSE_CODE(0x001C, "Verify operation in progress") 27SENSE_CODE(0x001D, "ATA pass through information available") 28SENSE_CODE(0x001E, "Conflicting SA creation request") 29SENSE_CODE(0x001F, "Logical unit transitioning to another power condition") 30SENSE_CODE(0x0020, "Extended copy information available") 31SENSE_CODE(0x0021, "Atomic command aborted due to ACA") 32SENSE_CODE(0x0022, "Deferred microcode is pending") 33 34SENSE_CODE(0x0100, "No index/sector signal") 35 36SENSE_CODE(0x0200, "No seek complete") 37 38SENSE_CODE(0x0300, "Peripheral device write fault") 39SENSE_CODE(0x0301, "No write current") 40SENSE_CODE(0x0302, "Excessive write errors") 41 42SENSE_CODE(0x0400, "Logical unit not ready, cause not reportable") 43SENSE_CODE(0x0401, "Logical unit is in process of becoming ready") 44SENSE_CODE(0x0402, "Logical unit not ready, initializing command required") 45SENSE_CODE(0x0403, "Logical unit not ready, manual intervention required") 46SENSE_CODE(0x0404, "Logical unit not ready, format in progress") 47SENSE_CODE(0x0405, "Logical unit not ready, rebuild in progress") 48SENSE_CODE(0x0406, "Logical unit not ready, recalculation in progress") 49SENSE_CODE(0x0407, "Logical unit not ready, operation in progress") 50SENSE_CODE(0x0408, "Logical unit not ready, long write in progress") 51SENSE_CODE(0x0409, "Logical unit not ready, self-test in progress") 52SENSE_CODE(0x040A, "Logical unit not accessible, asymmetric access state transition") 53SENSE_CODE(0x040B, "Logical unit not accessible, target port in standby state") 54SENSE_CODE(0x040C, "Logical unit not accessible, target port in unavailable state") 55SENSE_CODE(0x040D, "Logical unit not ready, structure check required") 56SENSE_CODE(0x040E, "Logical unit not ready, security session in progress") 57SENSE_CODE(0x0410, "Logical unit not ready, auxiliary memory not accessible") 58SENSE_CODE(0x0411, "Logical unit not ready, notify (enable spinup) required") 59SENSE_CODE(0x0412, "Logical unit not ready, offline") 60SENSE_CODE(0x0413, "Logical unit not ready, SA creation in progress") 61SENSE_CODE(0x0414, "Logical unit not ready, space allocation in progress") 62SENSE_CODE(0x0415, "Logical unit not ready, robotics disabled") 63SENSE_CODE(0x0416, "Logical unit not ready, configuration required") 64SENSE_CODE(0x0417, "Logical unit not ready, calibration required") 65SENSE_CODE(0x0418, "Logical unit not ready, a door is open") 66SENSE_CODE(0x0419, "Logical unit not ready, operating in sequential mode") 67SENSE_CODE(0x041A, "Logical unit not ready, start stop unit command in progress") 68SENSE_CODE(0x041B, "Logical unit not ready, sanitize in progress") 69SENSE_CODE(0x041C, "Logical unit not ready, additional power use not yet granted") 70SENSE_CODE(0x041D, "Logical unit not ready, configuration in progress") 71SENSE_CODE(0x041E, "Logical unit not ready, microcode activation required") 72SENSE_CODE(0x041F, "Logical unit not ready, microcode download required") 73SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required") 74SENSE_CODE(0x0421, "Logical unit not ready, hard reset required") 75SENSE_CODE(0x0422, "Logical unit not ready, power cycle required") 76SENSE_CODE(0x0423, "Logical unit not ready, affiliation required") 77SENSE_CODE(0x0424, "Depopulation in progress") 78SENSE_CODE(0x0425, "Depopulation restoration in progress") 79 80SENSE_CODE(0x0500, "Logical unit does not respond to selection") 81 82SENSE_CODE(0x0600, "No reference position found") 83 84SENSE_CODE(0x0700, "Multiple peripheral devices selected") 85 86SENSE_CODE(0x0800, "Logical unit communication failure") 87SENSE_CODE(0x0801, "Logical unit communication time-out") 88SENSE_CODE(0x0802, "Logical unit communication parity error") 89SENSE_CODE(0x0803, "Logical unit communication CRC error (Ultra-DMA/32)") 90SENSE_CODE(0x0804, "Unreachable copy target") 91 92SENSE_CODE(0x0900, "Track following error") 93SENSE_CODE(0x0901, "Tracking servo failure") 94SENSE_CODE(0x0902, "Focus servo failure") 95SENSE_CODE(0x0903, "Spindle servo failure") 96SENSE_CODE(0x0904, "Head select fault") 97SENSE_CODE(0x0905, "Vibration induced tracking error") 98 99SENSE_CODE(0x0A00, "Error log overflow") 100 101SENSE_CODE(0x0B00, "Warning") 102SENSE_CODE(0x0B01, "Warning - specified temperature exceeded") 103SENSE_CODE(0x0B02, "Warning - enclosure degraded") 104SENSE_CODE(0x0B03, "Warning - background self-test failed") 105SENSE_CODE(0x0B04, "Warning - background pre-scan detected medium error") 106SENSE_CODE(0x0B05, "Warning - background medium scan detected medium error") 107SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile") 108SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache") 109SENSE_CODE(0x0B08, "Warning - power loss expected") 110SENSE_CODE(0x0B09, "Warning - device statistics notification active") 111SENSE_CODE(0x0B0A, "Warning - high critical temperature limit exceeded") 112SENSE_CODE(0x0B0B, "Warning - low critical temperature limit exceeded") 113SENSE_CODE(0x0B0C, "Warning - high operating temperature limit exceeded") 114SENSE_CODE(0x0B0D, "Warning - low operating temperature limit exceeded") 115SENSE_CODE(0x0B0E, "Warning - high critical humidity limit exceeded") 116SENSE_CODE(0x0B0F, "Warning - low critical humidity limit exceeded") 117SENSE_CODE(0x0B10, "Warning - high operating humidity limit exceeded") 118SENSE_CODE(0x0B11, "Warning - low operating humidity limit exceeded") 119SENSE_CODE(0x0B12, "Warning - microcode security at risk") 120SENSE_CODE(0x0B13, "Warning - microcode digital signature validation failure") 121SENSE_CODE(0x0B14, "Warning - physical element status change") 122 123SENSE_CODE(0x0C00, "Write error") 124SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation") 125SENSE_CODE(0x0C02, "Write error - auto reallocation failed") 126SENSE_CODE(0x0C03, "Write error - recommend reassignment") 127SENSE_CODE(0x0C04, "Compression check miscompare error") 128SENSE_CODE(0x0C05, "Data expansion occurred during compression") 129SENSE_CODE(0x0C06, "Block not compressible") 130SENSE_CODE(0x0C07, "Write error - recovery needed") 131SENSE_CODE(0x0C08, "Write error - recovery failed") 132SENSE_CODE(0x0C09, "Write error - loss of streaming") 133SENSE_CODE(0x0C0A, "Write error - padding blocks added") 134SENSE_CODE(0x0C0B, "Auxiliary memory write error") 135SENSE_CODE(0x0C0C, "Write error - unexpected unsolicited data") 136SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data") 137SENSE_CODE(0x0C0E, "Multiple write errors") 138SENSE_CODE(0x0C0F, "Defects in error window") 139SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations") 140SENSE_CODE(0x0C11, "Write error - recovery scan needed") 141SENSE_CODE(0x0C12, "Write error - insufficient zone resources") 142 143SENSE_CODE(0x0D00, "Error detected by third party temporary initiator") 144SENSE_CODE(0x0D01, "Third party device failure") 145SENSE_CODE(0x0D02, "Copy target device not reachable") 146SENSE_CODE(0x0D03, "Incorrect copy target device type") 147SENSE_CODE(0x0D04, "Copy target device data underrun") 148SENSE_CODE(0x0D05, "Copy target device data overrun") 149 150SENSE_CODE(0x0E00, "Invalid information unit") 151SENSE_CODE(0x0E01, "Information unit too short") 152SENSE_CODE(0x0E02, "Information unit too long") 153SENSE_CODE(0x0E03, "Invalid field in command information unit") 154 155SENSE_CODE(0x1000, "Id CRC or ECC error") 156SENSE_CODE(0x1001, "Logical block guard check failed") 157SENSE_CODE(0x1002, "Logical block application tag check failed") 158SENSE_CODE(0x1003, "Logical block reference tag check failed") 159SENSE_CODE(0x1004, "Logical block protection error on recover buffered data") 160SENSE_CODE(0x1005, "Logical block protection method error") 161 162SENSE_CODE(0x1100, "Unrecovered read error") 163SENSE_CODE(0x1101, "Read retries exhausted") 164SENSE_CODE(0x1102, "Error too long to correct") 165SENSE_CODE(0x1103, "Multiple read errors") 166SENSE_CODE(0x1104, "Unrecovered read error - auto reallocate failed") 167SENSE_CODE(0x1105, "L-EC uncorrectable error") 168SENSE_CODE(0x1106, "CIRC unrecovered error") 169SENSE_CODE(0x1107, "Data re-synchronization error") 170SENSE_CODE(0x1108, "Incomplete block read") 171SENSE_CODE(0x1109, "No gap found") 172SENSE_CODE(0x110A, "Miscorrected error") 173SENSE_CODE(0x110B, "Unrecovered read error - recommend reassignment") 174SENSE_CODE(0x110C, "Unrecovered read error - recommend rewrite the data") 175SENSE_CODE(0x110D, "De-compression CRC error") 176SENSE_CODE(0x110E, "Cannot decompress using declared algorithm") 177SENSE_CODE(0x110F, "Error reading UPC/EAN number") 178SENSE_CODE(0x1110, "Error reading ISRC number") 179SENSE_CODE(0x1111, "Read error - loss of streaming") 180SENSE_CODE(0x1112, "Auxiliary memory read error") 181SENSE_CODE(0x1113, "Read error - failed retransmission request") 182SENSE_CODE(0x1114, "Read error - lba marked bad by application client") 183SENSE_CODE(0x1115, "Write after sanitize required") 184 185SENSE_CODE(0x1200, "Address mark not found for id field") 186 187SENSE_CODE(0x1300, "Address mark not found for data field") 188 189SENSE_CODE(0x1400, "Recorded entity not found") 190SENSE_CODE(0x1401, "Record not found") 191SENSE_CODE(0x1402, "Filemark or setmark not found") 192SENSE_CODE(0x1403, "End-of-data not found") 193SENSE_CODE(0x1404, "Block sequence error") 194SENSE_CODE(0x1405, "Record not found - recommend reassignment") 195SENSE_CODE(0x1406, "Record not found - data auto-reallocated") 196SENSE_CODE(0x1407, "Locate operation failure") 197 198SENSE_CODE(0x1500, "Random positioning error") 199SENSE_CODE(0x1501, "Mechanical positioning error") 200SENSE_CODE(0x1502, "Positioning error detected by read of medium") 201 202SENSE_CODE(0x1600, "Data synchronization mark error") 203SENSE_CODE(0x1601, "Data sync error - data rewritten") 204SENSE_CODE(0x1602, "Data sync error - recommend rewrite") 205SENSE_CODE(0x1603, "Data sync error - data auto-reallocated") 206SENSE_CODE(0x1604, "Data sync error - recommend reassignment") 207 208SENSE_CODE(0x1700, "Recovered data with no error correction applied") 209SENSE_CODE(0x1701, "Recovered data with retries") 210SENSE_CODE(0x1702, "Recovered data with positive head offset") 211SENSE_CODE(0x1703, "Recovered data with negative head offset") 212SENSE_CODE(0x1704, "Recovered data with retries and/or circ applied") 213SENSE_CODE(0x1705, "Recovered data using previous sector id") 214SENSE_CODE(0x1706, "Recovered data without ECC - data auto-reallocated") 215SENSE_CODE(0x1707, "Recovered data without ECC - recommend reassignment") 216SENSE_CODE(0x1708, "Recovered data without ECC - recommend rewrite") 217SENSE_CODE(0x1709, "Recovered data without ECC - data rewritten") 218 219SENSE_CODE(0x1800, "Recovered data with error correction applied") 220SENSE_CODE(0x1801, "Recovered data with error corr. & retries applied") 221SENSE_CODE(0x1802, "Recovered data - data auto-reallocated") 222SENSE_CODE(0x1803, "Recovered data with CIRC") 223SENSE_CODE(0x1804, "Recovered data with L-EC") 224SENSE_CODE(0x1805, "Recovered data - recommend reassignment") 225SENSE_CODE(0x1806, "Recovered data - recommend rewrite") 226SENSE_CODE(0x1807, "Recovered data with ECC - data rewritten") 227SENSE_CODE(0x1808, "Recovered data with linking") 228 229SENSE_CODE(0x1900, "Defect list error") 230SENSE_CODE(0x1901, "Defect list not available") 231SENSE_CODE(0x1902, "Defect list error in primary list") 232SENSE_CODE(0x1903, "Defect list error in grown list") 233 234SENSE_CODE(0x1A00, "Parameter list length error") 235 236SENSE_CODE(0x1B00, "Synchronous data transfer error") 237 238SENSE_CODE(0x1C00, "Defect list not found") 239SENSE_CODE(0x1C01, "Primary defect list not found") 240SENSE_CODE(0x1C02, "Grown defect list not found") 241 242SENSE_CODE(0x1D00, "Miscompare during verify operation") 243SENSE_CODE(0x1D01, "Miscompare verify of unmapped LBA") 244 245SENSE_CODE(0x1E00, "Recovered id with ECC correction") 246 247SENSE_CODE(0x1F00, "Partial defect list transfer") 248 249SENSE_CODE(0x2000, "Invalid command operation code") 250SENSE_CODE(0x2001, "Access denied - initiator pending-enrolled") 251SENSE_CODE(0x2002, "Access denied - no access rights") 252SENSE_CODE(0x2003, "Access denied - invalid mgmt id key") 253SENSE_CODE(0x2004, "Illegal command while in write capable state") 254SENSE_CODE(0x2005, "Obsolete") 255SENSE_CODE(0x2006, "Illegal command while in explicit address mode") 256SENSE_CODE(0x2007, "Illegal command while in implicit address mode") 257SENSE_CODE(0x2008, "Access denied - enrollment conflict") 258SENSE_CODE(0x2009, "Access denied - invalid LU identifier") 259SENSE_CODE(0x200A, "Access denied - invalid proxy token") 260SENSE_CODE(0x200B, "Access denied - ACL LUN conflict") 261SENSE_CODE(0x200C, "Illegal command when not in append-only mode") 262SENSE_CODE(0x200D, "Not an administrative logical unit") 263SENSE_CODE(0x200E, "Not a subsidiary logical unit") 264SENSE_CODE(0x200F, "Not a conglomerate logical unit") 265 266SENSE_CODE(0x2100, "Logical block address out of range") 267SENSE_CODE(0x2101, "Invalid element address") 268SENSE_CODE(0x2102, "Invalid address for write") 269SENSE_CODE(0x2103, "Invalid write crossing layer jump") 270SENSE_CODE(0x2104, "Unaligned write command") 271SENSE_CODE(0x2105, "Write boundary violation") 272SENSE_CODE(0x2106, "Attempt to read invalid data") 273SENSE_CODE(0x2107, "Read boundary violation") 274SENSE_CODE(0x2108, "Misaligned write command") 275SENSE_CODE(0x2109, "Attempt to access gap zone") 276 277SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)") 278 279SENSE_CODE(0x2300, "Invalid token operation, cause not reportable") 280SENSE_CODE(0x2301, "Invalid token operation, unsupported token type") 281SENSE_CODE(0x2302, "Invalid token operation, remote token usage not supported") 282SENSE_CODE(0x2303, "Invalid token operation, remote rod token creation not supported") 283SENSE_CODE(0x2304, "Invalid token operation, token unknown") 284SENSE_CODE(0x2305, "Invalid token operation, token corrupt") 285SENSE_CODE(0x2306, "Invalid token operation, token revoked") 286SENSE_CODE(0x2307, "Invalid token operation, token expired") 287SENSE_CODE(0x2308, "Invalid token operation, token cancelled") 288SENSE_CODE(0x2309, "Invalid token operation, token deleted") 289SENSE_CODE(0x230A, "Invalid token operation, invalid token length") 290 291SENSE_CODE(0x2400, "Invalid field in cdb") 292SENSE_CODE(0x2401, "CDB decryption error") 293SENSE_CODE(0x2402, "Obsolete") 294SENSE_CODE(0x2403, "Obsolete") 295SENSE_CODE(0x2404, "Security audit value frozen") 296SENSE_CODE(0x2405, "Security working key frozen") 297SENSE_CODE(0x2406, "Nonce not unique") 298SENSE_CODE(0x2407, "Nonce timestamp out of range") 299SENSE_CODE(0x2408, "Invalid XCDB") 300SENSE_CODE(0x2409, "Invalid fast format") 301 302SENSE_CODE(0x2500, "Logical unit not supported") 303 304SENSE_CODE(0x2600, "Invalid field in parameter list") 305SENSE_CODE(0x2601, "Parameter not supported") 306SENSE_CODE(0x2602, "Parameter value invalid") 307SENSE_CODE(0x2603, "Threshold parameters not supported") 308SENSE_CODE(0x2604, "Invalid release of persistent reservation") 309SENSE_CODE(0x2605, "Data decryption error") 310SENSE_CODE(0x2606, "Too many target descriptors") 311SENSE_CODE(0x2607, "Unsupported target descriptor type code") 312SENSE_CODE(0x2608, "Too many segment descriptors") 313SENSE_CODE(0x2609, "Unsupported segment descriptor type code") 314SENSE_CODE(0x260A, "Unexpected inexact segment") 315SENSE_CODE(0x260B, "Inline data length exceeded") 316SENSE_CODE(0x260C, "Invalid operation for copy source or destination") 317SENSE_CODE(0x260D, "Copy segment granularity violation") 318SENSE_CODE(0x260E, "Invalid parameter while port is enabled") 319SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value") 320SENSE_CODE(0x2610, "Data decryption key fail limit reached") 321SENSE_CODE(0x2611, "Incomplete key-associated data set") 322SENSE_CODE(0x2612, "Vendor specific key reference not found") 323SENSE_CODE(0x2613, "Application tag mode page is invalid") 324SENSE_CODE(0x2614, "Tape stream mirroring prevented") 325SENSE_CODE(0x2615, "Copy source or copy destination not authorized") 326SENSE_CODE(0x2616, "Fast copy not possible") 327 328SENSE_CODE(0x2700, "Write protected") 329SENSE_CODE(0x2701, "Hardware write protected") 330SENSE_CODE(0x2702, "Logical unit software write protected") 331SENSE_CODE(0x2703, "Associated write protect") 332SENSE_CODE(0x2704, "Persistent write protect") 333SENSE_CODE(0x2705, "Permanent write protect") 334SENSE_CODE(0x2706, "Conditional write protect") 335SENSE_CODE(0x2707, "Space allocation failed write protect") 336SENSE_CODE(0x2708, "Zone is read only") 337 338SENSE_CODE(0x2800, "Not ready to ready change, medium may have changed") 339SENSE_CODE(0x2801, "Import or export element accessed") 340SENSE_CODE(0x2802, "Format-layer may have changed") 341SENSE_CODE(0x2803, "Import/export element accessed, medium changed") 342 343SENSE_CODE(0x2900, "Power on, reset, or bus device reset occurred") 344SENSE_CODE(0x2901, "Power on occurred") 345SENSE_CODE(0x2902, "Scsi bus reset occurred") 346SENSE_CODE(0x2903, "Bus device reset function occurred") 347SENSE_CODE(0x2904, "Device internal reset") 348SENSE_CODE(0x2905, "Transceiver mode changed to single-ended") 349SENSE_CODE(0x2906, "Transceiver mode changed to lvd") 350SENSE_CODE(0x2907, "I_T nexus loss occurred") 351 352SENSE_CODE(0x2A00, "Parameters changed") 353SENSE_CODE(0x2A01, "Mode parameters changed") 354SENSE_CODE(0x2A02, "Log parameters changed") 355SENSE_CODE(0x2A03, "Reservations preempted") 356SENSE_CODE(0x2A04, "Reservations released") 357SENSE_CODE(0x2A05, "Registrations preempted") 358SENSE_CODE(0x2A06, "Asymmetric access state changed") 359SENSE_CODE(0x2A07, "Implicit asymmetric access state transition failed") 360SENSE_CODE(0x2A08, "Priority changed") 361SENSE_CODE(0x2A09, "Capacity data has changed") 362SENSE_CODE(0x2A0A, "Error history I_T nexus cleared") 363SENSE_CODE(0x2A0B, "Error history snapshot released") 364SENSE_CODE(0x2A0C, "Error recovery attributes have changed") 365SENSE_CODE(0x2A0D, "Data encryption capabilities changed") 366SENSE_CODE(0x2A10, "Timestamp changed") 367SENSE_CODE(0x2A11, "Data encryption parameters changed by another i_t nexus") 368SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific event") 369SENSE_CODE(0x2A13, "Data encryption key instance counter has changed") 370SENSE_CODE(0x2A14, "SA creation capabilities data has changed") 371SENSE_CODE(0x2A15, "Medium removal prevention preempted") 372SENSE_CODE(0x2A16, "Zone reset write pointer recommended") 373 374SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect") 375 376SENSE_CODE(0x2C00, "Command sequence error") 377SENSE_CODE(0x2C01, "Too many windows specified") 378SENSE_CODE(0x2C02, "Invalid combination of windows specified") 379SENSE_CODE(0x2C03, "Current program area is not empty") 380SENSE_CODE(0x2C04, "Current program area is empty") 381SENSE_CODE(0x2C05, "Illegal power condition request") 382SENSE_CODE(0x2C06, "Persistent prevent conflict") 383SENSE_CODE(0x2C07, "Previous busy status") 384SENSE_CODE(0x2C08, "Previous task set full status") 385SENSE_CODE(0x2C09, "Previous reservation conflict status") 386SENSE_CODE(0x2C0A, "Partition or collection contains user objects") 387SENSE_CODE(0x2C0B, "Not reserved") 388SENSE_CODE(0x2C0C, "Orwrite generation does not match") 389SENSE_CODE(0x2C0D, "Reset write pointer not allowed") 390SENSE_CODE(0x2C0E, "Zone is offline") 391SENSE_CODE(0x2C0F, "Stream not open") 392SENSE_CODE(0x2C10, "Unwritten data in zone") 393SENSE_CODE(0x2C11, "Descriptor format sense data required") 394SENSE_CODE(0x2C12, "Zone is inactive") 395SENSE_CODE(0x2C13, "Well known logical unit access required") 396 397SENSE_CODE(0x2D00, "Overwrite error on update in place") 398 399SENSE_CODE(0x2E00, "Insufficient time for operation") 400SENSE_CODE(0x2E01, "Command timeout before processing") 401SENSE_CODE(0x2E02, "Command timeout during processing") 402SENSE_CODE(0x2E03, "Command timeout during processing due to error recovery") 403 404SENSE_CODE(0x2F00, "Commands cleared by another initiator") 405SENSE_CODE(0x2F01, "Commands cleared by power loss notification") 406SENSE_CODE(0x2F02, "Commands cleared by device server") 407SENSE_CODE(0x2F03, "Some commands cleared by queuing layer event") 408 409SENSE_CODE(0x3000, "Incompatible medium installed") 410SENSE_CODE(0x3001, "Cannot read medium - unknown format") 411SENSE_CODE(0x3002, "Cannot read medium - incompatible format") 412SENSE_CODE(0x3003, "Cleaning cartridge installed") 413SENSE_CODE(0x3004, "Cannot write medium - unknown format") 414SENSE_CODE(0x3005, "Cannot write medium - incompatible format") 415SENSE_CODE(0x3006, "Cannot format medium - incompatible medium") 416SENSE_CODE(0x3007, "Cleaning failure") 417SENSE_CODE(0x3008, "Cannot write - application code mismatch") 418SENSE_CODE(0x3009, "Current session not fixated for append") 419SENSE_CODE(0x300A, "Cleaning request rejected") 420SENSE_CODE(0x300C, "WORM medium - overwrite attempted") 421SENSE_CODE(0x300D, "WORM medium - integrity check") 422SENSE_CODE(0x3010, "Medium not formatted") 423SENSE_CODE(0x3011, "Incompatible volume type") 424SENSE_CODE(0x3012, "Incompatible volume qualifier") 425SENSE_CODE(0x3013, "Cleaning volume expired") 426 427SENSE_CODE(0x3100, "Medium format corrupted") 428SENSE_CODE(0x3101, "Format command failed") 429SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking") 430SENSE_CODE(0x3103, "Sanitize command failed") 431SENSE_CODE(0x3104, "Depopulation failed") 432SENSE_CODE(0x3105, "Depopulation restoration failed") 433 434SENSE_CODE(0x3200, "No defect spare location available") 435SENSE_CODE(0x3201, "Defect list update failure") 436 437SENSE_CODE(0x3300, "Tape length error") 438 439SENSE_CODE(0x3400, "Enclosure failure") 440 441SENSE_CODE(0x3500, "Enclosure services failure") 442SENSE_CODE(0x3501, "Unsupported enclosure function") 443SENSE_CODE(0x3502, "Enclosure services unavailable") 444SENSE_CODE(0x3503, "Enclosure services transfer failure") 445SENSE_CODE(0x3504, "Enclosure services transfer refused") 446SENSE_CODE(0x3505, "Enclosure services checksum error") 447 448SENSE_CODE(0x3600, "Ribbon, ink, or toner failure") 449 450SENSE_CODE(0x3700, "Rounded parameter") 451 452SENSE_CODE(0x3800, "Event status notification") 453SENSE_CODE(0x3802, "Esn - power management class event") 454SENSE_CODE(0x3804, "Esn - media class event") 455SENSE_CODE(0x3806, "Esn - device busy class event") 456SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached") 457SENSE_CODE(0x3808, "Depopulation interrupted") 458 459SENSE_CODE(0x3900, "Saving parameters not supported") 460 461SENSE_CODE(0x3A00, "Medium not present") 462SENSE_CODE(0x3A01, "Medium not present - tray closed") 463SENSE_CODE(0x3A02, "Medium not present - tray open") 464SENSE_CODE(0x3A03, "Medium not present - loadable") 465SENSE_CODE(0x3A04, "Medium not present - medium auxiliary memory accessible") 466 467SENSE_CODE(0x3B00, "Sequential positioning error") 468SENSE_CODE(0x3B01, "Tape position error at beginning-of-medium") 469SENSE_CODE(0x3B02, "Tape position error at end-of-medium") 470SENSE_CODE(0x3B03, "Tape or electronic vertical forms unit not ready") 471SENSE_CODE(0x3B04, "Slew failure") 472SENSE_CODE(0x3B05, "Paper jam") 473SENSE_CODE(0x3B06, "Failed to sense top-of-form") 474SENSE_CODE(0x3B07, "Failed to sense bottom-of-form") 475SENSE_CODE(0x3B08, "Reposition error") 476SENSE_CODE(0x3B09, "Read past end of medium") 477SENSE_CODE(0x3B0A, "Read past beginning of medium") 478SENSE_CODE(0x3B0B, "Position past end of medium") 479SENSE_CODE(0x3B0C, "Position past beginning of medium") 480SENSE_CODE(0x3B0D, "Medium destination element full") 481SENSE_CODE(0x3B0E, "Medium source element empty") 482SENSE_CODE(0x3B0F, "End of medium reached") 483SENSE_CODE(0x3B11, "Medium magazine not accessible") 484SENSE_CODE(0x3B12, "Medium magazine removed") 485SENSE_CODE(0x3B13, "Medium magazine inserted") 486SENSE_CODE(0x3B14, "Medium magazine locked") 487SENSE_CODE(0x3B15, "Medium magazine unlocked") 488SENSE_CODE(0x3B16, "Mechanical positioning or changer error") 489SENSE_CODE(0x3B17, "Read past end of user object") 490SENSE_CODE(0x3B18, "Element disabled") 491SENSE_CODE(0x3B19, "Element enabled") 492SENSE_CODE(0x3B1A, "Data transfer device removed") 493SENSE_CODE(0x3B1B, "Data transfer device inserted") 494SENSE_CODE(0x3B1C, "Too many logical objects on partition to support operation") 495SENSE_CODE(0x3B20, "Element static information changed") 496 497SENSE_CODE(0x3D00, "Invalid bits in identify message") 498 499SENSE_CODE(0x3E00, "Logical unit has not self-configured yet") 500SENSE_CODE(0x3E01, "Logical unit failure") 501SENSE_CODE(0x3E02, "Timeout on logical unit") 502SENSE_CODE(0x3E03, "Logical unit failed self-test") 503SENSE_CODE(0x3E04, "Logical unit unable to update self-test log") 504 505SENSE_CODE(0x3F00, "Target operating conditions have changed") 506SENSE_CODE(0x3F01, "Microcode has been changed") 507SENSE_CODE(0x3F02, "Changed operating definition") 508SENSE_CODE(0x3F03, "Inquiry data has changed") 509SENSE_CODE(0x3F04, "Component device attached") 510SENSE_CODE(0x3F05, "Device identifier changed") 511SENSE_CODE(0x3F06, "Redundancy group created or modified") 512SENSE_CODE(0x3F07, "Redundancy group deleted") 513SENSE_CODE(0x3F08, "Spare created or modified") 514SENSE_CODE(0x3F09, "Spare deleted") 515SENSE_CODE(0x3F0A, "Volume set created or modified") 516SENSE_CODE(0x3F0B, "Volume set deleted") 517SENSE_CODE(0x3F0C, "Volume set deassigned") 518SENSE_CODE(0x3F0D, "Volume set reassigned") 519SENSE_CODE(0x3F0E, "Reported luns data has changed") 520SENSE_CODE(0x3F0F, "Echo buffer overwritten") 521SENSE_CODE(0x3F10, "Medium loadable") 522SENSE_CODE(0x3F11, "Medium auxiliary memory accessible") 523SENSE_CODE(0x3F12, "iSCSI IP address added") 524SENSE_CODE(0x3F13, "iSCSI IP address removed") 525SENSE_CODE(0x3F14, "iSCSI IP address changed") 526SENSE_CODE(0x3F15, "Inspect referrals sense descriptors") 527SENSE_CODE(0x3F16, "Microcode has been changed without reset") 528SENSE_CODE(0x3F17, "Zone transition to full") 529SENSE_CODE(0x3F18, "Bind completed") 530SENSE_CODE(0x3F19, "Bind redirected") 531SENSE_CODE(0x3F1A, "Subsidiary binding changed") 532 533/* 534 * SENSE_CODE(0x40NN, "Ram failure") 535 * SENSE_CODE(0x40NN, "Diagnostic failure on component nn") 536 * SENSE_CODE(0x41NN, "Data path failure") 537 * SENSE_CODE(0x42NN, "Power-on or self-test failure") 538 */ 539SENSE_CODE(0x4300, "Message error") 540 541SENSE_CODE(0x4400, "Internal target failure") 542SENSE_CODE(0x4401, "Persistent reservation information lost") 543SENSE_CODE(0x4471, "ATA device failed set features") 544 545SENSE_CODE(0x4500, "Select or reselect failure") 546 547SENSE_CODE(0x4600, "Unsuccessful soft reset") 548 549SENSE_CODE(0x4700, "Scsi parity error") 550SENSE_CODE(0x4701, "Data phase CRC error detected") 551SENSE_CODE(0x4702, "Scsi parity error detected during st data phase") 552SENSE_CODE(0x4703, "Information unit iuCRC error detected") 553SENSE_CODE(0x4704, "Asynchronous information protection error detected") 554SENSE_CODE(0x4705, "Protocol service CRC error") 555SENSE_CODE(0x4706, "Phy test function in progress") 556SENSE_CODE(0x477f, "Some commands cleared by iSCSI Protocol event") 557 558SENSE_CODE(0x4800, "Initiator detected error message received") 559 560SENSE_CODE(0x4900, "Invalid message error") 561 562SENSE_CODE(0x4A00, "Command phase error") 563 564SENSE_CODE(0x4B00, "Data phase error") 565SENSE_CODE(0x4B01, "Invalid target port transfer tag received") 566SENSE_CODE(0x4B02, "Too much write data") 567SENSE_CODE(0x4B03, "Ack/nak timeout") 568SENSE_CODE(0x4B04, "Nak received") 569SENSE_CODE(0x4B05, "Data offset error") 570SENSE_CODE(0x4B06, "Initiator response timeout") 571SENSE_CODE(0x4B07, "Connection lost") 572SENSE_CODE(0x4B08, "Data-in buffer overflow - data buffer size") 573SENSE_CODE(0x4B09, "Data-in buffer overflow - data buffer descriptor area") 574SENSE_CODE(0x4B0A, "Data-in buffer error") 575SENSE_CODE(0x4B0B, "Data-out buffer overflow - data buffer size") 576SENSE_CODE(0x4B0C, "Data-out buffer overflow - data buffer descriptor area") 577SENSE_CODE(0x4B0D, "Data-out buffer error") 578SENSE_CODE(0x4B0E, "PCIe fabric error") 579SENSE_CODE(0x4B0F, "PCIe completion timeout") 580SENSE_CODE(0x4B10, "PCIe completer abort") 581SENSE_CODE(0x4B11, "PCIe poisoned tlp received") 582SENSE_CODE(0x4B12, "PCIe eCRC check failed") 583SENSE_CODE(0x4B13, "PCIe unsupported request") 584SENSE_CODE(0x4B14, "PCIe acs violation") 585SENSE_CODE(0x4B15, "PCIe tlp prefix blocked") 586 587SENSE_CODE(0x4C00, "Logical unit failed self-configuration") 588/* 589 * SENSE_CODE(0x4DNN, "Tagged overlapped commands (nn = queue tag)") 590 */ 591SENSE_CODE(0x4E00, "Overlapped commands attempted") 592 593SENSE_CODE(0x5000, "Write append error") 594SENSE_CODE(0x5001, "Write append position error") 595SENSE_CODE(0x5002, "Position error related to timing") 596 597SENSE_CODE(0x5100, "Erase failure") 598SENSE_CODE(0x5101, "Erase failure - incomplete erase operation detected") 599 600SENSE_CODE(0x5200, "Cartridge fault") 601 602SENSE_CODE(0x5300, "Media load or eject failed") 603SENSE_CODE(0x5301, "Unload tape failure") 604SENSE_CODE(0x5302, "Medium removal prevented") 605SENSE_CODE(0x5303, "Medium removal prevented by data transfer element") 606SENSE_CODE(0x5304, "Medium thread or unthread failure") 607SENSE_CODE(0x5305, "Volume identifier invalid") 608SENSE_CODE(0x5306, "Volume identifier missing") 609SENSE_CODE(0x5307, "Duplicate volume identifier") 610SENSE_CODE(0x5308, "Element status unknown") 611SENSE_CODE(0x5309, "Data transfer device error - load failed") 612SENSE_CODE(0x530a, "Data transfer device error - unload failed") 613SENSE_CODE(0x530b, "Data transfer device error - unload missing") 614SENSE_CODE(0x530c, "Data transfer device error - eject failed") 615SENSE_CODE(0x530d, "Data transfer device error - library communication failed") 616 617SENSE_CODE(0x5400, "Scsi to host system interface failure") 618 619SENSE_CODE(0x5500, "System resource failure") 620SENSE_CODE(0x5501, "System buffer full") 621SENSE_CODE(0x5502, "Insufficient reservation resources") 622SENSE_CODE(0x5503, "Insufficient resources") 623SENSE_CODE(0x5504, "Insufficient registration resources") 624SENSE_CODE(0x5505, "Insufficient access control resources") 625SENSE_CODE(0x5506, "Auxiliary memory out of space") 626SENSE_CODE(0x5507, "Quota error") 627SENSE_CODE(0x5508, "Maximum number of supplemental decryption keys exceeded") 628SENSE_CODE(0x5509, "Medium auxiliary memory not accessible") 629SENSE_CODE(0x550A, "Data currently unavailable") 630SENSE_CODE(0x550B, "Insufficient power for operation") 631SENSE_CODE(0x550C, "Insufficient resources to create rod") 632SENSE_CODE(0x550D, "Insufficient resources to create rod token") 633SENSE_CODE(0x550E, "Insufficient zone resources") 634SENSE_CODE(0x550F, "Insufficient zone resources to complete write") 635SENSE_CODE(0x5510, "Maximum number of streams open") 636SENSE_CODE(0x5511, "Insufficient resources to bind") 637 638SENSE_CODE(0x5700, "Unable to recover table-of-contents") 639 640SENSE_CODE(0x5800, "Generation does not exist") 641 642SENSE_CODE(0x5900, "Updated block read") 643 644SENSE_CODE(0x5A00, "Operator request or state change input") 645SENSE_CODE(0x5A01, "Operator medium removal request") 646SENSE_CODE(0x5A02, "Operator selected write protect") 647SENSE_CODE(0x5A03, "Operator selected write permit") 648 649SENSE_CODE(0x5B00, "Log exception") 650SENSE_CODE(0x5B01, "Threshold condition met") 651SENSE_CODE(0x5B02, "Log counter at maximum") 652SENSE_CODE(0x5B03, "Log list codes exhausted") 653 654SENSE_CODE(0x5C00, "Rpl status change") 655SENSE_CODE(0x5C01, "Spindles synchronized") 656SENSE_CODE(0x5C02, "Spindles not synchronized") 657 658SENSE_CODE(0x5D00, "Failure prediction threshold exceeded") 659SENSE_CODE(0x5D01, "Media failure prediction threshold exceeded") 660SENSE_CODE(0x5D02, "Logical unit failure prediction threshold exceeded") 661SENSE_CODE(0x5D03, "Spare area exhaustion prediction threshold exceeded") 662SENSE_CODE(0x5D10, "Hardware impending failure general hard drive failure") 663SENSE_CODE(0x5D11, "Hardware impending failure drive error rate too high") 664SENSE_CODE(0x5D12, "Hardware impending failure data error rate too high") 665SENSE_CODE(0x5D13, "Hardware impending failure seek error rate too high") 666SENSE_CODE(0x5D14, "Hardware impending failure too many block reassigns") 667SENSE_CODE(0x5D15, "Hardware impending failure access times too high") 668SENSE_CODE(0x5D16, "Hardware impending failure start unit times too high") 669SENSE_CODE(0x5D17, "Hardware impending failure channel parametrics") 670SENSE_CODE(0x5D18, "Hardware impending failure controller detected") 671SENSE_CODE(0x5D19, "Hardware impending failure throughput performance") 672SENSE_CODE(0x5D1A, "Hardware impending failure seek time performance") 673SENSE_CODE(0x5D1B, "Hardware impending failure spin-up retry count") 674SENSE_CODE(0x5D1C, "Hardware impending failure drive calibration retry count") 675SENSE_CODE(0x5D20, "Controller impending failure general hard drive failure") 676SENSE_CODE(0x5D21, "Controller impending failure drive error rate too high") 677SENSE_CODE(0x5D22, "Controller impending failure data error rate too high") 678SENSE_CODE(0x5D23, "Controller impending failure seek error rate too high") 679SENSE_CODE(0x5D24, "Controller impending failure too many block reassigns") 680SENSE_CODE(0x5D25, "Controller impending failure access times too high") 681SENSE_CODE(0x5D26, "Controller impending failure start unit times too high") 682SENSE_CODE(0x5D27, "Controller impending failure channel parametrics") 683SENSE_CODE(0x5D28, "Controller impending failure controller detected") 684SENSE_CODE(0x5D29, "Controller impending failure throughput performance") 685SENSE_CODE(0x5D2A, "Controller impending failure seek time performance") 686SENSE_CODE(0x5D2B, "Controller impending failure spin-up retry count") 687SENSE_CODE(0x5D2C, "Controller impending failure drive calibration retry count") 688SENSE_CODE(0x5D30, "Data channel impending failure general hard drive failure") 689SENSE_CODE(0x5D31, "Data channel impending failure drive error rate too high") 690SENSE_CODE(0x5D32, "Data channel impending failure data error rate too high") 691SENSE_CODE(0x5D33, "Data channel impending failure seek error rate too high") 692SENSE_CODE(0x5D34, "Data channel impending failure too many block reassigns") 693SENSE_CODE(0x5D35, "Data channel impending failure access times too high") 694SENSE_CODE(0x5D36, "Data channel impending failure start unit times too high") 695SENSE_CODE(0x5D37, "Data channel impending failure channel parametrics") 696SENSE_CODE(0x5D38, "Data channel impending failure controller detected") 697SENSE_CODE(0x5D39, "Data channel impending failure throughput performance") 698SENSE_CODE(0x5D3A, "Data channel impending failure seek time performance") 699SENSE_CODE(0x5D3B, "Data channel impending failure spin-up retry count") 700SENSE_CODE(0x5D3C, "Data channel impending failure drive calibration retry count") 701SENSE_CODE(0x5D40, "Servo impending failure general hard drive failure") 702SENSE_CODE(0x5D41, "Servo impending failure drive error rate too high") 703SENSE_CODE(0x5D42, "Servo impending failure data error rate too high") 704SENSE_CODE(0x5D43, "Servo impending failure seek error rate too high") 705SENSE_CODE(0x5D44, "Servo impending failure too many block reassigns") 706SENSE_CODE(0x5D45, "Servo impending failure access times too high") 707SENSE_CODE(0x5D46, "Servo impending failure start unit times too high") 708SENSE_CODE(0x5D47, "Servo impending failure channel parametrics") 709SENSE_CODE(0x5D48, "Servo impending failure controller detected") 710SENSE_CODE(0x5D49, "Servo impending failure throughput performance") 711SENSE_CODE(0x5D4A, "Servo impending failure seek time performance") 712SENSE_CODE(0x5D4B, "Servo impending failure spin-up retry count") 713SENSE_CODE(0x5D4C, "Servo impending failure drive calibration retry count") 714SENSE_CODE(0x5D50, "Spindle impending failure general hard drive failure") 715SENSE_CODE(0x5D51, "Spindle impending failure drive error rate too high") 716SENSE_CODE(0x5D52, "Spindle impending failure data error rate too high") 717SENSE_CODE(0x5D53, "Spindle impending failure seek error rate too high") 718SENSE_CODE(0x5D54, "Spindle impending failure too many block reassigns") 719SENSE_CODE(0x5D55, "Spindle impending failure access times too high") 720SENSE_CODE(0x5D56, "Spindle impending failure start unit times too high") 721SENSE_CODE(0x5D57, "Spindle impending failure channel parametrics") 722SENSE_CODE(0x5D58, "Spindle impending failure controller detected") 723SENSE_CODE(0x5D59, "Spindle impending failure throughput performance") 724SENSE_CODE(0x5D5A, "Spindle impending failure seek time performance") 725SENSE_CODE(0x5D5B, "Spindle impending failure spin-up retry count") 726SENSE_CODE(0x5D5C, "Spindle impending failure drive calibration retry count") 727SENSE_CODE(0x5D60, "Firmware impending failure general hard drive failure") 728SENSE_CODE(0x5D61, "Firmware impending failure drive error rate too high") 729SENSE_CODE(0x5D62, "Firmware impending failure data error rate too high") 730SENSE_CODE(0x5D63, "Firmware impending failure seek error rate too high") 731SENSE_CODE(0x5D64, "Firmware impending failure too many block reassigns") 732SENSE_CODE(0x5D65, "Firmware impending failure access times too high") 733SENSE_CODE(0x5D66, "Firmware impending failure start unit times too high") 734SENSE_CODE(0x5D67, "Firmware impending failure channel parametrics") 735SENSE_CODE(0x5D68, "Firmware impending failure controller detected") 736SENSE_CODE(0x5D69, "Firmware impending failure throughput performance") 737SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance") 738SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count") 739SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count") 740SENSE_CODE(0x5D73, "Media impending failure endurance limit met") 741SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)") 742 743SENSE_CODE(0x5E00, "Low power condition on") 744SENSE_CODE(0x5E01, "Idle condition activated by timer") 745SENSE_CODE(0x5E02, "Standby condition activated by timer") 746SENSE_CODE(0x5E03, "Idle condition activated by command") 747SENSE_CODE(0x5E04, "Standby condition activated by command") 748SENSE_CODE(0x5E05, "Idle_b condition activated by timer") 749SENSE_CODE(0x5E06, "Idle_b condition activated by command") 750SENSE_CODE(0x5E07, "Idle_c condition activated by timer") 751SENSE_CODE(0x5E08, "Idle_c condition activated by command") 752SENSE_CODE(0x5E09, "Standby_y condition activated by timer") 753SENSE_CODE(0x5E0A, "Standby_y condition activated by command") 754SENSE_CODE(0x5E41, "Power state change to active") 755SENSE_CODE(0x5E42, "Power state change to idle") 756SENSE_CODE(0x5E43, "Power state change to standby") 757SENSE_CODE(0x5E45, "Power state change to sleep") 758SENSE_CODE(0x5E47, "Power state change to device control") 759 760SENSE_CODE(0x6000, "Lamp failure") 761 762SENSE_CODE(0x6100, "Video acquisition error") 763SENSE_CODE(0x6101, "Unable to acquire video") 764SENSE_CODE(0x6102, "Out of focus") 765 766SENSE_CODE(0x6200, "Scan head positioning error") 767 768SENSE_CODE(0x6300, "End of user area encountered on this track") 769SENSE_CODE(0x6301, "Packet does not fit in available space") 770 771SENSE_CODE(0x6400, "Illegal mode for this track") 772SENSE_CODE(0x6401, "Invalid packet size") 773 774SENSE_CODE(0x6500, "Voltage fault") 775 776SENSE_CODE(0x6600, "Automatic document feeder cover up") 777SENSE_CODE(0x6601, "Automatic document feeder lift up") 778SENSE_CODE(0x6602, "Document jam in automatic document feeder") 779SENSE_CODE(0x6603, "Document miss feed automatic in document feeder") 780 781SENSE_CODE(0x6700, "Configuration failure") 782SENSE_CODE(0x6701, "Configuration of incapable logical units failed") 783SENSE_CODE(0x6702, "Add logical unit failed") 784SENSE_CODE(0x6703, "Modification of logical unit failed") 785SENSE_CODE(0x6704, "Exchange of logical unit failed") 786SENSE_CODE(0x6705, "Remove of logical unit failed") 787SENSE_CODE(0x6706, "Attachment of logical unit failed") 788SENSE_CODE(0x6707, "Creation of logical unit failed") 789SENSE_CODE(0x6708, "Assign failure occurred") 790SENSE_CODE(0x6709, "Multiply assigned logical unit") 791SENSE_CODE(0x670A, "Set target port groups command failed") 792SENSE_CODE(0x670B, "ATA device feature not enabled") 793SENSE_CODE(0x670C, "Command rejected") 794SENSE_CODE(0x670D, "Explicit bind not allowed") 795 796SENSE_CODE(0x6800, "Logical unit not configured") 797SENSE_CODE(0x6801, "Subsidiary logical unit not configured") 798 799SENSE_CODE(0x6900, "Data loss on logical unit") 800SENSE_CODE(0x6901, "Multiple logical unit failures") 801SENSE_CODE(0x6902, "Parity/data mismatch") 802 803SENSE_CODE(0x6A00, "Informational, refer to log") 804 805SENSE_CODE(0x6B00, "State change has occurred") 806SENSE_CODE(0x6B01, "Redundancy level got better") 807SENSE_CODE(0x6B02, "Redundancy level got worse") 808 809SENSE_CODE(0x6C00, "Rebuild failure occurred") 810 811SENSE_CODE(0x6D00, "Recalculate failure occurred") 812 813SENSE_CODE(0x6E00, "Command to logical unit failed") 814 815SENSE_CODE(0x6F00, "Copy protection key exchange failure - authentication failure") 816SENSE_CODE(0x6F01, "Copy protection key exchange failure - key not present") 817SENSE_CODE(0x6F02, "Copy protection key exchange failure - key not established") 818SENSE_CODE(0x6F03, "Read of scrambled sector without authentication") 819SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region") 820SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error") 821SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording") 822SENSE_CODE(0x6F07, "Conflict in binding nonce recording") 823SENSE_CODE(0x6F08, "Insufficient permission") 824SENSE_CODE(0x6F09, "Invalid drive-host pairing server") 825SENSE_CODE(0x6F0A, "Drive-host pairing suspended") 826 827/* 828 * SENSE_CODE(0x70NN, "Decompression exception short algorithm id of nn") 829 */ 830SENSE_CODE(0x7100, "Decompression exception long algorithm id") 831 832SENSE_CODE(0x7200, "Session fixation error") 833SENSE_CODE(0x7201, "Session fixation error writing lead-in") 834SENSE_CODE(0x7202, "Session fixation error writing lead-out") 835SENSE_CODE(0x7203, "Session fixation error - incomplete track in session") 836SENSE_CODE(0x7204, "Empty or partially written reserved track") 837SENSE_CODE(0x7205, "No more track reservations allowed") 838SENSE_CODE(0x7206, "RMZ extension is not allowed") 839SENSE_CODE(0x7207, "No more test zone extensions are allowed") 840 841SENSE_CODE(0x7300, "Cd control error") 842SENSE_CODE(0x7301, "Power calibration area almost full") 843SENSE_CODE(0x7302, "Power calibration area is full") 844SENSE_CODE(0x7303, "Power calibration area error") 845SENSE_CODE(0x7304, "Program memory area update failure") 846SENSE_CODE(0x7305, "Program memory area is full") 847SENSE_CODE(0x7306, "RMA/PMA is almost full") 848SENSE_CODE(0x7310, "Current power calibration area almost full") 849SENSE_CODE(0x7311, "Current power calibration area is full") 850SENSE_CODE(0x7317, "RDZ is full") 851 852SENSE_CODE(0x7400, "Security error") 853SENSE_CODE(0x7401, "Unable to decrypt data") 854SENSE_CODE(0x7402, "Unencrypted data encountered while decrypting") 855SENSE_CODE(0x7403, "Incorrect data encryption key") 856SENSE_CODE(0x7404, "Cryptographic integrity validation failed") 857SENSE_CODE(0x7405, "Error decrypting data") 858SENSE_CODE(0x7406, "Unknown signature verification key") 859SENSE_CODE(0x7407, "Encryption parameters not useable") 860SENSE_CODE(0x7408, "Digital signature validation failure") 861SENSE_CODE(0x7409, "Encryption mode mismatch on read") 862SENSE_CODE(0x740A, "Encrypted block not raw read enabled") 863SENSE_CODE(0x740B, "Incorrect Encryption parameters") 864SENSE_CODE(0x740C, "Unable to decrypt parameter list") 865SENSE_CODE(0x740D, "Encryption algorithm disabled") 866SENSE_CODE(0x7410, "SA creation parameter value invalid") 867SENSE_CODE(0x7411, "SA creation parameter value rejected") 868SENSE_CODE(0x7412, "Invalid SA usage") 869SENSE_CODE(0x7421, "Data Encryption configuration prevented") 870SENSE_CODE(0x7430, "SA creation parameter not supported") 871SENSE_CODE(0x7440, "Authentication failed") 872SENSE_CODE(0x7461, "External data encryption key manager access error") 873SENSE_CODE(0x7462, "External data encryption key manager error") 874SENSE_CODE(0x7463, "External data encryption key not found") 875SENSE_CODE(0x7464, "External data encryption request not authorized") 876SENSE_CODE(0x746E, "External data encryption control timeout") 877SENSE_CODE(0x746F, "External data encryption control error") 878SENSE_CODE(0x7471, "Logical unit access not authorized") 879SENSE_CODE(0x7479, "Security conflict in translated device")