regulators-tegra30.c (13047B)
1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Voltage regulators coupler for NVIDIA Tegra30 4 * Copyright (C) 2019 GRATE-DRIVER project 5 * 6 * Voltage constraints borrowed from downstream kernel sources 7 * Copyright (C) 2010-2011 NVIDIA Corporation 8 */ 9 10#define pr_fmt(fmt) "tegra voltage-coupler: " fmt 11 12#include <linux/init.h> 13#include <linux/kernel.h> 14#include <linux/of.h> 15#include <linux/reboot.h> 16#include <linux/regulator/coupler.h> 17#include <linux/regulator/driver.h> 18#include <linux/regulator/machine.h> 19#include <linux/suspend.h> 20 21#include <soc/tegra/fuse.h> 22#include <soc/tegra/pmc.h> 23 24struct tegra_regulator_coupler { 25 struct regulator_coupler coupler; 26 struct regulator_dev *core_rdev; 27 struct regulator_dev *cpu_rdev; 28 struct notifier_block reboot_notifier; 29 struct notifier_block suspend_notifier; 30 int core_min_uV, cpu_min_uV; 31 bool sys_reboot_mode_req; 32 bool sys_reboot_mode; 33 bool sys_suspend_mode_req; 34 bool sys_suspend_mode; 35}; 36 37static inline struct tegra_regulator_coupler * 38to_tegra_coupler(struct regulator_coupler *coupler) 39{ 40 return container_of(coupler, struct tegra_regulator_coupler, coupler); 41} 42 43static int tegra30_core_limit(struct tegra_regulator_coupler *tegra, 44 struct regulator_dev *core_rdev) 45{ 46 int core_min_uV = 0; 47 int core_max_uV; 48 int core_cur_uV; 49 int err; 50 51 /* 52 * Tegra30 SoC has critical DVFS-capable devices that are 53 * permanently-active or active at a boot time, like EMC 54 * (DRAM controller) or Display controller for example. 55 * 56 * The voltage of a CORE SoC power domain shall not be dropped below 57 * a minimum level, which is determined by device's clock rate. 58 * This means that we can't fully allow CORE voltage scaling until 59 * the state of all DVFS-critical CORE devices is synced. 60 */ 61 if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) { 62 pr_info_once("voltage state synced\n"); 63 return 0; 64 } 65 66 if (tegra->core_min_uV > 0) 67 return tegra->core_min_uV; 68 69 core_cur_uV = regulator_get_voltage_rdev(core_rdev); 70 if (core_cur_uV < 0) 71 return core_cur_uV; 72 73 core_max_uV = max(core_cur_uV, 1200000); 74 75 err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); 76 if (err) 77 return err; 78 79 /* 80 * Limit minimum CORE voltage to a value left from bootloader or, 81 * if it's unreasonably low value, to the most common 1.2v or to 82 * whatever maximum value defined via board's device-tree. 83 */ 84 tegra->core_min_uV = core_max_uV; 85 86 pr_info("core voltage initialized to %duV\n", tegra->core_min_uV); 87 88 return tegra->core_min_uV; 89} 90 91static int tegra30_core_cpu_limit(int cpu_uV) 92{ 93 if (cpu_uV < 800000) 94 return 950000; 95 96 if (cpu_uV < 900000) 97 return 1000000; 98 99 if (cpu_uV < 1000000) 100 return 1100000; 101 102 if (cpu_uV < 1100000) 103 return 1200000; 104 105 if (cpu_uV < 1250000) { 106 switch (tegra_sku_info.cpu_speedo_id) { 107 case 0 ... 1: 108 case 4: 109 case 7 ... 8: 110 return 1200000; 111 112 default: 113 return 1300000; 114 } 115 } 116 117 return -EINVAL; 118} 119 120static int tegra30_cpu_nominal_uV(void) 121{ 122 switch (tegra_sku_info.cpu_speedo_id) { 123 case 10 ... 11: 124 return 850000; 125 126 case 9: 127 return 912000; 128 129 case 1 ... 3: 130 case 7 ... 8: 131 return 1050000; 132 133 default: 134 return 1125000; 135 136 case 4 ... 6: 137 case 12 ... 13: 138 return 1237000; 139 } 140} 141 142static int tegra30_core_nominal_uV(void) 143{ 144 switch (tegra_sku_info.soc_speedo_id) { 145 case 0: 146 return 1200000; 147 148 case 1: 149 if (tegra_sku_info.cpu_speedo_id != 7 && 150 tegra_sku_info.cpu_speedo_id != 8) 151 return 1200000; 152 153 fallthrough; 154 155 case 2: 156 if (tegra_sku_info.cpu_speedo_id != 13) 157 return 1300000; 158 159 return 1350000; 160 161 default: 162 return 1250000; 163 } 164} 165 166static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra, 167 struct regulator_dev *cpu_rdev, 168 struct regulator_dev *core_rdev) 169{ 170 int core_min_uV, core_max_uV = INT_MAX; 171 int cpu_min_uV, cpu_max_uV = INT_MAX; 172 int cpu_min_uV_consumers = 0; 173 int core_min_limited_uV; 174 int core_target_uV; 175 int cpu_target_uV; 176 int core_max_step; 177 int cpu_max_step; 178 int max_spread; 179 int core_uV; 180 int cpu_uV; 181 int err; 182 183 /* 184 * CPU voltage should not got lower than 300mV from the CORE. 185 * CPU voltage should stay below the CORE by 100mV+, depending 186 * by the CORE voltage. This applies to all Tegra30 SoC's. 187 */ 188 max_spread = cpu_rdev->constraints->max_spread[0]; 189 cpu_max_step = cpu_rdev->constraints->max_uV_step; 190 core_max_step = core_rdev->constraints->max_uV_step; 191 192 if (!max_spread) { 193 pr_err_once("cpu-core max-spread is undefined in device-tree\n"); 194 max_spread = 300000; 195 } 196 197 if (!cpu_max_step) { 198 pr_err_once("cpu max-step is undefined in device-tree\n"); 199 cpu_max_step = 150000; 200 } 201 202 if (!core_max_step) { 203 pr_err_once("core max-step is undefined in device-tree\n"); 204 core_max_step = 150000; 205 } 206 207 /* 208 * The CORE voltage scaling is currently not hooked up in drivers, 209 * hence we will limit the minimum CORE voltage to a reasonable value. 210 * This should be good enough for the time being. 211 */ 212 core_min_uV = tegra30_core_limit(tegra, core_rdev); 213 if (core_min_uV < 0) 214 return core_min_uV; 215 216 err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV, 217 PM_SUSPEND_ON); 218 if (err) 219 return err; 220 221 /* prepare voltage level for suspend */ 222 if (tegra->sys_suspend_mode) 223 core_min_uV = clamp(tegra30_core_nominal_uV(), 224 core_min_uV, core_max_uV); 225 226 core_uV = regulator_get_voltage_rdev(core_rdev); 227 if (core_uV < 0) 228 return core_uV; 229 230 cpu_min_uV = core_min_uV - max_spread; 231 232 err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV, 233 PM_SUSPEND_ON); 234 if (err) 235 return err; 236 237 err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers, 238 &cpu_max_uV, PM_SUSPEND_ON); 239 if (err) 240 return err; 241 242 err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV); 243 if (err) 244 return err; 245 246 cpu_uV = regulator_get_voltage_rdev(cpu_rdev); 247 if (cpu_uV < 0) 248 return cpu_uV; 249 250 /* store boot voltage level */ 251 if (!tegra->cpu_min_uV) 252 tegra->cpu_min_uV = cpu_uV; 253 254 /* 255 * CPU's regulator may not have any consumers, hence the voltage 256 * must not be changed in that case because CPU simply won't 257 * survive the voltage drop if it's running on a higher frequency. 258 */ 259 if (!cpu_min_uV_consumers) 260 cpu_min_uV = max(cpu_uV, cpu_min_uV); 261 262 /* 263 * Bootloader shall set up voltages correctly, but if it 264 * happens that there is a violation, then try to fix it 265 * at first. 266 */ 267 core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV); 268 if (core_min_limited_uV < 0) 269 return core_min_limited_uV; 270 271 core_min_uV = max(core_min_uV, tegra30_core_cpu_limit(cpu_min_uV)); 272 273 err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); 274 if (err) 275 return err; 276 277 /* restore boot voltage level */ 278 if (tegra->sys_reboot_mode) 279 cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV); 280 281 /* prepare voltage level for suspend */ 282 if (tegra->sys_suspend_mode) 283 cpu_min_uV = clamp(tegra30_cpu_nominal_uV(), 284 cpu_min_uV, cpu_max_uV); 285 286 if (core_min_limited_uV > core_uV) { 287 pr_err("core voltage constraint violated: %d %d %d\n", 288 core_uV, core_min_limited_uV, cpu_uV); 289 goto update_core; 290 } 291 292 while (cpu_uV != cpu_min_uV || core_uV != core_min_uV) { 293 if (cpu_uV < cpu_min_uV) { 294 cpu_target_uV = min(cpu_uV + cpu_max_step, cpu_min_uV); 295 } else { 296 cpu_target_uV = max(cpu_uV - cpu_max_step, cpu_min_uV); 297 cpu_target_uV = max(core_uV - max_spread, cpu_target_uV); 298 } 299 300 if (cpu_uV == cpu_target_uV) 301 goto update_core; 302 303 err = regulator_set_voltage_rdev(cpu_rdev, 304 cpu_target_uV, 305 cpu_max_uV, 306 PM_SUSPEND_ON); 307 if (err) 308 return err; 309 310 cpu_uV = cpu_target_uV; 311update_core: 312 core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV); 313 if (core_min_limited_uV < 0) 314 return core_min_limited_uV; 315 316 core_target_uV = max(core_min_limited_uV, core_min_uV); 317 318 if (core_uV < core_target_uV) { 319 core_target_uV = min(core_target_uV, core_uV + core_max_step); 320 core_target_uV = min(core_target_uV, cpu_uV + max_spread); 321 } else { 322 core_target_uV = max(core_target_uV, core_uV - core_max_step); 323 } 324 325 if (core_uV == core_target_uV) 326 continue; 327 328 err = regulator_set_voltage_rdev(core_rdev, 329 core_target_uV, 330 core_max_uV, 331 PM_SUSPEND_ON); 332 if (err) 333 return err; 334 335 core_uV = core_target_uV; 336 } 337 338 return 0; 339} 340 341static int tegra30_regulator_balance_voltage(struct regulator_coupler *coupler, 342 struct regulator_dev *rdev, 343 suspend_state_t state) 344{ 345 struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); 346 struct regulator_dev *core_rdev = tegra->core_rdev; 347 struct regulator_dev *cpu_rdev = tegra->cpu_rdev; 348 349 if ((core_rdev != rdev && cpu_rdev != rdev) || state != PM_SUSPEND_ON) { 350 pr_err("regulators are not coupled properly\n"); 351 return -EINVAL; 352 } 353 354 tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req); 355 tegra->sys_suspend_mode = READ_ONCE(tegra->sys_suspend_mode_req); 356 357 return tegra30_voltage_update(tegra, cpu_rdev, core_rdev); 358} 359 360static int tegra30_regulator_prepare_suspend(struct tegra_regulator_coupler *tegra, 361 bool sys_suspend_mode) 362{ 363 int err; 364 365 if (!tegra->core_rdev || !tegra->cpu_rdev) 366 return 0; 367 368 /* 369 * All power domains are enabled early during resume from suspend 370 * by GENPD core. Domains like VENC may require a higher voltage 371 * when enabled during resume from suspend. This also prepares 372 * hardware for resuming from LP0. 373 */ 374 375 WRITE_ONCE(tegra->sys_suspend_mode_req, sys_suspend_mode); 376 377 err = regulator_sync_voltage_rdev(tegra->cpu_rdev); 378 if (err) 379 return err; 380 381 err = regulator_sync_voltage_rdev(tegra->core_rdev); 382 if (err) 383 return err; 384 385 return 0; 386} 387 388static int tegra30_regulator_suspend(struct notifier_block *notifier, 389 unsigned long mode, void *arg) 390{ 391 struct tegra_regulator_coupler *tegra; 392 int ret = 0; 393 394 tegra = container_of(notifier, struct tegra_regulator_coupler, 395 suspend_notifier); 396 397 switch (mode) { 398 case PM_HIBERNATION_PREPARE: 399 case PM_RESTORE_PREPARE: 400 case PM_SUSPEND_PREPARE: 401 ret = tegra30_regulator_prepare_suspend(tegra, true); 402 break; 403 404 case PM_POST_HIBERNATION: 405 case PM_POST_RESTORE: 406 case PM_POST_SUSPEND: 407 ret = tegra30_regulator_prepare_suspend(tegra, false); 408 break; 409 } 410 411 if (ret) 412 pr_err("failed to prepare regulators: %d\n", ret); 413 414 return notifier_from_errno(ret); 415} 416 417static int tegra30_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra, 418 bool sys_reboot_mode) 419{ 420 int err; 421 422 if (!tegra->core_rdev || !tegra->cpu_rdev) 423 return 0; 424 425 WRITE_ONCE(tegra->sys_reboot_mode_req, true); 426 427 /* 428 * Some devices use CPU soft-reboot method and in this case we 429 * should ensure that voltages are sane for the reboot by restoring 430 * the minimum boot levels. 431 */ 432 err = regulator_sync_voltage_rdev(tegra->cpu_rdev); 433 if (err) 434 return err; 435 436 err = regulator_sync_voltage_rdev(tegra->core_rdev); 437 if (err) 438 return err; 439 440 WRITE_ONCE(tegra->sys_reboot_mode_req, sys_reboot_mode); 441 442 return 0; 443} 444 445static int tegra30_regulator_reboot(struct notifier_block *notifier, 446 unsigned long event, void *cmd) 447{ 448 struct tegra_regulator_coupler *tegra; 449 int ret; 450 451 if (event != SYS_RESTART) 452 return NOTIFY_DONE; 453 454 tegra = container_of(notifier, struct tegra_regulator_coupler, 455 reboot_notifier); 456 457 ret = tegra30_regulator_prepare_reboot(tegra, true); 458 459 return notifier_from_errno(ret); 460} 461 462static int tegra30_regulator_attach(struct regulator_coupler *coupler, 463 struct regulator_dev *rdev) 464{ 465 struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); 466 struct device_node *np = rdev->dev.of_node; 467 468 if (of_property_read_bool(np, "nvidia,tegra-core-regulator") && 469 !tegra->core_rdev) { 470 tegra->core_rdev = rdev; 471 return 0; 472 } 473 474 if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") && 475 !tegra->cpu_rdev) { 476 tegra->cpu_rdev = rdev; 477 return 0; 478 } 479 480 return -EINVAL; 481} 482 483static int tegra30_regulator_detach(struct regulator_coupler *coupler, 484 struct regulator_dev *rdev) 485{ 486 struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); 487 488 /* 489 * We don't expect regulators to be decoupled during reboot, 490 * this may race with the reboot handler and shouldn't ever 491 * happen in practice. 492 */ 493 if (WARN_ON_ONCE(system_state > SYSTEM_RUNNING)) 494 return -EPERM; 495 496 if (tegra->core_rdev == rdev) { 497 tegra->core_rdev = NULL; 498 return 0; 499 } 500 501 if (tegra->cpu_rdev == rdev) { 502 tegra->cpu_rdev = NULL; 503 return 0; 504 } 505 506 return -EINVAL; 507} 508 509static struct tegra_regulator_coupler tegra30_coupler = { 510 .coupler = { 511 .attach_regulator = tegra30_regulator_attach, 512 .detach_regulator = tegra30_regulator_detach, 513 .balance_voltage = tegra30_regulator_balance_voltage, 514 }, 515 .reboot_notifier.notifier_call = tegra30_regulator_reboot, 516 .suspend_notifier.notifier_call = tegra30_regulator_suspend, 517}; 518 519static int __init tegra_regulator_coupler_init(void) 520{ 521 int err; 522 523 if (!of_machine_is_compatible("nvidia,tegra30")) 524 return 0; 525 526 err = register_reboot_notifier(&tegra30_coupler.reboot_notifier); 527 WARN_ON(err); 528 529 err = register_pm_notifier(&tegra30_coupler.suspend_notifier); 530 WARN_ON(err); 531 532 return regulator_coupler_register(&tegra30_coupler.coupler); 533} 534arch_initcall(tegra_regulator_coupler_init);