sysfs-bus-iio-dds (3761B)
1 2What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY 3KernelVersion: 2.6.37 4Contact: linux-iio@vger.kernel.org 5Description: 6 Stores frequency into tuning word Y. 7 There will be more than one out_altvoltageX_frequencyY file, 8 which allows for pin controlled FSK Frequency Shift Keying 9 (out_altvoltageX_pincontrol_frequency_en is active) or the user 10 can control the desired active tuning word by writing Y to the 11 out_altvoltageX_frequencysymbol file. 12 13What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale 14KernelVersion: 2.6.37 15Contact: linux-iio@vger.kernel.org 16Description: 17 Scale to be applied to out_altvoltageX_frequencyY in order to 18 obtain the desired value in Hz. If shared across all frequency 19 registers Y is not present. It is also possible X is not present 20 if shared across all channels. 21 22What: /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol 23KernelVersion: 2.6.37 24Contact: linux-iio@vger.kernel.org 25Description: 26 Specifies the active output frequency tuning word. The value 27 corresponds to the Y in out_altvoltageX_frequencyY. 28 To exit this mode the user can write 29 out_altvoltageX_pincontrol_frequency_en or 30 out_altvoltageX_out_enable file. 31 32What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY 33KernelVersion: 2.6.37 34Contact: linux-iio@vger.kernel.org 35Description: 36 Stores phase into Y. 37 There will be more than one out_altvoltageX_phaseY file, which 38 allows for pin controlled PSK Phase Shift Keying 39 (out_altvoltageX_pincontrol_phase_en is active) or the user can 40 control the desired phase Y which is added to the phase 41 accumulator output by writing Y to the phase_en file. 42 43What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale 44KernelVersion: 2.6.37 45Contact: linux-iio@vger.kernel.org 46Description: 47 Scale to be applied to out_altvoltageX_phaseY in order to obtain 48 the desired value in rad. If shared across all phase registers 49 Y is not present. It is also possible X is not present if 50 shared across all channels. 51 52What: /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol 53KernelVersion: 2.6.37 54Contact: linux-iio@vger.kernel.org 55Description: 56 Specifies the active phase Y which is added to the phase 57 accumulator output. The value corresponds to the Y in 58 out_altvoltageX_phaseY. To exit this mode the user can write 59 out_altvoltageX_pincontrol_phase_en or disable file. 60 61What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en 62What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en 63What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en 64KernelVersion: 2.6.37 65Contact: linux-iio@vger.kernel.org 66Description: 67 out_altvoltageX_pincontrol_en: Both, the active frequency and 68 phase is controlled by the respective phase and frequency 69 control inputs. In case the device in features independent 70 controls, then there are dedicated files 71 (out_altvoltageX_pincontrol_frequency_en, 72 out_altvoltageX_pincontrol_phase_en). 73 74What: /sys/bus/iio/devices/.../out_altvoltageX_out_enable 75What: /sys/bus/iio/devices/.../out_altvoltageX_outY_enable 76KernelVersion: 2.6.37 77Contact: linux-iio@vger.kernel.org 78Description: 79 out_altvoltageX_outY_enable controls signal generation on 80 output Y of channel X. Y may be suppressed if all channels are 81 controlled together. 82 83What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype 84KernelVersion: 2.6.37 85Contact: linux-iio@vger.kernel.org 86Description: 87 Specifies the output waveform. 88 (sine, triangle, ramp, square, ...) 89 For a list of available output waveform options read 90 available_output_modes. 91 92What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available 93KernelVersion: 2.6.37 94Contact: linux-iio@vger.kernel.org 95Description: 96 Lists all available output waveform options.