sh-sci.h (7613B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2#include <linux/bitops.h> 3#include <linux/serial_core.h> 4#include <linux/io.h> 5 6#define SCI_MAJOR 204 7#define SCI_MINOR_START 8 8 9 10/* 11 * SCI register subset common for all port types. 12 * Not all registers will exist on all parts. 13 */ 14enum { 15 SCSMR, /* Serial Mode Register */ 16 SCBRR, /* Bit Rate Register */ 17 SCSCR, /* Serial Control Register */ 18 SCxSR, /* Serial Status Register */ 19 SCFCR, /* FIFO Control Register */ 20 SCFDR, /* FIFO Data Count Register */ 21 SCxTDR, /* Transmit (FIFO) Data Register */ 22 SCxRDR, /* Receive (FIFO) Data Register */ 23 SCLSR, /* Line Status Register */ 24 SCTFDR, /* Transmit FIFO Data Count Register */ 25 SCRFDR, /* Receive FIFO Data Count Register */ 26 SCSPTR, /* Serial Port Register */ 27 HSSRR, /* Sampling Rate Register */ 28 SCPCR, /* Serial Port Control Register */ 29 SCPDR, /* Serial Port Data Register */ 30 SCDL, /* BRG Frequency Division Register */ 31 SCCKS, /* BRG Clock Select Register */ 32 HSRTRGR, /* Rx FIFO Data Count Trigger Register */ 33 HSTTRGR, /* Tx FIFO Data Count Trigger Register */ 34 SEMR, /* Serial extended mode register */ 35 36 SCIx_NR_REGS, 37}; 38 39 40/* SCSMR (Serial Mode Register) */ 41#define SCSMR_C_A BIT(7) /* Communication Mode */ 42#define SCSMR_CSYNC BIT(7) /* - Clocked synchronous mode */ 43#define SCSMR_ASYNC 0 /* - Asynchronous mode */ 44#define SCSMR_CHR BIT(6) /* 7-bit Character Length */ 45#define SCSMR_PE BIT(5) /* Parity Enable */ 46#define SCSMR_ODD BIT(4) /* Odd Parity */ 47#define SCSMR_STOP BIT(3) /* Stop Bit Length */ 48#define SCSMR_CKS 0x0003 /* Clock Select */ 49 50/* Serial Mode Register, SCIFA/SCIFB only bits */ 51#define SCSMR_CKEDG BIT(12) /* Transmit/Receive Clock Edge Select */ 52#define SCSMR_SRC_MASK 0x0700 /* Sampling Control */ 53#define SCSMR_SRC_16 0x0000 /* Sampling rate 1/16 */ 54#define SCSMR_SRC_5 0x0100 /* Sampling rate 1/5 */ 55#define SCSMR_SRC_7 0x0200 /* Sampling rate 1/7 */ 56#define SCSMR_SRC_11 0x0300 /* Sampling rate 1/11 */ 57#define SCSMR_SRC_13 0x0400 /* Sampling rate 1/13 */ 58#define SCSMR_SRC_17 0x0500 /* Sampling rate 1/17 */ 59#define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */ 60#define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */ 61 62/* Serial Control Register, SCIFA/SCIFB only bits */ 63#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ 64#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ 65 66/* Serial Control Register, HSCIF-only bits */ 67#define HSSCR_TOT_SHIFT 14 68 69/* SCxSR (Serial Status Register) on SCI */ 70#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ 71#define SCI_RDRF BIT(6) /* Receive Data Register Full */ 72#define SCI_ORER BIT(5) /* Overrun Error */ 73#define SCI_FER BIT(4) /* Framing Error */ 74#define SCI_PER BIT(3) /* Parity Error */ 75#define SCI_TEND BIT(2) /* Transmit End */ 76#define SCI_RESERVED 0x03 /* All reserved bits */ 77 78#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) 79 80#define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF)) 81#define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) 82#define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE)) 83#define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) 84 85/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ 86#define SCIF_ER BIT(7) /* Receive Error */ 87#define SCIF_TEND BIT(6) /* Transmission End */ 88#define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ 89#define SCIF_BRK BIT(4) /* Break Detect */ 90#define SCIF_FER BIT(3) /* Framing Error */ 91#define SCIF_PER BIT(2) /* Parity Error */ 92#define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ 93#define SCIF_DR BIT(0) /* Receive Data Ready */ 94/* SCIF only (optional) */ 95#define SCIF_PERC 0xf000 /* Number of Parity Errors */ 96#define SCIF_FERC 0x0f00 /* Number of Framing Errors */ 97/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */ 98#define SCIFA_ORER BIT(9) /* Overrun Error */ 99 100#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) 101 102#define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF)) 103#define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER)) 104#define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE)) 105#define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK)) 106 107/* SCFCR (FIFO Control Register) */ 108#define SCFCR_RTRG1 BIT(7) /* Receive FIFO Data Count Trigger */ 109#define SCFCR_RTRG0 BIT(6) 110#define SCFCR_TTRG1 BIT(5) /* Transmit FIFO Data Count Trigger */ 111#define SCFCR_TTRG0 BIT(4) 112#define SCFCR_MCE BIT(3) /* Modem Control Enable */ 113#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ 114#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ 115#define SCFCR_LOOP BIT(0) /* Loopback Test */ 116 117/* SCLSR (Line Status Register) on (H)SCIF */ 118#define SCLSR_TO BIT(2) /* Timeout */ 119#define SCLSR_ORER BIT(0) /* Overrun Error */ 120 121/* SCSPTR (Serial Port Register), optional */ 122#define SCSPTR_RTSIO BIT(7) /* Serial Port RTS# Pin Input/Output */ 123#define SCSPTR_RTSDT BIT(6) /* Serial Port RTS# Pin Data */ 124#define SCSPTR_CTSIO BIT(5) /* Serial Port CTS# Pin Input/Output */ 125#define SCSPTR_CTSDT BIT(4) /* Serial Port CTS# Pin Data */ 126#define SCSPTR_SCKIO BIT(3) /* Serial Port Clock Pin Input/Output */ 127#define SCSPTR_SCKDT BIT(2) /* Serial Port Clock Pin Data */ 128#define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ 129#define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ 130 131/* HSSRR HSCIF */ 132#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ 133#define HSCIF_SRDE BIT(14) /* Sampling Point Register Enable */ 134 135#define HSCIF_SRHP_SHIFT 8 136#define HSCIF_SRHP_MASK 0x0f00 137 138/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ 139#define SCPCR_RTSC BIT(4) /* Serial Port RTS# Pin / Output Pin */ 140#define SCPCR_CTSC BIT(3) /* Serial Port CTS# Pin / Input Pin */ 141#define SCPCR_SCKC BIT(2) /* Serial Port SCK Pin / Output Pin */ 142#define SCPCR_RXDC BIT(1) /* Serial Port RXD Pin / Input Pin */ 143#define SCPCR_TXDC BIT(0) /* Serial Port TXD Pin / Output Pin */ 144 145/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ 146#define SCPDR_RTSD BIT(4) /* Serial Port RTS# Output Pin Data */ 147#define SCPDR_CTSD BIT(3) /* Serial Port CTS# Input Pin Data */ 148#define SCPDR_SCKD BIT(2) /* Serial Port SCK Output Pin Data */ 149#define SCPDR_RXDD BIT(1) /* Serial Port RXD Input Pin Data */ 150#define SCPDR_TXDD BIT(0) /* Serial Port TXD Output Pin Data */ 151 152/* 153 * BRG Clock Select Register (Some SCIF and HSCIF) 154 * The Baud Rate Generator for external clock can provide a clock source for 155 * the sampling clock. It outputs either its frequency divided clock, or the 156 * (undivided) (H)SCK external clock. 157 */ 158#define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ 159#define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ 160 161#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) 162#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_DR | SCIF_RDF) 163#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) 164#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) 165#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) 166#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) 167 168#define SCxSR_ERRORS(port) (to_sci_port(port)->params->error_mask) 169 170#define SCxSR_RDxF_CLEAR(port) \ 171 (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) 172#define SCxSR_ERROR_CLEAR(port) \ 173 (to_sci_port(port)->params->error_clear) 174#define SCxSR_TDxE_CLEAR(port) \ 175 (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) 176#define SCxSR_BREAK_CLEAR(port) \ 177 (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)