cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

uio_pdrv_genirq.c (8235B)


      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * drivers/uio/uio_pdrv_genirq.c
      4 *
      5 * Userspace I/O platform driver with generic IRQ handling code.
      6 *
      7 * Copyright (C) 2008 Magnus Damm
      8 *
      9 * Based on uio_pdrv.c by Uwe Kleine-Koenig,
     10 * Copyright (C) 2008 by Digi International Inc.
     11 * All rights reserved.
     12 */
     13
     14#include <linux/platform_device.h>
     15#include <linux/uio_driver.h>
     16#include <linux/spinlock.h>
     17#include <linux/bitops.h>
     18#include <linux/module.h>
     19#include <linux/interrupt.h>
     20#include <linux/stringify.h>
     21#include <linux/pm_runtime.h>
     22#include <linux/slab.h>
     23#include <linux/irq.h>
     24
     25#include <linux/of.h>
     26#include <linux/of_platform.h>
     27#include <linux/of_address.h>
     28
     29#define DRIVER_NAME "uio_pdrv_genirq"
     30
     31struct uio_pdrv_genirq_platdata {
     32	struct uio_info *uioinfo;
     33	spinlock_t lock;
     34	unsigned long flags;
     35	struct platform_device *pdev;
     36};
     37
     38/* Bits in uio_pdrv_genirq_platdata.flags */
     39enum {
     40	UIO_IRQ_DISABLED = 0,
     41};
     42
     43static int uio_pdrv_genirq_open(struct uio_info *info, struct inode *inode)
     44{
     45	struct uio_pdrv_genirq_platdata *priv = info->priv;
     46
     47	/* Wait until the Runtime PM code has woken up the device */
     48	pm_runtime_get_sync(&priv->pdev->dev);
     49	return 0;
     50}
     51
     52static int uio_pdrv_genirq_release(struct uio_info *info, struct inode *inode)
     53{
     54	struct uio_pdrv_genirq_platdata *priv = info->priv;
     55
     56	/* Tell the Runtime PM code that the device has become idle */
     57	pm_runtime_put_sync(&priv->pdev->dev);
     58	return 0;
     59}
     60
     61static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
     62{
     63	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
     64
     65	/* Just disable the interrupt in the interrupt controller, and
     66	 * remember the state so we can allow user space to enable it later.
     67	 */
     68
     69	spin_lock(&priv->lock);
     70	if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
     71		disable_irq_nosync(irq);
     72	spin_unlock(&priv->lock);
     73
     74	return IRQ_HANDLED;
     75}
     76
     77static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
     78{
     79	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
     80	unsigned long flags;
     81
     82	/* Allow user space to enable and disable the interrupt
     83	 * in the interrupt controller, but keep track of the
     84	 * state to prevent per-irq depth damage.
     85	 *
     86	 * Serialize this operation to support multiple tasks and concurrency
     87	 * with irq handler on SMP systems.
     88	 */
     89
     90	spin_lock_irqsave(&priv->lock, flags);
     91	if (irq_on) {
     92		if (__test_and_clear_bit(UIO_IRQ_DISABLED, &priv->flags))
     93			enable_irq(dev_info->irq);
     94	} else {
     95		if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
     96			disable_irq_nosync(dev_info->irq);
     97	}
     98	spin_unlock_irqrestore(&priv->lock, flags);
     99
    100	return 0;
    101}
    102
    103static void uio_pdrv_genirq_cleanup(void *data)
    104{
    105	struct device *dev = data;
    106
    107	pm_runtime_disable(dev);
    108}
    109
    110static int uio_pdrv_genirq_probe(struct platform_device *pdev)
    111{
    112	struct uio_info *uioinfo = dev_get_platdata(&pdev->dev);
    113	struct device_node *node = pdev->dev.of_node;
    114	struct uio_pdrv_genirq_platdata *priv;
    115	struct uio_mem *uiomem;
    116	int ret = -EINVAL;
    117	int i;
    118
    119	if (node) {
    120		const char *name;
    121
    122		/* alloc uioinfo for one device */
    123		uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo),
    124				       GFP_KERNEL);
    125		if (!uioinfo) {
    126			dev_err(&pdev->dev, "unable to kmalloc\n");
    127			return -ENOMEM;
    128		}
    129
    130		if (!of_property_read_string(node, "linux,uio-name", &name))
    131			uioinfo->name = devm_kstrdup(&pdev->dev, name, GFP_KERNEL);
    132		else
    133			uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
    134						       "%pOFn", node);
    135
    136		uioinfo->version = "devicetree";
    137		/* Multiple IRQs are not supported */
    138	}
    139
    140	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
    141		dev_err(&pdev->dev, "missing platform_data\n");
    142		return ret;
    143	}
    144
    145	if (uioinfo->handler || uioinfo->irqcontrol ||
    146	    uioinfo->irq_flags & IRQF_SHARED) {
    147		dev_err(&pdev->dev, "interrupt configuration error\n");
    148		return ret;
    149	}
    150
    151	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
    152	if (!priv) {
    153		dev_err(&pdev->dev, "unable to kmalloc\n");
    154		return -ENOMEM;
    155	}
    156
    157	priv->uioinfo = uioinfo;
    158	spin_lock_init(&priv->lock);
    159	priv->flags = 0; /* interrupt is enabled to begin with */
    160	priv->pdev = pdev;
    161
    162	if (!uioinfo->irq) {
    163		ret = platform_get_irq_optional(pdev, 0);
    164		uioinfo->irq = ret;
    165		if (ret == -ENXIO)
    166			uioinfo->irq = UIO_IRQ_NONE;
    167		else if (ret == -EPROBE_DEFER)
    168			return ret;
    169		else if (ret < 0) {
    170			dev_err(&pdev->dev, "failed to get IRQ\n");
    171			return ret;
    172		}
    173	}
    174
    175	if (uioinfo->irq) {
    176		struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
    177
    178		/*
    179		 * If a level interrupt, dont do lazy disable. Otherwise the
    180		 * irq will fire again since clearing of the actual cause, on
    181		 * device level, is done in userspace
    182		 * irqd_is_level_type() isn't used since isn't valid until
    183		 * irq is configured.
    184		 */
    185		if (irq_data &&
    186		    irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
    187			dev_dbg(&pdev->dev, "disable lazy unmask\n");
    188			irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
    189		}
    190	}
    191
    192	uiomem = &uioinfo->mem[0];
    193
    194	for (i = 0; i < pdev->num_resources; ++i) {
    195		struct resource *r = &pdev->resource[i];
    196
    197		if (r->flags != IORESOURCE_MEM)
    198			continue;
    199
    200		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
    201			dev_warn(&pdev->dev, "device has more than "
    202					__stringify(MAX_UIO_MAPS)
    203					" I/O memory resources.\n");
    204			break;
    205		}
    206
    207		uiomem->memtype = UIO_MEM_PHYS;
    208		uiomem->addr = r->start & PAGE_MASK;
    209		uiomem->offs = r->start & ~PAGE_MASK;
    210		uiomem->size = (uiomem->offs + resource_size(r)
    211				+ PAGE_SIZE - 1) & PAGE_MASK;
    212		uiomem->name = r->name;
    213		++uiomem;
    214	}
    215
    216	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
    217		uiomem->size = 0;
    218		++uiomem;
    219	}
    220
    221	/* This driver requires no hardware specific kernel code to handle
    222	 * interrupts. Instead, the interrupt handler simply disables the
    223	 * interrupt in the interrupt controller. User space is responsible
    224	 * for performing hardware specific acknowledge and re-enabling of
    225	 * the interrupt in the interrupt controller.
    226	 *
    227	 * Interrupt sharing is not supported.
    228	 */
    229
    230	uioinfo->handler = uio_pdrv_genirq_handler;
    231	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
    232	uioinfo->open = uio_pdrv_genirq_open;
    233	uioinfo->release = uio_pdrv_genirq_release;
    234	uioinfo->priv = priv;
    235
    236	/* Enable Runtime PM for this device:
    237	 * The device starts in suspended state to allow the hardware to be
    238	 * turned off by default. The Runtime PM bus code should power on the
    239	 * hardware and enable clocks at open().
    240	 */
    241	pm_runtime_enable(&pdev->dev);
    242
    243	ret = devm_add_action_or_reset(&pdev->dev, uio_pdrv_genirq_cleanup,
    244				       &pdev->dev);
    245	if (ret)
    246		return ret;
    247
    248	ret = devm_uio_register_device(&pdev->dev, priv->uioinfo);
    249	if (ret)
    250		dev_err(&pdev->dev, "unable to register uio device\n");
    251
    252	return ret;
    253}
    254
    255static int uio_pdrv_genirq_runtime_nop(struct device *dev)
    256{
    257	/* Runtime PM callback shared between ->runtime_suspend()
    258	 * and ->runtime_resume(). Simply returns success.
    259	 *
    260	 * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
    261	 * are used at open() and release() time. This allows the
    262	 * Runtime PM code to turn off power to the device while the
    263	 * device is unused, ie before open() and after release().
    264	 *
    265	 * This Runtime PM callback does not need to save or restore
    266	 * any registers since user space is responsbile for hardware
    267	 * register reinitialization after open().
    268	 */
    269	return 0;
    270}
    271
    272static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
    273	.runtime_suspend = uio_pdrv_genirq_runtime_nop,
    274	.runtime_resume = uio_pdrv_genirq_runtime_nop,
    275};
    276
    277#ifdef CONFIG_OF
    278static struct of_device_id uio_of_genirq_match[] = {
    279	{ /* This is filled with module_parm */ },
    280	{ /* Sentinel */ },
    281};
    282MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
    283module_param_string(of_id, uio_of_genirq_match[0].compatible, 128, 0);
    284MODULE_PARM_DESC(of_id, "Openfirmware id of the device to be handled by uio");
    285#endif
    286
    287static struct platform_driver uio_pdrv_genirq = {
    288	.probe = uio_pdrv_genirq_probe,
    289	.driver = {
    290		.name = DRIVER_NAME,
    291		.pm = &uio_pdrv_genirq_dev_pm_ops,
    292		.of_match_table = of_match_ptr(uio_of_genirq_match),
    293	},
    294};
    295
    296module_platform_driver(uio_pdrv_genirq);
    297
    298MODULE_AUTHOR("Magnus Damm");
    299MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
    300MODULE_LICENSE("GPL v2");
    301MODULE_ALIAS("platform:" DRIVER_NAME);