Kconfig (18652B)
1# SPDX-License-Identifier: GPL-2.0 2# 3# USB Gadget support on a system involves 4# (a) a peripheral controller, and 5# (b) the gadget driver using it. 6# 7# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! 8# 9# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). 10# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). 11# - Some systems have both kinds of controllers. 12# 13# With help from a special transceiver and a "Mini-AB" jack, systems with 14# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). 15# 16# A Linux "Gadget Driver" talks to the USB Peripheral Controller 17# driver through the abstract "gadget" API. Some other operating 18# systems call these "client" drivers, of which "class drivers" 19# are a subset (implementing a USB device class specification). 20# A gadget driver implements one or more USB functions using 21# the peripheral hardware. 22# 23# Gadget drivers are hardware-neutral, or "platform independent", 24# except that they sometimes must understand quirks or limitations 25# of the particular controllers they work with. For example, when 26# a controller doesn't support alternate configurations or provide 27# enough of the right types of endpoints, the gadget driver might 28# not be able work with that controller, or might need to implement 29# a less common variant of a device class protocol. 30# 31# The available choices each represent a single precomposed USB 32# gadget configuration. In the device model, each option contains 33# both the device instantiation as a child for a USB gadget 34# controller, and the relevant drivers for each function declared 35# by the device. 36 37menu "USB Gadget precomposed configurations" 38 39config USB_ZERO 40 tristate "Gadget Zero (DEVELOPMENT)" 41 select USB_LIBCOMPOSITE 42 select USB_F_SS_LB 43 help 44 Gadget Zero is a two-configuration device. It either sinks and 45 sources bulk data; or it loops back a configurable number of 46 transfers. It also implements control requests, for "chapter 9" 47 conformance. The driver needs only two bulk-capable endpoints, so 48 it can work on top of most device-side usb controllers. It's 49 useful for testing, and is also a working example showing how 50 USB "gadget drivers" can be written. 51 52 Make this be the first driver you try using on top of any new 53 USB peripheral controller driver. Then you can use host-side 54 test software, like the "usbtest" driver, to put your hardware 55 and its driver through a basic set of functional tests. 56 57 Gadget Zero also works with the host-side "usb-skeleton" driver, 58 and with many kinds of host-side test software. You may need 59 to tweak product and vendor IDs before host software knows about 60 this device, and arrange to select an appropriate configuration. 61 62 Say "y" to link the driver statically, or "m" to build a 63 dynamically linked module called "g_zero". 64 65config USB_ZERO_HNPTEST 66 bool "HNP Test Device" 67 depends on USB_ZERO && USB_OTG 68 help 69 You can configure this device to enumerate using the device 70 identifiers of the USB-OTG test device. That means that when 71 this gadget connects to another OTG device, with this one using 72 the "B-Peripheral" role, that device will use HNP to let this 73 one serve as the USB host instead (in the "B-Host" role). 74 75config USB_AUDIO 76 tristate "Audio Gadget" 77 depends on SND 78 select USB_LIBCOMPOSITE 79 select SND_PCM 80 select USB_F_UAC1 if (GADGET_UAC1 && !GADGET_UAC1_LEGACY) 81 select USB_F_UAC1_LEGACY if (GADGET_UAC1 && GADGET_UAC1_LEGACY) 82 select USB_F_UAC2 if !GADGET_UAC1 83 select USB_U_AUDIO if (USB_F_UAC2 || USB_F_UAC1) 84 help 85 This Gadget Audio driver is compatible with USB Audio Class 86 specification 2.0. It implements 1 AudioControl interface, 87 1 AudioStreaming Interface each for USB-OUT and USB-IN. 88 Number of channels, sample rate and sample size can be 89 specified as module parameters. 90 This driver doesn't expect any real Audio codec to be present 91 on the device - the audio streams are simply sinked to and 92 sourced from a virtual ALSA sound card created. The user-space 93 application may choose to do whatever it wants with the data 94 received from the USB Host and choose to provide whatever it 95 wants as audio data to the USB Host. 96 97 Say "y" to link the driver statically, or "m" to build a 98 dynamically linked module called "g_audio". 99 100config GADGET_UAC1 101 bool "UAC 1.0" 102 depends on USB_AUDIO 103 help 104 If you instead want older USB Audio Class specification 1.0 support 105 with similar driver capabilities. 106 107config GADGET_UAC1_LEGACY 108 bool "UAC 1.0 (Legacy)" 109 depends on GADGET_UAC1 110 help 111 If you instead want legacy UAC Spec-1.0 driver that also has audio 112 paths hardwired to the Audio codec chip on-board and doesn't work 113 without one. 114 115config USB_ETH 116 tristate "Ethernet Gadget (with CDC Ethernet support)" 117 depends on NET 118 select USB_LIBCOMPOSITE 119 select USB_U_ETHER 120 select USB_F_ECM 121 select USB_F_SUBSET 122 select CRC32 123 help 124 This driver implements Ethernet style communication, in one of 125 several ways: 126 127 - The "Communication Device Class" (CDC) Ethernet Control Model. 128 That protocol is often avoided with pure Ethernet adapters, in 129 favor of simpler vendor-specific hardware, but is widely 130 supported by firmware for smart network devices. 131 132 - On hardware can't implement that protocol, a simple CDC subset 133 is used, placing fewer demands on USB. 134 135 - CDC Ethernet Emulation Model (EEM) is a newer standard that has 136 a simpler interface that can be used by more USB hardware. 137 138 RNDIS support is an additional option, more demanding than subset. 139 140 Within the USB device, this gadget driver exposes a network device 141 "usbX", where X depends on what other networking devices you have. 142 Treat it like a two-node Ethernet link: host, and gadget. 143 144 The Linux-USB host-side "usbnet" driver interoperates with this 145 driver, so that deep I/O queues can be supported. On 2.4 kernels, 146 use "CDCEther" instead, if you're using the CDC option. That CDC 147 mode should also interoperate with standard CDC Ethernet class 148 drivers on other host operating systems. 149 150 Say "y" to link the driver statically, or "m" to build a 151 dynamically linked module called "g_ether". 152 153config USB_ETH_RNDIS 154 bool "RNDIS support" 155 depends on USB_ETH 156 select USB_LIBCOMPOSITE 157 select USB_F_RNDIS 158 default y 159 help 160 Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, 161 and Microsoft provides redistributable binary RNDIS drivers for 162 older versions of Windows. 163 164 If you say "y" here, the Ethernet gadget driver will try to provide 165 a second device configuration, supporting RNDIS to talk to such 166 Microsoft USB hosts. 167 168 To make MS-Windows work with this, use Documentation/usb/linux.inf 169 as the "driver info file". For versions of MS-Windows older than 170 XP, you'll need to download drivers from Microsoft's website; a URL 171 is given in comments found in that info file. 172 173config USB_ETH_EEM 174 bool "Ethernet Emulation Model (EEM) support" 175 depends on USB_ETH 176 select USB_LIBCOMPOSITE 177 select USB_F_EEM 178 help 179 CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM 180 and therefore can be supported by more hardware. Technically ECM and 181 EEM are designed for different applications. The ECM model extends 182 the network interface to the target (e.g. a USB cable modem), and the 183 EEM model is for mobile devices to communicate with hosts using 184 ethernet over USB. For Linux gadgets, however, the interface with 185 the host is the same (a usbX device), so the differences are minimal. 186 187 If you say "y" here, the Ethernet gadget driver will use the EEM 188 protocol rather than ECM. If unsure, say "n". 189 190config USB_G_NCM 191 tristate "Network Control Model (NCM) support" 192 depends on NET 193 select USB_LIBCOMPOSITE 194 select USB_U_ETHER 195 select USB_F_NCM 196 select CRC32 197 help 198 This driver implements USB CDC NCM subclass standard. NCM is 199 an advanced protocol for Ethernet encapsulation, allows grouping 200 of several ethernet frames into one USB transfer and different 201 alignment possibilities. 202 203 Say "y" to link the driver statically, or "m" to build a 204 dynamically linked module called "g_ncm". 205 206config USB_GADGETFS 207 tristate "Gadget Filesystem" 208 help 209 This driver provides a filesystem based API that lets user mode 210 programs implement a single-configuration USB device, including 211 endpoint I/O and control requests that don't relate to enumeration. 212 All endpoints, transfer speeds, and transfer types supported by 213 the hardware are available, through read() and write() calls. 214 215 Say "y" to link the driver statically, or "m" to build a 216 dynamically linked module called "gadgetfs". 217 218config USB_FUNCTIONFS 219 tristate "Function Filesystem" 220 select USB_LIBCOMPOSITE 221 select USB_F_FS 222 select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) 223 help 224 The Function Filesystem (FunctionFS) lets one create USB 225 composite functions in user space in the same way GadgetFS 226 lets one create USB gadgets in user space. This allows creation 227 of composite gadgets such that some of the functions are 228 implemented in kernel space (for instance Ethernet, serial or 229 mass storage) and other are implemented in user space. 230 231 If you say "y" or "m" here you will be able what kind of 232 configurations the gadget will provide. 233 234 Say "y" to link the driver statically, or "m" to build 235 a dynamically linked module called "g_ffs". 236 237config USB_FUNCTIONFS_ETH 238 bool "Include configuration with CDC ECM (Ethernet)" 239 depends on USB_FUNCTIONFS && NET 240 select USB_U_ETHER 241 select USB_F_ECM 242 select USB_F_SUBSET 243 help 244 Include a configuration with CDC ECM function (Ethernet) and the 245 Function Filesystem. 246 247config USB_FUNCTIONFS_RNDIS 248 bool "Include configuration with RNDIS (Ethernet)" 249 depends on USB_FUNCTIONFS && NET 250 select USB_U_ETHER 251 select USB_F_RNDIS 252 help 253 Include a configuration with RNDIS function (Ethernet) and the Filesystem. 254 255config USB_FUNCTIONFS_GENERIC 256 bool "Include 'pure' configuration" 257 depends on USB_FUNCTIONFS 258 help 259 Include a configuration with the Function Filesystem alone with 260 no Ethernet interface. 261 262config USB_MASS_STORAGE 263 tristate "Mass Storage Gadget" 264 depends on BLOCK 265 select USB_LIBCOMPOSITE 266 select USB_F_MASS_STORAGE 267 help 268 The Mass Storage Gadget acts as a USB Mass Storage disk drive. 269 As its storage repository it can use a regular file or a block 270 device (in much the same way as the "loop" device driver), 271 specified as a module parameter or sysfs option. 272 273 This driver is a replacement for now removed File-backed 274 Storage Gadget (g_file_storage). 275 276 Say "y" to link the driver statically, or "m" to build 277 a dynamically linked module called "g_mass_storage". 278 279config USB_GADGET_TARGET 280 tristate "USB Gadget Target Fabric Module" 281 depends on TARGET_CORE 282 select USB_LIBCOMPOSITE 283 select USB_F_TCM 284 help 285 This fabric is an USB gadget. Two USB protocols are supported that is 286 BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is 287 advertised on alternative interface 0 (primary) and UAS is on 288 alternative interface 1. Both protocols can work on USB2.0 and USB3.0. 289 UAS utilizes the USB 3.0 feature called streams support. 290 291config USB_G_SERIAL 292 tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" 293 depends on TTY 294 select USB_U_SERIAL 295 select USB_F_ACM 296 select USB_F_SERIAL 297 select USB_F_OBEX 298 select USB_LIBCOMPOSITE 299 help 300 The Serial Gadget talks to the Linux-USB generic serial driver. 301 This driver supports a CDC-ACM module option, which can be used 302 to interoperate with MS-Windows hosts or with the Linux-USB 303 "cdc-acm" driver. 304 305 This driver also supports a CDC-OBEX option. You will need a 306 user space OBEX server talking to /dev/ttyGS*, since the kernel 307 itself doesn't implement the OBEX protocol. 308 309 Say "y" to link the driver statically, or "m" to build a 310 dynamically linked module called "g_serial". 311 312 For more information, see Documentation/usb/gadget_serial.rst 313 which includes instructions and a "driver info file" needed to 314 make MS-Windows work with CDC ACM. 315 316config USB_MIDI_GADGET 317 tristate "MIDI Gadget" 318 depends on SND 319 select USB_LIBCOMPOSITE 320 select SND_RAWMIDI 321 select USB_F_MIDI 322 help 323 The MIDI Gadget acts as a USB Audio device, with one MIDI 324 input and one MIDI output. These MIDI jacks appear as 325 a sound "card" in the ALSA sound system. Other MIDI 326 connections can then be made on the gadget system, using 327 ALSA's aconnect utility etc. 328 329 Say "y" to link the driver statically, or "m" to build a 330 dynamically linked module called "g_midi". 331 332config USB_G_PRINTER 333 tristate "Printer Gadget" 334 select USB_LIBCOMPOSITE 335 select USB_F_PRINTER 336 help 337 The Printer Gadget channels data between the USB host and a 338 userspace program driving the print engine. The user space 339 program reads and writes the device file /dev/g_printer to 340 receive or send printer data. It can use ioctl calls to 341 the device file to get or set printer status. 342 343 Say "y" to link the driver statically, or "m" to build a 344 dynamically linked module called "g_printer". 345 346 For more information, see Documentation/usb/gadget_printer.rst 347 which includes sample code for accessing the device file. 348 349if TTY 350 351config USB_CDC_COMPOSITE 352 tristate "CDC Composite Device (Ethernet and ACM)" 353 depends on NET 354 select USB_LIBCOMPOSITE 355 select USB_U_SERIAL 356 select USB_U_ETHER 357 select USB_F_ACM 358 select USB_F_ECM 359 help 360 This driver provides two functions in one configuration: 361 a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. 362 363 This driver requires four bulk and two interrupt endpoints, 364 plus the ability to handle altsettings. Not all peripheral 365 controllers are that capable. 366 367 Say "y" to link the driver statically, or "m" to build a 368 dynamically linked module. 369 370config USB_G_NOKIA 371 tristate "Nokia composite gadget" 372 depends on PHONET 373 depends on BLOCK 374 select USB_LIBCOMPOSITE 375 select USB_U_SERIAL 376 select USB_U_ETHER 377 select USB_F_ACM 378 select USB_F_OBEX 379 select USB_F_PHONET 380 select USB_F_ECM 381 select USB_F_MASS_STORAGE 382 help 383 The Nokia composite gadget provides support for acm, obex 384 and phonet in only one composite gadget driver. 385 386 It's only really useful for N900 hardware. If you're building 387 a kernel for N900, say Y or M here. If unsure, say N. 388 389config USB_G_ACM_MS 390 tristate "CDC Composite Device (ACM and mass storage)" 391 depends on BLOCK 392 select USB_LIBCOMPOSITE 393 select USB_U_SERIAL 394 select USB_F_ACM 395 select USB_F_MASS_STORAGE 396 help 397 This driver provides two functions in one configuration: 398 a mass storage, and a CDC ACM (serial port) link. 399 400 Say "y" to link the driver statically, or "m" to build a 401 dynamically linked module called "g_acm_ms". 402 403config USB_G_MULTI 404 tristate "Multifunction Composite Gadget" 405 depends on BLOCK && NET 406 select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS 407 select USB_LIBCOMPOSITE 408 select USB_U_SERIAL 409 select USB_U_ETHER 410 select USB_F_ACM 411 select USB_F_MASS_STORAGE 412 help 413 The Multifunction Composite Gadget provides Ethernet (RNDIS 414 and/or CDC Ethernet), mass storage and ACM serial link 415 interfaces. 416 417 You will be asked to choose which of the two configurations is 418 to be available in the gadget. At least one configuration must 419 be chosen to make the gadget usable. Selecting more than one 420 configuration will prevent Windows from automatically detecting 421 the gadget as a composite gadget, so an INF file will be needed to 422 use the gadget. 423 424 Say "y" to link the driver statically, or "m" to build a 425 dynamically linked module called "g_multi". 426 427config USB_G_MULTI_RNDIS 428 bool "RNDIS + CDC Serial + Storage configuration" 429 depends on USB_G_MULTI 430 select USB_F_RNDIS 431 default y 432 help 433 This option enables a configuration with RNDIS, CDC Serial and 434 Mass Storage functions available in the Multifunction Composite 435 Gadget. This is the configuration dedicated for Windows since RNDIS 436 is Microsoft's protocol. 437 438 If unsure, say "y". 439 440config USB_G_MULTI_CDC 441 bool "CDC Ethernet + CDC Serial + Storage configuration" 442 depends on USB_G_MULTI 443 select USB_F_ECM 444 help 445 This option enables a configuration with CDC Ethernet (ECM), CDC 446 Serial and Mass Storage functions available in the Multifunction 447 Composite Gadget. 448 449 If unsure, say "y". 450 451endif # TTY 452 453config USB_G_HID 454 tristate "HID Gadget" 455 select USB_LIBCOMPOSITE 456 select USB_F_HID 457 help 458 The HID gadget driver provides generic emulation of USB 459 Human Interface Devices (HID). 460 461 For more information, see Documentation/usb/gadget_hid.rst which 462 includes sample code for accessing the device files. 463 464 Say "y" to link the driver statically, or "m" to build a 465 dynamically linked module called "g_hid". 466 467# Standalone / single function gadgets 468config USB_G_DBGP 469 tristate "EHCI Debug Device Gadget" 470 depends on TTY 471 select USB_LIBCOMPOSITE 472 help 473 This gadget emulates an EHCI Debug device. This is useful when you want 474 to interact with an EHCI Debug Port. 475 476 Say "y" to link the driver statically, or "m" to build a 477 dynamically linked module called "g_dbgp". 478 479if USB_G_DBGP 480choice 481 prompt "EHCI Debug Device mode" 482 default USB_G_DBGP_SERIAL 483 484config USB_G_DBGP_PRINTK 485 depends on USB_G_DBGP 486 bool "printk" 487 help 488 Directly printk() received data. No interaction. 489 490config USB_G_DBGP_SERIAL 491 depends on USB_G_DBGP 492 select USB_U_SERIAL 493 bool "serial" 494 help 495 Userland can interact using /dev/ttyGSxxx. 496endchoice 497endif 498 499# put drivers that need isochronous transfer support (for audio 500# or video class gadget drivers), or specific hardware, here. 501config USB_G_WEBCAM 502 tristate "USB Webcam Gadget" 503 depends on VIDEO_DEV 504 select USB_LIBCOMPOSITE 505 select VIDEOBUF2_DMA_SG 506 select VIDEOBUF2_VMALLOC 507 select USB_F_UVC 508 help 509 The Webcam Gadget acts as a composite USB Audio and Video Class 510 device. It provides a userspace API to process UVC control requests 511 and stream video data to the host. 512 513 Say "y" to link the driver statically, or "m" to build a 514 dynamically linked module called "g_webcam". 515 516config USB_RAW_GADGET 517 tristate "USB Raw Gadget" 518 help 519 USB Raw Gadget is a gadget driver that gives userspace low-level 520 control over the gadget's communication process. 521 522 Like any other gadget driver, Raw Gadget implements USB devices via 523 the USB gadget API. Unlike most gadget drivers, Raw Gadget does not 524 implement any concrete USB functions itself but requires userspace 525 to do that. 526 527 See Documentation/usb/raw-gadget.rst for details. 528 529 Say "y" to link the driver statically, or "m" to build a 530 dynamically linked module called "raw_gadget". 531 532endmenu