cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

mv_u3d.h (9945B)


      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
      4 */
      5
      6#ifndef __MV_U3D_H
      7#define __MV_U3D_H
      8
      9#define MV_U3D_EP_CONTEXT_ALIGNMENT	32
     10#define MV_U3D_TRB_ALIGNMENT	16
     11#define MV_U3D_DMA_BOUNDARY	4096
     12#define MV_U3D_EP0_MAX_PKT_SIZE	512
     13
     14/* ep0 transfer state */
     15#define MV_U3D_WAIT_FOR_SETUP		0
     16#define MV_U3D_DATA_STATE_XMIT		1
     17#define MV_U3D_DATA_STATE_NEED_ZLP	2
     18#define MV_U3D_WAIT_FOR_OUT_STATUS	3
     19#define MV_U3D_DATA_STATE_RECV		4
     20#define MV_U3D_STATUS_STAGE		5
     21
     22#define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
     23
     24/* USB3 Interrupt Status */
     25#define MV_U3D_USBINT_SETUP		0x00000001
     26#define MV_U3D_USBINT_RX_COMPLETE	0x00000002
     27#define MV_U3D_USBINT_TX_COMPLETE	0x00000004
     28#define MV_U3D_USBINT_UNDER_RUN	0x00000008
     29#define MV_U3D_USBINT_RXDESC_ERR	0x00000010
     30#define MV_U3D_USBINT_TXDESC_ERR	0x00000020
     31#define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
     32#define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
     33#define MV_U3D_USBINT_VBUS_VALID	0x00010000
     34#define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
     35#define MV_U3D_USBINT_LINK_CHG		0x01000000
     36
     37/* USB3 Interrupt Enable */
     38#define MV_U3D_INTR_ENABLE_SETUP		0x00000001
     39#define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
     40#define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
     41#define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
     42#define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
     43#define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
     44#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
     45#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
     46#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
     47#define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
     48#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
     49#define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
     50#define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
     51
     52/* USB3 Link Change */
     53#define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
     54#define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
     55#define MV_U3D_LINK_CHANGE_RESUME		0x00000004
     56#define MV_U3D_LINK_CHANGE_WRESET		0x00000008
     57#define MV_U3D_LINK_CHANGE_HRESET		0x00000010
     58#define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
     59#define MV_U3D_LINK_CHANGE_INACT		0x00000040
     60#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
     61#define MV_U3D_LINK_CHANGE_U1			0x00000100
     62#define MV_U3D_LINK_CHANGE_U2			0x00000200
     63#define MV_U3D_LINK_CHANGE_U3			0x00000400
     64
     65/* bridge setting */
     66#define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
     67
     68/* Command Register Bit Masks */
     69#define MV_U3D_CMD_RUN_STOP		0x00000001
     70#define MV_U3D_CMD_CTRL_RESET		0x00000002
     71
     72/* ep control register */
     73#define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
     74#define MV_U3D_EPXCR_EP_TYPE_ISOC		1
     75#define MV_U3D_EPXCR_EP_TYPE_BULK		2
     76#define MV_U3D_EPXCR_EP_TYPE_INT		3
     77#define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
     78#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
     79#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
     80#define MV_U3D_USB_BULK_BURST_OUT		6
     81#define MV_U3D_USB_BULK_BURST_IN		14
     82
     83#define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
     84#define MV_U3D_EPXCR_EP_HALT		(1 << 1)
     85#define MV_U3D_EPXCR_EP_INIT		(1)
     86
     87/* TX/RX Status Register */
     88#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
     89#define MV_U3D_COMPLETE_INVALID	0
     90#define MV_U3D_COMPLETE_SUCCESS	1
     91#define MV_U3D_COMPLETE_BUFF_ERR	2
     92#define MV_U3D_COMPLETE_SHORT_PACKET	3
     93#define MV_U3D_COMPLETE_TRB_ERR	5
     94#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
     95
     96#define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
     97
     98#define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
     99#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
    100
    101#define MV_U3D_USB3_OP_REGS_OFFSET	0x100
    102#define MV_U3D_USB3_PHY_OFFSET		0xB800
    103
    104#define DCS_ENABLE	0x1
    105
    106/* timeout */
    107#define MV_U3D_RESET_TIMEOUT		10000
    108#define MV_U3D_FLUSH_TIMEOUT		100000
    109#define MV_U3D_OWN_TIMEOUT		10000
    110#define LOOPS_USEC_SHIFT	4
    111#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
    112#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
    113
    114/* ep direction */
    115#define MV_U3D_EP_DIR_IN		1
    116#define MV_U3D_EP_DIR_OUT		0
    117#define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
    118				((ep)->u3d->ep0_dir) : ((ep)->direction))
    119
    120/* usb capability registers */
    121struct mv_u3d_cap_regs {
    122	u32	rsvd[5];
    123	u32	dboff;	/* doorbell register offset */
    124	u32	rtsoff;	/* runtime register offset */
    125	u32	vuoff;	/* vendor unique register offset */
    126};
    127
    128/* operation registers */
    129struct mv_u3d_op_regs {
    130	u32	usbcmd;		/* Command register */
    131	u32	rsvd1[11];
    132	u32	dcbaapl;	/* Device Context Base Address low register */
    133	u32	dcbaaph;	/* Device Context Base Address high register */
    134	u32	rsvd2[243];
    135	u32	portsc;		/* port status and control register*/
    136	u32	portlinkinfo;	/* port link info register*/
    137	u32	rsvd3[9917];
    138	u32	doorbell;	/* doorbell register */
    139};
    140
    141/* control endpoint enable registers */
    142struct epxcr {
    143	u32	epxoutcr0;	/* ep out control 0 register */
    144	u32	epxoutcr1;	/* ep out control 1 register */
    145	u32	epxincr0;	/* ep in control 0 register */
    146	u32	epxincr1;	/* ep in control 1 register */
    147};
    148
    149/* transfer status registers */
    150struct xferstatus {
    151	u32	curdeqlo;	/* current TRB pointer low */
    152	u32	curdeqhi;	/* current TRB pointer high */
    153	u32	statuslo;	/* transfer status low */
    154	u32	statushi;	/* transfer status high */
    155};
    156
    157/* vendor unique control registers */
    158struct mv_u3d_vuc_regs {
    159	u32	ctrlepenable;	/* control endpoint enable register */
    160	u32	setuplock;	/* setup lock register */
    161	u32	endcomplete;	/* endpoint transfer complete register */
    162	u32	intrcause;	/* interrupt cause register */
    163	u32	intrenable;	/* interrupt enable register */
    164	u32	trbcomplete;	/* TRB complete register */
    165	u32	linkchange;	/* link change register */
    166	u32	rsvd1[5];
    167	u32	trbunderrun;	/* TRB underrun register */
    168	u32	rsvd2[43];
    169	u32	bridgesetting;	/* bridge setting register */
    170	u32	rsvd3[7];
    171	struct xferstatus	txst[16];	/* TX status register */
    172	struct xferstatus	rxst[16];	/* RX status register */
    173	u32	ltssm;		/* LTSSM control register */
    174	u32	pipe;		/* PIPE control register */
    175	u32	linkcr0;	/* link control 0 register */
    176	u32	linkcr1;	/* link control 1 register */
    177	u32	rsvd6[60];
    178	u32	mib0;		/* MIB0 counter register */
    179	u32	usblink;	/* usb link control register */
    180	u32	ltssmstate;	/* LTSSM state register */
    181	u32	linkerrorcause;	/* link error cause register */
    182	u32	rsvd7[60];
    183	u32	devaddrtiebrkr;	/* device address and tie breaker */
    184	u32	itpinfo0;	/* ITP info 0 register */
    185	u32	itpinfo1;	/* ITP info 1 register */
    186	u32	rsvd8[61];
    187	struct epxcr	epcr[16];	/* ep control register */
    188	u32	rsvd9[64];
    189	u32	phyaddr;	/* PHY address register */
    190	u32	phydata;	/* PHY data register */
    191};
    192
    193/* Endpoint context structure */
    194struct mv_u3d_ep_context {
    195	u32	rsvd0;
    196	u32	rsvd1;
    197	u32	trb_addr_lo;		/* TRB address low 32 bit */
    198	u32	trb_addr_hi;		/* TRB address high 32 bit */
    199	u32	rsvd2;
    200	u32	rsvd3;
    201	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
    202};
    203
    204/* TRB control data structure */
    205struct mv_u3d_trb_ctrl {
    206	u32	own:1;		/* owner of TRB */
    207	u32	rsvd1:3;
    208	u32	chain:1;	/* associate this TRB with the
    209				next TRB on the Ring */
    210	u32	ioc:1;		/* interrupt on complete */
    211	u32	rsvd2:4;
    212	u32	type:6;		/* TRB type */
    213#define TYPE_NORMAL	1
    214#define TYPE_DATA	3
    215#define TYPE_LINK	6
    216	u32	dir:1;		/* Working at data stage of control endpoint
    217				operation. 0 is OUT and 1 is IN. */
    218	u32	rsvd3:15;
    219};
    220
    221/* TRB data structure
    222 * For multiple TRB, all the TRBs' physical address should be continuous.
    223 */
    224struct mv_u3d_trb_hw {
    225	u32	buf_addr_lo;	/* data buffer address low 32 bit */
    226	u32	buf_addr_hi;	/* data buffer address high 32 bit */
    227	u32	trb_len;	/* transfer length */
    228	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
    229};
    230
    231/* TRB structure */
    232struct mv_u3d_trb {
    233	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
    234	dma_addr_t trb_dma;		/* dma address for this trb_hw */
    235	struct list_head trb_list;	/* trb list */
    236};
    237
    238/* device data structure */
    239struct mv_u3d {
    240	struct usb_gadget		gadget;
    241	struct usb_gadget_driver	*driver;
    242	spinlock_t			lock;	/* device lock */
    243	struct completion		*done;
    244	struct device			*dev;
    245	int				irq;
    246
    247	/* usb controller registers */
    248	struct mv_u3d_cap_regs __iomem	*cap_regs;
    249	struct mv_u3d_op_regs __iomem	*op_regs;
    250	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
    251	void __iomem			*phy_regs;
    252
    253	unsigned int			max_eps;
    254	struct mv_u3d_ep_context	*ep_context;
    255	size_t				ep_context_size;
    256	dma_addr_t			ep_context_dma;
    257
    258	struct dma_pool			*trb_pool; /* for TRB data structure */
    259	struct mv_u3d_ep		*eps;
    260
    261	struct mv_u3d_req		*status_req; /* ep0 status request */
    262	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
    263
    264	unsigned int		resume_state;	/* USB state to resume */
    265	unsigned int		usb_state;	/* USB current state */
    266	unsigned int		ep0_state;	/* Endpoint zero state */
    267	unsigned int		ep0_dir;
    268
    269	unsigned int		dev_addr;	/* device address */
    270
    271	unsigned int		errors;
    272
    273	unsigned		softconnect:1;
    274	unsigned		vbus_active:1;	/* vbus is active or not */
    275	unsigned		remote_wakeup:1; /* support remote wakeup */
    276	unsigned		clock_gating:1;	/* clock gating or not */
    277	unsigned		active:1;	/* udc is active or not */
    278	unsigned		vbus_valid_detect:1; /* udc vbus detection */
    279
    280	struct mv_usb_addon_irq *vbus;
    281	unsigned int		power;
    282
    283	struct clk		*clk;
    284};
    285
    286/* endpoint data structure */
    287struct mv_u3d_ep {
    288	struct usb_ep		ep;
    289	struct mv_u3d		*u3d;
    290	struct list_head	queue;	/* ep request queued hardware */
    291	struct list_head	req_list; /* list of ep request */
    292	struct mv_u3d_ep_context	*ep_context; /* ep context */
    293	u32			direction;
    294	char			name[14];
    295	u32			processing; /* there is ep request
    296						queued on haredware */
    297	spinlock_t		req_lock; /* ep lock */
    298	unsigned		wedge:1;
    299	unsigned		enabled:1;
    300	unsigned		ep_type:2;
    301	unsigned		ep_num:8;
    302};
    303
    304/* request data structure */
    305struct mv_u3d_req {
    306	struct usb_request	req;
    307	struct mv_u3d_ep	*ep;
    308	struct list_head	queue;	/* ep requst queued on hardware */
    309	struct list_head	list;	/* ep request list */
    310	struct list_head	trb_list; /* trb list of a request */
    311
    312	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
    313	unsigned		trb_count; /* TRB number in the chain */
    314	unsigned		chain;	   /* TRB chain or not */
    315};
    316
    317#endif