emi62.c (7857B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Emagic EMI 2|6 usb audio interface firmware loader. 4 * Copyright (C) 2002 5 * Tapio Laxström (tapio.laxstrom@iptime.fi) 6 */ 7#include <linux/kernel.h> 8#include <linux/errno.h> 9#include <linux/slab.h> 10#include <linux/module.h> 11#include <linux/usb.h> 12#include <linux/delay.h> 13#include <linux/firmware.h> 14#include <linux/ihex.h> 15 16/* include firmware (variables)*/ 17 18/* FIXME: This is quick and dirty solution! */ 19#define SPDIF /* if you want SPDIF comment next line */ 20//#undef SPDIF /* if you want MIDI uncomment this line */ 21 22#ifdef SPDIF 23#define FIRMWARE_FW "emi62/spdif.fw" 24#else 25#define FIRMWARE_FW "emi62/midi.fw" 26#endif 27 28#define EMI62_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ 29#define EMI62_PRODUCT_ID 0x0110 /* EMI 6|2m without firmware */ 30 31#define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ 32#define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ 33#define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ 34#define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ 35#define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ 36#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) 37 38static int emi62_writememory(struct usb_device *dev, int address, 39 const unsigned char *data, int length, 40 __u8 bRequest); 41static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit); 42static int emi62_load_firmware (struct usb_device *dev); 43static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id); 44static void emi62_disconnect(struct usb_interface *intf); 45 46/* thanks to drivers/usb/serial/keyspan_pda.c code */ 47static int emi62_writememory(struct usb_device *dev, int address, 48 const unsigned char *data, int length, 49 __u8 request) 50{ 51 int result; 52 unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); 53 54 if (!buffer) { 55 dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); 56 return -ENOMEM; 57 } 58 /* Note: usb_control_msg returns negative value on error or length of the 59 * data that was written! */ 60 result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); 61 kfree (buffer); 62 return result; 63} 64 65/* thanks to drivers/usb/serial/keyspan_pda.c code */ 66static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit) 67{ 68 int response; 69 dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); 70 71 response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); 72 if (response < 0) 73 dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); 74 return response; 75} 76 77#define FW_LOAD_SIZE 1023 78 79static int emi62_load_firmware (struct usb_device *dev) 80{ 81 const struct firmware *loader_fw = NULL; 82 const struct firmware *bitstream_fw = NULL; 83 const struct firmware *firmware_fw = NULL; 84 const struct ihex_binrec *rec; 85 int err = -ENOMEM; 86 int i; 87 __u32 addr; /* Address to write */ 88 __u8 *buf; 89 90 dev_dbg(&dev->dev, "load_firmware\n"); 91 buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); 92 if (!buf) 93 goto wraperr; 94 95 err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev); 96 if (err) 97 goto nofw; 98 99 err = request_ihex_firmware(&bitstream_fw, "emi62/bitstream.fw", 100 &dev->dev); 101 if (err) 102 goto nofw; 103 104 err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev); 105 if (err) { 106 nofw: 107 goto wraperr; 108 } 109 110 /* Assert reset (stop the CPU in the EMI) */ 111 err = emi62_set_reset(dev,1); 112 if (err < 0) 113 goto wraperr; 114 115 rec = (const struct ihex_binrec *)loader_fw->data; 116 117 /* 1. We need to put the loader for the FPGA into the EZ-USB */ 118 while (rec) { 119 err = emi62_writememory(dev, be32_to_cpu(rec->addr), 120 rec->data, be16_to_cpu(rec->len), 121 ANCHOR_LOAD_INTERNAL); 122 if (err < 0) 123 goto wraperr; 124 rec = ihex_next_binrec(rec); 125 } 126 127 /* De-assert reset (let the CPU run) */ 128 err = emi62_set_reset(dev,0); 129 if (err < 0) 130 goto wraperr; 131 msleep(250); /* let device settle */ 132 133 /* 2. We upload the FPGA firmware into the EMI 134 * Note: collect up to 1023 (yes!) bytes and send them with 135 * a single request. This is _much_ faster! */ 136 rec = (const struct ihex_binrec *)bitstream_fw->data; 137 do { 138 i = 0; 139 addr = be32_to_cpu(rec->addr); 140 141 /* intel hex records are terminated with type 0 element */ 142 while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) { 143 memcpy(buf + i, rec->data, be16_to_cpu(rec->len)); 144 i += be16_to_cpu(rec->len); 145 rec = ihex_next_binrec(rec); 146 } 147 err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); 148 if (err < 0) 149 goto wraperr; 150 } while (rec); 151 152 /* Assert reset (stop the CPU in the EMI) */ 153 err = emi62_set_reset(dev,1); 154 if (err < 0) 155 goto wraperr; 156 157 /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ 158 for (rec = (const struct ihex_binrec *)loader_fw->data; 159 rec; rec = ihex_next_binrec(rec)) { 160 err = emi62_writememory(dev, be32_to_cpu(rec->addr), 161 rec->data, be16_to_cpu(rec->len), 162 ANCHOR_LOAD_INTERNAL); 163 if (err < 0) 164 goto wraperr; 165 } 166 167 /* De-assert reset (let the CPU run) */ 168 err = emi62_set_reset(dev,0); 169 if (err < 0) 170 goto wraperr; 171 msleep(250); /* let device settle */ 172 173 /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ 174 175 for (rec = (const struct ihex_binrec *)firmware_fw->data; 176 rec; rec = ihex_next_binrec(rec)) { 177 if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) { 178 err = emi62_writememory(dev, be32_to_cpu(rec->addr), 179 rec->data, be16_to_cpu(rec->len), 180 ANCHOR_LOAD_EXTERNAL); 181 if (err < 0) 182 goto wraperr; 183 } 184 } 185 186 /* Assert reset (stop the CPU in the EMI) */ 187 err = emi62_set_reset(dev,1); 188 if (err < 0) 189 goto wraperr; 190 191 for (rec = (const struct ihex_binrec *)firmware_fw->data; 192 rec; rec = ihex_next_binrec(rec)) { 193 if (INTERNAL_RAM(be32_to_cpu(rec->addr))) { 194 err = emi62_writememory(dev, be32_to_cpu(rec->addr), 195 rec->data, be16_to_cpu(rec->len), 196 ANCHOR_LOAD_EXTERNAL); 197 if (err < 0) 198 goto wraperr; 199 } 200 } 201 202 /* De-assert reset (let the CPU run) */ 203 err = emi62_set_reset(dev,0); 204 if (err < 0) 205 goto wraperr; 206 msleep(250); /* let device settle */ 207 208 release_firmware(loader_fw); 209 release_firmware(bitstream_fw); 210 release_firmware(firmware_fw); 211 212 kfree(buf); 213 214 /* return 1 to fail the driver inialization 215 * and give real driver change to load */ 216 return 1; 217 218wraperr: 219 if (err < 0) 220 dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", 221 __func__, err); 222 release_firmware(loader_fw); 223 release_firmware(bitstream_fw); 224 release_firmware(firmware_fw); 225 226 kfree(buf); 227 dev_err(&dev->dev, "Error\n"); 228 return err; 229} 230 231static const struct usb_device_id id_table[] = { 232 { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, 233 { } /* Terminating entry */ 234}; 235 236MODULE_DEVICE_TABLE (usb, id_table); 237 238static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id) 239{ 240 struct usb_device *dev = interface_to_usbdev(intf); 241 dev_dbg(&intf->dev, "emi62_probe\n"); 242 243 dev_info(&intf->dev, "%s start\n", __func__); 244 245 emi62_load_firmware(dev); 246 247 /* do not return the driver context, let real audio driver do that */ 248 return -EIO; 249} 250 251static void emi62_disconnect(struct usb_interface *intf) 252{ 253} 254 255static struct usb_driver emi62_driver = { 256 .name = "emi62 - firmware loader", 257 .probe = emi62_probe, 258 .disconnect = emi62_disconnect, 259 .id_table = id_table, 260}; 261 262module_usb_driver(emi62_driver); 263 264MODULE_AUTHOR("Tapio Laxström"); 265MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader."); 266MODULE_LICENSE("GPL"); 267 268MODULE_FIRMWARE("emi62/loader.fw"); 269MODULE_FIRMWARE("emi62/bitstream.fw"); 270MODULE_FIRMWARE(FIRMWARE_FW); 271/* vi:ai:syntax=c:sw=8:ts=8:tw=80 272 */