cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

tusb6010_omap.c (16714B)


      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
      4 *
      5 * Copyright (C) 2006 Nokia Corporation
      6 * Tony Lindgren <tony@atomide.com>
      7 */
      8#include <linux/module.h>
      9#include <linux/kernel.h>
     10#include <linux/errno.h>
     11#include <linux/usb.h>
     12#include <linux/platform_device.h>
     13#include <linux/dma-mapping.h>
     14#include <linux/slab.h>
     15#include <linux/dmaengine.h>
     16
     17#include "musb_core.h"
     18#include "tusb6010.h"
     19
     20#define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data)
     21
     22#define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
     23
     24struct tusb_dma_data {
     25	s8			dmareq;
     26	struct dma_chan		*chan;
     27};
     28
     29struct tusb_omap_dma_ch {
     30	struct musb		*musb;
     31	void __iomem		*tbase;
     32	unsigned long		phys_offset;
     33	int			epnum;
     34	u8			tx;
     35	struct musb_hw_ep	*hw_ep;
     36
     37	struct tusb_dma_data	*dma_data;
     38
     39	struct tusb_omap_dma	*tusb_dma;
     40
     41	dma_addr_t		dma_addr;
     42
     43	u32			len;
     44	u16			packet_sz;
     45	u16			transfer_packet_sz;
     46	u32			transfer_len;
     47	u32			completed_len;
     48};
     49
     50struct tusb_omap_dma {
     51	struct dma_controller		controller;
     52	void __iomem			*tbase;
     53
     54	struct tusb_dma_data		dma_pool[MAX_DMAREQ];
     55	unsigned			multichannel:1;
     56};
     57
     58/*
     59 * Allocate dmareq0 to the current channel unless it's already taken
     60 */
     61static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
     62{
     63	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
     64
     65	if (reg != 0) {
     66		dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n",
     67			chdat->epnum, reg & 0xf);
     68		return -EAGAIN;
     69	}
     70
     71	if (chdat->tx)
     72		reg = (1 << 4) | chdat->epnum;
     73	else
     74		reg = chdat->epnum;
     75
     76	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
     77
     78	return 0;
     79}
     80
     81static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
     82{
     83	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
     84
     85	if ((reg & 0xf) != chdat->epnum) {
     86		printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
     87			chdat->epnum, reg & 0xf);
     88		return;
     89	}
     90	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
     91}
     92
     93/*
     94 * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
     95 * musb_gadget.c.
     96 */
     97static void tusb_omap_dma_cb(void *data)
     98{
     99	struct dma_channel	*channel = (struct dma_channel *)data;
    100	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
    101	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
    102	struct musb		*musb = chdat->musb;
    103	struct device		*dev = musb->controller;
    104	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
    105	void __iomem		*ep_conf = hw_ep->conf;
    106	void __iomem		*mbase = musb->mregs;
    107	unsigned long		remaining, flags, pio;
    108
    109	spin_lock_irqsave(&musb->lock, flags);
    110
    111	dev_dbg(musb->controller, "ep%i %s dma callback\n",
    112		chdat->epnum, chdat->tx ? "tx" : "rx");
    113
    114	if (chdat->tx)
    115		remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
    116	else
    117		remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
    118
    119	remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
    120
    121	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
    122	if (unlikely(remaining > chdat->transfer_len)) {
    123		dev_dbg(musb->controller, "Corrupt %s XFR_SIZE: 0x%08lx\n",
    124			chdat->tx ? "tx" : "rx", remaining);
    125		remaining = 0;
    126	}
    127
    128	channel->actual_len = chdat->transfer_len - remaining;
    129	pio = chdat->len - channel->actual_len;
    130
    131	dev_dbg(musb->controller, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
    132
    133	/* Transfer remaining 1 - 31 bytes */
    134	if (pio > 0 && pio < 32) {
    135		u8	*buf;
    136
    137		dev_dbg(musb->controller, "Using PIO for remaining %lu bytes\n", pio);
    138		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
    139		if (chdat->tx) {
    140			dma_unmap_single(dev, chdat->dma_addr,
    141						chdat->transfer_len,
    142						DMA_TO_DEVICE);
    143			musb_write_fifo(hw_ep, pio, buf);
    144		} else {
    145			dma_unmap_single(dev, chdat->dma_addr,
    146						chdat->transfer_len,
    147						DMA_FROM_DEVICE);
    148			musb_read_fifo(hw_ep, pio, buf);
    149		}
    150		channel->actual_len += pio;
    151	}
    152
    153	if (!tusb_dma->multichannel)
    154		tusb_omap_free_shared_dmareq(chdat);
    155
    156	channel->status = MUSB_DMA_STATUS_FREE;
    157
    158	musb_dma_completion(musb, chdat->epnum, chdat->tx);
    159
    160	/* We must terminate short tx transfers manually by setting TXPKTRDY.
    161	 * REVISIT: This same problem may occur with other MUSB dma as well.
    162	 * Easy to test with g_ether by pinging the MUSB board with ping -s54.
    163	 */
    164	if ((chdat->transfer_len < chdat->packet_sz)
    165			|| (chdat->transfer_len % chdat->packet_sz != 0)) {
    166		u16	csr;
    167
    168		if (chdat->tx) {
    169			dev_dbg(musb->controller, "terminating short tx packet\n");
    170			musb_ep_select(mbase, chdat->epnum);
    171			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
    172			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
    173				| MUSB_TXCSR_P_WZC_BITS;
    174			musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
    175		}
    176	}
    177
    178	spin_unlock_irqrestore(&musb->lock, flags);
    179}
    180
    181static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
    182				u8 rndis_mode, dma_addr_t dma_addr, u32 len)
    183{
    184	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
    185	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
    186	struct musb			*musb = chdat->musb;
    187	struct device			*dev = musb->controller;
    188	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
    189	void __iomem			*mbase = musb->mregs;
    190	void __iomem			*ep_conf = hw_ep->conf;
    191	dma_addr_t			fifo_addr = hw_ep->fifo_sync;
    192	u32				dma_remaining;
    193	u16				csr;
    194	u32				psize;
    195	struct tusb_dma_data		*dma_data;
    196	struct dma_async_tx_descriptor	*dma_desc;
    197	struct dma_slave_config		dma_cfg;
    198	enum dma_transfer_direction	dma_dir;
    199	u32				port_window;
    200	int				ret;
    201
    202	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
    203		return false;
    204
    205	/*
    206	 * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
    207	 * register which will cause missed DMA interrupt. We could try to
    208	 * use a timer for the callback, but it is unsafe as the XFR_SIZE
    209	 * register is corrupt, and we won't know if the DMA worked.
    210	 */
    211	if (dma_addr & 0x2)
    212		return false;
    213
    214	/*
    215	 * Because of HW issue #10, it seems like mixing sync DMA and async
    216	 * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
    217	 * using the channel for DMA.
    218	 */
    219	if (chdat->tx)
    220		dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
    221	else
    222		dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
    223
    224	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
    225	if (dma_remaining) {
    226		dev_dbg(musb->controller, "Busy %s dma, not using: %08x\n",
    227			chdat->tx ? "tx" : "rx", dma_remaining);
    228		return false;
    229	}
    230
    231	chdat->transfer_len = len & ~0x1f;
    232
    233	if (len < packet_sz)
    234		chdat->transfer_packet_sz = chdat->transfer_len;
    235	else
    236		chdat->transfer_packet_sz = packet_sz;
    237
    238	dma_data = chdat->dma_data;
    239	if (!tusb_dma->multichannel) {
    240		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
    241			dev_dbg(musb->controller, "could not get dma for ep%i\n", chdat->epnum);
    242			return false;
    243		}
    244		if (dma_data->dmareq < 0) {
    245			/* REVISIT: This should get blocked earlier, happens
    246			 * with MSC ErrorRecoveryTest
    247			 */
    248			WARN_ON(1);
    249			return false;
    250		}
    251	}
    252
    253	chdat->packet_sz = packet_sz;
    254	chdat->len = len;
    255	channel->actual_len = 0;
    256	chdat->dma_addr = dma_addr;
    257	channel->status = MUSB_DMA_STATUS_BUSY;
    258
    259	/* Since we're recycling dma areas, we need to clean or invalidate */
    260	if (chdat->tx) {
    261		dma_dir = DMA_MEM_TO_DEV;
    262		dma_map_single(dev, phys_to_virt(dma_addr), len,
    263				DMA_TO_DEVICE);
    264	} else {
    265		dma_dir = DMA_DEV_TO_MEM;
    266		dma_map_single(dev, phys_to_virt(dma_addr), len,
    267				DMA_FROM_DEVICE);
    268	}
    269
    270	memset(&dma_cfg, 0, sizeof(dma_cfg));
    271
    272	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
    273	if ((dma_addr & 0x3) == 0) {
    274		dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
    275		dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
    276		port_window = 8;
    277	} else {
    278		dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
    279		dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
    280		port_window = 16;
    281
    282		fifo_addr = hw_ep->fifo_async;
    283	}
    284
    285	dev_dbg(musb->controller,
    286		"ep%i %s dma: %pad len: %u(%u) packet_sz: %i(%i)\n",
    287		chdat->epnum, chdat->tx ? "tx" : "rx", &dma_addr,
    288		chdat->transfer_len, len, chdat->transfer_packet_sz, packet_sz);
    289
    290	dma_cfg.src_addr = fifo_addr;
    291	dma_cfg.dst_addr = fifo_addr;
    292	dma_cfg.src_port_window_size = port_window;
    293	dma_cfg.src_maxburst = port_window;
    294	dma_cfg.dst_port_window_size = port_window;
    295	dma_cfg.dst_maxburst = port_window;
    296
    297	ret = dmaengine_slave_config(dma_data->chan, &dma_cfg);
    298	if (ret) {
    299		dev_err(musb->controller, "DMA slave config failed: %d\n", ret);
    300		return false;
    301	}
    302
    303	dma_desc = dmaengine_prep_slave_single(dma_data->chan, dma_addr,
    304					chdat->transfer_len, dma_dir,
    305					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
    306	if (!dma_desc) {
    307		dev_err(musb->controller, "DMA prep_slave_single failed\n");
    308		return false;
    309	}
    310
    311	dma_desc->callback = tusb_omap_dma_cb;
    312	dma_desc->callback_param = channel;
    313	dmaengine_submit(dma_desc);
    314
    315	dev_dbg(musb->controller,
    316		"ep%i %s using %i-bit %s dma from %pad to %pad\n",
    317		chdat->epnum, chdat->tx ? "tx" : "rx",
    318		dma_cfg.src_addr_width * 8,
    319		((dma_addr & 0x3) == 0) ? "sync" : "async",
    320		(dma_dir == DMA_MEM_TO_DEV) ? &dma_addr : &fifo_addr,
    321		(dma_dir == DMA_MEM_TO_DEV) ? &fifo_addr : &dma_addr);
    322
    323	/*
    324	 * Prepare MUSB for DMA transfer
    325	 */
    326	musb_ep_select(mbase, chdat->epnum);
    327	if (chdat->tx) {
    328		csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
    329		csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
    330			| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
    331		csr &= ~MUSB_TXCSR_P_UNDERRUN;
    332		musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
    333	} else {
    334		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
    335		csr |= MUSB_RXCSR_DMAENAB;
    336		csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
    337		musb_writew(hw_ep->regs, MUSB_RXCSR,
    338			csr | MUSB_RXCSR_P_WZC_BITS);
    339	}
    340
    341	/* Start DMA transfer */
    342	dma_async_issue_pending(dma_data->chan);
    343
    344	if (chdat->tx) {
    345		/* Send transfer_packet_sz packets at a time */
    346		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
    347		psize &= ~0x7ff;
    348		psize |= chdat->transfer_packet_sz;
    349		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
    350
    351		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
    352			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
    353	} else {
    354		/* Receive transfer_packet_sz packets at a time */
    355		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
    356		psize &= ~(0x7ff << 16);
    357		psize |= (chdat->transfer_packet_sz << 16);
    358		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
    359
    360		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
    361			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
    362	}
    363
    364	return true;
    365}
    366
    367static int tusb_omap_dma_abort(struct dma_channel *channel)
    368{
    369	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
    370
    371	if (chdat->dma_data)
    372		dmaengine_terminate_all(chdat->dma_data->chan);
    373
    374	channel->status = MUSB_DMA_STATUS_FREE;
    375
    376	return 0;
    377}
    378
    379static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
    380{
    381	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
    382	int		i, dmareq_nr = -1;
    383
    384	for (i = 0; i < MAX_DMAREQ; i++) {
    385		int cur = (reg & (0xf << (i * 5))) >> (i * 5);
    386		if (cur == 0) {
    387			dmareq_nr = i;
    388			break;
    389		}
    390	}
    391
    392	if (dmareq_nr == -1)
    393		return -EAGAIN;
    394
    395	reg |= (chdat->epnum << (dmareq_nr * 5));
    396	if (chdat->tx)
    397		reg |= ((1 << 4) << (dmareq_nr * 5));
    398	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
    399
    400	chdat->dma_data = &chdat->tusb_dma->dma_pool[dmareq_nr];
    401
    402	return 0;
    403}
    404
    405static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
    406{
    407	u32 reg;
    408
    409	if (!chdat || !chdat->dma_data || chdat->dma_data->dmareq < 0)
    410		return;
    411
    412	reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
    413	reg &= ~(0x1f << (chdat->dma_data->dmareq * 5));
    414	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
    415
    416	chdat->dma_data = NULL;
    417}
    418
    419static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
    420
    421static struct dma_channel *
    422tusb_omap_dma_allocate(struct dma_controller *c,
    423		struct musb_hw_ep *hw_ep,
    424		u8 tx)
    425{
    426	int ret, i;
    427	struct tusb_omap_dma	*tusb_dma;
    428	struct musb		*musb;
    429	struct dma_channel	*channel = NULL;
    430	struct tusb_omap_dma_ch	*chdat = NULL;
    431	struct tusb_dma_data	*dma_data = NULL;
    432
    433	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
    434	musb = tusb_dma->controller.musb;
    435
    436	/* REVISIT: Why does dmareq5 not work? */
    437	if (hw_ep->epnum == 0) {
    438		dev_dbg(musb->controller, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
    439		return NULL;
    440	}
    441
    442	for (i = 0; i < MAX_DMAREQ; i++) {
    443		struct dma_channel *ch = dma_channel_pool[i];
    444		if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
    445			ch->status = MUSB_DMA_STATUS_FREE;
    446			channel = ch;
    447			chdat = ch->private_data;
    448			break;
    449		}
    450	}
    451
    452	if (!channel)
    453		return NULL;
    454
    455	chdat->musb = tusb_dma->controller.musb;
    456	chdat->tbase = tusb_dma->tbase;
    457	chdat->hw_ep = hw_ep;
    458	chdat->epnum = hw_ep->epnum;
    459	chdat->completed_len = 0;
    460	chdat->tusb_dma = tusb_dma;
    461	if (tx)
    462		chdat->tx = 1;
    463	else
    464		chdat->tx = 0;
    465
    466	channel->max_len = 0x7fffffff;
    467	channel->desired_mode = 0;
    468	channel->actual_len = 0;
    469
    470	if (!chdat->dma_data) {
    471		if (tusb_dma->multichannel) {
    472			ret = tusb_omap_dma_allocate_dmareq(chdat);
    473			if (ret != 0)
    474				goto free_dmareq;
    475		} else {
    476			chdat->dma_data = &tusb_dma->dma_pool[0];
    477		}
    478	}
    479
    480	dma_data = chdat->dma_data;
    481
    482	dev_dbg(musb->controller, "ep%i %s dma: %s dmareq%i\n",
    483		chdat->epnum,
    484		chdat->tx ? "tx" : "rx",
    485		tusb_dma->multichannel ? "shared" : "dedicated",
    486		dma_data->dmareq);
    487
    488	return channel;
    489
    490free_dmareq:
    491	tusb_omap_dma_free_dmareq(chdat);
    492
    493	dev_dbg(musb->controller, "ep%i: Could not get a DMA channel\n", chdat->epnum);
    494	channel->status = MUSB_DMA_STATUS_UNKNOWN;
    495
    496	return NULL;
    497}
    498
    499static void tusb_omap_dma_release(struct dma_channel *channel)
    500{
    501	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
    502	struct musb		*musb = chdat->musb;
    503
    504	dev_dbg(musb->controller, "Release for ep%i\n", chdat->epnum);
    505
    506	channel->status = MUSB_DMA_STATUS_UNKNOWN;
    507
    508	dmaengine_terminate_sync(chdat->dma_data->chan);
    509	tusb_omap_dma_free_dmareq(chdat);
    510
    511	channel = NULL;
    512}
    513
    514void tusb_dma_controller_destroy(struct dma_controller *c)
    515{
    516	struct tusb_omap_dma	*tusb_dma;
    517	int			i;
    518
    519	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
    520	for (i = 0; i < MAX_DMAREQ; i++) {
    521		struct dma_channel *ch = dma_channel_pool[i];
    522		if (ch) {
    523			kfree(ch->private_data);
    524			kfree(ch);
    525		}
    526
    527		/* Free up the DMA channels */
    528		if (tusb_dma && tusb_dma->dma_pool[i].chan)
    529			dma_release_channel(tusb_dma->dma_pool[i].chan);
    530	}
    531
    532	kfree(tusb_dma);
    533}
    534EXPORT_SYMBOL_GPL(tusb_dma_controller_destroy);
    535
    536static int tusb_omap_allocate_dma_pool(struct tusb_omap_dma *tusb_dma)
    537{
    538	struct musb *musb = tusb_dma->controller.musb;
    539	int i;
    540	int ret = 0;
    541
    542	for (i = 0; i < MAX_DMAREQ; i++) {
    543		struct tusb_dma_data *dma_data = &tusb_dma->dma_pool[i];
    544
    545		/*
    546		 * Request DMA channels:
    547		 * - one channel in case of non multichannel mode
    548		 * - MAX_DMAREQ number of channels in multichannel mode
    549		 */
    550		if (i == 0 || tusb_dma->multichannel) {
    551			char ch_name[8];
    552
    553			sprintf(ch_name, "dmareq%d", i);
    554			dma_data->chan = dma_request_chan(musb->controller,
    555							  ch_name);
    556			if (IS_ERR(dma_data->chan)) {
    557				dev_err(musb->controller,
    558					"Failed to request %s\n", ch_name);
    559				ret = PTR_ERR(dma_data->chan);
    560				goto dma_error;
    561			}
    562
    563			dma_data->dmareq = i;
    564		} else {
    565			dma_data->dmareq = -1;
    566		}
    567	}
    568
    569	return 0;
    570
    571dma_error:
    572	for (; i >= 0; i--) {
    573		struct tusb_dma_data *dma_data = &tusb_dma->dma_pool[i];
    574
    575		if (dma_data->dmareq >= 0)
    576			dma_release_channel(dma_data->chan);
    577	}
    578
    579	return ret;
    580}
    581
    582struct dma_controller *
    583tusb_dma_controller_create(struct musb *musb, void __iomem *base)
    584{
    585	void __iomem		*tbase = musb->ctrl_base;
    586	struct tusb_omap_dma	*tusb_dma;
    587	int			i;
    588
    589	/* REVISIT: Get dmareq lines used from board-*.c */
    590
    591	musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
    592	musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
    593
    594	musb_writel(tbase, TUSB_DMA_REQ_CONF,
    595		TUSB_DMA_REQ_CONF_BURST_SIZE(2)
    596		| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
    597		| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
    598
    599	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
    600	if (!tusb_dma)
    601		goto out;
    602
    603	tusb_dma->controller.musb = musb;
    604	tusb_dma->tbase = musb->ctrl_base;
    605
    606	tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
    607	tusb_dma->controller.channel_release = tusb_omap_dma_release;
    608	tusb_dma->controller.channel_program = tusb_omap_dma_program;
    609	tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
    610
    611	if (musb->tusb_revision >= TUSB_REV_30)
    612		tusb_dma->multichannel = 1;
    613
    614	for (i = 0; i < MAX_DMAREQ; i++) {
    615		struct dma_channel	*ch;
    616		struct tusb_omap_dma_ch	*chdat;
    617
    618		ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
    619		if (!ch)
    620			goto cleanup;
    621
    622		dma_channel_pool[i] = ch;
    623
    624		chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
    625		if (!chdat)
    626			goto cleanup;
    627
    628		ch->status = MUSB_DMA_STATUS_UNKNOWN;
    629		ch->private_data = chdat;
    630	}
    631
    632	if (tusb_omap_allocate_dma_pool(tusb_dma))
    633		goto cleanup;
    634
    635	return &tusb_dma->controller;
    636
    637cleanup:
    638	musb_dma_controller_destroy(&tusb_dma->controller);
    639out:
    640	return NULL;
    641}
    642EXPORT_SYMBOL_GPL(tusb_dma_controller_create);