display_gx.c (4727B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Geode GX display controller. 4 * 5 * Copyright (C) 2005 Arcom Control Systems Ltd. 6 * 7 * Portions from AMD's original 2.4 driver: 8 * Copyright (C) 2004 Advanced Micro Devices, Inc. 9 */ 10#include <linux/spinlock.h> 11#include <linux/fb.h> 12#include <linux/delay.h> 13#include <asm/io.h> 14#include <asm/div64.h> 15#include <asm/delay.h> 16#include <linux/cs5535.h> 17 18#include "gxfb.h" 19 20unsigned int gx_frame_buffer_size(void) 21{ 22 unsigned int val; 23 24 if (!cs5535_has_vsa2()) { 25 uint32_t hi, lo; 26 27 /* The number of pages is (PMAX - PMIN)+1 */ 28 rdmsr(MSR_GLIU_P2D_RO0, lo, hi); 29 30 /* PMAX */ 31 val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); 32 /* PMIN */ 33 val -= (lo & 0x000fffff); 34 val += 1; 35 36 /* The page size is 4k */ 37 return (val << 12); 38 } 39 40 /* FB size can be obtained from the VSA II */ 41 /* Virtual register class = 0x02 */ 42 /* VG_MEM_SIZE(512Kb units) = 0x00 */ 43 44 outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); 45 outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX); 46 47 val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFFl; 48 return (val << 19); 49} 50 51int gx_line_delta(int xres, int bpp) 52{ 53 /* Must be a multiple of 8 bytes. */ 54 return (xres * (bpp >> 3) + 7) & ~0x7; 55} 56 57void gx_set_mode(struct fb_info *info) 58{ 59 struct gxfb_par *par = info->par; 60 u32 gcfg, dcfg; 61 int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal; 62 int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; 63 64 /* Unlock the display controller registers. */ 65 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK); 66 67 gcfg = read_dc(par, DC_GENERAL_CFG); 68 dcfg = read_dc(par, DC_DISPLAY_CFG); 69 70 /* Disable the timing generator. */ 71 dcfg &= ~DC_DISPLAY_CFG_TGEN; 72 write_dc(par, DC_DISPLAY_CFG, dcfg); 73 74 /* Wait for pending memory requests before disabling the FIFO load. */ 75 udelay(100); 76 77 /* Disable FIFO load and compression. */ 78 gcfg &= ~(DC_GENERAL_CFG_DFLE | DC_GENERAL_CFG_CMPE | 79 DC_GENERAL_CFG_DECE); 80 write_dc(par, DC_GENERAL_CFG, gcfg); 81 82 /* Setup DCLK and its divisor. */ 83 gx_set_dclk_frequency(info); 84 85 /* 86 * Setup new mode. 87 */ 88 89 /* Clear all unused feature bits. */ 90 gcfg &= DC_GENERAL_CFG_YUVM | DC_GENERAL_CFG_VDSE; 91 dcfg = 0; 92 93 /* Set FIFO priority (default 6/5) and enable. */ 94 /* FIXME: increase fifo priority for 1280x1024 and higher modes? */ 95 gcfg |= (6 << DC_GENERAL_CFG_DFHPEL_SHIFT) | 96 (5 << DC_GENERAL_CFG_DFHPSL_SHIFT) | DC_GENERAL_CFG_DFLE; 97 98 /* Framebuffer start offset. */ 99 write_dc(par, DC_FB_ST_OFFSET, 0); 100 101 /* Line delta and line buffer length. */ 102 write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3); 103 write_dc(par, DC_LINE_SIZE, 104 ((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2); 105 106 107 /* Enable graphics and video data and unmask address lines. */ 108 dcfg |= DC_DISPLAY_CFG_GDEN | DC_DISPLAY_CFG_VDEN | 109 DC_DISPLAY_CFG_A20M | DC_DISPLAY_CFG_A18M; 110 111 /* Set pixel format. */ 112 switch (info->var.bits_per_pixel) { 113 case 8: 114 dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP; 115 break; 116 case 16: 117 dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP; 118 break; 119 case 32: 120 dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP; 121 dcfg |= DC_DISPLAY_CFG_PALB; 122 break; 123 } 124 125 /* Enable timing generator. */ 126 dcfg |= DC_DISPLAY_CFG_TGEN; 127 128 /* Horizontal and vertical timings. */ 129 hactive = info->var.xres; 130 hblankstart = hactive; 131 hsyncstart = hblankstart + info->var.right_margin; 132 hsyncend = hsyncstart + info->var.hsync_len; 133 hblankend = hsyncend + info->var.left_margin; 134 htotal = hblankend; 135 136 vactive = info->var.yres; 137 vblankstart = vactive; 138 vsyncstart = vblankstart + info->var.lower_margin; 139 vsyncend = vsyncstart + info->var.vsync_len; 140 vblankend = vsyncend + info->var.upper_margin; 141 vtotal = vblankend; 142 143 write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) | 144 ((htotal - 1) << 16)); 145 write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) | 146 ((hblankend - 1) << 16)); 147 write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1) | 148 ((hsyncend - 1) << 16)); 149 150 write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) | 151 ((vtotal - 1) << 16)); 152 write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) | 153 ((vblankend - 1) << 16)); 154 write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1) | 155 ((vsyncend - 1) << 16)); 156 157 /* Write final register values. */ 158 write_dc(par, DC_DISPLAY_CFG, dcfg); 159 write_dc(par, DC_GENERAL_CFG, gcfg); 160 161 gx_configure_display(info); 162 163 /* Relock display controller registers */ 164 write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK); 165} 166 167void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno, 168 unsigned red, unsigned green, unsigned blue) 169{ 170 struct gxfb_par *par = info->par; 171 int val; 172 173 /* Hardware palette is in RGB 8-8-8 format. */ 174 val = (red << 8) & 0xff0000; 175 val |= (green) & 0x00ff00; 176 val |= (blue >> 8) & 0x0000ff; 177 178 write_dc(par, DC_PAL_ADDRESS, regno); 179 write_dc(par, DC_PAL_DATA, val); 180}