atmdev.h (10233B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* atmdev.h - ATM device driver declarations and various related items */ 3#ifndef LINUX_ATMDEV_H 4#define LINUX_ATMDEV_H 5 6 7#include <linux/wait.h> /* wait_queue_head_t */ 8#include <linux/time.h> /* struct timeval */ 9#include <linux/net.h> 10#include <linux/bug.h> 11#include <linux/skbuff.h> /* struct sk_buff */ 12#include <linux/uio.h> 13#include <net/sock.h> 14#include <linux/atomic.h> 15#include <linux/refcount.h> 16#include <uapi/linux/atmdev.h> 17 18#ifdef CONFIG_PROC_FS 19#include <linux/proc_fs.h> 20 21extern struct proc_dir_entry *atm_proc_root; 22#endif 23 24#ifdef CONFIG_COMPAT 25#include <linux/compat.h> 26struct compat_atm_iobuf { 27 int length; 28 compat_uptr_t buffer; 29}; 30#endif 31 32struct k_atm_aal_stats { 33#define __HANDLE_ITEM(i) atomic_t i 34 __AAL_STAT_ITEMS 35#undef __HANDLE_ITEM 36}; 37 38 39struct k_atm_dev_stats { 40 struct k_atm_aal_stats aal0; 41 struct k_atm_aal_stats aal34; 42 struct k_atm_aal_stats aal5; 43}; 44 45struct device; 46 47enum { 48 ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared 49 by device driver. */ 50 ATM_VF_READY, /* VC is ready to transfer data. Set by device 51 driver, cleared by anybody. */ 52 ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC 53 setup), controlled by socket layer */ 54 ATM_VF_REGIS, /* registered with demon, controlled by SVC 55 socket layer */ 56 ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket 57 layer */ 58 ATM_VF_RELEASED, /* demon has indicated/requested release, 59 controlled by SVC socket layer */ 60 ATM_VF_HASQOS, /* QOS parameters have been set */ 61 ATM_VF_LISTEN, /* socket is used for listening */ 62 ATM_VF_META, /* SVC socket isn't used for normal data 63 traffic and doesn't depend on signaling 64 to be available */ 65 ATM_VF_SESSION, /* VCC is p2mp session control descriptor */ 66 ATM_VF_HASSAP, /* SAP has been set */ 67 ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/ 68 ATM_VF_WAITING, /* waiting for reply from sigd */ 69 ATM_VF_IS_CLIP, /* in use by CLIP protocol */ 70}; 71 72 73#define ATM_VF2VS(flags) \ 74 (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \ 75 test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \ 76 test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \ 77 test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \ 78 test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE) 79 80 81enum { 82 ATM_DF_REMOVED, /* device was removed from atm_devs list */ 83}; 84 85 86#define ATM_PHY_SIG_LOST 0 /* no carrier/light */ 87#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */ 88#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */ 89 90#define ATM_ATMOPT_CLP 1 /* set CLP bit */ 91 92struct atm_vcc { 93 /* struct sock has to be the first member of atm_vcc */ 94 struct sock sk; 95 unsigned long flags; /* VCC flags (ATM_VF_*) */ 96 short vpi; /* VPI and VCI (types must be equal */ 97 /* with sockaddr) */ 98 int vci; 99 unsigned long aal_options; /* AAL layer options */ 100 unsigned long atm_options; /* ATM layer options */ 101 struct atm_dev *dev; /* device back pointer */ 102 struct atm_qos qos; /* QOS */ 103 struct atm_sap sap; /* SAP */ 104 void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */ 105 void (*push)(struct atm_vcc *vcc,struct sk_buff *skb); 106 void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */ 107 int (*push_oam)(struct atm_vcc *vcc,void *cell); 108 int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); 109 void *dev_data; /* per-device data */ 110 void *proto_data; /* per-protocol data */ 111 struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ 112 struct module *owner; /* owner of ->push function */ 113 /* SVC part --- may move later ------------------------------------- */ 114 short itf; /* interface number */ 115 struct sockaddr_atmsvc local; 116 struct sockaddr_atmsvc remote; 117 /* Multipoint part ------------------------------------------------- */ 118 struct atm_vcc *session; /* session VCC descriptor */ 119 /* Other stuff ----------------------------------------------------- */ 120 void *user_back; /* user backlink - not touched by */ 121 /* native ATM stack. Currently used */ 122 /* by CLIP and sch_atm. */ 123}; 124 125static inline struct atm_vcc *atm_sk(struct sock *sk) 126{ 127 return (struct atm_vcc *)sk; 128} 129 130static inline struct atm_vcc *ATM_SD(struct socket *sock) 131{ 132 return atm_sk(sock->sk); 133} 134 135static inline struct sock *sk_atm(struct atm_vcc *vcc) 136{ 137 return (struct sock *)vcc; 138} 139 140struct atm_dev_addr { 141 struct sockaddr_atmsvc addr; /* ATM address */ 142 struct list_head entry; /* next address */ 143}; 144 145enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS }; 146 147struct atm_dev { 148 const struct atmdev_ops *ops; /* device operations; NULL if unused */ 149 const struct atmphy_ops *phy; /* PHY operations, may be undefined */ 150 /* (NULL) */ 151 const char *type; /* device type name */ 152 int number; /* device index */ 153 void *dev_data; /* per-device data */ 154 void *phy_data; /* private PHY data */ 155 unsigned long flags; /* device flags (ATM_DF_*) */ 156 struct list_head local; /* local ATM addresses */ 157 struct list_head lecs; /* LECS ATM addresses learned via ILMI */ 158 unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */ 159 struct atm_cirange ci_range; /* VPI/VCI range */ 160 struct k_atm_dev_stats stats; /* statistics */ 161 char signal; /* signal status (ATM_PHY_SIG_*) */ 162 int link_rate; /* link rate (default: OC3) */ 163 refcount_t refcnt; /* reference count */ 164 spinlock_t lock; /* protect internal members */ 165#ifdef CONFIG_PROC_FS 166 struct proc_dir_entry *proc_entry; /* proc entry */ 167 char *proc_name; /* proc entry name */ 168#endif 169 struct device class_dev; /* sysfs device */ 170 struct list_head dev_list; /* linkage */ 171}; 172 173 174/* OF: send_Oam Flags */ 175 176#define ATM_OF_IMMED 1 /* Attempt immediate delivery */ 177#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */ 178 179struct atmdev_ops { /* only send is required */ 180 void (*dev_close)(struct atm_dev *dev); 181 int (*open)(struct atm_vcc *vcc); 182 void (*close)(struct atm_vcc *vcc); 183 int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg); 184#ifdef CONFIG_COMPAT 185 int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd, 186 void __user *arg); 187#endif 188 int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); 189 int (*send_bh)(struct atm_vcc *vcc, struct sk_buff *skb); 190 int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags); 191 void (*phy_put)(struct atm_dev *dev,unsigned char value, 192 unsigned long addr); 193 unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr); 194 int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags); 195 int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page); 196 struct module *owner; 197}; 198 199struct atmphy_ops { 200 int (*start)(struct atm_dev *dev); 201 int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg); 202 void (*interrupt)(struct atm_dev *dev); 203 int (*stop)(struct atm_dev *dev); 204}; 205 206struct atm_skb_data { 207 struct atm_vcc *vcc; /* ATM VCC */ 208 unsigned long atm_options; /* ATM layer options */ 209 unsigned int acct_truesize; /* truesize accounted to vcc */ 210} __packed; 211 212#define VCC_HTABLE_SIZE 32 213 214extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE]; 215extern rwlock_t vcc_sklist_lock; 216 217#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb)) 218 219struct atm_dev *atm_dev_register(const char *type, struct device *parent, 220 const struct atmdev_ops *ops, 221 int number, /* -1 == pick first available */ 222 unsigned long *flags); 223struct atm_dev *atm_dev_lookup(int number); 224void atm_dev_deregister(struct atm_dev *dev); 225 226/* atm_dev_signal_change 227 * 228 * Propagate lower layer signal change in atm_dev->signal to netdevice. 229 * The event will be sent via a notifier call chain. 230 */ 231void atm_dev_signal_change(struct atm_dev *dev, char signal); 232 233void vcc_insert_socket(struct sock *sk); 234 235void atm_dev_release_vccs(struct atm_dev *dev); 236 237static inline void atm_account_tx(struct atm_vcc *vcc, struct sk_buff *skb) 238{ 239 /* 240 * Because ATM skbs may not belong to a sock (and we don't 241 * necessarily want to), skb->truesize may be adjusted, 242 * escaping the hack in pskb_expand_head() which avoids 243 * doing so for some cases. So stash the value of truesize 244 * at the time we accounted it, and atm_pop_raw() can use 245 * that value later, in case it changes. 246 */ 247 refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); 248 ATM_SKB(skb)->acct_truesize = skb->truesize; 249 ATM_SKB(skb)->atm_options = vcc->atm_options; 250} 251 252static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) 253{ 254 atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc); 255} 256 257 258static inline void atm_return(struct atm_vcc *vcc,int truesize) 259{ 260 atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc); 261} 262 263 264static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size) 265{ 266 return (size + refcount_read(&sk_atm(vcc)->sk_wmem_alloc)) < 267 sk_atm(vcc)->sk_sndbuf; 268} 269 270 271static inline void atm_dev_hold(struct atm_dev *dev) 272{ 273 refcount_inc(&dev->refcnt); 274} 275 276 277static inline void atm_dev_put(struct atm_dev *dev) 278{ 279 if (refcount_dec_and_test(&dev->refcnt)) { 280 BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags)); 281 if (dev->ops->dev_close) 282 dev->ops->dev_close(dev); 283 put_device(&dev->class_dev); 284 } 285} 286 287 288int atm_charge(struct atm_vcc *vcc,int truesize); 289struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, 290 gfp_t gfp_flags); 291int atm_pcr_goal(const struct atm_trafprm *tp); 292 293void vcc_release_async(struct atm_vcc *vcc, int reply); 294 295struct atm_ioctl { 296 struct module *owner; 297 /* A module reference is kept if appropriate over this call. 298 * Return -ENOIOCTLCMD if you don't handle it. */ 299 int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg); 300 struct list_head list; 301}; 302 303/** 304 * register_atm_ioctl - register handler for ioctl operations 305 * 306 * Special (non-device) handlers of ioctl's should 307 * register here. If you're a normal device, you should 308 * set .ioctl in your atmdev_ops instead. 309 */ 310void register_atm_ioctl(struct atm_ioctl *); 311 312/** 313 * deregister_atm_ioctl - remove the ioctl handler 314 */ 315void deregister_atm_ioctl(struct atm_ioctl *); 316 317 318/* register_atmdevice_notifier - register atm_dev notify events 319 * 320 * Clients like br2684 will register notify events 321 * Currently we notify of signal found/lost 322 */ 323int register_atmdevice_notifier(struct notifier_block *nb); 324void unregister_atmdevice_notifier(struct notifier_block *nb); 325 326#endif