pm.h (2717B)
1/* SPDX-License-Identifier: GPL-2.0+ */ 2/* 3 * Copyright (C) 2016 Freescale Semiconductor, Inc. 4 * Copyright 2017-2018 NXP 5 * 6 * Header file containing the public API for the System Controller (SC) 7 * Power Management (PM) function. This includes functions for power state 8 * control, clock control, reset control, and wake-up event control. 9 * 10 * PM_SVC (SVC) Power Management Service 11 * 12 * Module for the Power Management (PM) service. 13 */ 14 15#ifndef _SC_PM_API_H 16#define _SC_PM_API_H 17 18#include <linux/firmware/imx/sci.h> 19 20/* 21 * This type is used to indicate RPC PM function calls. 22 */ 23enum imx_sc_pm_func { 24 IMX_SC_PM_FUNC_UNKNOWN = 0, 25 IMX_SC_PM_FUNC_SET_SYS_POWER_MODE = 19, 26 IMX_SC_PM_FUNC_SET_PARTITION_POWER_MODE = 1, 27 IMX_SC_PM_FUNC_GET_SYS_POWER_MODE = 2, 28 IMX_SC_PM_FUNC_SET_RESOURCE_POWER_MODE = 3, 29 IMX_SC_PM_FUNC_GET_RESOURCE_POWER_MODE = 4, 30 IMX_SC_PM_FUNC_REQ_LOW_POWER_MODE = 16, 31 IMX_SC_PM_FUNC_SET_CPU_RESUME_ADDR = 17, 32 IMX_SC_PM_FUNC_REQ_SYS_IF_POWER_MODE = 18, 33 IMX_SC_PM_FUNC_SET_CLOCK_RATE = 5, 34 IMX_SC_PM_FUNC_GET_CLOCK_RATE = 6, 35 IMX_SC_PM_FUNC_CLOCK_ENABLE = 7, 36 IMX_SC_PM_FUNC_SET_CLOCK_PARENT = 14, 37 IMX_SC_PM_FUNC_GET_CLOCK_PARENT = 15, 38 IMX_SC_PM_FUNC_RESET = 13, 39 IMX_SC_PM_FUNC_RESET_REASON = 10, 40 IMX_SC_PM_FUNC_BOOT = 8, 41 IMX_SC_PM_FUNC_REBOOT = 9, 42 IMX_SC_PM_FUNC_REBOOT_PARTITION = 12, 43 IMX_SC_PM_FUNC_CPU_START = 11, 44}; 45 46/* 47 * Defines for ALL parameters 48 */ 49#define IMX_SC_PM_CLK_ALL UINT8_MAX /* All clocks */ 50 51/* 52 * Defines for SC PM Power Mode 53 */ 54#define IMX_SC_PM_PW_MODE_OFF 0 /* Power off */ 55#define IMX_SC_PM_PW_MODE_STBY 1 /* Power in standby */ 56#define IMX_SC_PM_PW_MODE_LP 2 /* Power in low-power */ 57#define IMX_SC_PM_PW_MODE_ON 3 /* Power on */ 58 59/* 60 * Defines for SC PM CLK 61 */ 62#define IMX_SC_PM_CLK_SLV_BUS 0 /* Slave bus clock */ 63#define IMX_SC_PM_CLK_MST_BUS 1 /* Master bus clock */ 64#define IMX_SC_PM_CLK_PER 2 /* Peripheral clock */ 65#define IMX_SC_PM_CLK_PHY 3 /* Phy clock */ 66#define IMX_SC_PM_CLK_MISC 4 /* Misc clock */ 67#define IMX_SC_PM_CLK_MISC0 0 /* Misc 0 clock */ 68#define IMX_SC_PM_CLK_MISC1 1 /* Misc 1 clock */ 69#define IMX_SC_PM_CLK_MISC2 2 /* Misc 2 clock */ 70#define IMX_SC_PM_CLK_MISC3 3 /* Misc 3 clock */ 71#define IMX_SC_PM_CLK_MISC4 4 /* Misc 4 clock */ 72#define IMX_SC_PM_CLK_CPU 2 /* CPU clock */ 73#define IMX_SC_PM_CLK_PLL 4 /* PLL */ 74#define IMX_SC_PM_CLK_BYPASS 4 /* Bypass clock */ 75 76/* 77 * Defines for SC PM CLK Parent 78 */ 79#define IMX_SC_PM_PARENT_XTAL 0 /* Parent is XTAL. */ 80#define IMX_SC_PM_PARENT_PLL0 1 /* Parent is PLL0 */ 81#define IMX_SC_PM_PARENT_PLL1 2 /* Parent is PLL1 or PLL0/2 */ 82#define IMX_SC_PM_PARENT_PLL2 3 /* Parent in PLL2 or PLL0/4 */ 83#define IMX_SC_PM_PARENT_BYPS 4 /* Parent is a bypass clock. */ 84 85#endif /* _SC_PM_API_H */