mmc.h (17428B)
1/* 2 * Header for MultiMediaCard (MMC) 3 * 4 * Copyright 2002 Hewlett-Packard Company 5 * 6 * Use consistent with the GNU GPL is permitted, 7 * provided that this copyright notice is 8 * preserved in its entirety in all copies and derived works. 9 * 10 * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, 11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS 12 * FITNESS FOR ANY PARTICULAR PURPOSE. 13 * 14 * Many thanks to Alessandro Rubini and Jonathan Corbet! 15 * 16 * Based strongly on code by: 17 * 18 * Author: Yong-iL Joh <tolkien@mizi.com> 19 * 20 * Author: Andrew Christian 21 * 15 May 2002 22 */ 23 24#ifndef LINUX_MMC_MMC_H 25#define LINUX_MMC_MMC_H 26 27#include <linux/types.h> 28 29/* Standard MMC commands (4.1) type argument response */ 30 /* class 1 */ 31#define MMC_GO_IDLE_STATE 0 /* bc */ 32#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ 33#define MMC_ALL_SEND_CID 2 /* bcr R2 */ 34#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ 35#define MMC_SET_DSR 4 /* bc [31:16] RCA */ 36#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */ 37#define MMC_SWITCH 6 /* ac [31:0] See below R1b */ 38#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ 39#define MMC_SEND_EXT_CSD 8 /* adtc R1 */ 40#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ 41#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ 42#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ 43#define MMC_STOP_TRANSMISSION 12 /* ac R1b */ 44#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ 45#define MMC_BUS_TEST_R 14 /* adtc R1 */ 46#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ 47#define MMC_BUS_TEST_W 19 /* adtc R1 */ 48#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */ 49#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */ 50 51 /* class 2 */ 52#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ 53#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ 54#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ 55#define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */ 56#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */ 57 58 /* class 3 */ 59#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ 60 61 /* class 4 */ 62#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */ 63#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */ 64#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */ 65#define MMC_PROGRAM_CID 26 /* adtc R1 */ 66#define MMC_PROGRAM_CSD 27 /* adtc R1 */ 67 68 /* class 6 */ 69#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */ 70#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */ 71#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */ 72 73 /* class 5 */ 74#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */ 75#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */ 76#define MMC_ERASE 38 /* ac R1b */ 77 78 /* class 9 */ 79#define MMC_FAST_IO 39 /* ac <Complex> R4 */ 80#define MMC_GO_IRQ_STATE 40 /* bcr R5 */ 81 82 /* class 7 */ 83#define MMC_LOCK_UNLOCK 42 /* adtc R1b */ 84 85 /* class 8 */ 86#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ 87#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ 88 89 /* class 11 */ 90#define MMC_QUE_TASK_PARAMS 44 /* ac [20:16] task id R1 */ 91#define MMC_QUE_TASK_ADDR 45 /* ac [31:0] data addr R1 */ 92#define MMC_EXECUTE_READ_TASK 46 /* adtc [20:16] task id R1 */ 93#define MMC_EXECUTE_WRITE_TASK 47 /* adtc [20:16] task id R1 */ 94#define MMC_CMDQ_TASK_MGMT 48 /* ac [20:16] task id R1b */ 95 96static inline bool mmc_op_multi(u32 opcode) 97{ 98 return opcode == MMC_WRITE_MULTIPLE_BLOCK || 99 opcode == MMC_READ_MULTIPLE_BLOCK; 100} 101 102/* 103 * MMC_SWITCH argument format: 104 * 105 * [31:26] Always 0 106 * [25:24] Access Mode 107 * [23:16] Location of target Byte in EXT_CSD 108 * [15:08] Value Byte 109 * [07:03] Always 0 110 * [02:00] Command Set 111 */ 112 113/* 114 MMC status in R1, for native mode (SPI bits are different) 115 Type 116 e : error bit 117 s : status bit 118 r : detected and set for the actual command response 119 x : detected and set during command execution. the host must poll 120 the card by sending status command in order to read these bits. 121 Clear condition 122 a : according to the card state 123 b : always related to the previous command. Reception of 124 a valid command will clear it (with a delay of one command) 125 c : clear by read 126 */ 127 128#define R1_OUT_OF_RANGE (1 << 31) /* er, c */ 129#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ 130#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ 131#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ 132#define R1_ERASE_PARAM (1 << 27) /* ex, c */ 133#define R1_WP_VIOLATION (1 << 26) /* erx, c */ 134#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ 135#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ 136#define R1_COM_CRC_ERROR (1 << 23) /* er, b */ 137#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ 138#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ 139#define R1_CC_ERROR (1 << 20) /* erx, c */ 140#define R1_ERROR (1 << 19) /* erx, c */ 141#define R1_UNDERRUN (1 << 18) /* ex, c */ 142#define R1_OVERRUN (1 << 17) /* ex, c */ 143#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ 144#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ 145#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ 146#define R1_ERASE_RESET (1 << 13) /* sr, c */ 147#define R1_STATUS(x) (x & 0xFFF9A000) 148#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ 149#define R1_READY_FOR_DATA (1 << 8) /* sx, a */ 150#define R1_SWITCH_ERROR (1 << 7) /* sx, c */ 151#define R1_EXCEPTION_EVENT (1 << 6) /* sr, a */ 152#define R1_APP_CMD (1 << 5) /* sr, c */ 153 154#define R1_STATE_IDLE 0 155#define R1_STATE_READY 1 156#define R1_STATE_IDENT 2 157#define R1_STATE_STBY 3 158#define R1_STATE_TRAN 4 159#define R1_STATE_DATA 5 160#define R1_STATE_RCV 6 161#define R1_STATE_PRG 7 162#define R1_STATE_DIS 8 163 164static inline bool mmc_ready_for_data(u32 status) 165{ 166 /* 167 * Some cards mishandle the status bits, so make sure to check both the 168 * busy indication and the card state. 169 */ 170 return status & R1_READY_FOR_DATA && 171 R1_CURRENT_STATE(status) == R1_STATE_TRAN; 172} 173 174/* 175 * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS 176 * R1 is the low order byte; R2 is the next highest byte, when present. 177 */ 178#define R1_SPI_IDLE (1 << 0) 179#define R1_SPI_ERASE_RESET (1 << 1) 180#define R1_SPI_ILLEGAL_COMMAND (1 << 2) 181#define R1_SPI_COM_CRC (1 << 3) 182#define R1_SPI_ERASE_SEQ (1 << 4) 183#define R1_SPI_ADDRESS (1 << 5) 184#define R1_SPI_PARAMETER (1 << 6) 185/* R1 bit 7 is always zero */ 186#define R2_SPI_CARD_LOCKED (1 << 8) 187#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */ 188#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP 189#define R2_SPI_ERROR (1 << 10) 190#define R2_SPI_CC_ERROR (1 << 11) 191#define R2_SPI_CARD_ECC_ERROR (1 << 12) 192#define R2_SPI_WP_VIOLATION (1 << 13) 193#define R2_SPI_ERASE_PARAM (1 << 14) 194#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */ 195#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE 196 197/* 198 * OCR bits are mostly in host.h 199 */ 200#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */ 201 202/* 203 * Card Command Classes (CCC) 204 */ 205#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */ 206 /* (CMD0,1,2,3,4,7,9,10,12,13,15) */ 207 /* (and for SPI, CMD58,59) */ 208#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */ 209 /* (CMD11) */ 210#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */ 211 /* (CMD16,17,18) */ 212#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */ 213 /* (CMD20) */ 214#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */ 215 /* (CMD16,24,25,26,27) */ 216#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */ 217 /* (CMD32,33,34,35,36,37,38,39) */ 218#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */ 219 /* (CMD28,29,30) */ 220#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */ 221 /* (CMD16,CMD42) */ 222#define CCC_APP_SPEC (1<<8) /* (8) Application specific */ 223 /* (CMD55,56,57,ACMD*) */ 224#define CCC_IO_MODE (1<<9) /* (9) I/O mode */ 225 /* (CMD5,39,40,52,53) */ 226#define CCC_SWITCH (1<<10) /* (10) High speed switch */ 227 /* (CMD6,34,35,36,37,50) */ 228 /* (11) Reserved */ 229 /* (CMD?) */ 230 231/* 232 * CSD field definitions 233 */ 234 235#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ 236#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ 237#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */ 238#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */ 239 240#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ 241#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ 242#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ 243#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */ 244#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */ 245 246/* 247 * EXT_CSD fields 248 */ 249 250#define EXT_CSD_CMDQ_MODE_EN 15 /* R/W */ 251#define EXT_CSD_FLUSH_CACHE 32 /* W */ 252#define EXT_CSD_CACHE_CTRL 33 /* R/W */ 253#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ 254#define EXT_CSD_PACKED_FAILURE_INDEX 35 /* RO */ 255#define EXT_CSD_PACKED_CMD_STATUS 36 /* RO */ 256#define EXT_CSD_EXP_EVENTS_STATUS 54 /* RO, 2 bytes */ 257#define EXT_CSD_EXP_EVENTS_CTRL 56 /* R/W, 2 bytes */ 258#define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */ 259#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ 260#define EXT_CSD_PARTITION_SETTING_COMPLETED 155 /* R/W */ 261#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ 262#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ 263#define EXT_CSD_HPI_MGMT 161 /* R/W */ 264#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ 265#define EXT_CSD_BKOPS_EN 163 /* R/W */ 266#define EXT_CSD_BKOPS_START 164 /* W */ 267#define EXT_CSD_SANITIZE_START 165 /* W */ 268#define EXT_CSD_WR_REL_PARAM 166 /* RO */ 269#define EXT_CSD_RPMB_MULT 168 /* RO */ 270#define EXT_CSD_FW_CONFIG 169 /* R/W */ 271#define EXT_CSD_BOOT_WP 173 /* R/W */ 272#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ 273#define EXT_CSD_PART_CONFIG 179 /* R/W */ 274#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ 275#define EXT_CSD_BUS_WIDTH 183 /* R/W */ 276#define EXT_CSD_STROBE_SUPPORT 184 /* RO */ 277#define EXT_CSD_HS_TIMING 185 /* R/W */ 278#define EXT_CSD_POWER_CLASS 187 /* R/W */ 279#define EXT_CSD_REV 192 /* RO */ 280#define EXT_CSD_STRUCTURE 194 /* RO */ 281#define EXT_CSD_CARD_TYPE 196 /* RO */ 282#define EXT_CSD_DRIVER_STRENGTH 197 /* RO */ 283#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */ 284#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ 285#define EXT_CSD_PWR_CL_52_195 200 /* RO */ 286#define EXT_CSD_PWR_CL_26_195 201 /* RO */ 287#define EXT_CSD_PWR_CL_52_360 202 /* RO */ 288#define EXT_CSD_PWR_CL_26_360 203 /* RO */ 289#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 290#define EXT_CSD_S_A_TIMEOUT 217 /* RO */ 291#define EXT_CSD_REL_WR_SEC_C 222 /* RO */ 292#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 293#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */ 294#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ 295#define EXT_CSD_BOOT_MULT 226 /* RO */ 296#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */ 297#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ 298#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ 299#define EXT_CSD_TRIM_MULT 232 /* RO */ 300#define EXT_CSD_PWR_CL_200_195 236 /* RO */ 301#define EXT_CSD_PWR_CL_200_360 237 /* RO */ 302#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */ 303#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ 304#define EXT_CSD_BKOPS_STATUS 246 /* RO */ 305#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ 306#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ 307#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ 308#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */ 309#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */ 310#define EXT_CSD_PRE_EOL_INFO 267 /* RO */ 311#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A 268 /* RO */ 312#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B 269 /* RO */ 313#define EXT_CSD_CMDQ_DEPTH 307 /* RO */ 314#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */ 315#define EXT_CSD_SUPPORTED_MODE 493 /* RO */ 316#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ 317#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ 318#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ 319#define EXT_CSD_MAX_PACKED_READS 501 /* RO */ 320#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ 321#define EXT_CSD_HPI_FEATURES 503 /* RO */ 322 323/* 324 * EXT_CSD field definitions 325 */ 326 327#define EXT_CSD_WR_REL_PARAM_EN (1<<2) 328#define EXT_CSD_WR_REL_PARAM_EN_RPMB_REL_WR (1<<4) 329 330#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS (0x40) 331#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS (0x10) 332#define EXT_CSD_BOOT_WP_B_PERM_WP_EN (0x04) 333#define EXT_CSD_BOOT_WP_B_PWR_WP_EN (0x01) 334 335#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) 336#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) 337#define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3) 338#define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) 339 340#define EXT_CSD_PART_SETTING_COMPLETED (0x1) 341#define EXT_CSD_PART_SUPPORT_PART_EN (0x1) 342 343#define EXT_CSD_CMD_SET_NORMAL (1<<0) 344#define EXT_CSD_CMD_SET_SECURE (1<<1) 345#define EXT_CSD_CMD_SET_CPSECURE (1<<2) 346 347#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */ 348#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */ 349#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \ 350 EXT_CSD_CARD_TYPE_HS_52) 351#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ 352 /* DDR mode @1.8V or 3V I/O */ 353#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ 354 /* DDR mode @1.2V I/O */ 355#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ 356 | EXT_CSD_CARD_TYPE_DDR_1_2V) 357#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */ 358#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */ 359 /* SDR mode @1.2V I/O */ 360#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ 361 EXT_CSD_CARD_TYPE_HS200_1_2V) 362#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */ 363#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */ 364#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ 365 EXT_CSD_CARD_TYPE_HS400_1_2V) 366#define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */ 367 368#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ 369#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ 370#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ 371#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ 372#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ 373#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */ 374 375#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ 376#define EXT_CSD_TIMING_HS 1 /* High speed */ 377#define EXT_CSD_TIMING_HS200 2 /* HS200 */ 378#define EXT_CSD_TIMING_HS400 3 /* HS400 */ 379#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */ 380 381#define EXT_CSD_SEC_ER_EN BIT(0) 382#define EXT_CSD_SEC_BD_BLK_EN BIT(2) 383#define EXT_CSD_SEC_GB_CL_EN BIT(4) 384#define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */ 385 386#define EXT_CSD_RST_N_EN_MASK 0x3 387#define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ 388 389#define EXT_CSD_NO_POWER_NOTIFICATION 0 390#define EXT_CSD_POWER_ON 1 391#define EXT_CSD_POWER_OFF_SHORT 2 392#define EXT_CSD_POWER_OFF_LONG 3 393 394#define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */ 395#define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */ 396#define EXT_CSD_PWR_CL_8BIT_SHIFT 4 397#define EXT_CSD_PWR_CL_4BIT_SHIFT 0 398 399#define EXT_CSD_PACKED_EVENT_EN BIT(3) 400 401/* 402 * EXCEPTION_EVENT_STATUS field 403 */ 404#define EXT_CSD_URGENT_BKOPS BIT(0) 405#define EXT_CSD_DYNCAP_NEEDED BIT(1) 406#define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2) 407#define EXT_CSD_PACKED_FAILURE BIT(3) 408 409#define EXT_CSD_PACKED_GENERIC_ERROR BIT(0) 410#define EXT_CSD_PACKED_INDEXED_ERROR BIT(1) 411 412/* 413 * BKOPS status level 414 */ 415#define EXT_CSD_BKOPS_LEVEL_2 0x2 416 417/* 418 * BKOPS modes 419 */ 420#define EXT_CSD_MANUAL_BKOPS_MASK 0x01 421#define EXT_CSD_AUTO_BKOPS_MASK 0x02 422 423/* 424 * Command Queue 425 */ 426#define EXT_CSD_CMDQ_MODE_ENABLED BIT(0) 427#define EXT_CSD_CMDQ_DEPTH_MASK GENMASK(4, 0) 428#define EXT_CSD_CMDQ_SUPPORTED BIT(0) 429 430/* 431 * MMC_SWITCH access modes 432 */ 433#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ 434#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */ 435#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */ 436#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ 437 438/* 439 * Erase/trim/discard 440 */ 441#define MMC_ERASE_ARG 0x00000000 442#define MMC_SECURE_ERASE_ARG 0x80000000 443#define MMC_TRIM_ARG 0x00000001 444#define MMC_DISCARD_ARG 0x00000003 445#define MMC_SECURE_TRIM1_ARG 0x80000001 446#define MMC_SECURE_TRIM2_ARG 0x80008000 447#define MMC_SECURE_ARGS 0x80000000 448#define MMC_TRIM_ARGS 0x00008001 449 450#define mmc_driver_type_mask(n) (1 << (n)) 451 452#endif /* LINUX_MMC_MMC_H */