cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sd.h (2786B)

      1/* SPDX-License-Identifier: GPL-2.0-or-later */
      2/*
      3 *  include/linux/mmc/sd.h
      4 *
      5 *  Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
      6 */
      7
      8#ifndef LINUX_MMC_SD_H
      9#define LINUX_MMC_SD_H
     10
     11/* SD commands                           type  argument     response */
     12  /* class 0 */
     13/* This is basically the same command as for MMC with some quirks. */
     14#define SD_SEND_RELATIVE_ADDR     3   /* bcr                     R6  */
     15#define SD_SEND_IF_COND           8   /* bcr  [11:0] See below   R7  */
     16#define SD_SWITCH_VOLTAGE         11  /* ac                      R1  */
     17
     18  /* class 10 */
     19#define SD_SWITCH                 6   /* adtc [31:0] See below   R1  */
     20
     21  /* class 5 */
     22#define SD_ERASE_WR_BLK_START    32   /* ac   [31:0] data addr   R1  */
     23#define SD_ERASE_WR_BLK_END      33   /* ac   [31:0] data addr   R1  */
     24
     25  /* Application commands */
     26#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
     27#define SD_APP_SD_STATUS         13   /* adtc                    R1  */
     28#define SD_APP_SEND_NUM_WR_BLKS  22   /* adtc                    R1  */
     29#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
     30#define SD_APP_SEND_SCR          51   /* adtc                    R1  */
     31
     32  /* class 11 */
     33#define SD_READ_EXTR_SINGLE      48   /* adtc [31:0]             R1  */
     34#define SD_WRITE_EXTR_SINGLE     49   /* adtc [31:0]             R1  */
     35
     36/* OCR bit definitions */
     37#define SD_OCR_S18R		(1 << 24)    /* 1.8V switching request */
     38#define SD_ROCR_S18A		SD_OCR_S18R  /* 1.8V switching accepted by card */
     39#define SD_OCR_XPC		(1 << 28)    /* SDXC power control */
     40#define SD_OCR_CCS		(1 << 30)    /* Card Capacity Status */
     41
     42/*
     43 * SD_SWITCH argument format:
     44 *
     45 *      [31] Check (0) or switch (1)
     46 *      [30:24] Reserved (0)
     47 *      [23:20] Function group 6
     48 *      [19:16] Function group 5
     49 *      [15:12] Function group 4
     50 *      [11:8] Function group 3
     51 *      [7:4] Function group 2
     52 *      [3:0] Function group 1
     53 */
     54
     55/*
     56 * SD_SEND_IF_COND argument format:
     57 *
     58 *	[31:12] Reserved (0)
     59 *	[11:8] Host Voltage Supply Flags
     60 *	[7:0] Check Pattern (0xAA)
     61 */
     62
     63/*
     64 * SCR field definitions
     65 */
     66
     67#define SCR_SPEC_VER_0		0	/* Implements system specification 1.0 - 1.01 */
     68#define SCR_SPEC_VER_1		1	/* Implements system specification 1.10 */
     69#define SCR_SPEC_VER_2		2	/* Implements system specification 2.00-3.0X */
     70
     71/*
     72 * SD bus widths
     73 */
     74#define SD_BUS_WIDTH_1		0
     75#define SD_BUS_WIDTH_4		2
     76
     77/*
     78 * SD_SWITCH mode
     79 */
     80#define SD_SWITCH_CHECK		0
     81#define SD_SWITCH_SET		1
     82
     83/*
     84 * SD_SWITCH function groups
     85 */
     86#define SD_SWITCH_GRP_ACCESS	0
     87
     88/*
     89 * SD_SWITCH access modes
     90 */
     91#define SD_SWITCH_ACCESS_DEF	0
     92#define SD_SWITCH_ACCESS_HS	1
     93
     94/*
     95 * Erase/discard
     96 */
     97#define SD_ERASE_ARG			0x00000000
     98#define SD_DISCARD_ARG			0x00000001
     99
    100#endif /* LINUX_MMC_SD_H */