ds1305.h (1107B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2#ifndef __LINUX_SPI_DS1305_H 3#define __LINUX_SPI_DS1305_H 4 5/* 6 * One-time configuration for ds1305 and ds1306 RTC chips. 7 * 8 * Put a pointer to this in spi_board_info.platform_data if you want to 9 * be sure that Linux (re)initializes this as needed ... after losing 10 * backup power, and potentially on the first boot. 11 */ 12struct ds1305_platform_data { 13 14 /* Trickle charge configuration: it's OK to leave out the MAGIC 15 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K. 16 */ 17#define DS1305_TRICKLE_MAGIC 0xa0 18#define DS1305_TRICKLE_DS2 0x08 /* two diodes */ 19#define DS1305_TRICKLE_DS1 0x04 /* one diode */ 20#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */ 21#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */ 22#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */ 23 u8 trickle; 24 25 /* set only on ds1306 parts */ 26 bool is_ds1306; 27 28 /* ds1306 only: enable 1 Hz output */ 29 bool en_1hz; 30 31 /* REVISIT: the driver currently expects nINT0 to be wired 32 * as the alarm IRQ. ALM1 may also need to be set up ... 33 */ 34}; 35 36#endif /* __LINUX_SPI_DS1305_H */