wwan.h (5557B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* Copyright (c) 2021, Linaro Ltd <loic.poulain@linaro.org> */ 3 4#ifndef __WWAN_H 5#define __WWAN_H 6 7#include <linux/poll.h> 8#include <linux/netdevice.h> 9#include <linux/types.h> 10 11/** 12 * enum wwan_port_type - WWAN port types 13 * @WWAN_PORT_AT: AT commands 14 * @WWAN_PORT_MBIM: Mobile Broadband Interface Model control 15 * @WWAN_PORT_QMI: Qcom modem/MSM interface for modem control 16 * @WWAN_PORT_QCDM: Qcom Modem diagnostic interface 17 * @WWAN_PORT_FIREHOSE: XML based command protocol 18 * 19 * @WWAN_PORT_MAX: Highest supported port types 20 * @WWAN_PORT_UNKNOWN: Special value to indicate an unknown port type 21 * @__WWAN_PORT_MAX: Internal use 22 */ 23enum wwan_port_type { 24 WWAN_PORT_AT, 25 WWAN_PORT_MBIM, 26 WWAN_PORT_QMI, 27 WWAN_PORT_QCDM, 28 WWAN_PORT_FIREHOSE, 29 30 /* Add new port types above this line */ 31 32 __WWAN_PORT_MAX, 33 WWAN_PORT_MAX = __WWAN_PORT_MAX - 1, 34 WWAN_PORT_UNKNOWN, 35}; 36 37struct device; 38struct file; 39struct netlink_ext_ack; 40struct sk_buff; 41struct wwan_port; 42 43/** struct wwan_port_ops - The WWAN port operations 44 * @start: The routine for starting the WWAN port device. 45 * @stop: The routine for stopping the WWAN port device. 46 * @tx: Non-blocking routine that sends WWAN port protocol data to the device. 47 * @tx_blocking: Optional blocking routine that sends WWAN port protocol data 48 * to the device. 49 * @tx_poll: Optional routine that sets additional TX poll flags. 50 * 51 * The wwan_port_ops structure contains a list of low-level operations 52 * that control a WWAN port device. All functions are mandatory unless specified. 53 */ 54struct wwan_port_ops { 55 int (*start)(struct wwan_port *port); 56 void (*stop)(struct wwan_port *port); 57 int (*tx)(struct wwan_port *port, struct sk_buff *skb); 58 59 /* Optional operations */ 60 int (*tx_blocking)(struct wwan_port *port, struct sk_buff *skb); 61 __poll_t (*tx_poll)(struct wwan_port *port, struct file *filp, 62 poll_table *wait); 63}; 64 65/** 66 * wwan_create_port - Add a new WWAN port 67 * @parent: Device to use as parent and shared by all WWAN ports 68 * @type: WWAN port type 69 * @ops: WWAN port operations 70 * @drvdata: Pointer to caller driver data 71 * 72 * Allocate and register a new WWAN port. The port will be automatically exposed 73 * to user as a character device and attached to the right virtual WWAN device, 74 * based on the parent pointer. The parent pointer is the device shared by all 75 * components of a same WWAN modem (e.g. USB dev, PCI dev, MHI controller...). 76 * 77 * drvdata will be placed in the WWAN port device driver data and can be 78 * retrieved with wwan_port_get_drvdata(). 79 * 80 * This function must be balanced with a call to wwan_remove_port(). 81 * 82 * Returns a valid pointer to wwan_port on success or PTR_ERR on failure 83 */ 84struct wwan_port *wwan_create_port(struct device *parent, 85 enum wwan_port_type type, 86 const struct wwan_port_ops *ops, 87 void *drvdata); 88 89/** 90 * wwan_remove_port - Remove a WWAN port 91 * @port: WWAN port to remove 92 * 93 * Remove a previously created port. 94 */ 95void wwan_remove_port(struct wwan_port *port); 96 97/** 98 * wwan_port_rx - Receive data from the WWAN port 99 * @port: WWAN port for which data is received 100 * @skb: Pointer to the rx buffer 101 * 102 * A port driver calls this function upon data reception (MBIM, AT...). 103 */ 104void wwan_port_rx(struct wwan_port *port, struct sk_buff *skb); 105 106/** 107 * wwan_port_txoff - Stop TX on WWAN port 108 * @port: WWAN port for which TX must be stopped 109 * 110 * Used for TX flow control, a port driver calls this function to indicate TX 111 * is temporary unavailable (e.g. due to ring buffer fullness). 112 */ 113void wwan_port_txoff(struct wwan_port *port); 114 115 116/** 117 * wwan_port_txon - Restart TX on WWAN port 118 * @port: WWAN port for which TX must be restarted 119 * 120 * Used for TX flow control, a port driver calls this function to indicate TX 121 * is available again. 122 */ 123void wwan_port_txon(struct wwan_port *port); 124 125/** 126 * wwan_port_get_drvdata - Retrieve driver data from a WWAN port 127 * @port: Related WWAN port 128 */ 129void *wwan_port_get_drvdata(struct wwan_port *port); 130 131/** 132 * struct wwan_netdev_priv - WWAN core network device private data 133 * @link_id: WWAN device data link id 134 * @drv_priv: driver private data area, size is determined in &wwan_ops 135 */ 136struct wwan_netdev_priv { 137 u32 link_id; 138 139 /* must be last */ 140 u8 drv_priv[] __aligned(sizeof(void *)); 141}; 142 143static inline void *wwan_netdev_drvpriv(struct net_device *dev) 144{ 145 return ((struct wwan_netdev_priv *)netdev_priv(dev))->drv_priv; 146} 147 148/* 149 * Used to indicate that the WWAN core should not create a default network 150 * link. 151 */ 152#define WWAN_NO_DEFAULT_LINK U32_MAX 153 154/** 155 * struct wwan_ops - WWAN device ops 156 * @priv_size: size of private netdev data area 157 * @setup: set up a new netdev 158 * @newlink: register the new netdev 159 * @dellink: remove the given netdev 160 */ 161struct wwan_ops { 162 unsigned int priv_size; 163 void (*setup)(struct net_device *dev); 164 int (*newlink)(void *ctxt, struct net_device *dev, 165 u32 if_id, struct netlink_ext_ack *extack); 166 void (*dellink)(void *ctxt, struct net_device *dev, 167 struct list_head *head); 168}; 169 170int wwan_register_ops(struct device *parent, const struct wwan_ops *ops, 171 void *ctxt, u32 def_link_id); 172 173void wwan_unregister_ops(struct device *parent); 174 175#ifdef CONFIG_WWAN_DEBUGFS 176struct dentry *wwan_get_debugfs_dir(struct device *parent); 177void wwan_put_debugfs_dir(struct dentry *dir); 178#else 179static inline struct dentry *wwan_get_debugfs_dir(struct device *parent) 180{ 181 return ERR_PTR(-ENODEV); 182} 183static inline void wwan_put_debugfs_dir(struct dentry *dir) {} 184#endif 185 186#endif /* __WWAN_H */