saa7115.h (4133B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags 4 5 Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) 6 7*/ 8 9#ifndef _SAA7115_H_ 10#define _SAA7115_H_ 11 12/* s_routing inputs, outputs, and config */ 13 14/* SAA7111/3/4/5 HW inputs */ 15#define SAA7115_COMPOSITE0 0 16#define SAA7115_COMPOSITE1 1 17#define SAA7115_COMPOSITE2 2 18#define SAA7115_COMPOSITE3 3 19#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ 20#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ 21#define SAA7115_SVIDEO0 6 22#define SAA7115_SVIDEO1 7 23#define SAA7115_SVIDEO2 8 24#define SAA7115_SVIDEO3 9 25 26/* outputs */ 27#define SAA7115_IPORT_ON 1 28#define SAA7115_IPORT_OFF 0 29 30/* SAA7111 specific outputs. */ 31#define SAA7111_VBI_BYPASS 2 32#define SAA7111_FMT_YUV422 0x00 33#define SAA7111_FMT_RGB 0x40 34#define SAA7111_FMT_CCIR 0x80 35#define SAA7111_FMT_YUV411 0xc0 36 37/* config flags */ 38/* 39 * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit 40 * controls the IDQ signal polarity which is set to 'inverted' if the bit 41 * it 1 and to 'default' if it is 0. 42 */ 43#define SAA7115_IDQ_IS_DEFAULT (1 << 0) 44 45/* s_crystal_freq values and flags */ 46 47/* SAA7115 v4l2_crystal_freq frequency values */ 48#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ 49#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ 50 51/* SAA7115 v4l2_crystal_freq audio clock control flags */ 52#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ 53#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ 54#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ 55#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ 56 57/* ===== SAA7113 Config enums ===== */ 58 59/* Register 0x08 "Horizontal time constant" [Bit 3..4]: 60 * Should be set to "Fast Locking Mode" according to the datasheet, 61 * and that is the default setting in the gm7113c_init table. 62 * saa7113_init sets this value to "VTR Mode". */ 63enum saa7113_r08_htc { 64 SAA7113_HTC_TV_MODE = 0x00, 65 SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ 66 SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ 67}; 68 69/* Register 0x10 "Output format selection" [Bit 6..7]: 70 * Defaults to ITU_656 as specified in datasheet. */ 71enum saa7113_r10_ofts { 72 SAA7113_OFTS_ITU_656 = 0x0, /* Default */ 73 SAA7113_OFTS_VFLAG_BY_VREF, 74 SAA7113_OFTS_VFLAG_BY_DATA_TYPE 75}; 76 77/* 78 * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: 79 * This is used to select what data is output on the RTS0 and RTS1 pins. 80 * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) 81 * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified 82 * in the datasheet, but is set to HREF_HS in the saa7113_init table. 83 */ 84enum saa7113_r12_rts { 85 SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ 86 SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ 87 SAA7113_RTS_GPSW, 88 SAA7115_RTS_HL, 89 SAA7113_RTS_VL, 90 SAA7113_RTS_DL, 91 SAA7113_RTS_PLIN, 92 SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ 93 SAA7113_RTS_HS, 94 SAA7113_RTS_HQ, 95 SAA7113_RTS_ODD, 96 SAA7113_RTS_VS, 97 SAA7113_RTS_V123, 98 SAA7113_RTS_VGATE, 99 SAA7113_RTS_VREF, 100 SAA7113_RTS_FID 101}; 102 103/** 104 * struct saa7115_platform_data - Allow overriding default initialization 105 * 106 * @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table 107 * instead of saa7113_init table 108 * (saa7113 only) 109 * @saa7113_r08_htc: [R_08 - Bit 3..4] 110 * @saa7113_r10_vrln: [R_10 - Bit 3] 111 * default: Disabled for gm7113c_init 112 * Enabled for saa7113c_init 113 * @saa7113_r10_ofts: [R_10 - Bit 6..7] 114 * @saa7113_r12_rts0: [R_12 - Bit 0..3] 115 * @saa7113_r12_rts1: [R_12 - Bit 4..7] 116 * @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled 117 */ 118struct saa7115_platform_data { 119 bool saa7113_force_gm7113c_init; 120 enum saa7113_r08_htc *saa7113_r08_htc; 121 bool *saa7113_r10_vrln; 122 enum saa7113_r10_ofts *saa7113_r10_ofts; 123 enum saa7113_r12_rts *saa7113_r12_rts0; 124 enum saa7113_r12_rts *saa7113_r12_rts1; 125 bool *saa7113_r13_adlsb; 126}; 127 128#endif