cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rdmavt_qp.h (28687B)


      1/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
      2/*
      3 * Copyright(c) 2016 - 2020 Intel Corporation.
      4 */
      5
      6#ifndef DEF_RDMAVT_INCQP_H
      7#define DEF_RDMAVT_INCQP_H
      8
      9#include <rdma/rdma_vt.h>
     10#include <rdma/ib_pack.h>
     11#include <rdma/ib_verbs.h>
     12#include <rdma/rdmavt_cq.h>
     13#include <rdma/rvt-abi.h>
     14/*
     15 * Atomic bit definitions for r_aflags.
     16 */
     17#define RVT_R_WRID_VALID        0
     18#define RVT_R_REWIND_SGE        1
     19
     20/*
     21 * Bit definitions for r_flags.
     22 */
     23#define RVT_R_REUSE_SGE 0x01
     24#define RVT_R_RDMAR_SEQ 0x02
     25#define RVT_R_RSP_NAK   0x04
     26#define RVT_R_RSP_SEND  0x08
     27#define RVT_R_COMM_EST  0x10
     28
     29/*
     30 * If a packet's QP[23:16] bits match this value, then it is
     31 * a PSM packet and the hardware will expect a KDETH header
     32 * following the BTH.
     33 */
     34#define RVT_KDETH_QP_PREFIX       0x80
     35#define RVT_KDETH_QP_SUFFIX       0xffff
     36#define RVT_KDETH_QP_PREFIX_MASK  0x00ff0000
     37#define RVT_KDETH_QP_PREFIX_SHIFT 16
     38#define RVT_KDETH_QP_BASE         (u32)(RVT_KDETH_QP_PREFIX << \
     39					RVT_KDETH_QP_PREFIX_SHIFT)
     40#define RVT_KDETH_QP_MAX          (u32)(RVT_KDETH_QP_BASE + RVT_KDETH_QP_SUFFIX)
     41
     42/*
     43 * If a packet's LNH == BTH and DEST QPN[23:16] in the BTH match this
     44 * prefix value, then it is an AIP packet with a DETH containing the entropy
     45 * value in byte 4 following the BTH.
     46 */
     47#define RVT_AIP_QP_PREFIX       0x81
     48#define RVT_AIP_QP_SUFFIX       0xffff
     49#define RVT_AIP_QP_PREFIX_MASK  0x00ff0000
     50#define RVT_AIP_QP_PREFIX_SHIFT 16
     51#define RVT_AIP_QP_BASE         (u32)(RVT_AIP_QP_PREFIX << \
     52				      RVT_AIP_QP_PREFIX_SHIFT)
     53#define RVT_AIP_QPN_MAX         BIT(RVT_AIP_QP_PREFIX_SHIFT)
     54#define RVT_AIP_QP_MAX          (u32)(RVT_AIP_QP_BASE + RVT_AIP_QPN_MAX - 1)
     55
     56/*
     57 * Bit definitions for s_flags.
     58 *
     59 * RVT_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled
     60 * RVT_S_BUSY - send tasklet is processing the QP
     61 * RVT_S_TIMER - the RC retry timer is active
     62 * RVT_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics
     63 * RVT_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs
     64 *                         before processing the next SWQE
     65 * RVT_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete
     66 *                         before processing the next SWQE
     67 * RVT_S_WAIT_RNR - waiting for RNR timeout
     68 * RVT_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
     69 * RVT_S_WAIT_DMA - waiting for send DMA queue to drain before generating
     70 *                  next send completion entry not via send DMA
     71 * RVT_S_WAIT_PIO - waiting for a send buffer to be available
     72 * RVT_S_WAIT_TX - waiting for a struct verbs_txreq to be available
     73 * RVT_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available
     74 * RVT_S_WAIT_KMEM - waiting for kernel memory to be available
     75 * RVT_S_WAIT_PSN - waiting for a packet to exit the send DMA queue
     76 * RVT_S_WAIT_ACK - waiting for an ACK packet before sending more requests
     77 * RVT_S_SEND_ONE - send one packet, request ACK, then wait for ACK
     78 * RVT_S_ECN - a BECN was queued to the send engine
     79 * RVT_S_MAX_BIT_MASK - The max bit that can be used by rdmavt
     80 */
     81#define RVT_S_SIGNAL_REQ_WR	0x0001
     82#define RVT_S_BUSY		0x0002
     83#define RVT_S_TIMER		0x0004
     84#define RVT_S_RESP_PENDING	0x0008
     85#define RVT_S_ACK_PENDING	0x0010
     86#define RVT_S_WAIT_FENCE	0x0020
     87#define RVT_S_WAIT_RDMAR	0x0040
     88#define RVT_S_WAIT_RNR		0x0080
     89#define RVT_S_WAIT_SSN_CREDIT	0x0100
     90#define RVT_S_WAIT_DMA		0x0200
     91#define RVT_S_WAIT_PIO		0x0400
     92#define RVT_S_WAIT_TX		0x0800
     93#define RVT_S_WAIT_DMA_DESC	0x1000
     94#define RVT_S_WAIT_KMEM		0x2000
     95#define RVT_S_WAIT_PSN		0x4000
     96#define RVT_S_WAIT_ACK		0x8000
     97#define RVT_S_SEND_ONE		0x10000
     98#define RVT_S_UNLIMITED_CREDIT	0x20000
     99#define RVT_S_ECN		0x40000
    100#define RVT_S_MAX_BIT_MASK	0x800000
    101
    102/*
    103 * Drivers should use s_flags starting with bit 31 down to the bit next to
    104 * RVT_S_MAX_BIT_MASK
    105 */
    106
    107/*
    108 * Wait flags that would prevent any packet type from being sent.
    109 */
    110#define RVT_S_ANY_WAIT_IO \
    111	(RVT_S_WAIT_PIO | RVT_S_WAIT_TX | \
    112	 RVT_S_WAIT_DMA_DESC | RVT_S_WAIT_KMEM)
    113
    114/*
    115 * Wait flags that would prevent send work requests from making progress.
    116 */
    117#define RVT_S_ANY_WAIT_SEND (RVT_S_WAIT_FENCE | RVT_S_WAIT_RDMAR | \
    118	RVT_S_WAIT_RNR | RVT_S_WAIT_SSN_CREDIT | RVT_S_WAIT_DMA | \
    119	RVT_S_WAIT_PSN | RVT_S_WAIT_ACK)
    120
    121#define RVT_S_ANY_WAIT (RVT_S_ANY_WAIT_IO | RVT_S_ANY_WAIT_SEND)
    122
    123/* Number of bits to pay attention to in the opcode for checking qp type */
    124#define RVT_OPCODE_QP_MASK 0xE0
    125
    126/* Flags for checking QP state (see ib_rvt_state_ops[]) */
    127#define RVT_POST_SEND_OK                0x01
    128#define RVT_POST_RECV_OK                0x02
    129#define RVT_PROCESS_RECV_OK             0x04
    130#define RVT_PROCESS_SEND_OK             0x08
    131#define RVT_PROCESS_NEXT_SEND_OK        0x10
    132#define RVT_FLUSH_SEND			0x20
    133#define RVT_FLUSH_RECV			0x40
    134#define RVT_PROCESS_OR_FLUSH_SEND \
    135	(RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND)
    136#define RVT_SEND_OR_FLUSH_OR_RECV_OK \
    137	(RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND | RVT_PROCESS_RECV_OK)
    138
    139/*
    140 * Internal send flags
    141 */
    142#define RVT_SEND_RESERVE_USED           IB_SEND_RESERVED_START
    143#define RVT_SEND_COMPLETION_ONLY	(IB_SEND_RESERVED_START << 1)
    144
    145/**
    146 * rvt_ud_wr - IB UD work plus AH cache
    147 * @wr: valid IB work request
    148 * @attr: pointer to an allocated AH attribute
    149 *
    150 * Special case the UD WR so we can keep track of the AH attributes.
    151 *
    152 * NOTE: This data structure is stricly ordered wr then attr. I.e the attr
    153 * MUST come after wr.  The ib_ud_wr is sized and copied in rvt_post_one_wr.
    154 * The copy assumes that wr is first.
    155 */
    156struct rvt_ud_wr {
    157	struct ib_ud_wr wr;
    158	struct rdma_ah_attr *attr;
    159};
    160
    161/*
    162 * Send work request queue entry.
    163 * The size of the sg_list is determined when the QP is created and stored
    164 * in qp->s_max_sge.
    165 */
    166struct rvt_swqe {
    167	union {
    168		struct ib_send_wr wr;   /* don't use wr.sg_list */
    169		struct rvt_ud_wr ud_wr;
    170		struct ib_reg_wr reg_wr;
    171		struct ib_rdma_wr rdma_wr;
    172		struct ib_atomic_wr atomic_wr;
    173	};
    174	u32 psn;                /* first packet sequence number */
    175	u32 lpsn;               /* last packet sequence number */
    176	u32 ssn;                /* send sequence number */
    177	u32 length;             /* total length of data in sg_list */
    178	void *priv;             /* driver dependent field */
    179	struct rvt_sge sg_list[];
    180};
    181
    182/**
    183 * struct rvt_krwq - kernel struct receive work request
    184 * @p_lock: lock to protect producer of the kernel buffer
    185 * @head: index of next entry to fill
    186 * @c_lock:lock to protect consumer of the kernel buffer
    187 * @tail: index of next entry to pull
    188 * @count: count is aproximate of total receive enteries posted
    189 * @rvt_rwqe: struct of receive work request queue entry
    190 *
    191 * This structure is used to contain the head pointer,
    192 * tail pointer and receive work queue entries for kernel
    193 * mode user.
    194 */
    195struct rvt_krwq {
    196	spinlock_t p_lock;	/* protect producer */
    197	u32 head;               /* new work requests posted to the head */
    198
    199	/* protect consumer */
    200	spinlock_t c_lock ____cacheline_aligned_in_smp;
    201	u32 tail;               /* receives pull requests from here. */
    202	u32 count;		/* approx count of receive entries posted */
    203	struct rvt_rwqe *curr_wq;
    204	struct rvt_rwqe wq[];
    205};
    206
    207/*
    208 * rvt_get_swqe_ah - Return the pointer to the struct rvt_ah
    209 * @swqe: valid Send WQE
    210 *
    211 */
    212static inline struct rvt_ah *rvt_get_swqe_ah(struct rvt_swqe *swqe)
    213{
    214	return ibah_to_rvtah(swqe->ud_wr.wr.ah);
    215}
    216
    217/**
    218 * rvt_get_swqe_ah_attr - Return the cached ah attribute information
    219 * @swqe: valid Send WQE
    220 *
    221 */
    222static inline struct rdma_ah_attr *rvt_get_swqe_ah_attr(struct rvt_swqe *swqe)
    223{
    224	return swqe->ud_wr.attr;
    225}
    226
    227/**
    228 * rvt_get_swqe_remote_qpn - Access the remote QPN value
    229 * @swqe: valid Send WQE
    230 *
    231 */
    232static inline u32 rvt_get_swqe_remote_qpn(struct rvt_swqe *swqe)
    233{
    234	return swqe->ud_wr.wr.remote_qpn;
    235}
    236
    237/**
    238 * rvt_get_swqe_remote_qkey - Acces the remote qkey value
    239 * @swqe: valid Send WQE
    240 *
    241 */
    242static inline u32 rvt_get_swqe_remote_qkey(struct rvt_swqe *swqe)
    243{
    244	return swqe->ud_wr.wr.remote_qkey;
    245}
    246
    247/**
    248 * rvt_get_swqe_pkey_index - Access the pkey index
    249 * @swqe: valid Send WQE
    250 *
    251 */
    252static inline u16 rvt_get_swqe_pkey_index(struct rvt_swqe *swqe)
    253{
    254	return swqe->ud_wr.wr.pkey_index;
    255}
    256
    257struct rvt_rq {
    258	struct rvt_rwq *wq;
    259	struct rvt_krwq *kwq;
    260	u32 size;               /* size of RWQE array */
    261	u8 max_sge;
    262	/* protect changes in this struct */
    263	spinlock_t lock ____cacheline_aligned_in_smp;
    264};
    265
    266/**
    267 * rvt_get_rq_count - count numbers of request work queue entries
    268 * in circular buffer
    269 * @rq: data structure for request queue entry
    270 * @head: head indices of the circular buffer
    271 * @tail: tail indices of the circular buffer
    272 *
    273 * Return - total number of entries in the Receive Queue
    274 */
    275
    276static inline u32 rvt_get_rq_count(struct rvt_rq *rq, u32 head, u32 tail)
    277{
    278	u32 count = head - tail;
    279
    280	if ((s32)count < 0)
    281		count += rq->size;
    282	return count;
    283}
    284
    285/*
    286 * This structure holds the information that the send tasklet needs
    287 * to send a RDMA read response or atomic operation.
    288 */
    289struct rvt_ack_entry {
    290	struct rvt_sge rdma_sge;
    291	u64 atomic_data;
    292	u32 psn;
    293	u32 lpsn;
    294	u8 opcode;
    295	u8 sent;
    296	void *priv;
    297};
    298
    299#define	RC_QP_SCALING_INTERVAL	5
    300
    301#define RVT_OPERATION_PRIV        0x00000001
    302#define RVT_OPERATION_ATOMIC      0x00000002
    303#define RVT_OPERATION_ATOMIC_SGE  0x00000004
    304#define RVT_OPERATION_LOCAL       0x00000008
    305#define RVT_OPERATION_USE_RESERVE 0x00000010
    306#define RVT_OPERATION_IGN_RNR_CNT 0x00000020
    307
    308#define RVT_OPERATION_MAX (IB_WR_RESERVED10 + 1)
    309
    310/**
    311 * rvt_operation_params - op table entry
    312 * @length - the length to copy into the swqe entry
    313 * @qpt_support - a bit mask indicating QP type support
    314 * @flags - RVT_OPERATION flags (see above)
    315 *
    316 * This supports table driven post send so that
    317 * the driver can have differing an potentially
    318 * different sets of operations.
    319 *
    320 **/
    321
    322struct rvt_operation_params {
    323	size_t length;
    324	u32 qpt_support;
    325	u32 flags;
    326};
    327
    328/*
    329 * Common variables are protected by both r_rq.lock and s_lock in that order
    330 * which only happens in modify_qp() or changing the QP 'state'.
    331 */
    332struct rvt_qp {
    333	struct ib_qp ibqp;
    334	void *priv; /* Driver private data */
    335	/* read mostly fields above and below */
    336	struct rdma_ah_attr remote_ah_attr;
    337	struct rdma_ah_attr alt_ah_attr;
    338	struct rvt_qp __rcu *next;           /* link list for QPN hash table */
    339	struct rvt_swqe *s_wq;  /* send work queue */
    340	struct rvt_mmap_info *ip;
    341
    342	unsigned long timeout_jiffies;  /* computed from timeout */
    343
    344	int srate_mbps;		/* s_srate (below) converted to Mbit/s */
    345	pid_t pid;		/* pid for user mode QPs */
    346	u32 remote_qpn;
    347	u32 qkey;               /* QKEY for this QP (for UD or RD) */
    348	u32 s_size;             /* send work queue size */
    349
    350	u16 pmtu;		/* decoded from path_mtu */
    351	u8 log_pmtu;		/* shift for pmtu */
    352	u8 state;               /* QP state */
    353	u8 allowed_ops;		/* high order bits of allowed opcodes */
    354	u8 qp_access_flags;
    355	u8 alt_timeout;         /* Alternate path timeout for this QP */
    356	u8 timeout;             /* Timeout for this QP */
    357	u8 s_srate;
    358	u8 s_mig_state;
    359	u8 port_num;
    360	u8 s_pkey_index;        /* PKEY index to use */
    361	u8 s_alt_pkey_index;    /* Alternate path PKEY index to use */
    362	u8 r_max_rd_atomic;     /* max number of RDMA read/atomic to receive */
    363	u8 s_max_rd_atomic;     /* max number of RDMA read/atomic to send */
    364	u8 s_retry_cnt;         /* number of times to retry */
    365	u8 s_rnr_retry_cnt;
    366	u8 r_min_rnr_timer;     /* retry timeout value for RNR NAKs */
    367	u8 s_max_sge;           /* size of s_wq->sg_list */
    368	u8 s_draining;
    369
    370	/* start of read/write fields */
    371	atomic_t refcount ____cacheline_aligned_in_smp;
    372	wait_queue_head_t wait;
    373
    374	struct rvt_ack_entry *s_ack_queue;
    375	struct rvt_sge_state s_rdma_read_sge;
    376
    377	spinlock_t r_lock ____cacheline_aligned_in_smp;      /* used for APM */
    378	u32 r_psn;              /* expected rcv packet sequence number */
    379	unsigned long r_aflags;
    380	u64 r_wr_id;            /* ID for current receive WQE */
    381	u32 r_ack_psn;          /* PSN for next ACK or atomic ACK */
    382	u32 r_len;              /* total length of r_sge */
    383	u32 r_rcv_len;          /* receive data len processed */
    384	u32 r_msn;              /* message sequence number */
    385
    386	u8 r_state;             /* opcode of last packet received */
    387	u8 r_flags;
    388	u8 r_head_ack_queue;    /* index into s_ack_queue[] */
    389	u8 r_adefered;          /* defered ack count */
    390
    391	struct list_head rspwait;       /* link for waiting to respond */
    392
    393	struct rvt_sge_state r_sge;     /* current receive data */
    394	struct rvt_rq r_rq;             /* receive work queue */
    395
    396	/* post send line */
    397	spinlock_t s_hlock ____cacheline_aligned_in_smp;
    398	u32 s_head;             /* new entries added here */
    399	u32 s_next_psn;         /* PSN for next request */
    400	u32 s_avail;            /* number of entries avail */
    401	u32 s_ssn;              /* SSN of tail entry */
    402	atomic_t s_reserved_used; /* reserved entries in use */
    403
    404	spinlock_t s_lock ____cacheline_aligned_in_smp;
    405	u32 s_flags;
    406	struct rvt_sge_state *s_cur_sge;
    407	struct rvt_swqe *s_wqe;
    408	struct rvt_sge_state s_sge;     /* current send request data */
    409	struct rvt_mregion *s_rdma_mr;
    410	u32 s_len;              /* total length of s_sge */
    411	u32 s_rdma_read_len;    /* total length of s_rdma_read_sge */
    412	u32 s_last_psn;         /* last response PSN processed */
    413	u32 s_sending_psn;      /* lowest PSN that is being sent */
    414	u32 s_sending_hpsn;     /* highest PSN that is being sent */
    415	u32 s_psn;              /* current packet sequence number */
    416	u32 s_ack_rdma_psn;     /* PSN for sending RDMA read responses */
    417	u32 s_ack_psn;          /* PSN for acking sends and RDMA writes */
    418	u32 s_tail;             /* next entry to process */
    419	u32 s_cur;              /* current work queue entry */
    420	u32 s_acked;            /* last un-ACK'ed entry */
    421	u32 s_last;             /* last completed entry */
    422	u32 s_lsn;              /* limit sequence number (credit) */
    423	u32 s_ahgpsn;           /* set to the psn in the copy of the header */
    424	u16 s_cur_size;         /* size of send packet in bytes */
    425	u16 s_rdma_ack_cnt;
    426	u8 s_hdrwords;         /* size of s_hdr in 32 bit words */
    427	s8 s_ahgidx;
    428	u8 s_state;             /* opcode of last packet sent */
    429	u8 s_ack_state;         /* opcode of packet to ACK */
    430	u8 s_nak_state;         /* non-zero if NAK is pending */
    431	u8 r_nak_state;         /* non-zero if NAK is pending */
    432	u8 s_retry;             /* requester retry counter */
    433	u8 s_rnr_retry;         /* requester RNR retry counter */
    434	u8 s_num_rd_atomic;     /* number of RDMA read/atomic pending */
    435	u8 s_tail_ack_queue;    /* index into s_ack_queue[] */
    436	u8 s_acked_ack_queue;   /* index into s_ack_queue[] */
    437
    438	struct rvt_sge_state s_ack_rdma_sge;
    439	struct timer_list s_timer;
    440	struct hrtimer s_rnr_timer;
    441
    442	atomic_t local_ops_pending; /* number of fast_reg/local_inv reqs */
    443
    444	/*
    445	 * This sge list MUST be last. Do not add anything below here.
    446	 */
    447	struct rvt_sge *r_sg_list /* verified SGEs */
    448		____cacheline_aligned_in_smp;
    449};
    450
    451struct rvt_srq {
    452	struct ib_srq ibsrq;
    453	struct rvt_rq rq;
    454	struct rvt_mmap_info *ip;
    455	/* send signal when number of RWQEs < limit */
    456	u32 limit;
    457};
    458
    459static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq)
    460{
    461	return container_of(ibsrq, struct rvt_srq, ibsrq);
    462}
    463
    464static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp)
    465{
    466	return container_of(ibqp, struct rvt_qp, ibqp);
    467}
    468
    469#define RVT_QPN_MAX                 BIT(24)
    470#define RVT_QPNMAP_ENTRIES          (RVT_QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
    471#define RVT_BITS_PER_PAGE           (PAGE_SIZE * BITS_PER_BYTE)
    472#define RVT_BITS_PER_PAGE_MASK      (RVT_BITS_PER_PAGE - 1)
    473#define RVT_QPN_MASK		    IB_QPN_MASK
    474
    475/*
    476 * QPN-map pages start out as NULL, they get allocated upon
    477 * first use and are never deallocated. This way,
    478 * large bitmaps are not allocated unless large numbers of QPs are used.
    479 */
    480struct rvt_qpn_map {
    481	void *page;
    482};
    483
    484struct rvt_qpn_table {
    485	spinlock_t lock; /* protect changes to the qp table */
    486	unsigned flags;         /* flags for QP0/1 allocated for each port */
    487	u32 last;               /* last QP number allocated */
    488	u32 nmaps;              /* size of the map table */
    489	u16 limit;
    490	u8  incr;
    491	/* bit map of free QP numbers other than 0/1 */
    492	struct rvt_qpn_map map[RVT_QPNMAP_ENTRIES];
    493};
    494
    495struct rvt_qp_ibdev {
    496	u32 qp_table_size;
    497	u32 qp_table_bits;
    498	struct rvt_qp __rcu **qp_table;
    499	spinlock_t qpt_lock; /* qptable lock */
    500	struct rvt_qpn_table qpn_table;
    501};
    502
    503/*
    504 * There is one struct rvt_mcast for each multicast GID.
    505 * All attached QPs are then stored as a list of
    506 * struct rvt_mcast_qp.
    507 */
    508struct rvt_mcast_qp {
    509	struct list_head list;
    510	struct rvt_qp *qp;
    511};
    512
    513struct rvt_mcast_addr {
    514	union ib_gid mgid;
    515	u16 lid;
    516};
    517
    518struct rvt_mcast {
    519	struct rb_node rb_node;
    520	struct rvt_mcast_addr mcast_addr;
    521	struct list_head qp_list;
    522	wait_queue_head_t wait;
    523	atomic_t refcount;
    524	int n_attached;
    525};
    526
    527/*
    528 * Since struct rvt_swqe is not a fixed size, we can't simply index into
    529 * struct rvt_qp.s_wq.  This function does the array index computation.
    530 */
    531static inline struct rvt_swqe *rvt_get_swqe_ptr(struct rvt_qp *qp,
    532						unsigned n)
    533{
    534	return (struct rvt_swqe *)((char *)qp->s_wq +
    535				     (sizeof(struct rvt_swqe) +
    536				      qp->s_max_sge *
    537				      sizeof(struct rvt_sge)) * n);
    538}
    539
    540/*
    541 * Since struct rvt_rwqe is not a fixed size, we can't simply index into
    542 * struct rvt_rwq.wq.  This function does the array index computation.
    543 */
    544static inline struct rvt_rwqe *rvt_get_rwqe_ptr(struct rvt_rq *rq, unsigned n)
    545{
    546	return (struct rvt_rwqe *)
    547		((char *)rq->kwq->curr_wq +
    548		 (sizeof(struct rvt_rwqe) +
    549		  rq->max_sge * sizeof(struct ib_sge)) * n);
    550}
    551
    552/**
    553 * rvt_is_user_qp - return if this is user mode QP
    554 * @qp - the target QP
    555 */
    556static inline bool rvt_is_user_qp(struct rvt_qp *qp)
    557{
    558	return !!qp->pid;
    559}
    560
    561/**
    562 * rvt_get_qp - get a QP reference
    563 * @qp - the QP to hold
    564 */
    565static inline void rvt_get_qp(struct rvt_qp *qp)
    566{
    567	atomic_inc(&qp->refcount);
    568}
    569
    570/**
    571 * rvt_put_qp - release a QP reference
    572 * @qp - the QP to release
    573 */
    574static inline void rvt_put_qp(struct rvt_qp *qp)
    575{
    576	if (qp && atomic_dec_and_test(&qp->refcount))
    577		wake_up(&qp->wait);
    578}
    579
    580/**
    581 * rvt_put_swqe - drop mr refs held by swqe
    582 * @wqe - the send wqe
    583 *
    584 * This drops any mr references held by the swqe
    585 */
    586static inline void rvt_put_swqe(struct rvt_swqe *wqe)
    587{
    588	int i;
    589
    590	for (i = 0; i < wqe->wr.num_sge; i++) {
    591		struct rvt_sge *sge = &wqe->sg_list[i];
    592
    593		rvt_put_mr(sge->mr);
    594	}
    595}
    596
    597/**
    598 * rvt_qp_wqe_reserve - reserve operation
    599 * @qp - the rvt qp
    600 * @wqe - the send wqe
    601 *
    602 * This routine used in post send to record
    603 * a wqe relative reserved operation use.
    604 */
    605static inline void rvt_qp_wqe_reserve(
    606	struct rvt_qp *qp,
    607	struct rvt_swqe *wqe)
    608{
    609	atomic_inc(&qp->s_reserved_used);
    610}
    611
    612/**
    613 * rvt_qp_wqe_unreserve - clean reserved operation
    614 * @qp - the rvt qp
    615 * @flags - send wqe flags
    616 *
    617 * This decrements the reserve use count.
    618 *
    619 * This call MUST precede the change to
    620 * s_last to insure that post send sees a stable
    621 * s_avail.
    622 *
    623 * An smp_mp__after_atomic() is used to insure
    624 * the compiler does not juggle the order of the s_last
    625 * ring index and the decrementing of s_reserved_used.
    626 */
    627static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags)
    628{
    629	if (unlikely(flags & RVT_SEND_RESERVE_USED)) {
    630		atomic_dec(&qp->s_reserved_used);
    631		/* insure no compiler re-order up to s_last change */
    632		smp_mb__after_atomic();
    633	}
    634}
    635
    636extern const enum ib_wc_opcode ib_rvt_wc_opcode[];
    637
    638/*
    639 * Compare the lower 24 bits of the msn values.
    640 * Returns an integer <, ==, or > than zero.
    641 */
    642static inline int rvt_cmp_msn(u32 a, u32 b)
    643{
    644	return (((int)a) - ((int)b)) << 8;
    645}
    646
    647__be32 rvt_compute_aeth(struct rvt_qp *qp);
    648
    649void rvt_get_credit(struct rvt_qp *qp, u32 aeth);
    650
    651u32 rvt_restart_sge(struct rvt_sge_state *ss, struct rvt_swqe *wqe, u32 len);
    652
    653/**
    654 * rvt_div_round_up_mtu - round up divide
    655 * @qp - the qp pair
    656 * @len - the length
    657 *
    658 * Perform a shift based mtu round up divide
    659 */
    660static inline u32 rvt_div_round_up_mtu(struct rvt_qp *qp, u32 len)
    661{
    662	return (len + qp->pmtu - 1) >> qp->log_pmtu;
    663}
    664
    665/**
    666 * @qp - the qp pair
    667 * @len - the length
    668 *
    669 * Perform a shift based mtu divide
    670 */
    671static inline u32 rvt_div_mtu(struct rvt_qp *qp, u32 len)
    672{
    673	return len >> qp->log_pmtu;
    674}
    675
    676/**
    677 * rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies
    678 * @timeout - timeout input(0 - 31).
    679 *
    680 * Return a timeout value in jiffies.
    681 */
    682static inline unsigned long rvt_timeout_to_jiffies(u8 timeout)
    683{
    684	if (timeout > 31)
    685		timeout = 31;
    686
    687	return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL;
    688}
    689
    690/**
    691 * rvt_lookup_qpn - return the QP with the given QPN
    692 * @ibp: the ibport
    693 * @qpn: the QP number to look up
    694 *
    695 * The caller must hold the rcu_read_lock(), and keep the lock until
    696 * the returned qp is no longer in use.
    697 */
    698static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi,
    699					    struct rvt_ibport *rvp,
    700					    u32 qpn) __must_hold(RCU)
    701{
    702	struct rvt_qp *qp = NULL;
    703
    704	if (unlikely(qpn <= 1)) {
    705		qp = rcu_dereference(rvp->qp[qpn]);
    706	} else {
    707		u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits);
    708
    709		for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp;
    710			qp = rcu_dereference(qp->next))
    711			if (qp->ibqp.qp_num == qpn)
    712				break;
    713	}
    714	return qp;
    715}
    716
    717/**
    718 * rvt_mod_retry_timer - mod a retry timer
    719 * @qp - the QP
    720 * @shift - timeout shift to wait for multiple packets
    721 * Modify a potentially already running retry timer
    722 */
    723static inline void rvt_mod_retry_timer_ext(struct rvt_qp *qp, u8 shift)
    724{
    725	struct ib_qp *ibqp = &qp->ibqp;
    726	struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
    727
    728	lockdep_assert_held(&qp->s_lock);
    729	qp->s_flags |= RVT_S_TIMER;
    730	/* 4.096 usec. * (1 << qp->timeout) */
    731	mod_timer(&qp->s_timer, jiffies + rdi->busy_jiffies +
    732		  (qp->timeout_jiffies << shift));
    733}
    734
    735static inline void rvt_mod_retry_timer(struct rvt_qp *qp)
    736{
    737	return rvt_mod_retry_timer_ext(qp, 0);
    738}
    739
    740/**
    741 * rvt_put_qp_swqe - drop refs held by swqe
    742 * @qp: the send qp
    743 * @wqe: the send wqe
    744 *
    745 * This drops any references held by the swqe
    746 */
    747static inline void rvt_put_qp_swqe(struct rvt_qp *qp, struct rvt_swqe *wqe)
    748{
    749	rvt_put_swqe(wqe);
    750	if (qp->allowed_ops == IB_OPCODE_UD)
    751		rdma_destroy_ah_attr(wqe->ud_wr.attr);
    752}
    753
    754/**
    755 * rvt_qp_sqwe_incr - increment ring index
    756 * @qp: the qp
    757 * @val: the starting value
    758 *
    759 * Return: the new value wrapping as appropriate
    760 */
    761static inline u32
    762rvt_qp_swqe_incr(struct rvt_qp *qp, u32 val)
    763{
    764	if (++val >= qp->s_size)
    765		val = 0;
    766	return val;
    767}
    768
    769int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err);
    770
    771/**
    772 * rvt_recv_cq - add a new entry to completion queue
    773 *			by receive queue
    774 * @qp: receive queue
    775 * @wc: work completion entry to add
    776 * @solicited: true if @entry is solicited
    777 *
    778 * This is wrapper function for rvt_enter_cq function call by
    779 * receive queue. If rvt_cq_enter return false, it means cq is
    780 * full and the qp is put into error state.
    781 */
    782static inline void rvt_recv_cq(struct rvt_qp *qp, struct ib_wc *wc,
    783			       bool solicited)
    784{
    785	struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.recv_cq);
    786
    787	if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
    788		rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
    789}
    790
    791/**
    792 * rvt_send_cq - add a new entry to completion queue
    793 *                        by send queue
    794 * @qp: send queue
    795 * @wc: work completion entry to add
    796 * @solicited: true if @entry is solicited
    797 *
    798 * This is wrapper function for rvt_enter_cq function call by
    799 * send queue. If rvt_cq_enter return false, it means cq is
    800 * full and the qp is put into error state.
    801 */
    802static inline void rvt_send_cq(struct rvt_qp *qp, struct ib_wc *wc,
    803			       bool solicited)
    804{
    805	struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.send_cq);
    806
    807	if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
    808		rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
    809}
    810
    811/**
    812 * rvt_qp_complete_swqe - insert send completion
    813 * @qp - the qp
    814 * @wqe - the send wqe
    815 * @opcode - wc operation (driver dependent)
    816 * @status - completion status
    817 *
    818 * Update the s_last information, and then insert a send
    819 * completion into the completion
    820 * queue if the qp indicates it should be done.
    821 *
    822 * See IBTA 10.7.3.1 for info on completion
    823 * control.
    824 *
    825 * Return: new last
    826 */
    827static inline u32
    828rvt_qp_complete_swqe(struct rvt_qp *qp,
    829		     struct rvt_swqe *wqe,
    830		     enum ib_wc_opcode opcode,
    831		     enum ib_wc_status status)
    832{
    833	bool need_completion;
    834	u64 wr_id;
    835	u32 byte_len, last;
    836	int flags = wqe->wr.send_flags;
    837
    838	rvt_qp_wqe_unreserve(qp, flags);
    839	rvt_put_qp_swqe(qp, wqe);
    840
    841	need_completion =
    842		!(flags & RVT_SEND_RESERVE_USED) &&
    843		(!(qp->s_flags & RVT_S_SIGNAL_REQ_WR) ||
    844		(flags & IB_SEND_SIGNALED) ||
    845		status != IB_WC_SUCCESS);
    846	if (need_completion) {
    847		wr_id = wqe->wr.wr_id;
    848		byte_len = wqe->length;
    849		/* above fields required before writing s_last */
    850	}
    851	last = rvt_qp_swqe_incr(qp, qp->s_last);
    852	/* see rvt_qp_is_avail() */
    853	smp_store_release(&qp->s_last, last);
    854	if (need_completion) {
    855		struct ib_wc w = {
    856			.wr_id = wr_id,
    857			.status = status,
    858			.opcode = opcode,
    859			.qp = &qp->ibqp,
    860			.byte_len = byte_len,
    861		};
    862		rvt_send_cq(qp, &w, status != IB_WC_SUCCESS);
    863	}
    864	return last;
    865}
    866
    867extern const int  ib_rvt_state_ops[];
    868
    869struct rvt_dev_info;
    870int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only);
    871void rvt_comm_est(struct rvt_qp *qp);
    872void rvt_rc_error(struct rvt_qp *qp, enum ib_wc_status err);
    873unsigned long rvt_rnr_tbl_to_usec(u32 index);
    874enum hrtimer_restart rvt_rc_rnr_retry(struct hrtimer *t);
    875void rvt_add_rnr_timer(struct rvt_qp *qp, u32 aeth);
    876void rvt_del_timers_sync(struct rvt_qp *qp);
    877void rvt_stop_rc_timers(struct rvt_qp *qp);
    878void rvt_add_retry_timer_ext(struct rvt_qp *qp, u8 shift);
    879static inline void rvt_add_retry_timer(struct rvt_qp *qp)
    880{
    881	rvt_add_retry_timer_ext(qp, 0);
    882}
    883
    884void rvt_copy_sge(struct rvt_qp *qp, struct rvt_sge_state *ss,
    885		  void *data, u32 length,
    886		  bool release, bool copy_last);
    887void rvt_send_complete(struct rvt_qp *qp, struct rvt_swqe *wqe,
    888		       enum ib_wc_status status);
    889void rvt_ruc_loopback(struct rvt_qp *qp);
    890
    891/**
    892 * struct rvt_qp_iter - the iterator for QPs
    893 * @qp - the current QP
    894 *
    895 * This structure defines the current iterator
    896 * state for sequenced access to all QPs relative
    897 * to an rvt_dev_info.
    898 */
    899struct rvt_qp_iter {
    900	struct rvt_qp *qp;
    901	/* private: backpointer */
    902	struct rvt_dev_info *rdi;
    903	/* private: callback routine */
    904	void (*cb)(struct rvt_qp *qp, u64 v);
    905	/* private: for arg to callback routine */
    906	u64 v;
    907	/* private: number of SMI,GSI QPs for device */
    908	int specials;
    909	/* private: current iterator index */
    910	int n;
    911};
    912
    913/**
    914 * ib_cq_tail - Return tail index of cq buffer
    915 * @send_cq - The cq for send
    916 *
    917 * This is called in qp_iter_print to get tail
    918 * of cq buffer.
    919 */
    920static inline u32 ib_cq_tail(struct ib_cq *send_cq)
    921{
    922	struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
    923
    924	return ibcq_to_rvtcq(send_cq)->ip ?
    925	       RDMA_READ_UAPI_ATOMIC(cq->queue->tail) :
    926	       ibcq_to_rvtcq(send_cq)->kqueue->tail;
    927}
    928
    929/**
    930 * ib_cq_head - Return head index of cq buffer
    931 * @send_cq - The cq for send
    932 *
    933 * This is called in qp_iter_print to get head
    934 * of cq buffer.
    935 */
    936static inline u32 ib_cq_head(struct ib_cq *send_cq)
    937{
    938	struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
    939
    940	return ibcq_to_rvtcq(send_cq)->ip ?
    941	       RDMA_READ_UAPI_ATOMIC(cq->queue->head) :
    942	       ibcq_to_rvtcq(send_cq)->kqueue->head;
    943}
    944
    945/**
    946 * rvt_free_rq - free memory allocated for rvt_rq struct
    947 * @rvt_rq: request queue data structure
    948 *
    949 * This function should only be called if the rvt_mmap_info()
    950 * has not succeeded.
    951 */
    952static inline void rvt_free_rq(struct rvt_rq *rq)
    953{
    954	kvfree(rq->kwq);
    955	rq->kwq = NULL;
    956	vfree(rq->wq);
    957	rq->wq = NULL;
    958}
    959
    960/**
    961 * rvt_to_iport - Get the ibport pointer
    962 * @qp: the qp pointer
    963 *
    964 * This function returns the ibport pointer from the qp pointer.
    965 */
    966static inline struct rvt_ibport *rvt_to_iport(struct rvt_qp *qp)
    967{
    968	struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
    969
    970	return rdi->ports[qp->port_num - 1];
    971}
    972
    973/**
    974 * rvt_rc_credit_avail - Check if there are enough RC credits for the request
    975 * @qp: the qp
    976 * @wqe: the request
    977 *
    978 * This function returns false when there are not enough credits for the given
    979 * request and true otherwise.
    980 */
    981static inline bool rvt_rc_credit_avail(struct rvt_qp *qp, struct rvt_swqe *wqe)
    982{
    983	lockdep_assert_held(&qp->s_lock);
    984	if (!(qp->s_flags & RVT_S_UNLIMITED_CREDIT) &&
    985	    rvt_cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) {
    986		struct rvt_ibport *rvp = rvt_to_iport(qp);
    987
    988		qp->s_flags |= RVT_S_WAIT_SSN_CREDIT;
    989		rvp->n_rc_crwaits++;
    990		return false;
    991	}
    992	return true;
    993}
    994
    995struct rvt_qp_iter *rvt_qp_iter_init(struct rvt_dev_info *rdi,
    996				     u64 v,
    997				     void (*cb)(struct rvt_qp *qp, u64 v));
    998int rvt_qp_iter_next(struct rvt_qp_iter *iter);
    999void rvt_qp_iter(struct rvt_dev_info *rdi,
   1000		 u64 v,
   1001		 void (*cb)(struct rvt_qp *qp, u64 v));
   1002void rvt_qp_mr_clean(struct rvt_qp *qp, u32 lkey);
   1003#endif          /* DEF_RDMAVT_INCQP_H */