ucc_slow.h (8913B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. 4 * 5 * Authors: Shlomi Gridish <gridish@freescale.com> 6 * Li Yang <leoli@freescale.com> 7 * 8 * Description: 9 * Internal header file for UCC SLOW unit routines. 10 */ 11#ifndef __UCC_SLOW_H__ 12#define __UCC_SLOW_H__ 13 14#include <linux/types.h> 15 16#include <soc/fsl/qe/immap_qe.h> 17#include <soc/fsl/qe/qe.h> 18 19#include <soc/fsl/qe/ucc.h> 20 21/* transmit BD's status */ 22#define T_R 0x80000000 /* ready bit */ 23#define T_PAD 0x40000000 /* add pads to short frames */ 24#define T_W 0x20000000 /* wrap bit */ 25#define T_I 0x10000000 /* interrupt on completion */ 26#define T_L 0x08000000 /* last */ 27 28#define T_A 0x04000000 /* Address - the data transmitted as address 29 chars */ 30#define T_TC 0x04000000 /* transmit CRC */ 31#define T_CM 0x02000000 /* continuous mode */ 32#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ 33#define T_P 0x01000000 /* Preamble - send Preamble sequence before 34 data */ 35#define T_HB 0x01000000 /* heartbeat */ 36#define T_NS 0x00800000 /* No Stop */ 37#define T_LC 0x00800000 /* late collision */ 38#define T_RL 0x00400000 /* retransmission limit */ 39#define T_UN 0x00020000 /* underrun */ 40#define T_CT 0x00010000 /* CTS lost */ 41#define T_CSL 0x00010000 /* carrier sense lost */ 42#define T_RC 0x003c0000 /* retry count */ 43 44/* Receive BD's status */ 45#define R_E 0x80000000 /* buffer empty */ 46#define R_W 0x20000000 /* wrap bit */ 47#define R_I 0x10000000 /* interrupt on reception */ 48#define R_L 0x08000000 /* last */ 49#define R_C 0x08000000 /* the last byte in this buffer is a cntl 50 char */ 51#define R_F 0x04000000 /* first */ 52#define R_A 0x04000000 /* the first byte in this buffer is address 53 byte */ 54#define R_CM 0x02000000 /* continuous mode */ 55#define R_ID 0x01000000 /* buffer close on reception of idles */ 56#define R_M 0x01000000 /* Frame received because of promiscuous 57 mode */ 58#define R_AM 0x00800000 /* Address match */ 59#define R_DE 0x00800000 /* Address match */ 60#define R_LG 0x00200000 /* Break received */ 61#define R_BR 0x00200000 /* Frame length violation */ 62#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ 63#define R_FR 0x00100000 /* Framing Error (no stop bit) character 64 received */ 65#define R_PR 0x00080000 /* Parity Error character received */ 66#define R_AB 0x00080000 /* Frame Aborted */ 67#define R_SH 0x00080000 /* frame is too short */ 68#define R_CR 0x00040000 /* CRC Error */ 69#define R_OV 0x00020000 /* Overrun */ 70#define R_CD 0x00010000 /* CD lost */ 71#define R_CL 0x00010000 /* this frame is closed because of a 72 collision */ 73 74/* Rx Data buffer must be 4 bytes aligned in most cases.*/ 75#define UCC_SLOW_RX_ALIGN 4 76#define UCC_SLOW_MRBLR_ALIGNMENT 4 77#define UCC_SLOW_PRAM_SIZE 0x100 78#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 79 80/* UCC Slow Channel Protocol Mode */ 81enum ucc_slow_channel_protocol_mode { 82 UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, 83 UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, 84 UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, 85}; 86 87/* UCC Slow Transparent Transmit CRC (TCRC) */ 88enum ucc_slow_transparent_tcrc { 89 /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ 90 UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, 91 /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ 92 UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, 93 /* 32-bit CCITT CRC (Ethernet and HDLC) */ 94 UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, 95}; 96 97/* UCC Slow oversampling rate for transmitter (TDCR) */ 98enum ucc_slow_tx_oversampling_rate { 99 /* 1x clock mode */ 100 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, 101 /* 8x clock mode */ 102 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, 103 /* 16x clock mode */ 104 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, 105 /* 32x clock mode */ 106 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, 107}; 108 109/* UCC Slow Oversampling rate for receiver (RDCR) 110*/ 111enum ucc_slow_rx_oversampling_rate { 112 /* 1x clock mode */ 113 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, 114 /* 8x clock mode */ 115 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, 116 /* 16x clock mode */ 117 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, 118 /* 32x clock mode */ 119 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, 120}; 121 122/* UCC Slow Transmitter encoding method (TENC) 123*/ 124enum ucc_slow_tx_encoding_method { 125 UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, 126 UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 127}; 128 129/* UCC Slow Receiver decoding method (RENC) 130*/ 131enum ucc_slow_rx_decoding_method { 132 UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, 133 UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 134}; 135 136/* UCC Slow Diagnostic mode (DIAG) 137*/ 138enum ucc_slow_diag_mode { 139 UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, 140 UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, 141 UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, 142 UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 143}; 144 145struct ucc_slow_info { 146 int ucc_num; 147 int protocol; /* QE_CR_PROTOCOL_xxx */ 148 enum qe_clock rx_clock; 149 enum qe_clock tx_clock; 150 phys_addr_t regs; 151 int irq; 152 u16 uccm_mask; 153 int data_mem_part; 154 int init_tx; 155 int init_rx; 156 u32 tx_bd_ring_len; 157 u32 rx_bd_ring_len; 158 int rx_interrupts; 159 int brkpt_support; 160 int grant_support; 161 int tsa; 162 int cdp; 163 int cds; 164 int ctsp; 165 int ctss; 166 int rinv; 167 int tinv; 168 int rtsm; 169 int rfw; 170 int tci; 171 int tend; 172 int tfl; 173 int txsy; 174 u16 max_rx_buf_length; 175 enum ucc_slow_transparent_tcrc tcrc; 176 enum ucc_slow_channel_protocol_mode mode; 177 enum ucc_slow_diag_mode diag; 178 enum ucc_slow_tx_oversampling_rate tdcr; 179 enum ucc_slow_rx_oversampling_rate rdcr; 180 enum ucc_slow_tx_encoding_method tenc; 181 enum ucc_slow_rx_decoding_method renc; 182}; 183 184struct ucc_slow_private { 185 struct ucc_slow_info *us_info; 186 struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ 187 struct ucc_slow_pram __iomem *us_pram; /* a pointer to the parameter RAM */ 188 s32 us_pram_offset; 189 int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ 190 int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ 191 int stopped_tx; /* Whether channel has been stopped for Tx 192 (STOP_TX, etc.) */ 193 int stopped_rx; /* Whether channel has been stopped for Rx */ 194 struct list_head confQ; /* frames passed to chip waiting for tx */ 195 u32 first_tx_bd_mask; /* mask is used in Tx routine to save status 196 and length for first BD in a frame */ 197 s32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ 198 s32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ 199 struct qe_bd __iomem *confBd; /* next BD for confirm after Tx */ 200 struct qe_bd __iomem *tx_bd; /* next BD for new Tx request */ 201 struct qe_bd __iomem *rx_bd; /* next BD to collect after Rx */ 202 void *p_rx_frame; /* accumulating receive frame */ 203 __be16 __iomem *p_ucce; /* a pointer to the event register in memory */ 204 __be16 __iomem *p_uccm; /* a pointer to the mask register in memory */ 205 u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ 206#ifdef STATISTICS 207 u32 tx_frames; /* Transmitted frames counters */ 208 u32 rx_frames; /* Received frames counters (only frames 209 passed to application) */ 210 u32 rx_discarded; /* Discarded frames counters (frames that 211 were discarded by the driver due to 212 errors) */ 213#endif /* STATISTICS */ 214}; 215 216/* ucc_slow_init 217 * Initializes Slow UCC according to provided parameters. 218 * 219 * us_info - (In) pointer to the slow UCC info structure. 220 * uccs_ret - (Out) pointer to the slow UCC structure. 221 */ 222int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); 223 224/* ucc_slow_free 225 * Frees all resources for slow UCC. 226 * 227 * uccs - (In) pointer to the slow UCC structure. 228 */ 229void ucc_slow_free(struct ucc_slow_private * uccs); 230 231/* ucc_slow_enable 232 * Enables a fast UCC port. 233 * This routine enables Tx and/or Rx through the General UCC Mode Register. 234 * 235 * uccs - (In) pointer to the slow UCC structure. 236 * mode - (In) TX, RX, or both. 237 */ 238void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); 239 240/* ucc_slow_disable 241 * Disables a fast UCC port. 242 * This routine disables Tx and/or Rx through the General UCC Mode Register. 243 * 244 * uccs - (In) pointer to the slow UCC structure. 245 * mode - (In) TX, RX, or both. 246 */ 247void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); 248 249/* ucc_slow_graceful_stop_tx 250 * Smoothly stops transmission on a specified slow UCC. 251 * 252 * uccs - (In) pointer to the slow UCC structure. 253 */ 254void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); 255 256/* ucc_slow_stop_tx 257 * Stops transmission on a specified slow UCC. 258 * 259 * uccs - (In) pointer to the slow UCC structure. 260 */ 261void ucc_slow_stop_tx(struct ucc_slow_private * uccs); 262 263/* ucc_slow_restart_tx 264 * Restarts transmitting on a specified slow UCC. 265 * 266 * uccs - (In) pointer to the slow UCC structure. 267 */ 268void ucc_slow_restart_tx(struct ucc_slow_private *uccs); 269 270u32 ucc_slow_get_qe_cr_subblock(int uccs_num); 271 272#endif /* __UCC_SLOW_H__ */