lirc.h (8327B)
1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * lirc.h - linux infrared remote control header file 4 */ 5 6#ifndef _LINUX_LIRC_H 7#define _LINUX_LIRC_H 8 9#include <linux/types.h> 10#include <linux/ioctl.h> 11 12#define PULSE_BIT 0x01000000 13#define PULSE_MASK 0x00FFFFFF 14 15#define LIRC_MODE2_SPACE 0x00000000 16#define LIRC_MODE2_PULSE 0x01000000 17#define LIRC_MODE2_FREQUENCY 0x02000000 18#define LIRC_MODE2_TIMEOUT 0x03000000 19#define LIRC_MODE2_OVERFLOW 0x04000000 20 21#define LIRC_VALUE_MASK 0x00FFFFFF 22#define LIRC_MODE2_MASK 0xFF000000 23 24#define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) 25#define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) 26#define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) 27#define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) 28#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW) 29 30#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) 31#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) 32 33#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) 34#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) 35#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) 36#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) 37#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW) 38 39/* used heavily by lirc userspace */ 40#define lirc_t int 41 42/*** lirc compatible hardware features ***/ 43 44#define LIRC_MODE2SEND(x) (x) 45#define LIRC_SEND2MODE(x) (x) 46#define LIRC_MODE2REC(x) ((x) << 16) 47#define LIRC_REC2MODE(x) ((x) >> 16) 48 49#define LIRC_MODE_RAW 0x00000001 50#define LIRC_MODE_PULSE 0x00000002 51#define LIRC_MODE_MODE2 0x00000004 52#define LIRC_MODE_SCANCODE 0x00000008 53#define LIRC_MODE_LIRCCODE 0x00000010 54 55 56#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) 57#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) 58#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) 59#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) 60 61#define LIRC_CAN_SEND_MASK 0x0000003f 62 63#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 64#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 65#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 66 67#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) 68#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) 69#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) 70#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) 71#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) 72 73#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) 74 75#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) 76 77#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 78#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 79#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 80 81#define LIRC_CAN_MEASURE_CARRIER 0x02000000 82#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 83 84#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) 85#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) 86 87/* 88 * Unused features. These features were never implemented, in tree or 89 * out of tree. These definitions are here so not to break the lircd build. 90 */ 91#define LIRC_CAN_SET_REC_FILTER 0 92#define LIRC_CAN_NOTIFY_DECODE 0 93 94/*** IOCTL commands for lirc driver ***/ 95 96#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) 97 98#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) 99#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) 100#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) 101 102#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) 103#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) 104 105/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ 106#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) 107 108#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) 109#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) 110/* Note: these can reset the according pulse_width */ 111#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) 112#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) 113#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) 114#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) 115 116/* 117 * when a timeout != 0 is set the driver will send a 118 * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is 119 * never sent, timeout is disabled by default 120 */ 121#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) 122 123/* 1 enables, 0 disables timeout reports in MODE2 */ 124#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) 125 126/* 127 * if enabled from the next key press on the driver will send 128 * LIRC_MODE2_FREQUENCY packets 129 */ 130#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) 131 132/* 133 * to set a range use LIRC_SET_REC_CARRIER_RANGE with the 134 * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound 135 */ 136#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) 137 138#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) 139 140/* 141 * Return the recording timeout, which is either set by 142 * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols. 143 */ 144#define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32) 145 146/** 147 * struct lirc_scancode - decoded scancode with protocol for use with 148 * LIRC_MODE_SCANCODE 149 * 150 * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR 151 * was decoded. 152 * @flags: should be 0 for transmit. When receiving scancodes, 153 * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set 154 * depending on the protocol 155 * @rc_proto: see enum rc_proto 156 * @keycode: the translated keycode. Set to 0 for transmit. 157 * @scancode: the scancode received or to be sent 158 */ 159struct lirc_scancode { 160 __u64 timestamp; 161 __u16 flags; 162 __u16 rc_proto; 163 __u32 keycode; 164 __u64 scancode; 165}; 166 167/* Set if the toggle bit of rc-5 or rc-6 is enabled */ 168#define LIRC_SCANCODE_FLAG_TOGGLE 1 169/* Set if this is a nec or sanyo repeat */ 170#define LIRC_SCANCODE_FLAG_REPEAT 2 171 172/** 173 * enum rc_proto - the Remote Controller protocol 174 * 175 * @RC_PROTO_UNKNOWN: Protocol not known 176 * @RC_PROTO_OTHER: Protocol known but proprietary 177 * @RC_PROTO_RC5: Philips RC5 protocol 178 * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol 179 * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 180 * @RC_PROTO_JVC: JVC protocol 181 * @RC_PROTO_SONY12: Sony 12 bit protocol 182 * @RC_PROTO_SONY15: Sony 15 bit protocol 183 * @RC_PROTO_SONY20: Sony 20 bit protocol 184 * @RC_PROTO_NEC: NEC protocol 185 * @RC_PROTO_NECX: Extended NEC protocol 186 * @RC_PROTO_NEC32: NEC 32 bit protocol 187 * @RC_PROTO_SANYO: Sanyo protocol 188 * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard 189 * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse 190 * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol 191 * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol 192 * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol 193 * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol 194 * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol 195 * @RC_PROTO_SHARP: Sharp protocol 196 * @RC_PROTO_XMP: XMP protocol 197 * @RC_PROTO_CEC: CEC protocol 198 * @RC_PROTO_IMON: iMon Pad protocol 199 * @RC_PROTO_RCMM12: RC-MM protocol 12 bits 200 * @RC_PROTO_RCMM24: RC-MM protocol 24 bits 201 * @RC_PROTO_RCMM32: RC-MM protocol 32 bits 202 * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol 203 * @RC_PROTO_MAX: Maximum value of enum rc_proto 204 */ 205enum rc_proto { 206 RC_PROTO_UNKNOWN = 0, 207 RC_PROTO_OTHER = 1, 208 RC_PROTO_RC5 = 2, 209 RC_PROTO_RC5X_20 = 3, 210 RC_PROTO_RC5_SZ = 4, 211 RC_PROTO_JVC = 5, 212 RC_PROTO_SONY12 = 6, 213 RC_PROTO_SONY15 = 7, 214 RC_PROTO_SONY20 = 8, 215 RC_PROTO_NEC = 9, 216 RC_PROTO_NECX = 10, 217 RC_PROTO_NEC32 = 11, 218 RC_PROTO_SANYO = 12, 219 RC_PROTO_MCIR2_KBD = 13, 220 RC_PROTO_MCIR2_MSE = 14, 221 RC_PROTO_RC6_0 = 15, 222 RC_PROTO_RC6_6A_20 = 16, 223 RC_PROTO_RC6_6A_24 = 17, 224 RC_PROTO_RC6_6A_32 = 18, 225 RC_PROTO_RC6_MCE = 19, 226 RC_PROTO_SHARP = 20, 227 RC_PROTO_XMP = 21, 228 RC_PROTO_CEC = 22, 229 RC_PROTO_IMON = 23, 230 RC_PROTO_RCMM12 = 24, 231 RC_PROTO_RCMM24 = 25, 232 RC_PROTO_RCMM32 = 26, 233 RC_PROTO_XBOX_DVD = 27, 234 RC_PROTO_MAX = RC_PROTO_XBOX_DVD, 235}; 236 237#endif