mtio.h (8175B)
1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * linux/mtio.h header file for Linux. Written by H. Bergman 4 * 5 * Modified for special ioctls provided by zftape in September 1997 6 * by C.-J. Heine. 7 */ 8 9#ifndef _LINUX_MTIO_H 10#define _LINUX_MTIO_H 11 12#include <linux/types.h> 13#include <linux/ioctl.h> 14 15/* 16 * Structures and definitions for mag tape io control commands 17 */ 18 19/* structure for MTIOCTOP - mag tape op command */ 20struct mtop { 21 short mt_op; /* operations defined below */ 22 int mt_count; /* how many of them */ 23}; 24 25/* Magnetic Tape operations [Not all operations supported by all drivers]: */ 26#define MTRESET 0 /* +reset drive in case of problems */ 27#define MTFSF 1 /* forward space over FileMark, 28 * position at first record of next file 29 */ 30#define MTBSF 2 /* backward space FileMark (position before FM) */ 31#define MTFSR 3 /* forward space record */ 32#define MTBSR 4 /* backward space record */ 33#define MTWEOF 5 /* write an end-of-file record (mark) */ 34#define MTREW 6 /* rewind */ 35#define MTOFFL 7 /* rewind and put the drive offline (eject?) */ 36#define MTNOP 8 /* no op, set status only (read with MTIOCGET) */ 37#define MTRETEN 9 /* retension tape */ 38#define MTBSFM 10 /* +backward space FileMark, position at FM */ 39#define MTFSFM 11 /* +forward space FileMark, position at FM */ 40#define MTEOM 12 /* goto end of recorded media (for appending files). 41 * MTEOM positions after the last FM, ready for 42 * appending another file. 43 */ 44#define MTERASE 13 /* erase tape -- be careful! */ 45 46#define MTRAS1 14 /* run self test 1 (nondestructive) */ 47#define MTRAS2 15 /* run self test 2 (destructive) */ 48#define MTRAS3 16 /* reserved for self test 3 */ 49 50#define MTSETBLK 20 /* set block length (SCSI) */ 51#define MTSETDENSITY 21 /* set tape density (SCSI) */ 52#define MTSEEK 22 /* seek to block (Tandberg, etc.) */ 53#define MTTELL 23 /* tell block (Tandberg, etc.) */ 54#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */ 55 /* ordinary buffered operation with code 1 */ 56#define MTFSS 25 /* space forward over setmarks */ 57#define MTBSS 26 /* space backward over setmarks */ 58#define MTWSM 27 /* write setmarks */ 59 60#define MTLOCK 28 /* lock the drive door */ 61#define MTUNLOCK 29 /* unlock the drive door */ 62#define MTLOAD 30 /* execute the SCSI load command */ 63#define MTUNLOAD 31 /* execute the SCSI unload command */ 64#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */ 65#define MTSETPART 33 /* Change the active tape partition */ 66#define MTMKPART 34 /* Format the tape with one or two partitions */ 67#define MTWEOFI 35 /* write an end-of-file record (mark) in immediate mode */ 68 69/* structure for MTIOCGET - mag tape get status command */ 70 71struct mtget { 72 long mt_type; /* type of magtape device */ 73 long mt_resid; /* residual count: (not sure) 74 * number of bytes ignored, or 75 * number of files not skipped, or 76 * number of records not skipped. 77 */ 78 /* the following registers are device dependent */ 79 long mt_dsreg; /* status register */ 80 long mt_gstat; /* generic (device independent) status */ 81 long mt_erreg; /* error register */ 82 /* The next two fields are not always used */ 83 __kernel_daddr_t mt_fileno; /* number of current file on tape */ 84 __kernel_daddr_t mt_blkno; /* current block number */ 85}; 86 87 88 89/* 90 * Constants for mt_type. Not all of these are supported, 91 * and these are not all of the ones that are supported. 92 */ 93#define MT_ISUNKNOWN 0x01 94#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer */ 95#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02 */ 96#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02? */ 97#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?) */ 98#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24 */ 99#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02 */ 100#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L */ 101#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L */ 102#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller */ 103#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features */ 104#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24 */ 105#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */ 106#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40) */ 107#define MT_ISDDS1 0x51 /* DDS device without partitions */ 108#define MT_ISDDS2 0x52 /* DDS device with partitions */ 109#define MT_ISONSTREAM_SC 0x61 /* OnStream SCSI tape drives (SC-x0) 110 and SCSI emulated (DI, DP, USB) */ 111#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit */ 112#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit */ 113 114/* QIC-40/80/3010/3020 ftape supported drives. 115 * 20bit vendor ID + 0x800000 (see ftape-vendors.h) 116 */ 117#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ 118#define MT_ISFTAPE_FLAG 0x800000 119 120 121/* structure for MTIOCPOS - mag tape get position command */ 122 123struct mtpos { 124 long mt_blkno; /* current block number */ 125}; 126 127 128/* mag tape io control commands */ 129#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ 130#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ 131#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ 132 133 134/* Generic Mag Tape (device independent) status macros for examining 135 * mt_gstat -- HP-UX compatible. 136 * There is room for more generic status bits here, but I don't 137 * know which of them are reserved. At least three or so should 138 * be added to make this really useful. 139 */ 140#define GMT_EOF(x) ((x) & 0x80000000) 141#define GMT_BOT(x) ((x) & 0x40000000) 142#define GMT_EOT(x) ((x) & 0x20000000) 143#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */ 144#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */ 145#define GMT_WR_PROT(x) ((x) & 0x04000000) 146/* #define GMT_ ? ((x) & 0x02000000) */ 147#define GMT_ONLINE(x) ((x) & 0x01000000) 148#define GMT_D_6250(x) ((x) & 0x00800000) 149#define GMT_D_1600(x) ((x) & 0x00400000) 150#define GMT_D_800(x) ((x) & 0x00200000) 151/* #define GMT_ ? ((x) & 0x00100000) */ 152/* #define GMT_ ? ((x) & 0x00080000) */ 153#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* door open (no tape) */ 154/* #define GMT_ ? ((x) & 0x00020000) */ 155#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* immediate report mode */ 156#define GMT_CLN(x) ((x) & 0x00008000) /* cleaning requested */ 157/* 15 generic status bits unused */ 158 159 160/* SCSI-tape specific definitions */ 161/* Bitfield shifts in the status */ 162#define MT_ST_BLKSIZE_SHIFT 0 163#define MT_ST_BLKSIZE_MASK 0xffffff 164#define MT_ST_DENSITY_SHIFT 24 165#define MT_ST_DENSITY_MASK 0xff000000 166 167#define MT_ST_SOFTERR_SHIFT 0 168#define MT_ST_SOFTERR_MASK 0xffff 169 170/* Bitfields for the MTSETDRVBUFFER ioctl */ 171#define MT_ST_OPTIONS 0xf0000000 172#define MT_ST_BOOLEANS 0x10000000 173#define MT_ST_SETBOOLEANS 0x30000000 174#define MT_ST_CLEARBOOLEANS 0x40000000 175#define MT_ST_WRITE_THRESHOLD 0x20000000 176#define MT_ST_DEF_BLKSIZE 0x50000000 177#define MT_ST_DEF_OPTIONS 0x60000000 178#define MT_ST_TIMEOUTS 0x70000000 179#define MT_ST_SET_TIMEOUT (MT_ST_TIMEOUTS | 0x000000) 180#define MT_ST_SET_LONG_TIMEOUT (MT_ST_TIMEOUTS | 0x100000) 181#define MT_ST_SET_CLN 0x80000000 182 183#define MT_ST_BUFFER_WRITES 0x1 184#define MT_ST_ASYNC_WRITES 0x2 185#define MT_ST_READ_AHEAD 0x4 186#define MT_ST_DEBUGGING 0x8 187#define MT_ST_TWO_FM 0x10 188#define MT_ST_FAST_MTEOM 0x20 189#define MT_ST_AUTO_LOCK 0x40 190#define MT_ST_DEF_WRITES 0x80 191#define MT_ST_CAN_BSR 0x100 192#define MT_ST_NO_BLKLIMS 0x200 193#define MT_ST_CAN_PARTITIONS 0x400 194#define MT_ST_SCSI2LOGICAL 0x800 195#define MT_ST_SYSV 0x1000 196#define MT_ST_NOWAIT 0x2000 197#define MT_ST_SILI 0x4000 198#define MT_ST_NOWAIT_EOF 0x8000 199 200/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */ 201#define MT_ST_CLEAR_DEFAULT 0xfffff 202#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000) 203#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000) 204#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000) 205 206/* The offset for the arguments for the special HP changer load command. */ 207#define MT_ST_HPLOADER_OFFSET 10000 208 209#endif /* _LINUX_MTIO_H */