usbif.h (16888B)
1/* SPDX-License-Identifier: MIT */ 2 3/* 4 * usbif.h 5 * 6 * USB I/O interface for Xen guest OSes. 7 * 8 * Copyright (C) 2009, FUJITSU LABORATORIES LTD. 9 * Author: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> 10 */ 11 12#ifndef __XEN_PUBLIC_IO_USBIF_H__ 13#define __XEN_PUBLIC_IO_USBIF_H__ 14 15#include "ring.h" 16#include "../grant_table.h" 17 18/* 19 * Detailed Interface Description 20 * ============================== 21 * The pvUSB interface is using a split driver design: a frontend driver in 22 * the guest and a backend driver in a driver domain (normally dom0) having 23 * access to the physical USB device(s) being passed to the guest. 24 * 25 * The frontend and backend drivers use XenStore to initiate the connection 26 * between them, the I/O activity is handled via two shared ring pages and an 27 * event channel. As the interface between frontend and backend is at the USB 28 * host connector level, multiple (up to 31) physical USB devices can be 29 * handled by a single connection. 30 * 31 * The Xen pvUSB device name is "qusb", so the frontend's XenStore entries are 32 * to be found under "device/qusb", while the backend's XenStore entries are 33 * under "backend/<guest-dom-id>/qusb". 34 * 35 * When a new pvUSB connection is established, the frontend needs to setup the 36 * two shared ring pages for communication and the event channel. The ring 37 * pages need to be made available to the backend via the grant table 38 * interface. 39 * 40 * One of the shared ring pages is used by the backend to inform the frontend 41 * about USB device plug events (device to be added or removed). This is the 42 * "conn-ring". 43 * 44 * The other ring page is used for USB I/O communication (requests and 45 * responses). This is the "urb-ring". 46 * 47 * Feature and Parameter Negotiation 48 * ================================= 49 * The two halves of a Xen pvUSB driver utilize nodes within the XenStore to 50 * communicate capabilities and to negotiate operating parameters. This 51 * section enumerates these nodes which reside in the respective front and 52 * backend portions of the XenStore, following the XenBus convention. 53 * 54 * Any specified default value is in effect if the corresponding XenBus node 55 * is not present in the XenStore. 56 * 57 * XenStore nodes in sections marked "PRIVATE" are solely for use by the 58 * driver side whose XenBus tree contains them. 59 * 60 ***************************************************************************** 61 * Backend XenBus Nodes 62 ***************************************************************************** 63 * 64 *------------------ Backend Device Identification (PRIVATE) ------------------ 65 * 66 * num-ports 67 * Values: unsigned [1...31] 68 * 69 * Number of ports for this (virtual) USB host connector. 70 * 71 * usb-ver 72 * Values: unsigned [1...2] 73 * 74 * USB version of this host connector: 1 = USB 1.1, 2 = USB 2.0. 75 * 76 * port/[1...31] 77 * Values: string 78 * 79 * Physical USB device connected to the given port, e.g. "3-1.5". 80 * 81 ***************************************************************************** 82 * Frontend XenBus Nodes 83 ***************************************************************************** 84 * 85 *----------------------- Request Transport Parameters ----------------------- 86 * 87 * event-channel 88 * Values: unsigned 89 * 90 * The identifier of the Xen event channel used to signal activity 91 * in the ring buffer. 92 * 93 * urb-ring-ref 94 * Values: unsigned 95 * 96 * The Xen grant reference granting permission for the backend to map 97 * the sole page in a single page sized ring buffer. This is the ring 98 * buffer for urb requests. 99 * 100 * conn-ring-ref 101 * Values: unsigned 102 * 103 * The Xen grant reference granting permission for the backend to map 104 * the sole page in a single page sized ring buffer. This is the ring 105 * buffer for connection/disconnection requests. 106 * 107 * protocol 108 * Values: string (XEN_IO_PROTO_ABI_*) 109 * Default Value: XEN_IO_PROTO_ABI_NATIVE 110 * 111 * The machine ABI rules governing the format of all ring request and 112 * response structures. 113 * 114 * Protocol Description 115 * ==================== 116 * 117 *-------------------------- USB device plug events -------------------------- 118 * 119 * USB device plug events are send via the "conn-ring" shared page. As only 120 * events are being sent, the respective requests from the frontend to the 121 * backend are just dummy ones. 122 * The events sent to the frontend have the following layout: 123 * 0 1 2 3 octet 124 * +----------------+----------------+----------------+----------------+ 125 * | id | portnum | speed | 4 126 * +----------------+----------------+----------------+----------------+ 127 * id - uint16_t, event id (taken from the actual frontend dummy request) 128 * portnum - uint8_t, port number (1 ... 31) 129 * speed - uint8_t, device XENUSB_SPEED_*, XENUSB_SPEED_NONE == unplug 130 * 131 * The dummy request: 132 * 0 1 octet 133 * +----------------+----------------+ 134 * | id | 2 135 * +----------------+----------------+ 136 * id - uint16_t, guest supplied value (no need for being unique) 137 * 138 *-------------------------- USB I/O request --------------------------------- 139 * 140 * A single USB I/O request on the "urb-ring" has the following layout: 141 * 0 1 2 3 octet 142 * +----------------+----------------+----------------+----------------+ 143 * | id | nr_buffer_segs | 4 144 * +----------------+----------------+----------------+----------------+ 145 * | pipe | 8 146 * +----------------+----------------+----------------+----------------+ 147 * | transfer_flags | buffer_length | 12 148 * +----------------+----------------+----------------+----------------+ 149 * | request type specific | 16 150 * | data | 20 151 * +----------------+----------------+----------------+----------------+ 152 * | seg[0] | 24 153 * | data | 28 154 * +----------------+----------------+----------------+----------------+ 155 * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| 156 * +----------------+----------------+----------------+----------------+ 157 * | seg[XENUSB_MAX_SEGMENTS_PER_REQUEST - 1] | 144 158 * | data | 148 159 * +----------------+----------------+----------------+----------------+ 160 * Bit field bit number 0 is always least significant bit, undefined bits must 161 * be zero. 162 * id - uint16_t, guest supplied value 163 * nr_buffer_segs - uint16_t, number of segment entries in seg[] array 164 * pipe - uint32_t, bit field with multiple information: 165 * bits 0-4: port request to send to 166 * bit 5: unlink request with specified id (cancel I/O) if set (see below) 167 * bit 7: direction (1 = read from device) 168 * bits 8-14: device number on port 169 * bits 15-18: endpoint of device 170 * bits 30-31: request type: 00 = isochronous, 01 = interrupt, 171 * 10 = control, 11 = bulk 172 * transfer_flags - uint16_t, bit field with processing flags: 173 * bit 0: less data than specified allowed 174 * buffer_length - uint16_t, total length of data 175 * request type specific data - 8 bytes, see below 176 * seg[] - array with 8 byte elements, see below 177 * 178 * Request type specific data for isochronous request: 179 * 0 1 2 3 octet 180 * +----------------+----------------+----------------+----------------+ 181 * | interval | start_frame | 4 182 * +----------------+----------------+----------------+----------------+ 183 * | number_of_packets | nr_frame_desc_segs | 8 184 * +----------------+----------------+----------------+----------------+ 185 * interval - uint16_t, time interval in msecs between frames 186 * start_frame - uint16_t, start frame number 187 * number_of_packets - uint16_t, number of packets to transfer 188 * nr_frame_desc_segs - uint16_t number of seg[] frame descriptors elements 189 * 190 * Request type specific data for interrupt request: 191 * 0 1 2 3 octet 192 * +----------------+----------------+----------------+----------------+ 193 * | interval | 0 | 4 194 * +----------------+----------------+----------------+----------------+ 195 * | 0 | 8 196 * +----------------+----------------+----------------+----------------+ 197 * interval - uint16_t, time in msecs until interruption 198 * 199 * Request type specific data for control request: 200 * 0 1 2 3 octet 201 * +----------------+----------------+----------------+----------------+ 202 * | data of setup packet | 4 203 * | | 8 204 * +----------------+----------------+----------------+----------------+ 205 * 206 * Request type specific data for bulk request: 207 * 0 1 2 3 octet 208 * +----------------+----------------+----------------+----------------+ 209 * | 0 | 4 210 * | 0 | 8 211 * +----------------+----------------+----------------+----------------+ 212 * 213 * Request type specific data for unlink request: 214 * 0 1 2 3 octet 215 * +----------------+----------------+----------------+----------------+ 216 * | unlink_id | 0 | 4 217 * +----------------+----------------+----------------+----------------+ 218 * | 0 | 8 219 * +----------------+----------------+----------------+----------------+ 220 * unlink_id - uint16_t, request id of request to terminate 221 * 222 * seg[] array element layout: 223 * 0 1 2 3 octet 224 * +----------------+----------------+----------------+----------------+ 225 * | gref | 4 226 * +----------------+----------------+----------------+----------------+ 227 * | offset | length | 8 228 * +----------------+----------------+----------------+----------------+ 229 * gref - uint32_t, grant reference of buffer page 230 * offset - uint16_t, offset of buffer start in page 231 * length - uint16_t, length of buffer in page 232 * 233 *-------------------------- USB I/O response -------------------------------- 234 * 235 * 0 1 2 3 octet 236 * +----------------+----------------+----------------+----------------+ 237 * | id | start_frame | 4 238 * +----------------+----------------+----------------+----------------+ 239 * | status | 8 240 * +----------------+----------------+----------------+----------------+ 241 * | actual_length | 12 242 * +----------------+----------------+----------------+----------------+ 243 * | error_count | 16 244 * +----------------+----------------+----------------+----------------+ 245 * id - uint16_t, id of the request this response belongs to 246 * start_frame - uint16_t, start_frame this response (iso requests only) 247 * status - int32_t, XENUSB_STATUS_* (non-iso requests) 248 * actual_length - uint32_t, actual size of data transferred 249 * error_count - uint32_t, number of errors (iso requests) 250 */ 251 252enum xenusb_spec_version { 253 XENUSB_VER_UNKNOWN = 0, 254 XENUSB_VER_USB11, 255 XENUSB_VER_USB20, 256 XENUSB_VER_USB30, /* not supported yet */ 257}; 258 259/* 260 * USB pipe in xenusb_request 261 * 262 * - port number: bits 0-4 263 * (USB_MAXCHILDREN is 31) 264 * 265 * - operation flag: bit 5 266 * (0 = submit urb, 267 * 1 = unlink urb) 268 * 269 * - direction: bit 7 270 * (0 = Host-to-Device [Out] 271 * 1 = Device-to-Host [In]) 272 * 273 * - device address: bits 8-14 274 * 275 * - endpoint: bits 15-18 276 * 277 * - pipe type: bits 30-31 278 * (00 = isochronous, 01 = interrupt, 279 * 10 = control, 11 = bulk) 280 */ 281 282#define XENUSB_PIPE_PORT_MASK 0x0000001f 283#define XENUSB_PIPE_UNLINK 0x00000020 284#define XENUSB_PIPE_DIR 0x00000080 285#define XENUSB_PIPE_DEV_MASK 0x0000007f 286#define XENUSB_PIPE_DEV_SHIFT 8 287#define XENUSB_PIPE_EP_MASK 0x0000000f 288#define XENUSB_PIPE_EP_SHIFT 15 289#define XENUSB_PIPE_TYPE_MASK 0x00000003 290#define XENUSB_PIPE_TYPE_SHIFT 30 291#define XENUSB_PIPE_TYPE_ISOC 0 292#define XENUSB_PIPE_TYPE_INT 1 293#define XENUSB_PIPE_TYPE_CTRL 2 294#define XENUSB_PIPE_TYPE_BULK 3 295 296#define xenusb_pipeportnum(pipe) ((pipe) & XENUSB_PIPE_PORT_MASK) 297#define xenusb_setportnum_pipe(pipe, portnum) ((pipe) | (portnum)) 298 299#define xenusb_pipeunlink(pipe) ((pipe) & XENUSB_PIPE_UNLINK) 300#define xenusb_pipesubmit(pipe) (!xenusb_pipeunlink(pipe)) 301#define xenusb_setunlink_pipe(pipe) ((pipe) | XENUSB_PIPE_UNLINK) 302 303#define xenusb_pipein(pipe) ((pipe) & XENUSB_PIPE_DIR) 304#define xenusb_pipeout(pipe) (!xenusb_pipein(pipe)) 305 306#define xenusb_pipedevice(pipe) \ 307 (((pipe) >> XENUSB_PIPE_DEV_SHIFT) & XENUSB_PIPE_DEV_MASK) 308 309#define xenusb_pipeendpoint(pipe) \ 310 (((pipe) >> XENUSB_PIPE_EP_SHIFT) & XENUSB_PIPE_EP_MASK) 311 312#define xenusb_pipetype(pipe) \ 313 (((pipe) >> XENUSB_PIPE_TYPE_SHIFT) & XENUSB_PIPE_TYPE_MASK) 314#define xenusb_pipeisoc(pipe) (xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_ISOC) 315#define xenusb_pipeint(pipe) (xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_INT) 316#define xenusb_pipectrl(pipe) (xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_CTRL) 317#define xenusb_pipebulk(pipe) (xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_BULK) 318 319#define XENUSB_MAX_SEGMENTS_PER_REQUEST (16) 320#define XENUSB_MAX_PORTNR 31 321#define XENUSB_RING_SIZE 4096 322 323/* 324 * RING for transferring urbs. 325 */ 326struct xenusb_request_segment { 327 grant_ref_t gref; 328 uint16_t offset; 329 uint16_t length; 330}; 331 332struct xenusb_urb_request { 333 uint16_t id; /* request id */ 334 uint16_t nr_buffer_segs; /* number of urb->transfer_buffer segments */ 335 336 /* basic urb parameter */ 337 uint32_t pipe; 338 uint16_t transfer_flags; 339#define XENUSB_SHORT_NOT_OK 0x0001 340 uint16_t buffer_length; 341 union { 342 uint8_t ctrl[8]; /* setup_packet (Ctrl) */ 343 344 struct { 345 uint16_t interval; /* maximum (1024*8) in usb core */ 346 uint16_t start_frame; /* start frame */ 347 uint16_t number_of_packets; /* number of ISO packet */ 348 uint16_t nr_frame_desc_segs; /* number of iso_frame_desc segments */ 349 } isoc; 350 351 struct { 352 uint16_t interval; /* maximum (1024*8) in usb core */ 353 uint16_t pad[3]; 354 } intr; 355 356 struct { 357 uint16_t unlink_id; /* unlink request id */ 358 uint16_t pad[3]; 359 } unlink; 360 361 } u; 362 363 /* urb data segments */ 364 struct xenusb_request_segment seg[XENUSB_MAX_SEGMENTS_PER_REQUEST]; 365}; 366 367struct xenusb_urb_response { 368 uint16_t id; /* request id */ 369 uint16_t start_frame; /* start frame (ISO) */ 370 int32_t status; /* status (non-ISO) */ 371#define XENUSB_STATUS_OK 0 372#define XENUSB_STATUS_NODEV (-19) 373#define XENUSB_STATUS_INVAL (-22) 374#define XENUSB_STATUS_STALL (-32) 375#define XENUSB_STATUS_IOERROR (-71) 376#define XENUSB_STATUS_BABBLE (-75) 377#define XENUSB_STATUS_SHUTDOWN (-108) 378 int32_t actual_length; /* actual transfer length */ 379 int32_t error_count; /* number of ISO errors */ 380}; 381 382DEFINE_RING_TYPES(xenusb_urb, struct xenusb_urb_request, struct xenusb_urb_response); 383#define XENUSB_URB_RING_SIZE __CONST_RING_SIZE(xenusb_urb, XENUSB_RING_SIZE) 384 385/* 386 * RING for notifying connect/disconnect events to frontend 387 */ 388struct xenusb_conn_request { 389 uint16_t id; 390}; 391 392struct xenusb_conn_response { 393 uint16_t id; /* request id */ 394 uint8_t portnum; /* port number */ 395 uint8_t speed; /* usb_device_speed */ 396#define XENUSB_SPEED_NONE 0 397#define XENUSB_SPEED_LOW 1 398#define XENUSB_SPEED_FULL 2 399#define XENUSB_SPEED_HIGH 3 400}; 401 402DEFINE_RING_TYPES(xenusb_conn, struct xenusb_conn_request, struct xenusb_conn_response); 403#define XENUSB_CONN_RING_SIZE __CONST_RING_SIZE(xenusb_conn, XENUSB_RING_SIZE) 404 405#endif /* __XEN_PUBLIC_IO_USBIF_H__ */