p16v.h (14227B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Copyright (c) by James Courtier-Dutton <James@superbug.demon.co.uk> 4 * Driver p16v chips 5 * Version: 0.21 6 * 7 * FEATURES currently supported: 8 * Output fixed at S32_LE, 2 channel to hw:0,0 9 * Rates: 44.1, 48, 96, 192. 10 * 11 * Changelog: 12 * 0.8 13 * Use separate card based buffer for periods table. 14 * 0.9 15 * Use 2 channel output streams instead of 8 channel. 16 * (8 channel output streams might be good for ASIO type output) 17 * Corrected speaker output, so Front -> Front etc. 18 * 0.10 19 * Fixed missed interrupts. 20 * 0.11 21 * Add Sound card model number and names. 22 * Add Analog volume controls. 23 * 0.12 24 * Corrected playback interrupts. Now interrupt per period, instead of half period. 25 * 0.13 26 * Use single trigger for multichannel. 27 * 0.14 28 * Mic capture now works at fixed: S32_LE, 96000Hz, Stereo. 29 * 0.15 30 * Force buffer_size / period_size == INTEGER. 31 * 0.16 32 * Update p16v.c to work with changed alsa api. 33 * 0.17 34 * Update p16v.c to work with changed alsa api. Removed boot_devs. 35 * 0.18 36 * Merging with snd-emu10k1 driver. 37 * 0.19 38 * One stereo channel at 24bit now works. 39 * 0.20 40 * Added better register defines. 41 * 0.21 42 * Split from p16v.c 43 * 44 * BUGS: 45 * Some stability problems when unloading the snd-p16v kernel module. 46 * -- 47 * 48 * TODO: 49 * SPDIF out. 50 * Find out how to change capture sample rates. E.g. To record SPDIF at 48000Hz. 51 * Currently capture fixed at 48000Hz. 52 * 53 * -- 54 * GENERAL INFO: 55 * Model: SB0240 56 * P16V Chip: CA0151-DBS 57 * Audigy 2 Chip: CA0102-IAT 58 * AC97 Codec: STAC 9721 59 * ADC: Philips 1361T (Stereo 24bit) 60 * DAC: CS4382-K (8-channel, 24bit, 192Khz) 61 * 62 * This code was initially based on code from ALSA's emu10k1x.c which is: 63 * Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com> 64 */ 65 66/********************************************************************************************************/ 67/* Audigy2 P16V pointer-offset register set, accessed through the PTR2 and DATA2 registers */ 68/********************************************************************************************************/ 69 70/* The sample rate of the SPDIF outputs is set by modifying a register in the EMU10K2 PTR register A_SPDIF_SAMPLERATE. 71 * The sample rate is also controlled by the same registers that control the rate of the EMU10K2 sample rate converters. 72 */ 73 74/* Initially all registers from 0x00 to 0x3f have zero contents. */ 75#define PLAYBACK_LIST_ADDR 0x00 /* Base DMA address of a list of pointers to each period/size */ 76 /* One list entry: 4 bytes for DMA address, 77 * 4 bytes for period_size << 16. 78 * One list entry is 8 bytes long. 79 * One list entry for each period in the buffer. 80 */ 81#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */ 82#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */ 83#define PLAYBACK_UNKNOWN3 0x03 /* Not used */ 84#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */ 85#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */ 86#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */ 87#define PLAYBACK_FIFO_END_ADDRESS 0x07 /* Playback FIFO end address */ 88#define PLAYBACK_FIFO_POINTER 0x08 /* Playback FIFO pointer and number of valid sound samples in cache */ 89#define PLAYBACK_UNKNOWN9 0x09 /* Not used */ 90#define CAPTURE_DMA_ADDR 0x10 /* Capture DMA address */ 91#define CAPTURE_BUFFER_SIZE 0x11 /* Capture buffer size */ 92#define CAPTURE_POINTER 0x12 /* Capture buffer pointer. Sample currently in ADC */ 93#define CAPTURE_FIFO_POINTER 0x13 /* Capture FIFO pointer and number of valid sound samples in cache */ 94#define CAPTURE_P16V_VOLUME1 0x14 /* Low: Capture volume 0xXXXX3030 */ 95#define CAPTURE_P16V_VOLUME2 0x15 /* High:Has no effect on capture volume */ 96#define CAPTURE_P16V_SOURCE 0x16 /* P16V source select. Set to 0x0700E4E5 for AC97 CAPTURE */ 97 /* [0:1] Capture input 0 channel select. 0 = Capture output 0. 98 * 1 = Capture output 1. 99 * 2 = Capture output 2. 100 * 3 = Capture output 3. 101 * [3:2] Capture input 1 channel select. 0 = Capture output 0. 102 * 1 = Capture output 1. 103 * 2 = Capture output 2. 104 * 3 = Capture output 3. 105 * [5:4] Capture input 2 channel select. 0 = Capture output 0. 106 * 1 = Capture output 1. 107 * 2 = Capture output 2. 108 * 3 = Capture output 3. 109 * [7:6] Capture input 3 channel select. 0 = Capture output 0. 110 * 1 = Capture output 1. 111 * 2 = Capture output 2. 112 * 3 = Capture output 3. 113 * [9:8] Playback input 0 channel select. 0 = Play output 0. 114 * 1 = Play output 1. 115 * 2 = Play output 2. 116 * 3 = Play output 3. 117 * [11:10] Playback input 1 channel select. 0 = Play output 0. 118 * 1 = Play output 1. 119 * 2 = Play output 2. 120 * 3 = Play output 3. 121 * [13:12] Playback input 2 channel select. 0 = Play output 0. 122 * 1 = Play output 1. 123 * 2 = Play output 2. 124 * 3 = Play output 3. 125 * [15:14] Playback input 3 channel select. 0 = Play output 0. 126 * 1 = Play output 1. 127 * 2 = Play output 2. 128 * 3 = Play output 3. 129 * [19:16] Playback mixer output enable. 1 bit per channel. 130 * [23:20] Capture mixer output enable. 1 bit per channel. 131 * [26:24] FX engine channel capture 0 = 0x60-0x67. 132 * 1 = 0x68-0x6f. 133 * 2 = 0x70-0x77. 134 * 3 = 0x78-0x7f. 135 * 4 = 0x80-0x87. 136 * 5 = 0x88-0x8f. 137 * 6 = 0x90-0x97. 138 * 7 = 0x98-0x9f. 139 * [31:27] Not used. 140 */ 141 142 /* 0x1 = capture on. 143 * 0x100 = capture off. 144 * 0x200 = capture off. 145 * 0x1000 = capture off. 146 */ 147#define CAPTURE_RATE_STATUS 0x17 /* Capture sample rate. Read only */ 148 /* [15:0] Not used. 149 * [18:16] Channel 0 Detected sample rate. 0 - 44.1khz 150 * 1 - 48 khz 151 * 2 - 96 khz 152 * 3 - 192 khz 153 * 7 - undefined rate. 154 * [19] Channel 0. 1 - Valid, 0 - Not Valid. 155 * [22:20] Channel 1 Detected sample rate. 156 * [23] Channel 1. 1 - Valid, 0 - Not Valid. 157 * [26:24] Channel 2 Detected sample rate. 158 * [27] Channel 2. 1 - Valid, 0 - Not Valid. 159 * [30:28] Channel 3 Detected sample rate. 160 * [31] Channel 3. 1 - Valid, 0 - Not Valid. 161 */ 162/* 0x18 - 0x1f unused */ 163#define PLAYBACK_LAST_SAMPLE 0x20 /* The sample currently being played. Read only */ 164/* 0x21 - 0x3f unused */ 165#define BASIC_INTERRUPT 0x40 /* Used by both playback and capture interrupt handler */ 166 /* Playback (0x1<<channel_id) Don't touch high 16bits. */ 167 /* Capture (0x100<<channel_id). not tested */ 168 /* Start Playback [3:0] (one bit per channel) 169 * Start Capture [11:8] (one bit per channel) 170 * Record source select for channel 0 [18:16] 171 * Record source select for channel 1 [22:20] 172 * Record source select for channel 2 [26:24] 173 * Record source select for channel 3 [30:28] 174 * 0 - SPDIF channel. 175 * 1 - I2S channel. 176 * 2 - SRC48 channel. 177 * 3 - SRCMulti_SPDIF channel. 178 * 4 - SRCMulti_I2S channel. 179 * 5 - SPDIF channel. 180 * 6 - fxengine capture. 181 * 7 - AC97 capture. 182 */ 183 /* Default 41110000. 184 * Writing 0xffffffff hangs the PC. 185 * Writing 0xffff0000 -> 77770000 so it must be some sort of route. 186 * bit 0x1 starts DMA playback on channel_id 0 187 */ 188/* 0x41,42 take values from 0 - 0xffffffff, but have no effect on playback */ 189/* 0x43,0x48 do not remember settings */ 190/* 0x41-45 unused */ 191#define WATERMARK 0x46 /* Test bit to indicate cache level usage */ 192 /* Values it can have while playing on channel 0. 193 * 0000f000, 0000f004, 0000f008, 0000f00c. 194 * Readonly. 195 */ 196/* 0x47-0x4f unused */ 197/* 0x50-0x5f Capture cache data */ 198#define SRCSel 0x60 /* SRCSel. Default 0x4. Bypass P16V 0x14 */ 199 /* [0] 0 = 10K2 audio, 1 = SRC48 mixer output. 200 * [2] 0 = 10K2 audio, 1 = SRCMulti SPDIF mixer output. 201 * [4] 0 = 10K2 audio, 1 = SRCMulti I2S mixer output. 202 */ 203 /* SRC48 converts samples rates 44.1, 48, 96, 192 to 48 khz. */ 204 /* SRCMulti converts 48khz samples rates to 44.1, 48, 96, 192 to 48. */ 205 /* SRC48 and SRCMULTI sample rate select and output select. */ 206 /* 0xffffffff -> 0xC0000015 207 * 0xXXXXXXX4 = Enable Front Left/Right 208 * Enable PCMs 209 */ 210 211/* 0x61 -> 0x6c are Volume controls */ 212#define PLAYBACK_VOLUME_MIXER1 0x61 /* SRC48 Low to mixer input volume control. */ 213#define PLAYBACK_VOLUME_MIXER2 0x62 /* SRC48 High to mixer input volume control. */ 214#define PLAYBACK_VOLUME_MIXER3 0x63 /* SRCMULTI SPDIF Low to mixer input volume control. */ 215#define PLAYBACK_VOLUME_MIXER4 0x64 /* SRCMULTI SPDIF High to mixer input volume control. */ 216#define PLAYBACK_VOLUME_MIXER5 0x65 /* SRCMULTI I2S Low to mixer input volume control. */ 217#define PLAYBACK_VOLUME_MIXER6 0x66 /* SRCMULTI I2S High to mixer input volume control. */ 218#define PLAYBACK_VOLUME_MIXER7 0x67 /* P16V Low to SRCMULTI SPDIF mixer input volume control. */ 219#define PLAYBACK_VOLUME_MIXER8 0x68 /* P16V High to SRCMULTI SPDIF mixer input volume control. */ 220#define PLAYBACK_VOLUME_MIXER9 0x69 /* P16V Low to SRCMULTI I2S mixer input volume control. */ 221 /* 0xXXXX3030 = PCM0 Volume (Front). 222 * 0x3030XXXX = PCM1 Volume (Center) 223 */ 224#define PLAYBACK_VOLUME_MIXER10 0x6a /* P16V High to SRCMULTI I2S mixer input volume control. */ 225 /* 0x3030XXXX = PCM3 Volume (Rear). */ 226#define PLAYBACK_VOLUME_MIXER11 0x6b /* E10K2 Low to SRC48 mixer input volume control. */ 227#define PLAYBACK_VOLUME_MIXER12 0x6c /* E10K2 High to SRC48 mixer input volume control. */ 228 229#define SRC48_ENABLE 0x6d /* SRC48 input audio enable */ 230 /* SRC48 converts samples rates 44.1, 48, 96, 192 to 48 khz. */ 231 /* [23:16] The corresponding P16V channel to SRC48 enabled if == 1. 232 * [31:24] The corresponding E10K2 channel to SRC48 enabled. 233 */ 234#define SRCMULTI_ENABLE 0x6e /* SRCMulti input audio enable. Default 0xffffffff */ 235 /* SRCMulti converts 48khz samples rates to 44.1, 48, 96, 192 to 48. */ 236 /* [7:0] The corresponding P16V channel to SRCMulti_I2S enabled if == 1. 237 * [15:8] The corresponding E10K2 channel to SRCMulti I2S enabled. 238 * [23:16] The corresponding P16V channel to SRCMulti SPDIF enabled. 239 * [31:24] The corresponding E10K2 channel to SRCMulti SPDIF enabled. 240 */ 241 /* Bypass P16V 0xff00ff00 242 * Bitmap. 0 = Off, 1 = On. 243 * P16V playback outputs: 244 * 0xXXXXXXX1 = PCM0 Left. (Front) 245 * 0xXXXXXXX2 = PCM0 Right. 246 * 0xXXXXXXX4 = PCM1 Left. (Center/LFE) 247 * 0xXXXXXXX8 = PCM1 Right. 248 * 0xXXXXXX1X = PCM2 Left. (Unknown) 249 * 0xXXXXXX2X = PCM2 Right. 250 * 0xXXXXXX4X = PCM3 Left. (Rear) 251 * 0xXXXXXX8X = PCM3 Right. 252 */ 253#define AUDIO_OUT_ENABLE 0x6f /* Default: 000100FF */ 254 /* [3:0] Does something, but not documented. Probably capture enable. 255 * [7:4] Playback channels enable. not documented. 256 * [16] AC97 output enable if == 1 257 * [30] 0 = SRCMulti_I2S input from fxengine 0x68-0x6f. 258 * 1 = SRCMulti_I2S input from SRC48 output. 259 * [31] 0 = SRCMulti_SPDIF input from fxengine 0x60-0x67. 260 * 1 = SRCMulti_SPDIF input from SRC48 output. 261 */ 262 /* 0xffffffff -> C00100FF */ 263 /* 0 -> Not playback sound, irq still running */ 264 /* 0xXXXXXX10 = PCM0 Left/Right On. (Front) 265 * 0xXXXXXX20 = PCM1 Left/Right On. (Center/LFE) 266 * 0xXXXXXX40 = PCM2 Left/Right On. (Unknown) 267 * 0xXXXXXX80 = PCM3 Left/Right On. (Rear) 268 */ 269#define PLAYBACK_SPDIF_SELECT 0x70 /* Default: 12030F00 */ 270 /* 0xffffffff -> 3FF30FFF */ 271 /* 0x00000001 pauses stream/irq fail. */ 272 /* All other bits do not effect playback */ 273#define PLAYBACK_SPDIF_SRC_SELECT 0x71 /* Default: 0000E4E4 */ 274 /* 0xffffffff -> F33FFFFF */ 275 /* All bits do not effect playback */ 276#define PLAYBACK_SPDIF_USER_DATA0 0x72 /* SPDIF out user data 0 */ 277#define PLAYBACK_SPDIF_USER_DATA1 0x73 /* SPDIF out user data 1 */ 278/* 0x74-0x75 unknown */ 279#define CAPTURE_SPDIF_CONTROL 0x76 /* SPDIF in control setting */ 280#define CAPTURE_SPDIF_STATUS 0x77 /* SPDIF in status */ 281#define CAPURE_SPDIF_USER_DATA0 0x78 /* SPDIF in user data 0 */ 282#define CAPURE_SPDIF_USER_DATA1 0x79 /* SPDIF in user data 1 */ 283#define CAPURE_SPDIF_USER_DATA2 0x7a /* SPDIF in user data 2 */ 284