wm1250-ev1.c (5997B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Driver for the 1250-EV1 audio I/O module 4 * 5 * Copyright 2011 Wolfson Microelectronics plc 6 */ 7 8#include <linux/init.h> 9#include <linux/module.h> 10#include <linux/slab.h> 11#include <linux/i2c.h> 12#include <linux/gpio.h> 13 14#include <sound/soc.h> 15#include <sound/soc-dapm.h> 16#include <sound/wm1250-ev1.h> 17 18static const char *wm1250_gpio_names[WM1250_EV1_NUM_GPIOS] = { 19 "WM1250 CLK_ENA", 20 "WM1250 CLK_SEL0", 21 "WM1250 CLK_SEL1", 22 "WM1250 OSR", 23 "WM1250 MASTER", 24}; 25 26struct wm1250_priv { 27 struct gpio gpios[WM1250_EV1_NUM_GPIOS]; 28}; 29 30static int wm1250_ev1_set_bias_level(struct snd_soc_component *component, 31 enum snd_soc_bias_level level) 32{ 33 struct wm1250_priv *wm1250 = dev_get_drvdata(component->dev); 34 int ena; 35 36 if (wm1250) 37 ena = wm1250->gpios[WM1250_EV1_GPIO_CLK_ENA].gpio; 38 else 39 ena = -1; 40 41 switch (level) { 42 case SND_SOC_BIAS_ON: 43 break; 44 45 case SND_SOC_BIAS_PREPARE: 46 break; 47 48 case SND_SOC_BIAS_STANDBY: 49 if (ena >= 0) 50 gpio_set_value_cansleep(ena, 1); 51 break; 52 53 case SND_SOC_BIAS_OFF: 54 if (ena >= 0) 55 gpio_set_value_cansleep(ena, 0); 56 break; 57 } 58 59 return 0; 60} 61 62static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = { 63SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0), 64SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0), 65 66SND_SOC_DAPM_INPUT("WM1250 Input"), 67SND_SOC_DAPM_OUTPUT("WM1250 Output"), 68}; 69 70static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = { 71 { "ADC", NULL, "WM1250 Input" }, 72 { "WM1250 Output", NULL, "DAC" }, 73}; 74 75static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream, 76 struct snd_pcm_hw_params *params, 77 struct snd_soc_dai *dai) 78{ 79 struct wm1250_priv *wm1250 = snd_soc_component_get_drvdata(dai->component); 80 81 switch (params_rate(params)) { 82 case 8000: 83 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, 84 1); 85 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, 86 1); 87 break; 88 case 16000: 89 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, 90 0); 91 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, 92 1); 93 break; 94 case 32000: 95 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, 96 1); 97 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, 98 0); 99 break; 100 case 64000: 101 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, 102 0); 103 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, 104 0); 105 break; 106 default: 107 return -EINVAL; 108 } 109 110 return 0; 111} 112 113static const struct snd_soc_dai_ops wm1250_ev1_ops = { 114 .hw_params = wm1250_ev1_hw_params, 115}; 116 117#define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ 118 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000) 119 120static struct snd_soc_dai_driver wm1250_ev1_dai = { 121 .name = "wm1250-ev1", 122 .playback = { 123 .stream_name = "Playback", 124 .channels_min = 1, 125 .channels_max = 2, 126 .rates = WM1250_EV1_RATES, 127 .formats = SNDRV_PCM_FMTBIT_S16_LE, 128 }, 129 .capture = { 130 .stream_name = "Capture", 131 .channels_min = 1, 132 .channels_max = 2, 133 .rates = WM1250_EV1_RATES, 134 .formats = SNDRV_PCM_FMTBIT_S16_LE, 135 }, 136 .ops = &wm1250_ev1_ops, 137}; 138 139static const struct snd_soc_component_driver soc_component_dev_wm1250_ev1 = { 140 .dapm_widgets = wm1250_ev1_dapm_widgets, 141 .num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets), 142 .dapm_routes = wm1250_ev1_dapm_routes, 143 .num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes), 144 .set_bias_level = wm1250_ev1_set_bias_level, 145 .use_pmdown_time = 1, 146 .endianness = 1, 147 .non_legacy_dai_naming = 1, 148}; 149 150static int wm1250_ev1_pdata(struct i2c_client *i2c) 151{ 152 struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev); 153 struct wm1250_priv *wm1250; 154 int i, ret; 155 156 if (!pdata) 157 return 0; 158 159 wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL); 160 if (!wm1250) { 161 ret = -ENOMEM; 162 goto err; 163 } 164 165 for (i = 0; i < ARRAY_SIZE(wm1250->gpios); i++) { 166 wm1250->gpios[i].gpio = pdata->gpios[i]; 167 wm1250->gpios[i].label = wm1250_gpio_names[i]; 168 wm1250->gpios[i].flags = GPIOF_OUT_INIT_LOW; 169 } 170 wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH; 171 wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH; 172 173 ret = gpio_request_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios)); 174 if (ret != 0) { 175 dev_err(&i2c->dev, "Failed to get GPIOs: %d\n", ret); 176 goto err; 177 } 178 179 dev_set_drvdata(&i2c->dev, wm1250); 180 181 return ret; 182 183err: 184 return ret; 185} 186 187static void wm1250_ev1_free(struct i2c_client *i2c) 188{ 189 struct wm1250_priv *wm1250 = dev_get_drvdata(&i2c->dev); 190 191 if (wm1250) 192 gpio_free_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios)); 193} 194 195static int wm1250_ev1_probe(struct i2c_client *i2c) 196{ 197 int id, board, rev, ret; 198 199 dev_set_drvdata(&i2c->dev, NULL); 200 201 board = i2c_smbus_read_byte_data(i2c, 0); 202 if (board < 0) { 203 dev_err(&i2c->dev, "Failed to read ID: %d\n", board); 204 return board; 205 } 206 207 id = (board & 0xfe) >> 2; 208 rev = board & 0x3; 209 210 if (id != 1) { 211 dev_err(&i2c->dev, "Unknown board ID %d\n", id); 212 return -ENODEV; 213 } 214 215 dev_info(&i2c->dev, "revision %d\n", rev + 1); 216 217 ret = wm1250_ev1_pdata(i2c); 218 if (ret != 0) 219 return ret; 220 221 ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_wm1250_ev1, 222 &wm1250_ev1_dai, 1); 223 if (ret != 0) { 224 dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); 225 wm1250_ev1_free(i2c); 226 return ret; 227 } 228 229 return 0; 230} 231 232static int wm1250_ev1_remove(struct i2c_client *i2c) 233{ 234 wm1250_ev1_free(i2c); 235 236 return 0; 237} 238 239static const struct i2c_device_id wm1250_ev1_i2c_id[] = { 240 { "wm1250-ev1", 0 }, 241 { } 242}; 243MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id); 244 245static struct i2c_driver wm1250_ev1_i2c_driver = { 246 .driver = { 247 .name = "wm1250-ev1", 248 }, 249 .probe_new = wm1250_ev1_probe, 250 .remove = wm1250_ev1_remove, 251 .id_table = wm1250_ev1_i2c_id, 252}; 253 254module_i2c_driver(wm1250_ev1_i2c_driver); 255 256MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 257MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver"); 258MODULE_LICENSE("GPL");