summaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen
Commit message (Collapse)AuthorAgeFilesLines
...
* | | Input: wacom_i2c - remove unneeded gpio.h header fileFabio Estevam2019-10-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is no gpio functions used in the driver that is exported by the gpio.h header, so remove this unneeded header. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-3-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: s3c2410_ts - remove unneeded gpio.h header fileFabio Estevam2019-10-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is no gpio functions used in the driver that is exported by the gpio.h header, so remove this unneeded header. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-2-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: colibri-vf50-ts - remove unneeded gpio.h header fileFabio Estevam2019-10-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The touchscreen device is a GPIO consumer, not a GPIO controller, so there is no need to include <linux/gpio.h>. Remove the unneeded header file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Merge tag 'v5.4-rc5' into nextDmitry Torokhov2019-10-273-12/+56
|\ \ \ | | | | | | | | | | | | Sync up with mainline.
| * \ \ Merge branch 'for-linus' of ↵Linus Torvalds2019-10-251-2/+4
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A fix for st1232 driver to properly report coordinates for 2nd and subsequent fingers when more than one is on the surface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: st1232 - fix reporting multitouch coordinates
| | * | Input: st1232 - fix reporting multitouch coordinatesDixit Parmar2019-10-211-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Sitronix st1633 multi-touch controller driver the coordinates reported for multiple fingers were wrong, as it was always taking LSB of coordinates from the first contact data. Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Cc: stable@vger.kernel.org Fixes: 351e0592bfea ("Input: st1232 - add support for st1633") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561 Link: https://lore.kernel.org/r/1566209314-21767-1-git-send-email-dixitparmar19@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2019-10-171-8/+50
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is that we are reverting blanket enablement of SMBus mode for devices with Elan touchpads that report BIOS release date as 2018+ because there are older boxes with updated BIOSes that still do not work well in SMbus mode. We will have to establish whitelist for SMBus mode it looks like" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: elantech - enable SMBus on new (2018+) systems" Input: synaptics-rmi4 - avoid processing unknown IRQs Input: soc_button_array - partial revert of support for newer surface devices Input: goodix - add support for 9-bytes reports Input: da9063 - fix capability and drop KEY_SLEEP
| | * | Input: goodix - add support for 9-bytes reportsYauhen Kharuzhy2019-10-021-8/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some variants of Goodix touchscreen firmwares use 9-bytes finger report format instead of common 8-bytes format. This report format may be present as: struct goodix_contact_data { uint8_t unknown1; uint8_t track_id; uint8_t unknown2; uint16_t x; uint16_t y; uint16_t w; }__attribute__((packed)); Add support for such format and use it for Lenovo Yoga Book notebook (which uses a Goodix touchpad as a touch keyboard). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2019-09-1917-808/+368
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - input core allows hardware drivers to specify a [more precise] timestamp (normally taken in top half) to better track velocity of contacts - input_dev instances now support "polling" mode so that drivers could use the same object for polled and interrupt-driven operation. The plan is to convert existing drivers and retire input_polled_dev API - a new driver for the FlySky FS-iA6B RC receiver - a refresh of BU21013 touchpad driver - w90x900 keyboard and touchpad drivers are removed as the platform is gone - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: sidewinder - make array seq static const, makes object smaller Input: reset device timestamp on sync Input: bu21013_ts - switch to using standard touchscreen properties Input: bu21013_ts - switch to using MT-B (slotted) protocol Input: bu21013_ts - fix suspend when wake source Input: bu21013_ts - use interrupt from I2C client Input: bu21013_ts - remove support for platform data Input: bu21013_ts - convert to using managed resources Input: bu21013_ts - remove useless comments Input: bu21013_ts - annotate supend/resume methods as __maybe_unused Input: bu21013_ts - rename some variables Input: bu21013_ts - convert to use GPIO descriptors ARM: ux500: improve BU21013 touchpad bindings Input: i8042 - enable wakeup on a stable struct device Input: soc_button_array - use platform_device_register_resndata() Input: psmouse - drop all unneeded functions from mouse headers Input: add support for polling to input devices Input: wacom_w8001 - allocate additional space for 'phys' Input: cros_ec_keyb - add back missing mask for event_type Input: remove dev_err() usage after platform_get_irq() ...
| * | | Merge tag 'v5.3-rc4' into patchworkMauro Carvalho Chehab2019-08-121-0/+2
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 5.3-rc4 * tag 'v5.3-rc4': (750 commits) Linux 5.3-rc4 Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang ARM: ep93xx: Mark expected switch fall-through scsi: fas216: Mark expected switch fall-throughs pcmcia: db1xxx_ss: Mark expected switch fall-throughs video: fbdev: omapfb_main: Mark expected switch fall-throughs watchdog: riowd: Mark expected switch fall-through s390/net: Mark expected switch fall-throughs crypto: ux500/crypt: Mark expected switch fall-throughs watchdog: wdt977: Mark expected switch fall-through watchdog: scx200_wdt: Mark expected switch fall-through watchdog: Mark expected switch fall-throughs ARM: signal: Mark expected switch fall-through mfd: omap-usb-host: Mark expected switch fall-throughs mfd: db8500-prcmu: Mark expected switch fall-throughs ARM: OMAP: dma: Mark expected switch fall-throughs ARM: alignment: Mark expected switch fall-throughs ARM: tegra: Mark expected switch fall-through ARM/hw_breakpoint: Mark expected switch fall-throughs mm/memremap: Fix reuse of pgmap instances with internal references ...
| * | | media: input/touchscreen/sur40: use COLORSPACE_RAWHans Verkuil2019-07-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver set the colorspace to SRGB, but that makes no sense for a touchscreen. Use RAW instead. This also ensures consistency with the v4l_pix_format_touch() call that's used in v4l2-ioctl.c. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Florian Echtler <floe@butterbrot.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | | | Input: pixcir_i2c_ts - remove platform dataDmitry Torokhov2019-10-091-75/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previous change moved platform data definition into the driver, making it unusable for users. Given that we want to move away from custom platform data structures, and always use device properties (DT, ACPI or static) to configure devices, let's complete the removal. Tested-by: Fabio Estevam <festevam@gmail.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: pixcir_i2c_ts - do not print error on defer probeFabio Estevam2019-10-091-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of defer probe we should not print an error message. This also aligns with how defer probe is handled in the other GPIOs used by this driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: pixcir_i2c_ts - print register address in decimalFabio Estevam2019-10-091-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pixcir datasheet lists the registers addresses in decimal and so are PIXCIR_REG_POWER_MODE and PIXCIR_REG_INT_MODE defined in decimal. Change the error messages to print the register addresses in decimal instead of hexadecimal for better readability. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: pixcir_i2c_ts - keep header files sortedFabio Estevam2019-10-091-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep the header files in alphabetical order to keep it more organized. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: pixcir_i2c_ts - move definitions into a single fileFabio Estevam2019-10-091-1/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the defined symbols from linux/platform_data/pixcir_i2c_ts.h are only used by the pixcir_i2c_ts driver, so move all the definitions locally and get rid of the pixcir_i2c_ts.h file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: pixcir_i2c_ts - remove unneeded gpio.h header fileFabio Estevam2019-10-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The touchscreen device is a GPIO consumer, not a GPIO controller, so there is no need to include <linux/gpio.h>. Remove the unneeded header file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: atmel_mxt_ts - disable IRQ across suspendEvan Green2019-10-021-0/+4
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Across suspend and resume, we are seeing error messages like the following: atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121) This occurs because the driver leaves its IRQ enabled. Upon resume, there is an IRQ pending, but the interrupt is serviced before both the driver and the underlying I2C bus have been resumed. This causes EREMOTEIO errors. Disable the IRQ in suspend, and re-enable it on resume. If there are cases where the driver enters suspend with interrupts disabled, that's a bug we should fix separately. Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - switch to using standard touchscreen propertiesDmitry Torokhov2019-09-021-21/+33
| | | | | | | | | | | | | | | | | | | | | | | | This switches the driver over to the standard touchscreen properties for coordinate transformation, while keeping old bindings working as well. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - switch to using MT-B (slotted) protocolDmitry Torokhov2019-09-021-37/+43
| | | | | | | | | | | | | | | | | | | | | | | | MT-B protocol is more efficient and everyone expects it. We use in-kernel tracking to identify contacts. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - fix suspend when wake sourceDmitry Torokhov2019-09-021-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the touchscreen is configured as wakeup source we should not be cutting off power to it. Also, now that the driver relies on I2C client to supply IRQ, we do not need to explicitly enable and disable IRQ for wakeup: if device is created as wakeup source, I2C core will mark interrupt as wakeup one. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - use interrupt from I2C clientDmitry Torokhov2019-09-021-16/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of trying to map INT GPIO to interrupt, let's use one supplied by I2C client. If there is none - bail. This will also allow us to treat INT GPIO as optional, as per the binding. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - remove support for platform dataDmitry Torokhov2019-09-021-72/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are no current users of the platform data in the tree, and any new users should either use device tree, or static device properties to describe the device. This change drop the platform data definition and handling and moves the driver over to generic device properties API. We also drop support for the external clock. If it is needed we will have to extend the bindings to supply the clock reference and handle it properly in the driver. Also, wakeup setting should be coming from I2C client. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - convert to using managed resourcesDmitry Torokhov2019-09-021-98/+84
| | | | | | | | | | | | | | | | | | | | | This allows trimming error unwinding and device removal handling. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - remove useless commentsDmitry Torokhov2019-09-021-59/+2
| | | | | | | | | | | | | | | | | | | | | | | | The comments for individual functions in the driver do not provide any additional information beyond what function names indicate. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - annotate supend/resume methods as __maybe_unusedDmitry Torokhov2019-09-021-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | Instead if #ifdef-ing out suspend and resume methods, let's mark them as __maybe_unused to get better compile time coverage. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - rename some variablesDmitry Torokhov2019-09-021-186/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "bu21013_data" and "struct bu21013_ts_data" are a tad long, let's call them "ts" and "struct bu21013_ts". Also rename retval to error in bu21013_init_chip() and adjust formatting; i2c_smbus_write_byte_data() returns negative on error and 0 on success, so we simply test if whether erro is 0 or not. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: bu21013_ts - convert to use GPIO descriptorsLinus Walleij2019-09-021-48/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver can use GPIO descriptors rather than GPIO numbers without any problems, convert it. Name the field variables after the actual pins on the chip rather than the "reset" and "touch" names from the devicetree bindings that are vaguely inaccurate. No in-tree users pass GPIO numbers in platform data so drop this. Descriptor tables can be used to get these GPIOs from a board file if need be. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: wacom_w8001 - allocate additional space for 'phys'Jason Gerecke2019-08-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC warns that the output of our call to 'snprintf' in 'w8001_connect' may be truncated since both 'serio->phys' and 'w8001->phys' are 32 bytes in length. Increase the amount of space allocated for the latter to compensate. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: remove dev_err() usage after platform_get_irq()Stephen Boyd2019-08-145-18/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: edt-ft5x06 - no need to check return value of debugfs_create functionsGreg Kroah-Hartman2019-08-121-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: atmel_mxt_ts - switch to use device_property_count_u32()Andy Shevchenko2019-08-121-2/+1
| | | | | | | | | | | | | | | | | | | | | Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: hideep - switch to use device_property_count_u32()Andy Shevchenko2019-08-121-2/+1
| | | | | | | | | | | | | | | | | | | | | Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Merge tag 'v5.3-rc4' into nextDmitry Torokhov2019-08-114-6/+7
|\ \ \ | | |/ | |/| | | | | | | Sync up with mainline to bring in device_property_count_u32 andother newer APIs.
| * | Merge branch 'for-linus' of ↵Linus Torvalds2019-08-091-0/+2
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - newer systems with Elan touchpads will be switched over to SMBus - HP Spectre X360 will be using SMbus/RMI4 - checks for invalid USB descriptors in kbtab and iforce - build fixes for applespi driver (misconfigs) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: iforce - add sanity checks Input: applespi - use struct_size() helper Input: kbtab - sanity check for endpoint type Input: usbtouchscreen - initialize PM mutex before using it Input: applespi - add dependency on LEDS_CLASS Input: synaptics - enable RMI mode for HP Spectre X360 Input: elantech - annotate fall-through case in elantech_use_host_notify() Input: elantech - enable SMBus on new (2018+) systems Input: applespi - fix trivial typo in struct description Input: applespi - select CRC16 module Input: applespi - fix warnings detected by sparse
| | * Input: usbtouchscreen - initialize PM mutex before using itOliver Neukum2019-08-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mutexes shall be initialized before they are used. Fixes: 12e510dbc57b2 ("Input: usbtouchscreen - fix deadlock in autosuspend") Reported-by: syzbot+199ea16c7f26418b4365@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Merge branch 'for-linus' of ↵Linus Torvalds2019-07-201-2/+1
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch
| | * Merge branch 'next' into for-linusDmitry Torokhov2019-07-2089-595/+90
| | |\ | | | | | | | | | | | | Prepare second round of input updates for 5.3 merge window.
| * | | docs: arm: convert docs to ReST and rename to *.rstMauro Carvalho Chehab2019-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Converts ARM the text files to ReST, preparing them to be an architecture book. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by Corentin Labbe <clabbe.montjoie@gmail.com> # For sun4i-ss
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2019-07-135-45/+77
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad SMBus driver to fetch device parameters (size, resolution) while it is still in PS/2 mode, before switching over to SMBus, as in that mode some devices return garbage dimensions - update to iforce joystick driver - miscellaneous driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits) Input: gpio_keys_polled - allow specifying name of input device Input: edt-ft5x06 - simplify event reporting code Input: max77650-onkey - add MODULE_ALIAS() Input: atmel_mxt_ts - fix leak in mxt_update_cfg() Input: synaptics - enable SMBUS on T480 thinkpad trackpad Input: atmel_mxt_ts - fix -Wunused-const-variable Input: joydev - extend absolute mouse detection HID: quirks: Refactor ELAN 400 and 401 handling Input: elan_i2c - export the device id whitelist Input: edt-ft5x06 - use get_unaligned_be16() Input: iforce - add the Saitek R440 Force Wheel Input: iforce - use unaligned accessors, where appropriate Input: iforce - drop couple of temps from transport code Input: iforce - drop bus type from iforce structure Input: iforce - use DMA-safe buffores for USB transfers Input: iforce - allow callers supply data buffer when fetching device IDs Input: iforce - only call iforce_process_packet() if initialized Input: iforce - signal command completion from transport code Input: iforce - do not combine arguments for iforce_process_packet() Input: iforce - factor out hat handling when parsing packets ...
| | * | Merge branch 'next' into for-linusDmitry Torokhov2019-07-107-97/+92
| | |\ \ | | | | | | | | | | | | | | | Prepare input updates for 5.3 merge window.
| | * | | Input: atmel_mxt_ts - fix leak in mxt_update_cfg()Ian Ray2019-07-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix leak (whose magnitude is the configuration file size) when the CRCs match in mxt_update_cfg(). Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | Merge tag 'media/v5.3-1' of ↵Linus Torvalds2019-07-091-4/+2
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
| | * | | | media: touchscreen/sur40: set device_caps in struct video_deviceHans Verkuil2019-06-121-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. But this only really works if all drivers use this, so convert this touchscreen driver accordingly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Florian Echtler <floe@butterbrot.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | | | | | Input: remove w90x900 touchscreen driverArnd Bergmann2019-08-093-341/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: ads7846 - add support for general touchscreen bindingsMarco Felsch2019-08-091-8/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few vendor specific bindings are now covered by common bindings. Let the driver parse the common bindings to make use of common inverting and swapping mechnism. Aslo make use of touchscreen_report_pos() to ensure the correct inverting-swapping order. The vendor specific properties are used as default (backward compatibility) and gets overwritten by common bindings. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: ts4800-ts - use devm_platform_ioremap_resource()Mukesh Ojha2019-07-241-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: sun4i-ts - use devm_platform_ioremap_resource()Mukesh Ojha2019-07-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: mxs-lradc-ts - use devm_platform_ioremap_resource()Mukesh Ojha2019-07-241-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: fsl-imx25-tcq - use devm_platform_ioremap_resource()Mukesh Ojha2019-07-241-3/+1
| |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-13 13:01:03 +0000