summaryrefslogtreecommitdiffstats
path: root/drivers/input
Commit message (Collapse)AuthorAgeFilesLines
...
| | | * | | | | input: davinci_keyscan: remove unnecessary includesBartosz Golaszewski2019-02-191-4/+0
| | | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mach/ and asm/ includes are not needed in davinci_keyscan, but they will cause build problems once we make mach/irqs.h a private header for mach-davinci. Remove all unused header includes. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2019-02-1711-101/+75
| |\ \ \ \ \ \ | | | |_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - tweaks to Elan drivers (both PS/2 and I2C) to support new devices. Also revert of one of IDs as that device should really be driven by i2c-hid + hid-multitouch - a few drivers have been switched to set_brightness_blocking() call because they either were sleeping the their set_brightness() implementation or used workqueue but were not canceling it on unbind. - ps2-gpio and matrix_keypad needed to [properly] flush their works to avoid potential use-after-free on unbind. - other miscellaneous fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK Input: st-keyscan - fix potential zalloc NULL dereference Input: apanel - switch to using brightness_set_blocking() Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G" Input: qt2160 - switch to using brightness_set_blocking() Input: matrix_keypad - use flush_delayed_work() Input: ps2-gpio - flush TX work when closing port Input: cap11xx - switch to using set_brightness_blocking() Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780 Input: bma150 - register input device after setting private data Input: pwm-vibra - stop regulator after disabling pwm, not before Input: pwm-vibra - prevent unbalanced regulator Input: snvs_pwrkey - allow selecting driver for i.MX 7D
| | * | | | | Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISKMauro Ciancio2019-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by: Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: st-keyscan - fix potential zalloc NULL dereferenceGabriel Fernandez2019-02-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following static checker warning: drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: apanel - switch to using brightness_set_blocking()Dmitry Torokhov2019-02-161-20/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work item. As a bonus, we are no longer forgetting to cancel it when we unbind the driver. Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"Dmitry Torokhov2019-02-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 7db54c89f0b30a101584e09d3729144e6170059d as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: qt2160 - switch to using brightness_set_blocking()Dmitry Torokhov2019-02-111-42/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work items. Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: matrix_keypad - use flush_delayed_work()Dmitry Torokhov2019-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: ps2-gpio - flush TX work when closing portDmitry Torokhov2019-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port. Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Acked-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: cap11xx - switch to using set_brightness_blocking()Dmitry Torokhov2019-02-091-24/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780Matti Kurkela2019-02-071-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: bma150 - register input device after setting private dataJonathan Bakker2019-02-061-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: pwm-vibra - stop regulator after disabling pwm, not beforePaweł Chmiel2019-01-281-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: pwm-vibra - prevent unbalanced regulatorJonathan Bakker2019-01-281-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | Input: snvs_pwrkey - allow selecting driver for i.MX 7DStefan Agner2019-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX SNVS Power Key driver supports the i.MX 7D SoC family too. Allow to enable the i.MX SNVS Power Key driver even if only i.MX 7D SoC is selected. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | | | Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2019-01-311-14/+0
| |\ \ \ \ \ \ | | |_|/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Mostly driver fixes, but there's a core framework fix in here too: - Revert the commits that introduce clk management for the SP clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and there isn't any need to manage this clk, it just causes more headaches. - A performance regression that went unnoticed for many years where we would traverse the entire clk tree looking for a clk by name when we already have the pointer to said clk that we're looking for - A parent linkage fix for the qcom SDM845 clk driver - An i.MX clk driver rate miscalculation fix where order of operations were messed up - One error handling fix from the static checkers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Use active only source for CPUSS clocks clk: ti: Fix error handling in ti_clk_parse_divider_data() clk: imx: Fix fractional clock set rate computation clk: Remove global clk traversal on fetch parent index Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock" Revert "clk: mmp2: add SP clock" Revert "Input: olpc_apsp - enable the SP clock"
| | * | | | | Revert "Input: olpc_apsp - enable the SP clock"Lubomir Rintel2019-01-241-14/+0
| | | |/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Turns out this is not such a great idea. Once the SP clock is disabled, it's not sufficient to just enable in order to bring the SP core back up. It seems that the kernel has no business managing this clock. Just let the firmware keep it enabled. This reverts commit ed22cee91a88c47e564478b012fdbcb079653499. Link: https://lore.kernel.org/lkml/154783267051.169631.3197836544646625747@swboyd.mtv.corp.google.com/ Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * | | | | Merge branch 'for-linus' of ↵Linus Torvalds2019-01-274-4/+9
| |\ \ \ \ \ | | | |/ / / | | |/| / / | | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64
| | * | | Input: olpc_apsp - assign priv->dev earlierLubomir Rintel2019-01-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dev field needs to be set when serio_register_port() is called, because the open callback may use it (in the error handling path). Fixes: commit af518342effd ("Input: olpc_apsp - check FIFO status on open(), not probe()") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | Input: uinput - fix undefined behavior in uinput_validate_absinfo()Dmitry Torokhov2019-01-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by: Kyungtae Kim <kt0755@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | Merge tag 'v4.20' into for-linusDmitry Torokhov2019-01-1438-185/+763
| | |\ \ \ | | | | | | | | | | | | | | | | | | Sync with mainline to get linux/overflow.h among other things.
| | * | | | Input: raspberrypi-ts - fix link errorAnders Roxell2019-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix link error when TOUCHSCREEN_RASPBERRYPI_FW is enabled as a module and the dependent module is built-in. The 'depends on RASPBERRYPI_FIRMWARE' by itself prevents the touchscreen driver from being built-in when the firmware is configured as a module. However, the '|| COMPILE_TEST' still allows it unless we explicitly prevent that configuration with '|| (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)'. ld: drivers/input/touchscreen/raspberrypi-ts.o: in function `rpi_ts_probe': raspberrypi-ts.c:(.text+0x3a8): undefined reference to `rpi_firmware_get' ld: raspberrypi-ts.c:(.text+0x3a8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_get' ld: raspberrypi-ts.c:(.text+0x4c8): undefined reference to `rpi_firmware_property' ld: raspberrypi-ts.c:(.text+0x4c8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_property' Rework so that TOUCHSCREEN_RASPBERRYPI_FW depends on RASPBERRYPI_FIRMWARE=n if COMPILE_TEST is enabled. Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | Input: xpad - add support for SteelSeries Stratus DuoTom Panfil2019-01-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by: Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | | cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain2019-01-081-2/+2
| | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | | | Merge branch 'for-linus' of ↵Linus Torvalds2019-01-0215-99/+312
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
| | * | | Merge branch 'next' into for-linusDmitry Torokhov2018-12-2814-99/+311
| | |\ \ \ | | | | | | | | | | | | | | | | | | Prepare input updates for 4.21 merge window.
| | * | | | Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573GPatrick Dreyer2018-12-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by: Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | | Merge tag 'rtc-4.21' of ↵Linus Torvalds2019-01-011-5/+3
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
| | * | | | | Input: hp_sdc_rtc - Switch to use %ptRAndy Shevchenko2018-12-101-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * | | | | | Merge branch 'parisc-4.21-1' of ↵Linus Torvalds2018-12-262-4/+4
| |\ \ \ \ \ \ | | |_|_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The major change in this patchset is the new system call table generation support from Firoz Khan" * 'parisc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: syscalls: ignore nfsservctl for other architectures parisc: generate uapi header and system call table files parisc: add system call table generation support parisc: remove __NR_Linux from uapi header file. parisc: add __NR_syscalls along with __NR_Linux_syscalls parisc: move __IGNORE* entries to non uapi header parisc: Fix HP SDC hpa address output parisc: Fix serio address output parisc: Split out alternative live patching code
| | * | | | | parisc: Fix HP SDC hpa address outputHelge Deller2018-12-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Show the hpa address of the HP SDC instead of a hashed value, e.g.: HP SDC: HP SDC at 0xf0201000, IRQ 23 (NMI IRQ 24) Signed-off-by: Helge Deller <deller@gmx.de>
| | * | | | | parisc: Fix serio address outputHelge Deller2018-12-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want the hpa addresses printed in the serio modules, not some virtual ioremap()ed address, e.g.: serio: gsc-ps2-keyboard port at 0xf0108000 irq 22 @ 2:0:11 serio: gsc-ps2-mouse port at 0xf0108100 irq 22 @ 2:0:12 Signed-off-by: Helge Deller <deller@gmx.de>
* | | | | | | Input: libps2 - mark expected switch fall-throughGustavo A. R. Silva2019-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/input/serio/libps2.c: In function ‘ps2_handle_ack’: drivers/input/serio/libps2.c:407:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ps2dev->flags & PS2_FLAG_NAK) { ^ drivers/input/serio/libps2.c:417:2: note: here case 0x00: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: qt1050 - add Microchip AT42QT1050 supportMarco Felsch2019-05-073-0/+610
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for the AT42QT1050 (QT1050) device. The device supports up to five input keys, dependent on the mode. Since it adds only the initial support, the "1 to 4 keys plus Guard Channel" mode isn't supported. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: add support for Azoteq IQS550/572/525Jeff LaBundy2019-04-303-0/+1144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Azoteq IQS550/572/525 family of trackpad/touchscreen controllers. The driver has been tested with an IQS550EV02 evaluation board. A demonstration of the driver's capabilities is available here: https://youtu.be/sRNNx4XZBts Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: add a driver for GPIO controllable vibratorsLuca Weiss2019-04-303-0/+220
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a simple driver for GPIO controllable vibrators. It will be used by the Fairphone 2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: synaptics-rmi4 - fix enum_fmtPhilipp Zabel2019-04-261-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not enumerate all formats, some of which the device may not even support. Instead, only report the one fixed format of the currently selected input that will survive try_fmt/s_fmt. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: synaptics-rmi4 - fill initial formatPhilipp Zabel2019-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't set an initial video format until s_input is called: $ v4l2-ctl -d /dev/v4l-touch0 --get-input Video input : 0 (Normalized 16-Bit Image: ok) $ v4l2-ctl -d /dev/v4l-touch0 --get-fmt-video Width/Height : 0/0 Pixel Format : '' [...] $ v4l2-ctl -d /dev/v4l-touch0 --set-input 0 Video input set to 0 (Normalized 16-Bit Image: Touch, ok) $ v4l2-ctl -d /dev/v4l-touch0 --get-fmt-video Width/Height : 71/40 Pixel Format : 'TD16' [...] To fix this, initialize the video format to input 0 during probe. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: hyperv-keyboard - add module descriptionJoseph Salisbury2019-04-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: olpc_apsp - depend on ARCH_MMPJean Delvare2019-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OLPC XO-1.75 and XO-4 are ARM-based laptops, using the Marvell MMP architecture, so don't present this driver on other architectures except for build-testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: sun4i-a10-lradc-keys - add support for A83TZiping Chen2019-04-041-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices. Signed-off-by: Ziping Chen <techping.chan@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify codeAnson Huang2019-04-041-26/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With calling dev_pm_set_wake_irq() to set SNVS ON/OFF button as wakeup source for suspend, generic wake irq mechanism will automatically enable it as wakeup source when suspend, then the enable_irq_wake()/disable_irq_wake() can be removed in suspend/resume callback, it simplifies the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: i8042 - signal wakeup from atkbd/psmouseDmitry Torokhov2019-04-043-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of signalling wakeup directly from i8042, let psmouse and atkbd drivers execute basic protocol handling and only then signal wakeup condition. This solves the issue where we increment wakeup counter simply because we are getting responses from keyboard/mouse to the commands we ourselves send to them as part of suspend transition. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: goodix - add GT5663 CTP supportJagan Teki2019-04-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: goodix - add regulators suppotJagan Teki2019-04-031-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Goodix CTP controllers require AVDD28, VDDIO regulators for power-on sequence. The delay between these regualtor operations as per Power-on Timing from datasheet[1] is 0 (T1 >= 0 usec). So, enable and disable these regulators in proper order using normal regulator functions without any delay in between. [1] GT5663 Datasheet_English_20151106_Rev.01 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: evdev - use struct_size() in kzalloc() and vzalloc()Gustavo A. R. Silva2019-04-031-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: edt-ft5x06 - convert to use SPDX identifierAndy Shevchenko2019-03-031-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. While here, correct MODULE_LICENSE() string to be aligned with license text. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | Input: edt-ft5x06 - enable ACPI enumerationAndy Shevchenko2019-03-031-5/+2
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI allows to enumerate specific devices by using compatible strings. Enable that enumeration for EDT touchscreen devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'YueHaibing2019-02-191-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_suspend': drivers/input/touchscreen/ti_am335x_tsc.c:510:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_resume': drivers/input/touchscreen/ti_am335x_tsc.c:527:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] It's not used any more after 333e07ec4b33 ("Input: ti_am335x_tsc: Mark TSC device as wakeup source") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | Input: i8042 - rework DT node name comparisonsRob Herring2019-02-181-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert string compares of DT node names to use of_node_name_eq helper instead. For the root node on SUN DT, we need to retrieve the 'name' property as it is the rare case where the 'name' property and node name differ. With both changes, it removes direct access to the node name pointer. While at it, convert the open coded loop to use for_each_child_of_node(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-14 16:22:26 +0000