summaryrefslogtreecommitdiffstats
path: root/drivers/phy
Commit message (Collapse)AuthorAgeFilesLines
...
| * phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllersAl Cooper2022-02-251-8/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | Add "wake on" support for the newer Synopsis based XHCI only controller. This works on the 72165 and 72164 and newer chips and does not work on 7216 based systems. Also switch the USB sysclk to a slower clock on suspend to save additional power in S2. The clock switch will only save power on the 72165b0 and newer chips and is a nop on older chips. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220215032422.5179-1-f.fainelli@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy/cadence: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)2022-02-251-6/+1
| | | | | | | | | | | | | | | | | | Use of_device_get_match_data() instead of open-coding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220214020626.1714696-1-chi.minghao@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: sun4i-usb: Add D1 variantSamuel Holland2022-02-251-0/+10
| | | | | | | | | | | | | | | | | | D1 has a register layout like A100 and H616, with the moved SIDDQ bit. Unlike H616 it does not have any dependencies between PHY instances. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220203013558.11490-4-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handlingAndre Przywara2022-02-251-17/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As Icenowy pointed out, newer manuals (starting with H6) actually document the register block at offset 0x800 as "HCI controller and PHY interface", also describe the bits in our "PMU_UNK1" register. Let's put proper names to those "unknown" variables and symbols. While we are at it, generalise the existing code by allowing a bitmap of bits to clear and set, to cover newer SoCs: The A100 and H616 use a different bit for the SIDDQ control. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220203013558.11490-3-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: sun4i-usb: Remove .disc_thresh where not applicableSamuel Holland2022-02-251-1/+0
| | | | | | | | | | | | | | | | | | .disc_thresh is not used when .type = sun50i_h6_phy, so providing a value for it is misleading. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220203013558.11490-2-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: rockchip: add naneng combo phy for RK3568Yifeng Zhao2022-02-243-0/+590
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a combo phy driver for Rockchip SoCs with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220208091326.12495-4-yifeng.zhao@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: qcom: Program SSC only if supported by sinkSankeerth Billakanti2022-02-081-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | Some legacy eDP sinks may not support SSC. The support for SSC is indicated through an opts flag from the controller driver. This change will enable SSC only if the sink supports it. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220207161612.REPOST.v1.3.Ie81d594ec2327dae6410db359cc492484bab171f@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: qcom: Add support for eDP PHY on sc7280Sankeerth Billakanti2022-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | The sc7280 platform supports native eDP controller and PHY. This change will add support for the eDP PHY on sc7280. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220207161612.REPOST.v1.2.Iff75c0ea8499f0baf2aa5800f2c45c4128e2415a@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * phy: cadence: Sierra: Add support for skipping configurationAswath Govindraju2022-02-071-25/+57
| | | | | | | | | | | | | | | | | | | | | | | | In some cases, a single SerDes instance can be shared between two different processors, each using a separate link. In these cases, the SerDes configuration is done in an earlier boot stage. Therefore, add support to skip reconfiguring, if it is was already configured beforehand. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220128072642.29188-1-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * Merge tag 'phy-fixes-5.17' into nextVinod Koul2022-02-0710-27/+75
| |\ | | | | | | | | | | | | Merge phy fixes for 5.17 into next branch to resolve the conflict between fixes and next for upcoming patches
| * | phy: amlogic: meson8b-usb2: fix shared reset control useAmjad Ouled-Ameur2022-01-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use reset_control_rearm() call if an error occurs in case phy_meson8b_usb2_power_on() fails after reset() has been called, or in case phy_meson8b_usb2_power_off() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220111095255.176141-4-aouledameur@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | phy: amlogic: meson8b-usb2: Use dev_err_probe()Amjad Ouled-Ameur2022-01-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the existing dev_err_probe() helper instead of open-coding the same operation. Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220111095255.176141-3-aouledameur@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller useAmjad Ouled-Ameur2022-01-271-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220111095255.176141-2-aouledameur@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | phy: freescale: i.MX8 PHYs should depend on ARCH_MXC && ARM64Geert Uytterhoeven2022-01-271-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Freescale/NXP i.MX8 USB3, MIPI DSI, and PCIE PHYs are only present on the NXP i.MX8 family of SoCs. Hence wrap the config symbols for these PHYs inside a check for ARCH_MXC && ARM64, to prevent asking the user about these drivers when configuring a kernel without NXP i.MX SoC family support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guido Günther <agx@sigxcpu.org> Link: https://lore.kernel.org/r/393868affd830016d35f0d9aba32ccd7098c8073.1641987369.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | phy: qcom-qusb2: Add compatible for MSM8953Luca Weiss2022-01-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add compatible for MSM8953 QUSB2 device which reuses MSM8996 configuration. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220112194118.178026-3-luca@z3ntu.xyz Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | phy: freescale: pcie: cosmetic clean-upMarcel Ziswiler2022-01-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sort includes alphabethically and add a new line before the dt-bindings one as usually done. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Link: https://lore.kernel.org/r/20220113090321.119880-1-marcel@ziswiler.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | drivers: phy: qcom: ipq806x-usb: conver latch function to pool macroAnsuel Smith2022-01-241-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | Convert latch function to readl pool macro to tidy things up. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220117002641.26773-2-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | drivers: phy: qcom: ipq806x-usb: convert to BITFIELD macroAnsuel Smith2022-01-241-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | Convert some define to BITFIELD macro to tidy things up. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220117002641.26773-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | | phy: Remove duplicated include in phy-fsl-lynx-28g.cYang Li2022-03-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following includecheck warning: ./drivers/phy/freescale/phy-fsl-lynx-28g.c: linux/workqueue.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220315235603.59481-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | phy: add support for the Layerscape SerDes 28GIoana Ciornei2022-03-143-0/+635
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new generic PHY driver to support the Lynx 28G SerDes block found on some of the Layerscape SoCs such as LX2160A. At the moment, only the following Ethernet protocols are supported: SGMII/1000Base-X and 10GBaseR. SerDes lanes which are not running an Ethernet protocol or a currently supported Ethenet protocol will be left as it was configured through the RCW (Reset Configuration Word) at boot time. At probe time, the platform driver will read the current configuration of both PLLs found on a SerDes block and will determine what protocols are supported using that PLL. For example, if a PLL is configured to generate a clock net (frate) of 5GHz the only protocols sustained by that PLL are SGMII/1000Base-X (using a quarter of the full clock rate) and QSGMII using the full clock net frequency on the lane. On the .set_mode() callback, the PHY driver will first check if the requested operating mode (protocol) is even supported by the current PLL configuration and will error out if not. Then, the lane is reconfigured to run on the requested protocol. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | phy: dphy: Correct clk_pre parameterLiu Ying2022-02-023-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE parameter's unit is Unit Interval(UI) and the minimum value is 8. Also, kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy mentions that it should be in UI. However, the dphy core driver wrongly sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds. So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE parameter's minimum value according to the D-PHY specification. I'm assuming that all impacted custom drivers shall program values in TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY specification mentions that the frequency of TxByteClkHS is exactly 1/8 the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant custom driver code is changed to program those values as DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options") Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphyWan Jiabing2022-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix following coccicheck warning: ./drivers/phy/mediatek/phy-mtk-tphy.c:994:6-29: duplicated argument to && or || The efuse_rx_imp is duplicate. Here should be efuse_tx_imp. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220107025050.787720-1-wanjiabing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()Dan Carpenter2022-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning. Fixes: 5b1af71280ab ("phy: stm32: rework PLL Lock detection") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220112111724.GB3019@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: xilinx: zynqmp: Fix bus width setting for SGMIIRobert Hancock2022-01-271-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was not preserving the existing register value for other lanes, so enabling the PHY in SGMII mode on one lane zeroed out the settings for all other lanes, causing other PS-GTR peripherals such as USB3 to malfunction. Use xpsgtr_clr_set to only manipulate the desired bits in the register. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: cadence: Sierra: fix error handling bugs in probe()Dan Carpenter2022-01-241-14/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two bugs in the error handling: 1: If devm_of_phy_provider_register() fails then there was no cleanup. 2: The error handling called of_node_put(child) improperly leading to a use after free. We are only holding the reference inside the loop so the last two gotos after the loop lead to a use after free bug. Fix this by cleaning up the partial allocations (or partial iterations) in the loop before doing the goto. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220115115146.GC7552@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: ti: Fix missing sentinel for clk_div_tableKishon Vijay Abraham I2022-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _get_table_maxdiv() tries to access "clk_div_table" array out of bound defined in phy-j721e-wiz.c. Add a sentinel entry to prevent the following global-out-of-bounds error reported by enabling KASAN. [ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148 [ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38 [ 9.565926] [ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360 [ 9.576242] Hardware name: Texas Instruments J721e EVM (DT) [ 9.581832] Workqueue: events_unbound deferred_probe_work_func [ 9.587708] Call trace: [ 9.590174] dump_backtrace+0x20c/0x218 [ 9.594038] show_stack+0x18/0x68 [ 9.597375] dump_stack_lvl+0x9c/0xd8 [ 9.601062] print_address_description.constprop.0+0x78/0x334 [ 9.606830] kasan_report+0x1f0/0x260 [ 9.610517] __asan_load4+0x9c/0xd8 [ 9.614030] _get_maxdiv+0xc0/0x148 [ 9.617540] divider_determine_rate+0x88/0x488 [ 9.622005] divider_round_rate_parent+0xc8/0x124 [ 9.626729] wiz_clk_div_round_rate+0x54/0x68 [ 9.631113] clk_core_determine_round_nolock+0x124/0x158 [ 9.636448] clk_core_round_rate_nolock+0x68/0x138 [ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8 [ 9.645987] clk_set_rate+0x50/0xa8 [ 9.649499] cdns_sierra_phy_init+0x88/0x248 [ 9.653794] phy_init+0x98/0x108 [ 9.657046] cdns_pcie_enable_phy+0xa0/0x170 [ 9.661340] cdns_pcie_init_phy+0x250/0x2b0 [ 9.665546] j721e_pcie_probe+0x4b8/0x798 [ 9.669579] platform_probe+0x8c/0x108 [ 9.673350] really_probe+0x114/0x630 [ 9.677037] __driver_probe_device+0x18c/0x220 [ 9.681505] driver_probe_device+0xac/0x150 [ 9.685712] __device_attach_driver+0xec/0x170 [ 9.690178] bus_for_each_drv+0xf0/0x158 [ 9.694124] __device_attach+0x184/0x210 [ 9.698070] device_initial_probe+0x14/0x20 [ 9.702277] bus_probe_device+0xec/0x100 [ 9.706223] deferred_probe_work_func+0x124/0x180 [ 9.710951] process_one_work+0x4b0/0xbc0 [ 9.714983] worker_thread+0x74/0x5d0 [ 9.718668] kthread+0x214/0x230 [ 9.721919] ret_from_fork+0x10/0x20 [ 9.725520] [ 9.727032] The buggy address belongs to the variable: [ 9.732183] clk_div_table+0x24/0x440 Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: broadcom: Kconfig: Fix PHY_BRCM_USB config optionAl Cooper2022-01-231-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") added a second "default" line for ARCH_BCM_4908 above the original "default" line for ARCH_BRCMSTB. When two "default" lines are used, only the first is used and this change stopped the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB. The fix is to use one "default line with "||". Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | phy: usb: Leave some clocks running during suspendAl Cooper2022-01-231-0/+38
|/ | | | | | | | | | | | | | | | The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all). The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* Merge tag 'char-misc-5.17-rc1' of ↵Linus Torvalds2022-01-1435-582/+4953
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ...
| * Merge tag 'phy-for-5.17' of ↵Greg Kroah-Hartman2021-12-3035-582/+4953
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.17 - New support: - Qualcomm eDP PHY driver - Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support - Lan966x ethernet serdes PHY driver - Support for uniphier NXI & Pro4 SoC - Qualcomm SM6350 USB2 support - Amlogic Meson8 HDMI TX PHY driver - Rockchip rk3568 usb2 support - Intel Thunder Bay eMMC PHY driver - Freescale IMX8 PCIe phy driver - Updates: - Cadence Sierra driver updates for multilink configurations - Bcm usb2 updates for Phy reg space * tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: cadence: Sierra: Add support for derived reference clock output dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration phy: cadence: Sierra: Add support for PHY multilink configurations phy: cadence: Sierra: Fix to get correct parent for mux clocks phy: cadence: Sierra: Update single link PCIe register configuration phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation phy: cadence: Sierra: Check cmn_ready assertion during PHY power on phy: cadence: Sierra: Add PHY PCS common register configurations phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation phy: cadence: Sierra: Add support to get SSC type from device tree dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names phy: cadence: Sierra: Prepare driver to add support for multilink configurations phy: cadence: Sierra: Use of_device_get_match_data() to get driver data phy: mediatek: Fix missing check in mtk_mipi_tx_probe phy: uniphier-usb3ss: fix unintended writing zeros to PHY register phy: phy-mtk-tphy: use new io helpers to access register phy: phy-mtk-xsphy: use new io helpers to access register phy: mediatek: add helpers to update bits of registers ...
| | * phy: cadence: Sierra: Add support for derived reference clock outputSwapnil Jakhade2021-12-271-1/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sierra has derived differential reference clock output which is sourced after the spread spectrum generation has been added. Add support to drive derived reference clock out of serdes. Model this derived clock as a "clock" so that platforms using this can enable it. Sierra Main LC VCO PLL divider 1 clock is programmed to output 100MHz clock output. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-16-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configurationSwapnil Jakhade2021-12-271-1/+376
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add register sequences for PCIe + QSGMII PHY multilink configuration. PHY configuration for multi-link operation is done in two steps. e.g. Consider a case for a 4 lane PHY with PCIe using 2 lanes and QSGMII other 2 lanes. Sierra PHY has 2 PLLs, viz. PLLLC and PLLLC1. So in this case, PLLLC is used for PCIe and PLLLC1 is used for QSGMII. PHY is configured in two steps as described below. [1] For first step, the register values are selected as [TYPE_PCIE][TYPE_QSGMII][ssc]. This will configure PHY registers associated for PCIe involving PLLLC registers and registers for first 2 lanes of PHY. [2] In second step, the register values are selected as [TYPE_QSGMII][TYPE_PCIE][ssc]. This will configure PHY registers associated for QSGMII involving PLLLC1 registers and registers for other 2 lanes of PHY. This completes the PHY configuration for multilink operation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-14-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Add support for PHY multilink configurationsSwapnil Jakhade2021-12-271-8/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for multilink configuration of Sierra PHY. Currently, maximum two links are supported. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-13-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Fix to get correct parent for mux clocksSwapnil Jakhade2021-12-271-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix get_parent() callback to return the correct index of the parent for PLL_CMNLC1 clock. Add a separate table of register values corresponding to the parent index for PLL_CMNLC1. Update set_parent() callback accordingly. Fixes: 28081b72859f ("phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)") Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-12-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Update single link PCIe register configurationSwapnil Jakhade2021-12-271-1/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add single link PCIe register configurations for no SSC and internal SSC. Also, add missing PMA lane registers for external SSC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-11-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operationSwapnil Jakhade2021-12-271-1/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PIPE phy status is used to communicate the completion of several PHY functions. Check if PHY is ready for operation while configured for PIPE mode during startup. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-10-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Check cmn_ready assertion during PHY power onSwapnil Jakhade2021-12-271-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | Check if PMA cmn_ready is set indicating the startup process is complete. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-9-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Add PHY PCS common register configurationsSwapnil Jakhade2021-12-271-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add PHY PCS common register configuration sequences for single link. Update single link PCIe register sequence accordingly. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-8-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra ↵Swapnil Jakhade2021-12-271-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | documentation No functional change. Rename some regmap variables as mentioned in Sierra register description documentation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-7-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Add support to get SSC type from device treeSwapnil Jakhade2021-12-271-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to get SSC type from DT. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-6-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Prepare driver to add support for multilink configurationsSwapnil Jakhade2021-12-271-56/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sierra driver currently supports single link configurations only. Prepare driver to support multilink multiprotocol configurations along with different SSC modes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-3-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: cadence: Sierra: Use of_device_get_match_data() to get driver dataSwapnil Jakhade2021-12-271-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use of_device_get_match_data() to get driver data instead of boilerplate code. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: mediatek: Fix missing check in mtk_mipi_tx_probeMiaoqian Lin2021-12-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The of_device_get_match_data() function may return NULL. Add check to prevent potential null dereference. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211224082103.7658-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: uniphier-usb3ss: fix unintended writing zeros to PHY registerRyuta NAKANISHI2021-12-241-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy parameters"), in function uniphier_u3ssphy_set_param(), unintentionally write zeros to other fields when writing PHY registers. Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC") Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: phy-mtk-tphy: use new io helpers to access registerChunfeng Yun2021-12-241-325/+179
| | | | | | | | | | | | | | | | | | | | | | | | Use new helpers mtk_phy_clear/set/update_bits() to access registers Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-5-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: phy-mtk-xsphy: use new io helpers to access registerChunfeng Yun2021-12-241-94/+46
| | | | | | | | | | | | | | | | | | | | | | | | Use new helpers mtk_phy_clear/set/update_bits() to access registers Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-4-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: mediatek: add helpers to update bits of registersChunfeng Yun2021-12-241-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | Add three helpers mtk_phy_clear/set/update_bits() for registers operation Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-3-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: phy-mtk-tphy: add support efuse settingChunfeng Yun2021-12-241-0/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to some SoCs have a bit shift issue that will drop a bit for usb3 phy or pcie phy, fix it by adding software efuse reading and setting, but only support it optionally for version 2/3. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218082802.5256-2-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: qcom-qmp: Add SM8450 PCIe1 PHY supportDmitry Baryshkov2021-12-242-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two different PCIe PHYs on SM8450, one having one lane (v5) and another with two lanes (v5.20). This commit adds support for the second PCIe phy. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211218141754.503661-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| | * phy: phy-rockchip-inno-usb2: add rk3568 supportPeter Geis2021-12-231-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rk3568 usb2phy is a standalone device with a single muxed interrupt. Add support for the registers to the usb2phy driver. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-7-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-02 03:00:04 +0000