summaryrefslogtreecommitdiffstats
path: root/include/linux/mfd
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | mfd: cros_ec: Add API for EC-EC communicationGwendal Grignou2019-06-101-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow EC to talk to other ECs that are not presented to the host. Neeed when EC are present in detachable keyboard. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add I2C passthru protection APIGwendal Grignou2019-06-101-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent direct i2c access to device behind EC when not in development mode. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add Smart Battery Firmware update APIGwendal Grignou2019-06-101-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add API to update battery firmware. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add Hibernate APIGwendal Grignou2019-06-101-2/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for controlling hibernation of the Embedded Controller. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add API for keyboard testingGwendal Grignou2019-06-101-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add command to allow keyboard testing in factory. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Complete Power and USB PD APIGwendal Grignou2019-06-101-8/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve API for USB Powe delivery and power management. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Fix temperature APIGwendal Grignou2019-06-101-7/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve API to retrieve temperature information. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add fingerprint APIGwendal Grignou2019-06-101-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for fingerprint sensors managed by embedded controller. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Fix event processing APIGwendal Grignou2019-06-101-11/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve API between EC and Host to report events. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Complete MEMS sensor APIGwendal Grignou2019-06-101-58/+406
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new command for batched mode, add support for more sensors. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add EC transport protocol v4Gwendal Grignou2019-06-101-2/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new transport procotol between EC and host. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Expand hash APIGwendal Grignou2019-06-101-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve API to verify EC image signature. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add lightbar v2 APIGwendal Grignou2019-06-101-4/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New API split commands, improve EC command latency. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add PWM_SET_DUTY APIGwendal Grignou2019-06-101-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add API for fan control. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Add Flash V2 commands APIGwendal Grignou2019-06-101-3/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added for supporting larger embedded controller flash. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Remove zero-size structsGwendal Grignou2019-06-101-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Empty structure size is different between C and C++. To prevent clang warning when compiling this include file in C++ programs, remove empty structures. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: move HDMI CEC API definitionGwendal Grignou2019-06-101-73/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move near the end of file. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Update ACPI interface definitionGwendal Grignou2019-06-101-126/+293
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add more fields and improve API when EC presents data through ACPI memory space. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: use BIT macroGwendal Grignou2019-06-101-55/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace (1 << ...) with BIT(). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Define commands as 4-digit UPPER CASE hex valuesGwendal Grignou2019-06-101-99/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is required for compilation of embedded controller firmware to work properly (See CONFIG_HOSTCMD_SECTION_SORTED). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: add ec_align macrosGwendal Grignou2019-06-101-204/+238
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reduce code and improve performance of the embedded controller firmware, pragma __aligned(2) or __aligned(4) are used when alignment to 16 or 32 bit boundary is expected. Define all ec_align to packed when compiling kernel. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: set comments properlyGwendal Grignou2019-06-101-25/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix comments syntax and spelling errors. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Zero BUILD_ macroGwendal Grignou2019-06-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Defined out build macro used when compiling embedded controller firmware. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | | mfd: cros_ec: Update license termGwendal Grignou2019-06-101-15/+5
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Update to SPDX-License-Identifier, GPL-2.0 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | Merge tag 'sound-5.3-rc1' of ↵Linus Torvalds2019-07-091-0/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Many updates in this development cycle are found in ASoC where it got a wide range of changes for the continued refactoring. Some highlights are below. ASoC: - Continued refactoring work by Morimoto-san toward the full componentization; the changes are seen allover the places - Support for force disconnecting muxes in DAPM - Continued development of ASoC Intel SOF stuff - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308 HD-audio: - More fixes and adjustments for ASoC SOF HD-audio - Fix for resume problem on some Realtek codecs USB-audio: - A few fixes for the issues reported by syzbot USB fuzzer - Fix for UAC2 extension unit parser - Quirks for Line6 Helix, Emgaic Unitor 8 FireWire: - Lots of code refactoring and fixes in most of its components" * tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (626 commits) ALSA: firewire-lib: code refactoring for local variables ALSA: firewire-lib: code refactoring for post operation to data block counter ALSA: firewire-lib: code refactoring for error path of parser for CIP header ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER ALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events ALSA: usb-audio: fix Line6 Helix audio format rates firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: dice: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: bebob: fix wrong reference count for stream functionality at error path of rawmidi interface ASoC: SOF: Intel: implement runtime idle for CNL/APL ASoC: SOF: add runtime idle callback ASoC: hdac_hdmi: report codec link up/down status to bus ASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write() ASoC: sunxi: sun50i-codec-analog: Add earpiece ASoC: rt5665: remove redundant assignment to variable idx ...
| * \ \ Merge tag 'v5.2-rc6' into asoc-5.3Mark Brown2019-06-26128-844/+128
| |\ \ \ | | | | | | | | | | | | | | | Linux 5.2-rc6
| * | | | ASoC: madera: Add common support for Cirrus Logic Madera codecsRichard Fitzgerald2019-06-201-0/+4
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Cirrus Logic Madera codecs are a family of related codecs with extensive digital and analogue I/O, digital mixing and routing, signal processing and programmable DSPs. This patch adds common support code shared by all Madera codecs. This patch also adds the pdata to the parent mfd pdata struct. Since there is a circular build dependency it's convenient to patch them both atomically. Signed-off-by: Nariman Poushin <nariman@opensource.cirrus.com> Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com> Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Signed-off-by: Ajit Pandey <ajit.pandey@incubesol.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | Merge tag 'regulator-v5.3' of ↵Linus Torvalds2019-07-095-51/+12
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A couple of new features in the core, the most interesting one being support for complex regulator coupling configurations initially targeted at nVidia Tegra SoCs, and some new drivers but otherwise quite a quiet release. Summary: - Core support for gradual ramping of voltages for devices that can't manage large changes in hardware from Bartosz Golaszewski. - Core support for systems that have complex coupling requirements best described via code, contributed by Dmitry Osipenko. - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST Microelectronics STM32-Booster" * tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: max77650: use vsel_step regulator: implement selector stepping regulator: max77650: add MODULE_ALIAS() regulator: max77620: remove redundant assignment to variable ret dt-bindings: regulator: add support for the stm32-booster regulator: add support for the stm32-booster regulator: s2mps11: Adjust supported buck voltages to real values regulator: s2mps11: Fix buck7 and buck8 wrong voltages gpio: Fix return value mismatch of function gpiod_get_from_of_node() regulator: core: Expose some of core functions needed by couplers regulator: core: Introduce API for regulators coupling customization regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend regulator: s2mps11: Reduce number of rdev_get_id() calls regulator: qcom_spmi: Do NULL check for lvs regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel regulator: da9061/62: Adjust LDO voltage selection minimum value regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure regulator: qcom_spmi: add PMS405 SPMI regulator dt-bindings: qcom_spmi: Document pms405 support arm64: dts: msm8998-mtp: Add pm8005_s1 regulator ...
| * \ \ \ Merge branch 'regulator-5.3' into regulator-nextMark Brown2019-07-044-50/+8
| |\ \ \ \
| | * | | | regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspendKrzysztof Kozlowski2019-06-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver supported turning off regulators in suspend only for S2MPS14 device. However this makes also sense for S2MPS11 and can reduce the power consumption during suspend to RAM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | regulator: da9061/62: Adjust LDO voltage selection minimum valueFelix Riemann2019-06-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the DA9061 and DA9062 datasheets the LDO voltage selection registers have a lower value of 0x02. This applies to voltage registers VLDO1_A, VLDO2_A, VLDO3_A and VLDO4_A. This linear offset of 0x02 was previously not observed by the driver, causing the LDO output voltage to be systematically lower by two steps (= 0.1V). This patch fixes the minimum linear selector offset by setting it to a value of 2 and increases the n_voltages by the same amount allowing voltages in the range 0x02 -> 0.9V to 0x38 -> 3.6V to be correctly selected. Also fixes an incorrect calculaton for the n_voltages value in the regulator LDO2. These fixes effect all LDO regulators for DA9061 and DA9062. Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Felix Riemann <felix.riemann@sma.de> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | Merge tag 'v5.2-rc4' into regulator-5.3Mark Brown2019-06-1894-692/+94
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | Linux 5.2-rc4
| | * | | | | regulator: wm831x: Convert to use GPIO descriptorsLinus Walleij2019-06-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the Wolfson Micro WM831x DCDC converter to use a GPIO descriptor for the GPIO driving the DVS pin. There is just one (non-DT) machine in the kernel using this, and that is the Wolfson Micro (now Cirrus) Cragganmore 6410 so we patch this board to pass a descriptor table and fix up the driver accordingly. Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | regulator: da9063: move definitions out of a header into the driverWolfram Sang2019-05-201-49/+0
| | | |/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Those definitions are only used within the driver meanwhile, so put them there. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | Merge branch 'regulator-5.2' into regulator-linusMark Brown2019-07-042-1/+4
| |\ \ \ \ \ | | |_|_|/ / | |/| | | |
| | * | | | regulator: s2mps11: Adjust supported buck voltages to real valuesKrzysztof Kozlowski2019-07-022-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was registering buck regulators with unsupported range of voltages for S2MPS11 devices. Basically it assumed that all 256 values are possible for a single 8-bit I2C register controlling buck's voltage. This is not true, as datasheet describes subset of these which can be used. For example for buck[12346] the minimum voltage is 650 mV which corresponds to register value of 0x8. The driver was however registering regulator starting at 600 mV, so for a step of 6.25 mV this gave the same result. However this allowed to try to configure regulators to unsupported values. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | | | Merge tag 'leds-for-5.3-rc1' of ↵Linus Torvalds2019-07-092-43/+25
|\ \ \ \ \ \ | |/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
| * | | | | mfd: ti-lmu: Add LM36274 support to the ti-lmuDan Murphy2019-06-062-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the LM36274 register support to the ti-lmu MFD driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
| * | | | | mfd: ti-lmu: Remove support for LM3697Dan Murphy2019-05-242-45/+0
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove support for the LM3697 from the ti-lmu driver in favor of a dedicated LED driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* | | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-1930-125/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 464Thomas Gleixner2019-06-192-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): license terms gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.373849232@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner2019-06-192-24/+2
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450Thomas Gleixner2019-06-052-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published bythe free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190116.345887520@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446Thomas Gleixner2019-06-051-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 30 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 424Thomas Gleixner2019-06-051-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.019014114@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner2019-06-051-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner2019-06-051-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner2019-06-054-58/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner2019-06-051-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 312Thomas Gleixner2019-06-051-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.524820338@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>