summaryrefslogtreecommitdiffstats
path: root/include/media
Commit message (Collapse)AuthorAgeFilesLines
...
* V4L/DVB: Add RC6 support to ir-coreDavid Härdeman2010-05-191-0/+1
| | | | | | | This patch adds an RC6 decoder (modes 0 and 6A) to ir-core. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: move subsystem internal calls to ir-core-priv.hMauro Carvalho Chehab2010-05-191-77/+10
| | | | | | | | | | | | | | | | | | | | ir-core.h has the kABI to be used by the bridge drivers, when needing to register IR protocols and pass IR events. However, the same file also contains IR subsystem internal calls, meant to be used inside ir-core and between ir-core and the raw decoders. Better to move those functions to an internal header, for some reasons: 1) Header will be a little more cleaner; 2) It avoids the need of recompile everything (bridge/hardware drivers, etc), just because a new decoder were added, or some other internal change were needed; 3) Better organize the ir-core API, splitting the functions that are internal to IR core and the ancillary drivers (decoders, lirc_dev) from the features that should be exported to IR subsystem clients. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: Teach drivers/media/IR/ir-raw-event.c to use durationsDavid Härdeman2010-05-191-11/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/media/IR/ir-raw-event.c is currently written with the assumption that all "raw" hardware will generate events only on state change (i.e. when a pulse or space starts). However, some hardware (like mceusb, probably the most popular IR receiver out there) only generates duration data (and that data is buffered so using any kind of timing on the data is futile). Furthermore, using signed int's to represent pulse/space durations is a well-known approach when writing ir decoders. With this patch: - s64 int's are used to represent pulse/space durations in ns - a workqueue is used to decode the ir protocols outside of interrupt context - #defines are added to make decoders clearer - decoder reset is implemented by passing a zero duration to the kfifo queue and decoders are updated accordingly Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Distinguish sysfs attributes for in-hardware and raw decodersMauro Carvalho Chehab2010-05-191-6/+14
| | | | | | | | | | | | | | Some devices have in-hardware Remote Controller decoder, while others need a software decoder to get the IR code. As each software decoder can be enabled/disabled individually, allowing multiple protocol decoding capability. On the other hand, hardware decoders have a limited protocol support, often being able of decoding just one protocol each time. So, each type needs a different set of capabilities to control the supported protocol(s). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Add support for badly-implemented hardware decodersMauro Carvalho Chehab2010-05-192-5/+22
| | | | | | | | | | | | | A few hardware Remote Controller decoders, even using a standard protocol, aren't able to provide the entire scancode. Due to that, the capability of using other IR's are limited on those hardware. Adds a way to indicate to ir-core what are the bits that the hardware provides, from a scancode, allowing the addition of a complete IR table to the kernel and allowing a limited support for changing the Remote Controller on those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: move rc map code to rc-map.hMauro Carvalho Chehab2010-05-192-35/+36
| | | | | | | | | | The keymaps don't need to be recompiled every time a change at ir-core.h happens, since it only depends on rc-map defines. By moving those definitions to the proper header, the code became cleaner, and avoids needing to recompile all the RC maps every time a non-related change is introduced. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L-DVB: ir-core: remove the ancillary bufferMauro Carvalho Chehab2010-05-191-2/+1
| | | | | | | | Now that the decoders are state machine, there's no need to create an ancillary buffer while decoding the protocol. Just call the decoders code directly, event by event. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L-DVB: ir-rc5-decoder: Add a decoder for RC-5 IR protocolMauro Carvalho Chehab2010-05-191-0/+7
| | | | | | | | | This decoder is also based on a state machine, just like the NEC protocol decoder. It is pedantic in the sense that accepts only 14 bits. As there are some variants that outputs less bits, it needs to be improved to also handle those. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: improve keyup/keydown logicDavid Härdeman2010-05-191-5/+10
| | | | | | | | | | | | | | | | | Rewrites the keyup/keydown logic in drivers/media/IR/ir-keytable.c. All knowledge of keystates etc is now internal to ir-keytable.c and not scattered around ir-raw-event.c and ir-nec-decoder.c (where it doesn't belong). In addition, I've changed the API slightly so that ir_input_dev is passed as the first argument rather than input_dev. If we're ever going to support multiple keytables we need to move towards making ir_input_dev the main interface from a driver POV and obscure away the input_dev as an implementational detail in ir-core. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: drivers/media/IR - improve keytable codeDavid Härdeman2010-05-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached patch rewrites much of the keytable code in drivers/media/IR/ir-keytable.c. The scancodes are now inserted into the array in sorted order which allows for a binary search on lookup. The code has also been shrunk by about 150 lines. In addition it fixes the following bugs: Any use of ir_seek_table() was racy. ir_dev->driver_name is leaked between ir_input_register() and ir_input_unregister(). ir_setkeycode() unconditionally does clear_bit() on dev->keybit when removing a mapping, but there might be another mapping with a different scancode and the same keycode. This version has been updated to incorporate patch feedback from Mauro Carvalho Chehab. [mchehab@redhat.com: Fix a conflict with RC keytable breakup patches and input changes] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-common: remove keymap tables from the moduleMauro Carvalho Chehab2010-05-1966-4111/+0
| | | | | | | Now that the remote keymaps were broken into separate modules, get rid of the keycode tables that were hardcoded into ir-common. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Make use of the new IR keymap modulesMauro Carvalho Chehab2010-05-193-4/+102
| | | | | | | | Instead of using the ugly keymap sequences, use the new rc-*.ko keymap files. For now, it is still needed to have one keymap loaded, for the RC code to work. Later patches will remove this depenency. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir: prepare IR code for a parameter change at register functionMauro Carvalho Chehab2010-05-191-6/+20
| | | | | | | A latter patch will reuse the ir_input_register with a different meaning. Before it, change all occurrences to a temporary name. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Add support for RC map code registerMauro Carvalho Chehab2010-05-191-0/+11
| | | | | | | | Instead of having all RC tables hardcoded on one file with all tables there, add infrastructure for registering and dynamically load the table(s) when needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-common: move IR tables from ir-keymaps.c to a separate fileMauro Carvalho Chehab2010-05-1966-85/+4111
| | | | | | | Instead of having one big file with lots of keytables, create one include file for each IR keymap. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-common: Use macros to define the keytablesMauro Carvalho Chehab2010-05-191-1/+13
| | | | | | | | The usage of macros ensures that the proper namespace is being used by all tables. It also makes easier to associate a keytable with the name used inside the drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-common: re-order keytables by name and remove duplicatesMauro Carvalho Chehab2010-05-191-48/+48
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-common: Use a function to declare an IR tableMauro Carvalho Chehab2010-05-191-65/+71
| | | | | | | | This is the first patch of a series of changes that will break the IR tables into a series of small modules that can be dynamically loaded, or just loaded from userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: Add CHIP ID of the uPD61151Dmitri Belimov2010-05-191-0/+5
| | | | | | | Add CHIP ID of the NEC MPEG2 encoders uPD61151 and uPD61152. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Add callbacks for input/evdev open/close on IR coreMauro Carvalho Chehab2010-05-182-0/+3
| | | | | | | | | | Especially when IR needs to do polling, it generates lots of wakeups per second. This makes no sense, if the input event device is closed. Adds a callback handler to the IR hardware driver, to allow registering an open/close ops. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: prepare to add more operations for ir decodersMauro Carvalho Chehab2010-05-181-5/+2
| | | | | | | | | | | | Some decoders and a lirc_dev interface may need some other operations to work. For example: IR device register/unregister and ir_keydown events may need to be tracked. As some operations can occur in interrupt time, and a lock is needed to prevent un-registering a decode while decoding a key, the lock needed to be convert into a spin lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: dynamically load the compiled IR protocolsMauro Carvalho Chehab2010-05-181-5/+24
| | | | | | | | | | | | | | Instead of hardcoding the protocols into ir-core, add a register interface for the IR protocol decoders, and convert ir-nec-decoder into a client of ir-core. With this approach, it is possible to dynamically load the needed IR protocols, and to add a RAW IR interface module, registered as one IR raw protocol decoder. This patch opens a way to register a lirc_dev interface to work as an userspace IR protocol decoder. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: saa7134: don't wait too much to generate an IR event on raw_decodeMauro Carvalho Chehab2010-05-181-0/+2
| | | | | | | | | | | | | | | | | At raw_decode mode, the key is processed after the end of a timer. The previous code resets the timer every time something is received at the IR port. While this works fine with IR's that don't implement repeat, like Avermedia RM-JX IR, it keeps waiting until keydown, on IR's that implement NEC repeat command, like the Terratec yellow. The solution is to change the behaviour to do the timeout after the first received data. The timeout is currently set to 15 ms, as it works fine with NEC protcocol. It may need some adjustments to support other protocols and to better handle spurious detections that may happen with some IR sensors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core/saa7134: Move ir keyup/keydown code to the ir-coreMauro Carvalho Chehab2010-05-181-1/+2
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: add two functions to report keyup/keydown eventsMauro Carvalho Chehab2010-05-181-0/+4
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Add logic to decode IR protocols at the IR coreMauro Carvalho Chehab2010-05-182-0/+35
| | | | | | | | | | | | Adds a method to pass IR raw pulse/code events into ir-core. This is needed in order to support LIRC. It also helps to move common code from the drivers into the core. In order to allow testing, it implements a simple NEC protocol decoder at ir-nec-decoder.c file. The logic is about the same used at saa7134 driver that handles Avermedia M135A and Encore FM53 boards. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: saa7134: add code to allow changing IR protocolMauro Carvalho Chehab2010-05-181-0/+3
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: saa7134: use a full scancode table for M135AMauro Carvalho Chehab2010-05-181-1/+1
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: V4L: vpfe_capture: Add call back function for interrupt clear for ↵Vaibhav Hiremath2010-05-181-0/+2
| | | | | | | | | | | | vpfe_cfg For the devices like AM3517, it is expected that driver clears the interrupt in ISR. Since this is device spcific, callback function added to the platform_data. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: v4l: videobuf: code cleanupPawel Osciak2010-05-183-23/+26
| | | | | | | | Make videobuf pass checkpatch; minor code cleanups. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: Add SPI support to V4L2Dmitri Belimov2010-05-182-0/+21
| | | | | | | | | Add support SPI bus to v4l2. Useful for control some device with SPI bus like hardware MPEG2 encoders and etc. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: v4l2: sort chip IDs in v4l2-chip-ident.hHans Verkuil2010-05-181-58/+62
| | | | | | | | | This list should stay sorted to make it easy to find new ID ranges when adding new chip families. [mchehab@redhat.com: fixed bad whitespacing] Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: export driver name used by IR via ueventMauro Carvalho Chehab2010-05-181-1/+3
| | | | | | | | Now, both driver and keytable names are exported to userspace. This will help userspace to decide when a table need to be replaced by another one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Add a macro to properly create IR tablesMauro Carvalho Chehab2010-05-181-1/+2
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir: use a real device instead of a virtual classMauro Carvalho Chehab2010-05-181-3/+1
| | | | | | | | | | | | | | | | | | | Change the ir-sysfs approach to create irrcv0 as a device, instead of using class_dev. Also, change the way input is registered, in order to make its parent to be the irrcv device. Due to this change, now the event device is created under /sys/class/ir/irrcv class: /sys/class/irrcv/irrcv0/ |-- current_protocol |-- device -> ../../../1-3 |-- input9 | |-- capabilities | | |-- abs ... Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: soc-camera: add runtime pm support for subdevicesMauro Carvalho Chehab2010-05-181-0/+8
| | | | | | | | | | | | To save power soc-camera powers subdevices down, when they are not in use, if this is supported by the platform. However, the V4L standard dictates, that video nodes shall preserve configuration between uses. This requires runtime power management, which is implemented by this patch. It allows subdevice drivers to specify their runtime power-management methods, by assigning a type to the video device. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: The first two parameters of soc_camera_limit_side() are usually ↵Márton Németh2010-05-181-2/+2
| | | | | | | | | | | | | | | | pointers to struct v4l2_rect elements. They are signed, so adjust the prototype accordingly This will remove the following sparse warning (see "make C=1"): * incorrect type in argument 1 (different signedness) expected unsigned int *start got signed int *<noident> as well as a couple more signedness mismatches. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: saa7146: fix regression of the av7110/budget-av driverHans Verkuil2010-05-061-1/+0
| | | | | | | | | | | | | | | | | | | An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too late) caused a new regression in the av7110 driver. Reverted the old fix and fixed the problem in the mxb driver instead. Tested on mxb and budget-av cards. The real problem is that the saa7146 framework has separate probe() and attach() driver callbacks which should be rolled into one. This is now done for the mxb driver, but others should do the same. Lack of hardware makes this hard to do, though. I hope to get hold of some hexium cards and then I can try to improve the framework to prevent this from happening again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-1/+1
|\ | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| * tree-wide: Assorted spelling fixesDaniel Mack2010-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | V4L/DVB: tuner-types: Add Sony BTF-Pxn01Z tuner type used on GigaPocket cardsAndy Walls2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | Sony makes custome tuners for its GigaPocket line of ivtv based capture cards. This adds an entry to the tuner-types list for such tuners. Parameters are based on experiments by Eric Anderson <rico99@sbcglobal.net>. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: V4L - vpfe capture - vpss driver enhancements for DM365Murali Karicheri2010-02-261-1/+40
| | | | | | | | | | | | | | | | | | | | Enhancements to support DM365 ISP5 and VPSS module configuration. Also cleaned up the driver by removing redundant variables. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: V4L - vpfe capture - header files for ISIF driverMurali Karicheri2010-02-261-0/+531
| | | | | | | | | | | | | | | | | | | | | | | | | | This is the header file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: saa7115: fix saa7111a supportHans Verkuil2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | When the saa7111 driver was merged into saa7115 several bugs were introduced, in particular with the saa7111a support as is used in the mxb.c driver. This patch fixes the saa7111a support. This was tested with the mxb driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too lateHans Verkuil2010-02-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | v4l2_device_register needs to be called before the i2c subdevs are loaded. However, it was called afterwards in the saa7146 driver. This caused an oops when loading the mxb and hexium drivers. The vv_init function is now split into two: one registers the v4l2_device, the other does the rest of the initialization. The three drivers that depend on this have been updated to call the new vv_devinit function. Thanks to Michael Hunold for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: Add an entry for Kworld 315U remoteFranklin Meng2010-02-261-0/+1
| | | | | | | | | | Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: Definitions for TVP7002 in DM365Santiago Nunez-Corrales2010-02-261-0/+56
| | | | | | | | | | | | | | | | | | This patch provides the required definitions for the TVP7002 driver in DM365. Signed-off-by: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB: Support for TVP7002 in v4l2 definitionsSantiago Nunez-Corrales2010-02-261-0/+3
| | | | | | | | | | | | | | | | | | This patch provides required chip identification definitions within v4l2. Included only definitions for TVP7002. Signed-off-by: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | soc-camera: add support for VIDIOC_S_PARM and VIDIOC_G_PARM ioctlsGuennadi Liakhovetski2010-02-261-0/+2
| | | | | | | | | | | | | | | | Just pass VIDIOC_S_PARM and VIDIOC_G_PARM down to host drivers. So far no special handling in soc-camera core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | soc-camera: ov772x: Modify buswidth controlKuninori Morimoto2010-02-261-5/+5
| | | | | | | | | | | | | | | | | | | | This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-23 10:28:22 +0000