summaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | recordmcount: Rewrite error/success handlingMatt Helsley2019-08-312-119/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recordmcount uses setjmp/longjmp to manage control flow as it reads and then writes the ELF file. This unusual control flow is hard to follow and check in addition to being unlike kernel coding style. So we rewrite these paths to use regular return values to indicate error/success. When an error or previously-completed object file is found we return an error code following kernel coding conventions -- negative error values and 0 for success when we're not returning a pointer. We return NULL for those that fail and return non-NULL pointers otherwise. One oddity is already_has_rel_mcount -- there we use pointer comparison rather than string comparison to differentiate between previously-processed object files and returning the name of a text section. Link: http://lkml.kernel.org/r/8ba8633d4afe444931f363c8d924bf9565b89a86.1564596289.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
| * | | recordmcount: Remove unused fd from uwrite() and ulseek()Matt Helsley2019-08-312-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uwrite() works within the pseudo-mapping and extends it as necessary without needing the file descriptor (fd) parameter passed to it. Similarly, ulseek() doesn't need its fd parameter. These parameters were only added because the functions bear a conceptual resemblance to write() and lseek(). Worse, they obscure the fact that at the time uwrite() and ulseek() are called fd_map is not a valid file descriptor. Remove the unused file descriptor parameters that make it look like fd_map is still valid. Link: http://lkml.kernel.org/r/2a136e820ee208469d375265c7b8eb28570749a0.1563992889.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
| * | | recordmcount: Remove uread()Matt Helsley2019-08-311-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uread() is only used to initialize the ELF file's pseudo private-memory mapping while uwrite() and ulseek() work within the pseudo-mapping and extend it as necessary. Thus it is not a complementary function to uwrite() and ulseek(). It also makes no sense to do cleanups inside uread() when its only caller, mmap_file(), is doing the relevant allocations and associated initializations. Therefore it's clearer to use a plain read() call to initialize the data in mmap_file() and remove uread(). Link: http://lkml.kernel.org/r/31a87c22b19150cec1c8dc800c8b0873a2741703.1563992889.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
| * | | recordmcount: Remove redundant strcmpMatt Helsley2019-08-311-2/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | The strcmp is unnecessary since .text is already accepted as a prefix in the strncmp(). Link: http://lkml.kernel.org/r/358e590b49adbe4185e161a8b364e323f3d52857.1563992889.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
* | | Merge tag 'kbuild-v5.4' of ↵Linus Torvalds2019-09-2023-355/+450
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
| * | | genksyms: convert to SPDX License Identifier for lex.l and parse.yMasahiro Yamada2019-09-142-44/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I used the C comment style (/* ... */) for the flex and bison files as in Kconfig (scripts/kconfig/{lexer.l,parser.y}) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | modpost: use __section in the output to *.mod.cMasahiro Yamada2019-09-141-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the __section() shorthand. This avoids escaping double-quotes, and improves the readability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | modpost: use MODULE_INFO() for __module_dependsMasahiro Yamada2019-09-141-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes *.mod.c much more readable. I confirmed depmod still produced the same modules.dep file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | export.h, genksyms: do not make genksyms calculate CRC of trimmed symbolsMasahiro Yamada2019-09-141-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Arnd Bergmann reported false-positive modpost warnings detected by his randconfig testing of linux-next. Actually, this happens under the combination of CONFIG_MODVERSIONS and CONFIG_TRIM_UNUSED_KSYMS since commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"). For example, arch/arm/config/multi_v7_defconfig + CONFIG_MODVERSIONS + CONFIG_TRIM_UNUSED_KSYMS produces the following false-positives: WARNING: "__lshrdi3" [vmlinux] is a static (unknown) WARNING: "__ashrdi3" [vmlinux] is a static (unknown) WARNING: "__aeabi_lasr" [vmlinux] is a static (unknown) WARNING: "__aeabi_llsr" [vmlinux] is a static (unknown) WARNING: "ftrace_set_clr_event" [vmlinux] is a static (unknown) WARNING: "__muldi3" [vmlinux] is a static (unknown) WARNING: "__aeabi_ulcmp" [vmlinux] is a static (unknown) WARNING: "__ucmpdi2" [vmlinux] is a static (unknown) WARNING: "__aeabi_lmul" [vmlinux] is a static (unknown) WARNING: "__bswapsi2" [vmlinux] is a static (unknown) WARNING: "__bswapdi2" [vmlinux] is a static (unknown) WARNING: "__ashldi3" [vmlinux] is a static (unknown) WARNING: "__aeabi_llsl" [vmlinux] is a static (unknown) The root cause of the problem is not in the modpost, but in the implementation of CONFIG_TRIM_UNUSED_KSYMS. If there is at least one untrimmed symbol in the file, genksyms is invoked to calculate CRC of *all* the exported symbols in that file even if some of them have been trimmed due to no caller existing. As a result, .tmp_*.ver files contain CRC of trimmed symbols, thus unneeded, orphan __crc* symbols are added to objects. It had been harmless until recently. With commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"), it is now harmful because the bogus __crc* symbols make modpost call sym_update_crc() to add the symbols to the hash table, but there is no one that clears the ->is_static member. I gave Fixes to the first commit that uncovered the issue, but the potential problem has long existed since commit f235541699bc ("export.h: allow for per-symbol configurable EXPORT_SYMBOL()"). Fixes: 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Arnd Bergmann <arnd@arndb.de>
| * | | kbuild: allow Clang to find unused static inline functions for W=1 buildMasahiro Yamada2019-09-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC and Clang have different policy for -Wunused-function; GCC does not warn unused static inline functions at all whereas Clang does if they are defined in source files instead of included headers although it has been suppressed since commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions"). We often miss to delete unused functions where 'static inline' is used in *.c files since there is no tool to detect them. Unused code remains until somebody notices. For example, commit 075ddd75680f ("regulator: core: remove unused rdev_get_supply()"). Let's remove __maybe_unused from the inline macro to allow Clang to start finding unused static inline functions. For now, we do this only for W=1 build since it is not a good idea to sprinkle warnings for the normal build (e.g. 35 warnings for arch/x86/configs/x86_64_defconfig). My initial attempt was to add -Wno-unused-function for no W= build (https://lore.kernel.org/patchwork/patch/1120594/) Nathan Chancellor pointed out that would weaken Clang's checks since we would no longer get -Wunused-function without W=1. It is true GCC would catch unused static non-inline functions, but it would weaken Clang as a standalone compiler, at least. Hence, here is a counter implementation. The current problem is, W=... only controls compiler flags, which are globally effective. There is no way to address only 'static inline' functions. This commit defines KBUILD_EXTRA_WARN[123] corresponding to W=[123]. When KBUILD_EXTRA_WARN1 is defined, __maybe_unused is omitted from the 'inline' macro. The new macro __inline_maybe_unused makes the code a bit uglier, so I hope we can remove it entirely after fixing most of the warnings. If you contribute to code clean-up, please run "make CC=clang W=1" and check -Wunused-function warnings. You will find lots of unused functions. Some of them are false-positives because the call-sites are disabled by #ifdef. I do not like to abuse the inline keyword for suppressing unused-function warnings because it is intended to be a hint for the compiler optimization. I prefer #ifdef around the definition, or __maybe_unused if #ifdef would make the code too ugly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
| * | | kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARNMasahiro Yamada2019-09-064-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KBUILD_ENABLE_EXTRA_GCC_CHECKS started as a switch to add extra warning options for GCC, but now it is a historical misnomer since we use it also for Clang, DTC, and even kernel-doc. Rename it to more sensible, shorter KBUILD_EXTRA_WARN. For the backward compatibility, KBUILD_ENABLE_EXTRA_GCC_CHECKS is still supported (but not advertised in the documentation). I also fixed up 'make help', and updated the documentation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
| * | | kbuild: refactor scripts/Makefile.extrawarnMasahiro Yamada2019-09-061-50/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of the warning-[123] magic, let's accumulate compiler options to KBUILD_CFLAGS directly as the top Makefile does. I think this makes it easier to understand what is going on in this file. This commit slightly changes the behavior, I think all of which are OK. [1] Currently, cc-option calls are needlessly evaluated. For example, warning-3 += $(call cc-option, -Wpacked-bitfield-compat) needs evaluating only when W=3, but it is actually evaluated for W=1, W=2 as well. With this commit, only relevant cc-option calls will be evaluated. This is a slight optimization. [2] Currently, unsupported level like W=4 is checked by: $(error W=$(KBUILD_ENABLE_EXTRA_GCC_CHECKS) is unknown) This will no longer be checked, but I do not think it is a big deal. [3] Currently, 4 Clang warnings (Winitializer-overrides, Wformat, Wsign-compare, Wformat-zero-length) are shown by any of W=1, W=2, and W=3. With this commit, they will be warned only by W=1. I think this is a more correct behavior since each warning belongs to only one group. For understanding this commit correctly: We have 3 warning groups, W=1, W=2, and W=3. You may think W=3 has a higher level than W=1, but they are actually independent. If you like, you can combine them like W=13. To enable all the warnings, you can pass W=123. It is shown by 'make help', but not noticed much. Since we support W= combination, there should not exist intersection among the three groups. If we enable Winitializer-overrides for W=1, we do not need to for W=2 or W=3. This is the reason why I think the change [3] makes sense. The documentation says -Winitializer-overrides is enabled by default. (https://clang.llvm.org/docs/DiagnosticsReference.html#winitializer-overrides) We negate it by passing -Wno-initializer-overrides for the normal build, but we do not do that for W=1. This means, W=1 effectively enables -Winitializer-overrides by the clang's default. The same for the other three. Add comments in case people are confused with the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
| * | | merge_config.sh: ignore unwanted grep errorsGuillaume Tucker2019-09-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The merge_config.sh script verifies that all the config options have their expected value in the resulting file and prints any issues as warnings. These checks aren't intended to be treated as errors given the current implementation. However, since "set -e" was added, if the grep command to look for a config option does not find it the script will then abort prematurely. Handle the case where the grep exit status is non-zero by setting ACTUAL_VAL to an empty string to restore previous functionality. Fixes: cdfca821571d ("merge_config.sh: Check error codes from make") Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)Masahiro Yamada2019-09-043-20/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kbuild provides per-file compiler flag addition/removal: CFLAGS_<basetarget>.o CFLAGS_REMOVE_<basetarget>.o AFLAGS_<basetarget>.o AFLAGS_REMOVE_<basetarget>.o CPPFLAGS_<basetarget>.lds HOSTCFLAGS_<basetarget>.o HOSTCXXFLAGS_<basetarget>.o The <basetarget> is the filename of the target with its directory and suffix stripped. This syntax comes into a trouble when two files with the same basename appear in one Makefile, for example: obj-y += foo.o obj-y += dir/foo.o CFLAGS_foo.o := <some-flags> Here, the <some-flags> applies to both foo.o and dir/foo.o The real world problem is: scripts/kconfig/util.c scripts/kconfig/lxdialog/util.c Both files are compiled into scripts/kconfig/mconf, but only the latter should be given with the ncurses flags. It is more sensible to use the relative path to the Makefile, like this: obj-y += foo.o CFLAGS_foo.o := <some-flags> obj-y += dir/foo.o CFLAGS_dir/foo.o := <other-flags> At first, I attempted to replace $(basetarget) with $*. The $* variable is replaced with the stem ('%') part in a pattern rule. This works with most of cases, but does not for explicit rules. For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own explicit rules, so $* will be empty, resulting in ignoring the per-file AFLAGS. I introduced a new variable, target-stem, which can be used also from explicit rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marc Zyngier <maz@kernel.org>
| * | | modpost: add NOFAIL to strndupDenis Efremov2019-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add NOFAIL check for the strndup call, because the function allocates memory and can return NULL. All calls to strdup in modpost are checked with NOFAIL. Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | modpost: add guid_t type definitionHeikki Krogerus2019-09-041-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since guid_t is the recommended data type for UUIDs in kernel (and I guess uuid_le is meant to be ultimately replaced with it), it should be made available here as well. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: add $(BASH) to run scripts with bash-extensionMasahiro Yamada2019-09-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SHELL falls back to sh when bash is not installed on the system, but nobody is testing such a case since bash is usually installed. So, shell scripts invoked by CONFIG_SHELL are only tested with bash. It makes it difficult to test whether the hashbang #!/bin/sh is real. For example, #!/bin/sh in arch/powerpc/kernel/prom_init_check.sh is false. (I fixed it up) Besides, some shell scripts invoked by CONFIG_SHELL use bash-extension and #!/bin/bash is specified as the hashbang, while CONFIG_SHELL may not always be set to bash. Probably, the right thing to do is to introduce BASH, which is bash by default, and always set CONFIG_SHELL to sh. Replace $(CONFIG_SHELL) with $(BASH) for bash scripts. If somebody tries to add bash-extension to a #!/bin/sh script, it will be caught in testing because /bin/sh is a symlink to dash on some major distributions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: clean up subdir-ymn calculation in Makefile.cleanMasahiro Yamada2019-08-291-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | Remove some variables. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: remove unneeded '+' marker from cmd_cleanMasahiro Yamada2019-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This '+' was added a long time ago: | commit c23e6bf05f7802e92fd3da69a1ed35e56f9c85bb (HEAD) | Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de> | Date: Mon Oct 28 01:16:34 2002 -0600 | | kbuild: Fix a "make -j<N>" warning | | diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean | index 2c843e0380bc..e7c392fd5788 100644 | --- a/scripts/Makefile.clean | +++ b/scripts/Makefile.clean | @@ -42,7 +42,7 @@ quiet_cmd_clean = CLEAN $(obj) | | __clean: $(subdir-ymn) | ifneq ($(strip $(__clean-files) $(clean-rule)),) | - $(call cmd,clean) | + +$(call cmd,clean) | else | @: | endif At that time, cmd_clean contained $(clean-rule), which was able to invoke sub-make. That was why cleaning with the -j option showed: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. It is not the case any more; cmd_clean now just runs the 'rm' command. The '+' marker is pointless. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: remove clean-dirs syntaxMasahiro Yamada2019-08-292-15/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only the difference between clean-files and clean-dirs is the -r option passed to the 'rm' command. You can always pass -r, and then remove the clean-dirs syntax. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: get rid of $(realpath ...) from scripts/mkmakefileMasahiro Yamada2019-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both relative path and absolute path have pros and cons. For example, we can move the source and objtree around together by using the relative path to the source tree. Do not force the absolute path to the source tree. If you prefer the absolute path, you can specify KBUILD_ABS_SRCTREE=1. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: remove unneeded comments and code from scripts/basic/MakefileMasahiro Yamada2019-08-291-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Kbuild descends into scripts/basic/ even before the Kconfig. I do not expect any other host programs added to this Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.packageMasahiro Yamada2019-08-251-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: pkg: add package targets to PHONY instead of FORCEMasahiro Yamada2019-08-251-9/+20
| | | | | | | | | | | | | | | | | | | | | | | | These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: pkg: clean up package files/dirs from the top MakefileMasahiro Yamada2019-08-252-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I am not a big fan of the $(objtree)/ hack for clean-files/clean-dirs. These are created in the top of $(objtree), so let's clean them up from the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | merge_config.sh: Check error codes from makeMark Brown2019-08-221-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we execute make after merging the configurations we ignore any errors it produces causing whatever is running merge_config.sh to be unaware of any failures. This issue was noticed by Guillaume Tucker while looking at problems with testing of clang only builds in KernelCI which caused Kbuild to be unable to find a working host compiler. This implementation was suggested by Yamada-san. Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: move modkern_{c,a}flags to Makefile.lib from Makefile.buildMasahiro Yamada2019-08-223-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makefile.lib is included by Makefile.modfinal as well as Makefile.build. Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c in Makefile.modfinal. Move modkern_cflags as well for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: add CONFIG_ASM_MODVERSIONSMasahiro Yamada2019-08-221-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional nesting in scripts/Makefile.build. scripts/Makefile.build is run every time Kbuild descends into a sub-directory. So, I want to avoid $(wildcard ...) evaluation where possible although computing $(wildcard ...) is so cheap that it may not make measurable performance difference. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | | kbuild: split final module linking out into Makefile.modfinalMasahiro Yamada2019-08-222-68/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I think splitting the modpost and linking modules into separate Makefiles will be useful especially when more complex build steps come in. The main motivation of this commit is to integrate the proposed klp-convert feature cleanly. I moved the logging 'Building modules, stage 2.' to Makefile.modpost to avoid the code duplication although I do not know whether or not this message is needed in the first place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: rebuild modules when module linker scripts are updatedMasahiro Yamada2019-08-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the timestamp of module linker scripts are not checked. Add them to the dependency of modules so they are correctly rebuilt. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: make single targets work more correctlyMasahiro Yamada2019-08-211-6/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the single target build directly descends into the directory of the target. For example, $ make foo/bar/baz.o ... directly descends into foo/bar/. On the other hand, the normal build usually descends one directory at a time, i.e. descends into foo/, and then foo/bar/. This difference causes some problems. [1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles The options in subdir-{as,cc}flags-y take effect in the current and its sub-directories. In other words, they are inherited downward. In the example above, the single target will miss subdir-{as,cc}flags-y if they are defined in foo/Makefile. [2] could be built in a different directory As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can handle files that are spread over several sub-directories. The build rule of foo/bar/baz.o may not necessarily be specified in foo/bar/Makefile. It might be specifies in foo/Makefile as follows: [foo/Makefile] obj-y := bar/baz.o This often happens when a module is so big that its source files are divided into sub-directories. In this case, there is no Makefile in the foo/bar/ directory, yet the single target descends into foo/bar/, then fails due to the missing Makefile. You can still do 'make foo/bar/' for partial building, but cannot do 'make foo/bar/baz.s'. I believe the single target '%.s' is a useful feature for inspecting the compiler output. Some modules work around this issue by putting an empty Makefile in every sub-directory. This commit fixes those problems by making the single target build descend in the same way as the normal build does. Another change is the single target build will observe the CONFIG options. Previously, it allowed users to build the foo.o even when the corresponding CONFIG_FOO is disabled: obj-$(CONFIG_FOO) += foo.o In the new behavior, the single target build will just fail and show "No rule to make target ..." (or "Nothing to be done for ..." if the stale object already exists, but cannot be updated). The disadvantage of this commit is the build speed. Now that the single target build visits every directory and parses lots of Makefiles, it is slower than before. (But, I hope it will not be too slow.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: Parameterize kallsyms generation and correct reportingKees Cook2019-08-211-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When kallsyms generation happens, temporary vmlinux outputs are linked but the quiet make output didn't report it, giving the impression that the prior command is taking longer than expected. Instead, report the linking step explicitly. While at it, this consolidates the repeated "kallsyms generation step" into a single function and removes the existing copy/pasting. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: re-implement detection of CONFIG options leaked to user-spaceMasahiro Yamada2019-08-211-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scripts/headers_check.pl can detect references to CONFIG options in exported headers, but it has been disabled for more than a decade. Reverting commit 7e3fa5614117 ("kbuild: drop check for CONFIG_ in headers_check") would emit the following warnings for headers_check on x86: usr/include/mtd/ubi-user.h:283: leaks CONFIG_MTD_UBI_BEB_LIMIT to userspace where it is not valid usr/include/linux/cm4000_cs.h:26: leaks CONFIG_COMPAT to userspace where it is not valid usr/include/linux/pkt_cls.h:301: leaks CONFIG_NET_CLS_ACT to userspace where it is not valid usr/include/linux/videodev2.h:2465: leaks CONFIG_VIDEO_ADV_DEBUG to userspace where it is not valid usr/include/linux/bpf.h:249: leaks CONFIG_EFFICIENT_UNALIGNED_ACCESS to userspace where it is not valid usr/include/linux/bpf.h:819: leaks CONFIG_CGROUP_NET_CLASSID to userspace where it is not valid usr/include/linux/bpf.h:1011: leaks CONFIG_IP_ROUTE_CLASSID to userspace where it is not valid usr/include/linux/bpf.h:1742: leaks CONFIG_BPF_KPROBE_OVERRIDE to userspace where it is not valid usr/include/linux/bpf.h:1747: leaks CONFIG_FUNCTION_ERROR_INJECTION to userspace where it is not valid usr/include/linux/bpf.h:1936: leaks CONFIG_XFRM to userspace where it is not valid usr/include/linux/bpf.h:2184: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid usr/include/linux/bpf.h:2210: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid usr/include/linux/bpf.h:2227: leaks CONFIG_SOCK_CGROUP_DATA to userspace where it is not valid usr/include/linux/bpf.h:2311: leaks CONFIG_NET to userspace where it is not valid usr/include/linux/bpf.h:2348: leaks CONFIG_NET to userspace where it is not valid usr/include/linux/bpf.h:2422: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid usr/include/linux/bpf.h:2528: leaks CONFIG_NET to userspace where it is not valid usr/include/linux/pktcdvd.h:37: leaks CONFIG_CDROM_PKTCDVD_WCACHE to userspace where it is not valid usr/include/linux/hw_breakpoint.h:27: leaks CONFIG_HAVE_MIXED_BREAKPOINTS_REGS to userspace where it is not valid usr/include/linux/raw.h:17: leaks CONFIG_MAX_RAW_DEVS to userspace where it is not valid usr/include/linux/elfcore.h:62: leaks CONFIG_BINFMT_ELF_FDPIC to userspace where it is not valid usr/include/linux/eventpoll.h:82: leaks CONFIG_PM_SLEEP to userspace where it is not valid usr/include/linux/atmdev.h:104: leaks CONFIG_COMPAT to userspace where it is not valid usr/include/asm-generic/unistd.h:651: leaks CONFIG_MMU to userspace where it is not valid usr/include/asm-generic/bitsperlong.h:9: leaks CONFIG_64BIT to userspace where it is not valid usr/include/asm-generic/fcntl.h:119: leaks CONFIG_64BIT to userspace where it is not valid usr/include/asm/auxvec.h:14: leaks CONFIG_IA32_EMULATION to userspace where it is not valid usr/include/asm/e820.h:14: leaks CONFIG_NODES_SHIFT to userspace where it is not valid usr/include/asm/e820.h:39: leaks CONFIG_X86_PMEM_LEGACY to userspace where it is not valid usr/include/asm/e820.h:49: leaks CONFIG_INTEL_TXT to userspace where it is not valid usr/include/asm/mman.h:7: leaks CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS to userspace where it is not valid Most of these are false positives because scripts/headers_check.pl parses comment lines. It is also false negative. arch/x86/include/uapi/asm/auxvec.h contains CONFIG_IA32_EMULATION and CONFIG_X86_64, but the only former is reported. It would be possible to fix scripts/headers_check.pl, of course. However, we already have some duplicated checks between headers_check and CONFIG_UAPI_HEADER_TEST. At this moment of time, there are still dozens of headers excluded from the header test (usr/include/Makefile), but we might be able to remove headers_check eventually. I re-implemented it in scripts/headers_install.sh by using sed because the most of code in scripts/headers_install.sh is written in sed. This patch works like this: [1] Run scripts/unifdef first because we need to drop the code surrounded by #ifdef __KERNEL__ ... #endif [2] Remove all C style comments. The sed code is somewhat complicated since we need to deal with both single and multi line comments. Precisely speaking, a comment block is replaced with a space just in case. CONFIG_FOO/* this is a comment */CONFIG_BAR should be converted into: CONFIG_FOO CONFIG_BAR instead of: CONFIG_FOOCONFIG_BAR [3] Match CONFIG_... pattern. It correctly matches to all CONFIG options that appear in a single line. After this commit, this would detect the following warnings, all of which are real ones. warning: include/uapi/linux/pktcdvd.h: leak CONFIG_CDROM_PKTCDVD_WCACHE to user-space warning: include/uapi/linux/hw_breakpoint.h: leak CONFIG_HAVE_MIXED_BREAKPOINTS_REGS to user-space warning: include/uapi/linux/raw.h: leak CONFIG_MAX_RAW_DEVS to user-space warning: include/uapi/linux/elfcore.h: leak CONFIG_BINFMT_ELF_FDPIC to user-space warning: include/uapi/linux/eventpoll.h: leak CONFIG_PM_SLEEP to user-space warning: include/uapi/linux/atmdev.h: leak CONFIG_COMPAT to user-space warning: include/uapi/asm-generic/fcntl.h: leak CONFIG_64BIT to user-space warning: arch/x86/include/uapi/asm/auxvec.h: leak CONFIG_IA32_EMULATION to user-space warning: arch/x86/include/uapi/asm/auxvec.h: leak CONFIG_X86_64 to user-space warning: arch/x86/include/uapi/asm/mman.h: leak CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS to user-space However, it is not nice to show them right now. I created a list of existing leakages. They are not warned, but a new leakage will be blocked by the 0-day bot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
| * | | kbuild: fix modkern_aflags implementationMasahiro Yamada2019-08-151-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the single target building %.symtypes from %.S, $(a_flags) is expanded into the _KERNEL flags even if the object is a part of a module. $(real-obj-m:.o=.symtypes): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) ... would fix the issue, but it is not nice to duplicate similar code for every suffix. Implement modkern_aflags in the same way as modkern_cflags. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: refactor part-of-module moreMasahiro Yamada2019-08-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Make it even shorter. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: treat an object as multi-used when $(foo-) is setMasahiro Yamada2019-08-151-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, Kbuild treats an object as multi-used when any of $(foo-objs), $(foo-y), $(foo-m) is set. It makes more sense to check $(foo-) as well. In the context of foo-$(CONFIG_FOO_FEATURE1), CONFIG_FOO_FEATURE1 could be unset. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: add [M] marker for build log of *.mod.oMasahiro Yamada2019-08-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This builds module objects, so [M] makes sense. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | Kbuild: Handle PREEMPT_RT for version string and magicThomas Gleixner2019-08-142-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the build scripts and the version magic to reflect when CONFIG_PREEMPT_RT is enabled in the same way as CONFIG_PREEMPT is treated. The resulting version strings: Linux m 5.3.0-rc1+ #100 SMP Fri Jul 26 ... Linux m 5.3.0-rc1+ #101 SMP PREEMPT Fri Jul 26 ... Linux m 5.3.0-rc1+ #102 SMP PREEMPT_RT Fri Jul 26 ... The module vermagic: 5.3.0-rc1+ SMP mod_unload modversions 5.3.0-rc1+ SMP preempt mod_unload modversions 5.3.0-rc1+ SMP preempt_rt mod_unload modversions Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: move flex and bison rules to Makefile.hostMasahiro Yamada2019-08-142-16/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flex and bison are used for kconfig, dtc, genksyms, all of which are host programs. I never imagine the kernel embeds a parser or a lexer. Move the flex and bison rules to scripts/Makefile.host. This file is included only when hostprogs-y etc. is present in the Makefile in the directory. So, parsing these rules are skipped in most of directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: make bison create C file and header in a single pattern ruleMasahiro Yamada2019-08-142-17/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We generally expect bison to create not only a C file, but also a header, which will be included from the lexer. Currently, Kbuild generates them in separate rules. So, for instance, when building Kconfig, you will notice bison is invoked twice: HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o LEX scripts/kconfig/lexer.lex.c YACC scripts/kconfig/parser.tab.h HOSTCC scripts/kconfig/lexer.lex.o YACC scripts/kconfig/parser.tab.c HOSTCC scripts/kconfig/parser.tab.o HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/symbol.o HOSTLD scripts/kconfig/conf Make handles such cases nicely in pattern rules [1]. Merge the two rules so that one invokcation of bison can generate both of them. HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o LEX scripts/kconfig/lexer.lex.c YACC scripts/kconfig/parser.tab.[ch] HOSTCC scripts/kconfig/lexer.lex.o HOSTCC scripts/kconfig/parser.tab.o HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/symbol.o HOSTLD scripts/kconfig/conf [1] Pattern rule GNU Make manual says: "Pattern rules may have more than one target. Unlike normal rules, this does not act as many different rules with the same prerequisites and recipe. If a pattern rule has multiple targets, make knows that the rule's recipe is responsible for making all of the targets. The recipe is executed only once to make all the targets. When searching for a pattern rule to match a target, the target patterns of a rule other than the one that matches the target in need of a rule are incidental: make worries only about giving a recipe and prerequisites to the file presently in question. However, when this file's recipe is run, the other targets are marked as having been updated themselves." https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: use $(basename ...) for cmd_asn1_compilerMasahiro Yamada2019-08-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | $(basename ...) trims the last suffix. Using it is more intuitive in my opinion. This pattern rule makes %.asn1.c and %.asn1.h at the same time. Previously, the short log showed only either of them, depending on the target file in question. To clarify that two files are being generated by the single recipe, I changed the log as follows: Before: ASN.1 crypto/asymmetric_keys/x509.asn1.c After: ASN.1 crypto/asymmetric_keys/x509.asn1.[ch] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | kbuild: Fail if gold linker is detectedThomas Gleixner2019-08-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gold linker has known issues of failing the build both in random and in predictible ways: - The x86/X32 VDSO build fails with: arch/x86/entry/vdso/vclock_gettime-x32.o:vclock_gettime.c:function do_hres: error: relocation overflow: reference to 'hvclock_page' That's a known issue for years and the usual workaround is to disable CONFIG_X86_32 - A recent build failure is caused by turning a relocation into an absolute one for unknown reasons. See link below. - There are a couple of gold workarounds applied already, but reports about broken builds with ld.gold keep coming in on a regular base and in most cases the root cause is unclear. In context of the most recent fail H.J. stated: "Since building a workable kernel for different kernel configurations isn't a requirement for gold, I don't recommend gold for kernel." So instead of dealing with attempts to duct tape gold support without understanding the root cause and without support from the gold folks, fail the build when gold is detected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/CAMe9rOqMqkQ0LNpm25yE_Yt0FKp05WmHOrwc0aRDb53miFKM+w@mail.gmail.com Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | modpost: check for static EXPORT_SYMBOL* functionsDenis Efremov2019-08-141-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a check to warn about static EXPORT_SYMBOL* functions during the modpost. In most of the cases, a static symbol marked for exporting is an odd combination that should be fixed either by deleting the exporting mark or by removing the static attribute and adding the appropriate declaration to headers. This check could help to detect the following problems: 1. 550113d4e9f5 ("i2c: add newly exported functions to the header, too") 2. 54638c6eaf44 ("net: phy: make exported variables non-static") 3. 98ef2046f28b ("mm: remove the exporting of totalram_pages") 4. 73df167c819e ("s390/zcrypt: remove the exporting of ap_query_configuration") 5. a57caf8c527f ("sunrpc/cache: remove the exporting of cache_seq_next") 6. e4e4730698c9 ("crypto: skcipher - remove the exporting of skcipher_walk_next") 7. 14b4c48bb1ce ("gve: Remove the exporting of gve_probe") 8. 9b79ee9773a8 ("scsi: libsas: remove the exporting of sas_wait_eh") 9. ... The build time impact is very limited and is almost at the unnoticeable level (< 1 sec). Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2019-09-181-19/+41
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
| * | | | kbuild: replace BASH-specific ${@:2} with shift and ${@}Andrii Nakryiko2019-09-061-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ${@:2} is BASH-specific extension, which makes link-vmlinux.sh rely on BASH. Use shift and ${@} instead to fix this issue. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 341dfcf8d78e ("btf: expose BTF info through sysfs") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2019-09-061-2/+4
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | btf: do not use CONFIG_OUTPUT_FORMATIlya Leoshkevich2019-08-211-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building s390 kernel with CONFIG_DEBUG_INFO_BTF fails, because CONFIG_OUTPUT_FORMAT is not defined. As a matter of fact, this variable appears to be x86-only, so other arches might be affected as well. Fix by obtaining this value from objdump output, just like it's already done for bin_arch. The exact objdump invocation is "inspired" by arch/powerpc/boot/wrapper. Also, use LANG=C for the existing bin_arch objdump invocation to avoid potential build issues on systems with non-English locale. Fixes: 341dfcf8d78e ("btf: expose BTF info through sysfs") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2019-08-193-5/+13
| |\ \ \ \ \ | | |/ / / / | |/| | / / | | | |/ / | | |/| | | | | | | | | | | | Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2019-08-131-19/+33
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. There is a small merge conflict in libbpf (Cc Andrii so he's in the loop as well): for (i = 1; i <= btf__get_nr_types(btf); i++) { t = (struct btf_type *)btf__type_by_id(btf, i); if (!has_datasec && btf_is_var(t)) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); <<<<<<< HEAD /* * using size = 1 is the safest choice, 4 will be too * big and cause kernel BTF validation failure if * original variable took less than 4 bytes */ t->size = 1; *(int *)(t+1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && kind == BTF_KIND_DATASEC) { ======= t->size = sizeof(int); *(int *)(t + 1) = BTF_INT_ENC(0, 0, 32); } else if (!has_datasec && btf_is_datasec(t)) { >>>>>>> 72ef80b5ee131e96172f19e74b4f98fa3404efe8 /* replace DATASEC with STRUCT */ Conflict is between the two commits 1d4126c4e119 ("libbpf: sanitize VAR to conservative 1-byte INT") and b03bc6853c0e ("libbpf: convert libbpf code to use new btf helpers"), so we need to pick the sanitation fixup as well as use the new btf_is_datasec() helper and the whitespace cleanup. Looks like the following: [...] if (!has_datasec && btf_is_var(t)) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); /* * using size = 1 is the safest choice, 4 will be too * big and cause kernel BTF validation failure if * original variable took less than 4 bytes */ t->size = 1; *(int *)(t + 1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && btf_is_datasec(t)) { /* replace DATASEC with STRUCT */ [...] The main changes are: 1) Addition of core parts of compile once - run everywhere (co-re) effort, that is, relocation of fields offsets in libbpf as well as exposure of kernel's own BTF via sysfs and loading through libbpf, from Andrii. More info on co-re: http://vger.kernel.org/bpfconf2019.html#session-2 and http://vger.kernel.org/lpc-bpf2018.html#session-2 2) Enable passing input flags to the BPF flow dissector to customize parsing and allowing it to stop early similar to the C based one, from Stanislav. 3) Add a BPF helper function that allows generating SYN cookies from XDP and tc BPF, from Petar. 4) Add devmap hash-based map type for more flexibility in device lookup for redirects, from Toke. 5) Improvements to XDP forwarding sample code now utilizing recently enabled devmap lookups, from Jesper. 6) Add support for reporting the effective cgroup progs in bpftool, from Jakub and Takshak. 7) Fix reading kernel config from bpftool via /proc/config.gz, from Peter. 8) Fix AF_XDP umem pages mapping for 32 bit architectures, from Ivan. 9) Follow-up to add two more BPF loop tests for the selftest suite, from Alexei. 10) Add perf event output helper also for other skb-based program types, from Allan. 11) Fix a co-re related compilation error in selftests, from Yonghong. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
| | * | | | btf: rename /sys/kernel/btf/kernel into /sys/kernel/btf/vmlinuxAndrii Nakryiko2019-08-131-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose kernel's BTF under the name vmlinux to be more uniform with using kernel module names as file names in the future. Fixes: 341dfcf8d78e ("btf: expose BTF info through sysfs") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-31 15:55:12 +0000