From 542134c0375b5ca2b1d18490c02b8a20bfdd8d74 Mon Sep 17 00:00:00 2001 From: Eudean Sun Date: Tue, 21 Nov 2017 10:43:24 -0800 Subject: HID: cp2112: Fix I2C_BLOCK_DATA transactions The existing driver erroneously treats I2C_BLOCK_DATA and BLOCK_DATA commands the same. For I2C_BLOCK_DATA reads, the length of the read is provided in data->block[0], but the length itself should not be sent to the slave. In contrast, for BLOCK_DATA reads no length is specified since the length will be the first byte returned from the slave. When copying data back to the data buffer, for an I2C_BLOCK_DATA read we have to take care not to overwrite data->block[0] to avoid overwriting the length. A BLOCK_DATA read doesn't have this concern since the first byte returned by the device is the length and belongs in data->block[0]. For I2C_BLOCK_DATA writes, the length is also provided in data->block[0], but the length itself is not sent to the slave (in contrast to BLOCK_DATA writes where the length prefixes the data sent to the slave). This was tested on physical hardware using i2cdump with the i and s flags to test the behavior of I2C_BLOCK_DATA reads and BLOCK_DATA reads, respectively. Writes were not tested but the I2C_BLOCK_DATA write change is pretty simple to verify by inspection. Signed-off-by: Eudean Sun Signed-off-by: Jiri Kosina --- drivers/hid/hid-cp2112.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c index 68cdc962265b..271f31461da4 100644 --- a/drivers/hid/hid-cp2112.c +++ b/drivers/hid/hid-cp2112.c @@ -696,8 +696,16 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr, (u8 *)&word, 2); break; case I2C_SMBUS_I2C_BLOCK_DATA: - size = I2C_SMBUS_BLOCK_DATA; - /* fallthrough */ + if (read_write == I2C_SMBUS_READ) { + read_length = data->block[0]; + count = cp2112_write_read_req(buf, addr, read_length, + command, NULL, 0); + } else { + count = cp2112_write_req(buf, addr, command, + data->block + 1, + data->block[0]); + } + break; case I2C_SMBUS_BLOCK_DATA: if (I2C_SMBUS_READ == read_write) { count = cp2112_write_read_req(buf, addr, @@ -785,6 +793,9 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr, case I2C_SMBUS_WORD_DATA: data->word = le16_to_cpup((__le16 *)buf); break; + case I2C_SMBUS_I2C_BLOCK_DATA: + memcpy(data->block + 1, buf, read_length); + break; case I2C_SMBUS_BLOCK_DATA: if (read_length > I2C_SMBUS_BLOCK_MAX) { ret = -EPROTO; -- cgit v1.2.3-71-gd317 From 5a1314fa697fc65cefaba64cd4699bfc3e6882a6 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Tue, 21 Nov 2017 10:09:02 +0100 Subject: spi: xilinx: Detect stall with Unknown commands When the core is configured in C_SPI_MODE > 0, it integrates a lookup table that automatically configures the core in dual or quad mode based on the command (first byte on the tx fifo). Unfortunately, that list mode_?_memoy_*.mif does not contain all the supported commands by the flash. Since 4.14 spi-nor automatically tries to probe the flash using SFDP (command 0x5a), and that command is not part of the list_mode table. Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads into a stall that can only be recovered with a soft rest. This patch detects this kind of stall and returns -EIO to the caller on those commands. spi-nor can handle this error properly: m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404 m25p80 spi0.0: SPI transfer failed: -5 spi_master spi0: failed to transfer one message from queue m25p80 spi0.0: s25sl064p (8192 Kbytes) Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-xilinx.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index bc7100b93dfc..e0b9fe1d0e37 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -271,6 +271,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) while (remaining_words) { int n_words, tx_words, rx_words; u32 sr; + int stalled; n_words = min(remaining_words, xspi->buffer_size); @@ -299,7 +300,17 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) /* Read out all the data from the Rx FIFO */ rx_words = n_words; + stalled = 10; while (rx_words) { + if (rx_words == n_words && !(stalled--) && + !(sr & XSPI_SR_TX_EMPTY_MASK) && + (sr & XSPI_SR_RX_EMPTY_MASK)) { + dev_err(&spi->dev, + "Detected stall. Check C_SPI_MODE and C_SPI_MEMORY\n"); + xspi_init_hw(xspi); + return -EIO; + } + if ((sr & XSPI_SR_TX_EMPTY_MASK) && (rx_words > 1)) { xilinx_spi_rx(xspi); rx_words--; -- cgit v1.2.3-71-gd317 From 251c201bf4f8b5bf4f1ccb4f8920eed2e1f57580 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Mon, 27 Nov 2017 15:16:32 +0100 Subject: spi: a3700: Fix clk prescaling for coefficient over 15 The Armada 3700 SPI controller has 2 ranges of prescaler coefficients. One ranging from 0 to 15 by steps of 1, and one ranging from 0 to 30 by steps of 2. This commit fixes the prescaler coefficients that are over 15 so that it uses the correct range of values. The prescaling coefficient is rounded to the upper value if it is odd. This was tested on Espressobin with spidev and a locigal analyser. Signed-off-by: Maxime Chevallier Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-armada-3700.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 77fe55ce790c..d65345312527 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -79,6 +79,7 @@ #define A3700_SPI_BYTE_LEN BIT(5) #define A3700_SPI_CLK_PRESCALE BIT(0) #define A3700_SPI_CLK_PRESCALE_MASK (0x1f) +#define A3700_SPI_CLK_EVEN_OFFS (0x10) #define A3700_SPI_WFIFO_THRS_BIT 28 #define A3700_SPI_RFIFO_THRS_BIT 24 @@ -220,6 +221,13 @@ static void a3700_spi_clock_set(struct a3700_spi *a3700_spi, prescale = DIV_ROUND_UP(clk_get_rate(a3700_spi->clk), speed_hz); + /* For prescaler values over 15, we can only set it by steps of 2. + * Starting from A3700_SPI_CLK_EVEN_OFFS, we set values from 0 up to + * 30. We only use this range from 16 to 30. + */ + if (prescale > 15) + prescale = A3700_SPI_CLK_EVEN_OFFS + DIV_ROUND_UP(prescale, 2); + val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG); val = val & ~A3700_SPI_CLK_PRESCALE_MASK; -- cgit v1.2.3-71-gd317 From 16a27dfd218566f9604d5542c6285395cfc6831c Mon Sep 17 00:00:00 2001 From: Albert Pool Date: Mon, 20 Nov 2017 14:20:09 +0100 Subject: ata: mediatek: Fix typo in module description Signed-off-by: Albert Pool Signed-off-by: Tejun Heo --- drivers/ata/ahci_mtk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c index 80854f71559a..489452a64303 100644 --- a/drivers/ata/ahci_mtk.c +++ b/drivers/ata/ahci_mtk.c @@ -1,5 +1,5 @@ /* - * MeidaTek AHCI SATA driver + * MediaTek AHCI SATA driver * * Copyright (c) 2017 MediaTek Inc. * Author: Ryder Lee @@ -192,5 +192,5 @@ static struct platform_driver mtk_ahci_driver = { }; module_platform_driver(mtk_ahci_driver); -MODULE_DESCRIPTION("MeidaTek SATA AHCI Driver"); +MODULE_DESCRIPTION("MediaTek SATA AHCI Driver"); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-71-gd317 From c1da86c19ad6bfb77ceef3414c82269e8466f410 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Sat, 25 Nov 2017 15:49:49 +0530 Subject: pata_pdc2027x: Remove unnecessary error check Here, The function pdc_hardware_init always return zero. So it is not necessary to check its return value. Signed-off-by: Arvind Yadav Signed-off-by: Tejun Heo --- drivers/ata/pata_pdc2027x.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index ffd8d33c6e0f..4a9d532bdbb8 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -649,7 +649,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) * @host: target ATA host * @board_idx: board identifier */ -static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) +static void pdc_hardware_init(struct ata_host *host, unsigned int board_idx) { long pll_clock; @@ -665,8 +665,6 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) /* Adjust PLL control register */ pdc_adjust_pll(host, pll_clock, board_idx); - - return 0; } /** @@ -753,8 +751,7 @@ static int pdc2027x_init_one(struct pci_dev *pdev, //pci_enable_intx(pdev); /* initialize adapter */ - if (pdc_hardware_init(host, board_idx) != 0) - return -EIO; + pdc_hardware_init(host, board_idx); pci_set_master(pdev); return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, @@ -778,8 +775,7 @@ static int pdc2027x_reinit_one(struct pci_dev *pdev) else board_idx = PDC_UDMA_133; - if (pdc_hardware_init(host, board_idx)) - return -EIO; + pdc_hardware_init(host, board_idx); ata_host_resume(host); return 0; -- cgit v1.2.3-71-gd317 From 20f9ceed72f127e4cc44c0358160e6e0118f823d Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Sat, 25 Nov 2017 16:47:35 +0530 Subject: pata_pdc2027x : make pdc2027x_*_timing structures const Make these pdc2027x_*_timing structures const as it is never modified. Signed-off-by: Arvind Yadav Signed-off-by: Tejun Heo --- drivers/ata/pata_pdc2027x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 4a9d532bdbb8..6db2e34bd52f 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -82,7 +82,7 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed * is issued to the device. However, if the controller clock is 133MHz, * the following tables must be used. */ -static struct pdc2027x_pio_timing { +static const struct pdc2027x_pio_timing { u8 value0, value1, value2; } pdc2027x_pio_timing_tbl[] = { { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */ @@ -92,7 +92,7 @@ static struct pdc2027x_pio_timing { { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ }; -static struct pdc2027x_mdma_timing { +static const struct pdc2027x_mdma_timing { u8 value0, value1; } pdc2027x_mdma_timing_tbl[] = { { 0xdf, 0x5f }, /* MDMA mode 0 */ @@ -100,7 +100,7 @@ static struct pdc2027x_mdma_timing { { 0x69, 0x25 }, /* MDMA mode 2 */ }; -static struct pdc2027x_udma_timing { +static const struct pdc2027x_udma_timing { u8 value0, value1, value2; } pdc2027x_udma_timing_tbl[] = { { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ -- cgit v1.2.3-71-gd317 From 9816ef6ecbc102b9bcbb1d83e12c7fb19924f38c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 22 Nov 2017 11:58:03 +0300 Subject: scsi: lpfc: Use after free in lpfc_rq_buf_free() The error message dereferences "rqb_entry" so we need to print it first and then free the buffer. Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context") Signed-off-by: Dan Carpenter Acked-by: Dick Kennedy Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 56faeb049b4a..87c08ff37ddd 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -753,12 +753,12 @@ lpfc_rq_buf_free(struct lpfc_hba *phba, struct lpfc_dmabuf *mp) drqe.address_hi = putPaddrHigh(rqb_entry->dbuf.phys); rc = lpfc_sli4_rq_put(rqb_entry->hrq, rqb_entry->drq, &hrqe, &drqe); if (rc < 0) { - (rqbp->rqb_free_buffer)(phba, rqb_entry); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "6409 Cannot post to RQ %d: %x %x\n", rqb_entry->hrq->queue_id, rqb_entry->hrq->host_index, rqb_entry->hrq->hba_index); + (rqbp->rqb_free_buffer)(phba, rqb_entry); } else { list_add_tail(&rqb_entry->hbuf.list, &rqbp->rqb_buffer_list); rqbp->buffer_count++; -- cgit v1.2.3-71-gd317 From fe55e79536a37348dcb0b7177ee5fda6deccb99a Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Sat, 25 Nov 2017 19:38:10 +0100 Subject: scsi: libfc: fix ELS request handling The modification of fc_lport_recv_els_req() in commit fcabb09e59a7 ("scsi: libfc: directly call ELS request handlers") caused certain requests not to be handled at all. Fix that. Fixes: fcabb09e59a7 ("scsi: libfc: directly call ELS request handlers") Signed-off-by: Martin Wilck Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/libfc/fc_lport.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 5da46052e179..21be672679fb 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -904,10 +904,14 @@ static void fc_lport_recv_els_req(struct fc_lport *lport, case ELS_FLOGI: if (!lport->point_to_multipoint) fc_lport_recv_flogi_req(lport, fp); + else + fc_rport_recv_req(lport, fp); break; case ELS_LOGO: if (fc_frame_sid(fp) == FC_FID_FLOGI) fc_lport_recv_logo_req(lport, fp); + else + fc_rport_recv_req(lport, fp); break; case ELS_RSCN: lport->tt.disc_recv_req(lport, fp); -- cgit v1.2.3-71-gd317 From d18539754d97876503275efc7d00a1901bb0cfad Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Nov 2017 14:25:25 +0100 Subject: scsi: aacraid: address UBSAN warning regression As reported by Meelis Roos, my previous patch causes an incorrect calculation of the timeout, through an undefined signed integer overflow: [ 12.228155] UBSAN: Undefined behaviour in drivers/scsi/aacraid/commsup.c:2514:49 [ 12.228229] signed integer overflow: [ 12.228283] 964297611 * 250 cannot be represented in type 'long int' The problem is that doing a multiplication with HZ first and then dividing by USEC_PER_SEC worked correctly for 32-bit microseconds, but not for 32-bit nanoseconds, which would require up to 41 bits. This reworks the calculation to first convert the nanoseconds into jiffies, which should give us the same result as before and not overflow. Unfortunately I did not understand the exact intention of the algorithm, in particular the part where we add half a second, so it's possible that there is still a preexisting problem in this function. I added a comment that this would be handled more nicely using usleep_range(), which generally works better for waking up at a particular time than the current schedule_timeout() based implementation. I did not feel comfortable trying to implement that without being sure what the intent is here though. Fixes: 820f18865912 ("scsi: aacraid: use timespec64 instead of timeval") Tested-by: Meelis Roos Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/commsup.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index bec9f3193f60..80a8cb26cdea 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -2482,8 +2482,8 @@ int aac_command_thread(void *data) /* Synchronize our watches */ if (((NSEC_PER_SEC - (NSEC_PER_SEC / HZ)) > now.tv_nsec) && (now.tv_nsec > (NSEC_PER_SEC / HZ))) - difference = (((NSEC_PER_SEC - now.tv_nsec) * HZ) - + NSEC_PER_SEC / 2) / NSEC_PER_SEC; + difference = HZ + HZ / 2 - + now.tv_nsec / (NSEC_PER_SEC / HZ); else { if (now.tv_nsec > NSEC_PER_SEC / 2) ++now.tv_sec; @@ -2507,6 +2507,10 @@ int aac_command_thread(void *data) if (kthread_should_stop()) break; + /* + * we probably want usleep_range() here instead of the + * jiffies computation + */ schedule_timeout(difference); if (kthread_should_stop()) -- cgit v1.2.3-71-gd317 From 45349821ab3a8d378b8f37e52c6fe1aa1b870c47 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 28 Nov 2017 16:26:57 +0100 Subject: scsi: bfa: fix access to bfad_im_port_s MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 'cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")' changed access to bfa's 'struct bfad_im_port_s' by using shost_priv() instead of shost->hostdata[0]. This lead to crashes like in the following back-trace: task: ffff880046375300 ti: ffff8800a2ef8000 task.ti: ffff8800a2ef8000 RIP: e030:[] [] bfa_fcport_get_attr+0x82/0x260 [bfa] RSP: e02b:ffff8800a2efba10 EFLAGS: 00010046 RAX: 575f415441536432 RBX: ffff8800a2efba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8800a2efba28 RDI: ffff880004dc31d8 RBP: ffff880004dc31d8 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88011fadc468 R11: 0000000000000001 R12: ffff880004dc31f0 R13: 0000000000000200 R14: ffff880004dc61d0 R15: ffff880004947a10 FS: 00007feb1e489700(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007ffe14e46c10 CR3: 00000000957b8000 CR4: 0000000000000660 Stack: ffff88001d4da000 ffff880004dc31c0 ffffffffa048a9df ffffffff81e56380 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [] bfad_iocmd_ioc_get_info+0x4f/0x220 [bfa] [] bfad_iocmd_handler+0xa00/0xd40 [bfa] [] bfad_im_bsg_request+0xee/0x1b0 [bfa] [] fc_bsg_dispatch+0x10b/0x1b0 [scsi_transport_fc] [] bsg_request_fn+0x11d/0x1c0 [] __blk_run_queue+0x2f/0x40 [] blk_execute_rq_nowait+0xa8/0x160 [] blk_execute_rq+0x77/0x120 [] bsg_ioctl+0x1b6/0x200 [] do_vfs_ioctl+0x2cd/0x4a0 [] SyS_ioctl+0x74/0x80 [] entry_SYSCALL_64_fastpath+0x12/0x6d Fixes: cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper") Signed-off-by: Johannes Thumshirn Cc: Michal Koutný Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/bfa/bfad_bsg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 72ca2a2e08e2..09ef68c8225f 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -3135,7 +3135,8 @@ bfad_im_bsg_vendor_request(struct bsg_job *job) struct fc_bsg_request *bsg_request = job->request; struct fc_bsg_reply *bsg_reply = job->reply; uint32_t vendor_cmd = bsg_request->rqst_data.h_vendor.vendor_cmd[0]; - struct bfad_im_port_s *im_port = shost_priv(fc_bsg_to_shost(job)); + struct Scsi_Host *shost = fc_bsg_to_shost(job); + struct bfad_im_port_s *im_port = shost->hostdata[0]; struct bfad_s *bfad = im_port->bfad; void *payload_kbuf; int rc = -EINVAL; @@ -3350,7 +3351,8 @@ int bfad_im_bsg_els_ct_request(struct bsg_job *job) { struct bfa_bsg_data *bsg_data; - struct bfad_im_port_s *im_port = shost_priv(fc_bsg_to_shost(job)); + struct Scsi_Host *shost = fc_bsg_to_shost(job); + struct bfad_im_port_s *im_port = shost->hostdata[0]; struct bfad_s *bfad = im_port->bfad; bfa_bsg_fcpt_t *bsg_fcpt; struct bfad_fcxp *drv_fcxp; -- cgit v1.2.3-71-gd317 From 5c9afbda911ce20b3f2181d1e440a0222e1027dd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 17 Nov 2017 22:37:53 +0100 Subject: dmaengine: ioat: Fix error handling path If the last test in 'ioat_dma_self_test()' fails, we must release all the allocated resources and not just part of them. Signed-off-by: Christophe JAILLET Acked-by: Dave Jiang Signed-off-by: Vinod Koul --- drivers/dma/ioat/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c index 2f31d3d0caa6..7792a9186f9c 100644 --- a/drivers/dma/ioat/init.c +++ b/drivers/dma/ioat/init.c @@ -390,7 +390,7 @@ static int ioat_dma_self_test(struct ioatdma_device *ioat_dma) if (memcmp(src, dest, IOAT_TEST_SIZE)) { dev_err(dev, "Self-test copy failed compare, disabling\n"); err = -ENODEV; - goto free_resources; + goto unmap_dma; } unmap_dma: -- cgit v1.2.3-71-gd317 From 62a277d43d47e74972de44d33bd3763e31992414 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 20 Nov 2017 08:28:14 -0600 Subject: dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved _xt_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _xt_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: 4483320e241c ("dmaengine: Use Pointer xt after NULL check.") Signed-off-by: Gustavo A. R. Silva Acked-by: Ludovic Desroches Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index fbab271b3bf9..a861b5b4d443 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -708,7 +708,7 @@ atc_prep_dma_interleaved(struct dma_chan *chan, unsigned long flags) { struct at_dma_chan *atchan = to_at_dma_chan(chan); - struct data_chunk *first = xt->sgl; + struct data_chunk *first; struct at_desc *desc = NULL; size_t xfer_count; unsigned int dwidth; @@ -720,6 +720,8 @@ atc_prep_dma_interleaved(struct dma_chan *chan, if (unlikely(!xt || xt->numf != 1 || !xt->frame_size)) return NULL; + first = xt->sgl; + dev_info(chan2dev(chan), "%s: src=%pad, dest=%pad, numf=%d, frame_size=%d, flags=0x%lx\n", __func__, &xt->src_start, &xt->dst_start, xt->numf, -- cgit v1.2.3-71-gd317 From 15d8374874ded0bec37ef27f8301a6d54032c0e5 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 14 Nov 2017 14:43:27 +0000 Subject: mfd: cros ec: spi: Don't send first message too soon On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Cc: Signed-off-by: Jon Hunter Reviewed-by: Brian Norris Reviewed-by: Douglas Anderson Acked-by: Benson Leung Signed-off-by: Lee Jones --- drivers/mfd/cros_ec_spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index c9714072e224..a14196e95e9b 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -667,6 +667,7 @@ static int cros_ec_spi_probe(struct spi_device *spi) sizeof(struct ec_response_get_protocol_info); ec_dev->dout_size = sizeof(struct ec_host_request); + ec_spi->last_transfer_ns = ktime_get_ns(); err = cros_ec_register(ec_dev); if (err) { -- cgit v1.2.3-71-gd317 From 0a423772de2f3d7b00899987884f62f63ae00dcb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sat, 11 Nov 2017 16:38:43 +0100 Subject: mfd: twl4030-audio: Fix sibling-node lookup A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b7b31 ("mfd: twl4030-audio: Add DT support") Cc: stable # 3.7 Signed-off-by: Johan Hovold Acked-by: Peter Ujfalusi Signed-off-by: Lee Jones --- drivers/mfd/twl4030-audio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c index da16bf45fab4..dc94ffc6321a 100644 --- a/drivers/mfd/twl4030-audio.c +++ b/drivers/mfd/twl4030-audio.c @@ -159,13 +159,18 @@ unsigned int twl4030_audio_get_mclk(void) EXPORT_SYMBOL_GPL(twl4030_audio_get_mclk); static bool twl4030_audio_has_codec(struct twl4030_audio_data *pdata, - struct device_node *node) + struct device_node *parent) { + struct device_node *node; + if (pdata && pdata->codec) return true; - if (of_find_node_by_name(node, "codec")) + node = of_get_child_by_name(parent, "codec"); + if (node) { + of_node_put(node); return true; + } return false; } -- cgit v1.2.3-71-gd317 From 85e9b13cbb130a3209f21bd7933933399c389ffe Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sat, 11 Nov 2017 16:38:44 +0100 Subject: mfd: twl6040: Fix child-node lookup Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Cc: stable # 3.5 Fixes: 37e13cecaa14 ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6ae38e ("mfd: Fix twl6040 build failure") Signed-off-by: Johan Hovold Acked-by: Peter Ujfalusi Signed-off-by: Lee Jones --- drivers/mfd/twl6040.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c index d66502d36ba0..dd19f17a1b63 100644 --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -97,12 +97,16 @@ static struct reg_sequence twl6040_patch[] = { }; -static bool twl6040_has_vibra(struct device_node *node) +static bool twl6040_has_vibra(struct device_node *parent) { -#ifdef CONFIG_OF - if (of_find_node_by_name(node, "vibra")) + struct device_node *node; + + node = of_get_child_by_name(parent, "vibra"); + if (node) { + of_node_put(node); return true; -#endif + } + return false; } -- cgit v1.2.3-71-gd317 From 001dde9400d5c3e9e2ce2abe06c1efa70a25dfde Mon Sep 17 00:00:00 2001 From: Shawn Nematbakhsh Date: Wed, 27 Sep 2017 14:35:27 -0700 Subject: mfd: cros ec: spi: Fix "in progress" error signaling For host commands that take a long time to process, cros ec can return early by signaling a EC_RES_IN_PROGRESS result. The host must then poll status with EC_CMD_GET_COMMS_STATUS until completion of the command. None of the above applies when data link errors are encountered. When errors such as EC_SPI_PAST_END are encountered during command transmission, it usually means the command was not received by the EC. Treating such errors as if they were 'EC_RES_IN_PROGRESS' results is almost always the wrong decision, and can result in host commands silently being lost. Reported-by: Jon Hunter Signed-off-by: Shawn Nematbakhsh Reviewed-by: Brian Norris Tested-by: Jon Hunter Signed-off-by: Lee Jones --- drivers/mfd/cros_ec_spi.c | 52 ++++++++++++++++++++++------------------------- 1 file changed, 24 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index a14196e95e9b..59c82cdcf48d 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -377,6 +377,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, u8 *ptr; u8 *rx_buf; u8 sum; + u8 rx_byte; int ret = 0, final_ret; len = cros_ec_prepare_tx(ec_dev, ec_msg); @@ -421,25 +422,22 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, if (!ret) { /* Verify that EC can process command */ for (i = 0; i < len; i++) { - switch (rx_buf[i]) { - case EC_SPI_PAST_END: - case EC_SPI_RX_BAD_DATA: - case EC_SPI_NOT_READY: - ret = -EAGAIN; - ec_msg->result = EC_RES_IN_PROGRESS; - default: + rx_byte = rx_buf[i]; + if (rx_byte == EC_SPI_PAST_END || + rx_byte == EC_SPI_RX_BAD_DATA || + rx_byte == EC_SPI_NOT_READY) { + ret = -EREMOTEIO; break; } - if (ret) - break; } - if (!ret) - ret = cros_ec_spi_receive_packet(ec_dev, - ec_msg->insize + sizeof(*response)); - } else { - dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); } + if (!ret) + ret = cros_ec_spi_receive_packet(ec_dev, + ec_msg->insize + sizeof(*response)); + else + dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); + final_ret = terminate_request(ec_dev); spi_bus_unlock(ec_spi->spi->master); @@ -508,6 +506,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, int i, len; u8 *ptr; u8 *rx_buf; + u8 rx_byte; int sum; int ret = 0, final_ret; @@ -544,25 +543,22 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, if (!ret) { /* Verify that EC can process command */ for (i = 0; i < len; i++) { - switch (rx_buf[i]) { - case EC_SPI_PAST_END: - case EC_SPI_RX_BAD_DATA: - case EC_SPI_NOT_READY: - ret = -EAGAIN; - ec_msg->result = EC_RES_IN_PROGRESS; - default: + rx_byte = rx_buf[i]; + if (rx_byte == EC_SPI_PAST_END || + rx_byte == EC_SPI_RX_BAD_DATA || + rx_byte == EC_SPI_NOT_READY) { + ret = -EREMOTEIO; break; } - if (ret) - break; } - if (!ret) - ret = cros_ec_spi_receive_response(ec_dev, - ec_msg->insize + EC_MSG_TX_PROTO_BYTES); - } else { - dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); } + if (!ret) + ret = cros_ec_spi_receive_response(ec_dev, + ec_msg->insize + EC_MSG_TX_PROTO_BYTES); + else + dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); + final_ret = terminate_request(ec_dev); spi_bus_unlock(ec_spi->spi->master); -- cgit v1.2.3-71-gd317 From 56075f6072e7fdac302cff4e1b4c93b64ced99ab Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Sun, 26 Nov 2017 15:34:04 +1100 Subject: HID: holtekff: move MODULE_* parameters out of #ifdef block If you compile with: CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF is not set You get the following warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/hid/hid-holtekff.o see include/linux/module.h for more information Fix this by moving the module info out of the #ifdef CONFIG_HOLTEK_FF block and into the un-guarded part of the file. Signed-off-by: Daniel Axtens Acked-by: Anssi Hannula Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-holtekff.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c index 9325545fc3ae..edc0f64bb584 100644 --- a/drivers/hid/hid-holtekff.c +++ b/drivers/hid/hid-holtekff.c @@ -32,10 +32,6 @@ #ifdef CONFIG_HOLTEK_FF -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Anssi Hannula "); -MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices"); - /* * These commands and parameters are currently known: * @@ -223,3 +219,7 @@ static struct hid_driver holtek_driver = { .probe = holtek_probe, }; module_hid_driver(holtek_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Anssi Hannula "); +MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices"); -- cgit v1.2.3-71-gd317 From f9ecc83f8d723372976df8eda3193726d7a24fcb Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Fri, 1 Dec 2017 13:37:12 -0500 Subject: eeprom: at24: fix I2C device selection for runtime PM The at24 driver creates dummy I2C devices to access offsets in the chip that are outside the area supported using a single I2C address. It is not meaningful to use runtime PM to such devices; the system firmware (ACPI) does not know about these devices nor runtime PM was enabled for them. Always use the real device instead of the dummy ones. Fixes: 98e8201039af ("eeprom: at24: enable runtime pm support") Signed-off-by: Sakari Ailus Tested-by: Sven Van Asbroeck on a 24AA16/24LC16B [Bartosz: rebased on top of previous fixes for 4.15, tweaked the commit message] [Sven: fixed Bartosz's rebase] Signed-off-by: Sven Van Asbroeck Signed-off-by: Bartosz Golaszewski --- drivers/misc/eeprom/at24.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 305a7a464d09..20b4f26d30d7 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -562,7 +562,7 @@ static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf, static int at24_read(void *priv, unsigned int off, void *val, size_t count) { struct at24_data *at24 = priv; - struct i2c_client *client; + struct device *dev = &at24->client[0]->dev; char *buf = val; int ret; @@ -572,11 +572,9 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) if (off + count > at24->chip.byte_len) return -EINVAL; - client = at24_translate_offset(at24, &off); - - ret = pm_runtime_get_sync(&client->dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) { - pm_runtime_put_noidle(&client->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -592,7 +590,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) status = at24->read_func(at24, buf, off, count); if (status < 0) { mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return status; } buf += status; @@ -602,7 +600,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return 0; } @@ -610,7 +608,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) static int at24_write(void *priv, unsigned int off, void *val, size_t count) { struct at24_data *at24 = priv; - struct i2c_client *client; + struct device *dev = &at24->client[0]->dev; char *buf = val; int ret; @@ -620,11 +618,9 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) if (off + count > at24->chip.byte_len) return -EINVAL; - client = at24_translate_offset(at24, &off); - - ret = pm_runtime_get_sync(&client->dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) { - pm_runtime_put_noidle(&client->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -640,7 +636,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) status = at24->write_func(at24, buf, off, count); if (status < 0) { mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return status; } buf += status; @@ -650,7 +646,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return 0; } -- cgit v1.2.3-71-gd317 From a773d419275bf54854ca6cfda8f2594ed2790faa Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 2 Jun 2017 13:20:25 +0300 Subject: tracing: Pass export pointer as argument to ->write() By passing an export descriptor to the write function, users don't need to keep a global static pointer and can rely on container_of() to fetch their own structure. Link: http://lkml.kernel.org/r/20170602102025.5140-1-felipe.balbi@linux.intel.com Acked-by: Steven Rostedt (VMware) Reviewed-by: Chunyan Zhang Signed-off-by: Felipe Balbi Signed-off-by: Steven Rostedt (VMware) --- drivers/hwtracing/stm/ftrace.c | 6 ++++-- include/linux/trace.h | 2 +- kernel/trace/trace.c | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/stm/ftrace.c b/drivers/hwtracing/stm/ftrace.c index bd126a7c6da2..7da75644c750 100644 --- a/drivers/hwtracing/stm/ftrace.c +++ b/drivers/hwtracing/stm/ftrace.c @@ -42,9 +42,11 @@ static struct stm_ftrace { * @len: length of the data packet */ static void notrace -stm_ftrace_write(const void *buf, unsigned int len) +stm_ftrace_write(struct trace_export *export, const void *buf, unsigned int len) { - stm_source_write(&stm_ftrace.data, STM_FTRACE_CHAN, buf, len); + struct stm_ftrace *stm = container_of(export, struct stm_ftrace, ftrace); + + stm_source_write(&stm->data, STM_FTRACE_CHAN, buf, len); } static int stm_ftrace_link(struct stm_source_data *data) diff --git a/include/linux/trace.h b/include/linux/trace.h index d24991c1fef3..b95ffb2188ab 100644 --- a/include/linux/trace.h +++ b/include/linux/trace.h @@ -18,7 +18,7 @@ */ struct trace_export { struct trace_export __rcu *next; - void (*write)(const void *, unsigned int); + void (*write)(struct trace_export *, const void *, unsigned int); }; int register_ftrace_export(struct trace_export *export); diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9f3f043ba3b7..59518b8126d0 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2415,7 +2415,7 @@ trace_process_export(struct trace_export *export, entry = ring_buffer_event_data(event); size = ring_buffer_event_length(event); - export->write(entry, size); + export->write(export, entry, size); } static DEFINE_MUTEX(ftrace_export_lock); -- cgit v1.2.3-71-gd317 From afc567a4977b2d798e05153dd131a3c8d4758c0c Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Sat, 25 Nov 2017 00:27:26 -0500 Subject: dm table: fix regression from improper dm_dev_internal.count refcount_t conversion Multiple refcounts are needed if the device was already added. The micro-optimization of setting the refcount to 1 on first added (rather than fall thru to a common refcount_inc) lost sight of the fact that the refcount_inc is also needed for the case when the device already exists and the mode need not be upgraded. Fixes: 2a0b4682e0 ("dm: convert dm_dev_internal.count from atomic_t to refcount_t") Reported-by: Zdenek Kabelac Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 88130b5d95f9..aaffd0c0ee9a 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -453,14 +453,15 @@ int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode, refcount_set(&dd->count, 1); list_add(&dd->list, &t->devices); + goto out; } else if (dd->dm_dev->mode != (mode | dd->dm_dev->mode)) { r = upgrade_mode(dd, mode, t->md); if (r) return r; - refcount_inc(&dd->count); } - + refcount_inc(&dd->count); +out: *result = dd->dm_dev; return 0; } -- cgit v1.2.3-71-gd317 From 7e6358d244e4706fe612a77b9c36519a33600ac0 Mon Sep 17 00:00:00 2001 From: "monty_pavel@sina.com" Date: Sat, 25 Nov 2017 01:43:50 +0800 Subject: dm: fix various targets to dm_register_target after module __init resources created A NULL pointer is seen if two concurrent "vgchange -ay -K " processes race to load the dm-thin-pool module: PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange" #0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9 0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992 0000002 [ffff883cd743d730] oops_end at ffffffff81515c90 0000003 [ffff883cd743d760] no_context at ffffffff81049f1b 0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5 0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce 0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f 0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae 0000008 [ffff883cd743d980] page_fault at ffffffff81514f95 [exception RIP: kmem_cache_alloc+108] RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046 RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0 RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000 RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000 R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0 R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5 0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083 0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4 0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool] 0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod] 0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod] 0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod] The race results in a NULL pointer because: Process A (vgchange -ay -K): a. send DM_LIST_VERSIONS_CMD ioctl; b. pool_target not registered; c. modprobe dm_thin_pool and wait until end. Process B (vgchange -ay -K): a. send DM_LIST_VERSIONS_CMD ioctl; b. pool_target registered; c. table_load->dm_table_add_target->pool_ctr; d. _new_mapping_cache is NULL and panic. Note: 1. process A and process B are two concurrent processes. 2. pool_target can be detected by process B but _new_mapping_cache initialization has not ended. To fix dm-thin-pool, and other targets (cache, multipath, and snapshot) with the same problem, simply dm_register_target() after all resources created during module init (as labelled with __init) are finished. Cc: stable@vger.kernel.org Signed-off-by: monty Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-target.c | 12 +++++------ drivers/md/dm-mpath.c | 18 ++++++++--------- drivers/md/dm-snap.c | 48 ++++++++++++++++++++++---------------------- drivers/md/dm-thin.c | 22 +++++++++----------- 4 files changed, 49 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index cf23a14f9c6a..47407e43b96a 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -3472,18 +3472,18 @@ static int __init dm_cache_init(void) { int r; - r = dm_register_target(&cache_target); - if (r) { - DMERR("cache target registration failed: %d", r); - return r; - } - migration_cache = KMEM_CACHE(dm_cache_migration, 0); if (!migration_cache) { dm_unregister_target(&cache_target); return -ENOMEM; } + r = dm_register_target(&cache_target); + if (r) { + DMERR("cache target registration failed: %d", r); + return r; + } + return 0; } diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index c8faa2b85842..35a2a2fa477f 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1957,13 +1957,6 @@ static int __init dm_multipath_init(void) { int r; - r = dm_register_target(&multipath_target); - if (r < 0) { - DMERR("request-based register failed %d", r); - r = -EINVAL; - goto bad_register_target; - } - kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0); if (!kmultipathd) { DMERR("failed to create workqueue kmpathd"); @@ -1985,13 +1978,20 @@ static int __init dm_multipath_init(void) goto bad_alloc_kmpath_handlerd; } + r = dm_register_target(&multipath_target); + if (r < 0) { + DMERR("request-based register failed %d", r); + r = -EINVAL; + goto bad_register_target; + } + return 0; +bad_register_target: + destroy_workqueue(kmpath_handlerd); bad_alloc_kmpath_handlerd: destroy_workqueue(kmultipathd); bad_alloc_kmultipathd: - dm_unregister_target(&multipath_target); -bad_register_target: return r; } diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 1113b42e1eda..a0613bd8ed00 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -2411,24 +2411,6 @@ static int __init dm_snapshot_init(void) return r; } - r = dm_register_target(&snapshot_target); - if (r < 0) { - DMERR("snapshot target register failed %d", r); - goto bad_register_snapshot_target; - } - - r = dm_register_target(&origin_target); - if (r < 0) { - DMERR("Origin target register failed %d", r); - goto bad_register_origin_target; - } - - r = dm_register_target(&merge_target); - if (r < 0) { - DMERR("Merge target register failed %d", r); - goto bad_register_merge_target; - } - r = init_origin_hash(); if (r) { DMERR("init_origin_hash failed."); @@ -2449,19 +2431,37 @@ static int __init dm_snapshot_init(void) goto bad_pending_cache; } + r = dm_register_target(&snapshot_target); + if (r < 0) { + DMERR("snapshot target register failed %d", r); + goto bad_register_snapshot_target; + } + + r = dm_register_target(&origin_target); + if (r < 0) { + DMERR("Origin target register failed %d", r); + goto bad_register_origin_target; + } + + r = dm_register_target(&merge_target); + if (r < 0) { + DMERR("Merge target register failed %d", r); + goto bad_register_merge_target; + } + return 0; -bad_pending_cache: - kmem_cache_destroy(exception_cache); -bad_exception_cache: - exit_origin_hash(); -bad_origin_hash: - dm_unregister_target(&merge_target); bad_register_merge_target: dm_unregister_target(&origin_target); bad_register_origin_target: dm_unregister_target(&snapshot_target); bad_register_snapshot_target: + kmem_cache_destroy(pending_cache); +bad_pending_cache: + kmem_cache_destroy(exception_cache); +bad_exception_cache: + exit_origin_hash(); +bad_origin_hash: dm_exception_store_exit(); return r; diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 89e5dff9b4cf..f91d771fff4b 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -4355,30 +4355,28 @@ static struct target_type thin_target = { static int __init dm_thin_init(void) { - int r; + int r = -ENOMEM; pool_table_init(); + _new_mapping_cache = KMEM_CACHE(dm_thin_new_mapping, 0); + if (!_new_mapping_cache) + return r; + r = dm_register_target(&thin_target); if (r) - return r; + goto bad_new_mapping_cache; r = dm_register_target(&pool_target); if (r) - goto bad_pool_target; - - r = -ENOMEM; - - _new_mapping_cache = KMEM_CACHE(dm_thin_new_mapping, 0); - if (!_new_mapping_cache) - goto bad_new_mapping_cache; + goto bad_thin_target; return 0; -bad_new_mapping_cache: - dm_unregister_target(&pool_target); -bad_pool_target: +bad_thin_target: dm_unregister_target(&thin_target); +bad_new_mapping_cache: + kmem_cache_destroy(_new_mapping_cache); return r; } -- cgit v1.2.3-71-gd317 From adf6895754e2503d994a765535fd1813f8834674 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 30 Nov 2017 19:42:52 -0800 Subject: acpi, nfit: fix health event notification Integration testing with a BIOS that generates injected health event notifications fails to communicate those events to userspace. The nfit driver neglects to link the ACPI DIMM device with the necessary driver data so acpi_nvdimm_notify() fails this lookup: nfit_mem = dev_get_drvdata(dev); if (nfit_mem && nfit_mem->flags_attr) sysfs_notify_dirent(nfit_mem->flags_attr); Add the necessary linkage when installing the notification handler and clean it up when the nfit driver instance is torn down. Cc: Cc: Toshi Kani Cc: Vishal Verma Fixes: ba9c8dd3c222 ("acpi, nfit: add dimm device notification support") Reported-by: Daniel Osawa Tested-by: Daniel Osawa Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index ff2580e7611d..abeb4df4f22e 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -1670,6 +1670,11 @@ static int acpi_nfit_add_dimm(struct acpi_nfit_desc *acpi_desc, dev_name(&adev_dimm->dev)); return -ENXIO; } + /* + * Record nfit_mem for the notification path to track back to + * the nfit sysfs attributes for this dimm device object. + */ + dev_set_drvdata(&adev_dimm->dev, nfit_mem); /* * Until standardization materializes we need to consider 4 @@ -1752,9 +1757,11 @@ static void shutdown_dimm_notify(void *data) sysfs_put(nfit_mem->flags_attr); nfit_mem->flags_attr = NULL; } - if (adev_dimm) + if (adev_dimm) { acpi_remove_notify_handler(adev_dimm->handle, ACPI_DEVICE_NOTIFY, acpi_nvdimm_notify); + dev_set_drvdata(&adev_dimm->dev, NULL); + } } mutex_unlock(&acpi_desc->init_mutex); } -- cgit v1.2.3-71-gd317 From ce179cbdedf2f54306177e591664be7b18cf386a Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Mon, 4 Dec 2017 17:01:20 +0800 Subject: ahci: qoriq: refine port register configuration These PP2C and PP3C registers control the configuration of the PHY control OOB timing for the COMINIT/COMWAKE parameters respectively for sata port. Overwrite default values with calculated ones to get better OOB timing. Signed-off-by: Tang Yuantian Signed-off-by: Tejun Heo --- drivers/ata/ahci_qoriq.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index b6b0bf76dfc7..2685f28160f7 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -35,6 +35,8 @@ /* port register default value */ #define AHCI_PORT_PHY_1_CFG 0xa003fffe +#define AHCI_PORT_PHY2_CFG 0x28184d1f +#define AHCI_PORT_PHY3_CFG 0x0e081509 #define AHCI_PORT_TRANS_CFG 0x08000029 #define AHCI_PORT_AXICC_CFG 0x3fffffff @@ -183,6 +185,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); @@ -190,6 +194,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) case AHCI_LS2080A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); @@ -201,6 +207,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); @@ -212,6 +220,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); @@ -219,6 +229,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) case AHCI_LS2088A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); -- cgit v1.2.3-71-gd317 From 2467c0451ce5574738e223b93e3253c9a7015be1 Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Fri, 1 Dec 2017 11:47:22 +0100 Subject: ahci: mtk: Change driver name to ahci-mtk The driver name "ahci" is already used by the ahci platform driver. This leads to the following error: Error: Driver 'ahci' is already registered, aborting... Change the name to ahci-mtk to fix this. Signed-off-by: Matthias Brugger Signed-off-by: Tejun Heo --- drivers/ata/ahci_mtk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c index 489452a64303..0ae6971c2a4c 100644 --- a/drivers/ata/ahci_mtk.c +++ b/drivers/ata/ahci_mtk.c @@ -25,7 +25,7 @@ #include #include "ahci.h" -#define DRV_NAME "ahci" +#define DRV_NAME "ahci-mtk" #define SYS_CFG 0x14 #define SYS_CFG_SATA_MSK GENMASK(31, 30) -- cgit v1.2.3-71-gd317 From 2dc0b46b5ea30f169b0b272253ea846a5a281731 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Tue, 14 Nov 2017 16:17:25 -0600 Subject: libata: sata_down_spd_limit should return if driver has not recorded sstatus speed During hotplug, it is possible for 6Gbps link speed to be limited all the way down to 1.5 Gbps which may lead to a slower link speed when drive is re-connected. This behavior has been seen on a Intel Lewisburg SATA controller (8086:a1d2) with HGST HUH728080ALE600 drive where SATA link speed was limited to 1.5 Gbps and when re-connected the link came up 3.0 Gbps. This patch was retested on above configuration and showed the hotplugged link to come back online at max speed (6Gbps). I did not see the downgrade when testing on Intel C600/X79, but retested patched linux-4.14-rc5 kernel and didn't see any side effects from this change. Also, successfully retested hotplug on port multiplier 3Gbps link. tj: Minor comment updates. Signed-off-by: David Milburn Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2a882929de4a..8193b38a1cae 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3082,13 +3082,19 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) bit = fls(mask) - 1; mask &= ~(1 << bit); - /* Mask off all speeds higher than or equal to the current - * one. Force 1.5Gbps if current SPD is not available. + /* + * Mask off all speeds higher than or equal to the current one. At + * this point, if current SPD is not available and we previously + * recorded the link speed from SStatus, the driver has already + * masked off the highest bit so mask should already be 1 or 0. + * Otherwise, we should not force 1.5Gbps on a link where we have + * not previously recorded speed from SStatus. Just return in this + * case. */ if (spd > 1) mask &= (1 << (spd - 1)) - 1; else - mask &= 1; + return -EINVAL; /* were we already at the bottom? */ if (!mask) -- cgit v1.2.3-71-gd317 From ba69ead9e9e9bb3cec5faf03526c36764ac8942a Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Mon, 27 Nov 2017 23:47:34 +0100 Subject: scsi: scsi_devinfo: handle non-terminated strings devinfo->vendor and devinfo->model aren't necessarily zero-terminated. Fixes: b8018b973c7c "scsi_devinfo: fixup string compare" Signed-off-by: Martin Wilck Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 78d4aa8df675..b256d4cbd3ad 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -458,7 +458,8 @@ static struct scsi_dev_info_list *scsi_dev_info_list_find(const char *vendor, /* * vendor strings must be an exact match */ - if (vmax != strlen(devinfo->vendor) || + if (vmax != strnlen(devinfo->vendor, + sizeof(devinfo->vendor)) || memcmp(devinfo->vendor, vskip, vmax)) continue; @@ -466,7 +467,7 @@ static struct scsi_dev_info_list *scsi_dev_info_list_find(const char *vendor, * @model specifies the full string, and * must be larger or equal to devinfo->model */ - mlen = strlen(devinfo->model); + mlen = strnlen(devinfo->model, sizeof(devinfo->model)); if (mmax < mlen || memcmp(devinfo->model, mskip, mlen)) continue; return devinfo; -- cgit v1.2.3-71-gd317 From 81df022b688d43d2a3667518b2f755d384397910 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Mon, 27 Nov 2017 23:47:35 +0100 Subject: scsi: scsi_devinfo: cleanly zero-pad devinfo strings Cleanly fill memory for "vendor" and "model" with 0-bytes for the "compatible" case rather than adding only a single 0 byte. This simplifies the devinfo code a a bit, and avoids mistakes in other places of the code (not in current upstream, but we had one such mistake in the SUSE kernel). [mkp: applied by hand and added braces] Signed-off-by: Martin Wilck Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index b256d4cbd3ad..449ef5adbb2b 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -34,7 +34,6 @@ struct scsi_dev_info_list_table { }; -static const char spaces[] = " "; /* 16 of them */ static blist_flags_t scsi_default_dev_flags; static LIST_HEAD(scsi_dev_info_list); static char scsi_dev_flags[256]; @@ -298,20 +297,13 @@ static void scsi_strcpy_devinfo(char *name, char *to, size_t to_length, size_t from_length; from_length = strlen(from); - strncpy(to, from, min(to_length, from_length)); - if (from_length < to_length) { - if (compatible) { - /* - * NUL terminate the string if it is short. - */ - to[from_length] = '\0'; - } else { - /* - * space pad the string if it is short. - */ - strncpy(&to[from_length], spaces, - to_length - from_length); - } + /* This zero-pads the destination */ + strncpy(to, from, to_length); + if (from_length < to_length && !compatible) { + /* + * space pad the string if it is short. + */ + memset(&to[from_length], ' ', to_length - from_length); } if (from_length > to_length) printk(KERN_WARNING "%s: %s string '%s' is too long\n", -- cgit v1.2.3-71-gd317 From be17f1ce8572d6e15559897421fb7041360bb64a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 30 Nov 2017 15:49:10 +0100 Subject: mmc: core: properly init drv_type When the latest version of parsing the new eMMC bindings was moved from core.c to mmc.c, it was overlooked that drv_type could be used uninitialized. Fix it! Fixes: 6186d06c519e21 ("mmc: parse new binding for eMMC fixed driver type") Reported-by: Colin Ian King Reported-by: Dan Carpenter Signed-off-by: Wolfram Sang Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index d209fb466979..208a762b87ef 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1290,7 +1290,7 @@ out_err: static void mmc_select_driver_type(struct mmc_card *card) { - int card_drv_type, drive_strength, drv_type; + int card_drv_type, drive_strength, drv_type = 0; int fixed_drv_type = card->host->fixed_drv_type; card_drv_type = card->ext_csd.raw_driver_strength | -- cgit v1.2.3-71-gd317 From 588fb54b0cc5be5fd2e12bb04810534ffc3d49cc Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 30 Nov 2017 13:14:51 +0100 Subject: clk: Manage proper runtime PM state in clk_change_rate() clk_change_rate() propagates rate change down to all its children. Such operation requires managing proper runtime PM state of each child, what was missing. Add needed calls to clk_pm_runtime*() to ensure that set_rate() clock callback is called on runtime active clock. This fixes following issue found on Exynos5433 TM2 board with devfreq enabled: Synchronous External Abort: synchronous external abort (0x96000210) at 0xffffff80093f5600 Internal error: : 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.15.0-rc1-next-20171129+ #4 Hardware name: Samsung TM2 board (DT) Workqueue: devfreq_wq devfreq_monitor task: ffffffc0ca96b600 task.stack: ffffff80093a8000 pstate: a0000085 (NzCv daIf -PAN -UAO) pc : clk_divider_set_rate+0x54/0x118 lr : clk_divider_set_rate+0x44/0x118 ... Process kworker/u16:0 (pid: 5, stack limit = 0xffffff80093a8000) Call trace: clk_divider_set_rate+0x54/0x118 clk_change_rate+0xfc/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_core_set_rate_nolock+0x138/0x148 clk_set_rate+0x28/0x50 exynos_bus_passive_target+0x6c/0x11c update_devfreq_passive+0x58/0xb4 devfreq_passive_notifier_call+0x50/0x5c notifier_call_chain+0x4c/0x88 __srcu_notifier_call_chain+0x54/0x80 srcu_notifier_call_chain+0x14/0x1c update_devfreq+0x100/0x1b4 devfreq_monitor+0x2c/0x88 process_one_work+0x148/0x3d8 worker_thread+0x13c/0x3f8 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Reported-by: Chanwoo Choi Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Marek Szyprowski Reviewed-by: Ulf Hansson Tested-by: Chanwoo Choi Reviewed-by: Chanwoo Choi Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 647d056df88c..8a1860a36c77 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1564,6 +1564,9 @@ static void clk_change_rate(struct clk_core *core) best_parent_rate = core->parent->rate; } + if (clk_pm_runtime_get(core)) + return; + if (core->flags & CLK_SET_RATE_UNGATE) { unsigned long flags; @@ -1634,6 +1637,8 @@ static void clk_change_rate(struct clk_core *core) /* handle the new child who might not be in core->children yet */ if (core->new_child) clk_change_rate(core->new_child); + + clk_pm_runtime_put(core); } static int clk_core_set_rate_nolock(struct clk_core *core, -- cgit v1.2.3-71-gd317 From 7f6d2ecd3d7acaf205ea7b3e96f9ffc55b92298b Mon Sep 17 00:00:00 2001 From: David Lechner Date: Sun, 3 Dec 2017 19:54:41 -0600 Subject: eeprom: at24: change nvmem stride to 1 Trying to read the MAC address from an eeprom that has an offset that is not a multiple of 4 causes an error currently. Fix it by changing the nvmem stride to 1. Cc: stable@vger.kernel.org Signed-off-by: David Lechner [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski --- drivers/misc/eeprom/at24.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 20b4f26d30d7..4d63ac8a82e0 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -876,7 +876,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->nvmem_config.reg_read = at24_read; at24->nvmem_config.reg_write = at24_write; at24->nvmem_config.priv = at24; - at24->nvmem_config.stride = 4; + at24->nvmem_config.stride = 1; at24->nvmem_config.word_size = 1; at24->nvmem_config.size = chip.byte_len; -- cgit v1.2.3-71-gd317 From 4f7f5551a760eb0124267be65763008169db7087 Mon Sep 17 00:00:00 2001 From: Masamitsu Yamazaki Date: Wed, 15 Nov 2017 07:33:14 +0000 Subject: ipmi: Stop timers before cleaning up the module System may crash after unloading ipmi_si.ko module because a timer may remain and fire after the module cleaned up resources. cleanup_one_si() contains the following processing. /* * Make sure that interrupts, the timer and the thread are * stopped and will not run again. */ if (to_clean->irq_cleanup) to_clean->irq_cleanup(to_clean); wait_for_timer_and_thread(to_clean); /* * Timeouts are stopped, now make sure the interrupts are off * in the BMC. Note that timers and CPU interrupts are off, * so no need for locks. */ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); } si_state changes as following in the while loop calling poll(to_clean). SI_GETTING_MESSAGES => SI_CHECKING_ENABLES => SI_SETTING_ENABLES => SI_GETTING_EVENTS => SI_NORMAL As written in the code comments above, timers are expected to stop before the polling loop and not to run again. But the timer is set again in the following process when si_state becomes SI_SETTING_ENABLES. => poll => smi_event_handler => handle_transaction_done // smi_info->si_state == SI_SETTING_ENABLES => start_getting_events => start_new_msg => smi_mod_timer => mod_timer As a result, before the timer set in start_new_msg() expires, the polling loop may see si_state becoming SI_NORMAL and the module clean-up finishes. For example, hard LOCKUP and panic occurred as following. smi_timeout was called after smi_event_handler, kcs_event and hangs at port_inb() trying to access I/O port after release. [exception RIP: port_inb+19] RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006 RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000 RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40 RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426 R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000 R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 --- --- To fix the problem I defined a flag, timer_can_start, as member of struct smi_info. The flag is enabled immediately after initializing the timer and disabled immediately before waiting for timer deletion. Fixes: 0cfec916e86d ("ipmi: Start the timer and thread on internal msgs") Signed-off-by: Yamazaki Masamitsu [Adjusted for recent changes in the driver.] Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_si_intf.c | 44 +++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 71d33a1807e4..99b0513bb55b 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -199,6 +199,9 @@ struct smi_info { /* The timer for this si. */ struct timer_list si_timer; + /* This flag is set, if the timer can be set */ + bool timer_can_start; + /* This flag is set, if the timer is running (timer_pending() isn't enough) */ bool timer_running; @@ -355,6 +358,8 @@ out: static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val) { + if (!smi_info->timer_can_start) + return; smi_info->last_timeout_jiffies = jiffies; mod_timer(&smi_info->si_timer, new_val); smi_info->timer_running = true; @@ -374,21 +379,18 @@ static void start_new_msg(struct smi_info *smi_info, unsigned char *msg, smi_info->handlers->start_transaction(smi_info->si_sm, msg, size); } -static void start_check_enables(struct smi_info *smi_info, bool start_timer) +static void start_check_enables(struct smi_info *smi_info) { unsigned char msg[2]; msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; - if (start_timer) - start_new_msg(smi_info, msg, 2); - else - smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + start_new_msg(smi_info, msg, 2); smi_info->si_state = SI_CHECKING_ENABLES; } -static void start_clear_flags(struct smi_info *smi_info, bool start_timer) +static void start_clear_flags(struct smi_info *smi_info) { unsigned char msg[3]; @@ -397,10 +399,7 @@ static void start_clear_flags(struct smi_info *smi_info, bool start_timer) msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; msg[2] = WDT_PRE_TIMEOUT_INT; - if (start_timer) - start_new_msg(smi_info, msg, 3); - else - smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); + start_new_msg(smi_info, msg, 3); smi_info->si_state = SI_CLEARING_FLAGS; } @@ -435,11 +434,11 @@ static void start_getting_events(struct smi_info *smi_info) * Note that we cannot just use disable_irq(), since the interrupt may * be shared. */ -static inline bool disable_si_irq(struct smi_info *smi_info, bool start_timer) +static inline bool disable_si_irq(struct smi_info *smi_info) { if ((smi_info->io.irq) && (!smi_info->interrupt_disabled)) { smi_info->interrupt_disabled = true; - start_check_enables(smi_info, start_timer); + start_check_enables(smi_info); return true; } return false; @@ -449,7 +448,7 @@ static inline bool enable_si_irq(struct smi_info *smi_info) { if ((smi_info->io.irq) && (smi_info->interrupt_disabled)) { smi_info->interrupt_disabled = false; - start_check_enables(smi_info, true); + start_check_enables(smi_info); return true; } return false; @@ -467,7 +466,7 @@ static struct ipmi_smi_msg *alloc_msg_handle_irq(struct smi_info *smi_info) msg = ipmi_alloc_smi_msg(); if (!msg) { - if (!disable_si_irq(smi_info, true)) + if (!disable_si_irq(smi_info)) smi_info->si_state = SI_NORMAL; } else if (enable_si_irq(smi_info)) { ipmi_free_smi_msg(msg); @@ -483,7 +482,7 @@ retry: /* Watchdog pre-timeout */ smi_inc_stat(smi_info, watchdog_pretimeouts); - start_clear_flags(smi_info, true); + start_clear_flags(smi_info); smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; if (smi_info->intf) ipmi_smi_watchdog_pretimeout(smi_info->intf); @@ -866,7 +865,7 @@ restart: * disable and messages disabled. */ if (smi_info->supports_event_msg_buff || smi_info->io.irq) { - start_check_enables(smi_info, true); + start_check_enables(smi_info); } else { smi_info->curr_msg = alloc_msg_handle_irq(smi_info); if (!smi_info->curr_msg) @@ -1167,6 +1166,7 @@ static int smi_start_processing(void *send_info, /* Set up the timer that drives the interface. */ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); + new_smi->timer_can_start = true; smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES); /* Try to claim any interrupts. */ @@ -1936,10 +1936,12 @@ static void check_for_broken_irqs(struct smi_info *smi_info) check_set_rcv_irq(smi_info); } -static inline void wait_for_timer_and_thread(struct smi_info *smi_info) +static inline void stop_timer_and_thread(struct smi_info *smi_info) { if (smi_info->thread != NULL) kthread_stop(smi_info->thread); + + smi_info->timer_can_start = false; if (smi_info->timer_running) del_timer_sync(&smi_info->si_timer); } @@ -2152,7 +2154,7 @@ static int try_smi_init(struct smi_info *new_smi) * Start clearing the flags before we enable interrupts or the * timer to avoid racing with the timer. */ - start_clear_flags(new_smi, false); + start_clear_flags(new_smi); /* * IRQ is defined to be set when non-zero. req_events will @@ -2238,7 +2240,7 @@ out_err_remove_attrs: dev_set_drvdata(new_smi->io.dev, NULL); out_err_stop_timer: - wait_for_timer_and_thread(new_smi); + stop_timer_and_thread(new_smi); out_err: new_smi->interrupt_disabled = true; @@ -2388,7 +2390,7 @@ static void cleanup_one_si(struct smi_info *to_clean) */ if (to_clean->io.irq_cleanup) to_clean->io.irq_cleanup(&to_clean->io); - wait_for_timer_and_thread(to_clean); + stop_timer_and_thread(to_clean); /* * Timeouts are stopped, now make sure the interrupts are off @@ -2400,7 +2402,7 @@ static void cleanup_one_si(struct smi_info *to_clean) schedule_timeout_uninterruptible(1); } if (to_clean->handlers) - disable_si_irq(to_clean, false); + disable_si_irq(to_clean); while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); -- cgit v1.2.3-71-gd317 From aece09024414b54158e03aa45f4a4436e7cb996c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 5 Dec 2017 17:37:17 +0300 Subject: staging: ccree: Uninitialized return in ssi_ahash_import() The return value isn't initialized on some success paths. Fixes: c5f39d07860c ("staging: ccree: fix leak of import() after init()") Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ccree/ssi_hash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/ccree/ssi_hash.c b/drivers/staging/ccree/ssi_hash.c index 1799d3f26a9e..2035835b62dc 100644 --- a/drivers/staging/ccree/ssi_hash.c +++ b/drivers/staging/ccree/ssi_hash.c @@ -1769,7 +1769,7 @@ static int ssi_ahash_import(struct ahash_request *req, const void *in) struct device *dev = drvdata_to_dev(ctx->drvdata); struct ahash_req_ctx *state = ahash_request_ctx(req); u32 tmp; - int rc; + int rc = 0; memcpy(&tmp, in, sizeof(u32)); if (tmp != CC_EXPORT_MAGIC) { -- cgit v1.2.3-71-gd317 From 202fc673c626e4ffe6b888c469b248ecc6d50265 Mon Sep 17 00:00:00 2001 From: Marcus Wolf Date: Wed, 8 Nov 2017 19:13:56 +0200 Subject: staging: pi433: Fixes issue with bit shift in rf69_get_modulation Fixes issue with bit shift in rf69_get_modulation Signed-off-by: Marcus Wolf Signed-off-by: Greg Kroah-Hartman --- drivers/staging/pi433/rf69.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c index e69a2153c999..12c9df9cddde 100644 --- a/drivers/staging/pi433/rf69.c +++ b/drivers/staging/pi433/rf69.c @@ -102,7 +102,7 @@ enum modulation rf69_get_modulation(struct spi_device *spi) currentValue = READ_REG(REG_DATAMODUL); - switch (currentValue & MASK_DATAMODUL_MODULATION_TYPE >> 3) { // TODO improvement: change 3 to define + switch (currentValue & MASK_DATAMODUL_MODULATION_TYPE) { case DATAMODUL_MODULATION_TYPE_OOK: return OOK; case DATAMODUL_MODULATION_TYPE_FSK: return FSK; default: return undefined; -- cgit v1.2.3-71-gd317 From 7cb4774e2d3282d29edd00762167876a27cc7d2a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 6 Dec 2017 17:54:38 +0100 Subject: HID: core: lower log level for unknown main item tags to warnings Given all the effort distros have done with splash-screens to give users a nice clean boot experience, we really want dmesg --level=err to not print anything unless there is a real problem with either the hardware or the kernel. Buggy HID descriptors unfortunately happen all too often, so lower the log level to warning keep the console clear of error messages such as: [ 441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0 Signed-off-by: Hans de Goede Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index f3fcb836a1f9..0c3f608131cf 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -551,7 +551,7 @@ static int hid_parser_main(struct hid_parser *parser, struct hid_item *item) ret = hid_add_field(parser, HID_FEATURE_REPORT, data); break; default: - hid_err(parser->device, "unknown main item tag 0x%x\n", item->tag); + hid_warn(parser->device, "unknown main item tag 0x%x\n", item->tag); ret = 0; } -- cgit v1.2.3-71-gd317 From 04271ce9601f1686db480ea11ea1848394d9e6a2 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Tue, 28 Nov 2017 15:55:07 +0530 Subject: i2c-cht-wc: constify platform_device_id platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav Reviewed-by: Hans de Goede Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cht-wc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 0d05dadb2dc5..44cffad43701 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -379,7 +379,7 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) return 0; } -static struct platform_device_id cht_wc_i2c_adap_id_table[] = { +static const struct platform_device_id cht_wc_i2c_adap_id_table[] = { { .name = "cht_wcove_ext_chgr" }, {}, }; -- cgit v1.2.3-71-gd317 From b458a3490e46dddd5b63f59b458c9b6d2284a63f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Dec 2017 11:09:21 +0100 Subject: spi: rspi: Do not set SPCR_SPE in qspi_set_config_register() The R-Car Gen2 Hardware User Manual Rev. 2.00 states: If the master/slave mode select bit (MSTR) is modified while the SPI function enable bit (SPE) is set to 1 (that is, this module is enabled), the subsequent operation cannot be guaranteed. Hence do not set SPCR_SPE when setting SPCR_MSTR, just like the .set_config_register() implementations for other RSPI variants do. Note that when booted from QSPI, the boot loader will have set SPCR_MSTR already, hence usually the bit is never modified by the Linux driver. Reported-by: Yoshihiro Shimoda Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 2ce875764ca6..0835a8d88fb8 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -377,8 +377,8 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) /* Sets SPCMD */ rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); - /* Enables SPI function in master mode */ - rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR); + /* Sets RSPI mode */ + rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); return 0; } -- cgit v1.2.3-71-gd317 From c810daba0ab5226084a56893a789af427a801146 Mon Sep 17 00:00:00 2001 From: Takuo Koguchi Date: Thu, 7 Dec 2017 16:20:14 +0900 Subject: spi: sun4i: disable clocks in the remove function mclk and hclk need to be disabled. Since pm_runtime_disable does not disable the clocks, use pm_runtime_force_suspend instead. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Takuo Koguchi Acked-by: Maxime Ripard Signed-off-by: Mark Brown --- drivers/spi/spi-sun4i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index c5cd635c28f3..41410031f8e9 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -525,7 +525,7 @@ err_free_master: static int sun4i_spi_remove(struct platform_device *pdev) { - pm_runtime_disable(&pdev->dev); + pm_runtime_force_suspend(&pdev->dev); return 0; } -- cgit v1.2.3-71-gd317 From 4cae8ff136782d77b108cb3a5ba53e60597ba3a6 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Tue, 5 Dec 2017 22:30:01 +0200 Subject: IB/core: Bound check alternate path port number The alternate port number is used as an array index in the IB security implementation, invalid values can result in a kernel panic. Cc: # v4.12 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Signed-off-by: Daniel Jurgens Reviewed-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/uverbs_cmd.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 16d55710b116..d0202bb176a4 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1971,6 +1971,12 @@ static int modify_qp(struct ib_uverbs_file *file, goto release_qp; } + if ((cmd->base.attr_mask & IB_QP_ALT_PATH) && + !rdma_is_port_valid(qp->device, cmd->base.alt_port_num)) { + ret = -EINVAL; + goto release_qp; + } + attr->qp_state = cmd->base.qp_state; attr->cur_qp_state = cmd->base.cur_qp_state; attr->path_mtu = cmd->base.path_mtu; -- cgit v1.2.3-71-gd317 From 0fbe8f575b15585eec3326e43708fbbc024e8486 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Tue, 5 Dec 2017 22:30:02 +0200 Subject: IB/core: Don't enforce PKey security on SMI MADs Per the infiniband spec an SMI MAD can have any PKey. Checking the pkey on SMI MADs is not necessary, and it seems that some older adapters using the mthca driver don't follow the convention of using the default PKey, resulting in false denials, or errors querying the PKey cache. SMI MAD security is still enforced, only agents allowed to manage the subnet are able to receive or send SMI MADs. Reported-by: Chris Blake Cc: # v4.12 Fixes: 47a2b338fe63 ("IB/core: Enforce security on management datagrams") Signed-off-by: Daniel Jurgens Reviewed-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/security.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/security.c b/drivers/infiniband/core/security.c index a337386652b0..feafdb961c48 100644 --- a/drivers/infiniband/core/security.c +++ b/drivers/infiniband/core/security.c @@ -739,8 +739,11 @@ int ib_mad_enforce_security(struct ib_mad_agent_private *map, u16 pkey_index) if (!rdma_protocol_ib(map->agent.device, map->agent.port_num)) return 0; - if (map->agent.qp->qp_type == IB_QPT_SMI && !map->agent.smp_allowed) - return -EACCES; + if (map->agent.qp->qp_type == IB_QPT_SMI) { + if (!map->agent.smp_allowed) + return -EACCES; + return 0; + } return ib_security_pkey_access(map->agent.device, map->agent.port_num, -- cgit v1.2.3-71-gd317 From 4d02ebd9bbbdde1d524e62b540b0402cee7bbcdf Mon Sep 17 00:00:00 2001 From: Guy Levi Date: Tue, 5 Dec 2017 22:30:03 +0200 Subject: IB/mlx4: Fix RSS hash fields restrictions Mistakenly the driver didn't allow RSS hash fields combinations which involve both IPv4 and IPv6 protocols. This bug caused to failures for user's use cases for RSS. Consequently, this patch fixes this bug and allows any combination that the HW can support. Additionally, the patch fixes the driver to return an error in case the user provides an unsupported mask for RSS hash fields. Fixes: 3078f5f1bd8b ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/qp.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 013049bcdb53..caf490ab24c8 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -666,6 +666,19 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx, return (-EOPNOTSUPP); } + if (ucmd->rx_hash_fields_mask & ~(MLX4_IB_RX_HASH_SRC_IPV4 | + MLX4_IB_RX_HASH_DST_IPV4 | + MLX4_IB_RX_HASH_SRC_IPV6 | + MLX4_IB_RX_HASH_DST_IPV6 | + MLX4_IB_RX_HASH_SRC_PORT_TCP | + MLX4_IB_RX_HASH_DST_PORT_TCP | + MLX4_IB_RX_HASH_SRC_PORT_UDP | + MLX4_IB_RX_HASH_DST_PORT_UDP)) { + pr_debug("RX Hash fields_mask has unsupported mask (0x%llx)\n", + ucmd->rx_hash_fields_mask); + return (-EOPNOTSUPP); + } + if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_IPV4) && (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_IPV4)) { rss_ctx->flags = MLX4_RSS_IPV4; @@ -691,11 +704,11 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx, return (-EOPNOTSUPP); } - if (rss_ctx->flags & MLX4_RSS_IPV4) { + if (rss_ctx->flags & MLX4_RSS_IPV4) rss_ctx->flags |= MLX4_RSS_UDP_IPV4; - } else if (rss_ctx->flags & MLX4_RSS_IPV6) { + if (rss_ctx->flags & MLX4_RSS_IPV6) rss_ctx->flags |= MLX4_RSS_UDP_IPV6; - } else { + if (!(rss_ctx->flags & (MLX4_RSS_IPV6 | MLX4_RSS_IPV4))) { pr_debug("RX Hash fields_mask is not supported - UDP must be set with IPv4 or IPv6\n"); return (-EOPNOTSUPP); } @@ -707,15 +720,14 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx, if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_PORT_TCP) && (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_PORT_TCP)) { - if (rss_ctx->flags & MLX4_RSS_IPV4) { + if (rss_ctx->flags & MLX4_RSS_IPV4) rss_ctx->flags |= MLX4_RSS_TCP_IPV4; - } else if (rss_ctx->flags & MLX4_RSS_IPV6) { + if (rss_ctx->flags & MLX4_RSS_IPV6) rss_ctx->flags |= MLX4_RSS_TCP_IPV6; - } else { + if (!(rss_ctx->flags & (MLX4_RSS_IPV6 | MLX4_RSS_IPV4))) { pr_debug("RX Hash fields_mask is not supported - TCP must be set with IPv4 or IPv6\n"); return (-EOPNOTSUPP); } - } else if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_PORT_TCP) || (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_PORT_TCP)) { pr_debug("RX Hash fields_mask is not supported - both TCP SRC and DST must be set\n"); -- cgit v1.2.3-71-gd317 From d0e312fe3d34c1bc014a7f8ec6540d05e8077483 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 5 Dec 2017 22:30:04 +0200 Subject: RDMA/netlink: Fix general protection fault The RDMA netlink core code checks validity of messages by ensuring that type and operand are in range. It works well for almost all clients except NLDEV, which has cb_table less than number of operands. Request to access such operand will trigger the following kernel panic. This patch updates all places where cb_table is declared for the consistency, but only NLDEV is actually need it. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 task: ffff8800657799c0 task.stack: ffff8800695d000 RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0 RSP: 0018:ffff8800695d7838 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7 RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000 R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0 FS: 00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rdma_nl_multicast+0x80/0x80 rdma_nl_rcv+0x36b/0x4d0 ? ibnl_put_attr+0xc0/0xc0 netlink_unicast+0x4bd/0x6d0 ? netlink_sendskb+0x50/0x50 ? drop_futex_key_refs.isra.4+0x68/0xb0 netlink_sendmsg+0x9ab/0xbd0 ? nlmsg_notify+0x140/0x140 ? wake_up_q+0xa1/0xf0 ? drop_futex_key_refs.isra.4+0x68/0xb0 sock_sendmsg+0x88/0xd0 sock_write_iter+0x228/0x3c0 ? sock_sendmsg+0xd0/0xd0 ? do_futex+0x3e5/0xb20 ? iov_iter_init+0xaf/0x1d0 __vfs_write+0x46e/0x640 ? sched_clock_cpu+0x1b/0x190 ? __vfs_read+0x620/0x620 ? __fget+0x23a/0x390 ? rw_verify_area+0xca/0x290 vfs_write+0x192/0x490 SyS_write+0xde/0x1c0 ? SyS_read+0x1c0/0x1c0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fee6a74a219 RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219 RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98 R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838 ---[ end trace ba085d123959c8ec ]--- Kernel panic - not syncing: Fatal exception Cc: syzkaller Fixes: b4c598a67ea1 ("RDMA/netlink: Implement nldev device dumpit calback") Reviewed-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 2 +- drivers/infiniband/core/device.c | 2 +- drivers/infiniband/core/iwcm.c | 2 +- drivers/infiniband/core/nldev.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index f6983357145d..6294a7001d33 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -4458,7 +4458,7 @@ out: return skb->len; } -static const struct rdma_nl_cbs cma_cb_table[] = { +static const struct rdma_nl_cbs cma_cb_table[RDMA_NL_RDMA_CM_NUM_OPS] = { [RDMA_NL_RDMA_CM_ID_STATS] = { .dump = cma_get_id_stats}, }; diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 5e1be4949d5f..30914f3baa5f 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -1146,7 +1146,7 @@ struct net_device *ib_get_net_dev_by_params(struct ib_device *dev, } EXPORT_SYMBOL(ib_get_net_dev_by_params); -static const struct rdma_nl_cbs ibnl_ls_cb_table[] = { +static const struct rdma_nl_cbs ibnl_ls_cb_table[RDMA_NL_LS_NUM_OPS] = { [RDMA_NL_LS_OP_RESOLVE] = { .doit = ib_nl_handle_resolve_resp, .flags = RDMA_NL_ADMIN_PERM, diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c index e9e189ec7502..5d676cff41f4 100644 --- a/drivers/infiniband/core/iwcm.c +++ b/drivers/infiniband/core/iwcm.c @@ -80,7 +80,7 @@ const char *__attribute_const__ iwcm_reject_msg(int reason) } EXPORT_SYMBOL(iwcm_reject_msg); -static struct rdma_nl_cbs iwcm_nl_cb_table[] = { +static struct rdma_nl_cbs iwcm_nl_cb_table[RDMA_NL_IWPM_NUM_OPS] = { [RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb}, [RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb}, [RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb}, diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c index 2fae850a3eff..9a05245a1acf 100644 --- a/drivers/infiniband/core/nldev.c +++ b/drivers/infiniband/core/nldev.c @@ -303,7 +303,7 @@ out: cb->args[0] = idx; return skb->len; } -static const struct rdma_nl_cbs nldev_cb_table[] = { +static const struct rdma_nl_cbs nldev_cb_table[RDMA_NLDEV_NUM_OPS] = { [RDMA_NLDEV_CMD_GET] = { .doit = nldev_get_doit, .dump = nldev_get_dumpit, -- cgit v1.2.3-71-gd317 From 335ebf6fa35ca1c59b73f76fad19b249d3550e86 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 30 Nov 2017 09:41:56 -0800 Subject: iw_cxgb4: only clear the ARMED bit if a notification is needed In __flush_qp(), the CQ ARMED bit was being cleared regardless of whether any notification is actually needed. This resulted in the iser termination logic getting stuck in ib_drain_sq() because the CQ was not marked ARMED and thus the drain CQE notification wasn't triggered. This new bug was exposed when this commit was merged: commit cbb40fadd31c ("iw_cxgb4: only call the cq comp_handler when the cq is armed") Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/qp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 5ee7fe433136..355e288ec969 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1285,21 +1285,21 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp, spin_unlock_irqrestore(&rchp->lock, flag); if (schp == rchp) { - if (t4_clear_cq_armed(&rchp->cq) && - (rq_flushed || sq_flushed)) { + if ((rq_flushed || sq_flushed) && + t4_clear_cq_armed(&rchp->cq)) { spin_lock_irqsave(&rchp->comp_handler_lock, flag); (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); spin_unlock_irqrestore(&rchp->comp_handler_lock, flag); } } else { - if (t4_clear_cq_armed(&rchp->cq) && rq_flushed) { + if (rq_flushed && t4_clear_cq_armed(&rchp->cq)) { spin_lock_irqsave(&rchp->comp_handler_lock, flag); (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); spin_unlock_irqrestore(&rchp->comp_handler_lock, flag); } - if (t4_clear_cq_armed(&schp->cq) && sq_flushed) { + if (sq_flushed && t4_clear_cq_armed(&schp->cq)) { spin_lock_irqsave(&schp->comp_handler_lock, flag); (*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context); -- cgit v1.2.3-71-gd317 From 7e70aa789d4a0c89dbfbd2c8a974a4df717475ec Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 5 Dec 2017 15:52:56 +0800 Subject: scsi: core: run queue if SCSI device queue isn't ready and queue is idle MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before commit 0df21c86bdbf ("scsi: implement .get_budget and .put_budget for blk-mq"), we run queue after 3ms if queue is idle and SCSI device queue isn't ready, which is done in handling BLK_STS_RESOURCE. After commit 0df21c86bdbf is introduced, queue won't be run any more under this situation. IO hang is observed when timeout happened, and this patch fixes the IO hang issue by running queue after delay in scsi_dev_queue_ready, just like non-mq. This issue can be triggered by the following script[1]. There is another issue which can be covered by running idle queue: when .get_budget() is called on request coming from hctx->dispatch_list, if one request just completes during .get_budget(), we can't depend on SCSI's restart to make progress any more. This patch fixes the race too. With this patch, we basically recover to previous behaviour (before commit 0df21c86bdbf) of handling idle queue when running out of resource. [1] script for test/verify SCSI timeout rmmod scsi_debug modprobe scsi_debug max_queue=1 DEVICE=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` DISK_DIR=`ls -d /sys/block/$DEVICE/device/scsi_disk/*` echo "using scsi device $DEVICE" echo "-1" >/sys/bus/pseudo/drivers/scsi_debug/every_nth echo "temporary write through" >$DISK_DIR/cache_type echo "128" >/sys/bus/pseudo/drivers/scsi_debug/opts echo none > /sys/block/$DEVICE/queue/scheduler dd if=/dev/$DEVICE of=/dev/null bs=1M iflag=direct count=1 & sleep 5 echo "0" >/sys/bus/pseudo/drivers/scsi_debug/opts wait echo "SUCCESS" Fixes: 0df21c86bdbf ("scsi: implement .get_budget and .put_budget for blk-mq") Signed-off-by: Ming Lei Tested-by: Holger Hoffstätte Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 00742c50cd44..d9ca1dfab154 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1967,6 +1967,8 @@ static bool scsi_mq_get_budget(struct blk_mq_hw_ctx *hctx) out_put_device: put_device(&sdev->sdev_gendev); out: + if (atomic_read(&sdev->device_busy) == 0 && !scsi_device_blocked(sdev)) + blk_mq_delay_run_hw_queue(hctx, SCSI_QUEUE_DELAY); return false; } -- cgit v1.2.3-71-gd317 From 48d83282db077f93b2cf40de120f4d6f29eb293b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 6 Dec 2017 15:14:18 +0100 Subject: scsi: bfa: fix type conversion warning A regression fix introduced a harmless type mismatch warning: drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_vendor_request': drivers/scsi/bfa/bfad_bsg.c:3137:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion] struct bfad_im_port_s *im_port = shost->hostdata[0]; ^~~~~ drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_els_ct_request': drivers/scsi/bfa/bfad_bsg.c:3353:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion] struct bfad_im_port_s *im_port = shost->hostdata[0]; This changes the code back to shost_priv() once more, but encapsulates it in an inline function to document the rather unusual way of using the private data only as a pointer to the previously allocated structure. I did not try to get rid of the extra indirection level entirely, which would have been rather invasive and required reworking the entire initialization sequence. Fixes: 45349821ab3a ("scsi: bfa: fix access to bfad_im_port_s") Signed-off-by: Arnd Bergmann Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/bfa/bfad_bsg.c | 4 ++-- drivers/scsi/bfa/bfad_im.c | 6 ++++-- drivers/scsi/bfa/bfad_im.h | 10 ++++++++++ 3 files changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 09ef68c8225f..b2fa195adc7a 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -3136,7 +3136,7 @@ bfad_im_bsg_vendor_request(struct bsg_job *job) struct fc_bsg_reply *bsg_reply = job->reply; uint32_t vendor_cmd = bsg_request->rqst_data.h_vendor.vendor_cmd[0]; struct Scsi_Host *shost = fc_bsg_to_shost(job); - struct bfad_im_port_s *im_port = shost->hostdata[0]; + struct bfad_im_port_s *im_port = bfad_get_im_port(shost); struct bfad_s *bfad = im_port->bfad; void *payload_kbuf; int rc = -EINVAL; @@ -3352,7 +3352,7 @@ bfad_im_bsg_els_ct_request(struct bsg_job *job) { struct bfa_bsg_data *bsg_data; struct Scsi_Host *shost = fc_bsg_to_shost(job); - struct bfad_im_port_s *im_port = shost->hostdata[0]; + struct bfad_im_port_s *im_port = bfad_get_im_port(shost); struct bfad_s *bfad = im_port->bfad; bfa_bsg_fcpt_t *bsg_fcpt; struct bfad_fcxp *drv_fcxp; diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index 24e657a4ec80..c05d6e91e4bd 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -546,6 +546,7 @@ int bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port, struct device *dev) { + struct bfad_im_port_pointer *im_portp; int error = 1; mutex_lock(&bfad_mutex); @@ -564,7 +565,8 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port, goto out_free_idr; } - im_port->shost->hostdata[0] = (unsigned long)im_port; + im_portp = shost_priv(im_port->shost); + im_portp->p = im_port; im_port->shost->unique_id = im_port->idr_id; im_port->shost->this_id = -1; im_port->shost->max_id = MAX_FCP_TARGET; @@ -748,7 +750,7 @@ bfad_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad) sht->sg_tablesize = bfad->cfg_data.io_max_sge; - return scsi_host_alloc(sht, sizeof(unsigned long)); + return scsi_host_alloc(sht, sizeof(struct bfad_im_port_pointer)); } void diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h index c81ec2a77ef5..06ce4ba2b7bc 100644 --- a/drivers/scsi/bfa/bfad_im.h +++ b/drivers/scsi/bfa/bfad_im.h @@ -69,6 +69,16 @@ struct bfad_im_port_s { struct fc_vport *fc_vport; }; +struct bfad_im_port_pointer { + struct bfad_im_port_s *p; +}; + +static inline struct bfad_im_port_s *bfad_get_im_port(struct Scsi_Host *host) +{ + struct bfad_im_port_pointer *im_portp = shost_priv(host); + return im_portp->p; +} + enum bfad_itnim_state { ITNIM_STATE_NONE, ITNIM_STATE_ONLINE, -- cgit v1.2.3-71-gd317 From c1fd0abee0d52eb7e2871194b6c79d54792f515f Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 7 Dec 2017 22:42:27 -0500 Subject: dm mpath: fix bio-based multipath queue_if_no_path handling Commit ca5beb76 ("dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH") caused bio-based DM-multipath to fail mptest's "test_02_sdev_delete". Restoring the logic that existed prior to commit ca5beb76 fixes this bio-based DM-multipath regression. Also verified all mptest tests pass with request-based DM-multipath. This commit effectively reverts commit ca5beb76 -- but it does so without reintroducing the need to take the m->lock spinlock in must_push_back_{rq,bio}. Fixes: ca5beb76 ("dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 49 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 35a2a2fa477f..f7810cc869ac 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -457,6 +457,38 @@ do { \ dm_noflush_suspending((m)->ti)); \ } while (0) +/* + * Check whether bios must be queued in the device-mapper core rather + * than here in the target. + * + * If MPATHF_QUEUE_IF_NO_PATH and MPATHF_SAVED_QUEUE_IF_NO_PATH hold + * the same value then we are not between multipath_presuspend() + * and multipath_resume() calls and we have no need to check + * for the DMF_NOFLUSH_SUSPENDING flag. + */ +static bool __must_push_back(struct multipath *m, unsigned long flags) +{ + return ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &flags) != + test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &flags)) && + dm_noflush_suspending(m->ti)); +} + +/* + * Following functions use READ_ONCE to get atomic access to + * all m->flags to avoid taking spinlock + */ +static bool must_push_back_rq(struct multipath *m) +{ + unsigned long flags = READ_ONCE(m->flags); + return test_bit(MPATHF_QUEUE_IF_NO_PATH, &flags) || __must_push_back(m, flags); +} + +static bool must_push_back_bio(struct multipath *m) +{ + unsigned long flags = READ_ONCE(m->flags); + return __must_push_back(m, flags); +} + /* * Map cloned requests (request-based multipath) */ @@ -478,7 +510,7 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq, pgpath = choose_pgpath(m, nr_bytes); if (!pgpath) { - if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) + if (must_push_back_rq(m)) return DM_MAPIO_DELAY_REQUEUE; dm_report_EIO(m); /* Failed */ return DM_MAPIO_KILL; @@ -553,7 +585,7 @@ static int __multipath_map_bio(struct multipath *m, struct bio *bio, struct dm_m } if (!pgpath) { - if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) + if (must_push_back_bio(m)) return DM_MAPIO_REQUEUE; dm_report_EIO(m); return DM_MAPIO_KILL; @@ -651,8 +683,7 @@ static int queue_if_no_path(struct multipath *m, bool queue_if_no_path, assign_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags, (save_old_value && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) || (!save_old_value && queue_if_no_path)); - assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags, - queue_if_no_path || dm_noflush_suspending(m->ti)); + assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path); spin_unlock_irqrestore(&m->lock, flags); if (!queue_if_no_path) { @@ -1486,7 +1517,7 @@ static int multipath_end_io(struct dm_target *ti, struct request *clone, fail_path(pgpath); if (atomic_read(&m->nr_valid_paths) == 0 && - !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { + !must_push_back_rq(m)) { if (error == BLK_STS_IOERR) dm_report_EIO(m); /* complete with the original error */ @@ -1521,8 +1552,12 @@ static int multipath_end_io_bio(struct dm_target *ti, struct bio *clone, if (atomic_read(&m->nr_valid_paths) == 0 && !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { - dm_report_EIO(m); - *error = BLK_STS_IOERR; + if (must_push_back_bio(m)) { + r = DM_ENDIO_REQUEUE; + } else { + dm_report_EIO(m); + *error = BLK_STS_IOERR; + } goto done; } -- cgit v1.2.3-71-gd317 From fbc7c07ec23c040179384a1f16b62b6030eb6bdd Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan Date: Wed, 6 Dec 2017 09:27:30 -0800 Subject: dm bufio: fix shrinker scans when (nr_to_scan < retain_target) When system is under memory pressure it is observed that dm bufio shrinker often reclaims only one buffer per scan. This change fixes the following two issues in dm bufio shrinker that cause this behavior: 1. ((nr_to_scan - freed) <= retain_target) condition is used to terminate slab scan process. This assumes that nr_to_scan is equal to the LRU size, which might not be correct because do_shrink_slab() in vmscan.c calculates nr_to_scan using multiple inputs. As a result when nr_to_scan is less than retain_target (64) the scan will terminate after the first iteration, effectively reclaiming one buffer per scan and making scans very inefficient. This hurts vmscan performance especially because mutex is acquired/released every time dm_bufio_shrink_scan() is called. New implementation uses ((LRU size - freed) <= retain_target) condition for scan termination. LRU size can be safely determined inside __scan() because this function is called after dm_bufio_lock(). 2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to determine number of freeable objects in the slab. However dm_bufio always retains retain_target buffers in its LRU and will terminate a scan when this mark is reached. Therefore returning the entire LRU size from dm_bufio_shrink_count() is misleading because that does not represent the number of freeable objects that slab will reclaim during a scan. Returning (LRU size - retain_target) better represents the number of freeable objects in the slab. This way do_shrink_slab() returns 0 when (LRU size < retain_target) and vmscan will not try to scan this shrinker avoiding scans that will not reclaim any memory. Test: tested using Android device running /system/extras/alloc-stress that generates memory pressure and causes intensive shrinker scans Signed-off-by: Suren Baghdasaryan Signed-off-by: Mike Snitzer --- drivers/md/dm-bufio.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index b8ac591aaaa7..c546b567f3b5 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -1611,7 +1611,8 @@ static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan, int l; struct dm_buffer *b, *tmp; unsigned long freed = 0; - unsigned long count = nr_to_scan; + unsigned long count = c->n_buffers[LIST_CLEAN] + + c->n_buffers[LIST_DIRTY]; unsigned long retain_target = get_retain_buffers(c); for (l = 0; l < LIST_SIZE; l++) { @@ -1647,8 +1648,11 @@ static unsigned long dm_bufio_shrink_count(struct shrinker *shrink, struct shrink_control *sc) { struct dm_bufio_client *c = container_of(shrink, struct dm_bufio_client, shrinker); + unsigned long count = READ_ONCE(c->n_buffers[LIST_CLEAN]) + + READ_ONCE(c->n_buffers[LIST_DIRTY]); + unsigned long retain_target = get_retain_buffers(c); - return READ_ONCE(c->n_buffers[LIST_CLEAN]) + READ_ONCE(c->n_buffers[LIST_DIRTY]); + return (count < retain_target) ? 0 : (count - retain_target); } /* -- cgit v1.2.3-71-gd317 From bd3486ded7a0c313a6575343e6c2b21d14476645 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 5 Dec 2017 08:45:30 -0600 Subject: usb: musb: da8xx: fix babble condition handling When babble condition happens, the musb controller might automatically turns off VBUS. On DA8xx platform, the controller generates drvvbus interrupt for turning off VBUS along with the babble interrupt. In this case, we should handle the babble interrupt first and recover from the babble condition. This change ignores the drvvbus interrupt if babble interrupt is also generated at the same time, so the babble recovery routine works properly. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/da8xx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0397606a211b..6c036de63272 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -284,7 +284,15 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); - } else { + } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) { + /* + * When babble condition happens, drvvbus interrupt + * is also generated. Ignore this drvvbus interrupt + * and let babble interrupt handler recovers the + * controller; otherwise, the host-mode flag is lost + * due to the MUSB_DEV_MODE() call below and babble + * recovery logic will not be called. + */ musb->is_active = 0; MUSB_DEV_MODE(musb); otg->default_a = 0; -- cgit v1.2.3-71-gd317 From 62354454625741f0569c2cbe45b2d192f8fd258e Mon Sep 17 00:00:00 2001 From: David Kozub Date: Tue, 5 Dec 2017 22:40:04 +0100 Subject: USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by: David Kozub Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ drivers/usb/storage/unusual_uas.h | 7 +++++++ 2 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2968046e7c05..f72d045ee9ef 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2100,6 +2100,13 @@ UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0116, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA ), +/* Reported by David Kozub */ +UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, + "JMicron", + "JMS567", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA), + /* * Reported by Alexandre Oliva * JMicron responds to USN and several other SCSI ioctls with a diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index d520374a824e..e6127fb21c12 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -129,6 +129,13 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES), +/* Reported-by: David Kozub */ +UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, + "JMicron", + "JMS567", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BROKEN_FUA), + /* Reported-by: Hans de Goede */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", -- cgit v1.2.3-71-gd317 From 635f545a7e8be7596b9b2b6a43cab6bbd5a88e43 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:47 -0700 Subject: usbip: fix stub_rx: get_pipe() to validate endpoint number get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_rx.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 536e037f541f..4d61063c259d 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -328,15 +328,15 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) struct usb_host_endpoint *ep; struct usb_endpoint_descriptor *epd = NULL; + if (epnum < 0 || epnum > 15) + goto err_ret; + if (dir == USBIP_DIR_IN) ep = udev->ep_in[epnum & 0x7f]; else ep = udev->ep_out[epnum & 0x7f]; - if (!ep) { - dev_err(&sdev->udev->dev, "no such endpoint?, %d\n", - epnum); - BUG(); - } + if (!ep) + goto err_ret; epd = &ep->desc; if (usb_endpoint_xfer_control(epd)) { @@ -367,9 +367,10 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) return usb_rcvisocpipe(udev, epnum); } +err_ret: /* NOT REACHED */ - dev_err(&sdev->udev->dev, "get pipe, epnum %d\n", epnum); - return 0; + dev_err(&sdev->udev->dev, "get pipe() invalid epnum %d\n", epnum); + return -1; } static void masking_bogus_flags(struct urb *urb) @@ -435,6 +436,9 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, struct usb_device *udev = sdev->udev; int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); + if (pipe == -1) + return; + priv = stub_priv_alloc(sdev, pdu); if (!priv) return; -- cgit v1.2.3-71-gd317 From c6688ef9f29762e65bce325ef4acd6c675806366 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:48 -0700 Subject: usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_rx.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 4d61063c259d..493ac2928391 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -322,11 +322,13 @@ static struct stub_priv *stub_priv_alloc(struct stub_device *sdev, return priv; } -static int get_pipe(struct stub_device *sdev, int epnum, int dir) +static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu) { struct usb_device *udev = sdev->udev; struct usb_host_endpoint *ep; struct usb_endpoint_descriptor *epd = NULL; + int epnum = pdu->base.ep; + int dir = pdu->base.direction; if (epnum < 0 || epnum > 15) goto err_ret; @@ -339,6 +341,15 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) goto err_ret; epd = &ep->desc; + + /* validate transfer_buffer_length */ + if (pdu->u.cmd_submit.transfer_buffer_length > INT_MAX) { + dev_err(&sdev->udev->dev, + "CMD_SUBMIT: -EMSGSIZE transfer_buffer_length %d\n", + pdu->u.cmd_submit.transfer_buffer_length); + return -1; + } + if (usb_endpoint_xfer_control(epd)) { if (dir == USBIP_DIR_OUT) return usb_sndctrlpipe(udev, epnum); @@ -361,6 +372,21 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) } if (usb_endpoint_xfer_isoc(epd)) { + /* validate packet size and number of packets */ + unsigned int maxp, packets, bytes; + + maxp = usb_endpoint_maxp(epd); + maxp *= usb_endpoint_maxp_mult(epd); + bytes = pdu->u.cmd_submit.transfer_buffer_length; + packets = DIV_ROUND_UP(bytes, maxp); + + if (pdu->u.cmd_submit.number_of_packets < 0 || + pdu->u.cmd_submit.number_of_packets > packets) { + dev_err(&sdev->udev->dev, + "CMD_SUBMIT: isoc invalid num packets %d\n", + pdu->u.cmd_submit.number_of_packets); + return -1; + } if (dir == USBIP_DIR_OUT) return usb_sndisocpipe(udev, epnum); else @@ -369,7 +395,7 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) err_ret: /* NOT REACHED */ - dev_err(&sdev->udev->dev, "get pipe() invalid epnum %d\n", epnum); + dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum); return -1; } @@ -434,7 +460,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, struct stub_priv *priv; struct usbip_device *ud = &sdev->ud; struct usb_device *udev = sdev->udev; - int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); + int pipe = get_pipe(sdev, pdu); if (pipe == -1) return; @@ -456,7 +482,8 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, } /* allocate urb transfer buffer, if needed */ - if (pdu->u.cmd_submit.transfer_buffer_length > 0) { + if (pdu->u.cmd_submit.transfer_buffer_length > 0 && + pdu->u.cmd_submit.transfer_buffer_length <= INT_MAX) { priv->urb->transfer_buffer = kzalloc(pdu->u.cmd_submit.transfer_buffer_length, GFP_KERNEL); -- cgit v1.2.3-71-gd317 From 2f2d0088eb93db5c649d2a5e34a3800a8a935fc5 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:49 -0700 Subject: usbip: prevent vhci_hcd driver from leaking a socket pointer address When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/usbip_common.h | 1 + drivers/usb/usbip/vhci_sysfs.c | 25 ++++++++++++++++--------- tools/usb/usbip/libsrc/vhci_driver.c | 8 ++++---- 3 files changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h index e5de35c8c505..473fb8a87289 100644 --- a/drivers/usb/usbip/usbip_common.h +++ b/drivers/usb/usbip/usbip_common.h @@ -256,6 +256,7 @@ struct usbip_device { /* lock for status */ spinlock_t lock; + int sockfd; struct socket *tcp_socket; struct task_struct *tcp_rx; diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index e78f7472cac4..091f76b7196d 100644 --- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -17,15 +17,20 @@ /* * output example: - * hub port sta spd dev socket local_busid - * hs 0000 004 000 00000000 c5a7bb80 1-2.3 + * hub port sta spd dev sockfd local_busid + * hs 0000 004 000 00000000 3 1-2.3 * ................................................ - * ss 0008 004 000 00000000 d8cee980 2-3.4 + * ss 0008 004 000 00000000 4 2-3.4 * ................................................ * - * IP address can be retrieved from a socket pointer address by looking - * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a - * port number and its peer IP address. + * Output includes socket fd instead of socket pointer address to avoid + * leaking kernel memory address in: + * /sys/devices/platform/vhci_hcd.0/status and in debug output. + * The socket pointer address is not used at the moment and it was made + * visible as a convenient way to find IP address from socket pointer + * address by looking up /proc/net/{tcp,tcp6}. As this opens a security + * hole, the change is made to use sockfd instead. + * */ static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vdev) { @@ -39,8 +44,8 @@ static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vd if (vdev->ud.status == VDEV_ST_USED) { *out += sprintf(*out, "%03u %08x ", vdev->speed, vdev->devid); - *out += sprintf(*out, "%16p %s", - vdev->ud.tcp_socket, + *out += sprintf(*out, "%u %s", + vdev->ud.sockfd, dev_name(&vdev->udev->dev)); } else { @@ -160,7 +165,8 @@ static ssize_t nports_show(struct device *dev, struct device_attribute *attr, char *s = out; /* - * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, thus the * 2. + * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, + * thus the * 2. */ out += sprintf(out, "%d\n", VHCI_PORTS * vhci_num_controllers); return out - s; @@ -366,6 +372,7 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, vdev->devid = devid; vdev->speed = speed; + vdev->ud.sockfd = sockfd; vdev->ud.tcp_socket = socket; vdev->ud.status = VDEV_ST_NOTASSIGNED; diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c index 627d1dfc332b..c9c81614a66a 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.c +++ b/tools/usb/usbip/libsrc/vhci_driver.c @@ -50,14 +50,14 @@ static int parse_status(const char *value) while (*c != '\0') { int port, status, speed, devid; - unsigned long socket; + int sockfd; char lbusid[SYSFS_BUS_ID_SIZE]; struct usbip_imported_device *idev; char hub[3]; - ret = sscanf(c, "%2s %d %d %d %x %lx %31s\n", + ret = sscanf(c, "%2s %d %d %d %x %u %31s\n", hub, &port, &status, &speed, - &devid, &socket, lbusid); + &devid, &sockfd, lbusid); if (ret < 5) { dbg("sscanf failed: %d", ret); @@ -66,7 +66,7 @@ static int parse_status(const char *value) dbg("hub %s port %d status %d speed %d devid %x", hub, port, status, speed, devid); - dbg("socket %lx lbusid %s", socket, lbusid); + dbg("sockfd %u lbusid %s", sockfd, lbusid); /* if a device is connected, look at it */ idev = &vhci_driver->idev[port]; -- cgit v1.2.3-71-gd317 From be6123df1ea8f01ee2f896a16c2b7be3e4557a5a Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 7 Dec 2017 14:16:50 -0700 Subject: usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by: Secunia Research Cc: stable Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_tx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index b18bce96c212..53172b1f6257 100644 --- a/drivers/usb/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c @@ -167,6 +167,13 @@ static int stub_send_ret_submit(struct stub_device *sdev) memset(&pdu_header, 0, sizeof(pdu_header)); memset(&msg, 0, sizeof(msg)); + if (urb->actual_length > 0 && !urb->transfer_buffer) { + dev_err(&sdev->udev->dev, + "urb: actual_length %d transfer_buffer null\n", + urb->actual_length); + return -1; + } + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) iovnum = 2 + urb->number_of_packets; else -- cgit v1.2.3-71-gd317 From 5d9b70f7d52eb14bb37861c663bae44de9521c35 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 8 Dec 2017 18:10:05 +0200 Subject: xhci: Don't add a virt_dev to the devs array before it's fully allocated Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Cc: stable Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 15f7d422885f..3a29b32a3bd0 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -971,10 +971,9 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, return 0; } - xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags); - if (!xhci->devs[slot_id]) + dev = kzalloc(sizeof(*dev), flags); + if (!dev) return 0; - dev = xhci->devs[slot_id]; /* Allocate the (output) device context that will be used in the HC. */ dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags); @@ -1015,9 +1014,17 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, trace_xhci_alloc_virt_device(dev); + xhci->devs[slot_id] = dev; + return 1; fail: - xhci_free_virt_device(xhci, slot_id); + + if (dev->in_ctx) + xhci_free_container_ctx(xhci, dev->in_ctx); + if (dev->out_ctx) + xhci_free_container_ctx(xhci, dev->out_ctx); + kfree(dev); + return 0; } -- cgit v1.2.3-71-gd317 From 72b663a99c074a8d073e7ecdae446cfb024ef551 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 8 Dec 2017 18:10:06 +0200 Subject: usb: xhci: fix TDS for MTK xHCI1.1 For MTK's xHCI 1.0 or latter, TD size is the number of max packet sized packets remaining in the TD, not including this TRB (following spec). For MTK's xHCI 0.96 and older, TD size is the number of max packet sized packets remaining in the TD, including this TRB (not following spec). Cc: stable Signed-off-by: Chunfeng Yun Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6eb87c6e4d24..c5cbc685c691 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3112,7 +3112,7 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred, { u32 maxp, total_packet_count; - /* MTK xHCI is mostly 0.97 but contains some features from 1.0 */ + /* MTK xHCI 0.96 contains some features from 1.0 */ if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST)) return ((td_total_len - transferred) >> 10); @@ -3121,8 +3121,8 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred, trb_buff_len == td_total_len) return 0; - /* for MTK xHCI, TD size doesn't include this TRB */ - if (xhci->quirks & XHCI_MTK_HOST) + /* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */ + if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100)) trb_buff_len = 0; maxp = usb_endpoint_maxp(&urb->ep->desc); -- cgit v1.2.3-71-gd317 From babc8110057cb9ca542c3c1666cbda4e8ccf9250 Mon Sep 17 00:00:00 2001 From: Stefan Schake Date: Sat, 2 Dec 2017 18:40:39 +0100 Subject: drm/vc4: Release fence after signalling We were never releasing the initial fence reference that is obtained through dma_fence_init. Link: https://github.com/anholt/linux/issues/122 Fixes: cdec4d361323 ("drm/vc4: Expose dma-buf fences for V3D rendering.") Signed-off-by: Stefan Schake Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/1512236444-301-1-git-send-email-stschake@gmail.com --- drivers/gpu/drm/vc4/vc4_gem.c | 4 +++- drivers/gpu/drm/vc4/vc4_irq.c | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index 6c32c89a83a9..638540943c61 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -888,8 +888,10 @@ vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec) /* If we got force-completed because of GPU reset rather than * through our IRQ handler, signal the fence now. */ - if (exec->fence) + if (exec->fence) { dma_fence_signal(exec->fence); + dma_fence_put(exec->fence); + } if (exec->bo) { for (i = 0; i < exec->bo_count; i++) { diff --git a/drivers/gpu/drm/vc4/vc4_irq.c b/drivers/gpu/drm/vc4/vc4_irq.c index 61b2e5377993..26eddbb62893 100644 --- a/drivers/gpu/drm/vc4/vc4_irq.c +++ b/drivers/gpu/drm/vc4/vc4_irq.c @@ -139,6 +139,7 @@ vc4_irq_finish_render_job(struct drm_device *dev) list_move_tail(&exec->head, &vc4->job_done_list); if (exec->fence) { dma_fence_signal_locked(exec->fence); + dma_fence_put(exec->fence); exec->fence = NULL; } vc4_submit_next_render_job(dev); -- cgit v1.2.3-71-gd317 From 6f6a23a213be51728502b88741ba6a10cda2441d Mon Sep 17 00:00:00 2001 From: Adam Wallis Date: Mon, 27 Nov 2017 10:45:01 -0500 Subject: dmaengine: dmatest: move callback wait queue to thread context Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Commit a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times out") attempted to WARN the user that the stack was likely corrupted but did not fix the actual issue. This patch fixes the issue by pushing the wait queue and callback structs into the the thread structure. If a failure occurs due to time, dmaengine_terminate_all will force the callback to safely call wake_up_all() without possibility of using a freed pointer. Cc: stable@vger.kernel.org Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Fixes: adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") Reviewed-by: Sinan Kaya Suggested-by: Shunyong Yang Signed-off-by: Adam Wallis Signed-off-by: Vinod Koul --- drivers/dma/dmatest.c | 55 +++++++++++++++++++++++++++++---------------------- 1 file changed, 31 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 47edc7fbf91f..ec5f9d2bc820 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -155,6 +155,12 @@ MODULE_PARM_DESC(run, "Run the test (default: false)"); #define PATTERN_COUNT_MASK 0x1f #define PATTERN_MEMSET_IDX 0x01 +/* poor man's completion - we want to use wait_event_freezable() on it */ +struct dmatest_done { + bool done; + wait_queue_head_t *wait; +}; + struct dmatest_thread { struct list_head node; struct dmatest_info *info; @@ -165,6 +171,8 @@ struct dmatest_thread { u8 **dsts; u8 **udsts; enum dma_transaction_type type; + wait_queue_head_t done_wait; + struct dmatest_done test_done; bool done; }; @@ -342,18 +350,25 @@ static unsigned int dmatest_verify(u8 **bufs, unsigned int start, return error_count; } -/* poor man's completion - we want to use wait_event_freezable() on it */ -struct dmatest_done { - bool done; - wait_queue_head_t *wait; -}; static void dmatest_callback(void *arg) { struct dmatest_done *done = arg; - - done->done = true; - wake_up_all(done->wait); + struct dmatest_thread *thread = + container_of(arg, struct dmatest_thread, done_wait); + if (!thread->done) { + done->done = true; + wake_up_all(done->wait); + } else { + /* + * If thread->done, it means that this callback occurred + * after the parent thread has cleaned up. This can + * happen in the case that driver doesn't implement + * the terminate_all() functionality and a dma operation + * did not occur within the timeout period + */ + WARN(1, "dmatest: Kernel memory may be corrupted!!\n"); + } } static unsigned int min_odd(unsigned int x, unsigned int y) @@ -424,9 +439,8 @@ static unsigned long long dmatest_KBs(s64 runtime, unsigned long long len) */ static int dmatest_func(void *data) { - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_wait); struct dmatest_thread *thread = data; - struct dmatest_done done = { .wait = &done_wait }; + struct dmatest_done *done = &thread->test_done; struct dmatest_info *info; struct dmatest_params *params; struct dma_chan *chan; @@ -673,9 +687,9 @@ static int dmatest_func(void *data) continue; } - done.done = false; + done->done = false; tx->callback = dmatest_callback; - tx->callback_param = &done; + tx->callback_param = done; cookie = tx->tx_submit(tx); if (dma_submit_error(cookie)) { @@ -688,21 +702,12 @@ static int dmatest_func(void *data) } dma_async_issue_pending(chan); - wait_event_freezable_timeout(done_wait, done.done, + wait_event_freezable_timeout(thread->done_wait, done->done, msecs_to_jiffies(params->timeout)); status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); - if (!done.done) { - /* - * We're leaving the timed out dma operation with - * dangling pointer to done_wait. To make this - * correct, we'll need to allocate wait_done for - * each test iteration and perform "who's gonna - * free it this time?" dancing. For now, just - * leave it dangling. - */ - WARN(1, "dmatest: Kernel stack may be corrupted!!\n"); + if (!done->done) { dmaengine_unmap_put(um); result("test timed out", total_tests, src_off, dst_off, len, 0); @@ -789,7 +794,7 @@ err_thread_type: dmatest_KBs(runtime, total_len), ret); /* terminate all transfers on specified channels */ - if (ret) + if (ret || failed_tests) dmaengine_terminate_all(chan); thread->done = true; @@ -849,6 +854,8 @@ static int dmatest_add_threads(struct dmatest_info *info, thread->info = info; thread->chan = dtc->chan; thread->type = type; + thread->test_done.wait = &thread->done_wait; + init_waitqueue_head(&thread->done_wait); smp_wmb(); thread->task = kthread_create(dmatest_func, thread, "%s-%s%u", dma_chan_name(chan), op, i); -- cgit v1.2.3-71-gd317 From eb9436966fdc84cebdf222952a99898ab46d9bb0 Mon Sep 17 00:00:00 2001 From: Tobias Jordan Date: Wed, 6 Dec 2017 14:28:27 +0100 Subject: dmaengine: jz4740: disable/unprepare clk if probe fails in error path of jz4740_dma_probe(), call clk_disable_unprepare() to clean up. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 25ce6c35fea0 MIPS: jz4740: Remove custom DMA API Signed-off-by: Tobias Jordan Signed-off-by: Vinod Koul --- drivers/dma/dma-jz4740.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c index d50273fed715..afd5e10f8927 100644 --- a/drivers/dma/dma-jz4740.c +++ b/drivers/dma/dma-jz4740.c @@ -555,7 +555,7 @@ static int jz4740_dma_probe(struct platform_device *pdev) ret = dma_async_device_register(dd); if (ret) - return ret; + goto err_clk; irq = platform_get_irq(pdev, 0); ret = request_irq(irq, jz4740_dma_irq, 0, dev_name(&pdev->dev), dmadev); @@ -568,6 +568,8 @@ static int jz4740_dma_probe(struct platform_device *pdev) err_unregister: dma_async_device_unregister(dd); +err_clk: + clk_disable_unprepare(dmadev->clk); return ret; } -- cgit v1.2.3-71-gd317 From f5f00e7dcc4161f07b76ff1a854e8b1ea7a1ed41 Mon Sep 17 00:00:00 2001 From: Xiaolin Zhang Date: Tue, 5 Dec 2017 14:45:32 +0800 Subject: drm/i915/gvt: Fix pipe A enable as default for vgpu observed igt drv_module_reload test case failure on 4.15.0 rc2 kernel with panic due to no active pipe available. the gpu will reset during unload/load and make pipe config reg lost which can cause kernel panic issue happen. this patch is to move pipe enabling to emulate_mointor_status_chagne to handle vgpu reset case as well. Fixes: 7e6059020894 ("drm/i915/gvt: enabled pipe A default on creating vgpu") Signed-off-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/display.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/display.c b/drivers/gpu/drm/i915/gvt/display.c index 355120865efd..309f3fa6794a 100644 --- a/drivers/gpu/drm/i915/gvt/display.c +++ b/drivers/gpu/drm/i915/gvt/display.c @@ -266,6 +266,8 @@ static void emulate_monitor_status_change(struct intel_vgpu *vgpu) /* Clear host CRT status, so guest couldn't detect this host CRT. */ if (IS_BROADWELL(dev_priv)) vgpu_vreg(vgpu, PCH_ADPA) &= ~ADPA_CRT_HOTPLUG_MONITOR_MASK; + + vgpu_vreg(vgpu, PIPECONF(PIPE_A)) |= PIPECONF_ENABLE; } static void clean_virtual_dp_monitor(struct intel_vgpu *vgpu, int port_num) @@ -282,7 +284,6 @@ static void clean_virtual_dp_monitor(struct intel_vgpu *vgpu, int port_num) static int setup_virtual_dp_monitor(struct intel_vgpu *vgpu, int port_num, int type, unsigned int resolution) { - struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; struct intel_vgpu_port *port = intel_vgpu_port(vgpu, port_num); if (WARN_ON(resolution >= GVT_EDID_NUM)) @@ -308,7 +309,7 @@ static int setup_virtual_dp_monitor(struct intel_vgpu *vgpu, int port_num, port->type = type; emulate_monitor_status_change(vgpu); - vgpu_vreg(vgpu, PIPECONF(PIPE_A)) |= PIPECONF_ENABLE; + return 0; } -- cgit v1.2.3-71-gd317 From 8722e095f5a44d0e409e45c5ddc2ee9cf589c777 Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Thu, 30 Nov 2017 15:31:06 +0000 Subject: usb: dwc3: gadget: Wait longer for controller to end command processing DWC3_DEPCMD_ENDTRANSFER has been witnessed to require around 600 iterations before controller would become idle again after unplugging the USB cable with AIO reads submitted. Bump timeout from 500 iterations to 1000 so dwc3_stop_active_transfer does not receive -ETIMEDOUT and does not WARN: [ 81.326273] ------------[ cut here ]------------ [ 81.335341] WARNING: CPU: 0 PID: 1874 at drivers/usb/dwc3/gadget.c:2627 dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3] [ 81.347094] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil dwc3 intel_powerclamp coretemp ulpi kvm_intel udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd basincove_gpadc industrialio gpio_keys usbcore usb_common [ 81.378142] CPU: 0 PID: 1874 Comm: irq/34-dwc3 Not tainted 4.14.0-edison+ #119 [ 81.385545] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 81.394548] task: f5b1be00 task.stack: f420a000 [ 81.399219] EIP: dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3] [ 81.406086] EFLAGS: 00010086 CPU: 0 [ 81.409672] EAX: 0000001f EBX: f5729800 ECX: c132a2a2 EDX: 00000000 [ 81.416096] ESI: f4054014 EDI: f41cf400 EBP: f420be10 ESP: f420bdf4 [ 81.422521] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 81.428061] CR0: 80050033 CR2: b7a3f000 CR3: 01d94000 CR4: 001006d0 [ 81.434483] Call Trace: [ 81.437063] __dwc3_gadget_ep_disable+0xa3/0x2b0 [dwc3] [ 81.442438] ? _raw_spin_lock_irqsave+0x32/0x40 [ 81.447135] dwc3_gadget_ep_disable+0xbf/0xe0 [dwc3] [ 81.452269] usb_ep_disable+0x1c/0xd0 [udc_core] [ 81.457048] ffs_func_eps_disable.isra.15+0x3b/0x90 [usb_f_fs] [ 81.463070] ffs_func_set_alt+0x7d/0x310 [usb_f_fs] [ 81.468132] ffs_func_disable+0x14/0x20 [usb_f_fs] [ 81.473075] reset_config+0x5b/0x90 [libcomposite] [ 81.478023] composite_disconnect+0x2b/0x50 [libcomposite] [ 81.483685] dwc3_disconnect_gadget+0x39/0x50 [dwc3] [ 81.488808] dwc3_gadget_disconnect_interrupt+0x21b/0x250 [dwc3] [ 81.495014] dwc3_thread_interrupt+0x2a8/0xf70 [dwc3] [ 81.500219] ? __schedule+0x78c/0x7e0 [ 81.504027] irq_thread_fn+0x18/0x30 [ 81.507715] ? irq_thread+0xb7/0x180 [ 81.511400] irq_thread+0x111/0x180 [ 81.515000] ? irq_finalize_oneshot+0xe0/0xe0 [ 81.519490] ? wake_threads_waitq+0x30/0x30 [ 81.523806] kthread+0x107/0x110 [ 81.527131] ? disable_percpu_irq+0x50/0x50 [ 81.531439] ? kthread_stop+0x150/0x150 [ 81.535397] ret_from_fork+0x19/0x24 [ 81.539136] Code: 89 d8 c7 45 ec 00 00 00 00 c7 45 f0 00 00 00 00 c7 45 f4 00 00 00 00 e8 56 ef ff ff 85 c0 74 12 50 68 b9 1c 14 f8 e8 64 0f f7 c8 <0f> ff 58 5a 8d 76 00 8b 83 98 00 00 00 c6 83 a0 00 00 00 00 83 [ 81.559295] ---[ end trace f3133eec81a473b8 ]--- Number of iterations measured on 4 consecutive unplugs: [ 1088.799777] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 605 times [ 1222.024986] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 580 times [ 1317.590452] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 598 times [ 1453.218314] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 594 times Signed-off-by: Vincent Pelletier Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 981fd986cf82..01e595bb1ff1 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -259,7 +259,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; - u32 timeout = 500; + u32 timeout = 1000; u32 reg; int cmd_status = 0; -- cgit v1.2.3-71-gd317 From ded600ea9fb51a495d2fcd21e90351df876488e8 Mon Sep 17 00:00:00 2001 From: Andreas Platschek Date: Thu, 7 Dec 2017 11:32:20 +0100 Subject: usb: dwc3: of-simple: fix missing clk_disable_unprepare If of_clk_get() fails, the clean-up of already initialized clocks should be the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare() for each clock should be called before the clk_put(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization") Signed-off-by: Andreas Platschek Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index c4a4d7bd2766..762370dd7c75 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -51,8 +51,10 @@ static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) clk = of_clk_get(np, i); if (IS_ERR(clk)) { - while (--i >= 0) + while (--i >= 0) { + clk_disable_unprepare(simple->clks[i]); clk_put(simple->clks[i]); + } return PTR_ERR(clk); } -- cgit v1.2.3-71-gd317 From a0d8c4cfdf31a9576f683628e50b76714c785ef1 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 7 Dec 2017 13:40:24 +0900 Subject: usb: dwc3: of-simple: set dev_pm_ops dwc3_of_simple_dev_pm_ops has never been used since the initial support by commit 16adc674d0d6 ("usb: dwc3: add generic OF glue layer"). I guess it just missed to set .pm struct member. Signed-off-by: Masahiro Yamada Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 762370dd7c75..7ae0eefc7cc7 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -205,6 +205,7 @@ static struct platform_driver dwc3_of_simple_driver = { .driver = { .name = "dwc3-of-simple", .of_match_table = of_dwc3_simple_match, + .pm = &dwc3_of_simple_dev_pm_ops, }, }; -- cgit v1.2.3-71-gd317 From ec5bb87e4e2a1d3a35563a7bcfac9febf67aba9d Mon Sep 17 00:00:00 2001 From: Manu Gautam Date: Wed, 6 Dec 2017 12:49:04 +0530 Subject: usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3 For isochronous endpoints with ep->mult less than 3, PCM1 value of trb->size in set incorrectly. For ep->mult = 2, this is set to 0/-1 and for ep->mult = 1, this is set to -2. This is because the initial mult is set to ep->mult - 1 instead of 2. Signed-off-by: Manu Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 01e595bb1ff1..639dd1b163a0 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -912,7 +912,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, */ if (speed == USB_SPEED_HIGH) { struct usb_ep *ep = &dep->endpoint; - unsigned int mult = ep->mult - 1; + unsigned int mult = 2; unsigned int maxp = usb_endpoint_maxp(ep->desc); if (length <= (2 * maxp)) -- cgit v1.2.3-71-gd317 From 9273083a1530891360e9fe4fad26ae96810db499 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Thu, 30 Nov 2017 12:16:37 +0400 Subject: usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues In host mode reading from DPTXSIZn returning invalid value in dwc2_check_param_tx_fifo_sizes function. In total TxFIFO size calculations unnecessarily reducing by ep_info. hw->total_fifo_size can be fully allocated for FIFO's. Added num_dev_in_eps member in dwc2_hw_params structure to save number of IN EPs. Added g_tx_fifo_size array in dwc2_hw_params structure to store power on reset values of DPTXSIZn registers in forced device mode. Updated dwc2_hsotg_tx_fifo_count() function to get TxFIFO count from num_dev_in_eps. Updated dwc2_get_dev_hwparams() function to store DPTXFSIZn in g_tx_fifo_size array. dwc2_get_host/dev_hwparams() functions call moved after num_dev_in_eps set from hwcfg4. Modified dwc2_check_param_tx_fifo_sizes() function to check TxFIFOn sizes based on g_tx_fifo_size array. Removed ep_info subtraction during calculation of tx_addr_max in dwc2_hsotg_tx_fifo_total_depth() function. Also removed dwc2_hsotg_ep_info_size() function as no more need. Acked-by: John Youn Signed-off-by: Gevorg Sahakyan Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 4 ++++ drivers/usb/dwc2/gadget.c | 42 ++---------------------------------------- drivers/usb/dwc2/params.c | 29 +++++++++++++++++++---------- 3 files changed, 25 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index f66c94130cac..31749c79045f 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -537,6 +537,7 @@ struct dwc2_core_params { * 2 - Internal DMA * @power_optimized Are power optimizations enabled? * @num_dev_ep Number of device endpoints available + * @num_dev_in_eps Number of device IN endpoints available * @num_dev_perio_in_ep Number of device periodic IN endpoints * available * @dev_token_q_depth Device Mode IN Token Sequence Learning Queue @@ -565,6 +566,7 @@ struct dwc2_core_params { * 2 - 8 or 16 bits * @snpsid: Value from SNPSID register * @dev_ep_dirs: Direction of device endpoints (GHWCFG1) + * @g_tx_fifo_size[] Power-on values of TxFIFO sizes */ struct dwc2_hw_params { unsigned op_mode:3; @@ -586,12 +588,14 @@ struct dwc2_hw_params { unsigned fs_phy_type:2; unsigned i2c_enable:1; unsigned num_dev_ep:4; + unsigned num_dev_in_eps : 4; unsigned num_dev_perio_in_ep:4; unsigned total_fifo_size:16; unsigned power_optimized:1; unsigned utmi_phy_data_width:2; u32 snpsid; u32 dev_ep_dirs; + u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; }; /* Size of control and EP0 buffers */ diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 88529d092503..e4c3ce0de5de 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -195,55 +195,18 @@ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) { if (hsotg->hw_params.en_multiple_tx_fifo) /* In dedicated FIFO mode we need count of IN EPs */ - return (dwc2_readl(hsotg->regs + GHWCFG4) & - GHWCFG4_NUM_IN_EPS_MASK) >> GHWCFG4_NUM_IN_EPS_SHIFT; + return hsotg->hw_params.num_dev_in_eps; else /* In shared FIFO mode we need count of Periodic IN EPs */ return hsotg->hw_params.num_dev_perio_in_ep; } -/** - * dwc2_hsotg_ep_info_size - return Endpoint Info Control block size in DWORDs - */ -static int dwc2_hsotg_ep_info_size(struct dwc2_hsotg *hsotg) -{ - int val = 0; - int i; - u32 ep_dirs; - - /* - * Don't need additional space for ep info control registers in - * slave mode. - */ - if (!using_dma(hsotg)) { - dev_dbg(hsotg->dev, "Buffer DMA ep info size 0\n"); - return 0; - } - - /* - * Buffer DMA mode - 1 location per endpoit - * Descriptor DMA mode - 4 locations per endpoint - */ - ep_dirs = hsotg->hw_params.dev_ep_dirs; - - for (i = 0; i <= hsotg->hw_params.num_dev_ep; i++) { - val += ep_dirs & 3 ? 1 : 2; - ep_dirs >>= 2; - } - - if (using_desc_dma(hsotg)) - val = val * 4; - - return val; -} - /** * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for * device mode TX FIFOs */ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) { - int ep_info_size; int addr; int tx_addr_max; u32 np_tx_fifo_size; @@ -252,8 +215,7 @@ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) hsotg->params.g_np_tx_fifo_size); /* Get Endpoint Info Control block size in DWORDs. */ - ep_info_size = dwc2_hsotg_ep_info_size(hsotg); - tx_addr_max = hsotg->hw_params.total_fifo_size - ep_info_size; + tx_addr_max = hsotg->hw_params.total_fifo_size; addr = hsotg->params.g_rx_fifo_size + np_tx_fifo_size; if (tx_addr_max <= addr) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index ef73af6e03a9..03fd20f0b496 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -484,8 +484,7 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) } for (fifo = 1; fifo <= fifo_count; fifo++) { - dptxfszn = (dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)) & - FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; + dptxfszn = hsotg->hw_params.g_tx_fifo_size[fifo]; if (hsotg->params.g_tx_fifo_size[fifo] < min || hsotg->params.g_tx_fifo_size[fifo] > dptxfszn) { @@ -609,6 +608,7 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) struct dwc2_hw_params *hw = &hsotg->hw_params; bool forced; u32 gnptxfsiz; + int fifo, fifo_count; if (hsotg->dr_mode == USB_DR_MODE_HOST) return; @@ -617,6 +617,14 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); + fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + + for (fifo = 1; fifo <= fifo_count; fifo++) { + hw->g_tx_fifo_size[fifo] = + (dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)) & + FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; + } + if (forced) dwc2_clear_force_mode(hsotg); @@ -661,14 +669,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); - /* - * Host specific hardware parameters. Reading these parameters - * requires the controller to be in host mode. The mode will - * be forced, if necessary, to read these values. - */ - dwc2_get_host_hwparams(hsotg); - dwc2_get_dev_hwparams(hsotg); - /* hwcfg1 */ hw->dev_ep_dirs = hwcfg1; @@ -711,6 +711,8 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN); hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >> GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT; + hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >> + GHWCFG4_NUM_IN_EPS_SHIFT; hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA); hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ); hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> @@ -719,6 +721,13 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) /* fifo sizes */ hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> GRXFSIZ_DEPTH_SHIFT; + /* + * Host specific hardware parameters. Reading these parameters + * requires the controller to be in host mode. The mode will + * be forced, if necessary, to read these values. + */ + dwc2_get_host_hwparams(hsotg); + dwc2_get_dev_hwparams(hsotg); return 0; } -- cgit v1.2.3-71-gd317 From 91516a2a4734614d62ee3ed921f8f88acc67c000 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Sat, 9 Dec 2017 23:47:55 +0100 Subject: mmc: core: apply NO_CMD23 quirk to some specific cards To get an usdhc Apacer and some ATP SD cards work reliable, CMD23 needs to be disabled. This has been tested on i.MX6 (sdhci-esdhc) and rk3288 (dw_mmc-rockchip). Without this patch on i.MX6 (sdhci-esdhc): $ dd if=/dev/urandom of=/mnt/test bs=1M count=10 conv=fsync | | mmc0: starting CMD25 arg 00a71f00 flags 000000b5 | mmc0: blksz 512 blocks 1024 flags 00000100 tsac 3000 ms nsac 0 | mmc0: CMD12 arg 00000000 flags 0000049d | sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001 | mmc0: Timeout waiting for hardware interrupt. Without this patch on rk3288 (dw_mmc-rockchip): | mmc1: Card stuck in programming state! mmcblk1 card_busy_detect | dwmmc_rockchip ff0c0000.dwmmc: Busy; trying anyway | mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, | actual 400000HZ div = 0) | mmc1: card never left busy state | mmc1: tried to reset card, got error -110 | blk_update_request: I/O error, dev mmcblk1, sector 139778 | Buffer I/O error on dev mmcblk1p1, logical block 131586, lost async | page write Signed-off-by: Christoph Fritz Cc: # v4.14+ Signed-off-by: Ulf Hansson --- drivers/mmc/core/card.h | 2 ++ drivers/mmc/core/quirks.h | 8 ++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h index f06cd91964ce..79a5b985ccf5 100644 --- a/drivers/mmc/core/card.h +++ b/drivers/mmc/core/card.h @@ -75,9 +75,11 @@ struct mmc_fixup { #define EXT_CSD_REV_ANY (-1u) #define CID_MANFID_SANDISK 0x2 +#define CID_MANFID_ATP 0x9 #define CID_MANFID_TOSHIBA 0x11 #define CID_MANFID_MICRON 0x13 #define CID_MANFID_SAMSUNG 0x15 +#define CID_MANFID_APACER 0x27 #define CID_MANFID_KINGSTON 0x70 #define CID_MANFID_HYNIX 0x90 diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index f664e9cbc9f8..75d317623852 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -52,6 +52,14 @@ static const struct mmc_fixup mmc_blk_fixups[] = { MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, MMC_QUIRK_BLK_NO_CMD23), + /* + * Some SD cards lockup while using CMD23 multiblock transfers. + */ + MMC_FIXUP("AF SD", CID_MANFID_ATP, CID_OEMID_ANY, add_quirk_sd, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("APUSD", CID_MANFID_APACER, 0x5048, add_quirk_sd, + MMC_QUIRK_BLK_NO_CMD23), + /* * Some MMC cards need longer data read timeout than indicated in CSD. */ -- cgit v1.2.3-71-gd317 From 3487972d7fa6c5143951436ada5933dcf0ec659d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 7 Dec 2017 02:41:18 +0100 Subject: PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume() Middle-layer code doing suspend-time optimizations for devices with the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and the ACPI PM domain) needs to make the core skip ->thaw_early and ->thaw callbacks for those devices in some cases and it sets the power.direct_complete flag for them for this purpose. However, it turns out that setting power.direct_complete outside of the PM core is a bad idea as it triggers an excess invocation of pm_runtime_enable() in device_resume(). For this reason, provide a helper to clear power.is_late_suspended and power.is_suspended to be invoked by the middle-layer code in question instead of setting power.direct_complete and make that code call the new helper. Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account) Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Acked-by: Bjorn Helgaas --- drivers/acpi/device_pm.c | 2 +- drivers/base/power/main.c | 15 +++++++++++++++ drivers/pci/pci-driver.c | 2 +- include/linux/pm.h | 1 + 4 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index e4ffaeec9ec2..a4c8ad98560d 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -1138,7 +1138,7 @@ int acpi_subsys_thaw_noirq(struct device *dev) * skip all of the subsequent "thaw" callbacks for the device. */ if (dev_pm_smart_suspend_and_suspended(dev)) { - dev->power.direct_complete = true; + dev_pm_skip_next_resume_phases(dev); return 0; } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index db2f04415927..08744b572af6 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -525,6 +525,21 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd) /*------------------------- Resume routines -------------------------*/ +/** + * dev_pm_skip_next_resume_phases - Skip next system resume phases for device. + * @dev: Target device. + * + * Make the core skip the "early resume" and "resume" phases for @dev. + * + * This function can be called by middle-layer code during the "noirq" phase of + * system resume if necessary, but not by device drivers. + */ +void dev_pm_skip_next_resume_phases(struct device *dev) +{ + dev->power.is_late_suspended = false; + dev->power.is_suspended = false; +} + /** * device_resume_noirq - Execute a "noirq resume" callback for given device. * @dev: Device to handle. diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 7f47bb72bf30..945099d49f8f 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -999,7 +999,7 @@ static int pci_pm_thaw_noirq(struct device *dev) * the subsequent "thaw" callbacks for the device. */ if (dev_pm_smart_suspend_and_suspended(dev)) { - dev->power.direct_complete = true; + dev_pm_skip_next_resume_phases(dev); return 0; } diff --git a/include/linux/pm.h b/include/linux/pm.h index 65d39115f06d..492ed473ba7e 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -765,6 +765,7 @@ extern int pm_generic_poweroff_late(struct device *dev); extern int pm_generic_poweroff(struct device *dev); extern void pm_generic_complete(struct device *dev); +extern void dev_pm_skip_next_resume_phases(struct device *dev); extern bool dev_pm_smart_suspend_and_suspended(struct device *dev); #else /* !CONFIG_PM_SLEEP */ -- cgit v1.2.3-71-gd317 From 1ac8aa8d0568606485451ea860a6c6c3fad0d42d Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Thu, 30 Nov 2017 11:06:15 -0600 Subject: ipmi_si: Fix oops with PCI devices When the IPMI PCI code was split out, some code was consolidated for setting the io_setup field in the io structure. The PCI code needed this set before registration to probe register spacing, though, so restore the old code for that function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999 Signed-off-by: Corey Minyard Tested-by: Meelis Roos --- drivers/char/ipmi/ipmi_si_pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c index 99771f5cad07..27dd11c49d21 100644 --- a/drivers/char/ipmi/ipmi_si_pci.c +++ b/drivers/char/ipmi/ipmi_si_pci.c @@ -103,10 +103,13 @@ static int ipmi_pci_probe(struct pci_dev *pdev, io.addr_source_cleanup = ipmi_pci_cleanup; io.addr_source_data = pdev; - if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) + if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { io.addr_type = IPMI_IO_ADDR_SPACE; - else + io.io_setup = ipmi_si_port_setup; + } else { io.addr_type = IPMI_MEM_ADDR_SPACE; + io.io_setup = ipmi_si_mem_setup; + } io.addr_data = pci_resource_start(pdev, 0); io.regspacing = ipmi_pci_probe_regspacing(&io); -- cgit v1.2.3-71-gd317 From 51614b26a029515dd3bc43a8c0e16a9ee51bbf52 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 6 Dec 2017 04:25:44 -0500 Subject: ipmi_si: fix crash on parisc This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc. The pointer io.io_setup is not initialized and thus it causes crash in try_smi_init when attempting to call new_smi->io.io_setup. Signed-off-by: Mikulas Patocka Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_si_parisc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_si_parisc.c b/drivers/char/ipmi/ipmi_si_parisc.c index 090b073ab441..6b10f0e18a95 100644 --- a/drivers/char/ipmi/ipmi_si_parisc.c +++ b/drivers/char/ipmi/ipmi_si_parisc.c @@ -10,6 +10,8 @@ static int __init ipmi_parisc_probe(struct parisc_device *dev) { struct si_sm_io io; + memset(&io, 0, sizeof(io)); + io.si_type = SI_KCS; io.addr_source = SI_DEVICETREE; io.addr_type = IPMI_MEM_ADDR_SPACE; -- cgit v1.2.3-71-gd317 From f1e2400a80ff55eb7c5f4fd9d7eb163fd0de9a2c Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 8 Dec 2017 12:08:11 +0100 Subject: net: phy: meson-gxl: detect LPA corruption The purpose of this change is to fix the incorrect detection of the link partner (LP) advertised capabilities which sometimes happens with this PHY (roughly 1 time in a dozen) This issue may cause the link to be negotiated at 10Mbps/Full or 10Mbps/Half when 100MBps/Full is actually possible. In some case, the link is even completely broken and no communication is possible. To detect the corruption, we must look for a magic undocumented bit in the WOL bank (hint given by the SoC vendor kernel) but this is not enough to cover all cases. We also have to look at the LPA ack. If the LP supports Aneg but did not ack our base code when aneg is completed, we assume something went wrong. The detection of a corrupted LPA triggers a restart of the aneg process. This solves the problem but may take up to 6 retries to complete. Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Signed-off-by: Jerome Brunet Signed-off-by: David S. Miller --- drivers/net/phy/meson-gxl.c | 74 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 73 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 1ea69b7585d9..700007dd4be5 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -22,6 +22,7 @@ #include #include #include +#include static int meson_gxl_config_init(struct phy_device *phydev) { @@ -50,6 +51,77 @@ static int meson_gxl_config_init(struct phy_device *phydev) return 0; } +/* This function is provided to cope with the possible failures of this phy + * during aneg process. When aneg fails, the PHY reports that aneg is done + * but the value found in MII_LPA is wrong: + * - Early failures: MII_LPA is just 0x0001. if MII_EXPANSION reports that + * the link partner (LP) supports aneg but the LP never acked our base + * code word, it is likely that we never sent it to begin with. + * - Late failures: MII_LPA is filled with a value which seems to make sense + * but it actually is not what the LP is advertising. It seems that we + * can detect this using a magic bit in the WOL bank (reg 12 - bit 12). + * If this particular bit is not set when aneg is reported being done, + * it means MII_LPA is likely to be wrong. + * + * In both case, forcing a restart of the aneg process solve the problem. + * When this failure happens, the first retry is usually successful but, + * in some cases, it may take up to 6 retries to get a decent result + */ +int meson_gxl_read_status(struct phy_device *phydev) +{ + int ret, wol, lpa, exp; + + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = genphy_aneg_done(phydev); + if (ret < 0) + return ret; + else if (!ret) + goto read_status_continue; + + /* Need to access WOL bank, make sure the access is open */ + ret = phy_write(phydev, 0x14, 0x0000); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0400); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0000); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0400); + if (ret) + return ret; + + /* Request LPI_STATUS WOL register */ + ret = phy_write(phydev, 0x14, 0x8D80); + if (ret) + return ret; + + /* Read LPI_STATUS value */ + wol = phy_read(phydev, 0x15); + if (wol < 0) + return wol; + + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + exp = phy_read(phydev, MII_EXPANSION); + if (exp < 0) + return exp; + + if (!(wol & BIT(12)) || + ((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) { + /* Looks like aneg failed after all */ + phydev_dbg(phydev, "LPA corruption - aneg restart\n"); + return genphy_restart_aneg(phydev); + } + } + +read_status_continue: + return genphy_read_status(phydev); +} + static struct phy_driver meson_gxl_phy[] = { { .phy_id = 0x01814400, @@ -60,7 +132,7 @@ static struct phy_driver meson_gxl_phy[] = { .config_init = meson_gxl_config_init, .config_aneg = genphy_config_aneg, .aneg_done = genphy_aneg_done, - .read_status = genphy_read_status, + .read_status = meson_gxl_read_status, .suspend = genphy_suspend, .resume = genphy_resume, }, -- cgit v1.2.3-71-gd317 From 2aab6b40b03154a263463a5d992ddd7d122a016a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 8 Dec 2017 16:35:40 +0100 Subject: net: sh_eth: do not advertise Gigabit capabilities when not available Not all variants of the sh_eth hardware have Gigabit support. Unfortunately, the current driver doesn't tell the PHY about the limited MAC capabilities. Due to this, if you have a Gigabit capable PHY, the PHY will advertise its Gigabit capability and establish a link at 1Gbit/s, even though the MAC doesn't support it. In order to avoid this, we use the recently introduced phy_set_max_speed() to tell the PHY to not advertise speed higher than 100 MBit/s. Tested on a SH7786 platform, with a Gigabit PHY. Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index db72d13cebb9..75323000c364 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1892,6 +1892,16 @@ static int sh_eth_phy_init(struct net_device *ndev) return PTR_ERR(phydev); } + /* mask with MAC supported features */ + if (mdp->cd->register_type != SH_ETH_REG_GIGABIT) { + int err = phy_set_max_speed(phydev, SPEED_100); + if (err) { + netdev_err(ndev, "failed to limit PHY to 100 Mbit/s\n"); + phy_disconnect(phydev); + return err; + } + } + phy_attached_info(phydev); return 0; -- cgit v1.2.3-71-gd317 From c058ecf6e455fac7346d46197a02398ead90851f Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 27 Nov 2017 13:16:32 -0800 Subject: iw_cxgb4: only insert drain cqes if wq is flushed Only insert our special drain CQEs to support ib_drain_sq/rq() after the wq is flushed. Otherwise, existing but not yet polled CQEs can be returned out of order to the user application. This can happen when the QP has exited RTS but not yet flushed the QP, which can happen during a normal close (vs abortive close). In addition never count the drain CQEs when determining how many CQEs need to be synthesized during the flush operation. This latter issue should never happen if the QP is properly flushed before inserting the drain CQE, but I wanted to avoid corrupting the CQ state. So we handle it and log a warning once. Fixes: 4fe7c2962e11 ("iw_cxgb4: refactor sq/rq drain logic") Signed-off-by: Steve Wise Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/cq.c | 5 +++++ drivers/infiniband/hw/cxgb4/qp.c | 14 ++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index ea55e95cd2c5..b7bfc536e00f 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -395,6 +395,11 @@ next_cqe: static int cqe_completes_wr(struct t4_cqe *cqe, struct t4_wq *wq) { + if (CQE_OPCODE(cqe) == C4IW_DRAIN_OPCODE) { + WARN_ONCE(1, "Unexpected DRAIN CQE qp id %u!\n", wq->sq.qid); + return 0; + } + if (CQE_OPCODE(cqe) == FW_RI_TERMINATE) return 0; diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 355e288ec969..38bddd02a943 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -868,7 +868,12 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, qhp = to_c4iw_qp(ibqp); spin_lock_irqsave(&qhp->lock, flag); - if (t4_wq_in_error(&qhp->wq)) { + + /* + * If the qp has been flushed, then just insert a special + * drain cqe. + */ + if (qhp->wq.flushed) { spin_unlock_irqrestore(&qhp->lock, flag); complete_sq_drain_wr(qhp, wr); return err; @@ -1011,7 +1016,12 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, qhp = to_c4iw_qp(ibqp); spin_lock_irqsave(&qhp->lock, flag); - if (t4_wq_in_error(&qhp->wq)) { + + /* + * If the qp has been flushed, then just insert a special + * drain cqe. + */ + if (qhp->wq.flushed) { spin_unlock_irqrestore(&qhp->lock, flag); complete_rq_drain_wr(qhp, wr); return err; -- cgit v1.2.3-71-gd317 From 68a213d325c23d39f109f4c7c824b906a7d209de Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Thu, 2 Nov 2017 21:25:24 +0100 Subject: platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This machine reports number of keyboard backlight led levels, instead of value of the last led level index. Therefore max_brightness properly needs to be subtracted by 1 to match led max_brightness API. Signed-off-by: Pali Rohár Reported-by: Gabriel M. Elder Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913 Signed-off-by: Darren Hart (VMware) --- drivers/platform/x86/dell-laptop.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index bf897b1832b1..cd4725e7e0b5 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -37,6 +37,7 @@ struct quirk_entry { u8 touchpad_led; + u8 kbd_led_levels_off_1; int needs_kbd_timeouts; /* @@ -67,6 +68,10 @@ static struct quirk_entry quirk_dell_xps13_9333 = { .kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 }, }; +static struct quirk_entry quirk_dell_latitude_e6410 = { + .kbd_led_levels_off_1 = 1, +}; + static struct platform_driver platform_driver = { .driver = { .name = "dell-laptop", @@ -269,6 +274,15 @@ static const struct dmi_system_id dell_quirks[] __initconst = { }, .driver_data = &quirk_dell_xps13_9333, }, + { + .callback = dmi_matched, + .ident = "Dell Latitude E6410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6410"), + }, + .driver_data = &quirk_dell_latitude_e6410, + }, { } }; @@ -1149,6 +1163,9 @@ static int kbd_get_info(struct kbd_info *info) units = (buffer->output[2] >> 8) & 0xFF; info->levels = (buffer->output[2] >> 16) & 0xFF; + if (quirks && quirks->kbd_led_levels_off_1 && info->levels) + info->levels--; + if (units & BIT(0)) info->seconds = (buffer->output[3] >> 0) & 0xFF; if (units & BIT(1)) -- cgit v1.2.3-71-gd317 From bff5bf9db1c9453ffd0a78abed3e2d040c092fd9 Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Mon, 4 Dec 2017 10:26:17 +1000 Subject: platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changes Sending the switch state change twice within the same frame is invalid evdev protocol and only works if the client handles keys immediately as well. Processing events immediately is incorrect, it forces a fake order of events that does not exist on the device. Recent versions of libinput changed to only process the device state and SYN_REPORT time, so now the key event is lost. https://bugs.freedesktop.org/show_bug.cgi?id=104041 Signed-off-by: Peter Hutterer Signed-off-by: Darren Hart (VMware) --- drivers/platform/x86/asus-wireless.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/asus-wireless.c b/drivers/platform/x86/asus-wireless.c index f3796164329e..d4aeac3477f5 100644 --- a/drivers/platform/x86/asus-wireless.c +++ b/drivers/platform/x86/asus-wireless.c @@ -118,6 +118,7 @@ static void asus_wireless_notify(struct acpi_device *adev, u32 event) return; } input_report_key(data->idev, KEY_RFKILL, 1); + input_sync(data->idev); input_report_key(data->idev, KEY_RFKILL, 0); input_sync(data->idev); } -- cgit v1.2.3-71-gd317 From 532298b95075144bcccf56d792f3fb3fbef2d5d0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 11 Dec 2017 13:54:27 +0300 Subject: platform/x86: dell-wmi: check for kmalloc() errors This allocation won't fail in the current kernel because it's small but not checking for kmalloc() failures introduces static checker warnings so let's fix it. Signed-off-by: Dan Carpenter Reviewed-by: Mario Limonciello Signed-off-by: Darren Hart (VMware) --- drivers/platform/x86/dell-wmi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 39d2f4518483..fb25b20df316 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -639,6 +639,8 @@ static int dell_wmi_events_set_enabled(bool enable) int ret; buffer = kzalloc(sizeof(struct calling_interface_buffer), GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer->cmd_class = CLASS_INFO; buffer->cmd_select = SELECT_APP_REGISTRATION; buffer->input[0] = 0x10000; -- cgit v1.2.3-71-gd317 From 621f6401fdeefe96dfe9eab4b167c7c39f552bb0 Mon Sep 17 00:00:00 2001 From: Jason Yan Date: Mon, 11 Dec 2017 15:03:33 +0800 Subject: scsi: libsas: fix length error in sas_smp_handler() The return value of smp_execute_task_sg() is the untransferred residual, but bsg_job_done() requires the length of payload received. This makes SMP passthrough commands from userland by sg ioctl to libsas get a wrong response. The userland tools such as smp_utils failed because of these wrong responses: ~#smp_discover /dev/bsg/expander-2\:13 response too short, len=0 ~#smp_discover /dev/bsg/expander-2\:134 response too short, len=0 Fix this by passing the actual received length to bsg_job_done(). And if smp_execute_task_sg() returns 0, this means received length is exactly the buffer length. [mkp: typo] Fixes: 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough") Cc: # v4.14+ Signed-off-by: Jason Yan Reported-by: chenqilin Tested-by: chenqilin CC: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/libsas/sas_expander.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 174e5eff6155..c7f21661b3cd 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -2145,7 +2145,7 @@ void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, struct sas_rphy *rphy) { struct domain_device *dev; - unsigned int reslen = 0; + unsigned int rcvlen = 0; int ret = -EINVAL; /* no rphy means no smp target support (ie aic94xx host) */ @@ -2179,12 +2179,12 @@ void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, ret = smp_execute_task_sg(dev, job->request_payload.sg_list, job->reply_payload.sg_list); - if (ret > 0) { - /* positive number is the untransferred residual */ - reslen = ret; + if (ret >= 0) { + /* bsg_job_done() requires the length received */ + rcvlen = job->reply_payload.payload_len - ret; ret = 0; } out: - bsg_job_done(job, ret, reslen); + bsg_job_done(job, ret, rcvlen); } -- cgit v1.2.3-71-gd317 From 14e3062fb18532175af4d1c4073597999f7a2248 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 5 Dec 2017 16:57:51 -0800 Subject: scsi: core: Fix a scsi_show_rq() NULL pointer dereference Avoid that scsi_show_rq() triggers a NULL pointer dereference if called after sd_uninit_command(). Swap the NULL pointer assignment and the mempool_free() call in sd_uninit_command() to make it less likely that scsi_show_rq() triggers a use-after-free. Note: even with these changes scsi_show_rq() can trigger a use-after-free but that's a lesser evil than e.g. suppressing debug information for T10 PI Type 2 commands completely. This patch fixes the following oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: scsi_format_opcode_name+0x1a/0x1c0 CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516 Call Trace: __scsi_format_command+0x27/0xc0 scsi_show_rq+0x5c/0xc0 __blk_mq_debugfs_rq_show+0x116/0x130 blk_mq_debugfs_rq_show+0xe/0x10 seq_read+0xfe/0x3b0 full_proxy_read+0x54/0x90 __vfs_read+0x37/0x160 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa5 [mkp: added Type 2] Fixes: 0eebd005dd07 ("scsi: Implement blk_mq_ops.show_rq()") Reported-by: Ming Lei Signed-off-by: Bart Van Assche Cc: James E.J. Bottomley Cc: Martin K. Petersen Cc: Ming Lei Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debugfs.c | 6 ++++-- drivers/scsi/sd.c | 4 +++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_debugfs.c b/drivers/scsi/scsi_debugfs.c index 01f08c03f2c1..c3765d29fd3f 100644 --- a/drivers/scsi/scsi_debugfs.c +++ b/drivers/scsi/scsi_debugfs.c @@ -8,9 +8,11 @@ void scsi_show_rq(struct seq_file *m, struct request *rq) { struct scsi_cmnd *cmd = container_of(scsi_req(rq), typeof(*cmd), req); int msecs = jiffies_to_msecs(jiffies - cmd->jiffies_at_alloc); - char buf[80]; + const u8 *const cdb = READ_ONCE(cmd->cmnd); + char buf[80] = "(?)"; - __scsi_format_command(buf, sizeof(buf), cmd->cmnd, cmd->cmd_len); + if (cdb) + __scsi_format_command(buf, sizeof(buf), cdb, cmd->cmd_len); seq_printf(m, ", .cmd=%s, .retries=%d, allocated %d.%03d s ago", buf, cmd->retries, msecs / 1000, msecs % 1000); } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 24fe68522716..a028ab3322a9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1312,6 +1312,7 @@ static int sd_init_command(struct scsi_cmnd *cmd) static void sd_uninit_command(struct scsi_cmnd *SCpnt) { struct request *rq = SCpnt->request; + u8 *cmnd; if (SCpnt->flags & SCMD_ZONE_WRITE_LOCK) sd_zbc_write_unlock_zone(SCpnt); @@ -1320,9 +1321,10 @@ static void sd_uninit_command(struct scsi_cmnd *SCpnt) __free_page(rq->special_vec.bv_page); if (SCpnt->cmnd != scsi_req(rq)->cmd) { - mempool_free(SCpnt->cmnd, sd_cdb_pool); + cmnd = SCpnt->cmnd; SCpnt->cmnd = NULL; SCpnt->cmd_len = 0; + mempool_free(cmnd, sd_cdb_pool); } } -- cgit v1.2.3-71-gd317 From d2b3c353595a855794f8b9df5b5bdbe8deb0c413 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 4 Dec 2017 12:11:02 +0300 Subject: pinctrl: cherryview: Mask all interrupts on Intel_Strago based systems Guenter Roeck reported an interrupt storm on a prototype system which is based on Cyan Chromebook. The root cause turned out to be a incorrectly configured pin that triggers spurious interrupts. This will be fixed in coreboot but currently we need to prevent the interrupt storm from happening by masking all interrupts (but not GPEs) on those systems. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Fixes: bcb48cca23ec ("pinctrl: cherryview: Do not mask all interrupts in probe") Reported-and-tested-by: Guenter Roeck Reported-by: Dmitry Torokhov Signed-off-by: Mika Westerberg Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index bdedb6325c72..4471fd94e1fe 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1620,6 +1620,22 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq) clear_bit(i, chip->irq.valid_mask); } + /* + * The same set of machines in chv_no_valid_mask[] have incorrectly + * configured GPIOs that generate spurious interrupts so we use + * this same list to apply another quirk for them. + * + * See also https://bugzilla.kernel.org/show_bug.cgi?id=197953. + */ + if (!need_valid_mask) { + /* + * Mask all interrupts the community is able to generate + * but leave the ones that can only generate GPEs unmasked. + */ + chv_writel(GENMASK(31, pctrl->community->nirqs), + pctrl->regs + CHV_INTMASK); + } + /* Clear all interrupts */ chv_writel(0xffff, pctrl->regs + CHV_INTSTAT); -- cgit v1.2.3-71-gd317 From 54eed78c5c831ba696259f7fa69966d699a173b1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 11 Dec 2017 12:30:14 +0100 Subject: usb: gadget: webcam: fix V4L2 Kconfig dependency Configuring the USB_G_WEBCAM driver as built-in leads to a link error when CONFIG_VIDEO_V4L2 is a loadable module: drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_setup': f_uvc.c:(.text+0xfe): undefined reference to `v4l2_event_queue' drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_ep0_complete': f_uvc.c:(.text+0x188): undefined reference to `v4l2_event_queue' This changes the Kconfig dependency to disallow that configuration, and force it to be a module in that case as well. This is apparently a rather old bug, but very hard to trigger even in thousands of randconfig builds. Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 9570bbeced4f..487568f2c729 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -487,7 +487,7 @@ endif # or video class gadget drivers), or specific hardware, here. config USB_G_WEBCAM tristate "USB Webcam Gadget" - depends on VIDEO_DEV + depends on VIDEO_V4L2 select USB_LIBCOMPOSITE select VIDEOBUF2_VMALLOC select USB_F_UVC -- cgit v1.2.3-71-gd317 From 9dbe416b656bb015fc49fc17961000ffa418838a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 12 Dec 2017 12:44:40 +0200 Subject: Revert "usb: gadget: allow to enable legacy drivers without USB_ETH" This reverts commit 7a9618a22aadffb55027d665491adf466bced61a. Romain Izard recently reported that commit 7a9618a22aad ended up allowing every legacy gadget driver to statically linked to the kernel, however that doesn't work, since only one legacy gadget can be bound to a controller. Because of that, let's revert the original commit and fix the problem. Reported-by: Romain Izard Signed-off-by: Felipe Balbi --- drivers/usb/gadget/Kconfig | 4 ++-- drivers/usb/gadget/legacy/Kconfig | 10 ---------- 2 files changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 0a19a76645ad..31cce7805eb2 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -508,8 +508,8 @@ choice controller, and the relevant drivers for each function declared by the device. -endchoice - source "drivers/usb/gadget/legacy/Kconfig" +endchoice + endif # USB_GADGET diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 487568f2c729..784bf86dad4f 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -13,14 +13,6 @@ # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). # -menuconfig USB_GADGET_LEGACY - bool "Legacy USB Gadget Support" - help - Legacy USB gadgets are USB gadgets that do not use the USB gadget - configfs interface. - -if USB_GADGET_LEGACY - config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE @@ -498,5 +490,3 @@ config USB_G_WEBCAM Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_webcam". - -endif -- cgit v1.2.3-71-gd317 From 32fd87b3bbf5f7a045546401dfe2894dbbf4d8c3 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Mon, 11 Dec 2017 22:48:41 +0100 Subject: USB: core: only clean up what we allocated When cleaning up the configurations, make sure we only free the number of configurations and interfaces that we could have allocated. Reported-by: Andrey Konovalov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 55b198ba629b..93b38471754e 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -764,18 +764,21 @@ void usb_destroy_configuration(struct usb_device *dev) return; if (dev->rawdescriptors) { - for (i = 0; i < dev->descriptor.bNumConfigurations; i++) + for (i = 0; i < dev->descriptor.bNumConfigurations && + i < USB_MAXCONFIG; i++) kfree(dev->rawdescriptors[i]); kfree(dev->rawdescriptors); dev->rawdescriptors = NULL; } - for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { + for (c = 0; c < dev->descriptor.bNumConfigurations && + c < USB_MAXCONFIG; c++) { struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - for (i = 0; i < cf->desc.bNumInterfaces; i++) { + for (i = 0; i < cf->desc.bNumInterfaces && + i < USB_MAXINTERFACES; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, usb_release_interface_cache); -- cgit v1.2.3-71-gd317 From c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 12 Dec 2017 03:18:11 -0700 Subject: xen: XEN_ACPI_PROCESSOR is Dom0-only Add a respective dependency. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky --- drivers/xen/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index d8dd54678ab7..e5d0c28372ea 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -269,7 +269,7 @@ config XEN_ACPI_HOTPLUG_CPU config XEN_ACPI_PROCESSOR tristate "Xen ACPI processor" - depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ + depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ default m help This ACPI processor uploads Power Management information to the Xen -- cgit v1.2.3-71-gd317 From 0c31f1d7be1b5c4858b1d714dcefa25f41428cab Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Dec 2017 11:15:19 +0100 Subject: PCI: rcar: Fix use-after-free in probe error path If CONFIG_DEBUG_SLAB=y, and no PCIe card is inserted, the kernel crashes during probe on r8a7791/koelsch: rcar-pcie fe000000.pcie: PCIe link down Unable to handle kernel paging request at virtual address 6b6b6b6b (seeing this message requires earlycon and keep_bootcon). Indeed, pci_free_host_bridge() frees the PCI host bridge, including the embedded rcar_pcie object, so pci_free_resource_list() must not be called afterwards. To fix this, move the call to pci_free_resource_list() up, and update the label name accordingly. Fixes: ddd535f1ea3eb27e ("PCI: rcar: Fix memory leak when no PCIe card is inserted") Signed-off-by: Geert Uytterhoeven Signed-off-by: Bjorn Helgaas Acked-by: Simon Horman Acked-by: Lorenzo Pieralisi --- drivers/pci/host/pcie-rcar.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index 12796eccb2be..52ab3cb0a0bf 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -1128,12 +1128,12 @@ static int rcar_pcie_probe(struct platform_device *pdev) err = rcar_pcie_get_resources(pcie); if (err < 0) { dev_err(dev, "failed to request resources: %d\n", err); - goto err_free_bridge; + goto err_free_resource_list; } err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node); if (err) - goto err_free_bridge; + goto err_free_resource_list; pm_runtime_enable(dev); err = pm_runtime_get_sync(dev); @@ -1176,9 +1176,9 @@ err_pm_put: err_pm_disable: pm_runtime_disable(dev); -err_free_bridge: - pci_free_host_bridge(bridge); +err_free_resource_list: pci_free_resource_list(&pcie->resources); + pci_free_host_bridge(bridge); return err; } -- cgit v1.2.3-71-gd317 From a782fc8cc6bf6909daf3b65630079e2afec316ef Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 1 Dec 2017 18:21:34 +0800 Subject: drm/ttm: fix incorrect calculate on shrink_pages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit shrink_pages is in unit of Order after ttm_page_pool_free, but it is used by nr_free in next round so need change it into native page unit Signed-off-by: Monk Liu Reviewed-by: Roger He Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/ttm/ttm_page_alloc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c index 44343a2bf55c..71945ccaf012 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -455,6 +455,7 @@ ttm_pool_shrink_scan(struct shrinker *shrink, struct shrink_control *sc) freed += (nr_free_pool - shrink_pages) << pool->order; if (freed >= sc->nr_to_scan) break; + shrink_pages <<= pool->order; } mutex_unlock(&lock); return freed; -- cgit v1.2.3-71-gd317 From 13d3fc69a03721d972460fe2bff9b479f7999221 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 1 Dec 2017 18:23:56 +0800 Subject: drm/ttm: max_cpages is in unit of native page MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix calculation. Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/ttm/ttm_page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c index 71945ccaf012..b5ba6441489f 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -544,7 +544,7 @@ static int ttm_alloc_new_pages(struct list_head *pages, gfp_t gfp_flags, int r = 0; unsigned i, j, cpages; unsigned npages = 1 << order; - unsigned max_cpages = min(count, (unsigned)NUM_PAGES_TO_ALLOC); + unsigned max_cpages = min(count << order, (unsigned)NUM_PAGES_TO_ALLOC); /* allocate array for page caching change */ caching_array = kmalloc(max_cpages*sizeof(struct page *), GFP_KERNEL); -- cgit v1.2.3-71-gd317 From 0507f438ea19d4280006467ba02956f6a693deca Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Thu, 23 Nov 2017 18:38:59 +0800 Subject: drm/amdgpu: fix MAP_QUEUES paramter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Should be 0. Signed-off-by: Monk Liu Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index da43813d67a4..5aeb5f8816f3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -2467,7 +2467,7 @@ static int gfx_v9_0_kiq_kcq_enable(struct amdgpu_device *adev) PACKET3_MAP_QUEUES_PIPE(ring->pipe) | PACKET3_MAP_QUEUES_ME((ring->me == 1 ? 0 : 1)) | PACKET3_MAP_QUEUES_QUEUE_TYPE(0) | /*queue_type: normal compute queue */ - PACKET3_MAP_QUEUES_ALLOC_FORMAT(1) | /* alloc format: all_on_one_pipe */ + PACKET3_MAP_QUEUES_ALLOC_FORMAT(0) | /* alloc format: all_on_one_pipe */ PACKET3_MAP_QUEUES_ENGINE_SEL(0) | /* engine_sel: compute */ PACKET3_MAP_QUEUES_NUM_QUEUES(1)); /* num_queues: must be 1 */ amdgpu_ring_write(kiq_ring, PACKET3_MAP_QUEUES_DOORBELL_OFFSET(ring->doorbell_index)); -- cgit v1.2.3-71-gd317 From 9c41e452188339989c2c9ca5fc54f10935207968 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Thu, 30 Nov 2017 09:43:57 +0100 Subject: i2c: stm32: Fix copyrights Uniformize STMicroelectronics copyrights headers and add SPDX identifier. Signed-off-by: Benjamin Gaignard Acked-by: Alexandre TORGUE Acked-by: Pierre-Yves MORDRET Acked-by: M'boumba Cedric Madianga Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stm32.h | 3 ++- drivers/i2c/busses/i2c-stm32f4.c | 3 ++- drivers/i2c/busses/i2c-stm32f7.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h index dab51761f8c5..d4f9cef251ac 100644 --- a/drivers/i2c/busses/i2c-stm32.h +++ b/drivers/i2c/busses/i2c-stm32.h @@ -1,10 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 /* * i2c-stm32.h * * Copyright (C) M'boumba Cedric Madianga 2017 + * Copyright (C) STMicroelectronics 2017 * Author: M'boumba Cedric Madianga * - * License terms: GNU General Public License (GPL), version 2 */ #ifndef _I2C_STM32_H diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index 4ec108496f15..47c8d00de53f 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for STMicroelectronics STM32 I2C controller * @@ -6,11 +7,11 @@ * http://www.st.com/resource/en/reference_manual/DM00031020.pdf * * Copyright (C) M'boumba Cedric Madianga 2016 + * Copyright (C) STMicroelectronics 2017 * Author: M'boumba Cedric Madianga * * This driver is based on i2c-st.c * - * License terms: GNU General Public License (GPL), version 2 */ #include diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index d4a6e9c2e9aa..b445b3bb0bb1 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for STMicroelectronics STM32F7 I2C controller * @@ -7,11 +8,11 @@ * http://www.st.com/resource/en/reference_manual/dm00124865.pdf * * Copyright (C) M'boumba Cedric Madianga 2017 + * Copyright (C) STMicroelectronics 2017 * Author: M'boumba Cedric Madianga * * This driver is based on i2c-stm32f4.c * - * License terms: GNU General Public License (GPL), version 2 */ #include #include -- cgit v1.2.3-71-gd317 From 45fd4470ba86e9ca2837b666a52cc65dc69f0fa3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 7 Dec 2017 12:25:45 +0100 Subject: i2c: piix4: Fix port number check on release The port number shift is still hard-coded to 1 while it now depends on the hardware. Thankfully 0 is always 0 no matter how you shift it, so this was a bug without consequences. Signed-off-by: Jean Delvare Fixes: 0fe16195f891 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-piix4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 174579d32e5f..462948e2c535 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -983,7 +983,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap) if (adapdata->smba) { i2c_del_adapter(adap); - if (adapdata->port == (0 << 1)) { + if (adapdata->port == (0 << piix4_port_shift_sb800)) { release_region(adapdata->smba, SMBIOSIZE); if (adapdata->sb800_main) release_region(SB800_PIIX4_SMB_IDX, 2); -- cgit v1.2.3-71-gd317 From 964728f9f407eca0b417fdf8e784b7a76979490c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 13 Nov 2017 11:12:58 +0100 Subject: USB: chipidea: msm: fix ulpi-node lookup Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately, but that fix was apparently never backported to stable. Fixes: 47654a162081 ("usb: chipidea: msm: Restore wrapper settings after reset") Fixes: b74c43156c0c ("usb: chipidea: msm: ci_hdrc_msm_probe() missing of_node_get()") Cc: stable # 4.10: b74c43156c0c Cc: Stephen Boyd Cc: Frank Rowand Signed-off-by: Johan Hovold Signed-off-by: Peter Chen --- drivers/usb/chipidea/ci_hdrc_msm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index 3593ce0ec641..880009987460 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -247,7 +247,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) if (ret) goto err_mux; - ulpi_node = of_find_node_by_name(of_node_get(pdev->dev.of_node), "ulpi"); + ulpi_node = of_get_child_by_name(pdev->dev.of_node, "ulpi"); if (ulpi_node) { phy_node = of_get_next_available_child(ulpi_node, NULL); ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy"); -- cgit v1.2.3-71-gd317 From cf4df407e0d7cde60a45369c2a3414d18e2d4fdd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 13 Dec 2017 11:59:39 +0100 Subject: Revert "USB: core: only clean up what we allocated" This reverts commit 32fd87b3bbf5f7a045546401dfe2894dbbf4d8c3. Alan wrote a better fix for this... Cc: Andrey Konovalov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 93b38471754e..55b198ba629b 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -764,21 +764,18 @@ void usb_destroy_configuration(struct usb_device *dev) return; if (dev->rawdescriptors) { - for (i = 0; i < dev->descriptor.bNumConfigurations && - i < USB_MAXCONFIG; i++) + for (i = 0; i < dev->descriptor.bNumConfigurations; i++) kfree(dev->rawdescriptors[i]); kfree(dev->rawdescriptors); dev->rawdescriptors = NULL; } - for (c = 0; c < dev->descriptor.bNumConfigurations && - c < USB_MAXCONFIG; c++) { + for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - for (i = 0; i < cf->desc.bNumInterfaces && - i < USB_MAXINTERFACES; i++) { + for (i = 0; i < cf->desc.bNumInterfaces; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, usb_release_interface_cache); -- cgit v1.2.3-71-gd317 From 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 12 Dec 2017 14:25:13 -0500 Subject: USB: core: prevent malicious bNumInterfaces overflow A malicious USB device with crafted descriptors can cause the kernel to access unallocated memory by setting the bNumInterfaces value too high in a configuration descriptor. Although the value is adjusted during parsing, this adjustment is skipped in one of the error return paths. This patch prevents the problem by setting bNumInterfaces to 0 initially. The existing code already sets it to the proper value after parsing is complete. Signed-off-by: Alan Stern Reported-by: Andrey Konovalov CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 55b198ba629b..78e92d29f8d9 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -555,6 +555,9 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, unsigned iad_num = 0; memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE); + nintf = nintf_orig = config->desc.bNumInterfaces; + config->desc.bNumInterfaces = 0; // Adjusted later + if (config->desc.bDescriptorType != USB_DT_CONFIG || config->desc.bLength < USB_DT_CONFIG_SIZE || config->desc.bLength > size) { @@ -568,7 +571,6 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, buffer += config->desc.bLength; size -= config->desc.bLength; - nintf = nintf_orig = config->desc.bNumInterfaces; if (nintf > USB_MAXINTERFACES) { dev_warn(ddev, "config %d has too many interfaces: %d, " "using maximum allowed: %d\n", -- cgit v1.2.3-71-gd317 From 4b4df570b41dbb421f52605357d5d56c872df6d9 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 13 Dec 2017 00:44:26 -0800 Subject: drm: Update edid-derived drm_display_info fields at edid property set [v2] There are a set of values in the drm_display_info structure for each connector which hold information derived from EDID. These are computed in drm_add_display_info. Before this patch, that was only called in drm_add_edid_modes. This meant that they were only set when EDID was present and never reset when EDID was not, as happened when the display was disconnected. One of these fields, non_desktop, is used from drm_mode_connector_update_edid_property, the function responsible for assigning the new edid value to the application-visible property. Various drivers call these two functions (drm_add_edid_modes and drm_mode_connector_update_edid_property) in different orders. This means that even when EDID is present, the drm_display_info fields may not have been computed at the time that drm_mode_connector_update_edid_property used the non_desktop value to set the non_desktop property. I've added a public function (drm_reset_display_info) that resets the drm_display_info field values to default values and then made the drm_add_display_info function public. These two functions are now called directly from drm_mode_connector_update_edid_property so that the drm_display_info fields are always computed from the current EDID information before being used in that function. This means that the drm_display_info values are often computed twice, once when the EDID property it set and a second time when EDID is used to compute modes for the device. The alternative would be to uniformly ensure that the values were computed once before being used, which would require that all drivers reliably invoke the two paths in the same order. The computation is inexpensive enough that it seems more maintainable in the long term to simply compute them in both paths. The API to drm_add_display_info has been changed so that it no longer takes the set of edid-based quirks as a parameter. Rather, it now computes those quirks itself and returns them for further use by drm_add_edid_modes. This patch also includes a number of 'const' additions caused by drm_mode_connector_update_edid_property taking a 'const struct edid *' parameter and wanting to pass that along to drm_add_display_info. v2: after review by Daniel Vetter Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and drm_add_display_info. Added FIXME in drm_mode_connector_update_edid_property about potentially merging that with drm_add_edid_modes to avoid the need for two driver calls. Signed-off-by: Keith Packard Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com (danvet: cherry picked from commit 12a889bf4bca ("drm: rework delayed connector cleanup in connector_iter") from drm-misc-next since functional conflict with changes in -next and we need to make sure both have the right version and nothing gets lost.) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_connector.c | 13 +++++++++++ drivers/gpu/drm/drm_edid.c | 52 ++++++++++++++++++++++++++++++----------- include/drm/drm_edid.h | 2 ++ 3 files changed, 53 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 482014137953..c4dfcbc861a1 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -1231,6 +1231,19 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector, if (edid) size = EDID_LENGTH * (1 + edid->extensions); + /* Set the display info, using edid if available, otherwise + * reseting the values to defaults. This duplicates the work + * done in drm_add_edid_modes, but that function is not + * consistently called before this one in all drivers and the + * computation is cheap enough that it seems better to + * duplicate it rather than attempt to ensure some arbitrary + * ordering of calls. + */ + if (edid) + drm_add_display_info(connector, edid); + else + drm_reset_display_info(connector); + drm_object_property_set_value(&connector->base, dev->mode_config.non_desktop_property, connector->display_info.non_desktop); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 5dfe14763871..cb487148359a 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -1731,7 +1731,7 @@ EXPORT_SYMBOL(drm_edid_duplicate); * * Returns true if @vendor is in @edid, false otherwise */ -static bool edid_vendor(struct edid *edid, const char *vendor) +static bool edid_vendor(const struct edid *edid, const char *vendor) { char edid_vendor[3]; @@ -1749,7 +1749,7 @@ static bool edid_vendor(struct edid *edid, const char *vendor) * * This tells subsequent routines what fixes they need to apply. */ -static u32 edid_get_quirks(struct edid *edid) +static u32 edid_get_quirks(const struct edid *edid) { const struct edid_quirk *quirk; int i; @@ -2813,7 +2813,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid, /* * Search EDID for CEA extension block. */ -static u8 *drm_find_edid_extension(struct edid *edid, int ext_id) +static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id) { u8 *edid_ext = NULL; int i; @@ -2835,12 +2835,12 @@ static u8 *drm_find_edid_extension(struct edid *edid, int ext_id) return edid_ext; } -static u8 *drm_find_cea_extension(struct edid *edid) +static u8 *drm_find_cea_extension(const struct edid *edid) { return drm_find_edid_extension(edid, CEA_EXT); } -static u8 *drm_find_displayid_extension(struct edid *edid) +static u8 *drm_find_displayid_extension(const struct edid *edid) { return drm_find_edid_extension(edid, DISPLAYID_EXT); } @@ -4363,7 +4363,7 @@ drm_parse_hdmi_vsdb_video(struct drm_connector *connector, const u8 *db) } static void drm_parse_cea_ext(struct drm_connector *connector, - struct edid *edid) + const struct edid *edid) { struct drm_display_info *info = &connector->display_info; const u8 *edid_ext; @@ -4397,11 +4397,33 @@ static void drm_parse_cea_ext(struct drm_connector *connector, } } -static void drm_add_display_info(struct drm_connector *connector, - struct edid *edid, u32 quirks) +/* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset + * all of the values which would have been set from EDID + */ +void +drm_reset_display_info(struct drm_connector *connector) { struct drm_display_info *info = &connector->display_info; + info->width_mm = 0; + info->height_mm = 0; + + info->bpc = 0; + info->color_formats = 0; + info->cea_rev = 0; + info->max_tmds_clock = 0; + info->dvi_dual = false; + + info->non_desktop = 0; +} +EXPORT_SYMBOL_GPL(drm_reset_display_info); + +u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid) +{ + struct drm_display_info *info = &connector->display_info; + + u32 quirks = edid_get_quirks(edid); + info->width_mm = edid->width_cm * 10; info->height_mm = edid->height_cm * 10; @@ -4414,11 +4436,13 @@ static void drm_add_display_info(struct drm_connector *connector, info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP); + DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop); + if (edid->revision < 3) - return; + return quirks; if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) - return; + return quirks; drm_parse_cea_ext(connector, edid); @@ -4438,7 +4462,7 @@ static void drm_add_display_info(struct drm_connector *connector, /* Only defined for 1.4 with digital displays */ if (edid->revision < 4) - return; + return quirks; switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) { case DRM_EDID_DIGITAL_DEPTH_6: @@ -4473,7 +4497,9 @@ static void drm_add_display_info(struct drm_connector *connector, info->color_formats |= DRM_COLOR_FORMAT_YCRCB444; if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422) info->color_formats |= DRM_COLOR_FORMAT_YCRCB422; + return quirks; } +EXPORT_SYMBOL_GPL(drm_add_display_info); static int validate_displayid(u8 *displayid, int length, int idx) { @@ -4627,14 +4653,12 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid) return 0; } - quirks = edid_get_quirks(edid); - /* * CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks. * To avoid multiple parsing of same block, lets parse that map * from sink info, before parsing CEA modes. */ - drm_add_display_info(connector, edid, quirks); + quirks = drm_add_display_info(connector, edid); /* * EDID spec says modes should be preferred in this order: diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 2ec41d032e56..efe6d5a8e834 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -465,6 +465,8 @@ struct edid *drm_get_edid(struct drm_connector *connector, struct edid *drm_get_edid_switcheroo(struct drm_connector *connector, struct i2c_adapter *adapter); struct edid *drm_edid_duplicate(const struct edid *edid); +void drm_reset_display_info(struct drm_connector *connector); +u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid); int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); u8 drm_match_cea_mode(const struct drm_display_mode *to_match); -- cgit v1.2.3-71-gd317 From 6b782f43d34974c7909306fd9af06241d658a1f7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 11 Dec 2017 09:54:09 +0100 Subject: Revert "ravb: add workaround for clock when resuming with WoL enabled" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit fbf3d034f2ff6264183cfa6845770e8cc2a986c8. As of commit 560869100b99a3da ("clk: renesas: cpg-mssr: Restore module clocks during resume"), the workaround is no longer needed. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 27 ++------------------------- 1 file changed, 2 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 2b962d349f5f..009780df664b 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2308,32 +2308,9 @@ static int __maybe_unused ravb_resume(struct device *dev) struct ravb_private *priv = netdev_priv(ndev); int ret = 0; - if (priv->wol_enabled) { - /* Reduce the usecount of the clock to zero and then - * restore it to its original value. This is done to force - * the clock to be re-enabled which is a workaround - * for renesas-cpg-mssr driver which do not enable clocks - * when resuming from PSCI suspend/resume. - * - * Without this workaround the driver fails to communicate - * with the hardware if WoL was enabled when the system - * entered PSCI suspend. This is due to that if WoL is enabled - * we explicitly keep the clock from being turned off when - * suspending, but in PSCI sleep power is cut so the clock - * is disabled anyhow, the clock driver is not aware of this - * so the clock is not turned back on when resuming. - * - * TODO: once the renesas-cpg-mssr suspend/resume is working - * this clock dance should be removed. - */ - clk_disable(priv->clk); - clk_disable(priv->clk); - clk_enable(priv->clk); - clk_enable(priv->clk); - - /* Set reset mode to rearm the WoL logic */ + /* If WoL is enabled set reset mode to rearm the WoL logic */ + if (priv->wol_enabled) ravb_write(ndev, CCC_OPC_RESET, CCC); - } /* All register have been reset to default values. * Restore all registers which where setup at probe time and -- cgit v1.2.3-71-gd317 From 9d98e19ba08f6aa33a4a1414f3dfe8440e67530c Mon Sep 17 00:00:00 2001 From: Yuval Shaia Date: Wed, 13 Dec 2017 12:25:19 +0200 Subject: IB/ipoib: Restore MM behavior in case of tx_ring allocation failure memalloc_noio_save modifies the behavior of MM, we must restore it after we are done. Fixes: d83187dda9b9 ("IB/IPoIB: Convert IPoIB to memalloc_noio_* calls") Signed-off-by: Yuval Shaia Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 87f4bd99cdf7..2c13123bfd69 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1145,6 +1145,7 @@ static int ipoib_cm_tx_init(struct ipoib_cm_tx *p, u32 qpn, noio_flag = memalloc_noio_save(); p->tx_ring = vzalloc(ipoib_sendq_size * sizeof(*p->tx_ring)); if (!p->tx_ring) { + memalloc_noio_restore(noio_flag); ret = -ENOMEM; goto err_tx; } -- cgit v1.2.3-71-gd317 From aceef61ee56898cfa7b6960fb60b9326c3860441 Mon Sep 17 00:00:00 2001 From: Sebastian Sjoholm Date: Mon, 11 Dec 2017 21:51:14 +0100 Subject: net: qmi_wwan: add Sierra EM7565 1199:9091 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by: Sebastian Sjoholm Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 304ec6555cd8..d2ca5a202e8d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1204,6 +1204,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */ {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */ + {QMI_FIXED_INTF(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ -- cgit v1.2.3-71-gd317 From 2a9ee696c72a24d63529c76483fcd92d04b1d2b7 Mon Sep 17 00:00:00 2001 From: Branislav Radocaj Date: Tue, 12 Dec 2017 00:13:38 +0100 Subject: net: ethernet: arc: fix error handling in emac_rockchip_probe If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Changes since v2 [1]: * Merged with latest code changes Changes since v1: Update made thanks to David's review, much appreciated David. * Improved inconsistent failure handling of clock rate setting * For completeness of usecase, added arc_emac_probe error handling Signed-off-by: Branislav Radocaj Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_rockchip.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c index c6163874e4e7..16f9bee992fe 100644 --- a/drivers/net/ethernet/arc/emac_rockchip.c +++ b/drivers/net/ethernet/arc/emac_rockchip.c @@ -199,9 +199,11 @@ static int emac_rockchip_probe(struct platform_device *pdev) /* RMII interface needs always a rate of 50MHz */ err = clk_set_rate(priv->refclk, 50000000); - if (err) + if (err) { dev_err(dev, "failed to change reference clock rate (%d)\n", err); + goto out_regulator_disable; + } if (priv->soc_data->need_div_macclk) { priv->macclk = devm_clk_get(dev, "macclk"); @@ -230,12 +232,14 @@ static int emac_rockchip_probe(struct platform_device *pdev) err = arc_emac_probe(ndev, interface); if (err) { dev_err(dev, "failed to probe arc emac (%d)\n", err); - goto out_regulator_disable; + goto out_clk_disable_macclk; } return 0; + out_clk_disable_macclk: - clk_disable_unprepare(priv->macclk); + if (priv->soc_data->need_div_macclk) + clk_disable_unprepare(priv->macclk); out_regulator_disable: if (priv->regulator) regulator_disable(priv->regulator); -- cgit v1.2.3-71-gd317 From 6e266610eb6553cfb7e7eb5d11914bd01509c406 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 12 Dec 2017 16:49:52 +0800 Subject: hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close The driver may sleep under a spinlock. The function call path is: rr_close (acquire the spinlock) free_irq --> may sleep To fix it, free_irq is moved to the place without holding the spinlock. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/hippi/rrunner.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 8483f03d5a41..1ab97d99b9ba 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -1379,8 +1379,8 @@ static int rr_close(struct net_device *dev) rrpriv->info_dma); rrpriv->info = NULL; - free_irq(pdev->irq, dev); spin_unlock_irqrestore(&rrpriv->lock, flags); + free_irq(pdev->irq, dev); return 0; } -- cgit v1.2.3-71-gd317 From 2e51a8dc7fdc9d06c52a0a0e442cc813357ea44d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Dec 2017 09:29:46 +0000 Subject: net: dsa: allow XAUI phy interface mode XGMII is a 32-bit bus plus two clock signals per direction. XAUI is four serial lanes per direction. The 88e6190 supports XAUI but not XGMII as it doesn't have enough pins. The same is true of 88e6176. Match on PHY_INTERFACE_MODE_XAUI for the XAUI port type, but keep accepting XGMII for backwards compatibility. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/port.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index a7801f6668a5..6315774d72b3 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -338,6 +338,7 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port, cmode = MV88E6XXX_PORT_STS_CMODE_2500BASEX; break; case PHY_INTERFACE_MODE_XGMII: + case PHY_INTERFACE_MODE_XAUI: cmode = MV88E6XXX_PORT_STS_CMODE_XAUI; break; case PHY_INTERFACE_MODE_RXAUI: -- cgit v1.2.3-71-gd317 From f5e64032a799d4f54decc7eb6aafcdffb67f9ad9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Dec 2017 10:45:36 +0000 Subject: net: phy: fix resume handling When a PHY has the BMCR_PDOWN bit set, it may decide to ignore writes to other registers, or reset the registers to power-on defaults. Micrel PHYs do this for their interrupt registers. The current structure of phylib tries to enable interrupts before resuming (and releasing) the BMCR_PDOWN bit. This fails, causing Micrel PHYs to stop working after a suspend/resume sequence if they are using interrupts. Fix this by ensuring that the PHY driver resume methods do not take the phydev->lock mutex themselves, but the callers of phy_resume() take that lock. This then allows us to move the call to phy_resume() before we enable interrupts in phy_start(). Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 4 ---- drivers/net/phy/phy.c | 9 +++------ drivers/net/phy/phy_device.c | 10 ++++++---- 3 files changed, 9 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 5f93e6add563..e911e4990b20 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -239,14 +239,10 @@ static int at803x_resume(struct phy_device *phydev) { int value; - mutex_lock(&phydev->lock); - value = phy_read(phydev, MII_BMCR); value &= ~(BMCR_PDOWN | BMCR_ISOLATE); phy_write(phydev, MII_BMCR, value); - mutex_unlock(&phydev->lock); - return 0; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 2b1e67bc1e73..ed10d1fc8f59 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -828,7 +828,6 @@ EXPORT_SYMBOL(phy_stop); */ void phy_start(struct phy_device *phydev) { - bool do_resume = false; int err = 0; mutex_lock(&phydev->lock); @@ -841,6 +840,9 @@ void phy_start(struct phy_device *phydev) phydev->state = PHY_UP; break; case PHY_HALTED: + /* if phy was suspended, bring the physical link up again */ + phy_resume(phydev); + /* make sure interrupts are re-enabled for the PHY */ if (phydev->irq != PHY_POLL) { err = phy_enable_interrupts(phydev); @@ -849,17 +851,12 @@ void phy_start(struct phy_device *phydev) } phydev->state = PHY_RESUMING; - do_resume = true; break; default: break; } mutex_unlock(&phydev->lock); - /* if phy was suspended, bring the physical link up again */ - if (do_resume) - phy_resume(phydev); - phy_trigger_machine(phydev, true); } EXPORT_SYMBOL(phy_start); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 67f25ac29025..b15b31ca2618 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -135,7 +135,9 @@ static int mdio_bus_phy_resume(struct device *dev) if (!mdio_bus_phy_may_suspend(phydev)) goto no_resume; + mutex_lock(&phydev->lock); ret = phy_resume(phydev); + mutex_unlock(&phydev->lock); if (ret < 0) return ret; @@ -1026,7 +1028,9 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (err) goto error; + mutex_lock(&phydev->lock); phy_resume(phydev); + mutex_unlock(&phydev->lock); phy_led_triggers_register(phydev); return err; @@ -1157,6 +1161,8 @@ int phy_resume(struct phy_device *phydev) struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver); int ret = 0; + WARN_ON(!mutex_is_locked(&phydev->lock)); + if (phydev->drv && phydrv->resume) ret = phydrv->resume(phydev); @@ -1639,13 +1645,9 @@ int genphy_resume(struct phy_device *phydev) { int value; - mutex_lock(&phydev->lock); - value = phy_read(phydev, MII_BMCR); phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN); - mutex_unlock(&phydev->lock); - return 0; } EXPORT_SYMBOL(genphy_resume); -- cgit v1.2.3-71-gd317 From 94a5ef1b77da4674a6bc1d3de3051b758859d106 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Dec 2017 10:49:15 +0000 Subject: of_mdio / mdiobus: ensure mdio devices have fwnode correctly populated Ensure that all mdio devices populate the struct device fwnode pointer as well as the of_node pointer to allow drivers that wish to use fwnode APIs to work. Signed-off-by: Russell King Reviewed-by: Rob Herring Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 1 + drivers/of/of_mdio.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 2df7b62c1a36..54d00a1d2bef 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -270,6 +270,7 @@ static void of_mdiobus_link_mdiodev(struct mii_bus *bus, if (addr == mdiodev->addr) { dev->of_node = child; + dev->fwnode = of_fwnode_handle(child); return; } } diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 98258583abb0..3481e69738b5 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -81,6 +81,7 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, * can be looked up later */ of_node_get(child); phy->mdio.dev.of_node = child; + phy->mdio.dev.fwnode = of_fwnode_handle(child); /* All data is now stored in the phy struct; * register it */ @@ -111,6 +112,7 @@ static int of_mdiobus_register_device(struct mii_bus *mdio, */ of_node_get(child); mdiodev->dev.of_node = child; + mdiodev->dev.fwnode = of_fwnode_handle(child); /* All data is now stored in the mdiodev struct; register it. */ rc = mdio_device_register(mdiodev); @@ -206,6 +208,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) mdio->phy_mask = ~0; mdio->dev.of_node = np; + mdio->dev.fwnode = of_fwnode_handle(np); /* Get bus level PHY reset GPIO details */ mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY; -- cgit v1.2.3-71-gd317 From 3b3397e2031564db07022e99f04d4b9f3df6fced Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 12 Dec 2017 13:03:11 +0000 Subject: net: phy: meson-gxl: make function meson_gxl_read_status static The function meson_gxl_read_status is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'meson_gxl_read_status' was not declared. Should it be static? Signed-off-by: Colin Ian King Reviewed-by: Jerome Brunet Signed-off-by: David S. Miller --- drivers/net/phy/meson-gxl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 700007dd4be5..842eb871a6e3 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -67,7 +67,7 @@ static int meson_gxl_config_init(struct phy_device *phydev) * When this failure happens, the first retry is usually successful but, * in some cases, it may take up to 6 retries to get a decent result */ -int meson_gxl_read_status(struct phy_device *phydev) +static int meson_gxl_read_status(struct phy_device *phydev) { int ret, wol, lpa, exp; -- cgit v1.2.3-71-gd317 From c009cb842fcc0f84536a9d2692e6f063af5ac5c6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 12 Dec 2017 10:30:29 -0800 Subject: skge: remove redundunt free_irq under spinlock The code to handle multi-port SKGE boards was freeing IRQ twice. The first one was under lock and might sleep. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 6e423f098a60..31efc47c847e 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -4081,7 +4081,6 @@ static void skge_remove(struct pci_dev *pdev) if (hw->ports > 1) { skge_write32(hw, B0_IMSK, 0); skge_read32(hw, B0_IMSK); - free_irq(pdev->irq, hw); } spin_unlock_irq(&hw->hw_lock); -- cgit v1.2.3-71-gd317 From de9c4e06bbe872d725f306e34f3eea21155488e2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Dec 2017 09:22:03 +0000 Subject: net: phy: marvell: avoid configuring fiber page for SGMII-to-Copper When in SGMII-to-Copper mode, the fiber page is used for the MAC facing link, and does not require configuration of the fiber auto-negotiation settings. Avoid trying. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4d02b27df044..b5a8f750e433 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -637,6 +637,10 @@ static int m88e1510_config_aneg(struct phy_device *phydev) if (err < 0) goto error; + /* Do not touch the fiber page if we're in copper->sgmii mode */ + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) + return 0; + /* Then the fiber link */ err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE); if (err < 0) -- cgit v1.2.3-71-gd317 From 78034f5fdd622520eb843301cf35ce6c626543a7 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Wed, 13 Dec 2017 18:12:09 +0200 Subject: net/mlx4_en: Fix selftest for small MTUs Set the minimal MTU threshold for running loopback selftest. MTU should be big enough to include packet payload, NET_IP_ALIGN, Ethernet headers and preamble length. Fixes: e7c1c2c46201 ("mlx4_en: Added self diagnostics test implementation") Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_selftest.c | 2 +- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c index 88699b181946..946d9db7c8c2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c @@ -185,7 +185,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf) if (priv->mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UC_LOOPBACK) { buf[3] = mlx4_en_test_registers(priv); - if (priv->port_up) + if (priv->port_up && dev->mtu >= MLX4_SELFTEST_LB_MIN_MTU) buf[4] = mlx4_en_test_loopback(priv); } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 1856e279a7e0..2b72677eccd4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -153,6 +153,9 @@ #define SMALL_PACKET_SIZE (256 - NET_IP_ALIGN) #define HEADER_COPY_SIZE (128 - NET_IP_ALIGN) #define MLX4_LOOPBACK_TEST_PAYLOAD (HEADER_COPY_SIZE - ETH_HLEN) +#define PREAMBLE_LEN 8 +#define MLX4_SELFTEST_LB_MIN_MTU (MLX4_LOOPBACK_TEST_PAYLOAD + NET_IP_ALIGN + \ + ETH_HLEN + PREAMBLE_LEN) #define MLX4_EN_MIN_MTU 46 /* VLAN_HLEN is added twice,to support skb vlan tagged with multiple -- cgit v1.2.3-71-gd317 From 0bb9fc4f5429ac970181c073aa32e521e20f7b73 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Wed, 13 Dec 2017 18:12:10 +0200 Subject: net/mlx4_core: Fix wrong calculation of free counters The field res_free indicates the total number of counters which are available for allocation (reserved and unreserved). Fixed a bug where the reserved counters were subtracted from res_free before any allocation was performed. Before this fix, free counters which were not reserved could not be allocated. Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha Reviewed-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 04304dd894c6..606a0e0beeae 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -611,7 +611,6 @@ int mlx4_init_resource_tracker(struct mlx4_dev *dev) MLX4_MAX_PORTS; else res_alloc->guaranteed[t] = 0; - res_alloc->res_free -= res_alloc->guaranteed[t]; break; default: break; -- cgit v1.2.3-71-gd317 From 5a1647c391ba543a77a400dddf89053ec5c2b7a4 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Wed, 13 Dec 2017 18:12:11 +0200 Subject: net/mlx4_en: Fill all counters under one call of stats lock Before this patch, the stats_lock was acquired twice. In between the locks Driver sent command to gather some more statistics (per priority and counter statistics). If the stats lock was acquired by get statistics NDO in between we would have report out of sync counters. Fix this by collecting all stats from Firmware in advance and then fill the Software structs under one lock. Fixes: 0b131561a7d6 ("net/mlx4_en: Add Flow control statistics display via ethtool") Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_port.c | 57 +++++++++++++++------------- 1 file changed, 31 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index e0eb695318e6..1fa4849a6f56 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -188,7 +188,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct net_device *dev = mdev->pndev[port]; struct mlx4_en_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; - struct mlx4_cmd_mailbox *mailbox; + struct mlx4_cmd_mailbox *mailbox, *mailbox_priority; u64 in_mod = reset << 8 | port; int err; int i, counter_index; @@ -198,6 +198,13 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); if (IS_ERR(mailbox)) return PTR_ERR(mailbox); + + mailbox_priority = mlx4_alloc_cmd_mailbox(mdev->dev); + if (IS_ERR(mailbox_priority)) { + mlx4_free_cmd_mailbox(mdev->dev, mailbox); + return PTR_ERR(mailbox_priority); + } + err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, in_mod, 0, MLX4_CMD_DUMP_ETH_STATS, MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); @@ -206,6 +213,28 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) mlx4_en_stats = mailbox->buf; + memset(&tmp_counter_stats, 0, sizeof(tmp_counter_stats)); + counter_index = mlx4_get_default_counter_index(mdev->dev, port); + err = mlx4_get_counter_stats(mdev->dev, counter_index, + &tmp_counter_stats, reset); + + /* 0xffs indicates invalid value */ + memset(mailbox_priority->buf, 0xff, + sizeof(*flowstats) * MLX4_NUM_PRIORITIES); + + if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_FLOWSTATS_EN) { + memset(mailbox_priority->buf, 0, + sizeof(*flowstats) * MLX4_NUM_PRIORITIES); + err = mlx4_cmd_box(mdev->dev, 0, mailbox_priority->dma, + in_mod | MLX4_DUMP_ETH_STATS_FLOW_CONTROL, + 0, MLX4_CMD_DUMP_ETH_STATS, + MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); + if (err) + goto out; + } + + flowstats = mailbox_priority->buf; + spin_lock_bh(&priv->stats_lock); mlx4_en_fold_software_stats(dev); @@ -345,31 +374,6 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) priv->pkstats.tx_prio[8][0] = be64_to_cpu(mlx4_en_stats->TTOT_novlan); priv->pkstats.tx_prio[8][1] = be64_to_cpu(mlx4_en_stats->TOCT_novlan); - spin_unlock_bh(&priv->stats_lock); - - memset(&tmp_counter_stats, 0, sizeof(tmp_counter_stats)); - counter_index = mlx4_get_default_counter_index(mdev->dev, port); - err = mlx4_get_counter_stats(mdev->dev, counter_index, - &tmp_counter_stats, reset); - - /* 0xffs indicates invalid value */ - memset(mailbox->buf, 0xff, sizeof(*flowstats) * MLX4_NUM_PRIORITIES); - - if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_FLOWSTATS_EN) { - memset(mailbox->buf, 0, - sizeof(*flowstats) * MLX4_NUM_PRIORITIES); - err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, - in_mod | MLX4_DUMP_ETH_STATS_FLOW_CONTROL, - 0, MLX4_CMD_DUMP_ETH_STATS, - MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); - if (err) - goto out; - } - - flowstats = mailbox->buf; - - spin_lock_bh(&priv->stats_lock); - if (tmp_counter_stats.counter_mode == 0) { priv->pf_stats.rx_bytes = be64_to_cpu(tmp_counter_stats.rx_bytes); priv->pf_stats.tx_bytes = be64_to_cpu(tmp_counter_stats.tx_bytes); @@ -410,6 +414,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) out: mlx4_free_cmd_mailbox(mdev->dev, mailbox); + mlx4_free_cmd_mailbox(mdev->dev, mailbox_priority); return err; } -- cgit v1.2.3-71-gd317 From ea497bb92064875497554ee7cdf10df7fb7393fc Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 13 Dec 2017 13:49:36 +0100 Subject: drm: rework delayed connector cleanup in connector_iter PROBE_DEFER also uses system_wq to reprobe drivers, which means when that again fails, and we try to flush the overall system_wq (to get all the delayed connectore cleanup work_struct completed), we deadlock. Fix this by using just a single cleanup work, so that we can only flush that one and don't block on anything else. That means a free list plus locking, a standard pattern. v2: - Correctly free connectors only on last ref. Oops (Chris). - use llist_head/node (Chris). v3 - Add init_llist_head (Chris). Fixes: a703c55004e1 ("drm: safely free connectors from connector_iter") Fixes: 613051dac40d ("drm: locking&new iterators for connector_list") Cc: Ben Widawsky Cc: Dave Airlie Cc: Chris Wilson Cc: Sean Paul Cc: # v4.11+: 613051dac40d ("drm: locking&new iterators for connector_list" Cc: # v4.11+ Cc: Daniel Vetter Cc: Jani Nikula Cc: Gustavo Padovan Cc: David Airlie Cc: Javier Martinez Canillas Cc: Shuah Khan Cc: Guillaume Tucker Cc: Mark Brown Cc: Kevin Hilman Cc: Matt Hart Cc: Thierry Escande Cc: Tomeu Vizoso Cc: Enric Balletbo i Serra Tested-by: Marek Szyprowski Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_connector.c | 50 ++++++++++++++++++++++++++----------- drivers/gpu/drm/drm_crtc_internal.h | 1 + drivers/gpu/drm/drm_mode_config.c | 5 +++- include/drm/drm_connector.h | 10 +++++--- include/drm/drm_mode_config.h | 18 ++++++++++++- 5 files changed, 63 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index c4dfcbc861a1..9ae236036e32 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -152,14 +152,23 @@ static void drm_connector_free(struct kref *kref) connector->funcs->destroy(connector); } -static void drm_connector_free_work_fn(struct work_struct *work) +void drm_connector_free_work_fn(struct work_struct *work) { - struct drm_connector *connector = - container_of(work, struct drm_connector, free_work); - struct drm_device *dev = connector->dev; + struct drm_connector *connector, *n; + struct drm_device *dev = + container_of(work, struct drm_device, mode_config.connector_free_work); + struct drm_mode_config *config = &dev->mode_config; + unsigned long flags; + struct llist_node *freed; - drm_mode_object_unregister(dev, &connector->base); - connector->funcs->destroy(connector); + spin_lock_irqsave(&config->connector_list_lock, flags); + freed = llist_del_all(&config->connector_free_list); + spin_unlock_irqrestore(&config->connector_list_lock, flags); + + llist_for_each_entry_safe(connector, n, freed, free_node) { + drm_mode_object_unregister(dev, &connector->base); + connector->funcs->destroy(connector); + } } /** @@ -191,8 +200,6 @@ int drm_connector_init(struct drm_device *dev, if (ret) return ret; - INIT_WORK(&connector->free_work, drm_connector_free_work_fn); - connector->base.properties = &connector->properties; connector->dev = dev; connector->funcs = funcs; @@ -547,10 +554,17 @@ EXPORT_SYMBOL(drm_connector_list_iter_begin); * actually release the connector when dropping our final reference. */ static void -drm_connector_put_safe(struct drm_connector *conn) +__drm_connector_put_safe(struct drm_connector *conn) { - if (refcount_dec_and_test(&conn->base.refcount.refcount)) - schedule_work(&conn->free_work); + struct drm_mode_config *config = &conn->dev->mode_config; + + lockdep_assert_held(&config->connector_list_lock); + + if (!refcount_dec_and_test(&conn->base.refcount.refcount)) + return; + + llist_add(&conn->free_node, &config->connector_free_list); + schedule_work(&config->connector_free_work); } /** @@ -582,10 +596,10 @@ drm_connector_list_iter_next(struct drm_connector_list_iter *iter) /* loop until it's not a zombie connector */ } while (!kref_get_unless_zero(&iter->conn->base.refcount)); - spin_unlock_irqrestore(&config->connector_list_lock, flags); if (old_conn) - drm_connector_put_safe(old_conn); + __drm_connector_put_safe(old_conn); + spin_unlock_irqrestore(&config->connector_list_lock, flags); return iter->conn; } @@ -602,9 +616,15 @@ EXPORT_SYMBOL(drm_connector_list_iter_next); */ void drm_connector_list_iter_end(struct drm_connector_list_iter *iter) { + struct drm_mode_config *config = &iter->dev->mode_config; + unsigned long flags; + iter->dev = NULL; - if (iter->conn) - drm_connector_put_safe(iter->conn); + if (iter->conn) { + spin_lock_irqsave(&config->connector_list_lock, flags); + __drm_connector_put_safe(iter->conn); + spin_unlock_irqrestore(&config->connector_list_lock, flags); + } lock_release(&connector_list_iter_dep_map, 0, _RET_IP_); } EXPORT_SYMBOL(drm_connector_list_iter_end); diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h index 9ebb8841778c..af00f42ba269 100644 --- a/drivers/gpu/drm/drm_crtc_internal.h +++ b/drivers/gpu/drm/drm_crtc_internal.h @@ -142,6 +142,7 @@ int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj, uint64_t value); int drm_connector_create_standard_properties(struct drm_device *dev); const char *drm_get_connector_force_name(enum drm_connector_force force); +void drm_connector_free_work_fn(struct work_struct *work); /* IOCTL */ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c index cc78b3d9e5e4..256de7313612 100644 --- a/drivers/gpu/drm/drm_mode_config.c +++ b/drivers/gpu/drm/drm_mode_config.c @@ -382,6 +382,9 @@ void drm_mode_config_init(struct drm_device *dev) ida_init(&dev->mode_config.connector_ida); spin_lock_init(&dev->mode_config.connector_list_lock); + init_llist_head(&dev->mode_config.connector_free_list); + INIT_WORK(&dev->mode_config.connector_free_work, drm_connector_free_work_fn); + drm_mode_create_standard_properties(dev); /* Just to be sure */ @@ -432,7 +435,7 @@ void drm_mode_config_cleanup(struct drm_device *dev) } drm_connector_list_iter_end(&conn_iter); /* connector_iter drops references in a work item. */ - flush_scheduled_work(); + flush_work(&dev->mode_config.connector_free_work); if (WARN_ON(!list_empty(&dev->mode_config.connector_list))) { drm_connector_list_iter_begin(dev, &conn_iter); drm_for_each_connector_iter(connector, &conn_iter) diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index a4649c56ca2f..5971577016a2 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -24,6 +24,7 @@ #define __DRM_CONNECTOR_H__ #include +#include #include #include #include @@ -918,12 +919,13 @@ struct drm_connector { uint16_t tile_h_size, tile_v_size; /** - * @free_work: + * @free_node: * - * Work used only by &drm_connector_iter to be able to clean up a - * connector from any context. + * List used only by &drm_connector_iter to be able to clean up a + * connector from any context, in conjunction with + * &drm_mode_config.connector_free_work. */ - struct work_struct free_work; + struct llist_node free_node; }; #define obj_to_connector(x) container_of(x, struct drm_connector, base) diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index b21e827c5c78..b0ce26d71296 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -393,7 +394,7 @@ struct drm_mode_config { /** * @connector_list_lock: Protects @num_connector and - * @connector_list. + * @connector_list and @connector_free_list. */ spinlock_t connector_list_lock; /** @@ -413,6 +414,21 @@ struct drm_mode_config { * &struct drm_connector_list_iter to walk this list. */ struct list_head connector_list; + /** + * @connector_free_list: + * + * List of connector objects linked with &drm_connector.free_head. + * Protected by @connector_list_lock. Used by + * drm_for_each_connector_iter() and + * &struct drm_connector_list_iter to savely free connectors using + * @connector_free_work. + */ + struct llist_head connector_free_list; + /** + * @connector_free_work: Work to clean up @connector_free_list. + */ + struct work_struct connector_free_work; + /** * @num_encoder: * -- cgit v1.2.3-71-gd317 From bd36d3bab2e3d08f80766c86487090dbceed4651 Mon Sep 17 00:00:00 2001 From: Marius Vlad Date: Wed, 13 Dec 2017 20:10:48 +0200 Subject: drm/drm_lease: Prevent deadlock in case drm_lease_create() fails This case can been seen when creating the lease with the same objects passed. [ 605.515097] 2 locks held by testapp/3337: [ 605.519027] #0: (&dev->mode_config.idr_mutex){......}, at: [] drm_mode_create_lease_ioctl+0x384/0x858 [ 605.530045] #1: (&dev->mode_config.idr_mutex){......}, at: [] drm_lease_destroy+0x2c/0x110 Which was causing the process to hang: [ 605.398827] [] __switch_to+0x94/0xa8 [ 605.404030] [] __schedule+0x1b0/0x698 [ 605.409322] [] schedule+0x3c/0xa8 [ 605.414260] [] schedule_preempt_disabled+0x20/0x38 [ 605.420677] [] mutex_lock_nested+0x158/0x340 [ 605.426572] [] drm_lease_destroy+0x2c/0x110 [ 605.432389] [] drm_master_put+0xc0/0xc8 [ 605.437845] [] drm_mode_create_lease_ioctl+0x47c/0x858 [ 605.444612] [] drm_ioctl+0x198/0x448 [ 605.449811] [] do_vfs_ioctl+0xa4/0x748 [ 605.455192] [] SyS_ioctl+0x8c/0xa0 [ 605.460216] [] __sys_trace_return+0x0/0x4 drm_mode_create_lease_ioctl() calls drm_lease_create() which acquires a lock on dev->mode_config.idr_mutex. In case of failure, drm_lease_create() calls drm_master_put() which in turn tries to acquire the same lock when calling drm_lease_destroy(). v2: - Reverse the order at exit in case of fail, so that unlocking takes place before dropping the reference. - Include detail information about deadlock (Daniel Vetter) Signed-off-by: Marius Vlad Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20171213181048.32719-1-marius-cristian.vlad@nxp.com --- drivers/gpu/drm/drm_lease.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_lease.c b/drivers/gpu/drm/drm_lease.c index d1eb56a1eff4..59849f02e2ad 100644 --- a/drivers/gpu/drm/drm_lease.c +++ b/drivers/gpu/drm/drm_lease.c @@ -254,10 +254,10 @@ static struct drm_master *drm_lease_create(struct drm_master *lessor, struct idr return lessee; out_lessee: - drm_master_put(&lessee); - mutex_unlock(&dev->mode_config.idr_mutex); + drm_master_put(&lessee); + return ERR_PTR(error); } -- cgit v1.2.3-71-gd317 From 2797c4a11f373b2545c2398ccb02e362ee66a142 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 4 Dec 2017 13:25:13 +0000 Subject: drm/i915: Flush pending GTT writes before unbinding From the shrinker paths, we want to relinquish the GPU and GGTT access to the object, releasing the backing storage back to the system for swapout. As a part of that process we would unpin the pages, marking them for access by the CPU (for the swapout/swapin). However, if that process was interrupted after unbind the vma, we missed a flush of the inflight GGTT writes before we made that GTT space available again for reuse, with the prospect that we would redirect them to another page. The bug dates back to the introduction of multiple GGTT vma, but the code itself dates to commit 02bef8f98d26 ("drm/i915: Unbind closed vma for i915_gem_object_unbind()"). Fixes: 02bef8f98d26 ("drm/i915: Unbind closed vma for i915_gem_object_unbind()") Fixes: c5ad54cf7dd8 ("drm/i915: Use partial view in mmap fault handler") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20171204132513.7303-1-chris@chris-wilson.co.uk (cherry picked from commit 5888fc9eac3c2ff96e76aeeb865fdb46ab2d711e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ad4050f7ab3b..18de6569d04a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -330,17 +330,10 @@ int i915_gem_object_unbind(struct drm_i915_gem_object *obj) * must wait for all rendering to complete to the object (as unbinding * must anyway), and retire the requests. */ - ret = i915_gem_object_wait(obj, - I915_WAIT_INTERRUPTIBLE | - I915_WAIT_LOCKED | - I915_WAIT_ALL, - MAX_SCHEDULE_TIMEOUT, - NULL); + ret = i915_gem_object_set_to_cpu_domain(obj, false); if (ret) return ret; - i915_gem_retire_requests(to_i915(obj->base.dev)); - while ((vma = list_first_entry_or_null(&obj->vma_list, struct i915_vma, obj_link))) { -- cgit v1.2.3-71-gd317 From 2b3a2e9f400acff4a4a9a2316e3e13b36b76b0e9 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 7 Dec 2017 22:00:25 +0000 Subject: drm/i915: Drop fb reference on load_detect_pipe failure path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When intel_modeset_setup_plane_state() fails drop the local framebuffer reference before jumping to the error, otherwise we leak the framebuffer. Signed-off-by: Chris Wilson Cc: Maarten Lankhorst Cc: Ville Syrjälä Cc: Daniel Vetter Fixes: edde361711ef ("drm/i915: Use atomic state to obtain load detection crtc, v3.") Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20171207220025.22698-1-chris@chris-wilson.co.uk (cherry picked from commit 3e72be177cf19ab3d62b3084d424dce7e71d847f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e8ccf89cb17b..ff9397030092 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9944,11 +9944,10 @@ found: } ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0); + drm_framebuffer_put(fb); if (ret) goto fail; - drm_framebuffer_put(fb); - ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode); if (ret) goto fail; -- cgit v1.2.3-71-gd317 From 74c7b0782b15bc2478f557cea34b3fe34d452dc6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 8 Dec 2017 12:10:33 +0000 Subject: drm/i915: Stop listening to request resubmission from the signaler kthread MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intent here was that we would be listening to i915_gem_request_unsubmit in order to cancel the signaler quickly and release the reference on the request. Cancelling the signaler is done directly via intel_engine_cancel_signaling (called from unsubmit), but that does not directly wake up the signaling thread, and neither does setting the request->global_seqno back to zero wake up listeners to the request->execute waitqueue. So the only time that listening to the request->execute waitqueue would wake up the signaling kthread would be on the request resubmission, during which time we would already receive wake ups from rejoining the global breadcrumbs wait rbtree. Trying to wake up to release the request remains an issue. If the signaling was cancelled and no other request required signaling, then it is possible for us to shutdown with the reference on the request still held. To ensure that we do not try to shutdown, leaking that request, we kick the signaling threads whenever we disarm the breadcrumbs, i.e. on parking the engine when idle. v2: We do need to be sure to release the last reference on stopping the kthread; asserting that it has been dropped already is insufficient. Fixes: d6a2289d9d6b ("drm/i915: Remove the preempted request from the execution queue") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: MichaÅ‚ Winiarski Link: https://patchwork.freedesktop.org/patch/msgid/20171208121033.5236-1-chris@chris-wilson.co.uk Acked-by: Daniel Vetter Reviewed-by: Tvrtko Ursulin (cherry picked from commit 776bc27fd8ab67a675cb0041d3af361af5d0e290) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_breadcrumbs.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_breadcrumbs.c b/drivers/gpu/drm/i915/intel_breadcrumbs.c index 5f8b9f1f40f1..bcbc7abe6693 100644 --- a/drivers/gpu/drm/i915/intel_breadcrumbs.c +++ b/drivers/gpu/drm/i915/intel_breadcrumbs.c @@ -186,7 +186,7 @@ void intel_engine_disarm_breadcrumbs(struct intel_engine_cs *engine) struct intel_wait *wait, *n, *first; if (!b->irq_armed) - return; + goto wakeup_signaler; /* We only disarm the irq when we are idle (all requests completed), * so if the bottom-half remains asleep, it missed the request @@ -208,6 +208,14 @@ void intel_engine_disarm_breadcrumbs(struct intel_engine_cs *engine) b->waiters = RB_ROOT; spin_unlock_irq(&b->rb_lock); + + /* + * The signaling thread may be asleep holding a reference to a request, + * that had its signaling cancelled prior to being preempted. We need + * to kick the signaler, just in case, to release any such reference. + */ +wakeup_signaler: + wake_up_process(b->signaler); } static bool use_fake_irq(const struct intel_breadcrumbs *b) @@ -651,23 +659,15 @@ static int intel_breadcrumbs_signaler(void *arg) } if (unlikely(do_schedule)) { - DEFINE_WAIT(exec); - if (kthread_should_park()) kthread_parkme(); - if (kthread_should_stop()) { - GEM_BUG_ON(request); + if (unlikely(kthread_should_stop())) { + i915_gem_request_put(request); break; } - if (request) - add_wait_queue(&request->execute, &exec); - schedule(); - - if (request) - remove_wait_queue(&request->execute, &exec); } i915_gem_request_put(request); } while (1); -- cgit v1.2.3-71-gd317 From 2cf654db8d7eafb973d28eb3cddf043d353e1345 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 13 Dec 2017 09:48:02 +0000 Subject: drm/i915/fence: Use rcu to defer freeing of irq_work It is illegal to perform an immediate free of the struct irq_work from inside the irq_work callback (as irq_work_run_list modifies work->flags after execution of the work->func()). As we use the irq_work to coordinate the freeing of the callback from two different softirq paths, we need to defer the kfree from inside our irq_work callback, for which we can use kfree_rcu. Fixes: 81c0ed21aa91 ("drm/i915/fence: Avoid del_timer_sync() from inside a timer") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20171213094802.28243-1-chris@chris-wilson.co.uk (cherry picked from commit 7d622351c94172a42bfe9b13bdb0fdc2be90ed3b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_sw_fence.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_sw_fence.c b/drivers/gpu/drm/i915/i915_sw_fence.c index e8ca67a129d2..ac236b88c99c 100644 --- a/drivers/gpu/drm/i915/i915_sw_fence.c +++ b/drivers/gpu/drm/i915/i915_sw_fence.c @@ -367,6 +367,7 @@ struct i915_sw_dma_fence_cb { struct dma_fence *dma; struct timer_list timer; struct irq_work work; + struct rcu_head rcu; }; static void timer_i915_sw_fence_wake(struct timer_list *t) @@ -406,7 +407,7 @@ static void irq_i915_sw_fence_work(struct irq_work *wrk) del_timer_sync(&cb->timer); dma_fence_put(cb->dma); - kfree(cb); + kfree_rcu(cb, rcu); } int i915_sw_fence_await_dma_fence(struct i915_sw_fence *fence, -- cgit v1.2.3-71-gd317 From c2e90800aef22e7ea14ea7560ba99993f11d3616 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 12 Dec 2017 13:45:50 +0000 Subject: virtio_mmio: fix devm cleanup Recent rework of the virtio_mmio probe/remove paths balanced a devm_ioremap() with an iounmap() rather than its devm variant. This ends up corrupting the devm datastructures, and results in the following boot-time splat on arm64 under QEMU 2.9.0: [ 3.450397] ------------[ cut here ]------------ [ 3.453822] Trying to vfree() nonexistent vm area (00000000c05b4844) [ 3.460534] WARNING: CPU: 1 PID: 1 at mm/vmalloc.c:1525 __vunmap+0x1b8/0x220 [ 3.475898] Kernel panic - not syncing: panic_on_warn set ... [ 3.475898] [ 3.493933] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3 #1 [ 3.513109] Hardware name: linux,dummy-virt (DT) [ 3.525382] Call trace: [ 3.531683] dump_backtrace+0x0/0x368 [ 3.543921] show_stack+0x20/0x30 [ 3.547767] dump_stack+0x108/0x164 [ 3.559584] panic+0x25c/0x51c [ 3.569184] __warn+0x29c/0x31c [ 3.576023] report_bug+0x1d4/0x290 [ 3.586069] bug_handler.part.2+0x40/0x100 [ 3.597820] bug_handler+0x4c/0x88 [ 3.608400] brk_handler+0x11c/0x218 [ 3.613430] do_debug_exception+0xe8/0x318 [ 3.627370] el1_dbg+0x18/0x78 [ 3.634037] __vunmap+0x1b8/0x220 [ 3.648747] vunmap+0x6c/0xc0 [ 3.653864] __iounmap+0x44/0x58 [ 3.659771] devm_ioremap_release+0x34/0x68 [ 3.672983] release_nodes+0x404/0x880 [ 3.683543] devres_release_all+0x6c/0xe8 [ 3.695692] driver_probe_device+0x250/0x828 [ 3.706187] __driver_attach+0x190/0x210 [ 3.717645] bus_for_each_dev+0x14c/0x1f0 [ 3.728633] driver_attach+0x48/0x78 [ 3.740249] bus_add_driver+0x26c/0x5b8 [ 3.752248] driver_register+0x16c/0x398 [ 3.757211] __platform_driver_register+0xd8/0x128 [ 3.770860] virtio_mmio_init+0x1c/0x24 [ 3.782671] do_one_initcall+0xe0/0x398 [ 3.791890] kernel_init_freeable+0x594/0x660 [ 3.798514] kernel_init+0x18/0x190 [ 3.810220] ret_from_fork+0x10/0x18 To fix this, we can simply rip out the explicit cleanup that the devm infrastructure will do for us when our probe function returns an error code, or when our remove function returns. We only need to ensure that we call put_device() if a call to register_virtio_device() fails in the probe path. Signed-off-by: Mark Rutland Fixes: 7eb781b1bbb7136f ("virtio_mmio: add cleanup for virtio_mmio_probe") Fixes: 25f32223bce5c580 ("virtio_mmio: add cleanup for virtio_mmio_remove") Cc: Cornelia Huck Cc: Michael S. Tsirkin Cc: weiping zhang Cc: virtualization@lists.linux-foundation.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck --- drivers/virtio/virtio_mmio.c | 43 +++++++++---------------------------------- 1 file changed, 9 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index a9192fe4f345..c92131edfaba 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -522,10 +522,8 @@ static int virtio_mmio_probe(struct platform_device *pdev) return -EBUSY; vm_dev = devm_kzalloc(&pdev->dev, sizeof(*vm_dev), GFP_KERNEL); - if (!vm_dev) { - rc = -ENOMEM; - goto free_mem; - } + if (!vm_dev) + return -ENOMEM; vm_dev->vdev.dev.parent = &pdev->dev; vm_dev->vdev.dev.release = virtio_mmio_release_dev; @@ -535,17 +533,14 @@ static int virtio_mmio_probe(struct platform_device *pdev) spin_lock_init(&vm_dev->lock); vm_dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem)); - if (vm_dev->base == NULL) { - rc = -EFAULT; - goto free_vmdev; - } + if (vm_dev->base == NULL) + return -EFAULT; /* Check magic value */ magic = readl(vm_dev->base + VIRTIO_MMIO_MAGIC_VALUE); if (magic != ('v' | 'i' << 8 | 'r' << 16 | 't' << 24)) { dev_warn(&pdev->dev, "Wrong magic value 0x%08lx!\n", magic); - rc = -ENODEV; - goto unmap; + return -ENODEV; } /* Check device version */ @@ -553,8 +548,7 @@ static int virtio_mmio_probe(struct platform_device *pdev) if (vm_dev->version < 1 || vm_dev->version > 2) { dev_err(&pdev->dev, "Version %ld not supported!\n", vm_dev->version); - rc = -ENXIO; - goto unmap; + return -ENXIO; } vm_dev->vdev.id.device = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_ID); @@ -563,8 +557,7 @@ static int virtio_mmio_probe(struct platform_device *pdev) * virtio-mmio device with an ID 0 is a (dummy) placeholder * with no function. End probing now with no error reported. */ - rc = -ENODEV; - goto unmap; + return -ENODEV; } vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID); @@ -590,33 +583,15 @@ static int virtio_mmio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, vm_dev); rc = register_virtio_device(&vm_dev->vdev); - if (rc) { - iounmap(vm_dev->base); - devm_release_mem_region(&pdev->dev, mem->start, - resource_size(mem)); + if (rc) put_device(&vm_dev->vdev.dev); - } - return rc; -unmap: - iounmap(vm_dev->base); -free_mem: - devm_release_mem_region(&pdev->dev, mem->start, - resource_size(mem)); -free_vmdev: - devm_kfree(&pdev->dev, vm_dev); + return rc; } static int virtio_mmio_remove(struct platform_device *pdev) { struct virtio_mmio_device *vm_dev = platform_get_drvdata(pdev); - struct resource *mem; - - iounmap(vm_dev->base); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem) - devm_release_mem_region(&pdev->dev, mem->start, - resource_size(mem)); unregister_virtio_device(&vm_dev->vdev); return 0; -- cgit v1.2.3-71-gd317 From 338f1d9d1b829fec494d053f62820a2ee625b1ec Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 14 Dec 2017 15:32:28 -0800 Subject: lib/rbtree,drm/mm: add rbtree_replace_node_cached() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a variant of rbtree_replace_node() that maintains the leftmost cache of struct rbtree_root_cached when replacing nodes within the rbtree. As drm_mm is the only rb_replace_node() being used on an interval tree, the mistake looks fairly self-contained. Furthermore the only user of drm_mm_replace_node() is its testsuite... Testcase: igt/drm_mm/replace Link: http://lkml.kernel.org/r/20171122100729.3742-1-chris@chris-wilson.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/20171109212435.9265-1-chris@chris-wilson.co.uk Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection") Signed-off-by: Chris Wilson Reviewed-by: Joonas Lahtinen Acked-by: Davidlohr Bueso Cc: Jérôme Glisse Cc: Joonas Lahtinen Cc: Daniel Vetter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_mm.c | 8 +++++--- include/linux/rbtree.h | 2 ++ lib/rbtree.c | 10 ++++++++++ 3 files changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index 61a1c8ea74bc..c3c79ee6119e 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -575,21 +575,23 @@ EXPORT_SYMBOL(drm_mm_remove_node); */ void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new) { + struct drm_mm *mm = old->mm; + DRM_MM_BUG_ON(!old->allocated); *new = *old; list_replace(&old->node_list, &new->node_list); - rb_replace_node(&old->rb, &new->rb, &old->mm->interval_tree.rb_root); + rb_replace_node_cached(&old->rb, &new->rb, &mm->interval_tree); if (drm_mm_hole_follows(old)) { list_replace(&old->hole_stack, &new->hole_stack); rb_replace_node(&old->rb_hole_size, &new->rb_hole_size, - &old->mm->holes_size); + &mm->holes_size); rb_replace_node(&old->rb_hole_addr, &new->rb_hole_addr, - &old->mm->holes_addr); + &mm->holes_addr); } old->allocated = false; diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h index d574361943ea..fcbeed4053ef 100644 --- a/include/linux/rbtree.h +++ b/include/linux/rbtree.h @@ -99,6 +99,8 @@ extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, struct rb_root *root); extern void rb_replace_node_rcu(struct rb_node *victim, struct rb_node *new, struct rb_root *root); +extern void rb_replace_node_cached(struct rb_node *victim, struct rb_node *new, + struct rb_root_cached *root); static inline void rb_link_node(struct rb_node *node, struct rb_node *parent, struct rb_node **rb_link) diff --git a/lib/rbtree.c b/lib/rbtree.c index ba4a9d165f1b..d3ff682fd4b8 100644 --- a/lib/rbtree.c +++ b/lib/rbtree.c @@ -603,6 +603,16 @@ void rb_replace_node(struct rb_node *victim, struct rb_node *new, } EXPORT_SYMBOL(rb_replace_node); +void rb_replace_node_cached(struct rb_node *victim, struct rb_node *new, + struct rb_root_cached *root) +{ + rb_replace_node(victim, new, &root->rb_root); + + if (root->rb_leftmost == victim) + root->rb_leftmost = new; +} +EXPORT_SYMBOL(rb_replace_node_cached); + void rb_replace_node_rcu(struct rb_node *victim, struct rb_node *new, struct rb_root *root) { -- cgit v1.2.3-71-gd317 From 093b8886f446c9351c4de512cb1d4afe30e37f6f Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 12 Dec 2017 10:23:28 -0800 Subject: scsi: core: Use blist_flags_t consistently Use the type blist_flags_t for all variables that represent blacklist flags. Additionally, suppress recently introduced sparse warnings related to blacklist flags. [mkp: fixed commit id] Fixes: 5ebde4694e3b ("scsi: Use 'blist_flags_t' for scsi_devinfo flags") Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 6 ++---- drivers/scsi/scsi_scan.c | 13 +++++++------ drivers/scsi/scsi_sysfs.c | 5 +++-- drivers/scsi/scsi_transport_spi.c | 12 +++++++----- 4 files changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 449ef5adbb2b..dfb8da83fa50 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -374,10 +374,8 @@ int scsi_dev_info_list_add_keyed(int compatible, char *vendor, char *model, model, compatible); if (strflags) - devinfo->flags = simple_strtoul(strflags, NULL, 0); - else - devinfo->flags = flags; - + flags = (__force blist_flags_t)simple_strtoul(strflags, NULL, 0); + devinfo->flags = flags; devinfo->compatible = compatible; if (compatible) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index be5e919db0e8..0880d975eed3 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -770,7 +770,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized **/ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, - int *bflags, int async) + blist_flags_t *bflags, int async) { int ret; @@ -1049,14 +1049,15 @@ static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq, * - SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized **/ static int scsi_probe_and_add_lun(struct scsi_target *starget, - u64 lun, int *bflagsp, + u64 lun, blist_flags_t *bflagsp, struct scsi_device **sdevp, enum scsi_scan_mode rescan, void *hostdata) { struct scsi_device *sdev; unsigned char *result; - int bflags, res = SCSI_SCAN_NO_RESPONSE, result_len = 256; + blist_flags_t bflags; + int res = SCSI_SCAN_NO_RESPONSE, result_len = 256; struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); /* @@ -1201,7 +1202,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * Modifies sdevscan->lun. **/ static void scsi_sequential_lun_scan(struct scsi_target *starget, - int bflags, int scsi_level, + blist_flags_t bflags, int scsi_level, enum scsi_scan_mode rescan) { uint max_dev_lun; @@ -1292,7 +1293,7 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget, * 0: scan completed (or no memory, so further scanning is futile) * 1: could not scan with REPORT LUN **/ -static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, +static int scsi_report_lun_scan(struct scsi_target *starget, blist_flags_t bflags, enum scsi_scan_mode rescan) { unsigned char scsi_cmd[MAX_COMMAND_SIZE]; @@ -1538,7 +1539,7 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, unsigned int id, u64 lun, enum scsi_scan_mode rescan) { struct Scsi_Host *shost = dev_to_shost(parent); - int bflags = 0; + blist_flags_t bflags = 0; int res; struct scsi_target *starget; diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 50e7d7e4a861..a9996c16f4ae 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -967,7 +967,8 @@ sdev_show_wwid(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(wwid, S_IRUGO, sdev_show_wwid, NULL); -#define BLIST_FLAG_NAME(name) [ilog2(BLIST_##name)] = #name +#define BLIST_FLAG_NAME(name) \ + [ilog2((__force unsigned int)BLIST_##name)] = #name static const char *const sdev_bflags_name[] = { #include "scsi_devinfo_tbl.c" }; @@ -984,7 +985,7 @@ sdev_show_blacklist(struct device *dev, struct device_attribute *attr, for (i = 0; i < sizeof(sdev->sdev_bflags) * BITS_PER_BYTE; i++) { const char *name = NULL; - if (!(sdev->sdev_bflags & BIT(i))) + if (!(sdev->sdev_bflags & (__force blist_flags_t)BIT(i))) continue; if (i < ARRAY_SIZE(sdev_bflags_name) && sdev_bflags_name[i]) name = sdev_bflags_name[i]; diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index d0219e36080c..10ebb213ddb3 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -50,14 +50,14 @@ /* Our blacklist flags */ enum { - SPI_BLIST_NOIUS = 0x1, + SPI_BLIST_NOIUS = (__force blist_flags_t)0x1, }; /* blacklist table, modelled on scsi_devinfo.c */ static struct { char *vendor; char *model; - unsigned flags; + blist_flags_t flags; } spi_static_device_list[] __initdata = { {"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS }, {"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS }, @@ -221,9 +221,11 @@ static int spi_device_configure(struct transport_container *tc, { struct scsi_device *sdev = to_scsi_device(dev); struct scsi_target *starget = sdev->sdev_target; - unsigned bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8], - &sdev->inquiry[16], - SCSI_DEVINFO_SPI); + blist_flags_t bflags; + + bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8], + &sdev->inquiry[16], + SCSI_DEVINFO_SPI); /* Populate the target capability fields with the values * gleaned from the device inquiry */ -- cgit v1.2.3-71-gd317 From 5771cfffdffe709ae9b403b6f80438ca40bf850e Mon Sep 17 00:00:00 2001 From: Prasad B Munirathnam Date: Tue, 12 Dec 2017 11:40:10 -0800 Subject: scsi: aacraid: Fix I/O drop during reset "FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to indicate command timeout. Using the same flag in reset handler causes the command to time out and the I/Os were dropped. Define a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure I/O is properly handled in eh_reset handler. [mkp: tweaked commit message] Signed-off-by: Prasad B Munirathnam Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/aacraid.h | 1 + drivers/scsi/aacraid/linit.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 6e3d81969a77..d52265416da2 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1725,6 +1725,7 @@ struct aac_dev #define FIB_CONTEXT_FLAG_NATIVE_HBA (0x00000010) #define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF (0x00000020) #define FIB_CONTEXT_FLAG_SCSI_CMD (0x00000040) +#define FIB_CONTEXT_FLAG_EH_RESET (0x00000080) /* * Define the command values diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index bdf127aaab41..d55332de08f9 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1037,7 +1037,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd) info = &aac->hba_map[bus][cid]; if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS || info->devtype != AAC_DEVTYPE_NATIVE_RAW) { - fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; + fib->flags |= FIB_CONTEXT_FLAG_EH_RESET; cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; } } -- cgit v1.2.3-71-gd317 From 2610acf46b9ed528ec2cacd717bc9d354e452b73 Mon Sep 17 00:00:00 2001 From: Andreas Platschek Date: Thu, 14 Dec 2017 12:50:51 +0100 Subject: dmaengine: fsl-edma: disable clks on all error paths Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled. To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks. In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Andreas Platschek Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c index 6775f2c74e25..c7568869284e 100644 --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -863,11 +863,11 @@ static void fsl_edma_irq_exit( } } -static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma) +static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks) { int i; - for (i = 0; i < DMAMUX_NR; i++) + for (i = 0; i < nr_clocks; i++) clk_disable_unprepare(fsl_edma->muxclk[i]); } @@ -904,25 +904,25 @@ static int fsl_edma_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i); fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(fsl_edma->muxbase[i])) + if (IS_ERR(fsl_edma->muxbase[i])) { + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); return PTR_ERR(fsl_edma->muxbase[i]); + } sprintf(clkname, "dmamux%d", i); fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname); if (IS_ERR(fsl_edma->muxclk[i])) { dev_err(&pdev->dev, "Missing DMAMUX block clock.\n"); + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); return PTR_ERR(fsl_edma->muxclk[i]); } ret = clk_prepare_enable(fsl_edma->muxclk[i]); - if (ret) { - /* disable only clks which were enabled on error */ - for (; i >= 0; i--) - clk_disable_unprepare(fsl_edma->muxclk[i]); - - dev_err(&pdev->dev, "DMAMUX clk block failed.\n"); - return ret; - } + if (ret) + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); } @@ -976,7 +976,7 @@ static int fsl_edma_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "Can't register Freescale eDMA engine. (%d)\n", ret); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return ret; } @@ -985,7 +985,7 @@ static int fsl_edma_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Can't register Freescale eDMA of_dma. (%d)\n", ret); dma_async_device_unregister(&fsl_edma->dma_dev); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return ret; } @@ -1015,7 +1015,7 @@ static int fsl_edma_remove(struct platform_device *pdev) fsl_edma_cleanup_vchan(&fsl_edma->dma_dev); of_dma_controller_free(np); dma_async_device_unregister(&fsl_edma->dma_dev); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return 0; } -- cgit v1.2.3-71-gd317 From 08933099e6404f588f81c2050bfec7313e06eeaf Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Thu, 14 Dec 2017 16:54:45 +0100 Subject: USB: serial: option: add support for Telit ME910 PID 0x1101 This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3b3513874cfd..b02fb576b856 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -280,6 +280,7 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 #define TELIT_PRODUCT_ME910 0x1100 +#define TELIT_PRODUCT_ME910_DUAL_MODEM 0x1101 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 @@ -645,6 +646,11 @@ static const struct option_blacklist_info telit_me910_blacklist = { .reserved = BIT(1) | BIT(3), }; +static const struct option_blacklist_info telit_me910_dual_modem_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(3), +}; + static const struct option_blacklist_info telit_le910_blacklist = { .sendsetup = BIT(0), .reserved = BIT(1) | BIT(2), @@ -1244,6 +1250,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = (kernel_ulong_t)&telit_me910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), + .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), -- cgit v1.2.3-71-gd317 From 92a18a657fb2e2ffbfa0659af32cc18fd2346516 Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Fri, 15 Dec 2017 00:39:27 +0100 Subject: USB: serial: qcserial: add Sierra Wireless EM7565 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by: Reinhard Speyerer Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e3892541a489..613f91add03d 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */ {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ + {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ + {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ @@ -342,6 +344,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) break; case 2: dev_dbg(dev, "NMEA GPS interface found\n"); + sendsetup = true; break; case 3: dev_dbg(dev, "Modem port found\n"); -- cgit v1.2.3-71-gd317 From 046046737bd35bed047460f080ea47e186be731e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 15 Nov 2017 10:43:16 +0100 Subject: phy: tegra: fix device-tree node lookups Fix child-node lookups during probe, which ended up searching the whole device tree depth-first starting at the parents rather than just matching on their children. To make things worse, some parent nodes could end up being being prematurely freed (by tegra_xusb_pad_register()) as of_find_node_by_name() drops a reference to its first argument. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Cc: stable # 4.7 Cc: Thierry Reding Signed-off-by: Johan Hovold Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/tegra/xusb.c | 58 ++++++++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 4307bf0013e1..63e916d4d069 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -75,14 +75,14 @@ MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match); static struct device_node * tegra_xusb_find_pad_node(struct tegra_xusb_padctl *padctl, const char *name) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(padctl->dev->of_node); + struct device_node *pads, *np; + + pads = of_get_child_by_name(padctl->dev->of_node, "pads"); + if (!pads) + return NULL; - np = of_find_node_by_name(np, "pads"); - if (np) - np = of_find_node_by_name(np, name); + np = of_get_child_by_name(pads, name); + of_node_put(pads); return np; } @@ -90,16 +90,16 @@ tegra_xusb_find_pad_node(struct tegra_xusb_padctl *padctl, const char *name) static struct device_node * tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(pad->dev.of_node); + struct device_node *np, *lanes; - np = of_find_node_by_name(np, "lanes"); - if (!np) + lanes = of_get_child_by_name(pad->dev.of_node, "lanes"); + if (!lanes) return NULL; - return of_find_node_by_name(np, pad->soc->lanes[index].name); + np = of_get_child_by_name(lanes, pad->soc->lanes[index].name); + of_node_put(lanes); + + return np; } static int @@ -195,7 +195,7 @@ int tegra_xusb_pad_register(struct tegra_xusb_pad *pad, unsigned int i; int err; - children = of_find_node_by_name(pad->dev.of_node, "lanes"); + children = of_get_child_by_name(pad->dev.of_node, "lanes"); if (!children) return -ENODEV; @@ -444,21 +444,21 @@ static struct device_node * tegra_xusb_find_port_node(struct tegra_xusb_padctl *padctl, const char *type, unsigned int index) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(padctl->dev->of_node); + struct device_node *ports, *np; + char *name; - np = of_find_node_by_name(np, "ports"); - if (np) { - char *name; + ports = of_get_child_by_name(padctl->dev->of_node, "ports"); + if (!ports) + return NULL; - name = kasprintf(GFP_KERNEL, "%s-%u", type, index); - if (!name) - return ERR_PTR(-ENOMEM); - np = of_find_node_by_name(np, name); - kfree(name); + name = kasprintf(GFP_KERNEL, "%s-%u", type, index); + if (!name) { + of_node_put(ports); + return ERR_PTR(-ENOMEM); } + np = of_get_child_by_name(ports, name); + kfree(name); + of_node_put(ports); return np; } @@ -847,7 +847,7 @@ static void tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl) static int tegra_xusb_padctl_probe(struct platform_device *pdev) { - struct device_node *np = of_node_get(pdev->dev.of_node); + struct device_node *np = pdev->dev.of_node; const struct tegra_xusb_padctl_soc *soc; struct tegra_xusb_padctl *padctl; const struct of_device_id *match; @@ -855,7 +855,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) int err; /* for backwards compatibility with old device trees */ - np = of_find_node_by_name(np, "pads"); + np = of_get_child_by_name(np, "pads"); if (!np) { dev_warn(&pdev->dev, "deprecated DT, using legacy driver\n"); return tegra_xusb_padctl_legacy_probe(pdev); -- cgit v1.2.3-71-gd317 From e796cc6a3a9186c92092e2f5929cf8f65b56cf01 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Fri, 17 Nov 2017 16:55:35 +0530 Subject: phy: cpcap-usb: Fix platform_get_irq_byname's error checking. The platform_get_irq_byname() function returns negative if an error occurs. zero or positive number on success. platform_get_irq_byname() error checking for zero is not correct. Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Arvind Yadav Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/motorola/phy-cpcap-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c index accaaaccb662..6601ad0dfb3a 100644 --- a/drivers/phy/motorola/phy-cpcap-usb.c +++ b/drivers/phy/motorola/phy-cpcap-usb.c @@ -310,7 +310,7 @@ static int cpcap_usb_init_irq(struct platform_device *pdev, int irq, error; irq = platform_get_irq_byname(pdev, name); - if (!irq) + if (irq < 0) return -ENODEV; error = devm_request_threaded_irq(ddata->dev, irq, NULL, -- cgit v1.2.3-71-gd317 From 3cb0ab6e008f2a9ffe2d1be4246984003caed7e2 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Thu, 8 Sep 2016 10:38:11 -0700 Subject: phy: rockchip-typec: add pm_runtime_disable in err case Add pm_runtime_disable in err case to make the pm_runtime_enable/disable is invoked balanced. Signed-off-by: Chris Zhong Reviewed-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/rockchip/phy-rockchip-typec.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index ee85fa0ca4b0..7492c8978217 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -1137,6 +1137,7 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) if (IS_ERR(phy)) { dev_err(dev, "failed to create phy: %s\n", child_np->name); + pm_runtime_disable(dev); return PTR_ERR(phy); } @@ -1146,6 +1147,7 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { dev_err(dev, "Failed to register phy provider\n"); + pm_runtime_disable(dev); return PTR_ERR(phy_provider); } -- cgit v1.2.3-71-gd317 From 2b88212c4cc67ff33dec5bb4d690044b97a5f979 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 Nov 2017 12:56:36 +0100 Subject: phy: rcar-gen3-usb2: select USB_COMMON When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/renesas/phy-rcar-gen3-usb2.o: In function `rcar_gen3_phy_usb2_probe': phy-rcar-gen3-usb2.c:(.text+0x250): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 7e0540f41332 ("phy: rcar-gen3-usb2: check dr_mode for otg mode") Signed-off-by: Arnd Bergmann Acked-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/renesas/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig index cb09245e9b4c..c845facacb06 100644 --- a/drivers/phy/renesas/Kconfig +++ b/drivers/phy/renesas/Kconfig @@ -12,7 +12,9 @@ config PHY_RCAR_GEN3_USB2 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" depends on ARCH_RENESAS depends on EXTCON + depends on USB_SUPPORT select GENERIC_PHY + select USB_COMMON help Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. -- cgit v1.2.3-71-gd317 From b224f6134d72e3493a023b5bea917f9a6beea0c8 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Fri, 24 Nov 2017 16:30:53 +0100 Subject: nvme: set discard_alignment to zero Similar to 7c084289795b ("rbd: set discard_alignment to zero"), NVMe devices are currently incorrectly initialised with the block queue discard_alignment set to the NVMe stream alignment. As per Documentation/ABI/testing/sysfs-block: The discard_alignment parameter indicates how many bytes the beginning of the device is offset from the internal allocation unit's natural alignment. Correcting the discard_alignment parameter to zero has no effect on how discard requests are propagated through the block layer - @alignment in __blkdev_issue_discard() remains zero. However, it does fix other consumers, such as LIO's Block Limits VPD response. Signed-off-by: David Disseldorp Reviewed-by: Jens Axboe Reviewed-by: Martin K. Petersen Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index f837d666cbd4..67f2f94cf86e 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1287,7 +1287,7 @@ static void nvme_config_discard(struct nvme_ctrl *ctrl, BUILD_BUG_ON(PAGE_SIZE / sizeof(struct nvme_dsm_range) < NVME_DSM_MAX_RANGES); - queue->limits.discard_alignment = size; + queue->limits.discard_alignment = 0; queue->limits.discard_granularity = size; blk_queue_max_discard_sectors(queue, UINT_MAX); -- cgit v1.2.3-71-gd317 From 4596e752db02d47038cd7c965419789ab15d1985 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 29 Nov 2017 15:11:37 -0800 Subject: nvme-fc: remove double put reference if admin connect fails There are two put references in the failure case of initial create_association. The first put actually frees the controller, thus the second put references freed memory. Remove the unnecessary 2nd put. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 0a8af4daef89..794e66e4aa20 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -3221,7 +3221,6 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, /* initiate nvme ctrl ref counting teardown */ nvme_uninit_ctrl(&ctrl->ctrl); - nvme_put_ctrl(&ctrl->ctrl); /* Remove core ctrl ref. */ nvme_put_ctrl(&ctrl->ctrl); -- cgit v1.2.3-71-gd317 From bd9f5d65769b9fe5e72110d4cbc9097b53b01613 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 6 Dec 2017 18:30:09 +0800 Subject: nvme: call blk_integrity_unregister after queue is cleaned up During IO complete path, bio_integrity_advance() is often called, and blk_get_integrity() is called in this function. But in blk_integrity_unregister, the buffer pointed by queue->integrity is cleared, and blk_integrity->profile becomes NULL, then blk_get_integrity returns NULL, and causes kernel oops[1] finally. This patch fixes this issue by calling blk_integrity_unregister() after blk_cleanup_queue(). [1] kernel oops log [ 122.068007] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 122.076760] IP: bio_integrity_advance+0x3d/0xf0 [ 122.081815] PGD 0 P4D 0 [ 122.084641] Oops: 0000 [#1] SMP [ 122.088142] Modules linked in: sunrpc ipmi_ssif intel_rapl vfat fat x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass mei_me ipmi_si crct10dif_pclmul crc32_pclmul sg mei ghash_clmulni_intel mxm_wmi ipmi_devintf iTCO_wdt intel_cstate intel_uncore pcspkr intel_rapl_perf iTCO_vendor_support dcdbas ipmi_msghandler lpc_ich acpi_power_meter shpchp wmi dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ahci nvme tg3 libahci nvme_core i2c_core libata ptp megaraid_sas pps_core dm_mirror dm_region_hash dm_log dm_mod [ 122.149577] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.0-11.el7a.x86_64 #1 [ 122.157635] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017 [ 122.166179] task: ffff8802ff1e8000 task.stack: ffffc90000130000 [ 122.172785] RIP: 0010:bio_integrity_advance+0x3d/0xf0 [ 122.178419] RSP: 0018:ffff88047fc03d70 EFLAGS: 00010006 [ 122.184248] RAX: ffff880473b08000 RBX: ffff880458c71a80 RCX: ffff880473b08248 [ 122.192209] RDX: 0000000000000000 RSI: 000000000000003c RDI: ffffc900038d7ba0 [ 122.200171] RBP: ffff88047fc03d78 R08: 0000000000000001 R09: ffffffffa01a78b5 [ 122.208132] R10: ffff88047fc1eda0 R11: ffff880458c71ad0 R12: 0000000000007800 [ 122.216094] R13: 0000000000000000 R14: 0000000000007800 R15: ffff880473a39b40 [ 122.224056] FS: 0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000 [ 122.233083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 122.239494] CR2: 000000000000000a CR3: 0000000001c09002 CR4: 00000000001606e0 [ 122.247455] Call Trace: [ 122.250183] [ 122.252429] bio_advance+0x28/0xf0 [ 122.256217] blk_update_request+0xa1/0x310 [ 122.260778] blk_mq_end_request+0x1e/0x70 [ 122.265256] nvme_complete_rq+0x1c/0xd0 [nvme_core] [ 122.270699] nvme_pci_complete_rq+0x85/0x130 [nvme] [ 122.276140] __blk_mq_complete_request+0x8d/0x140 [ 122.281387] blk_mq_complete_request+0x16/0x20 [ 122.286345] nvme_process_cq+0xdd/0x1c0 [nvme] [ 122.291301] nvme_irq+0x23/0x50 [nvme] [ 122.295485] __handle_irq_event_percpu+0x3c/0x190 [ 122.300725] handle_irq_event_percpu+0x32/0x80 [ 122.305683] handle_irq_event+0x3b/0x60 [ 122.309964] handle_edge_irq+0x8f/0x190 [ 122.314247] handle_irq+0xab/0x120 [ 122.318043] do_IRQ+0x48/0xd0 [ 122.321355] common_interrupt+0x9d/0x9d [ 122.325625] [ 122.327967] RIP: 0010:cpuidle_enter_state+0xe9/0x280 [ 122.333504] RSP: 0018:ffffc90000133e68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff35 [ 122.341952] RAX: ffff88047fc1b900 RBX: ffff88047fc24400 RCX: 000000000000001f [ 122.349913] RDX: 0000000000000000 RSI: fffffcf2e6007295 RDI: 0000000000000000 [ 122.357874] RBP: ffffc90000133ea0 R08: 000000000000062e R09: 0000000000000253 [ 122.365836] R10: 0000000000000225 R11: 0000000000000018 R12: 0000000000000002 [ 122.373797] R13: 0000000000000001 R14: ffff88047fc24400 R15: 0000001c6bd1d263 [ 122.381762] ? cpuidle_enter_state+0xc5/0x280 [ 122.386623] cpuidle_enter+0x17/0x20 [ 122.390611] call_cpuidle+0x23/0x40 [ 122.394501] do_idle+0x17e/0x1f0 [ 122.398101] cpu_startup_entry+0x73/0x80 [ 122.402478] start_secondary+0x178/0x1c0 [ 122.406854] secondary_startup_64+0xa5/0xa5 [ 122.411520] Code: 48 8b 5f 68 48 8b 47 08 31 d2 4c 8b 5b 48 48 8b 80 d0 03 00 00 48 83 b8 48 02 00 00 00 48 8d 88 48 02 00 00 48 0f 45 d1 c1 ee 09 <0f> b6 4a 0a 0f b6 52 09 89 f0 48 01 73 08 83 e9 09 d3 e8 0f af [ 122.432604] RIP: bio_integrity_advance+0x3d/0xf0 RSP: ffff88047fc03d70 [ 122.439888] CR2: 000000000000000a Reported-by: Zhang Yi Tested-by: Zhang Yi Signed-off-by: Ming Lei Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 67f2f94cf86e..2cc6192ef275 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2965,8 +2965,6 @@ static void nvme_ns_remove(struct nvme_ns *ns) return; if (ns->disk && ns->disk->flags & GENHD_FL_UP) { - if (blk_get_integrity(ns->disk)) - blk_integrity_unregister(ns->disk); nvme_mpath_remove_disk_links(ns); sysfs_remove_group(&disk_to_dev(ns->disk)->kobj, &nvme_ns_id_attr_group); @@ -2974,6 +2972,8 @@ static void nvme_ns_remove(struct nvme_ns *ns) nvme_nvm_unregister_sysfs(ns); del_gendisk(ns->disk); blk_cleanup_queue(ns->queue); + if (blk_get_integrity(ns->disk)) + blk_integrity_unregister(ns->disk); } mutex_lock(&ns->ctrl->subsys->lock); -- cgit v1.2.3-71-gd317 From 249159c5f15812140fa216f9997d799ac0023a1f Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 14 Dec 2017 11:20:14 -0700 Subject: nvme: check hw sectors before setting chunk sectors Some devices with IDs matching the "stripe" quirk don't actually have this quirk, and don't have an MDTS value. When MDTS is not set, the driver sets the max sectors to UINT_MAX, which is not a power of 2, hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting chunk sectors for such devices. Signed-off-by: Keith Busch Reviewed-by: Martin K. Petersen Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 2cc6192ef275..eab812dd2429 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1705,7 +1705,8 @@ static void nvme_set_queue_limits(struct nvme_ctrl *ctrl, blk_queue_max_hw_sectors(q, ctrl->max_hw_sectors); blk_queue_max_segments(q, min_t(u32, max_segments, USHRT_MAX)); } - if (ctrl->quirks & NVME_QUIRK_STRIPE_SIZE) + if ((ctrl->quirks & NVME_QUIRK_STRIPE_SIZE) && + is_power_of_2(ctrl->max_hw_sectors)) blk_queue_chunk_sectors(q, ctrl->max_hw_sectors); blk_queue_virt_boundary(q, ctrl->page_size - 1); if (ctrl->vwc & NVME_CTRL_VWC_PRESENT) -- cgit v1.2.3-71-gd317 From 654b4a4acd8b52a4272114b95896e9a10d382cde Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 14 Dec 2017 11:20:32 -0700 Subject: nvme: setup streams after initializing namespace head Fixes a NULL pointer dereference. Reported-by: Arnav Dawn Signed-off-by: Keith Busch Reviewed-by: Martin K. Petersen Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index eab812dd2429..1e46e60b8f10 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2870,7 +2870,6 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid) blk_queue_logical_block_size(ns->queue, 1 << ns->lba_shift); nvme_set_queue_limits(ctrl, ns->queue); - nvme_setup_streams_ns(ctrl, ns); id = nvme_identify_ns(ctrl, nsid); if (!id) @@ -2881,6 +2880,7 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid) if (nvme_init_ns_head(ns, nsid, id, &new)) goto out_free_id; + nvme_setup_streams_ns(ctrl, ns); #ifdef CONFIG_NVME_MULTIPATH /* -- cgit v1.2.3-71-gd317 From fccff0862838908d21eaf956d57e09c6c189f7c5 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Fri, 15 Dec 2017 08:44:21 +0100 Subject: mlxsw: spectrum: Disable MAC learning for ovs port Learning is currently enabled for ports which are OVS slaves - even though OVS doesn't need this indication. Since we're not associating a fid with the port, HW would continuously notify driver of learned [& aged] MACs which would be logged as errors. Fixes: 2b94e58df58c ("mlxsw: spectrum: Allow ports to work under OVS master") Signed-off-by: Yuval Mintz Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 2d0897b7d860..9bd8d28de152 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -4300,6 +4300,7 @@ static int mlxsw_sp_port_stp_set(struct mlxsw_sp_port *mlxsw_sp_port, static int mlxsw_sp_port_ovs_join(struct mlxsw_sp_port *mlxsw_sp_port) { + u16 vid = 1; int err; err = mlxsw_sp_port_vp_mode_set(mlxsw_sp_port, true); @@ -4312,8 +4313,19 @@ static int mlxsw_sp_port_ovs_join(struct mlxsw_sp_port *mlxsw_sp_port) true, false); if (err) goto err_port_vlan_set; + + for (; vid <= VLAN_N_VID - 1; vid++) { + err = mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, + vid, false); + if (err) + goto err_vid_learning_set; + } + return 0; +err_vid_learning_set: + for (vid--; vid >= 1; vid--) + mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, vid, true); err_port_vlan_set: mlxsw_sp_port_stp_set(mlxsw_sp_port, false); err_port_stp_set: @@ -4323,6 +4335,12 @@ err_port_stp_set: static void mlxsw_sp_port_ovs_leave(struct mlxsw_sp_port *mlxsw_sp_port) { + u16 vid; + + for (vid = VLAN_N_VID - 1; vid >= 1; vid--) + mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, + vid, true); + mlxsw_sp_port_vlan_set(mlxsw_sp_port, 2, VLAN_N_VID - 1, false, false); mlxsw_sp_port_stp_set(mlxsw_sp_port, false); -- cgit v1.2.3-71-gd317 From 7fbd9493f0eeae8cef58300505a9ef5c8fce6313 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 13 Dec 2017 18:56:29 +0100 Subject: s390/qeth: apply takeover changes when mode is toggled Just as for an explicit enable/disable, toggling the takeover mode also requires that the IP addresses get updated. Otherwise all IPs that were added to the table before the mode-toggle, get registered with the old settings. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 2 +- drivers/s390/net/qeth_core_main.c | 2 +- drivers/s390/net/qeth_l3_sys.c | 35 +++++++++++++++++------------------ 3 files changed, 19 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 15015a24f8ad..51c618d9fefe 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -565,7 +565,7 @@ enum qeth_cq { }; struct qeth_ipato { - int enabled; + bool enabled; int invert4; int invert6; struct list_head entries; diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 430e3214f7e2..8d18675e60e2 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1480,7 +1480,7 @@ static int qeth_setup_card(struct qeth_card *card) qeth_set_intial_options(card); /* IP address takeover */ INIT_LIST_HEAD(&card->ipato.entries); - card->ipato.enabled = 0; + card->ipato.enabled = false; card->ipato.invert4 = 0; card->ipato.invert6 = 0; /* init QDIO stuff */ diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index bd12fdf678be..198717f71b3d 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -372,6 +372,7 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, struct qeth_card *card = dev_get_drvdata(dev); struct qeth_ipaddr *addr; int i, rc = 0; + bool enable; if (!card) return -EINVAL; @@ -384,25 +385,23 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, } if (sysfs_streq(buf, "toggle")) { - card->ipato.enabled = (card->ipato.enabled)? 0 : 1; - } else if (sysfs_streq(buf, "1")) { - card->ipato.enabled = 1; - hash_for_each(card->ip_htable, i, addr, hnode) { - if ((addr->type == QETH_IP_TYPE_NORMAL) && - qeth_l3_is_addr_covered_by_ipato(card, addr)) - addr->set_flags |= - QETH_IPA_SETIP_TAKEOVER_FLAG; - } - } else if (sysfs_streq(buf, "0")) { - card->ipato.enabled = 0; - hash_for_each(card->ip_htable, i, addr, hnode) { - if (addr->set_flags & - QETH_IPA_SETIP_TAKEOVER_FLAG) - addr->set_flags &= - ~QETH_IPA_SETIP_TAKEOVER_FLAG; - } - } else + enable = !card->ipato.enabled; + } else if (kstrtobool(buf, &enable)) { rc = -EINVAL; + goto out; + } + + if (card->ipato.enabled == enable) + goto out; + card->ipato.enabled = enable; + + hash_for_each(card->ip_htable, i, addr, hnode) { + if (!enable) + addr->set_flags &= ~QETH_IPA_SETIP_TAKEOVER_FLAG; + else if (addr->type == QETH_IP_TYPE_NORMAL && + qeth_l3_is_addr_covered_by_ipato(card, addr)) + addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; + } out: mutex_unlock(&card->conf_mutex); return rc ? rc : count; -- cgit v1.2.3-71-gd317 From b22d73d6689fd902a66c08ebe71ab2f3b351e22f Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 13 Dec 2017 18:56:30 +0100 Subject: s390/qeth: don't apply takeover changes to RXIP When takeover is switched off, current code clears the 'TAKEOVER' flag on all IPs. But the flag is also used for RXIP addresses, and those should not be affected by the takeover mode. Fix the behaviour by consistenly applying takover logic to NORMAL addresses only. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 5 +++-- drivers/s390/net/qeth_l3_sys.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 6a73894b0cb5..4a4be81800eb 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -174,6 +174,8 @@ int qeth_l3_is_addr_covered_by_ipato(struct qeth_card *card, if (!card->ipato.enabled) return 0; + if (addr->type != QETH_IP_TYPE_NORMAL) + return 0; qeth_l3_convert_addr_to_bits((u8 *) &addr->u, addr_bits, (addr->proto == QETH_PROT_IPV4)? 4:16); @@ -290,8 +292,7 @@ int qeth_l3_add_ip(struct qeth_card *card, struct qeth_ipaddr *tmp_addr) memcpy(addr, tmp_addr, sizeof(struct qeth_ipaddr)); addr->ref_counter = 1; - if (addr->type == QETH_IP_TYPE_NORMAL && - qeth_l3_is_addr_covered_by_ipato(card, addr)) { + if (qeth_l3_is_addr_covered_by_ipato(card, addr)) { QETH_CARD_TEXT(card, 2, "tkovaddr"); addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; } diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 198717f71b3d..e256928092e5 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -396,10 +396,11 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, card->ipato.enabled = enable; hash_for_each(card->ip_htable, i, addr, hnode) { + if (addr->type != QETH_IP_TYPE_NORMAL) + continue; if (!enable) addr->set_flags &= ~QETH_IPA_SETIP_TAKEOVER_FLAG; - else if (addr->type == QETH_IP_TYPE_NORMAL && - qeth_l3_is_addr_covered_by_ipato(card, addr)) + else if (qeth_l3_is_addr_covered_by_ipato(card, addr)) addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; } out: -- cgit v1.2.3-71-gd317 From 8a03a3692b100d84785ee7a834e9215e304c9e00 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 13 Dec 2017 18:56:31 +0100 Subject: s390/qeth: lock IP table while applying takeover changes Modifying the flags of an IP addr object needs to be protected against eg. concurrent removal of the same object from the IP table. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_sys.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index e256928092e5..aa676b4090da 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -395,6 +395,7 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, goto out; card->ipato.enabled = enable; + spin_lock_bh(&card->ip_lock); hash_for_each(card->ip_htable, i, addr, hnode) { if (addr->type != QETH_IP_TYPE_NORMAL) continue; @@ -403,6 +404,7 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, else if (qeth_l3_is_addr_covered_by_ipato(card, addr)) addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; } + spin_unlock_bh(&card->ip_lock); out: mutex_unlock(&card->conf_mutex); return rc ? rc : count; -- cgit v1.2.3-71-gd317 From 02f510f326501470348a5df341e8232c3497bbbb Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 13 Dec 2017 18:56:32 +0100 Subject: s390/qeth: update takeover IPs after configuration change Any modification to the takeover IP-ranges requires that we re-evaluate which IP addresses are takeover-eligible. Otherwise we might do takeover for some addresses when we no longer should, or vice-versa. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 4 +-- drivers/s390/net/qeth_core_main.c | 4 +-- drivers/s390/net/qeth_l3.h | 2 +- drivers/s390/net/qeth_l3_main.c | 31 +++++++++++++++++-- drivers/s390/net/qeth_l3_sys.c | 63 +++++++++++++++++++++------------------ 5 files changed, 67 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 51c618d9fefe..badf42acbf95 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -566,8 +566,8 @@ enum qeth_cq { struct qeth_ipato { bool enabled; - int invert4; - int invert6; + bool invert4; + bool invert6; struct list_head entries; }; diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 8d18675e60e2..6c815207f4f5 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1481,8 +1481,8 @@ static int qeth_setup_card(struct qeth_card *card) /* IP address takeover */ INIT_LIST_HEAD(&card->ipato.entries); card->ipato.enabled = false; - card->ipato.invert4 = 0; - card->ipato.invert6 = 0; + card->ipato.invert4 = false; + card->ipato.invert6 = false; /* init QDIO stuff */ qeth_init_qdio_info(card); INIT_DELAYED_WORK(&card->buffer_reclaim_work, qeth_buffer_reclaim_work); diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h index 194ae9b577cc..e5833837b799 100644 --- a/drivers/s390/net/qeth_l3.h +++ b/drivers/s390/net/qeth_l3.h @@ -82,7 +82,7 @@ void qeth_l3_del_vipa(struct qeth_card *, enum qeth_prot_versions, const u8 *); int qeth_l3_add_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *); void qeth_l3_del_rxip(struct qeth_card *card, enum qeth_prot_versions, const u8 *); -int qeth_l3_is_addr_covered_by_ipato(struct qeth_card *, struct qeth_ipaddr *); +void qeth_l3_update_ipato(struct qeth_card *card); struct qeth_ipaddr *qeth_l3_get_addr_buffer(enum qeth_prot_versions); int qeth_l3_add_ip(struct qeth_card *, struct qeth_ipaddr *); int qeth_l3_delete_ip(struct qeth_card *, struct qeth_ipaddr *); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 4a4be81800eb..ef0961e18686 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -164,8 +164,8 @@ static void qeth_l3_convert_addr_to_bits(u8 *addr, u8 *bits, int len) } } -int qeth_l3_is_addr_covered_by_ipato(struct qeth_card *card, - struct qeth_ipaddr *addr) +static bool qeth_l3_is_addr_covered_by_ipato(struct qeth_card *card, + struct qeth_ipaddr *addr) { struct qeth_ipato_entry *ipatoe; u8 addr_bits[128] = {0, }; @@ -606,6 +606,27 @@ int qeth_l3_setrouting_v6(struct qeth_card *card) /* * IP address takeover related functions */ + +/** + * qeth_l3_update_ipato() - Update 'takeover' property, for all NORMAL IPs. + * + * Caller must hold ip_lock. + */ +void qeth_l3_update_ipato(struct qeth_card *card) +{ + struct qeth_ipaddr *addr; + unsigned int i; + + hash_for_each(card->ip_htable, i, addr, hnode) { + if (addr->type != QETH_IP_TYPE_NORMAL) + continue; + if (qeth_l3_is_addr_covered_by_ipato(card, addr)) + addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; + else + addr->set_flags &= ~QETH_IPA_SETIP_TAKEOVER_FLAG; + } +} + static void qeth_l3_clear_ipato_list(struct qeth_card *card) { struct qeth_ipato_entry *ipatoe, *tmp; @@ -617,6 +638,7 @@ static void qeth_l3_clear_ipato_list(struct qeth_card *card) kfree(ipatoe); } + qeth_l3_update_ipato(card); spin_unlock_bh(&card->ip_lock); } @@ -641,8 +663,10 @@ int qeth_l3_add_ipato_entry(struct qeth_card *card, } } - if (!rc) + if (!rc) { list_add_tail(&new->entry, &card->ipato.entries); + qeth_l3_update_ipato(card); + } spin_unlock_bh(&card->ip_lock); @@ -665,6 +689,7 @@ void qeth_l3_del_ipato_entry(struct qeth_card *card, (proto == QETH_PROT_IPV4)? 4:16) && (ipatoe->mask_bits == mask_bits)) { list_del(&ipatoe->entry); + qeth_l3_update_ipato(card); kfree(ipatoe); } } diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index aa676b4090da..6ea2b528a64e 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -370,9 +370,8 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct qeth_card *card = dev_get_drvdata(dev); - struct qeth_ipaddr *addr; - int i, rc = 0; bool enable; + int rc = 0; if (!card) return -EINVAL; @@ -391,20 +390,12 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, goto out; } - if (card->ipato.enabled == enable) - goto out; - card->ipato.enabled = enable; - - spin_lock_bh(&card->ip_lock); - hash_for_each(card->ip_htable, i, addr, hnode) { - if (addr->type != QETH_IP_TYPE_NORMAL) - continue; - if (!enable) - addr->set_flags &= ~QETH_IPA_SETIP_TAKEOVER_FLAG; - else if (qeth_l3_is_addr_covered_by_ipato(card, addr)) - addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; + if (card->ipato.enabled != enable) { + card->ipato.enabled = enable; + spin_lock_bh(&card->ip_lock); + qeth_l3_update_ipato(card); + spin_unlock_bh(&card->ip_lock); } - spin_unlock_bh(&card->ip_lock); out: mutex_unlock(&card->conf_mutex); return rc ? rc : count; @@ -430,20 +421,27 @@ static ssize_t qeth_l3_dev_ipato_invert4_store(struct device *dev, const char *buf, size_t count) { struct qeth_card *card = dev_get_drvdata(dev); + bool invert; int rc = 0; if (!card) return -EINVAL; mutex_lock(&card->conf_mutex); - if (sysfs_streq(buf, "toggle")) - card->ipato.invert4 = (card->ipato.invert4)? 0 : 1; - else if (sysfs_streq(buf, "1")) - card->ipato.invert4 = 1; - else if (sysfs_streq(buf, "0")) - card->ipato.invert4 = 0; - else + if (sysfs_streq(buf, "toggle")) { + invert = !card->ipato.invert4; + } else if (kstrtobool(buf, &invert)) { rc = -EINVAL; + goto out; + } + + if (card->ipato.invert4 != invert) { + card->ipato.invert4 = invert; + spin_lock_bh(&card->ip_lock); + qeth_l3_update_ipato(card); + spin_unlock_bh(&card->ip_lock); + } +out: mutex_unlock(&card->conf_mutex); return rc ? rc : count; } @@ -609,20 +607,27 @@ static ssize_t qeth_l3_dev_ipato_invert6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct qeth_card *card = dev_get_drvdata(dev); + bool invert; int rc = 0; if (!card) return -EINVAL; mutex_lock(&card->conf_mutex); - if (sysfs_streq(buf, "toggle")) - card->ipato.invert6 = (card->ipato.invert6)? 0 : 1; - else if (sysfs_streq(buf, "1")) - card->ipato.invert6 = 1; - else if (sysfs_streq(buf, "0")) - card->ipato.invert6 = 0; - else + if (sysfs_streq(buf, "toggle")) { + invert = !card->ipato.invert6; + } else if (kstrtobool(buf, &invert)) { rc = -EINVAL; + goto out; + } + + if (card->ipato.invert6 != invert) { + card->ipato.invert6 = invert; + spin_lock_bh(&card->ip_lock); + qeth_l3_update_ipato(card); + spin_unlock_bh(&card->ip_lock); + } +out: mutex_unlock(&card->conf_mutex); return rc ? rc : count; } -- cgit v1.2.3-71-gd317 From e4d02ca04c6d48ab2226342a1c4ed54f1dbb72bd Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:40 +0300 Subject: net: aquantia: Fix actual speed capabilities reporting Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 4 +++- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 7 ++++--- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 5 +++-- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 13 ++++++++++++- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 13 ++++++++++++- 6 files changed, 35 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index 0207927dc8a6..4ebd53b3c7da 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -85,7 +85,9 @@ struct aq_hw_ops { void (*destroy)(struct aq_hw_s *self); int (*get_hw_caps)(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps); + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device); int (*hw_ring_tx_xmit)(struct aq_hw_s *self, struct aq_ring_s *aq_ring, unsigned int frags); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 78dfb2ab78ce..a360ccc298b9 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -222,7 +222,7 @@ static struct net_device *aq_nic_ndev_alloc(void) struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, const struct ethtool_ops *et_ops, - struct device *dev, + struct pci_dev *pdev, struct aq_pci_func_s *aq_pci_func, unsigned int port, const struct aq_hw_ops *aq_hw_ops) @@ -242,7 +242,7 @@ struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, ndev->netdev_ops = ndev_ops; ndev->ethtool_ops = et_ops; - SET_NETDEV_DEV(ndev, dev); + SET_NETDEV_DEV(ndev, &pdev->dev); ndev->if_port = port; self->ndev = ndev; @@ -254,7 +254,8 @@ struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, self->aq_hw = self->aq_hw_ops.create(aq_pci_func, self->port, &self->aq_hw_ops); - err = self->aq_hw_ops.get_hw_caps(self->aq_hw, &self->aq_hw_caps); + err = self->aq_hw_ops.get_hw_caps(self->aq_hw, &self->aq_hw_caps, + pdev->device, pdev->subsystem_device); if (err < 0) goto err_exit; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index 4309983acdd6..3c9f8db03d5f 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -71,7 +71,7 @@ struct aq_nic_cfg_s { struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, const struct ethtool_ops *et_ops, - struct device *dev, + struct pci_dev *pdev, struct aq_pci_func_s *aq_pci_func, unsigned int port, const struct aq_hw_ops *aq_hw_ops); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c index cadaa646c89f..58c29d04b186 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c @@ -51,7 +51,8 @@ struct aq_pci_func_s *aq_pci_func_alloc(struct aq_hw_ops *aq_hw_ops, pci_set_drvdata(pdev, self); self->pdev = pdev; - err = aq_hw_ops->get_hw_caps(NULL, &self->aq_hw_caps); + err = aq_hw_ops->get_hw_caps(NULL, &self->aq_hw_caps, pdev->device, + pdev->subsystem_device); if (err < 0) goto err_exit; @@ -59,7 +60,7 @@ struct aq_pci_func_s *aq_pci_func_alloc(struct aq_hw_ops *aq_hw_ops, for (port = 0; port < self->ports; ++port) { struct aq_nic_s *aq_nic = aq_nic_alloc_cold(ndev_ops, eth_ops, - &pdev->dev, self, + pdev, self, port, aq_hw_ops); if (!aq_nic) { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index 07b3c49a16a4..b0abd187cead 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -18,9 +18,20 @@ #include "hw_atl_a0_internal.h" static int hw_atl_a0_get_hw_caps(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps) + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device) { memcpy(aq_hw_caps, &hw_atl_a0_hw_caps_, sizeof(*aq_hw_caps)); + + if (device == HW_ATL_DEVICE_ID_D108 && subsystem_device == 0x0001) + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_10G; + + if (device == HW_ATL_DEVICE_ID_D109 && subsystem_device == 0x0001) { + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_10G; + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_5G; + } + return 0; } diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index ec68c20efcbd..e4e3b8e2d67e 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -18,9 +18,20 @@ #include "hw_atl_b0_internal.h" static int hw_atl_b0_get_hw_caps(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps) + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device) { memcpy(aq_hw_caps, &hw_atl_b0_hw_caps_, sizeof(*aq_hw_caps)); + + if (device == HW_ATL_DEVICE_ID_D108 && subsystem_device == 0x0001) + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_10G; + + if (device == HW_ATL_DEVICE_ID_D109 && subsystem_device == 0x0001) { + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_10G; + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_5G; + } + return 0; } -- cgit v1.2.3-71-gd317 From 1e366161510f266516107a69db91f1f2edaea11c Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:41 +0300 Subject: net: aquantia: Fix hardware DMA stream overload on large MRRS Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by: Pavel Belous Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 12 ++++++++++++ .../ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h | 6 ++++++ 2 files changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index e4e3b8e2d67e..36fddb199160 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -16,6 +16,7 @@ #include "hw_atl_utils.h" #include "hw_atl_llh.h" #include "hw_atl_b0_internal.h" +#include "hw_atl_llh_internal.h" static int hw_atl_b0_get_hw_caps(struct aq_hw_s *self, struct aq_hw_caps_s *aq_hw_caps, @@ -368,6 +369,7 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, }; int err = 0; + u32 val; self->aq_nic_cfg = aq_nic_cfg; @@ -385,6 +387,16 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, hw_atl_b0_hw_rss_set(self, &aq_nic_cfg->aq_rss); hw_atl_b0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss); + /* Force limit MRRS on RDM/TDM to 2K */ + val = aq_hw_read_reg(self, pci_reg_control6_adr); + aq_hw_write_reg(self, pci_reg_control6_adr, (val & ~0x707) | 0x404); + + /* TX DMA total request limit. B0 hardware is not capable to + * handle more than (8K-MRRS) incoming DMA data. + * Value 24 in 256byte units + */ + aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h index 5527fc0e5942..93450ec930e8 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h @@ -2343,6 +2343,9 @@ #define tx_dma_desc_base_addrmsw_adr(descriptor) \ (0x00007c04u + (descriptor) * 0x40) +/* tx dma total request limit */ +#define tx_dma_total_req_limit_adr 0x00007b20u + /* tx interrupt moderation control register definitions * Preprocessor definitions for TX Interrupt Moderation Control Register * Base Address: 0x00008980 @@ -2369,6 +2372,9 @@ /* default value of bitfield reg_res_dsbl */ #define pci_reg_res_dsbl_default 0x1 +/* PCI core control register */ +#define pci_reg_control6_adr 0x1014u + /* global microprocessor scratch pad definitions */ #define glb_cpu_scratch_scp_adr(scratch_scp) (0x00000300u + (scratch_scp) * 0x4) -- cgit v1.2.3-71-gd317 From be08d839d9ef1c9b0e4ed809ec852ff100f9970d Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:42 +0300 Subject: net: aquantia: Extend stat counters to 64bit values Device hardware provides only 32bit counters. Using these directly causes byte counters to overflow soon. A separate nic level structure with 64 bit counters is now used to collect incrementally all the stats and report these counters to ethtool stats and ndev stats. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 25 ++++++- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 35 ++++++++-- .../aquantia/atlantic/hw_atl/hw_atl_utils.c | 80 +++++++--------------- .../aquantia/atlantic/hw_atl/hw_atl_utils.h | 6 +- 4 files changed, 79 insertions(+), 67 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index 4ebd53b3c7da..b3825de6cdfb 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -46,6 +46,28 @@ struct aq_hw_link_status_s { unsigned int mbps; }; +struct aq_stats_s { + u64 uprc; + u64 mprc; + u64 bprc; + u64 erpt; + u64 uptc; + u64 mptc; + u64 bptc; + u64 erpr; + u64 mbtc; + u64 bbtc; + u64 mbrc; + u64 bbrc; + u64 ubrc; + u64 ubtc; + u64 dpc; + u64 dma_pkt_rc; + u64 dma_pkt_tc; + u64 dma_oct_rc; + u64 dma_oct_tc; +}; + #define AQ_HW_IRQ_INVALID 0U #define AQ_HW_IRQ_LEGACY 1U #define AQ_HW_IRQ_MSI 2U @@ -166,8 +188,7 @@ struct aq_hw_ops { int (*hw_update_stats)(struct aq_hw_s *self); - int (*hw_get_hw_stats)(struct aq_hw_s *self, u64 *data, - unsigned int *p_count); + struct aq_stats_s *(*hw_get_hw_stats)(struct aq_hw_s *self); int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index a360ccc298b9..28cbe9d43df6 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -750,16 +750,40 @@ int aq_nic_get_regs_count(struct aq_nic_s *self) void aq_nic_get_stats(struct aq_nic_s *self, u64 *data) { - struct aq_vec_s *aq_vec = NULL; unsigned int i = 0U; unsigned int count = 0U; - int err = 0; + struct aq_vec_s *aq_vec = NULL; + struct aq_stats_s *stats = self->aq_hw_ops.hw_get_hw_stats(self->aq_hw); - err = self->aq_hw_ops.hw_get_hw_stats(self->aq_hw, data, &count); - if (err < 0) + if (!stats) goto err_exit; - data += count; + data[i] = stats->uprc + stats->mprc + stats->bprc; + data[++i] = stats->uprc; + data[++i] = stats->mprc; + data[++i] = stats->bprc; + data[++i] = stats->erpt; + data[++i] = stats->uptc + stats->mptc + stats->bptc; + data[++i] = stats->uptc; + data[++i] = stats->mptc; + data[++i] = stats->bptc; + data[++i] = stats->ubrc; + data[++i] = stats->ubtc; + data[++i] = stats->mbrc; + data[++i] = stats->mbtc; + data[++i] = stats->bbrc; + data[++i] = stats->bbtc; + data[++i] = stats->ubrc + stats->mbrc + stats->bbrc; + data[++i] = stats->ubtc + stats->mbtc + stats->bbtc; + data[++i] = stats->dma_pkt_rc; + data[++i] = stats->dma_pkt_tc; + data[++i] = stats->dma_oct_rc; + data[++i] = stats->dma_oct_tc; + data[++i] = stats->dpc; + + i++; + + data += i; count = 0U; for (i = 0U, aq_vec = self->aq_vec[0]; @@ -769,7 +793,6 @@ void aq_nic_get_stats(struct aq_nic_s *self, u64 *data) } err_exit:; - (void)err; } void aq_nic_get_link_ksettings(struct aq_nic_s *self, diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c index 1fe016fc4bc7..f2ce12ed4218 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c @@ -503,73 +503,43 @@ int hw_atl_utils_update_stats(struct aq_hw_s *self) struct hw_atl_s *hw_self = PHAL_ATLANTIC; struct hw_aq_atl_utils_mbox mbox; - if (!self->aq_link_status.mbps) - return 0; - hw_atl_utils_mpi_read_stats(self, &mbox); #define AQ_SDELTA(_N_) (hw_self->curr_stats._N_ += \ mbox.stats._N_ - hw_self->last_stats._N_) - - AQ_SDELTA(uprc); - AQ_SDELTA(mprc); - AQ_SDELTA(bprc); - AQ_SDELTA(erpt); - - AQ_SDELTA(uptc); - AQ_SDELTA(mptc); - AQ_SDELTA(bptc); - AQ_SDELTA(erpr); - - AQ_SDELTA(ubrc); - AQ_SDELTA(ubtc); - AQ_SDELTA(mbrc); - AQ_SDELTA(mbtc); - AQ_SDELTA(bbrc); - AQ_SDELTA(bbtc); - AQ_SDELTA(dpc); - + if (self->aq_link_status.mbps) { + AQ_SDELTA(uprc); + AQ_SDELTA(mprc); + AQ_SDELTA(bprc); + AQ_SDELTA(erpt); + + AQ_SDELTA(uptc); + AQ_SDELTA(mptc); + AQ_SDELTA(bptc); + AQ_SDELTA(erpr); + + AQ_SDELTA(ubrc); + AQ_SDELTA(ubtc); + AQ_SDELTA(mbrc); + AQ_SDELTA(mbtc); + AQ_SDELTA(bbrc); + AQ_SDELTA(bbtc); + AQ_SDELTA(dpc); + } #undef AQ_SDELTA + hw_self->curr_stats.dma_pkt_rc = stats_rx_dma_good_pkt_counterlsw_get(self); + hw_self->curr_stats.dma_pkt_tc = stats_tx_dma_good_pkt_counterlsw_get(self); + hw_self->curr_stats.dma_oct_rc = stats_rx_dma_good_octet_counterlsw_get(self); + hw_self->curr_stats.dma_oct_tc = stats_tx_dma_good_octet_counterlsw_get(self); memcpy(&hw_self->last_stats, &mbox.stats, sizeof(mbox.stats)); return 0; } -int hw_atl_utils_get_hw_stats(struct aq_hw_s *self, - u64 *data, unsigned int *p_count) +struct aq_stats_s *hw_atl_utils_get_hw_stats(struct aq_hw_s *self) { - struct hw_atl_s *hw_self = PHAL_ATLANTIC; - struct hw_atl_stats_s *stats = &hw_self->curr_stats; - int i = 0; - - data[i] = stats->uprc + stats->mprc + stats->bprc; - data[++i] = stats->uprc; - data[++i] = stats->mprc; - data[++i] = stats->bprc; - data[++i] = stats->erpt; - data[++i] = stats->uptc + stats->mptc + stats->bptc; - data[++i] = stats->uptc; - data[++i] = stats->mptc; - data[++i] = stats->bptc; - data[++i] = stats->ubrc; - data[++i] = stats->ubtc; - data[++i] = stats->mbrc; - data[++i] = stats->mbtc; - data[++i] = stats->bbrc; - data[++i] = stats->bbtc; - data[++i] = stats->ubrc + stats->mbrc + stats->bbrc; - data[++i] = stats->ubtc + stats->mbtc + stats->bbtc; - data[++i] = stats_rx_dma_good_pkt_counterlsw_get(self); - data[++i] = stats_tx_dma_good_pkt_counterlsw_get(self); - data[++i] = stats_rx_dma_good_octet_counterlsw_get(self); - data[++i] = stats_tx_dma_good_octet_counterlsw_get(self); - data[++i] = stats->dpc; - - if (p_count) - *p_count = ++i; - - return 0; + return &PHAL_ATLANTIC->curr_stats; } static const u32 hw_atl_utils_hw_mac_regs[] = { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h index c99cc690e425..21aeca6908d3 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h @@ -129,7 +129,7 @@ struct __packed hw_aq_atl_utils_mbox { struct __packed hw_atl_s { struct aq_hw_s base; struct hw_atl_stats_s last_stats; - struct hw_atl_stats_s curr_stats; + struct aq_stats_s curr_stats; u64 speed; unsigned int chip_features; u32 fw_ver_actual; @@ -207,8 +207,6 @@ int hw_atl_utils_get_fw_version(struct aq_hw_s *self, u32 *fw_version); int hw_atl_utils_update_stats(struct aq_hw_s *self); -int hw_atl_utils_get_hw_stats(struct aq_hw_s *self, - u64 *data, - unsigned int *p_count); +struct aq_stats_s *hw_atl_utils_get_hw_stats(struct aq_hw_s *self); #endif /* HW_ATL_UTILS_H */ -- cgit v1.2.3-71-gd317 From 9f8a2203a542f5f3cdeb17f40250c49bb87aa7e3 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:43 +0300 Subject: net: aquantia: Fill ndev stat couters from hardware Originally they were filled from ring sw counters. These sometimes incorrectly calculate byte and packet amounts when using LRO/LSO and jumboframes. Filling ndev counters from hardware makes them precise. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 32 ++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 28cbe9d43df6..307caac68731 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -37,6 +37,8 @@ static unsigned int aq_itr_rx; module_param_named(aq_itr_rx, aq_itr_rx, uint, 0644); MODULE_PARM_DESC(aq_itr_rx, "RX interrupt throttle rate"); +static void aq_nic_update_ndev_stats(struct aq_nic_s *self); + static void aq_nic_rss_init(struct aq_nic_s *self, unsigned int num_rss_queues) { struct aq_nic_cfg_s *cfg = &self->aq_nic_cfg; @@ -166,11 +168,7 @@ static int aq_nic_update_link_status(struct aq_nic_s *self) static void aq_nic_service_timer_cb(struct timer_list *t) { struct aq_nic_s *self = from_timer(self, t, service_timer); - struct net_device *ndev = aq_nic_get_ndev(self); int err = 0; - unsigned int i = 0U; - struct aq_ring_stats_rx_s stats_rx; - struct aq_ring_stats_tx_s stats_tx; if (aq_utils_obj_test(&self->header.flags, AQ_NIC_FLAGS_IS_NOT_READY)) goto err_exit; @@ -182,19 +180,8 @@ static void aq_nic_service_timer_cb(struct timer_list *t) if (self->aq_hw_ops.hw_update_stats) self->aq_hw_ops.hw_update_stats(self->aq_hw); - memset(&stats_rx, 0U, sizeof(struct aq_ring_stats_rx_s)); - memset(&stats_tx, 0U, sizeof(struct aq_ring_stats_tx_s)); - for (i = AQ_DIMOF(self->aq_vec); i--;) { - if (self->aq_vec[i]) - aq_vec_add_stats(self->aq_vec[i], &stats_rx, &stats_tx); - } + aq_nic_update_ndev_stats(self); - ndev->stats.rx_packets = stats_rx.packets; - ndev->stats.rx_bytes = stats_rx.bytes; - ndev->stats.rx_errors = stats_rx.errors; - ndev->stats.tx_packets = stats_tx.packets; - ndev->stats.tx_bytes = stats_tx.bytes; - ndev->stats.tx_errors = stats_tx.errors; err_exit: mod_timer(&self->service_timer, @@ -795,6 +782,19 @@ void aq_nic_get_stats(struct aq_nic_s *self, u64 *data) err_exit:; } +static void aq_nic_update_ndev_stats(struct aq_nic_s *self) +{ + struct net_device *ndev = self->ndev; + struct aq_stats_s *stats = self->aq_hw_ops.hw_get_hw_stats(self->aq_hw); + + ndev->stats.rx_packets = stats->uprc + stats->mprc + stats->bprc; + ndev->stats.rx_bytes = stats->ubrc + stats->mbrc + stats->bbrc; + ndev->stats.rx_errors = stats->erpr; + ndev->stats.tx_packets = stats->uptc + stats->mptc + stats->bptc; + ndev->stats.tx_bytes = stats->ubtc + stats->mbtc + stats->bbtc; + ndev->stats.tx_errors = stats->erpt; +} + void aq_nic_get_link_ksettings(struct aq_nic_s *self, struct ethtool_link_ksettings *cmd) { -- cgit v1.2.3-71-gd317 From 45cc1c7ad47c4d166d15c7bce449d2de4daef0c5 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:44 +0300 Subject: net: aquantia: Fill in multicast counter in ndev stats from hardware This metric comes from HW and is also diff-calculated, like other counters Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 307caac68731..b3a5d1fbc713 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -793,6 +793,7 @@ static void aq_nic_update_ndev_stats(struct aq_nic_s *self) ndev->stats.tx_packets = stats->uptc + stats->mptc + stats->bptc; ndev->stats.tx_bytes = stats->ubtc + stats->mbtc + stats->bbtc; ndev->stats.tx_errors = stats->erpt; + ndev->stats.multicast = stats->mprc; } void aq_nic_get_link_ksettings(struct aq_nic_s *self, -- cgit v1.2.3-71-gd317 From fdb4a0830e74acfbe84d4d4e6772ea09c96786ad Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:45 +0300 Subject: net: aquantia: Improve link state and statistics check interval callback Reduce timeout from 2 secs to 1 sec. If link is down, reduce it to 500msec. This speeds up link detection. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_cfg.h | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h index 57e796870595..73b93a7b4800 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h @@ -50,7 +50,7 @@ #define AQ_CFG_PCI_FUNC_MSIX_IRQS 9U #define AQ_CFG_PCI_FUNC_PORTS 2U -#define AQ_CFG_SERVICE_TIMER_INTERVAL (2 * HZ) +#define AQ_CFG_SERVICE_TIMER_INTERVAL (1 * HZ) #define AQ_CFG_POLLING_TIMER_INTERVAL ((unsigned int)(2 * HZ)) #define AQ_CFG_SKB_FRAGS_MAX 32U diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index b3a5d1fbc713..75a894a9251c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -168,6 +168,7 @@ static int aq_nic_update_link_status(struct aq_nic_s *self) static void aq_nic_service_timer_cb(struct timer_list *t) { struct aq_nic_s *self = from_timer(self, t, service_timer); + int ctimer = AQ_CFG_SERVICE_TIMER_INTERVAL; int err = 0; if (aq_utils_obj_test(&self->header.flags, AQ_NIC_FLAGS_IS_NOT_READY)) @@ -182,10 +183,12 @@ static void aq_nic_service_timer_cb(struct timer_list *t) aq_nic_update_ndev_stats(self); + /* If no link - use faster timer rate to detect link up asap */ + if (!netif_carrier_ok(self->ndev)) + ctimer = max(ctimer / 2, 1); err_exit: - mod_timer(&self->service_timer, - jiffies + AQ_CFG_SERVICE_TIMER_INTERVAL); + mod_timer(&self->service_timer, jiffies + ctimer); } static void aq_nic_polling_timer_cb(struct timer_list *t) -- cgit v1.2.3-71-gd317 From f3e2778429c2ad8555e888858e0f0e98c86c4b0f Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:46 +0300 Subject: net: aquantia: Update hw counters on hw init On very first start we should read out current HW counter values to make diff based calculations later. This also should be done each time NIC gets down/up or wakes up after sleep state. We reset link state explicitly to prevent diffs from being summed this first time. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 4 ++++ drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index b0abd187cead..f18dce14c93c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -344,6 +344,10 @@ static int hw_atl_a0_hw_init(struct aq_hw_s *self, hw_atl_a0_hw_rss_set(self, &aq_nic_cfg->aq_rss); hw_atl_a0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss); + /* Reset link status and read out initial hardware counters */ + self->aq_link_status.mbps = 0; + hw_atl_utils_update_stats(self); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 36fddb199160..e4a22ce7bf09 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -397,6 +397,10 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, */ aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24); + /* Reset link status and read out initial hardware counters */ + self->aq_link_status.mbps = 0; + hw_atl_utils_update_stats(self); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; -- cgit v1.2.3-71-gd317 From 98bc036de40489416d61ab175bb417c094e7783c Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:47 +0300 Subject: net: aquantia: Fix typo in ethtool statistics names Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c index 70efb7467bf3..f2d8063a2cef 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c @@ -66,14 +66,14 @@ static const char aq_ethtool_stat_names[][ETH_GSTRING_LEN] = { "OutUCast", "OutMCast", "OutBCast", - "InUCastOctects", - "OutUCastOctects", - "InMCastOctects", - "OutMCastOctects", - "InBCastOctects", - "OutBCastOctects", - "InOctects", - "OutOctects", + "InUCastOctets", + "OutUCastOctets", + "InMCastOctets", + "OutMCastOctets", + "InBCastOctets", + "OutBCastOctets", + "InOctets", + "OutOctets", "InPacketsDma", "OutPacketsDma", "InOctetsDma", -- cgit v1.2.3-71-gd317 From d4c242d4ba5730b62579969804cd8fcf58b9c84f Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:48 +0300 Subject: net: aquantia: Increment driver version Add a suffix to distinguish kernel mainline version and aquantia releases Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_cfg.h | 3 ++- drivers/net/ethernet/aquantia/atlantic/ver.h | 6 ++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h index 73b93a7b4800..105fdb958cef 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h @@ -80,6 +80,7 @@ #define AQ_CFG_DRV_VERSION __stringify(NIC_MAJOR_DRIVER_VERSION)"."\ __stringify(NIC_MINOR_DRIVER_VERSION)"."\ __stringify(NIC_BUILD_DRIVER_VERSION)"."\ - __stringify(NIC_REVISION_DRIVER_VERSION) + __stringify(NIC_REVISION_DRIVER_VERSION) \ + AQ_CFG_DRV_VERSION_SUFFIX #endif /* AQ_CFG_H */ diff --git a/drivers/net/ethernet/aquantia/atlantic/ver.h b/drivers/net/ethernet/aquantia/atlantic/ver.h index 0de858d215c2..9009f2651e70 100644 --- a/drivers/net/ethernet/aquantia/atlantic/ver.h +++ b/drivers/net/ethernet/aquantia/atlantic/ver.h @@ -11,8 +11,10 @@ #define VER_H #define NIC_MAJOR_DRIVER_VERSION 1 -#define NIC_MINOR_DRIVER_VERSION 5 -#define NIC_BUILD_DRIVER_VERSION 345 +#define NIC_MINOR_DRIVER_VERSION 6 +#define NIC_BUILD_DRIVER_VERSION 13 #define NIC_REVISION_DRIVER_VERSION 0 +#define AQ_CFG_DRV_VERSION_SUFFIX "-kern" + #endif /* VER_H */ -- cgit v1.2.3-71-gd317 From c647c0d62c82eb3ddf78a0d8b3d58819d9f552aa Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Thu, 14 Dec 2017 16:56:14 +0100 Subject: net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for Telit ME910 PID 0x1101. Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index d2ca5a202e8d..3000ddd1c7e2 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1211,6 +1211,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ + {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */ {QMI_FIXED_INTF(0x1c9e, 0x9801, 3)}, /* Telewell TW-3G HSPA+ */ -- cgit v1.2.3-71-gd317 From f57ab9a01a36ef3454333251cc57e3a9948b17bf Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 17 Nov 2017 11:56:41 +0000 Subject: drivers: base: cacheinfo: fix cache type for non-architected system cache Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") doesn't initialise the cache type if it's present only in DT and the architecture is not aware of it. They are unified system level cache which are generally transparent. This patch check if the cache type is set to NOCACHE but the DT node indicates that it's unified cache and sets the cache type accordingly. Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") Reported-and-tested-by: Tan Xiaojun Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/cacheinfo.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/base/cacheinfo.c b/drivers/base/cacheinfo.c index eb3af2739537..07532d83be0b 100644 --- a/drivers/base/cacheinfo.c +++ b/drivers/base/cacheinfo.c @@ -186,6 +186,11 @@ static void cache_associativity(struct cacheinfo *this_leaf) this_leaf->ways_of_associativity = (size / nr_sets) / line_size; } +static bool cache_node_is_unified(struct cacheinfo *this_leaf) +{ + return of_property_read_bool(this_leaf->of_node, "cache-unified"); +} + static void cache_of_override_properties(unsigned int cpu) { int index; @@ -194,6 +199,14 @@ static void cache_of_override_properties(unsigned int cpu) for (index = 0; index < cache_leaves(cpu); index++) { this_leaf = this_cpu_ci->info_list + index; + /* + * init_cache_level must setup the cache level correctly + * overriding the architecturally specified levels, so + * if type is NONE at this stage, it should be unified + */ + if (this_leaf->type == CACHE_TYPE_NOCACHE && + cache_node_is_unified(this_leaf)) + this_leaf->type = CACHE_TYPE_UNIFIED; cache_size(this_leaf); cache_get_line_size(this_leaf); cache_nr_sets(this_leaf); -- cgit v1.2.3-71-gd317 From 043ee1debd0b29c16c4c4b11a348ca667bfe9144 Mon Sep 17 00:00:00 2001 From: Hemanth Puranik Date: Fri, 15 Dec 2017 20:05:58 +0530 Subject: net: qcom/emac: Reduce timeout for mdio read/write Currently mdio read/write takes around ~115us as the timeout between status check is set to 100us. By reducing the timeout to 1us mdio read/write takes ~15us to complete. This improves the link up event response. Signed-off-by: Hemanth Puranik Acked-by: Timur Tabi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c index 18461fcb9815..53dbf1e163a8 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c @@ -47,6 +47,7 @@ #define MDIO_CLK_25_28 7 #define MDIO_WAIT_TIMES 1000 +#define MDIO_STATUS_DELAY_TIME 1 static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) { @@ -65,7 +66,7 @@ static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, !(reg & (MDIO_START | MDIO_BUSY)), - 100, MDIO_WAIT_TIMES * 100)) + MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100)) return -EIO; return (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; @@ -88,8 +89,8 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) writel(reg, adpt->base + EMAC_MDIO_CTRL); if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, - !(reg & (MDIO_START | MDIO_BUSY)), 100, - MDIO_WAIT_TIMES * 100)) + !(reg & (MDIO_START | MDIO_BUSY)), + MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100)) return -EIO; return 0; -- cgit v1.2.3-71-gd317 From caea4f384858ee7861367920df36995e7acfe160 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 15 Dec 2017 16:21:50 +0100 Subject: drm/sun4i: validate modes for HDMI When I connected my cubieboard running 4.15-rc1 to my 4k display I got no picture. Some digging found that there is no check against the upper pixelclock limit of the HDMI output, so X selects a 4kp60 format at 594 MHz, which obviously won't work. The patch below adds a check for the upper bound of what this hardware can do, and it checks if the requested tmds clock can be obtained. It also allows for the +/- 0.5% pixel clock variation that the HDMI spec permits. That code is based on commit 22d0be2a557e ("drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callback") from Jose Abreu for drm/arc. Signed-off-by: Hans Verkuil Thanks-to: Jose Abreu Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/162854cb-c7bd-d9ce-9fa0-9a6cd89c621b@xs4all.nl --- drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c index dda904ec0534..c12f9bd12904 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c @@ -208,8 +208,27 @@ static int sun4i_hdmi_get_modes(struct drm_connector *connector) return ret; } +static int sun4i_hdmi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector); + long rate = mode->clock * 1000; + long diff = rate / 200; /* +-0.5% allowed by HDMI spec */ + long rounded_rate; + + /* 165 MHz is the typical max pixelclock frequency for HDMI <= 1.2 */ + if (rate > 165000000) + return MODE_CLOCK_HIGH; + rounded_rate = clk_round_rate(hdmi->tmds_clk, rate); + if (max(rounded_rate, rate) - min(rounded_rate, rate) < diff && + rounded_rate > 0) + return MODE_OK; + return MODE_NOCLOCK; +} + static const struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = { .get_modes = sun4i_hdmi_get_modes, + .mode_valid = sun4i_hdmi_mode_valid, }; static enum drm_connector_status -- cgit v1.2.3-71-gd317 From fdf2e821052958a114618a95ab18a300d0b080cb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 5 Dec 2017 11:51:40 +0100 Subject: mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens. Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected. In our case UBIFS failed with this bug because it expects erased pages to be really empty: UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117 Signed-off-by: Sascha Hauer Reviewed-by: Richard Weinberger Acked-by: Boris Brezillon Signed-off-by: Richard Weinberger --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 50f8d4a1b983..d4d824ef64e9 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1067,9 +1067,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, return ret; } - /* handle the block mark swapping */ - block_mark_swapping(this, payload_virt, auxiliary_virt); - /* Loop over status bytes, accumulating ECC status. */ status = auxiliary_virt + nfc_geo->auxiliary_status_offset; @@ -1158,6 +1155,9 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, max_bitflips = max_t(unsigned int, max_bitflips, *status); } + /* handle the block mark swapping */ + block_mark_swapping(this, buf, auxiliary_virt); + if (oob_required) { /* * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() -- cgit v1.2.3-71-gd317 From e44b9a9c135727f3410e029910275f40681dc8bc Mon Sep 17 00:00:00 2001 From: Albert Hsieh Date: Mon, 20 Nov 2017 11:26:26 +0800 Subject: mtd: nand: brcmnand: Zero bitflip is not an error A negative return value of brcmstb_nand_verify_erased_page() indicates a real bitflip error of an erased page, and other return values (>= 0) show the corrected bitflip number. Zero return value means no bitflip, but the current driver code treats it as an error, and eventually leads to falsely reported ECC error. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflip") Signed-off-by: Albert Hsieh Acked-by: Boris Brezillon Signed-off-by: Richard Weinberger --- drivers/mtd/nand/brcmnand/brcmnand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index e0eb51d8c012..dd56a671ea42 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -1763,7 +1763,7 @@ try_dmaread: err = brcmstb_nand_verify_erased_page(mtd, chip, buf, addr); /* erased page bitflips corrected */ - if (err > 0) + if (err >= 0) return err; } -- cgit v1.2.3-71-gd317 From bc2fd1b11097ad981478abcc0328784ea131ac29 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 6 Dec 2017 18:27:14 +0100 Subject: mtd: nand: gpio: Fix ALE gpio configuration Fixes a copy/paste error in commit f3d0d8d938b4d ("mtd: nand: gpio: Convert to use GPIO descriptors") which breaks gpio-nand driver Fixes: f3d0d8d938b4d ("mtd: nand: gpio: Convert to use GPIO descriptors") Cc: Linus Walleij Signed-off-by: Christophe Leroy Reviewed-by: Richard Weinberger Acked-by: Boris Brezillon Reviewed-by: Linus Walleij Signed-off-by: Richard Weinberger --- drivers/mtd/nand/gpio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index 484f7fbc3f7d..a8bde6665c24 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -253,9 +253,9 @@ static int gpio_nand_probe(struct platform_device *pdev) goto out_ce; } - gpiomtd->nwp = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW); - if (IS_ERR(gpiomtd->nwp)) { - ret = PTR_ERR(gpiomtd->nwp); + gpiomtd->ale = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW); + if (IS_ERR(gpiomtd->ale)) { + ret = PTR_ERR(gpiomtd->ale); goto out_ce; } -- cgit v1.2.3-71-gd317 From b2162117171864ef48d43cf5d888f3e8012c6c06 Mon Sep 17 00:00:00 2001 From: Bhawanpreet Lakha Date: Fri, 24 Nov 2017 17:26:28 -0500 Subject: drm/amd/display: add pipe locking before front end programing Add pipe locking/unlocking before we program the front end Signed-off-by: Bhawanpreet Lakha Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 26 +++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 07ff8d2faf3f..d844fadcd56f 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -2866,16 +2866,19 @@ static void dce110_apply_ctx_for_surface( int num_planes, struct dc_state *context) { - int i, be_idx; + int i; if (num_planes == 0) return; - be_idx = -1; for (i = 0; i < dc->res_pool->pipe_count; i++) { - if (stream == context->res_ctx.pipe_ctx[i].stream) { - be_idx = context->res_ctx.pipe_ctx[i].stream_res.tg->inst; - break; + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; + struct pipe_ctx *old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i]; + + if (stream == pipe_ctx->stream) { + if (!pipe_ctx->top_pipe && + (pipe_ctx->plane_state || old_pipe_ctx->plane_state)) + dc->hwss.pipe_control_lock(dc, pipe_ctx, true); } } @@ -2895,9 +2898,22 @@ static void dce110_apply_ctx_for_surface( context->stream_count); dce110_program_front_end_for_pipe(dc, pipe_ctx); + + dc->hwss.update_plane_addr(dc, pipe_ctx); + program_surface_visibility(dc, pipe_ctx); } + + for (i = 0; i < dc->res_pool->pipe_count; i++) { + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; + struct pipe_ctx *old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i]; + + if ((stream == pipe_ctx->stream) && + (!pipe_ctx->top_pipe) && + (pipe_ctx->plane_state || old_pipe_ctx->plane_state)) + dc->hwss.pipe_control_lock(dc, pipe_ctx, false); + } } static void dce110_power_down_fe(struct dc *dc, int fe_idx) -- cgit v1.2.3-71-gd317 From 56a9b95c4d3386a98f69f641dd6018886ed2e9d6 Mon Sep 17 00:00:00 2001 From: Dmytro Laktyushkin Date: Mon, 13 Nov 2017 17:03:53 -0500 Subject: drm/amd/display: set chroma taps to 1 when not scaling Signed-off-by: Dmytro Laktyushkin Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/calcs/dcn_calcs.c | 9 +++++++++ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c | 9 ++++----- 2 files changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/calcs/dcn_calcs.c b/drivers/gpu/drm/amd/display/dc/calcs/dcn_calcs.c index 3dce35e66b09..b142629a1058 100644 --- a/drivers/gpu/drm/amd/display/dc/calcs/dcn_calcs.c +++ b/drivers/gpu/drm/amd/display/dc/calcs/dcn_calcs.c @@ -900,6 +900,15 @@ bool dcn_validate_bandwidth( v->override_vta_ps[input_idx] = pipe->plane_res.scl_data.taps.v_taps; v->override_hta_pschroma[input_idx] = pipe->plane_res.scl_data.taps.h_taps_c; v->override_vta_pschroma[input_idx] = pipe->plane_res.scl_data.taps.v_taps_c; + /* + * Spreadsheet doesn't handle taps_c is one properly, + * need to force Chroma to always be scaled to pass + * bandwidth validation. + */ + if (v->override_hta_pschroma[input_idx] == 1) + v->override_hta_pschroma[input_idx] = 2; + if (v->override_vta_pschroma[input_idx] == 1) + v->override_vta_pschroma[input_idx] = 2; v->source_scan[input_idx] = (pipe->plane_state->rotation % 2) ? dcn_bw_vert : dcn_bw_hor; } if (v->is_line_buffer_bpp_fixed == dcn_bw_yes) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c index 74e7c82bdc76..a9d55d0dd69e 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c @@ -159,11 +159,10 @@ bool dpp_get_optimal_number_of_taps( scl_data->taps.h_taps = 1; if (IDENTITY_RATIO(scl_data->ratios.vert)) scl_data->taps.v_taps = 1; - /* - * Spreadsheet doesn't handle taps_c is one properly, - * need to force Chroma to always be scaled to pass - * bandwidth validation. - */ + if (IDENTITY_RATIO(scl_data->ratios.horz_c)) + scl_data->taps.h_taps_c = 1; + if (IDENTITY_RATIO(scl_data->ratios.vert_c)) + scl_data->taps.v_taps_c = 1; } return true; -- cgit v1.2.3-71-gd317 From 78288503199d0a33b69b972a44a4cf15df989899 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Fri, 10 Nov 2017 10:44:24 -0500 Subject: drm/amd/display: fix missing pixel clock adjustment for dongle Signed-off-by: Eric Yang Reviewed-by: Tony Cheng Reviewed-by: Andrew Jiang Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index e27ed4a45265..42a111b9505d 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -1801,7 +1801,7 @@ static void disable_link(struct dc_link *link, enum signal_type signal) link->link_enc->funcs->disable_output(link->link_enc, signal, link); } -bool dp_active_dongle_validate_timing( +static bool dp_active_dongle_validate_timing( const struct dc_crtc_timing *timing, const struct dc_dongle_caps *dongle_caps) { @@ -1833,6 +1833,8 @@ bool dp_active_dongle_validate_timing( /* Check Color Depth and Pixel Clock */ if (timing->pixel_encoding == PIXEL_ENCODING_YCBCR420) required_pix_clk /= 2; + else if (timing->pixel_encoding == PIXEL_ENCODING_YCBCR422) + required_pix_clk = required_pix_clk * 2 / 3; switch (timing->display_color_depth) { case COLOR_DEPTH_666: -- cgit v1.2.3-71-gd317 From becd0875f4393a992afbf57aa323f7bf1a71c3ff Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Fri, 1 Dec 2017 13:26:05 -0500 Subject: drm/amd/display: Fix rehook MST display not light back on Original applied dm_restore_drm_connector_state() has got removed. Set link status to BAD before hotplug() event could trigger another modeset from userspace. The fix "Fix MST daisy chain SST not light up" commit makes so it is trying to create a stream prior to dc_sink. That makes dc_sink is not present in create_stream_for_sink(). Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Roman Li Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 13 +++--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 2 + .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 51 ++++++++++++++++++++++ .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.h | 1 + 4 files changed, 62 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index f71fe6d2ddda..bb5fa895fb64 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2336,7 +2336,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, const struct dm_connector_state *dm_state) { struct drm_display_mode *preferred_mode = NULL; - const struct drm_connector *drm_connector; + struct drm_connector *drm_connector; struct dc_stream_state *stream = NULL; struct drm_display_mode mode = *drm_mode; bool native_mode_found = false; @@ -2355,11 +2355,13 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, if (!aconnector->dc_sink) { /* - * Exclude MST from creating fake_sink - * TODO: need to enable MST into fake_sink feature + * Create dc_sink when necessary to MST + * Don't apply fake_sink to MST */ - if (aconnector->mst_port) - goto stream_create_fail; + if (aconnector->mst_port) { + dm_dp_mst_dc_sink_create(drm_connector); + goto mst_dc_sink_create_done; + } if (create_fake_sink(aconnector)) goto stream_create_fail; @@ -2410,6 +2412,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, stream_create_fail: dm_state_null: drm_connector_null: +mst_dc_sink_create_done: return stream; } diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index 117521c6a6ed..0230250a1164 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -189,6 +189,8 @@ struct amdgpu_dm_connector { struct mutex hpd_lock; bool fake_enable; + + bool mst_connected; }; #define to_amdgpu_dm_connector(x) container_of(x, struct amdgpu_dm_connector, base) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index f8efb98b1fa7..638c2c2b5cd7 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -185,6 +185,42 @@ static int dm_connector_update_modes(struct drm_connector *connector, return ret; } +void dm_dp_mst_dc_sink_create(struct drm_connector *connector) +{ + struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); + struct edid *edid; + struct dc_sink *dc_sink; + struct dc_sink_init_data init_params = { + .link = aconnector->dc_link, + .sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST }; + + edid = drm_dp_mst_get_edid(connector, &aconnector->mst_port->mst_mgr, aconnector->port); + + if (!edid) { + drm_mode_connector_update_edid_property( + &aconnector->base, + NULL); + return; + } + + aconnector->edid = edid; + + dc_sink = dc_link_add_remote_sink( + aconnector->dc_link, + (uint8_t *)aconnector->edid, + (aconnector->edid->extensions + 1) * EDID_LENGTH, + &init_params); + + dc_sink->priv = aconnector; + aconnector->dc_sink = dc_sink; + + amdgpu_dm_add_sink_to_freesync_module( + connector, aconnector->edid); + + drm_mode_connector_update_edid_property( + &aconnector->base, aconnector->edid); +} + static int dm_dp_mst_get_modes(struct drm_connector *connector) { struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); @@ -311,6 +347,7 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, drm_mode_connector_set_path_property(connector, pathprop); drm_connector_list_iter_end(&conn_iter); + aconnector->mst_connected = true; return &aconnector->base; } } @@ -363,6 +400,8 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, */ amdgpu_dm_connector_funcs_reset(connector); + aconnector->mst_connected = true; + DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n", aconnector, connector->base.id, aconnector->mst_port); @@ -394,6 +433,8 @@ static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr, drm_mode_connector_update_edid_property( &aconnector->base, NULL); + + aconnector->mst_connected = false; } static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr) @@ -404,10 +445,18 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr) drm_kms_helper_hotplug_event(dev); } +static void dm_dp_mst_link_status_reset(struct drm_connector *connector) +{ + mutex_lock(&connector->dev->mode_config.mutex); + drm_mode_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD); + mutex_unlock(&connector->dev->mode_config.mutex); +} + static void dm_dp_mst_register_connector(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct amdgpu_device *adev = dev->dev_private; + struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); if (adev->mode_info.rfbdev) drm_fb_helper_add_one_connector(&adev->mode_info.rfbdev->helper, connector); @@ -416,6 +465,8 @@ static void dm_dp_mst_register_connector(struct drm_connector *connector) drm_connector_register(connector); + if (aconnector->mst_connected) + dm_dp_mst_link_status_reset(connector); } static const struct drm_dp_mst_topology_cbs dm_mst_cbs = { diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h index 2da851b40042..8cf51da26657 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h @@ -31,5 +31,6 @@ struct amdgpu_dm_connector; void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm, struct amdgpu_dm_connector *aconnector); +void dm_dp_mst_dc_sink_create(struct drm_connector *connector); #endif -- cgit v1.2.3-71-gd317 From 74657181e7c449351d1ad28cf43941bc333e1bd6 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 1 Dec 2017 15:08:05 +0300 Subject: thunderbolt: Mask ring interrupt properly when polling starts When ring enters polling mode we are expected to mask the ring interrupt before the callback is called. However, the current code actually unmasks it probably because of a copy-paste mistake. Mask the interrupt properly from now on. Fixes: 4ffe722eefcb ("thunderbolt: Add polling mode for rings") Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat Signed-off-by: Greg Kroah-Hartman --- drivers/thunderbolt/nhi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index 419a7a90bce0..f45bcbc63738 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -339,7 +339,7 @@ static void __ring_interrupt(struct tb_ring *ring) return; if (ring->start_poll) { - __ring_interrupt_mask(ring, false); + __ring_interrupt_mask(ring, true); ring->start_poll(ring->poll_data); } else { schedule_work(&ring->work); -- cgit v1.2.3-71-gd317 From f870c1ff65a6d1f3a083f277280802ee09a5b44d Mon Sep 17 00:00:00 2001 From: Alexey Kodanev Date: Thu, 14 Dec 2017 20:20:00 +0300 Subject: vxlan: restore dev->mtu setting based on lower device Stefano Brivio says: Commit a985343ba906 ("vxlan: refactor verification and application of configuration") introduced a change in the behaviour of initial MTU setting: earlier, the MTU for a link created on top of a given lower device, without an initial MTU specification, was set to the MTU of the lower device minus headroom as a result of this path in vxlan_dev_configure(): if (!conf->mtu) dev->mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); which is now gone. Now, the initial MTU, in absence of a configured value, is simply set by ether_setup() to ETH_DATA_LEN (1500 bytes). This breaks userspace expectations in case the MTU of the lower device is higher than 1500 bytes minus headroom. This patch restores the previous behaviour on newlink operation. Since max_mtu can be negative and we update dev->mtu directly, also check it for valid minimum. Reported-by: Junhan Yan Fixes: a985343ba906 ("vxlan: refactor verification and application of configuration") Signed-off-by: Alexey Kodanev Acked-by: Stefano Brivio Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 19b9cc51079e..1000b0e4ee01 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -3103,6 +3103,11 @@ static void vxlan_config_apply(struct net_device *dev, max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); + if (max_mtu < ETH_MIN_MTU) + max_mtu = ETH_MIN_MTU; + + if (!changelink && !conf->mtu) + dev->mtu = max_mtu; } if (dev->mtu > max_mtu) -- cgit v1.2.3-71-gd317 From 1784f9144b143a1e8b19fe94083b040aa559182b Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 5 Dec 2017 14:14:47 +0100 Subject: drivers/misc/intel/pti: Rename the header file to free up the namespace We'd like to use the 'PTI' acronym for 'Page Table Isolation' - free up the namespace by renaming the driver header to . (Also standardize the header guard name while at it.) Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: J Freyensee Cc: Greg Kroah-Hartman Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- drivers/misc/pti.c | 2 +- include/linux/intel-pti.h | 43 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pti.h | 43 ------------------------------------------- 3 files changed, 44 insertions(+), 44 deletions(-) create mode 100644 include/linux/intel-pti.h delete mode 100644 include/linux/pti.h (limited to 'drivers') diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index eda38cbe8530..41f2a9f6851d 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/intel-pti.h b/include/linux/intel-pti.h new file mode 100644 index 000000000000..2710d72de3c9 --- /dev/null +++ b/include/linux/intel-pti.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) Intel 2011 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * The PTI (Parallel Trace Interface) driver directs trace data routed from + * various parts in the system out through the Intel Penwell PTI port and + * out of the mobile device for analysis with a debugging tool + * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, + * compact JTAG, standard. + * + * This header file will allow other parts of the OS to use the + * interface to write out it's contents for debugging a mobile system. + */ + +#ifndef LINUX_INTEL_PTI_H_ +#define LINUX_INTEL_PTI_H_ + +/* offset for last dword of any PTI message. Part of MIPI P1149.7 */ +#define PTI_LASTDWORD_DTS 0x30 + +/* basic structure used as a write address to the PTI HW */ +struct pti_masterchannel { + u8 master; + u8 channel; +}; + +/* the following functions are defined in misc/pti.c */ +void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count); +struct pti_masterchannel *pti_request_masterchannel(u8 type, + const char *thread_name); +void pti_release_masterchannel(struct pti_masterchannel *mc); + +#endif /* LINUX_INTEL_PTI_H_ */ diff --git a/include/linux/pti.h b/include/linux/pti.h deleted file mode 100644 index b3ea01a3197e..000000000000 --- a/include/linux/pti.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) Intel 2011 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * The PTI (Parallel Trace Interface) driver directs trace data routed from - * various parts in the system out through the Intel Penwell PTI port and - * out of the mobile device for analysis with a debugging tool - * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, - * compact JTAG, standard. - * - * This header file will allow other parts of the OS to use the - * interface to write out it's contents for debugging a mobile system. - */ - -#ifndef PTI_H_ -#define PTI_H_ - -/* offset for last dword of any PTI message. Part of MIPI P1149.7 */ -#define PTI_LASTDWORD_DTS 0x30 - -/* basic structure used as a write address to the PTI HW */ -struct pti_masterchannel { - u8 master; - u8 channel; -}; - -/* the following functions are defined in misc/pti.c */ -void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count); -struct pti_masterchannel *pti_request_masterchannel(u8 type, - const char *thread_name); -void pti_release_masterchannel(struct pti_masterchannel *mc); - -#endif /*PTI_H_*/ -- cgit v1.2.3-71-gd317 From bcf3f1752a622f1372d3252d0fea8855d89812e7 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 12 Dec 2017 21:52:26 +0100 Subject: parisc: Hide Diva-built-in serial aux and graphics card Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by: Helge Deller Cc: # v3.0+ --- drivers/parisc/lba_pci.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers') diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index a25fed52f7e9..41b740aed3a3 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1692,3 +1692,36 @@ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) iounmap(base_addr); } + +/* + * The design of the Diva management card in rp34x0 machines (rp3410, rp3440) + * seems rushed, so that many built-in components simply don't work. + * The following quirks disable the serial AUX port and the built-in ATI RV100 + * Radeon 7000 graphics card which both don't have any external connectors and + * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as + * such makes those machines the only PARISC machines on which we can't use + * ttyS0 as boot console. + */ +static void quirk_diva_ati_card(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1292) + return; + + dev_info(&dev->dev, "Hiding Diva built-in ATI card"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY, + quirk_diva_ati_card); + +static void quirk_diva_aux_disable(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1291) + return; + + dev_info(&dev->dev, "Hiding Diva built-in AUX serial device"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + quirk_diva_aux_disable); -- cgit v1.2.3-71-gd317 From d82c3682168431d29ba1741d0cd5ef45c68bf8e0 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Mon, 18 Dec 2017 08:26:28 +0100 Subject: mtd: Fix mtd_check_oob_ops() The mtd_check_oob_ops() helper verifies if the operation defined by the user is correct. Fix the check that verifies if the entire requested area exists. This check is too restrictive and will fail anytime the last data byte of the very last page is included in an operation. Fixes: 5cdd929da53d ("mtd: Add sanity checks in mtd_write/read_oob()") Signed-off-by: Miquel Raynal Acked-by: Boris Brezillon Signed-off-by: Richard Weinberger --- drivers/mtd/mtdcore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index f80e911b8843..73b605577447 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1114,7 +1114,7 @@ static int mtd_check_oob_ops(struct mtd_info *mtd, loff_t offs, if (!ops->oobbuf) ops->ooblen = 0; - if (offs < 0 || offs + ops->len >= mtd->size) + if (offs < 0 || offs + ops->len > mtd->size) return -EINVAL; if (ops->ooblen) { -- cgit v1.2.3-71-gd317 From 5839ee7389e893a31e4e3c9cf17b50d14103c902 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 15 Dec 2017 03:07:18 +0100 Subject: PCI / PM: Force devices to D0 in pci_pm_thaw_noirq() It is incorrect to call pci_restore_state() for devices in low-power states (D1-D3), as that involves the restoration of MSI setup which requires MMIO to be operational and that is only the case in D0. However, pci_pm_thaw_noirq() may do that if the driver's "freeze" callbacks put the device into a low-power state, so fix it by making it force devices into D0 via pci_set_power_state() instead of trying to "update" their power state which is pointless. Fixes: e60514bd4485 (PCI/PM: Restore the status of PCI devices across hibernation) Cc: 4.13+ # 4.13+ Reported-by: Thomas Gleixner Reported-by: Maarten Lankhorst Tested-by: Thomas Gleixner Tested-by: Maarten Lankhorst Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas --- drivers/pci/pci-driver.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 945099d49f8f..14fd865a5120 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -1012,7 +1012,12 @@ static int pci_pm_thaw_noirq(struct device *dev) if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_update_current_state(pci_dev, PCI_D0); + /* + * pci_restore_state() requires the device to be in D0 (because of MSI + * restoration among other things), so force it into D0 in case the + * driver's "freeze" callbacks put it into a low-power state directly. + */ + pci_set_power_state(pci_dev, PCI_D0); pci_restore_state(pci_dev); if (drv && drv->pm && drv->pm->thaw_noirq) -- cgit v1.2.3-71-gd317 From ccc153a6de1f7741b5ef7c996f9be133772b2092 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 11 Dec 2017 14:19:00 +0100 Subject: cpufreq: imx6q: fix speed grading regression on i.MX6 QuadPlus The commit moving the speed grading check to the cpufreq driver introduced some additional checks, so the OPP disable is only attempted on SoCs where those OPPs are present. The compatible checks are missing the QuadPlus compatible, so invalid OPPs are not correctly disabled there. Move both checks to a single condition, so we don't need to sprinkle even more calls to of_machine_is_compatible(). Fixes: 2b3d58a3adca (cpufreq: imx6q: Move speed grading check to cpufreq driver) Signed-off-by: Lucas Stach Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/imx6q-cpufreq.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 628fe899cb48..d9b2c2de49c4 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -226,17 +226,18 @@ static void imx6q_opp_check_speed_grading(struct device *dev) val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && - of_machine_is_compatible("fsl,imx6q")) - if (dev_pm_opp_disable(dev, 1200000000)) - dev_warn(dev, "failed to disable 1.2GHz OPP\n"); if (val < OCOTP_CFG3_SPEED_996MHZ) if (dev_pm_opp_disable(dev, 996000000)) dev_warn(dev, "failed to disable 996MHz OPP\n"); - if (of_machine_is_compatible("fsl,imx6q")) { + + if (of_machine_is_compatible("fsl,imx6q") || + of_machine_is_compatible("fsl,imx6qp")) { if (val != OCOTP_CFG3_SPEED_852MHZ) if (dev_pm_opp_disable(dev, 852000000)) dev_warn(dev, "failed to disable 852MHz OPP\n"); + if (val != OCOTP_CFG3_SPEED_1P2GHZ) + if (dev_pm_opp_disable(dev, 1200000000)) + dev_warn(dev, "failed to disable 1.2GHz OPP\n"); } iounmap(base); put_node: -- cgit v1.2.3-71-gd317 From 56026645e2b6f11ede34a5e6ab69d3eb56f9c8fc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 18 Dec 2017 02:15:32 +0100 Subject: cpufreq: governor: Ensure sufficiently large sampling intervals After commit aa7519af450d (cpufreq: Use transition_delay_us for legacy governors as well) the sampling_rate field of struct dbs_data may be less than the tick period which causes dbs_update() to produce incorrect results, so make the code ensure that the value of that field will always be sufficiently large. Fixes: aa7519af450d (cpufreq: Use transition_delay_us for legacy governors as well) Reported-by: Andy Tang Reported-by: Doug Smythies Tested-by: Andy Tang Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar --- drivers/cpufreq/cpufreq_governor.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 58d4f4e1ad6a..ca38229b045a 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -22,6 +22,8 @@ #include "cpufreq_governor.h" +#define CPUFREQ_DBS_MIN_SAMPLING_INTERVAL (2 * TICK_NSEC / NSEC_PER_USEC) + static DEFINE_PER_CPU(struct cpu_dbs_info, cpu_dbs); static DEFINE_MUTEX(gov_dbs_data_mutex); @@ -47,11 +49,15 @@ ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf, { struct dbs_data *dbs_data = to_dbs_data(attr_set); struct policy_dbs_info *policy_dbs; + unsigned int sampling_interval; int ret; - ret = sscanf(buf, "%u", &dbs_data->sampling_rate); - if (ret != 1) + + ret = sscanf(buf, "%u", &sampling_interval); + if (ret != 1 || sampling_interval < CPUFREQ_DBS_MIN_SAMPLING_INTERVAL) return -EINVAL; + dbs_data->sampling_rate = sampling_interval; + /* * We are operating under dbs_data->mutex and so the list and its * entries can't be freed concurrently. @@ -430,7 +436,14 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy) if (ret) goto free_policy_dbs_info; - dbs_data->sampling_rate = cpufreq_policy_transition_delay_us(policy); + /* + * The sampling interval should not be less than the transition latency + * of the CPU and it also cannot be too small for dbs_update() to work + * correctly. + */ + dbs_data->sampling_rate = max_t(unsigned int, + CPUFREQ_DBS_MIN_SAMPLING_INTERVAL, + cpufreq_policy_transition_delay_us(policy)); if (!have_governor_per_policy()) gov->gdbs_data = dbs_data; -- cgit v1.2.3-71-gd317 From 951ef0e19f0736b45d1c4d81f4dfa04a43f87df5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 8 Dec 2017 23:59:49 +0000 Subject: ACPI: CPPC: remove initial assignment of pcc_ss_data The initialization of pcc_ss_data from pcc_data[pcc_ss_id] before pcc_ss_id is being range checked could lead to an out-of-bounds array read. This very same initialization is also being performed after the range check on pcc_ss_id, so we can just remove this problematic and also redundant assignment to fix the issue. Detected by cppcheck: warning: Value stored to 'pcc_ss_data' during its initialization is never read Fixes: 85b1407bf6d2 (ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs) Signed-off-by: Colin Ian King Signed-off-by: Rafael J. Wysocki --- drivers/acpi/cppc_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 30e84cc600ae..06ea4749ebd9 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -1171,7 +1171,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); struct cpc_register_resource *desired_reg; int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); - struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; + struct cppc_pcc_data *pcc_ss_data; int ret = 0; if (!cpc_desc || pcc_ss_id < 0) { -- cgit v1.2.3-71-gd317 From bb82e0b4a7e96494f0c1004ce50cec3d7b5fb3d1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 14 Dec 2017 13:31:16 +0100 Subject: ACPI: APEI / ERST: Fix missing error handling in erst_reader() The commit f6f828513290 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f828513290 (pstore: pass allocated memory region back to caller) Cc: All applicable Tested-by: Jerry Tang Signed-off-by: Takashi Iwai Acked-by: Kees Cook Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/erst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 6742f6c68034..9bff853e85f3 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -1007,7 +1007,7 @@ skip: /* The record may be cleared by others, try read next record */ if (len == -ENOENT) goto skip; - else if (len < sizeof(*rcd)) { + else if (len < 0 || len < sizeof(*rcd)) { rc = -EIO; goto out; } -- cgit v1.2.3-71-gd317 From 869b5567e12f63ea7407f81728ca87f8c0abbfdb Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Tue, 14 Nov 2017 06:53:32 -0700 Subject: vmbus: unregister device_obj->channels_kset Without the patch, a device can't be thoroughly destroyed, because vmbus_device_register() -> kset_create_and_add() still holds a reference to the hv_device's device.kobj. Signed-off-by: Dexuan Cui Cc: Stephen Hemminger Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 76ed9a216f10..610223f0e945 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1378,6 +1378,8 @@ void vmbus_device_unregister(struct hv_device *device_obj) pr_debug("child device %s unregistered\n", dev_name(&device_obj->device)); + kset_unregister(device_obj->channels_kset); + /* * Kick off the process of unregistering the device. * This will call vmbus_remove() and eventually vmbus_device_release() -- cgit v1.2.3-71-gd317 From 7f3dc0088b98533f17128058fac73cd8b2752ef1 Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Mon, 27 Nov 2017 09:32:33 -0800 Subject: binder: fix proc->files use-after-free proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos Cc: stable # 4.14 Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 44 +++++++++++++++++++++++++++++++------------- 1 file changed, 31 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/android/binder.c b/drivers/android/binder.c index bccec9de0533..a7ecfde66b7b 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -482,7 +482,8 @@ enum binder_deferred_state { * @tsk task_struct for group_leader of process * (invariant after initialized) * @files files_struct for process - * (invariant after initialized) + * (protected by @files_lock) + * @files_lock mutex to protect @files * @deferred_work_node: element for binder_deferred_list * (protected by binder_deferred_lock) * @deferred_work: bitmap of deferred work to perform @@ -530,6 +531,7 @@ struct binder_proc { int pid; struct task_struct *tsk; struct files_struct *files; + struct mutex files_lock; struct hlist_node deferred_work_node; int deferred_work; bool is_dead; @@ -877,20 +879,26 @@ static void binder_inc_node_tmpref_ilocked(struct binder_node *node); static int task_get_unused_fd_flags(struct binder_proc *proc, int flags) { - struct files_struct *files = proc->files; unsigned long rlim_cur; unsigned long irqs; + int ret; - if (files == NULL) - return -ESRCH; - - if (!lock_task_sighand(proc->tsk, &irqs)) - return -EMFILE; - + mutex_lock(&proc->files_lock); + if (proc->files == NULL) { + ret = -ESRCH; + goto err; + } + if (!lock_task_sighand(proc->tsk, &irqs)) { + ret = -EMFILE; + goto err; + } rlim_cur = task_rlimit(proc->tsk, RLIMIT_NOFILE); unlock_task_sighand(proc->tsk, &irqs); - return __alloc_fd(files, 0, rlim_cur, flags); + ret = __alloc_fd(proc->files, 0, rlim_cur, flags); +err: + mutex_unlock(&proc->files_lock); + return ret; } /* @@ -899,8 +907,10 @@ static int task_get_unused_fd_flags(struct binder_proc *proc, int flags) static void task_fd_install( struct binder_proc *proc, unsigned int fd, struct file *file) { + mutex_lock(&proc->files_lock); if (proc->files) __fd_install(proc->files, fd, file); + mutex_unlock(&proc->files_lock); } /* @@ -910,9 +920,11 @@ static long task_close_fd(struct binder_proc *proc, unsigned int fd) { int retval; - if (proc->files == NULL) - return -ESRCH; - + mutex_lock(&proc->files_lock); + if (proc->files == NULL) { + retval = -ESRCH; + goto err; + } retval = __close_fd(proc->files, fd); /* can't restart close syscall because file table entry was cleared */ if (unlikely(retval == -ERESTARTSYS || @@ -920,7 +932,8 @@ static long task_close_fd(struct binder_proc *proc, unsigned int fd) retval == -ERESTARTNOHAND || retval == -ERESTART_RESTARTBLOCK)) retval = -EINTR; - +err: + mutex_unlock(&proc->files_lock); return retval; } @@ -4627,7 +4640,9 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) ret = binder_alloc_mmap_handler(&proc->alloc, vma); if (ret) return ret; + mutex_lock(&proc->files_lock); proc->files = get_files_struct(current); + mutex_unlock(&proc->files_lock); return 0; err_bad_arg: @@ -4651,6 +4666,7 @@ static int binder_open(struct inode *nodp, struct file *filp) spin_lock_init(&proc->outer_lock); get_task_struct(current->group_leader); proc->tsk = current->group_leader; + mutex_init(&proc->files_lock); INIT_LIST_HEAD(&proc->todo); proc->default_priority = task_nice(current); binder_dev = container_of(filp->private_data, struct binder_device, @@ -4903,9 +4919,11 @@ static void binder_deferred_func(struct work_struct *work) files = NULL; if (defer & BINDER_DEFERRED_PUT_FILES) { + mutex_lock(&proc->files_lock); files = proc->files; if (files) proc->files = NULL; + mutex_unlock(&proc->files_lock); } if (defer & BINDER_DEFERRED_FLUSH) -- cgit v1.2.3-71-gd317 From c505873eaece2b4aefd07d339dc7e1400e0235ac Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Mon, 18 Dec 2017 10:26:43 +0800 Subject: net: phy: marvell: Limit 88m1101 autoneg errata to 88E1145 as well. 88E1145 also need this autoneg errata. Fixes: f2899788353c ("net: phy: marvell: Limit errata to 88m1101") Signed-off-by: Zhao Qiang Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b5a8f750e433..26c9a11220ca 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -2073,7 +2073,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1145_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1101_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, -- cgit v1.2.3-71-gd317 From ac3241d5c81bf6e85095481435f29a4627ff820e Mon Sep 17 00:00:00 2001 From: Hemanth Puranik Date: Mon, 18 Dec 2017 11:27:47 +0530 Subject: net: qcom/emac: Change the order of mac up and sgmii open This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik Acked-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 70c92b649b29..38c924bdd32e 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -253,18 +253,18 @@ static int emac_open(struct net_device *netdev) return ret; } - ret = emac_mac_up(adpt); + ret = adpt->phy.open(adpt); if (ret) { emac_mac_rx_tx_rings_free_all(adpt); free_irq(irq->irq, irq); return ret; } - ret = adpt->phy.open(adpt); + ret = emac_mac_up(adpt); if (ret) { - emac_mac_down(adpt); emac_mac_rx_tx_rings_free_all(adpt); free_irq(irq->irq, irq); + adpt->phy.close(adpt); return ret; } -- cgit v1.2.3-71-gd317 From 6623c0fba10ef45b64ca213ad5dec926f37fa9a0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 15 Dec 2017 16:10:20 +0000 Subject: net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151x Observed on the 88e1512 in SGMII-to-Copper mode, negotiating pause is unreliable. While the pause bits can be set in the advertisment register, they clear shortly after negotiation with a link partner commences irrespective of the cause of the negotiation. While these bits may be correctly conveyed to the link partner on the first negotiation, a subsequent negotiation (eg, due to negotiation restart by the link partner, or reconnection of the cable) will result in the link partner seeing these bits as zero, while the kernel believes that it has advertised pause modes. This leads to the local kernel evaluating (eg) symmetric pause mode, while the remote end evaluates that we have no pause mode capability. Since we can't guarantee the advertisment, disable pause mode support with this PHY when used in SGMII-to-Copper mode. The 88e1510 in RGMII-to-Copper mode appears to behave correctly. Reviewed-by: Andrew Lunn Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 26c9a11220ca..82104edca393 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -879,6 +879,8 @@ static int m88e1510_config_init(struct phy_device *phydev) /* SGMII-to-Copper mode initialization */ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + u32 pause; + /* Select page 18 */ err = marvell_set_page(phydev, 18); if (err < 0) @@ -902,6 +904,16 @@ static int m88e1510_config_init(struct phy_device *phydev) err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE); if (err < 0) return err; + + /* There appears to be a bug in the 88e1512 when used in + * SGMII to copper mode, where the AN advertisment register + * clears the pause bits each time a negotiation occurs. + * This means we can never be truely sure what was advertised, + * so disable Pause support. + */ + pause = SUPPORTED_Pause | SUPPORTED_Asym_Pause; + phydev->supported &= ~pause; + phydev->advertising &= ~pause; } return m88e1121_config_init(phydev); -- cgit v1.2.3-71-gd317 From ab14436065c8066c265540312742390d6d07ddd2 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 16 Dec 2017 00:52:39 +0300 Subject: net: phy: xgene: disable clk on error paths There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/phy/mdio-xgene.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c index bfd3090fb055..07c6048200c6 100644 --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -194,8 +194,11 @@ static int xgene_mdio_reset(struct xgene_mdio_pdata *pdata) } ret = xgene_enet_ecc_init(pdata); - if (ret) + if (ret) { + if (pdata->dev->of_node) + clk_disable_unprepare(pdata->clk); return ret; + } xgene_gmac_reset(pdata); return 0; @@ -388,8 +391,10 @@ static int xgene_mdio_probe(struct platform_device *pdev) return ret; mdio_bus = mdiobus_alloc(); - if (!mdio_bus) - return -ENOMEM; + if (!mdio_bus) { + ret = -ENOMEM; + goto out_clk; + } mdio_bus->name = "APM X-Gene MDIO bus"; @@ -418,7 +423,7 @@ static int xgene_mdio_probe(struct platform_device *pdev) mdio_bus->phy_mask = ~0; ret = mdiobus_register(mdio_bus); if (ret) - goto out; + goto out_mdiobus; acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1, acpi_register_phy, NULL, mdio_bus, NULL); @@ -426,16 +431,20 @@ static int xgene_mdio_probe(struct platform_device *pdev) } if (ret) - goto out; + goto out_mdiobus; pdata->mdio_bus = mdio_bus; xgene_mdio_status = true; return 0; -out: +out_mdiobus: mdiobus_free(mdio_bus); +out_clk: + if (dev->of_node) + clk_disable_unprepare(pdata->clk); + return ret; } -- cgit v1.2.3-71-gd317 From 0abc2a10389f0c9070f76ca906c7382788036b93 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 18 Dec 2017 15:40:44 +0800 Subject: block: fix blk_rq_append_bio Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b02476e3 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig Reported-by: Michele Ballabio (handling failure of blk_rq_append_bio(), only call bio_get() after blk_rq_append_bio() returns OK) Tested-by: Michele Ballabio Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-map.c | 38 ++++++++++++++++++++++---------------- drivers/scsi/osd/osd_initiator.c | 4 +++- drivers/target/target_core_pscsi.c | 4 ++-- include/linux/blkdev.h | 2 +- 4 files changed, 28 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/block/blk-map.c b/block/blk-map.c index b21f8e86f120..d3a94719f03f 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -12,22 +12,29 @@ #include "blk.h" /* - * Append a bio to a passthrough request. Only works can be merged into - * the request based on the driver constraints. + * Append a bio to a passthrough request. Only works if the bio can be merged + * into the request based on the driver constraints. */ -int blk_rq_append_bio(struct request *rq, struct bio *bio) +int blk_rq_append_bio(struct request *rq, struct bio **bio) { - blk_queue_bounce(rq->q, &bio); + struct bio *orig_bio = *bio; + + blk_queue_bounce(rq->q, bio); if (!rq->bio) { - blk_rq_bio_prep(rq->q, rq, bio); + blk_rq_bio_prep(rq->q, rq, *bio); } else { - if (!ll_back_merge_fn(rq->q, rq, bio)) + if (!ll_back_merge_fn(rq->q, rq, *bio)) { + if (orig_bio != *bio) { + bio_put(*bio); + *bio = orig_bio; + } return -EINVAL; + } - rq->biotail->bi_next = bio; - rq->biotail = bio; - rq->__data_len += bio->bi_iter.bi_size; + rq->biotail->bi_next = *bio; + rq->biotail = *bio; + rq->__data_len += (*bio)->bi_iter.bi_size; } return 0; @@ -73,14 +80,12 @@ static int __blk_rq_map_user_iov(struct request *rq, * We link the bounce buffer in and could have to traverse it * later so we have to get a ref to prevent it from being freed */ - ret = blk_rq_append_bio(rq, bio); - bio_get(bio); + ret = blk_rq_append_bio(rq, &bio); if (ret) { - bio_endio(bio); __blk_rq_unmap_user(orig_bio); - bio_put(bio); return ret; } + bio_get(bio); return 0; } @@ -213,7 +218,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf, int reading = rq_data_dir(rq) == READ; unsigned long addr = (unsigned long) kbuf; int do_copy = 0; - struct bio *bio; + struct bio *bio, *orig_bio; int ret; if (len > (queue_max_hw_sectors(q) << 9)) @@ -236,10 +241,11 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf, if (do_copy) rq->rq_flags |= RQF_COPY_USER; - ret = blk_rq_append_bio(rq, bio); + orig_bio = bio; + ret = blk_rq_append_bio(rq, &bio); if (unlikely(ret)) { /* request is too big */ - bio_put(bio); + bio_put(orig_bio); return ret; } diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index a4f28b7e4c65..e18877177f1b 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -1576,7 +1576,9 @@ static struct request *_make_request(struct request_queue *q, bool has_write, return req; for_each_bio(bio) { - ret = blk_rq_append_bio(req, bio); + struct bio *bounce_bio = bio; + + ret = blk_rq_append_bio(req, &bounce_bio); if (ret) return ERR_PTR(ret); } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 7c69b4a9694d..0d99b242e82e 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -920,7 +920,7 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents, " %d i: %d bio: %p, allocating another" " bio\n", bio->bi_vcnt, i, bio); - rc = blk_rq_append_bio(req, bio); + rc = blk_rq_append_bio(req, &bio); if (rc) { pr_err("pSCSI: failed to append bio\n"); goto fail; @@ -938,7 +938,7 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents, } if (bio) { - rc = blk_rq_append_bio(req, bio); + rc = blk_rq_append_bio(req, &bio); if (rc) { pr_err("pSCSI: failed to append bio\n"); goto fail; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index abd06f540863..100d0df38026 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -965,7 +965,7 @@ extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src, extern void blk_rq_unprep_clone(struct request *rq); extern blk_status_t blk_insert_cloned_request(struct request_queue *q, struct request *rq); -extern int blk_rq_append_bio(struct request *rq, struct bio *bio); +extern int blk_rq_append_bio(struct request *rq, struct bio **bio); extern void blk_delay_queue(struct request_queue *, unsigned long); extern void blk_queue_split(struct request_queue *, struct bio **); extern void blk_recount_segments(struct request_queue *, struct bio *); -- cgit v1.2.3-71-gd317 From 34112bf4935dabe3c1d1fd42842ed771e279bf61 Mon Sep 17 00:00:00 2001 From: Karol Herbst Date: Mon, 6 Nov 2017 16:20:33 +0100 Subject: drm/nouveau/fbcon: fix NULL pointer access in nouveau_fbcon_destroy When the fbcon object is initialized, but nouveau_fbcon_create is not called, we run into a NULL pointer access within nouveau_fbcon_create when unloading nouveau. The call to drm_fb_helper_funcs.fb_probe is deferred until there is a display for real since 4.14, that's why fbcon->helper.fb is still not set. Signed-off-by: Karol Herbst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index c533d8e04afc..be7357bf2246 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -429,7 +429,7 @@ nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *fbcon) drm_fb_helper_unregister_fbi(&fbcon->helper); drm_fb_helper_fini(&fbcon->helper); - if (nouveau_fb->nvbo) { + if (nouveau_fb && nouveau_fb->nvbo) { nouveau_vma_del(&nouveau_fb->vma); nouveau_bo_unmap(nouveau_fb->nvbo); nouveau_bo_unpin(nouveau_fb->nvbo); -- cgit v1.2.3-71-gd317 From f60707a69a225f2dd87f42628b44e24ceb219d28 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 7 Dec 2017 10:49:35 +1000 Subject: drm/nouveau/bios/dp: support DP Info Table 2.0 Reported-by: Hans de Goede Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/bios/dp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/dp.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/dp.c index 972370ed36f0..7c7efa4ea0d0 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/dp.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/dp.c @@ -36,6 +36,7 @@ nvbios_dp_table(struct nvkm_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len) if (data) { *ver = nvbios_rd08(bios, data + 0x00); switch (*ver) { + case 0x20: case 0x21: case 0x30: case 0x40: @@ -63,6 +64,7 @@ nvbios_dpout_entry(struct nvkm_bios *bios, u8 idx, if (data && idx < *cnt) { u16 outp = nvbios_rd16(bios, data + *hdr + idx * *len); switch (*ver * !!outp) { + case 0x20: case 0x21: case 0x30: *hdr = nvbios_rd08(bios, data + 0x04); @@ -96,12 +98,16 @@ nvbios_dpout_parse(struct nvkm_bios *bios, u8 idx, info->type = nvbios_rd16(bios, data + 0x00); info->mask = nvbios_rd16(bios, data + 0x02); switch (*ver) { + case 0x20: + info->mask |= 0x00c0; /* match any link */ + /* fall-through */ case 0x21: case 0x30: info->flags = nvbios_rd08(bios, data + 0x05); info->script[0] = nvbios_rd16(bios, data + 0x06); info->script[1] = nvbios_rd16(bios, data + 0x08); - info->lnkcmp = nvbios_rd16(bios, data + 0x0a); + if (*len >= 0x0c) + info->lnkcmp = nvbios_rd16(bios, data + 0x0a); if (*len >= 0x0f) { info->script[2] = nvbios_rd16(bios, data + 0x0c); info->script[3] = nvbios_rd16(bios, data + 0x0e); @@ -170,6 +176,7 @@ nvbios_dpcfg_parse(struct nvkm_bios *bios, u16 outp, u8 idx, memset(info, 0x00, sizeof(*info)); if (data) { switch (*ver) { + case 0x20: case 0x21: info->dc = nvbios_rd08(bios, data + 0x02); info->pe = nvbios_rd08(bios, data + 0x03); -- cgit v1.2.3-71-gd317 From 81a24b9ae8eea95b74337c253059da761043ed06 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 7 Dec 2017 11:08:52 +1000 Subject: drm/nouveau/imem/nv50: fix refcount_t warning Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c index 1ba7289684aa..db48a1daca0c 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c @@ -249,7 +249,7 @@ nv50_instobj_acquire(struct nvkm_memory *memory) iobj->base.memory.ptrs = &nv50_instobj_fast; else iobj->base.memory.ptrs = &nv50_instobj_slow; - refcount_inc(&iobj->maps); + refcount_set(&iobj->maps, 1); } mutex_unlock(&imem->subdev.mutex); -- cgit v1.2.3-71-gd317 From a121027d2747168df0aac0c3da35509eea39f61c Mon Sep 17 00:00:00 2001 From: Karol Herbst Date: Fri, 24 Nov 2017 03:56:26 +0100 Subject: drm/nouveau/pci: do a msi rearm on init On my GP107 when I load nouveau after unloading it, for some reason the GPU stopped sending or the CPU stopped receiving interrupts if MSI was enabled. Doing a rearm once before getting any interrupts fixes this. Signed-off-by: Karol Herbst Reviewed-by: Thierry Reding Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c index b1b1f3626b96..deb96de54b00 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c @@ -136,6 +136,13 @@ nvkm_pci_init(struct nvkm_subdev *subdev) return ret; pci->irq = pdev->irq; + + /* Ensure MSI interrupts are armed, for the case where there are + * already interrupts pending (for whatever reason) at load time. + */ + if (pci->msi) + pci->func->msi_rearm(pci); + return ret; } -- cgit v1.2.3-71-gd317 From 6cb0f2a39d3b7ccdd7269af4ddadb38e78aee744 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 7 Dec 2017 15:04:32 +1000 Subject: drm/nouveau/mmu/gp10b: use correct implementation Reported-by: Mikko Perttunen Fixes: 6359c98224 ("drm/nouveau/mmu/gp10b: fork from gf100") Signed-off-by: Ben Skeggs Tested-by: Thierry Reding --- drivers/gpu/drm/nouveau/nvkm/engine/device/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c index e14643615698..00eeaaffeae5 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c @@ -2369,7 +2369,7 @@ nv13b_chipset = { .imem = gk20a_instmem_new, .ltc = gp100_ltc_new, .mc = gp10b_mc_new, - .mmu = gf100_mmu_new, + .mmu = gp10b_mmu_new, .secboot = gp10b_secboot_new, .pmu = gm20b_pmu_new, .timer = gk20a_timer_new, -- cgit v1.2.3-71-gd317 From f29f18eb952bc3e71deedf8bd8fc902f66853c48 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 7 Dec 2017 15:25:14 +1000 Subject: drm/nouveau: avoid GPU page sizes > PAGE_SIZE for buffer objects in host memory While the Tegra (GK20A, GM20B, GP10B) MMUs support large pages in host memory, we're currently lacking IOMMU support for merging system pages into large enough chunks to be mapped as such by the GPU. The core VMM code actually supports automatically determining the best page size to map with, which is intended for these situations, but for various complicated reasons the DRM is currently forcing the page size selection on a per-BO basis. This should fix breakage reported on Tegra GPUs in the meantime, until one or both of the above issues are resolved properly. Reported-by: Mikko Perttunen Fixes: 7dc6a446da7c ("drm/nouveau: improve selection of GPU page size") Signed-off-by: Ben Skeggs Tested-by: Thierry Reding --- drivers/gpu/drm/nouveau/nouveau_bo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 2615912430cc..42c1827bbb8e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -262,7 +262,8 @@ nouveau_bo_new(struct nouveau_cli *cli, u64 size, int align, if (cli->device.info.family > NV_DEVICE_INFO_V0_CURIE && (flags & TTM_PL_FLAG_VRAM) && !vmm->page[i].vram) continue; - if ((flags & TTM_PL_FLAG_TT ) && !vmm->page[i].host) + if ((flags & TTM_PL_FLAG_TT) && + (!vmm->page[i].host || vmm->page[i].shift > PAGE_SHIFT)) continue; /* Select this page size if it's the first that supports -- cgit v1.2.3-71-gd317 From 74a39954a4900a7dea7010e3063e2bf16b23934b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 14 Dec 2017 11:19:27 +1000 Subject: drm/nouveau: use alternate memory type for system-memory buffers with kind != 0 Fixes bug on Tegra where we'd strip kind information from system memory (ie. all) buffers, resulting in misrendering. Behaviour on dGPU should be unchanged. Reported-by: Thierry Reding Fixes: d7722134b8 ("drm/nouveau: switch over to new memory and vmm interfaces") Signed-off-by: Ben Skeggs Tested-by: Thierry Reding --- drivers/gpu/drm/nouveau/nouveau_bo.c | 2 +- drivers/gpu/drm/nouveau/nouveau_drv.h | 11 ++++++++-- drivers/gpu/drm/nouveau/nouveau_mem.c | 6 +++--- drivers/gpu/drm/nouveau/nouveau_ttm.c | 39 ++++++++++++++++++++++++++--------- 4 files changed, 42 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 42c1827bbb8e..435ff8662cfa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -224,7 +224,7 @@ nouveau_bo_new(struct nouveau_cli *cli, u64 size, int align, /* Determine if we can get a cache-coherent map, forcing * uncached mapping if we can't. */ - if (mmu->type[drm->ttm.type_host].type & NVIF_MEM_UNCACHED) + if (!nouveau_drm_use_coherent_gpu_mapping(drm)) nvbo->force_coherent = true; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index e86b8220a4bb..6a1b1debe5b8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -156,8 +156,8 @@ struct nouveau_drm { struct nvif_object copy; int mtrr; int type_vram; - int type_host; - int type_ncoh; + int type_host[2]; + int type_ncoh[2]; } ttm; /* GEM interface support */ @@ -216,6 +216,13 @@ nouveau_drm(struct drm_device *dev) return dev->dev_private; } +static inline bool +nouveau_drm_use_coherent_gpu_mapping(struct nouveau_drm *drm) +{ + struct nvif_mmu *mmu = &drm->client.mmu; + return !(mmu->type[drm->ttm.type_host[0]].type & NVIF_MEM_UNCACHED); +} + int nouveau_pmops_suspend(struct device *); int nouveau_pmops_resume(struct device *); bool nouveau_pmops_runtime(void); diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 589a9621db76..c002f8968507 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -103,10 +103,10 @@ nouveau_mem_host(struct ttm_mem_reg *reg, struct ttm_dma_tt *tt) u8 type; int ret; - if (mmu->type[drm->ttm.type_host].type & NVIF_MEM_UNCACHED) - type = drm->ttm.type_ncoh; + if (!nouveau_drm_use_coherent_gpu_mapping(drm)) + type = drm->ttm.type_ncoh[!!mem->kind]; else - type = drm->ttm.type_host; + type = drm->ttm.type_host[0]; if (mem->kind && !(mmu->type[type].type & NVIF_MEM_KIND)) mem->comp = mem->kind = 0; diff --git a/drivers/gpu/drm/nouveau/nouveau_ttm.c b/drivers/gpu/drm/nouveau/nouveau_ttm.c index 08b974b30482..dff51a0ee028 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ttm.c +++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c @@ -235,27 +235,46 @@ nouveau_ttm_global_release(struct nouveau_drm *drm) drm->ttm.mem_global_ref.release = NULL; } -int -nouveau_ttm_init(struct nouveau_drm *drm) +static int +nouveau_ttm_init_host(struct nouveau_drm *drm, u8 kind) { - struct nvkm_device *device = nvxx_device(&drm->client.device); - struct nvkm_pci *pci = device->pci; struct nvif_mmu *mmu = &drm->client.mmu; - struct drm_device *dev = drm->dev; - int typei, ret; + int typei; typei = nvif_mmu_type(mmu, NVIF_MEM_HOST | NVIF_MEM_MAPPABLE | - NVIF_MEM_COHERENT); + kind | NVIF_MEM_COHERENT); if (typei < 0) return -ENOSYS; - drm->ttm.type_host = typei; + drm->ttm.type_host[!!kind] = typei; - typei = nvif_mmu_type(mmu, NVIF_MEM_HOST | NVIF_MEM_MAPPABLE); + typei = nvif_mmu_type(mmu, NVIF_MEM_HOST | NVIF_MEM_MAPPABLE | kind); if (typei < 0) return -ENOSYS; - drm->ttm.type_ncoh = typei; + drm->ttm.type_ncoh[!!kind] = typei; + return 0; +} + +int +nouveau_ttm_init(struct nouveau_drm *drm) +{ + struct nvkm_device *device = nvxx_device(&drm->client.device); + struct nvkm_pci *pci = device->pci; + struct nvif_mmu *mmu = &drm->client.mmu; + struct drm_device *dev = drm->dev; + int typei, ret; + + ret = nouveau_ttm_init_host(drm, 0); + if (ret) + return ret; + + if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA && + drm->client.device.info.chipset != 0x50) { + ret = nouveau_ttm_init_host(drm, NVIF_MEM_KIND); + if (ret) + return ret; + } if (drm->client.device.info.platform != NV_DEVICE_INFO_V0_SOC && drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA) { -- cgit v1.2.3-71-gd317 From 81b6c999897919d5a16fedc018fe375dbab091c5 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 13 Dec 2017 14:21:37 +0100 Subject: scsi: core: check for device state in __scsi_remove_target() As it turned out device_get() doesn't use kref_get_unless_zero(), so we will be always getting a device pointer. Consequently, we need to check for the device state in __scsi_remove_target() to avoid tripping over deleted objects. Fixes: fbce4d97fd43 ("scsi: fixup kernel warning during rmmod()") Reported-by: Jason Yan Signed-off-by: Hannes Reinecke Reviewed-by: Bart Van Assche Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_sysfs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index a9996c16f4ae..26ce17178401 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1415,7 +1415,10 @@ static void __scsi_remove_target(struct scsi_target *starget) * check. */ if (sdev->channel != starget->channel || - sdev->id != starget->id || + sdev->id != starget->id) + continue; + if (sdev->sdev_state == SDEV_DEL || + sdev->sdev_state == SDEV_CANCEL || !get_device(&sdev->sdev_gendev)) continue; spin_unlock_irqrestore(shost->host_lock, flags); -- cgit v1.2.3-71-gd317 From b65c7b8aeac818eb8f80ce825073c12ad081b177 Mon Sep 17 00:00:00 2001 From: Adiel Aloni Date: Mon, 18 Dec 2017 12:14:04 +0200 Subject: mac80211_hwsim: enable TODS BIT in null data frame Same as in ieee80211_nullfunc_get, enable the TODS bit, otherwise the nullfunc packet will not be handled in ap rx path. (will be dropped in ieee80211_accept_frame()). Signed-off-by: Adiel Aloni Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 10b075a46b26..59b0cedcdf7b 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -684,6 +684,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac, hdr = skb_put(skb, sizeof(*hdr) - ETH_ALEN); hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | + IEEE80211_FCTL_TODS | (ps ? IEEE80211_FCTL_PM : 0)); hdr->duration_id = cpu_to_le16(0); memcpy(hdr->addr1, vp->bssid, ETH_ALEN); -- cgit v1.2.3-71-gd317 From 162bd5e5fd921785077b5862d8f2ffabe2fe11e5 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 12 Dec 2017 17:26:36 +0800 Subject: mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl The driver may sleep under a spinlock. The function call path is: hwsim_get_radio_nl (acquire the spinlock) nlmsg_new(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 59b0cedcdf7b..e8189c07b41f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3216,7 +3216,7 @@ static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info) if (!net_eq(wiphy_net(data->hw->wiphy), genl_info_net(info))) continue; - skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!skb) { res = -ENOMEM; goto out_err; -- cgit v1.2.3-71-gd317 From 92411f6d7f1afcc95e54295d40e96a75385212ec Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 7 Dec 2017 16:58:50 +0100 Subject: drm/sun4i: Fix error path handling The commit 4c7f16d14a33 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") moved a bunch of logic around, but forgot to update the gotos after the introduction of the err_free_dotclock label. It means that if we fail later that the one introduced in that commit, we'll just to the old label which isn't free the clock we created. This will result in a breakage as soon as someone tries to do something with that clock, since its resources will have been long reclaimed. Cc: Fixes: 4c7f16d14a33 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index e122f5b2a395..f4284b51bdca 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -724,12 +724,12 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, if (IS_ERR(tcon->crtc)) { dev_err(dev, "Couldn't create our CRTC\n"); ret = PTR_ERR(tcon->crtc); - goto err_free_clocks; + goto err_free_dotclock; } ret = sun4i_rgb_init(drm, tcon); if (ret < 0) - goto err_free_clocks; + goto err_free_dotclock; if (tcon->quirks->needs_de_be_mux) { /* -- cgit v1.2.3-71-gd317 From 66e900a3d225575c8b48b59ae1fe74bb6e5a65cc Mon Sep 17 00:00:00 2001 From: Radu Pirea Date: Fri, 15 Dec 2017 17:40:17 +0200 Subject: spi: atmel: fixed spin_lock usage inside atmel_spi_remove The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by: Jia-Ju Bai Signed-off-by: Radu Pirea Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index f95da364c283..669470971023 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1661,12 +1661,12 @@ static int atmel_spi_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); /* reset the hardware and block queue progress */ - spin_lock_irq(&as->lock); if (as->use_dma) { atmel_spi_stop_dma(master); atmel_spi_release_dma(master); } + spin_lock_irq(&as->lock); spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); -- cgit v1.2.3-71-gd317 From 3920bb713038810f25770e7545b79f204685c8f2 Mon Sep 17 00:00:00 2001 From: "SZ Lin (林上智)" Date: Tue, 19 Dec 2017 17:40:32 +0800 Subject: USB: serial: option: adding support for YUGA CLM920-NC5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by: Taiyi Wu Signed-off-by: SZ Lin (林上智) Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b02fb576b856..b6320e3be429 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -233,6 +233,8 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Qualcomm's vendor ID */ #define QUECTEL_PRODUCT_UC20 0x9003 #define QUECTEL_PRODUCT_UC15 0x9090 +/* These Yuga products use Qualcomm's vendor ID */ +#define YUGA_PRODUCT_CLM920_NC5 0x9625 #define QUECTEL_VENDOR_ID 0x2c7c /* These Quectel products use Quectel's vendor ID */ @@ -680,6 +682,10 @@ static const struct option_blacklist_info cinterion_rmnet2_blacklist = { .reserved = BIT(4) | BIT(5), }; +static const struct option_blacklist_info yuga_clm920_nc5_blacklist = { + .reserved = BIT(1) | BIT(4), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1184,6 +1190,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + /* Yuga products use Qualcomm vendor ID */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5), + .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, -- cgit v1.2.3-71-gd317 From 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 19 Dec 2017 11:14:42 +0200 Subject: USB: Fix off by one in type-specific length check of BOS SSP capability USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a off by one in commit 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes the zero based SSAC as argument, not the actual count of sublink speed attributes. USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1." The type-specific length check patch was added to stable and needs to be fixed there as well Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") Cc: linux-stable CC: Masakazu Mokuno Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 78e92d29f8d9..c821b4b9647e 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1007,7 +1007,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) case USB_SSP_CAP_TYPE: ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; ssac = (le32_to_cpu(ssp_cap->bmAttributes) & - USB_SSP_SUBLINK_SPEED_ATTRIBS) + 1; + USB_SSP_SUBLINK_SPEED_ATTRIBS); if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) dev->bos->ssp_cap = ssp_cap; break; -- cgit v1.2.3-71-gd317 From 8272d099d05f7ab2776cf56a2ab9f9443be18907 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 18 Dec 2017 17:24:22 -0700 Subject: usbip: vhci: stop printing kernel pointer addresses in messages Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 10 ---------- drivers/usb/usbip/vhci_rx.c | 23 +++++++++++------------ drivers/usb/usbip/vhci_tx.c | 3 ++- 3 files changed, 13 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 6b3278c4b72a..9efab3dc3734 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -656,9 +656,6 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag struct vhci_device *vdev; unsigned long flags; - usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", - hcd, urb, mem_flags); - if (portnum > VHCI_HC_PORTS) { pr_err("invalid port number %d\n", portnum); return -ENODEV; @@ -822,8 +819,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) struct vhci_device *vdev; unsigned long flags; - pr_info("dequeue a urb %p\n", urb); - spin_lock_irqsave(&vhci->lock, flags); priv = urb->hcpriv; @@ -851,7 +846,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) /* tcp connection is closed */ spin_lock(&vdev->priv_lock); - pr_info("device %p seems to be disconnected\n", vdev); list_del(&priv->list); kfree(priv); urb->hcpriv = NULL; @@ -863,8 +857,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) * vhci_rx will receive RET_UNLINK and give back the URB. * Otherwise, we give back it here. */ - pr_info("gives back urb %p\n", urb); - usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&vhci->lock, flags); @@ -892,8 +884,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) unlink->unlink_seqnum = priv->seqnum; - pr_info("device %p seems to be still connected\n", vdev); - /* send cmd_unlink and try to cancel the pending URB in the * peer */ list_add_tail(&unlink->list, &vdev->unlink_tx); diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index 90577e8b2282..112ebb90d8c9 100644 --- a/drivers/usb/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c @@ -23,24 +23,23 @@ struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum) urb = priv->urb; status = urb->status; - usbip_dbg_vhci_rx("find urb %p vurb %p seqnum %u\n", - urb, priv, seqnum); + usbip_dbg_vhci_rx("find urb seqnum %u\n", seqnum); switch (status) { case -ENOENT: /* fall through */ case -ECONNRESET: - dev_info(&urb->dev->dev, - "urb %p was unlinked %ssynchronuously.\n", urb, - status == -ENOENT ? "" : "a"); + dev_dbg(&urb->dev->dev, + "urb seq# %u was unlinked %ssynchronuously\n", + seqnum, status == -ENOENT ? "" : "a"); break; case -EINPROGRESS: /* no info output */ break; default: - dev_info(&urb->dev->dev, - "urb %p may be in a error, status %d\n", urb, - status); + dev_dbg(&urb->dev->dev, + "urb seq# %u may be in a error, status %d\n", + seqnum, status); } list_del(&priv->list); @@ -67,8 +66,8 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, spin_unlock_irqrestore(&vdev->priv_lock, flags); if (!urb) { - pr_err("cannot find a urb of seqnum %u\n", pdu->base.seqnum); - pr_info("max seqnum %d\n", + pr_err("cannot find a urb of seqnum %u max seqnum %d\n", + pdu->base.seqnum, atomic_read(&vhci_hcd->seqnum)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; @@ -91,7 +90,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, if (usbip_dbg_flag_vhci_rx) usbip_dump_urb(urb); - usbip_dbg_vhci_rx("now giveback urb %p\n", urb); + usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum); spin_lock_irqsave(&vhci->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_hcd_to_hcd(vhci_hcd), urb); @@ -158,7 +157,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, pr_info("the urb (seqnum %d) was already given back\n", pdu->base.seqnum); } else { - usbip_dbg_vhci_rx("now giveback urb %p\n", urb); + usbip_dbg_vhci_rx("now giveback urb %d\n", pdu->base.seqnum); /* If unlink is successful, status is -ECONNRESET */ urb->status = pdu->u.ret_unlink.status; diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c index d625a2ff4b71..9aed15a358b7 100644 --- a/drivers/usb/usbip/vhci_tx.c +++ b/drivers/usb/usbip/vhci_tx.c @@ -69,7 +69,8 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev) memset(&msg, 0, sizeof(msg)); memset(&iov, 0, sizeof(iov)); - usbip_dbg_vhci_tx("setup txdata urb %p\n", urb); + usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n", + priv->seqnum); /* 1. setup usbip_header */ setup_cmd_submit_pdu(&pdu_header, urb); -- cgit v1.2.3-71-gd317 From 248a22044366f588d46754c54dfe29ffe4f8b4df Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 18 Dec 2017 17:23:37 -0700 Subject: usbip: stub: stop printing kernel pointer addresses in messages Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_main.c | 5 +++-- drivers/usb/usbip/stub_rx.c | 7 ++----- drivers/usb/usbip/stub_tx.c | 6 +++--- 3 files changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index 4f48b306713f..c31c8402a0c5 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -237,11 +237,12 @@ void stub_device_cleanup_urbs(struct stub_device *sdev) struct stub_priv *priv; struct urb *urb; - dev_dbg(&sdev->udev->dev, "free sdev %p\n", sdev); + dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n"); while ((priv = stub_priv_pop(sdev))) { urb = priv->urb; - dev_dbg(&sdev->udev->dev, "free urb %p\n", urb); + dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n", + priv->seqnum); usb_kill_urb(urb); kmem_cache_free(stub_priv_cache, priv); diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 493ac2928391..2f29be474098 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -211,9 +211,6 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev, if (priv->seqnum != pdu->u.cmd_unlink.seqnum) continue; - dev_info(&priv->urb->dev->dev, "unlink urb %p\n", - priv->urb); - /* * This matched urb is not completed yet (i.e., be in * flight in usb hcd hardware/driver). Now we are @@ -252,8 +249,8 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev, ret = usb_unlink_urb(priv->urb); if (ret != -EINPROGRESS) dev_err(&priv->urb->dev->dev, - "failed to unlink a urb %p, ret %d\n", - priv->urb, ret); + "failed to unlink a urb # %lu, ret %d\n", + priv->seqnum, ret); return 0; } diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index 53172b1f6257..f0ec41a50cbc 100644 --- a/drivers/usb/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c @@ -88,7 +88,7 @@ void stub_complete(struct urb *urb) /* link a urb to the queue of tx. */ spin_lock_irqsave(&sdev->priv_lock, flags); if (sdev->ud.tcp_socket == NULL) { - usbip_dbg_stub_tx("ignore urb for closed connection %p", urb); + usbip_dbg_stub_tx("ignore urb for closed connection\n"); /* It will be freed in stub_device_cleanup_urbs(). */ } else if (priv->unlinking) { stub_enqueue_ret_unlink(sdev, priv->seqnum, urb->status); @@ -190,8 +190,8 @@ static int stub_send_ret_submit(struct stub_device *sdev) /* 1. setup usbip_header */ setup_ret_submit_pdu(&pdu_header, urb); - usbip_dbg_stub_tx("setup txdata seqnum: %d urb: %p\n", - pdu_header.base.seqnum, urb); + usbip_dbg_stub_tx("setup txdata seqnum: %d\n", + pdu_header.base.seqnum); usbip_header_correct_endian(&pdu_header, 1); iov[iovnum].iov_base = &pdu_header; -- cgit v1.2.3-71-gd317 From 90120d15f4c397272aaf41077960a157fc4212bf Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 15 Dec 2017 10:50:09 -0700 Subject: usbip: prevent leaking socket pointer address in messages usbip driver is leaking socket pointer address in messages. Remove the messages that aren't useful and print sockfd in the ones that are useful for debugging. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_dev.c | 3 +-- drivers/usb/usbip/usbip_common.c | 16 +++++----------- drivers/usb/usbip/vhci_hcd.c | 2 +- 3 files changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index a3df8ee82faf..e31a6f204397 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -149,8 +149,7 @@ static void stub_shutdown_connection(struct usbip_device *ud) * step 1? */ if (ud->tcp_socket) { - dev_dbg(&sdev->udev->dev, "shutdown tcp_socket %p\n", - ud->tcp_socket); + dev_dbg(&sdev->udev->dev, "shutdown sockfd %d\n", ud->sockfd); kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); } diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index f7978933b402..7b219d9109b4 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -317,26 +317,20 @@ int usbip_recv(struct socket *sock, void *buf, int size) struct msghdr msg = {.msg_flags = MSG_NOSIGNAL}; int total = 0; + if (!sock || !buf || !size) + return -EINVAL; + iov_iter_kvec(&msg.msg_iter, READ|ITER_KVEC, &iov, 1, size); usbip_dbg_xmit("enter\n"); - if (!sock || !buf || !size) { - pr_err("invalid arg, sock %p buff %p size %d\n", sock, buf, - size); - return -EINVAL; - } - do { - int sz = msg_data_left(&msg); + msg_data_left(&msg); sock->sk->sk_allocation = GFP_NOIO; result = sock_recvmsg(sock, &msg, MSG_WAITALL); - if (result <= 0) { - pr_debug("receive sock %p buf %p size %u ret %d total %d\n", - sock, buf + total, sz, result, total); + if (result <= 0) goto err; - } total += result; } while (msg_data_left(&msg)); diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 9efab3dc3734..c3e1008aa491 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -965,7 +965,7 @@ static void vhci_shutdown_connection(struct usbip_device *ud) /* need this? see stub_dev.c */ if (ud->tcp_socket) { - pr_debug("shutdown tcp_socket %p\n", ud->tcp_socket); + pr_debug("shutdown tcp_socket %d\n", ud->sockfd); kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); } -- cgit v1.2.3-71-gd317 From 10c90120930628e8b959bf58d4a0aaef3ae5d945 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 15 Dec 2017 10:05:15 -0700 Subject: usbip: stub_rx: fix static checker warning on unnecessary checks Fix the following static checker warnings: The patch c6688ef9f297: "usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input" from Dec 7, 2017, leads to the following static checker warning: drivers/usb/usbip/stub_rx.c:346 get_pipe() warn: impossible condition '(pdu->u.cmd_submit.transfer_buffer_length > ((~0 >> 1))) => (s32min-s32max > s32max)' drivers/usb/usbip/stub_rx.c:486 stub_recv_cmd_submit() warn: always true condition '(pdu->u.cmd_submit.transfer_buffer_length <= ((~0 >> 1))) => (s32min-s32max <= s32max)' Reported-by: Dan Carpenter Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_rx.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 2f29be474098..6c5a59313999 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -339,14 +339,6 @@ static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu) epd = &ep->desc; - /* validate transfer_buffer_length */ - if (pdu->u.cmd_submit.transfer_buffer_length > INT_MAX) { - dev_err(&sdev->udev->dev, - "CMD_SUBMIT: -EMSGSIZE transfer_buffer_length %d\n", - pdu->u.cmd_submit.transfer_buffer_length); - return -1; - } - if (usb_endpoint_xfer_control(epd)) { if (dir == USBIP_DIR_OUT) return usb_sndctrlpipe(udev, epnum); @@ -479,8 +471,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, } /* allocate urb transfer buffer, if needed */ - if (pdu->u.cmd_submit.transfer_buffer_length > 0 && - pdu->u.cmd_submit.transfer_buffer_length <= INT_MAX) { + if (pdu->u.cmd_submit.transfer_buffer_length > 0) { priv->urb->transfer_buffer = kzalloc(pdu->u.cmd_submit.transfer_buffer_length, GFP_KERNEL); -- cgit v1.2.3-71-gd317 From b9096d9f15c142574ebebe8fbb137012bb9d99c2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 12 Dec 2017 16:11:30 +0100 Subject: usb: add RESET_RESUME for ELSA MicroLink 56K This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index a10b346b9777..95812656d9b9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -149,6 +149,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + /* ELSA MicroLink 56K */ + { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, -- cgit v1.2.3-71-gd317 From 7f038d256c723dd390d2fca942919573995f4cfd Mon Sep 17 00:00:00 2001 From: Dmitry Fleytman Dmitry Fleytman Date: Tue, 19 Dec 2017 06:02:04 +0200 Subject: usb: Add device quirk for Logitech HD Pro Webcam C925e Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 95812656d9b9..4024926c1d68 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -52,10 +52,11 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Logitech HD Pro Webcams C920, C920-C and C930e */ + /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech ConferenceCam CC3000e */ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, -- cgit v1.2.3-71-gd317 From a93639090a2743c8e205c1ac25439702702b4ce4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 14 Dec 2017 15:43:43 +1100 Subject: staging: lustre: lnet: Fix recent breakage from list_for_each conversion Commit 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry") was intended to be an idempotent change, but actually broke the behavior of ksocknal_add_peer() causing mounts to fail. The fact that it caused an existing "route2 = NULL;" to become redundant could have been a clue. The fact that the loop body set the new loop variable to NULL might also have been a clue The original code relied on "route2" being NULL if nothing was found. The new code would always set route2 to a non-NULL value if the list was empty, and would likely crash if the list was not empty. Restore correct functionality by using code-flow rather the value of "route2" to determine whether to use on old route, or to add a new one. Fixes: 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry") Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman --- .../staging/lustre/lnet/klnds/socklnd/socklnd.c | 23 ++++++++++------------ 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c index 986c2a40d978..8267119ccc8e 100644 --- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c +++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c @@ -487,21 +487,18 @@ ksocknal_add_peer(struct lnet_ni *ni, struct lnet_process_id id, __u32 ipaddr, ksocknal_nid2peerlist(id.nid)); } - route2 = NULL; list_for_each_entry(route2, &peer->ksnp_routes, ksnr_list) { - if (route2->ksnr_ipaddr == ipaddr) - break; - - route2 = NULL; - } - if (!route2) { - ksocknal_add_route_locked(peer, route); - route->ksnr_share_count++; - } else { - ksocknal_route_decref(route); - route2->ksnr_share_count++; + if (route2->ksnr_ipaddr == ipaddr) { + /* Route already exists, use the old one */ + ksocknal_route_decref(route); + route2->ksnr_share_count++; + goto out; + } } - + /* Route doesn't already exist, add the new one */ + ksocknal_add_route_locked(peer, route); + route->ksnr_share_count++; +out: write_unlock_bh(&ksocknal_data.ksnd_global_lock); return 0; -- cgit v1.2.3-71-gd317 From e0795606ad565cc2da0b926a00c7e6b8187a6d71 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 13 Dec 2017 18:28:58 +0000 Subject: drm/i915/lpe: Remove double-encapsulation of info string Just printk the string, or at least do not double up on the newlines! Fixes: eef57324d926 ("drm/i915: setup bridge for HDMI LPE audio driver") Signed-off-by: Chris Wilson Cc: Pierre-Louis Bossart Cc: Jerome Anand Cc: Jani Nikula Cc: Takashi Iwai Reviewed-by: Dhinakaran Pandiyan Link: https://patchwork.freedesktop.org/patch/msgid/20171213182858.2159-1-chris@chris-wilson.co.uk (cherry picked from commit 99cd05c43baac8ef56c20eb1776a15b02c81ccc3) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lpe_audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 3bf65288ffff..5809b29044fc 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -193,7 +193,7 @@ static bool lpe_audio_detect(struct drm_i915_private *dev_priv) }; if (!pci_dev_present(atom_hdaudio_ids)) { - DRM_INFO("%s\n", "HDaudio controller not detected, using LPE audio instead\n"); + DRM_INFO("HDaudio controller not detected, using LPE audio instead\n"); lpe_present = true; } } -- cgit v1.2.3-71-gd317 From a4ffdc2b6726958c07d535318400124e3a3bc19b Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Fri, 15 Dec 2017 14:43:10 -0800 Subject: drm/i915: Protect DDI port to DPLL map from theoretical race. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In case we have multiple modesets for different connectors happening in parallel we could have a race on the RMW on these shared registers. This possibility was initially raised by Paulo when reviewing commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' but the original possibility comes from commit '5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe later when atomic commits entered into picture. Apparently the discussion around this topic showed that the right solution would be on serializing the atomic commits in a way that we don't have the possibility of races here since if that parallel modeset happenings apparently many other things will be on fire. Code is there since SKL and there was no report of issue, but since we never looked back to that serialization possibility, and also we don't have an igt case for that it is better to at least protect this corner. Suggested-by: Paulo Zanoni Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping") Fixes: 5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0") Cc: Paulo Zanoni Cc: Ville Syrjälä Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Signed-off-by: Rodrigo Vivi Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com (cherry picked from commit 8edcda1266f93816fde77c9754f388ae0ae343fc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ddi.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index e0843bb99169..58a3755544b2 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -2128,6 +2128,8 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder, if (WARN_ON(!pll)) return; + mutex_lock(&dev_priv->dpll_lock); + if (IS_CANNONLAKE(dev_priv)) { /* Configure DPCLKA_CFGCR0 to map the DPLL to the DDI. */ val = I915_READ(DPCLKA_CFGCR0); @@ -2157,6 +2159,8 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder, } else if (INTEL_INFO(dev_priv)->gen < 9) { I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); } + + mutex_unlock(&dev_priv->dpll_lock); } static void intel_ddi_clk_disable(struct intel_encoder *encoder) -- cgit v1.2.3-71-gd317 From f292b9b28097d8fe870336108e91bd95a14294bf Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 15 Dec 2017 19:59:47 -0800 Subject: staging: ion: Fix ion_cma_heap allocations In trying to add support for drm_hwcomposer to HiKey, I've needed to utilize the ION CMA heap, and I've noticed problems with allocations on newer kernels failing. It seems back with 204f672255c2 ("ion: Use CMA APIs directly"), the ion_cma_heap code was modified to use the CMA API, but kept the arguments as buffer lengths rather then number of pages. This results in errors as we don't have enough pages in CMA to satisfy the exaggerated requests. This patch converts the ion_cma_heap CMA API usage to properly request pages. It also fixes a minor issue in the allocation where in the error path, the cma_release is called with the buffer->size value which hasn't yet been set. Cc: Laura Abbott Cc: Sumit Semwal Cc: Benjamin Gaignard Cc: Archit Taneja Cc: Greg KH Cc: Daniel Vetter Cc: Dmitry Shmidt Cc: Todd Kjos Cc: Amit Pundir Fixes: 204f672255c2 ("staging: android: ion: Use CMA APIs directly") Acked-by: Laura Abbott Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/Kconfig | 2 +- drivers/staging/android/ion/ion_cma_heap.c | 15 +++++++++++---- 2 files changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/ion/Kconfig b/drivers/staging/android/ion/Kconfig index a517b2d29f1b..8f6494158d3d 100644 --- a/drivers/staging/android/ion/Kconfig +++ b/drivers/staging/android/ion/Kconfig @@ -37,7 +37,7 @@ config ION_CHUNK_HEAP config ION_CMA_HEAP bool "Ion CMA heap support" - depends on ION && CMA + depends on ION && DMA_CMA help Choose this option to enable CMA heaps with Ion. This heap is backed by the Contiguous Memory Allocator (CMA). If your system has these diff --git a/drivers/staging/android/ion/ion_cma_heap.c b/drivers/staging/android/ion/ion_cma_heap.c index dd5545d9990a..86196ffd2faf 100644 --- a/drivers/staging/android/ion/ion_cma_heap.c +++ b/drivers/staging/android/ion/ion_cma_heap.c @@ -39,9 +39,15 @@ static int ion_cma_allocate(struct ion_heap *heap, struct ion_buffer *buffer, struct ion_cma_heap *cma_heap = to_cma_heap(heap); struct sg_table *table; struct page *pages; + unsigned long size = PAGE_ALIGN(len); + unsigned long nr_pages = size >> PAGE_SHIFT; + unsigned long align = get_order(size); int ret; - pages = cma_alloc(cma_heap->cma, len, 0, GFP_KERNEL); + if (align > CONFIG_CMA_ALIGNMENT) + align = CONFIG_CMA_ALIGNMENT; + + pages = cma_alloc(cma_heap->cma, nr_pages, align, GFP_KERNEL); if (!pages) return -ENOMEM; @@ -53,7 +59,7 @@ static int ion_cma_allocate(struct ion_heap *heap, struct ion_buffer *buffer, if (ret) goto free_mem; - sg_set_page(table->sgl, pages, len, 0); + sg_set_page(table->sgl, pages, size, 0); buffer->priv_virt = pages; buffer->sg_table = table; @@ -62,7 +68,7 @@ static int ion_cma_allocate(struct ion_heap *heap, struct ion_buffer *buffer, free_mem: kfree(table); err: - cma_release(cma_heap->cma, pages, buffer->size); + cma_release(cma_heap->cma, pages, nr_pages); return -ENOMEM; } @@ -70,9 +76,10 @@ static void ion_cma_free(struct ion_buffer *buffer) { struct ion_cma_heap *cma_heap = to_cma_heap(buffer->heap); struct page *pages = buffer->priv_virt; + unsigned long nr_pages = PAGE_ALIGN(buffer->size) >> PAGE_SHIFT; /* release memory */ - cma_release(cma_heap->cma, pages, buffer->size); + cma_release(cma_heap->cma, pages, nr_pages); /* release sg table */ sg_free_table(buffer->sg_table); kfree(buffer->sg_table); -- cgit v1.2.3-71-gd317 From d6b246bb7a29703f53aa4c050b8b3205d749caee Mon Sep 17 00:00:00 2001 From: Sushmita Susheelendra Date: Fri, 15 Dec 2017 13:59:13 -0700 Subject: staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device Use the direction argument passed into begin_cpu_access and end_cpu_access when calling the dma_sync_sg_for_cpu/device. The actual cache primitive called depends on the direction passed in. Signed-off-by: Sushmita Susheelendra Cc: stable Acked-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/ion.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c index a7d9b0e98572..f480885e346b 100644 --- a/drivers/staging/android/ion/ion.c +++ b/drivers/staging/android/ion/ion.c @@ -346,7 +346,7 @@ static int ion_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, mutex_lock(&buffer->lock); list_for_each_entry(a, &buffer->attachments, list) { dma_sync_sg_for_cpu(a->dev, a->table->sgl, a->table->nents, - DMA_BIDIRECTIONAL); + direction); } mutex_unlock(&buffer->lock); @@ -368,7 +368,7 @@ static int ion_dma_buf_end_cpu_access(struct dma_buf *dmabuf, mutex_lock(&buffer->lock); list_for_each_entry(a, &buffer->attachments, list) { dma_sync_sg_for_device(a->dev, a->table->sgl, a->table->nents, - DMA_BIDIRECTIONAL); + direction); } mutex_unlock(&buffer->lock); -- cgit v1.2.3-71-gd317 From 748a240c589824e9121befb1cba5341c319885bc Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 15 Dec 2017 15:21:50 -0600 Subject: tg3: Fix rx hang on MTU change with 5717/5719 This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index de51c2177d03..d09c5a9c53b5 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14225,7 +14225,9 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) /* Reset PHY, otherwise the read DMA engine will be in a mode that * breaks all requests to 256 bytes. */ - if (tg3_asic_rev(tp) == ASIC_REV_57766) + if (tg3_asic_rev(tp) == ASIC_REV_57766 || + tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719) reset_phy = true; err = tg3_restart_hw(tp, reset_phy); -- cgit v1.2.3-71-gd317 From 8ba6b30ef700e16f3bc668e6f4f8375da9229e4d Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Sun, 17 Dec 2017 17:16:43 +0100 Subject: mlxsw: spectrum_router: Remove batch neighbour deletion causing FW bug This reverts commit 63dd00fa3e524c27cc0509190084ab147ecc8ae2. RAUHT DELETE_ALL seems to trigger a bug in FW. That manifests by later calls to RAUHT ADD of an IPv6 neighbor to fail with "bad parameter" error code. Signed-off-by: Petr Machata Fixes: 63dd00fa3e52 ("mlxsw: spectrum_router: Add batch neighbour deletion") Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 72ef4f8025f0..be657b8533f0 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -2436,25 +2436,16 @@ static void mlxsw_sp_neigh_fini(struct mlxsw_sp *mlxsw_sp) rhashtable_destroy(&mlxsw_sp->router->neigh_ht); } -static int mlxsw_sp_neigh_rif_flush(struct mlxsw_sp *mlxsw_sp, - const struct mlxsw_sp_rif *rif) -{ - char rauht_pl[MLXSW_REG_RAUHT_LEN]; - - mlxsw_reg_rauht_pack(rauht_pl, MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL, - rif->rif_index, rif->addr); - return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl); -} - static void mlxsw_sp_neigh_rif_gone_sync(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_rif *rif) { struct mlxsw_sp_neigh_entry *neigh_entry, *tmp; - mlxsw_sp_neigh_rif_flush(mlxsw_sp, rif); list_for_each_entry_safe(neigh_entry, tmp, &rif->neigh_list, - rif_list_node) + rif_list_node) { + mlxsw_sp_neigh_entry_update(mlxsw_sp, neigh_entry, false); mlxsw_sp_neigh_entry_destroy(mlxsw_sp, neigh_entry); + } } enum mlxsw_sp_nexthop_type { -- cgit v1.2.3-71-gd317 From 7352e252b5bf40d59342494a70354a2d436fd0cd Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 18 Dec 2017 17:00:17 +0800 Subject: net: mediatek: setup proper state for disabled GMAC on the default The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 54adfd967858..fc67e35b253e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1961,11 +1961,12 @@ static int mtk_hw_init(struct mtk_eth *eth) /* set GE2 TUNE */ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0); - /* GE1, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0)); - - /* GE2, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1)); + /* Set linkdown as the default for each GMAC. Its own MCR would be set + * up with the more appropriate value when mtk_phy_link_adjust call is + * being invoked. + */ + for (i = 0; i < MTK_MAC_COUNT; i++) + mtk_w32(eth, 0, MTK_MAC_MCR(i)); /* Indicates CDM to parse the MTK special tag from CPU * which also is working out for untag packets. -- cgit v1.2.3-71-gd317 From e688822d035b494071ecbadcccbd6f3325fb0f59 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Fri, 15 Dec 2017 20:20:06 +0300 Subject: net: arc_emac: fix arc_emac_rx() error paths arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 53 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 3241af1ce718..5b422be56165 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -210,39 +210,48 @@ static int arc_emac_rx(struct net_device *ndev, int budget) continue; } - pktlen = info & LEN_MASK; - stats->rx_packets++; - stats->rx_bytes += pktlen; - skb = rx_buff->skb; - skb_put(skb, pktlen); - skb->dev = ndev; - skb->protocol = eth_type_trans(skb, ndev); - - dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), - dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); - - /* Prepare the BD for next cycle */ - rx_buff->skb = netdev_alloc_skb_ip_align(ndev, - EMAC_BUFFER_SIZE); - if (unlikely(!rx_buff->skb)) { + /* Prepare the BD for next cycle. netif_receive_skb() + * only if new skb was allocated and mapped to avoid holes + * in the RX fifo. + */ + skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); + if (unlikely(!skb)) { + if (net_ratelimit()) + netdev_err(ndev, "cannot allocate skb\n"); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; - /* Because receive_skb is below, increment rx_dropped */ stats->rx_dropped++; continue; } - /* receive_skb only if new skb was allocated to avoid holes */ - netif_receive_skb(skb); - - addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, + addr = dma_map_single(&ndev->dev, (void *)skb->data, EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, addr)) { if (net_ratelimit()) - netdev_err(ndev, "cannot dma map\n"); - dev_kfree_skb(rx_buff->skb); + netdev_err(ndev, "cannot map dma buffer\n"); + dev_kfree_skb(skb); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; + stats->rx_dropped++; continue; } + + /* unmap previosly mapped skb */ + dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), + dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); + + pktlen = info & LEN_MASK; + stats->rx_packets++; + stats->rx_bytes += pktlen; + skb_put(rx_buff->skb, pktlen); + rx_buff->skb->dev = ndev; + rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); + + netif_receive_skb(rx_buff->skb); + + rx_buff->skb = skb; dma_unmap_addr_set(rx_buff, addr, addr); dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); -- cgit v1.2.3-71-gd317 From 78aa09754d69ba19a55c59f490788ec1c85f41f0 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Tue, 19 Dec 2017 14:03:57 +0300 Subject: net: arc_emac: restart stalled EMAC Under certain conditions EMAC stop reception of incoming packets and continuously increment R_MISS register instead of saving data into provided buffer. The commit implement workaround for such situation. Then the stall detected EMAC will be restarted. On device the stall looks like the device lost it's dynamic IP address. ifconfig shows that interface error counter rapidly increments. At the same time on the DHCP server we can see continues DHCP-requests from device. In real network stalls happen really rarely. To make them frequent the broadcast storm[1] should be simulated. For simulation it is necessary to make following connections: 1. connect radxarock to 1st port of switch 2. connect some PC to 2nd port of switch 3. connect two other free ports together using standard ethernet cable, in order to make a switching loop. After that, is necessary to make a broadcast storm. For example, running on PC 'ping' to some IP address triggers ARP-request storm. After some time (~10sec), EMAC on rk3188 will stall. Observed and tested on rk3188 radxarock. [1] https://en.wikipedia.org/wiki/Broadcast_radiation Signed-off-by: Alexander Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac.h | 2 + drivers/net/ethernet/arc/emac_main.c | 111 +++++++++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h index 3c63b16d485f..d9efbc8d783b 100644 --- a/drivers/net/ethernet/arc/emac.h +++ b/drivers/net/ethernet/arc/emac.h @@ -159,6 +159,8 @@ struct arc_emac_priv { unsigned int link; unsigned int duplex; unsigned int speed; + + unsigned int rx_missed_errors; }; /** diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 5b422be56165..bd277b0dc615 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -26,6 +26,8 @@ #include "emac.h" +static void arc_emac_restart(struct net_device *ndev); + /** * arc_emac_tx_avail - Return the number of available slots in the tx ring. * @priv: Pointer to ARC EMAC private data structure. @@ -267,6 +269,53 @@ static int arc_emac_rx(struct net_device *ndev, int budget) return work_done; } +/** + * arc_emac_rx_miss_handle - handle R_MISS register + * @ndev: Pointer to the net_device structure. + */ +static void arc_emac_rx_miss_handle(struct net_device *ndev) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + unsigned int miss; + + miss = arc_reg_get(priv, R_MISS); + if (miss) { + stats->rx_errors += miss; + stats->rx_missed_errors += miss; + priv->rx_missed_errors += miss; + } +} + +/** + * arc_emac_rx_stall_check - check RX stall + * @ndev: Pointer to the net_device structure. + * @budget: How many BDs requested to process on 1 call. + * @work_done: How many BDs processed + * + * Under certain conditions EMAC stop reception of incoming packets and + * continuously increment R_MISS register instead of saving data into + * provided buffer. This function detect that condition and restart + * EMAC. + */ +static void arc_emac_rx_stall_check(struct net_device *ndev, + int budget, unsigned int work_done) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + struct arc_emac_bd *rxbd; + + if (work_done) + priv->rx_missed_errors = 0; + + if (priv->rx_missed_errors && budget) { + rxbd = &priv->rxbd[priv->last_rx_bd]; + if (le32_to_cpu(rxbd->info) & FOR_EMAC) { + arc_emac_restart(ndev); + priv->rx_missed_errors = 0; + } + } +} + /** * arc_emac_poll - NAPI poll handler. * @napi: Pointer to napi_struct structure. @@ -281,6 +330,7 @@ static int arc_emac_poll(struct napi_struct *napi, int budget) unsigned int work_done; arc_emac_tx_clean(ndev); + arc_emac_rx_miss_handle(ndev); work_done = arc_emac_rx(ndev, budget); if (work_done < budget) { @@ -288,6 +338,8 @@ static int arc_emac_poll(struct napi_struct *napi, int budget) arc_reg_or(priv, R_ENABLE, RXINT_MASK | TXINT_MASK); } + arc_emac_rx_stall_check(ndev, budget, work_done); + return work_done; } @@ -329,6 +381,8 @@ static irqreturn_t arc_emac_intr(int irq, void *dev_instance) if (status & MSER_MASK) { stats->rx_missed_errors += 0x100; stats->rx_errors += 0x100; + priv->rx_missed_errors += 0x100; + napi_schedule(&priv->napi); } if (status & RXCR_MASK) { @@ -741,6 +795,63 @@ static int arc_emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } +/** + * arc_emac_restart - Restart EMAC + * @ndev: Pointer to net_device structure. + * + * This function do hardware reset of EMAC in order to restore + * network packets reception. + */ +static void arc_emac_restart(struct net_device *ndev) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + int i; + + if (net_ratelimit()) + netdev_warn(ndev, "restarting stalled EMAC\n"); + + netif_stop_queue(ndev); + + /* Disable interrupts */ + arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); + + /* Disable EMAC */ + arc_reg_clr(priv, R_CTRL, EN_MASK); + + /* Return the sk_buff to system */ + arc_free_tx_queue(ndev); + + /* Clean Tx BD's */ + priv->txbd_curr = 0; + priv->txbd_dirty = 0; + memset(priv->txbd, 0, TX_RING_SZ); + + for (i = 0; i < RX_BD_NUM; i++) { + struct arc_emac_bd *rxbd = &priv->rxbd[i]; + unsigned int info = le32_to_cpu(rxbd->info); + + if (!(info & FOR_EMAC)) { + stats->rx_errors++; + stats->rx_dropped++; + } + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); + } + priv->last_rx_bd = 0; + + /* Make sure info is visible to EMAC before enable */ + wmb(); + + /* Enable interrupts */ + arc_reg_set(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); + + /* Enable EMAC */ + arc_reg_or(priv, R_CTRL, EN_MASK); + + netif_start_queue(ndev); +} + static const struct net_device_ops arc_emac_netdev_ops = { .ndo_open = arc_emac_open, .ndo_stop = arc_emac_stop, -- cgit v1.2.3-71-gd317 From a93bf0ff449064e6b7f44e58522e940f88c0d966 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 18 Dec 2017 14:20:56 +0800 Subject: vxlan: update skb dst pmtu on tx path Unlike ip tunnels, now vxlan doesn't do any pmtu update for upper dst pmtu, even if it doesn't match the lower dst pmtu any more. The problem can be reproduced when reducing the vxlan lower dev's pmtu when running netperf. In jianlin's testing, the performance went to 1/7 of the previous. This patch is to update the upper dst pmtu to match the lower dst pmtu on tx path so that packets can be sent out even when lower dev's pmtu has been changed. It also works for metadata dst. Note that this patch doesn't process any pmtu icmp packet. But even in the future, the support for pmtu icmp packets process of udp tunnels will also needs this. The same thing will be done for geneve in another patch. Signed-off-by: Xin Long Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 1000b0e4ee01..31f4b7911ef8 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2155,6 +2155,13 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, } ndst = &rt->dst; + if (skb_dst(skb)) { + int mtu = dst_mtu(ndst) - VXLAN_HEADROOM; + + skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, + skb, mtu); + } + tos = ip_tunnel_ecn_encap(tos, old_iph, skb); ttl = ttl ? : ip4_dst_hoplimit(&rt->dst); err = vxlan_build_skb(skb, ndst, sizeof(struct iphdr), @@ -2190,6 +2197,13 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, goto out_unlock; } + if (skb_dst(skb)) { + int mtu = dst_mtu(ndst) - VXLAN6_HEADROOM; + + skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, + skb, mtu); + } + tos = ip_tunnel_ecn_encap(tos, old_iph, skb); ttl = ttl ? : ip6_dst_hoplimit(ndst); skb_scrub_packet(skb, xnet); -- cgit v1.2.3-71-gd317 From 200922c93f008e03ddc804c6dacdf26ca1ba86d7 Mon Sep 17 00:00:00 2001 From: Fredrik Hallenberg Date: Mon, 18 Dec 2017 23:33:59 +0100 Subject: net: stmmac: Fix TX timestamp calculation When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value. Signed-off-by: Fredrik Hallenberg Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c index 721b61655261..08c19ebd5306 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -34,6 +34,7 @@ static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr, { u32 value = readl(ioaddr + PTP_TCR); unsigned long data; + u32 reg_value; /* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second * formula = (1/ptp_clock) * 1000000000 @@ -50,10 +51,11 @@ static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr, data &= PTP_SSIR_SSINC_MASK; + reg_value = data; if (gmac4) - data = data << GMAC4_PTP_SSIR_SSINC_SHIFT; + reg_value <<= GMAC4_PTP_SSIR_SSINC_SHIFT; - writel(data, ioaddr + PTP_SSIR); + writel(reg_value, ioaddr + PTP_SSIR); return data; } -- cgit v1.2.3-71-gd317 From a1762456993893795030d911106a7650481db0ef Mon Sep 17 00:00:00 2001 From: Fredrik Hallenberg Date: Mon, 18 Dec 2017 23:34:00 +0100 Subject: net: stmmac: Fix bad RX timestamp extraction As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by: Fredrik Hallenberg Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 5 +++-- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 3 ++- drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 5 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e1e5ac053760..ce2ea2d491ac 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -409,7 +409,7 @@ struct stmmac_desc_ops { /* get timestamp value */ u64(*get_timestamp) (void *desc, u32 ats); /* get rx timestamp status */ - int (*get_rx_timestamp_status) (void *desc, u32 ats); + int (*get_rx_timestamp_status)(void *desc, void *next_desc, u32 ats); /* Display ring */ void (*display_ring)(void *head, unsigned int size, bool rx); /* set MSS via context descriptor */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c index 4b286e27c4ca..7e089bf906b4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c @@ -258,7 +258,8 @@ static int dwmac4_rx_check_timestamp(void *desc) return ret; } -static int dwmac4_wrback_get_rx_timestamp_status(void *desc, u32 ats) +static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc, + u32 ats) { struct dma_desc *p = (struct dma_desc *)desc; int ret = -EINVAL; @@ -270,7 +271,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, u32 ats) /* Check if timestamp is OK from context descriptor */ do { - ret = dwmac4_rx_check_timestamp(desc); + ret = dwmac4_rx_check_timestamp(next_desc); if (ret < 0) goto exit; i++; diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 7546b3664113..2a828a312814 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -400,7 +400,8 @@ static u64 enh_desc_get_timestamp(void *desc, u32 ats) return ns; } -static int enh_desc_get_rx_timestamp_status(void *desc, u32 ats) +static int enh_desc_get_rx_timestamp_status(void *desc, void *next_desc, + u32 ats) { if (ats) { struct dma_extended_desc *p = (struct dma_extended_desc *)desc; diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c index f817f8f36569..db4cee57bb24 100644 --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c @@ -265,7 +265,7 @@ static u64 ndesc_get_timestamp(void *desc, u32 ats) return ns; } -static int ndesc_get_rx_timestamp_status(void *desc, u32 ats) +static int ndesc_get_rx_timestamp_status(void *desc, void *next_desc, u32 ats) { struct dma_desc *p = (struct dma_desc *)desc; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index d7250539d0bd..337d53d12e94 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -482,7 +482,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p, desc = np; /* Check if timestamp is available */ - if (priv->hw->desc->get_rx_timestamp_status(desc, priv->adv_ts)) { + if (priv->hw->desc->get_rx_timestamp_status(p, np, priv->adv_ts)) { ns = priv->hw->desc->get_timestamp(desc, priv->adv_ts); netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns); shhwtstamp = skb_hwtstamps(skb); -- cgit v1.2.3-71-gd317 From 61d2f2a05765a5f57149efbd93e3e81a83cbc2c1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 18 Dec 2017 11:57:51 +0800 Subject: clk: sunxi: sun9i-mmc: Implement reset callback for reset controls Our MMC host driver now issues a reset, instead of just deasserting the reset control, since commit c34eda69ad4c ("mmc: sunxi: Reset the device at probe time"). The sun9i-mmc clock driver does not support this, and will fail, which results in MMC not probing. This patch implements the reset callback by asserting the reset control, then deasserting it after a small delay. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Cc: # 4.14.x Signed-off-by: Chen-Yu Tsai Acked-by: Philipp Zabel Acked-by: Maxime Ripard Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20171218035751.20661-1-wens@csie.org --- drivers/clk/sunxi/clk-sun9i-mmc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c index a1a634253d6f..f00d8758ba24 100644 --- a/drivers/clk/sunxi/clk-sun9i-mmc.c +++ b/drivers/clk/sunxi/clk-sun9i-mmc.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -83,9 +84,20 @@ static int sun9i_mmc_reset_deassert(struct reset_controller_dev *rcdev, return 0; } +static int sun9i_mmc_reset_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + sun9i_mmc_reset_assert(rcdev, id); + udelay(10); + sun9i_mmc_reset_deassert(rcdev, id); + + return 0; +} + static const struct reset_control_ops sun9i_mmc_reset_ops = { .assert = sun9i_mmc_reset_assert, .deassert = sun9i_mmc_reset_deassert, + .reset = sun9i_mmc_reset_reset, }; static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev) -- cgit v1.2.3-71-gd317 From bae115a2bb479142605726e6aa130f43f50e801a Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 29 Oct 2017 04:03:37 +0200 Subject: net/mlx5: FPGA, return -EINVAL if size is zero Currently, if a size of zero is passed to mlx5_fpga_mem_{read|write}_i2c() the "err" return value will not be initialized, which triggers gcc warnings: [..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error: uninitialized symbol 'err'. [..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error: uninitialized symbol 'err'. fix that. Fixes: a9956d35d199 ('net/mlx5: FPGA, Add SBU infrastructure') Signed-off-by: Kamal Heib Reviewed-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c index 3c11d6e2160a..14962969c5ba 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c @@ -66,6 +66,9 @@ static int mlx5_fpga_mem_read_i2c(struct mlx5_fpga_device *fdev, size_t size, u8 actual_size; int err; + if (!size) + return -EINVAL; + if (!fdev->mdev) return -ENOTCONN; @@ -95,6 +98,9 @@ static int mlx5_fpga_mem_write_i2c(struct mlx5_fpga_device *fdev, size_t size, u8 actual_size; int err; + if (!size) + return -EINVAL; + if (!fdev->mdev) return -ENOTCONN; -- cgit v1.2.3-71-gd317 From 231243c82793428467524227ae02ca451e6a98e7 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 10 Nov 2017 15:59:52 +0900 Subject: Revert "mlx5: move affinity hints assignments to generic code" Before the offending commit, mlx5 core did the IRQ affinity itself, and it seems that the new generic code have some drawbacks and one of them is the lack for user ability to modify irq affinity after the initial affinity values got assigned. The issue is still being discussed and a solution in the new generic code is required, until then we need to revert this patch. This fixes the following issue: echo > /proc/irq//smp_affinity fails with -EIO This reverts commit a435393acafbf0ecff4deb3e3cb554b34f0d0664. Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since it is used in mlx5_ib driver. Fixes: a435393acafb ("mlx5: move affinity hints assignments to generic code") Cc: Sagi Grimberg Cc: Thomas Gleixner Cc: Jes Sorensen Reported-by: Jes Sorensen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 45 +++++++------- drivers/net/ethernet/mellanox/mlx5/core/main.c | 75 +++++++++++++++++++++-- include/linux/mlx5/driver.h | 1 + 4 files changed, 93 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index c0872b3284cb..43f9054830e5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -590,6 +590,7 @@ struct mlx5e_channel { struct mlx5_core_dev *mdev; struct hwtstamp_config *tstamp; int ix; + int cpu; }; struct mlx5e_channels { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index d2b057a3e512..cbec66bc82f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -71,11 +71,6 @@ struct mlx5e_channel_param { struct mlx5e_cq_param icosq_cq; }; -static int mlx5e_get_node(struct mlx5e_priv *priv, int ix) -{ - return pci_irq_get_node(priv->mdev->pdev, MLX5_EQ_VEC_COMP_BASE + ix); -} - static bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev) { return MLX5_CAP_GEN(mdev, striding_rq) && @@ -444,17 +439,16 @@ static int mlx5e_rq_alloc_mpwqe_info(struct mlx5e_rq *rq, int wq_sz = mlx5_wq_ll_get_size(&rq->wq); int mtt_sz = mlx5e_get_wqe_mtt_sz(); int mtt_alloc = mtt_sz + MLX5_UMR_ALIGN - 1; - int node = mlx5e_get_node(c->priv, c->ix); int i; rq->mpwqe.info = kzalloc_node(wq_sz * sizeof(*rq->mpwqe.info), - GFP_KERNEL, node); + GFP_KERNEL, cpu_to_node(c->cpu)); if (!rq->mpwqe.info) goto err_out; /* We allocate more than mtt_sz as we will align the pointer */ - rq->mpwqe.mtt_no_align = kzalloc_node(mtt_alloc * wq_sz, - GFP_KERNEL, node); + rq->mpwqe.mtt_no_align = kzalloc_node(mtt_alloc * wq_sz, GFP_KERNEL, + cpu_to_node(c->cpu)); if (unlikely(!rq->mpwqe.mtt_no_align)) goto err_free_wqe_info; @@ -562,7 +556,7 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c, int err; int i; - rqp->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + rqp->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_ll_create(mdev, &rqp->wq, rqc_wq, &rq->wq, &rq->wq_ctrl); @@ -629,8 +623,7 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c, default: /* MLX5_WQ_TYPE_LINKED_LIST */ rq->wqe.frag_info = kzalloc_node(wq_sz * sizeof(*rq->wqe.frag_info), - GFP_KERNEL, - mlx5e_get_node(c->priv, c->ix)); + GFP_KERNEL, cpu_to_node(c->cpu)); if (!rq->wqe.frag_info) { err = -ENOMEM; goto err_rq_wq_destroy; @@ -1000,13 +993,13 @@ static int mlx5e_alloc_xdpsq(struct mlx5e_channel *c, sq->uar_map = mdev->mlx5e_res.bfreg.map; sq->min_inline_mode = params->tx_min_inline_mode; - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, &sq->wq, &sq->wq_ctrl); if (err) return err; sq->wq.db = &sq->wq.db[MLX5_SND_DBR]; - err = mlx5e_alloc_xdpsq_db(sq, mlx5e_get_node(c->priv, c->ix)); + err = mlx5e_alloc_xdpsq_db(sq, cpu_to_node(c->cpu)); if (err) goto err_sq_wq_destroy; @@ -1053,13 +1046,13 @@ static int mlx5e_alloc_icosq(struct mlx5e_channel *c, sq->channel = c; sq->uar_map = mdev->mlx5e_res.bfreg.map; - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, &sq->wq, &sq->wq_ctrl); if (err) return err; sq->wq.db = &sq->wq.db[MLX5_SND_DBR]; - err = mlx5e_alloc_icosq_db(sq, mlx5e_get_node(c->priv, c->ix)); + err = mlx5e_alloc_icosq_db(sq, cpu_to_node(c->cpu)); if (err) goto err_sq_wq_destroy; @@ -1126,13 +1119,13 @@ static int mlx5e_alloc_txqsq(struct mlx5e_channel *c, if (MLX5_IPSEC_DEV(c->priv->mdev)) set_bit(MLX5E_SQ_STATE_IPSEC, &sq->state); - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, &sq->wq, &sq->wq_ctrl); if (err) return err; sq->wq.db = &sq->wq.db[MLX5_SND_DBR]; - err = mlx5e_alloc_txqsq_db(sq, mlx5e_get_node(c->priv, c->ix)); + err = mlx5e_alloc_txqsq_db(sq, cpu_to_node(c->cpu)); if (err) goto err_sq_wq_destroy; @@ -1504,8 +1497,8 @@ static int mlx5e_alloc_cq(struct mlx5e_channel *c, struct mlx5_core_dev *mdev = c->priv->mdev; int err; - param->wq.buf_numa_node = mlx5e_get_node(c->priv, c->ix); - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.buf_numa_node = cpu_to_node(c->cpu); + param->wq.db_numa_node = cpu_to_node(c->cpu); param->eq_ix = c->ix; err = mlx5e_alloc_cq_common(mdev, param, cq); @@ -1604,6 +1597,11 @@ static void mlx5e_close_cq(struct mlx5e_cq *cq) mlx5e_free_cq(cq); } +static int mlx5e_get_cpu(struct mlx5e_priv *priv, int ix) +{ + return cpumask_first(priv->mdev->priv.irq_info[ix].mask); +} + static int mlx5e_open_tx_cqs(struct mlx5e_channel *c, struct mlx5e_params *params, struct mlx5e_channel_param *cparam) @@ -1752,12 +1750,13 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, { struct mlx5e_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; + int cpu = mlx5e_get_cpu(priv, ix); struct mlx5e_channel *c; unsigned int irq; int err; int eqn; - c = kzalloc_node(sizeof(*c), GFP_KERNEL, mlx5e_get_node(priv, ix)); + c = kzalloc_node(sizeof(*c), GFP_KERNEL, cpu_to_node(cpu)); if (!c) return -ENOMEM; @@ -1765,6 +1764,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, c->mdev = priv->mdev; c->tstamp = &priv->tstamp; c->ix = ix; + c->cpu = cpu; c->pdev = &priv->mdev->pdev->dev; c->netdev = priv->netdev; c->mkey_be = cpu_to_be32(priv->mdev->mlx5e_res.mkey.key); @@ -1853,8 +1853,7 @@ static void mlx5e_activate_channel(struct mlx5e_channel *c) for (tc = 0; tc < c->num_tc; tc++) mlx5e_activate_txqsq(&c->sq[tc]); mlx5e_activate_rq(&c->rq); - netif_set_xps_queue(c->netdev, - mlx5_get_vector_affinity(c->priv->mdev, c->ix), c->ix); + netif_set_xps_queue(c->netdev, get_cpu_mask(c->cpu), c->ix); } static void mlx5e_deactivate_channel(struct mlx5e_channel *c) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 5f323442cc5a..8a89c7e8cd63 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -317,9 +317,6 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) { struct mlx5_priv *priv = &dev->priv; struct mlx5_eq_table *table = &priv->eq_table; - struct irq_affinity irqdesc = { - .pre_vectors = MLX5_EQ_VEC_COMP_BASE, - }; int num_eqs = 1 << MLX5_CAP_GEN(dev, log_max_eq); int nvec; @@ -333,10 +330,9 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) if (!priv->irq_info) goto err_free_msix; - nvec = pci_alloc_irq_vectors_affinity(dev->pdev, + nvec = pci_alloc_irq_vectors(dev->pdev, MLX5_EQ_VEC_COMP_BASE + 1, nvec, - PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, - &irqdesc); + PCI_IRQ_MSIX); if (nvec < 0) return nvec; @@ -622,6 +618,63 @@ u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev) return (u64)timer_l | (u64)timer_h1 << 32; } +static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i) +{ + struct mlx5_priv *priv = &mdev->priv; + int irq = pci_irq_vector(mdev->pdev, MLX5_EQ_VEC_COMP_BASE + i); + + if (!zalloc_cpumask_var(&priv->irq_info[i].mask, GFP_KERNEL)) { + mlx5_core_warn(mdev, "zalloc_cpumask_var failed"); + return -ENOMEM; + } + + cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node), + priv->irq_info[i].mask); + + if (IS_ENABLED(CONFIG_SMP) && + irq_set_affinity_hint(irq, priv->irq_info[i].mask)) + mlx5_core_warn(mdev, "irq_set_affinity_hint failed, irq 0x%.4x", irq); + + return 0; +} + +static void mlx5_irq_clear_affinity_hint(struct mlx5_core_dev *mdev, int i) +{ + struct mlx5_priv *priv = &mdev->priv; + int irq = pci_irq_vector(mdev->pdev, MLX5_EQ_VEC_COMP_BASE + i); + + irq_set_affinity_hint(irq, NULL); + free_cpumask_var(priv->irq_info[i].mask); +} + +static int mlx5_irq_set_affinity_hints(struct mlx5_core_dev *mdev) +{ + int err; + int i; + + for (i = 0; i < mdev->priv.eq_table.num_comp_vectors; i++) { + err = mlx5_irq_set_affinity_hint(mdev, i); + if (err) + goto err_out; + } + + return 0; + +err_out: + for (i--; i >= 0; i--) + mlx5_irq_clear_affinity_hint(mdev, i); + + return err; +} + +static void mlx5_irq_clear_affinity_hints(struct mlx5_core_dev *mdev) +{ + int i; + + for (i = 0; i < mdev->priv.eq_table.num_comp_vectors; i++) + mlx5_irq_clear_affinity_hint(mdev, i); +} + int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn, unsigned int *irqn) { @@ -1097,6 +1150,12 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, goto err_stop_eqs; } + err = mlx5_irq_set_affinity_hints(dev); + if (err) { + dev_err(&pdev->dev, "Failed to alloc affinity hint cpumask\n"); + goto err_affinity_hints; + } + err = mlx5_init_fs(dev); if (err) { dev_err(&pdev->dev, "Failed to init flow steering\n"); @@ -1154,6 +1213,9 @@ err_sriov: mlx5_cleanup_fs(dev); err_fs: + mlx5_irq_clear_affinity_hints(dev); + +err_affinity_hints: free_comp_eqs(dev); err_stop_eqs: @@ -1222,6 +1284,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, mlx5_sriov_detach(dev); mlx5_cleanup_fs(dev); + mlx5_irq_clear_affinity_hints(dev); free_comp_eqs(dev); mlx5_stop_eqs(dev); mlx5_put_uars_page(dev, priv->uar); diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index a886b51511ab..40a6f33c4cde 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -556,6 +556,7 @@ struct mlx5_core_sriov { }; struct mlx5_irq_info { + cpumask_var_t mask; char name[MLX5_MAX_IRQ_NAME]; }; -- cgit v1.2.3-71-gd317 From 37e92a9d4fe38dc3e7308913575983a6a088c8d4 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 13 Nov 2017 10:11:27 +0200 Subject: net/mlx5: Fix rate limit packet pacing naming and struct In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/rl.c | 22 +++++++++++----------- include/linux/mlx5/mlx5_ifc.h | 8 +++++--- 3 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 1fffdebbc9e8..e9a1fbcc4adf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -362,7 +362,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_QUERY_VPORT_COUNTER: case MLX5_CMD_OP_ALLOC_Q_COUNTER: case MLX5_CMD_OP_QUERY_Q_COUNTER: - case MLX5_CMD_OP_SET_RATE_LIMIT: + case MLX5_CMD_OP_SET_PP_RATE_LIMIT: case MLX5_CMD_OP_QUERY_RATE_LIMIT: case MLX5_CMD_OP_CREATE_SCHEDULING_ELEMENT: case MLX5_CMD_OP_QUERY_SCHEDULING_ELEMENT: @@ -505,7 +505,7 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(ALLOC_Q_COUNTER); MLX5_COMMAND_STR_CASE(DEALLOC_Q_COUNTER); MLX5_COMMAND_STR_CASE(QUERY_Q_COUNTER); - MLX5_COMMAND_STR_CASE(SET_RATE_LIMIT); + MLX5_COMMAND_STR_CASE(SET_PP_RATE_LIMIT); MLX5_COMMAND_STR_CASE(QUERY_RATE_LIMIT); MLX5_COMMAND_STR_CASE(CREATE_SCHEDULING_ELEMENT); MLX5_COMMAND_STR_CASE(DESTROY_SCHEDULING_ELEMENT); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rl.c b/drivers/net/ethernet/mellanox/mlx5/core/rl.c index e651e4c02867..d3c33e9eea72 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/rl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/rl.c @@ -125,16 +125,16 @@ static struct mlx5_rl_entry *find_rl_entry(struct mlx5_rl_table *table, return ret_entry; } -static int mlx5_set_rate_limit_cmd(struct mlx5_core_dev *dev, +static int mlx5_set_pp_rate_limit_cmd(struct mlx5_core_dev *dev, u32 rate, u16 index) { - u32 in[MLX5_ST_SZ_DW(set_rate_limit_in)] = {0}; - u32 out[MLX5_ST_SZ_DW(set_rate_limit_out)] = {0}; + u32 in[MLX5_ST_SZ_DW(set_pp_rate_limit_in)] = {0}; + u32 out[MLX5_ST_SZ_DW(set_pp_rate_limit_out)] = {0}; - MLX5_SET(set_rate_limit_in, in, opcode, - MLX5_CMD_OP_SET_RATE_LIMIT); - MLX5_SET(set_rate_limit_in, in, rate_limit_index, index); - MLX5_SET(set_rate_limit_in, in, rate_limit, rate); + MLX5_SET(set_pp_rate_limit_in, in, opcode, + MLX5_CMD_OP_SET_PP_RATE_LIMIT); + MLX5_SET(set_pp_rate_limit_in, in, rate_limit_index, index); + MLX5_SET(set_pp_rate_limit_in, in, rate_limit, rate); return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); } @@ -173,7 +173,7 @@ int mlx5_rl_add_rate(struct mlx5_core_dev *dev, u32 rate, u16 *index) entry->refcount++; } else { /* new rate limit */ - err = mlx5_set_rate_limit_cmd(dev, rate, entry->index); + err = mlx5_set_pp_rate_limit_cmd(dev, rate, entry->index); if (err) { mlx5_core_err(dev, "Failed configuring rate: %u (%d)\n", rate, err); @@ -209,7 +209,7 @@ void mlx5_rl_remove_rate(struct mlx5_core_dev *dev, u32 rate) entry->refcount--; if (!entry->refcount) { /* need to remove rate */ - mlx5_set_rate_limit_cmd(dev, 0, entry->index); + mlx5_set_pp_rate_limit_cmd(dev, 0, entry->index); entry->rate = 0; } @@ -262,8 +262,8 @@ void mlx5_cleanup_rl_table(struct mlx5_core_dev *dev) /* Clear all configured rates */ for (i = 0; i < table->max_size; i++) if (table->rl_entry[i].rate) - mlx5_set_rate_limit_cmd(dev, 0, - table->rl_entry[i].index); + mlx5_set_pp_rate_limit_cmd(dev, 0, + table->rl_entry[i].index); kfree(dev->priv.rl_table.rl_entry); } diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 38a7577a9ce7..d44ec5f41d4a 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -147,7 +147,7 @@ enum { MLX5_CMD_OP_ALLOC_Q_COUNTER = 0x771, MLX5_CMD_OP_DEALLOC_Q_COUNTER = 0x772, MLX5_CMD_OP_QUERY_Q_COUNTER = 0x773, - MLX5_CMD_OP_SET_RATE_LIMIT = 0x780, + MLX5_CMD_OP_SET_PP_RATE_LIMIT = 0x780, MLX5_CMD_OP_QUERY_RATE_LIMIT = 0x781, MLX5_CMD_OP_CREATE_SCHEDULING_ELEMENT = 0x782, MLX5_CMD_OP_DESTROY_SCHEDULING_ELEMENT = 0x783, @@ -7239,7 +7239,7 @@ struct mlx5_ifc_add_vxlan_udp_dport_in_bits { u8 vxlan_udp_port[0x10]; }; -struct mlx5_ifc_set_rate_limit_out_bits { +struct mlx5_ifc_set_pp_rate_limit_out_bits { u8 status[0x8]; u8 reserved_at_8[0x18]; @@ -7248,7 +7248,7 @@ struct mlx5_ifc_set_rate_limit_out_bits { u8 reserved_at_40[0x40]; }; -struct mlx5_ifc_set_rate_limit_in_bits { +struct mlx5_ifc_set_pp_rate_limit_in_bits { u8 opcode[0x10]; u8 reserved_at_10[0x10]; @@ -7261,6 +7261,8 @@ struct mlx5_ifc_set_rate_limit_in_bits { u8 reserved_at_60[0x20]; u8 rate_limit[0x20]; + + u8 reserved_at_a0[0x160]; }; struct mlx5_ifc_access_register_out_bits { -- cgit v1.2.3-71-gd317 From ff0891915cd7b24ab27eee9b360c0452853bf9f6 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Thu, 26 Oct 2017 09:56:34 -0500 Subject: net/mlx5e: Fix ETS BW check Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Moshe Shemesh Reviewed-by: Huy Nguyen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index c6d90b6dd80e..9bcf38f4123b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -274,6 +274,7 @@ int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets) static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, struct ieee_ets *ets) { + bool have_ets_tc = false; int bw_sum = 0; int i; @@ -288,11 +289,14 @@ static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, } /* Validate Bandwidth Sum */ - for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) - if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) { + have_ets_tc = true; bw_sum += ets->tc_tx_bw[i]; + } + } - if (bw_sum != 0 && bw_sum != 100) { + if (have_ets_tc && bw_sum != 100) { netdev_err(netdev, "Failed to validate ETS: BW sum is illegal\n"); return -EINVAL; -- cgit v1.2.3-71-gd317 From 2989ad1ec03021ee6d2193c35414f1d970a243de Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Tue, 21 Nov 2017 17:49:36 +0200 Subject: net/mlx5e: Fix features check of IPv6 traffic The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index cbec66bc82f1..c535a44ab8ac 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3678,6 +3678,7 @@ static netdev_features_t mlx5e_tunnel_features_check(struct mlx5e_priv *priv, struct sk_buff *skb, netdev_features_t features) { + unsigned int offset = 0; struct udphdr *udph; u8 proto; u16 port; @@ -3687,7 +3688,7 @@ static netdev_features_t mlx5e_tunnel_features_check(struct mlx5e_priv *priv, proto = ip_hdr(skb)->protocol; break; case htons(ETH_P_IPV6): - proto = ipv6_hdr(skb)->nexthdr; + proto = ipv6_find_hdr(skb, &offset, -1, NULL, NULL); break; default: goto out; -- cgit v1.2.3-71-gd317 From 696a97cf9f5c551fca257e0d4aa07b5cbde6084a Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Tue, 14 Nov 2017 09:44:55 +0200 Subject: net/mlx5e: Fix defaulting RX ring size when not needed Fixes the bug when turning on/off CQE compression mechanism resets the RX rings size to default value when it is not needed. Fixes: 2fc4bfb7250d ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 8 ++++++-- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 10 ++++++++-- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 15 +++++++-------- drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 2 +- 4 files changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 43f9054830e5..543060c305a0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -82,6 +82,9 @@ max_t(u32, MLX5_MPWRQ_MIN_LOG_STRIDE_SZ(mdev), req) #define MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev) MLX5_MPWRQ_LOG_STRIDE_SZ(mdev, 6) #define MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) MLX5_MPWRQ_LOG_STRIDE_SZ(mdev, 8) +#define MLX5E_MPWQE_STRIDE_SZ(mdev, cqe_cmprs) \ + (cqe_cmprs ? MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) : \ + MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev)) #define MLX5_MPWRQ_LOG_WQE_SZ 18 #define MLX5_MPWRQ_WQE_PAGE_ORDER (MLX5_MPWRQ_LOG_WQE_SZ - PAGE_SHIFT > 0 ? \ @@ -936,8 +939,9 @@ void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode); void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode); -void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, - struct mlx5e_params *params, u8 rq_type); +void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev, + struct mlx5e_params *params, + u8 rq_type); static inline bool mlx5e_tunnel_inner_ft_supported(struct mlx5_core_dev *mdev) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 23425f028405..8f05efa5c829 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1523,8 +1523,10 @@ int mlx5e_modify_rx_cqe_compression_locked(struct mlx5e_priv *priv, bool new_val new_channels.params = priv->channels.params; MLX5E_SET_PFLAG(&new_channels.params, MLX5E_PFLAG_RX_CQE_COMPRESS, new_val); - mlx5e_set_rq_type_params(priv->mdev, &new_channels.params, - new_channels.params.rq_wq_type); + new_channels.params.mpwqe_log_stride_sz = + MLX5E_MPWQE_STRIDE_SZ(priv->mdev, new_val); + new_channels.params.mpwqe_log_num_strides = + MLX5_MPWRQ_LOG_WQE_SZ - new_channels.params.mpwqe_log_stride_sz; if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { priv->channels.params = new_channels.params; @@ -1536,6 +1538,10 @@ int mlx5e_modify_rx_cqe_compression_locked(struct mlx5e_priv *priv, bool new_val return err; mlx5e_switch_priv_channels(priv, &new_channels, NULL); + mlx5e_dbg(DRV, priv, "MLX5E: RxCqeCmprss was turned %s\n", + MLX5E_GET_PFLAG(&priv->channels.params, + MLX5E_PFLAG_RX_CQE_COMPRESS) ? "ON" : "OFF"); + return 0; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c535a44ab8ac..d9d8227f195f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -78,8 +78,8 @@ static bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev) MLX5_CAP_ETH(mdev, reg_umr_sq); } -void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, - struct mlx5e_params *params, u8 rq_type) +void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev, + struct mlx5e_params *params, u8 rq_type) { params->rq_wq_type = rq_type; params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ; @@ -88,10 +88,8 @@ void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, params->log_rq_size = is_kdump_kernel() ? MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE_MPW : MLX5E_PARAMS_DEFAULT_LOG_RQ_SIZE_MPW; - params->mpwqe_log_stride_sz = - MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS) ? - MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) : - MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev); + params->mpwqe_log_stride_sz = MLX5E_MPWQE_STRIDE_SZ(mdev, + MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS)); params->mpwqe_log_num_strides = MLX5_MPWRQ_LOG_WQE_SZ - params->mpwqe_log_stride_sz; break; @@ -115,13 +113,14 @@ void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS)); } -static void mlx5e_set_rq_params(struct mlx5_core_dev *mdev, struct mlx5e_params *params) +static void mlx5e_set_rq_params(struct mlx5_core_dev *mdev, + struct mlx5e_params *params) { u8 rq_type = mlx5e_check_fragmented_striding_rq_cap(mdev) && !params->xdp_prog && !MLX5_IPSEC_DEV(mdev) ? MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ : MLX5_WQ_TYPE_LINKED_LIST; - mlx5e_set_rq_type_params(mdev, params, rq_type); + mlx5e_init_rq_type_params(mdev, params, rq_type); } static void mlx5e_update_carrier(struct mlx5e_priv *priv) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index d2a66dc4adc6..8812d7208e8f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -57,7 +57,7 @@ static void mlx5i_build_nic_params(struct mlx5_core_dev *mdev, struct mlx5e_params *params) { /* Override RQ params as IPoIB supports only LINKED LIST RQ for now */ - mlx5e_set_rq_type_params(mdev, params, MLX5_WQ_TYPE_LINKED_LIST); + mlx5e_init_rq_type_params(mdev, params, MLX5_WQ_TYPE_LINKED_LIST); /* RQ size in ipoib by default is 512 */ params->log_rq_size = is_kdump_kernel() ? -- cgit v1.2.3-71-gd317 From 777ec2b2a3f2760505db395de1a9fa4115d74548 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 16 Nov 2017 14:57:48 +0200 Subject: net/mlx5: Fix misspelling in the error message and comment Fix misspelling in word syndrome. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/health.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 60771865c99c..0308a2b4823c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -466,7 +466,7 @@ static irqreturn_t mlx5_eq_int(int irq, void *eq_ptr) break; case MLX5_EVENT_TYPE_CQ_ERROR: cqn = be32_to_cpu(eqe->data.cq_err.cqn) & 0xffffff; - mlx5_core_warn(dev, "CQ error on CQN 0x%x, syndrom 0x%x\n", + mlx5_core_warn(dev, "CQ error on CQN 0x%x, syndrome 0x%x\n", cqn, eqe->data.cq_err.syndrome); mlx5_cq_event(dev, cqn, eqe->type); break; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index 1a0e797ad001..21d29f7936f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -241,7 +241,7 @@ static void print_health_info(struct mlx5_core_dev *dev) u32 fw; int i; - /* If the syndrom is 0, the device is OK and no need to print buffer */ + /* If the syndrome is 0, the device is OK and no need to print buffer */ if (!ioread8(&h->synd)) return; -- cgit v1.2.3-71-gd317 From dbff26e44dc3ec4de6578733b054a0114652a764 Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Mon, 4 Dec 2017 08:59:25 +0200 Subject: net/mlx5: Fix error flow in CREATE_QP command In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by: Moni Shoua Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c index db9e665ab104..889130edb715 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c @@ -213,8 +213,8 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev, err_cmd: memset(din, 0, sizeof(din)); memset(dout, 0, sizeof(dout)); - MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP); - MLX5_SET(destroy_qp_in, in, qpn, qp->qpn); + MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP); + MLX5_SET(destroy_qp_in, din, qpn, qp->qpn); mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout)); return err; } -- cgit v1.2.3-71-gd317 From 6323514116404cc651df1b7fffa1311ddf8ce647 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 23 Nov 2017 13:52:28 +0200 Subject: net/mlx5e: Fix possible deadlock of VXLAN lock mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user context) and mlx5e_features_check (softirq), but the lock acquired does not disable bottom half and might result in deadlock. Fix it by simply replacing spin_lock() with spin_lock_bh(). While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh(). lockdep's WARNING: inconsistent lock state [ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes: [ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028528] {SOFTIRQ-ON-W} state was registered at: [ 654.028607] _raw_spin_lock+0x3c/0x70 [ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core] [ 654.028878] process_one_work+0x1e9/0x640 [ 654.028942] worker_thread+0x4a/0x3f0 [ 654.029002] kthread+0x141/0x180 [ 654.029056] ret_from_fork+0x24/0x30 [ 654.029114] irq event stamp: 579088 [ 654.029174] hardirqs last enabled at (579088): [] ip6_finish_output2+0x49a/0x8c0 [ 654.029309] hardirqs last disabled at (579087): [] ip6_finish_output2+0x44e/0x8c0 [ 654.029446] softirqs last enabled at (579030): [] irq_enter+0x6d/0x80 [ 654.029567] softirqs last disabled at (579031): [] irq_exit+0xb5/0xc0 [ 654.029684] other info that might help us debug this: [ 654.029781] Possible unsafe locking scenario: [ 654.029868] CPU0 [ 654.029908] ---- [ 654.029947] lock(&(&vxlan_db->lock)->rlock); [ 654.030045] [ 654.030090] lock(&(&vxlan_db->lock)->rlock); [ 654.030162] *** DEADLOCK *** Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index 07a9ba6cfc70..f8238275759f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -71,9 +71,9 @@ struct mlx5e_vxlan *mlx5e_vxlan_lookup_port(struct mlx5e_priv *priv, u16 port) struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan; struct mlx5e_vxlan *vxlan; - spin_lock(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); vxlan = radix_tree_lookup(&vxlan_db->tree, port); - spin_unlock(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); return vxlan; } @@ -100,9 +100,9 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) vxlan->udp_port = port; - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); err = radix_tree_insert(&vxlan_db->tree, vxlan->udp_port, vxlan); - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); if (err) goto err_free; @@ -121,9 +121,9 @@ static void __mlx5e_vxlan_core_del_port(struct mlx5e_priv *priv, u16 port) struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan; struct mlx5e_vxlan *vxlan; - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); vxlan = radix_tree_delete(&vxlan_db->tree, port); - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); if (!vxlan) return; @@ -171,12 +171,12 @@ void mlx5e_vxlan_cleanup(struct mlx5e_priv *priv) struct mlx5e_vxlan *vxlan; unsigned int port = 0; - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); while (radix_tree_gang_lookup(&vxlan_db->tree, (void **)&vxlan, port, 1)) { port = vxlan->udp_port; - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); __mlx5e_vxlan_core_del_port(priv, (u16)port); - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); } - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); } -- cgit v1.2.3-71-gd317 From 23f4cc2cd9ed92570647220aca60d0197d8c1fa9 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Sun, 3 Dec 2017 13:58:50 +0200 Subject: net/mlx5e: Add refcount to VXLAN structure A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 50 +++++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/vxlan.h | 1 + 2 files changed, 28 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index f8238275759f..25f782344667 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -88,8 +88,11 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; - if (mlx5e_vxlan_lookup_port(priv, port)) + vxlan = mlx5e_vxlan_lookup_port(priv, port); + if (vxlan) { + atomic_inc(&vxlan->refcount); goto free_work; + } if (mlx5e_vxlan_core_add_port_cmd(priv->mdev, port)) goto free_work; @@ -99,6 +102,7 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) goto err_delete_port; vxlan->udp_port = port; + atomic_set(&vxlan->refcount, 1); spin_lock_bh(&vxlan_db->lock); err = radix_tree_insert(&vxlan_db->tree, vxlan->udp_port, vxlan); @@ -116,32 +120,33 @@ free_work: kfree(vxlan_work); } -static void __mlx5e_vxlan_core_del_port(struct mlx5e_priv *priv, u16 port) +static void mlx5e_vxlan_del_port(struct work_struct *work) { + struct mlx5e_vxlan_work *vxlan_work = + container_of(work, struct mlx5e_vxlan_work, work); + struct mlx5e_priv *priv = vxlan_work->priv; struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan; + u16 port = vxlan_work->port; struct mlx5e_vxlan *vxlan; + bool remove = false; spin_lock_bh(&vxlan_db->lock); - vxlan = radix_tree_delete(&vxlan_db->tree, port); - spin_unlock_bh(&vxlan_db->lock); - + vxlan = radix_tree_lookup(&vxlan_db->tree, port); if (!vxlan) - return; - - mlx5e_vxlan_core_del_port_cmd(priv->mdev, vxlan->udp_port); - - kfree(vxlan); -} + goto out_unlock; -static void mlx5e_vxlan_del_port(struct work_struct *work) -{ - struct mlx5e_vxlan_work *vxlan_work = - container_of(work, struct mlx5e_vxlan_work, work); - struct mlx5e_priv *priv = vxlan_work->priv; - u16 port = vxlan_work->port; + if (atomic_dec_and_test(&vxlan->refcount)) { + radix_tree_delete(&vxlan_db->tree, port); + remove = true; + } - __mlx5e_vxlan_core_del_port(priv, port); +out_unlock: + spin_unlock_bh(&vxlan_db->lock); + if (remove) { + mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); + kfree(vxlan); + } kfree(vxlan_work); } @@ -171,12 +176,11 @@ void mlx5e_vxlan_cleanup(struct mlx5e_priv *priv) struct mlx5e_vxlan *vxlan; unsigned int port = 0; - spin_lock_bh(&vxlan_db->lock); + /* Lockless since we are the only radix-tree consumers, wq is disabled */ while (radix_tree_gang_lookup(&vxlan_db->tree, (void **)&vxlan, port, 1)) { port = vxlan->udp_port; - spin_unlock_bh(&vxlan_db->lock); - __mlx5e_vxlan_core_del_port(priv, (u16)port); - spin_lock_bh(&vxlan_db->lock); + radix_tree_delete(&vxlan_db->tree, port); + mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); + kfree(vxlan); } - spin_unlock_bh(&vxlan_db->lock); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h index 5def12c048e3..5ef6ae7d568a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h @@ -36,6 +36,7 @@ #include "en.h" struct mlx5e_vxlan { + atomic_t refcount; u16 udp_port; }; -- cgit v1.2.3-71-gd317 From 0c1cc8b2215f5122ca614b5adca60346018758c3 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 4 Dec 2017 09:57:43 +0200 Subject: net/mlx5e: Prevent possible races in VXLAN control flow When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index 25f782344667..2f74953e4561 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -88,6 +88,7 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; + mutex_lock(&priv->state_lock); vxlan = mlx5e_vxlan_lookup_port(priv, port); if (vxlan) { atomic_inc(&vxlan->refcount); @@ -117,6 +118,7 @@ err_free: err_delete_port: mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); free_work: + mutex_unlock(&priv->state_lock); kfree(vxlan_work); } @@ -130,6 +132,7 @@ static void mlx5e_vxlan_del_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; bool remove = false; + mutex_lock(&priv->state_lock); spin_lock_bh(&vxlan_db->lock); vxlan = radix_tree_lookup(&vxlan_db->tree, port); if (!vxlan) @@ -147,6 +150,7 @@ out_unlock: mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); kfree(vxlan); } + mutex_unlock(&priv->state_lock); kfree(vxlan_work); } -- cgit v1.2.3-71-gd317 From 139ed6c6c46aa3d8970a086b8e0cf1f3522f5d4a Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Tue, 5 Dec 2017 13:45:21 +0200 Subject: net/mlx5: Fix steering memory leak Flow steering priority and namespace are software only objects that didn't have the proper destructors and were not freed during steering cleanup. Fix it by adding destructor functions for these objects. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index c70fd663a633..dfaad9ecb2b8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -174,6 +174,8 @@ static void del_hw_fte(struct fs_node *node); static void del_sw_flow_table(struct fs_node *node); static void del_sw_flow_group(struct fs_node *node); static void del_sw_fte(struct fs_node *node); +static void del_sw_prio(struct fs_node *node); +static void del_sw_ns(struct fs_node *node); /* Delete rule (destination) is special case that * requires to lock the FTE for all the deletion process. */ @@ -408,6 +410,16 @@ static inline struct mlx5_core_dev *get_dev(struct fs_node *node) return NULL; } +static void del_sw_ns(struct fs_node *node) +{ + kfree(node); +} + +static void del_sw_prio(struct fs_node *node) +{ + kfree(node); +} + static void del_hw_flow_table(struct fs_node *node) { struct mlx5_flow_table *ft; @@ -2064,7 +2076,7 @@ static struct fs_prio *fs_create_prio(struct mlx5_flow_namespace *ns, return ERR_PTR(-ENOMEM); fs_prio->node.type = FS_TYPE_PRIO; - tree_init_node(&fs_prio->node, NULL, NULL); + tree_init_node(&fs_prio->node, NULL, del_sw_prio); tree_add_node(&fs_prio->node, &ns->node); fs_prio->num_levels = num_levels; fs_prio->prio = prio; @@ -2090,7 +2102,7 @@ static struct mlx5_flow_namespace *fs_create_namespace(struct fs_prio *prio) return ERR_PTR(-ENOMEM); fs_init_namespace(ns); - tree_init_node(&ns->node, NULL, NULL); + tree_init_node(&ns->node, NULL, del_sw_ns); tree_add_node(&ns->node, &prio->node); list_add_tail(&ns->node.list, &prio->node.children); -- cgit v1.2.3-71-gd317 From d6b2785cd55ee72e9608762650b3ef299f801b1b Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Tue, 21 Nov 2017 15:15:51 +0200 Subject: net/mlx5: Cleanup IRQs in case of unload failure When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 20 +++++++++++++------- include/linux/mlx5/driver.h | 2 +- 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 0308a2b4823c..ab4d1465b7e4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -775,7 +775,7 @@ err1: return err; } -int mlx5_stop_eqs(struct mlx5_core_dev *dev) +void mlx5_stop_eqs(struct mlx5_core_dev *dev) { struct mlx5_eq_table *table = &dev->priv.eq_table; int err; @@ -784,22 +784,28 @@ int mlx5_stop_eqs(struct mlx5_core_dev *dev) if (MLX5_CAP_GEN(dev, pg)) { err = mlx5_destroy_unmap_eq(dev, &table->pfault_eq); if (err) - return err; + mlx5_core_err(dev, "failed to destroy page fault eq, err(%d)\n", + err); } #endif err = mlx5_destroy_unmap_eq(dev, &table->pages_eq); if (err) - return err; + mlx5_core_err(dev, "failed to destroy pages eq, err(%d)\n", + err); - mlx5_destroy_unmap_eq(dev, &table->async_eq); + err = mlx5_destroy_unmap_eq(dev, &table->async_eq); + if (err) + mlx5_core_err(dev, "failed to destroy async eq, err(%d)\n", + err); mlx5_cmd_use_polling(dev); err = mlx5_destroy_unmap_eq(dev, &table->cmd_eq); - if (err) + if (err) { + mlx5_core_err(dev, "failed to destroy command eq, err(%d)\n", + err); mlx5_cmd_use_events(dev); - - return err; + } } int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq, diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 40a6f33c4cde..57b109c6e422 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1049,7 +1049,7 @@ int mlx5_create_map_eq(struct mlx5_core_dev *dev, struct mlx5_eq *eq, u8 vecidx, enum mlx5_eq_type type); int mlx5_destroy_unmap_eq(struct mlx5_core_dev *dev, struct mlx5_eq *eq); int mlx5_start_eqs(struct mlx5_core_dev *dev); -int mlx5_stop_eqs(struct mlx5_core_dev *dev); +void mlx5_stop_eqs(struct mlx5_core_dev *dev); int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn, unsigned int *irqn); int mlx5_core_attach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid, u32 qpn); -- cgit v1.2.3-71-gd317 From a2fba188fd5eadd6061bef4f2f2577a43231ebf3 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Mon, 4 Dec 2017 15:23:51 +0200 Subject: net/mlx5: Stay in polling mode when command EQ destroy fails During unload, on mlx5_stop_eqs we move command interface from events mode to polling mode, but if command interface EQ destroy fail we move back to events mode. That's wrong since even if we fail to destroy command interface EQ, we do release its irq, so no interrupts will be received. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index ab4d1465b7e4..e7e7cef2bde4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -801,11 +801,9 @@ void mlx5_stop_eqs(struct mlx5_core_dev *dev) mlx5_cmd_use_polling(dev); err = mlx5_destroy_unmap_eq(dev, &table->cmd_eq); - if (err) { + if (err) mlx5_core_err(dev, "failed to destroy command eq, err(%d)\n", err); - mlx5_cmd_use_events(dev); - } } int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq, -- cgit v1.2.3-71-gd317 From 4ef928929987c19fff4d3c1650f139560ba1cc13 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 20 Dec 2017 08:38:46 +1000 Subject: drm/nouveau: fix obvious memory leak fdo#104340. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_vmm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_vmm.c b/drivers/gpu/drm/nouveau/nouveau_vmm.c index 9e2628dd8e4d..f5371d96b003 100644 --- a/drivers/gpu/drm/nouveau/nouveau_vmm.c +++ b/drivers/gpu/drm/nouveau/nouveau_vmm.c @@ -67,8 +67,8 @@ nouveau_vma_del(struct nouveau_vma **pvma) nvif_vmm_put(&vma->vmm->vmm, &tmp); } list_del(&vma->head); - *pvma = NULL; kfree(*pvma); + *pvma = NULL; } } -- cgit v1.2.3-71-gd317 From 19deaa217bc04e83b59b5e8c8229eb0e53ad9efc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 19 Dec 2017 15:07:10 -0800 Subject: libnvdimm, pfn: fix start_pad handling for aligned namespaces The alignment checks at pfn driver startup fail to properly account for the 'start_pad' in the case where the namespace is misaligned relative to its internal alignment. This is typically triggered in 1G aligned namespace, but could theoretically trigger with small namespace alignments. When this triggers the kernel reports messages of the form: dax2.1: bad offset: 0x3c000000 dax disabled align: 0x40000000 Cc: Fixes: 1ee6667cd8d1 ("libnvdimm, pfn, dax: fix initialization vs autodetect...") Reported-by: Jane Chu Signed-off-by: Dan Williams --- drivers/nvdimm/pfn_devs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c index 65cc171c721d..db2fc7c02e01 100644 --- a/drivers/nvdimm/pfn_devs.c +++ b/drivers/nvdimm/pfn_devs.c @@ -364,9 +364,9 @@ struct device *nd_pfn_create(struct nd_region *nd_region) int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) { u64 checksum, offset; - unsigned long align; enum nd_pfn_mode mode; struct nd_namespace_io *nsio; + unsigned long align, start_pad; struct nd_pfn_sb *pfn_sb = nd_pfn->pfn_sb; struct nd_namespace_common *ndns = nd_pfn->ndns; const u8 *parent_uuid = nd_dev_to_uuid(&ndns->dev); @@ -410,6 +410,7 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) align = le32_to_cpu(pfn_sb->align); offset = le64_to_cpu(pfn_sb->dataoff); + start_pad = le32_to_cpu(pfn_sb->start_pad); if (align == 0) align = 1UL << ilog2(offset); mode = le32_to_cpu(pfn_sb->mode); @@ -468,7 +469,7 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -EBUSY; } - if ((align && !IS_ALIGNED(offset, align)) + if ((align && !IS_ALIGNED(nsio->res.start + offset + start_pad, align)) || !IS_ALIGNED(offset, PAGE_SIZE)) { dev_err(&nd_pfn->dev, "bad offset: %#llx dax disabled align: %#lx\n", -- cgit v1.2.3-71-gd317 From 41fce90f26333c4fa82e8e43b9ace86c4e8a0120 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 4 Dec 2017 14:07:43 -0800 Subject: libnvdimm, dax: fix 1GB-aligned namespaces vs physical misalignment The following namespace configuration attempt: # ndctl create-namespace -e namespace0.0 -m devdax -a 1G -f libndctl: ndctl_dax_enable: dax0.1: failed to enable Error: namespace0.0: failed to enable failed to reconfigure namespace: No such device or address ...fails when the backing memory range is not physically aligned to 1G: # cat /proc/iomem | grep Persistent 210000000-30fffffff : Persistent Memory (legacy) In the above example the 4G persistent memory range starts and ends on a 256MB boundary. We handle this case correctly when needing to handle cases that violate section alignment (128MB) collisions against "System RAM", and we simply need to extend that padding/truncation for the 1GB alignment use case. Cc: Fixes: 315c562536c4 ("libnvdimm, pfn: add 'align' attribute...") Reported-and-tested-by: Jane Chu Signed-off-by: Dan Williams --- drivers/nvdimm/pfn_devs.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c index db2fc7c02e01..2adada1a5855 100644 --- a/drivers/nvdimm/pfn_devs.c +++ b/drivers/nvdimm/pfn_devs.c @@ -583,6 +583,12 @@ static struct vmem_altmap *__nvdimm_setup_pfn(struct nd_pfn *nd_pfn, return altmap; } +static u64 phys_pmem_align_down(struct nd_pfn *nd_pfn, u64 phys) +{ + return min_t(u64, PHYS_SECTION_ALIGN_DOWN(phys), + ALIGN_DOWN(phys, nd_pfn->align)); +} + static int nd_pfn_init(struct nd_pfn *nd_pfn) { u32 dax_label_reserve = is_nd_dax(&nd_pfn->dev) ? SZ_128K : 0; @@ -638,13 +644,16 @@ static int nd_pfn_init(struct nd_pfn *nd_pfn) start = nsio->res.start; size = PHYS_SECTION_ALIGN_UP(start + size) - start; if (region_intersects(start, size, IORESOURCE_SYSTEM_RAM, - IORES_DESC_NONE) == REGION_MIXED) { + IORES_DESC_NONE) == REGION_MIXED + || !IS_ALIGNED(start + resource_size(&nsio->res), + nd_pfn->align)) { size = resource_size(&nsio->res); - end_trunc = start + size - PHYS_SECTION_ALIGN_DOWN(start + size); + end_trunc = start + size - phys_pmem_align_down(nd_pfn, + start + size); } if (start_pad + end_trunc) - dev_info(&nd_pfn->dev, "%s section collision, truncate %d bytes\n", + dev_info(&nd_pfn->dev, "%s alignment collision, truncate %d bytes\n", dev_name(&ndns->dev), start_pad + end_trunc); /* -- cgit v1.2.3-71-gd317 From 2c08cd7c20968ddf71feeac2265b4741d2b3fdde Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 20 Dec 2017 11:52:47 +0100 Subject: drm/sun4i: hdmi: Move the mode_valid callback to the encoder When attached to the connector, the mode_valid callback will only filter the modes provided by the connector itself as part of its probe. However, it will not be doing it when the mode is provided by the userspace, which still might result in a broken configuration. In order to enforce these constraints, move our mode_valid callback to the encoder which doesn't have this behaviour. Acked-by: Daniel Vetter Signed-off-by: Hans Verkuil [maxime: Wrote the commit log in order to update the patch from the merged v3 to the v4 that was correct.] Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/0fa230a8-d01d-561a-f74f-6b4fd421255b@xs4all.nl --- drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 39 +++++++++++++++++----------------- 1 file changed, 20 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c index c12f9bd12904..500b6fb3e028 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c @@ -175,11 +175,31 @@ static void sun4i_hdmi_mode_set(struct drm_encoder *encoder, writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG); } +static enum drm_mode_status sun4i_hdmi_mode_valid(struct drm_encoder *encoder, + const struct drm_display_mode *mode) +{ + struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder); + unsigned long rate = mode->clock * 1000; + unsigned long diff = rate / 200; /* +-0.5% allowed by HDMI spec */ + long rounded_rate; + + /* 165 MHz is the typical max pixelclock frequency for HDMI <= 1.2 */ + if (rate > 165000000) + return MODE_CLOCK_HIGH; + rounded_rate = clk_round_rate(hdmi->tmds_clk, rate); + if (rounded_rate > 0 && + max_t(unsigned long, rounded_rate, rate) - + min_t(unsigned long, rounded_rate, rate) < diff) + return MODE_OK; + return MODE_NOCLOCK; +} + static const struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = { .atomic_check = sun4i_hdmi_atomic_check, .disable = sun4i_hdmi_disable, .enable = sun4i_hdmi_enable, .mode_set = sun4i_hdmi_mode_set, + .mode_valid = sun4i_hdmi_mode_valid, }; static const struct drm_encoder_funcs sun4i_hdmi_funcs = { @@ -208,27 +228,8 @@ static int sun4i_hdmi_get_modes(struct drm_connector *connector) return ret; } -static int sun4i_hdmi_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector); - long rate = mode->clock * 1000; - long diff = rate / 200; /* +-0.5% allowed by HDMI spec */ - long rounded_rate; - - /* 165 MHz is the typical max pixelclock frequency for HDMI <= 1.2 */ - if (rate > 165000000) - return MODE_CLOCK_HIGH; - rounded_rate = clk_round_rate(hdmi->tmds_clk, rate); - if (max(rounded_rate, rate) - min(rounded_rate, rate) < diff && - rounded_rate > 0) - return MODE_OK; - return MODE_NOCLOCK; -} - static const struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = { .get_modes = sun4i_hdmi_get_modes, - .mode_valid = sun4i_hdmi_mode_valid, }; static enum drm_connector_status -- cgit v1.2.3-71-gd317 From ce0769e0ea4b3e192466243a1a9fd39acf214f1e Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 20 Dec 2017 10:35:43 +0100 Subject: drm/plane: Make framebuffer refcounting the responsibility of setplane_internal callers lock_all_ctx in setplane_internal may return -EINTR, and __setplane_internal could return -EDEADLK. Making more special cases for fb would make the code even harder to read, so the easiest solution is not taking over the fb refcount, and making callers responsible for dropping the ref. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707 Fixes: 13736ba3b38b ("drm/legacy: Convert setplane ioctl locking to interruptible.") Testcase: kms_atomic_interruptible Signed-off-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-2-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter --- drivers/gpu/drm/drm_plane.c | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c index 37a93cdffb4a..2c90519576a3 100644 --- a/drivers/gpu/drm/drm_plane.c +++ b/drivers/gpu/drm/drm_plane.c @@ -558,11 +558,10 @@ int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format) } /* - * setplane_internal - setplane handler for internal callers + * __setplane_internal - setplane handler for internal callers * - * Note that we assume an extra reference has already been taken on fb. If the - * update fails, this reference will be dropped before return; if it succeeds, - * the previous framebuffer (if any) will be unreferenced instead. + * This function will take a reference on the new fb for the plane + * on success. * * src_{x,y,w,h} are provided in 16.16 fixed point format */ @@ -630,14 +629,12 @@ static int __setplane_internal(struct drm_plane *plane, if (!ret) { plane->crtc = crtc; plane->fb = fb; - fb = NULL; + drm_framebuffer_get(plane->fb); } else { plane->old_fb = NULL; } out: - if (fb) - drm_framebuffer_put(fb); if (plane->old_fb) drm_framebuffer_put(plane->old_fb); plane->old_fb = NULL; @@ -685,6 +682,7 @@ int drm_mode_setplane(struct drm_device *dev, void *data, struct drm_plane *plane; struct drm_crtc *crtc = NULL; struct drm_framebuffer *fb = NULL; + int ret; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; @@ -717,15 +715,16 @@ int drm_mode_setplane(struct drm_device *dev, void *data, } } - /* - * setplane_internal will take care of deref'ing either the old or new - * framebuffer depending on success. - */ - return setplane_internal(plane, crtc, fb, - plane_req->crtc_x, plane_req->crtc_y, - plane_req->crtc_w, plane_req->crtc_h, - plane_req->src_x, plane_req->src_y, - plane_req->src_w, plane_req->src_h); + ret = setplane_internal(plane, crtc, fb, + plane_req->crtc_x, plane_req->crtc_y, + plane_req->crtc_w, plane_req->crtc_h, + plane_req->src_x, plane_req->src_y, + plane_req->src_w, plane_req->src_h); + + if (fb) + drm_framebuffer_put(fb); + + return ret; } static int drm_mode_cursor_universal(struct drm_crtc *crtc, @@ -788,13 +787,12 @@ static int drm_mode_cursor_universal(struct drm_crtc *crtc, src_h = fb->height << 16; } - /* - * setplane_internal will take care of deref'ing either the old or new - * framebuffer depending on success. - */ ret = __setplane_internal(crtc->cursor, crtc, fb, - crtc_x, crtc_y, crtc_w, crtc_h, - 0, 0, src_w, src_h, ctx); + crtc_x, crtc_y, crtc_w, crtc_h, + 0, 0, src_w, src_h, ctx); + + if (fb) + drm_framebuffer_put(fb); /* Update successful; save new cursor position, if necessary */ if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) { -- cgit v1.2.3-71-gd317 From 4423c18e466afdfb02a36ee8b9f901d144b3c607 Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Tue, 19 Dec 2017 17:59:45 +0100 Subject: net: mvneta: clear interface link status on port disable When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Cc: Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev Tested-by: Dmitri Epshtein Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index bc93b69cfd1e..16b2bfb2cf51 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1214,6 +1214,10 @@ static void mvneta_port_disable(struct mvneta_port *pp) val &= ~MVNETA_GMAC0_PORT_ENABLE; mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); + pp->link = 0; + pp->duplex = -1; + pp->speed = 0; + udelay(200); } -- cgit v1.2.3-71-gd317 From ca5902a6547f662419689ca28b3c29a772446caa Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Tue, 19 Dec 2017 17:59:46 +0100 Subject: net: mvneta: use proper rxq_number in loop on rx queues When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Cc: stable@vger.kernel.org Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev Tested-by: Dmitri Epshtein Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 16b2bfb2cf51..1e0835655c93 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3015,7 +3015,7 @@ static void mvneta_cleanup_rxqs(struct mvneta_port *pp) { int queue; - for (queue = 0; queue < txq_number; queue++) + for (queue = 0; queue < rxq_number; queue++) mvneta_rxq_deinit(pp, &pp->rxqs[queue]); } -- cgit v1.2.3-71-gd317 From 2eecb2e04abb62ef8ea7b43e1a46bdb5b99d1bf8 Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Tue, 19 Dec 2017 17:59:47 +0100 Subject: net: mvneta: eliminate wrong call to handle rx descriptor error There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Cc: stable@vger.kernel.org Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev Tested-by: Dmitri Epshtein Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 1e0835655c93..a539263cd79c 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1962,9 +1962,9 @@ static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo, if (!mvneta_rxq_desc_is_first_last(rx_status) || (rx_status & MVNETA_RXD_ERR_SUMMARY)) { + mvneta_rx_error(pp, rx_desc); err_drop_frame: dev->stats.rx_errors++; - mvneta_rx_error(pp, rx_desc); /* leave the descriptor untouched */ continue; } -- cgit v1.2.3-71-gd317 From 102740bd9436a3a6ba129af3a48271d794009fa5 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 19 Dec 2017 13:32:13 -0800 Subject: cls_bpf: fix offload assumptions after callback conversion cls_bpf used to take care of tracking what offload state a filter is in, i.e. it would track if offload request succeeded or not. This information would then be used to issue correct requests to the driver, e.g. requests for statistics only on offloaded filters, removing only filters which were offloaded, using add instead of replace if previous filter was not added etc. This tracking of offload state no longer functions with the new callback infrastructure. There could be multiple entities trying to offload the same filter. Throw out all the tracking and corresponding commands and simply pass to the drivers both old and new bpf program. Drivers will have to deal with offload state tracking by themselves. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 12 +--- include/net/pkt_cls.h | 5 +- net/sched/cls_bpf.c | 93 +++++++++++---------------- 3 files changed, 43 insertions(+), 67 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index e379b78e86ef..a4cf62ba4604 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -110,16 +110,10 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, return -EOPNOTSUPP; } - switch (cls_bpf->command) { - case TC_CLSBPF_REPLACE: - return nfp_net_bpf_offload(nn, cls_bpf->prog, true); - case TC_CLSBPF_ADD: - return nfp_net_bpf_offload(nn, cls_bpf->prog, false); - case TC_CLSBPF_DESTROY: - return nfp_net_bpf_offload(nn, NULL, true); - default: + if (cls_bpf->command != TC_CLSBPF_OFFLOAD) return -EOPNOTSUPP; - } + + return nfp_net_bpf_offload(nn, cls_bpf->prog, cls_bpf->oldprog); } static int nfp_bpf_setup_tc_block(struct net_device *netdev, diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h index 0105445cab83..8e08b6da72f3 100644 --- a/include/net/pkt_cls.h +++ b/include/net/pkt_cls.h @@ -694,9 +694,7 @@ struct tc_cls_matchall_offload { }; enum tc_clsbpf_command { - TC_CLSBPF_ADD, - TC_CLSBPF_REPLACE, - TC_CLSBPF_DESTROY, + TC_CLSBPF_OFFLOAD, TC_CLSBPF_STATS, }; @@ -705,6 +703,7 @@ struct tc_cls_bpf_offload { enum tc_clsbpf_command command; struct tcf_exts *exts; struct bpf_prog *prog; + struct bpf_prog *oldprog; const char *name; bool exts_integrated; u32 gen_flags; diff --git a/net/sched/cls_bpf.c b/net/sched/cls_bpf.c index 6fe798c2df1a..8d78e7f4ecc3 100644 --- a/net/sched/cls_bpf.c +++ b/net/sched/cls_bpf.c @@ -42,7 +42,6 @@ struct cls_bpf_prog { struct list_head link; struct tcf_result res; bool exts_integrated; - bool offloaded; u32 gen_flags; struct tcf_exts exts; u32 handle; @@ -148,33 +147,37 @@ static bool cls_bpf_is_ebpf(const struct cls_bpf_prog *prog) } static int cls_bpf_offload_cmd(struct tcf_proto *tp, struct cls_bpf_prog *prog, - enum tc_clsbpf_command cmd) + struct cls_bpf_prog *oldprog) { - bool addorrep = cmd == TC_CLSBPF_ADD || cmd == TC_CLSBPF_REPLACE; struct tcf_block *block = tp->chain->block; - bool skip_sw = tc_skip_sw(prog->gen_flags); struct tc_cls_bpf_offload cls_bpf = {}; + struct cls_bpf_prog *obj; + bool skip_sw; int err; + skip_sw = prog && tc_skip_sw(prog->gen_flags); + obj = prog ?: oldprog; + tc_cls_common_offload_init(&cls_bpf.common, tp); - cls_bpf.command = cmd; - cls_bpf.exts = &prog->exts; - cls_bpf.prog = prog->filter; - cls_bpf.name = prog->bpf_name; - cls_bpf.exts_integrated = prog->exts_integrated; - cls_bpf.gen_flags = prog->gen_flags; + cls_bpf.command = TC_CLSBPF_OFFLOAD; + cls_bpf.exts = &obj->exts; + cls_bpf.prog = prog ? prog->filter : NULL; + cls_bpf.oldprog = oldprog ? oldprog->filter : NULL; + cls_bpf.name = obj->bpf_name; + cls_bpf.exts_integrated = obj->exts_integrated; + cls_bpf.gen_flags = obj->gen_flags; err = tc_setup_cb_call(block, NULL, TC_SETUP_CLSBPF, &cls_bpf, skip_sw); - if (addorrep) { + if (prog) { if (err < 0) { - cls_bpf_offload_cmd(tp, prog, TC_CLSBPF_DESTROY); + cls_bpf_offload_cmd(tp, oldprog, prog); return err; } else if (err > 0) { prog->gen_flags |= TCA_CLS_FLAGS_IN_HW; } } - if (addorrep && skip_sw && !(prog->gen_flags & TCA_CLS_FLAGS_IN_HW)) + if (prog && skip_sw && !(prog->gen_flags & TCA_CLS_FLAGS_IN_HW)) return -EINVAL; return 0; @@ -183,38 +186,17 @@ static int cls_bpf_offload_cmd(struct tcf_proto *tp, struct cls_bpf_prog *prog, static int cls_bpf_offload(struct tcf_proto *tp, struct cls_bpf_prog *prog, struct cls_bpf_prog *oldprog) { - struct cls_bpf_prog *obj = prog; - enum tc_clsbpf_command cmd; - bool skip_sw; - int ret; - - skip_sw = tc_skip_sw(prog->gen_flags) || - (oldprog && tc_skip_sw(oldprog->gen_flags)); - - if (oldprog && oldprog->offloaded) { - if (!tc_skip_hw(prog->gen_flags)) { - cmd = TC_CLSBPF_REPLACE; - } else if (!tc_skip_sw(prog->gen_flags)) { - obj = oldprog; - cmd = TC_CLSBPF_DESTROY; - } else { - return -EINVAL; - } - } else { - if (tc_skip_hw(prog->gen_flags)) - return skip_sw ? -EINVAL : 0; - cmd = TC_CLSBPF_ADD; - } - - ret = cls_bpf_offload_cmd(tp, obj, cmd); - if (ret) - return ret; + if (prog && oldprog && prog->gen_flags != oldprog->gen_flags) + return -EINVAL; - obj->offloaded = true; - if (oldprog) - oldprog->offloaded = false; + if (prog && tc_skip_hw(prog->gen_flags)) + prog = NULL; + if (oldprog && tc_skip_hw(oldprog->gen_flags)) + oldprog = NULL; + if (!prog && !oldprog) + return 0; - return 0; + return cls_bpf_offload_cmd(tp, prog, oldprog); } static void cls_bpf_stop_offload(struct tcf_proto *tp, @@ -222,25 +204,26 @@ static void cls_bpf_stop_offload(struct tcf_proto *tp, { int err; - if (!prog->offloaded) - return; - - err = cls_bpf_offload_cmd(tp, prog, TC_CLSBPF_DESTROY); - if (err) { + err = cls_bpf_offload_cmd(tp, NULL, prog); + if (err) pr_err("Stopping hardware offload failed: %d\n", err); - return; - } - - prog->offloaded = false; } static void cls_bpf_offload_update_stats(struct tcf_proto *tp, struct cls_bpf_prog *prog) { - if (!prog->offloaded) - return; + struct tcf_block *block = tp->chain->block; + struct tc_cls_bpf_offload cls_bpf = {}; + + tc_cls_common_offload_init(&cls_bpf.common, tp); + cls_bpf.command = TC_CLSBPF_STATS; + cls_bpf.exts = &prog->exts; + cls_bpf.prog = prog->filter; + cls_bpf.name = prog->bpf_name; + cls_bpf.exts_integrated = prog->exts_integrated; + cls_bpf.gen_flags = prog->gen_flags; - cls_bpf_offload_cmd(tp, prog, TC_CLSBPF_STATS); + tc_setup_cb_call(block, NULL, TC_SETUP_CLSBPF, &cls_bpf, false); } static int cls_bpf_init(struct tcf_proto *tp) -- cgit v1.2.3-71-gd317 From d3f89b98e391475419ae2d8834813d3ecbb48f67 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 19 Dec 2017 13:32:14 -0800 Subject: nfp: bpf: keep track of the offloaded program After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. The check for nn->dp.bpf_offload_xdp was a stop gap solution to make sure failed TC offload won't disable XDP, it's no longer necessary. nfp_net_bpf_offload() will return -EBUSY on TC vs XDP conflicts. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 47 ++++++++++++++++++++++++--- drivers/net/ethernet/netronome/nfp/bpf/main.h | 8 +++++ 2 files changed, 51 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index a4cf62ba4604..13190aa09faf 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -82,10 +82,33 @@ static const char *nfp_bpf_extra_cap(struct nfp_app *app, struct nfp_net *nn) return nfp_net_ebpf_capable(nn) ? "BPF" : ""; } +static int +nfp_bpf_vnic_alloc(struct nfp_app *app, struct nfp_net *nn, unsigned int id) +{ + int err; + + nn->app_priv = kzalloc(sizeof(struct nfp_bpf_vnic), GFP_KERNEL); + if (!nn->app_priv) + return -ENOMEM; + + err = nfp_app_nic_vnic_alloc(app, nn, id); + if (err) + goto err_free_priv; + + return 0; +err_free_priv: + kfree(nn->app_priv); + return err; +} + static void nfp_bpf_vnic_free(struct nfp_app *app, struct nfp_net *nn) { + struct nfp_bpf_vnic *bv = nn->app_priv; + if (nn->dp.bpf_offload_xdp) nfp_bpf_xdp_offload(app, nn, NULL); + WARN_ON(bv->tc_prog); + kfree(bv); } static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, @@ -93,6 +116,9 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, { struct tc_cls_bpf_offload *cls_bpf = type_data; struct nfp_net *nn = cb_priv; + struct bpf_prog *oldprog; + struct nfp_bpf_vnic *bv; + int err; if (type != TC_SETUP_CLSBPF || !tc_can_offload(nn->dp.netdev) || @@ -100,8 +126,6 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, cls_bpf->common.protocol != htons(ETH_P_ALL) || cls_bpf->common.chain_index) return -EOPNOTSUPP; - if (nn->dp.bpf_offload_xdp) - return -EBUSY; /* Only support TC direct action */ if (!cls_bpf->exts_integrated || @@ -113,7 +137,22 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, if (cls_bpf->command != TC_CLSBPF_OFFLOAD) return -EOPNOTSUPP; - return nfp_net_bpf_offload(nn, cls_bpf->prog, cls_bpf->oldprog); + bv = nn->app_priv; + oldprog = cls_bpf->oldprog; + + /* Don't remove if oldprog doesn't match driver's state */ + if (bv->tc_prog != oldprog) { + oldprog = NULL; + if (!cls_bpf->prog) + return 0; + } + + err = nfp_net_bpf_offload(nn, cls_bpf->prog, oldprog); + if (err) + return err; + + bv->tc_prog = cls_bpf->prog; + return 0; } static int nfp_bpf_setup_tc_block(struct net_device *netdev, @@ -161,7 +200,7 @@ const struct nfp_app_type app_bpf = { .extra_cap = nfp_bpf_extra_cap, - .vnic_alloc = nfp_app_nic_vnic_alloc, + .vnic_alloc = nfp_bpf_vnic_alloc, .vnic_free = nfp_bpf_vnic_free, .setup_tc = nfp_bpf_setup_tc, diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.h b/drivers/net/ethernet/netronome/nfp/bpf/main.h index 082a15f6dfb5..57b6043177a3 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.h +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.h @@ -172,6 +172,14 @@ struct nfp_prog { struct list_head insns; }; +/** + * struct nfp_bpf_vnic - per-vNIC BPF priv structure + * @tc_prog: currently loaded cls_bpf program + */ +struct nfp_bpf_vnic { + struct bpf_prog *tc_prog; +}; + int nfp_bpf_jit(struct nfp_prog *prog); extern const struct bpf_ext_analyzer_ops nfp_bpf_analyzer_ops; -- cgit v1.2.3-71-gd317 From b3cf8528bb21febb650a7ecbf080d0647be40b9f Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Tue, 12 Dec 2017 15:08:21 -0500 Subject: xen/balloon: Mark unallocated host memory as UNUSABLE Commit f5775e0b6116 ("x86/xen: discard RAM regions above the maximum reservation") left host memory not assigned to dom0 as available for memory hotplug. Unfortunately this also meant that those regions could be used by others. Specifically, commit fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") may try to map those addresses as MMIO. To prevent this mark unallocated host memory as E820_TYPE_UNUSABLE (thus effectively reverting f5775e0b6116) and keep track of that region as a hostmem resource that can be used for the hotplug. Signed-off-by: Boris Ostrovsky Reviewed-by: Juergen Gross --- arch/x86/xen/enlighten.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/xen/setup.c | 6 ++-- drivers/xen/balloon.c | 65 ++++++++++++++++++++++++++++++++------ include/xen/balloon.h | 5 +++ 4 files changed, 144 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index d669e9d89001..c9081c6671f0 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1,8 +1,12 @@ +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG +#include +#endif #include #include #include #include +#include #include #include @@ -331,3 +335,80 @@ void xen_arch_unregister_cpu(int num) } EXPORT_SYMBOL(xen_arch_unregister_cpu); #endif + +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG +void __init arch_xen_balloon_init(struct resource *hostmem_resource) +{ + struct xen_memory_map memmap; + int rc; + unsigned int i, last_guest_ram; + phys_addr_t max_addr = PFN_PHYS(max_pfn); + struct e820_table *xen_e820_table; + const struct e820_entry *entry; + struct resource *res; + + if (!xen_initial_domain()) + return; + + xen_e820_table = kmalloc(sizeof(*xen_e820_table), GFP_KERNEL); + if (!xen_e820_table) + return; + + memmap.nr_entries = ARRAY_SIZE(xen_e820_table->entries); + set_xen_guest_handle(memmap.buffer, xen_e820_table->entries); + rc = HYPERVISOR_memory_op(XENMEM_machine_memory_map, &memmap); + if (rc) { + pr_warn("%s: Can't read host e820 (%d)\n", __func__, rc); + goto out; + } + + last_guest_ram = 0; + for (i = 0; i < memmap.nr_entries; i++) { + if (xen_e820_table->entries[i].addr >= max_addr) + break; + if (xen_e820_table->entries[i].type == E820_TYPE_RAM) + last_guest_ram = i; + } + + entry = &xen_e820_table->entries[last_guest_ram]; + if (max_addr >= entry->addr + entry->size) + goto out; /* No unallocated host RAM. */ + + hostmem_resource->start = max_addr; + hostmem_resource->end = entry->addr + entry->size; + + /* + * Mark non-RAM regions between the end of dom0 RAM and end of host RAM + * as unavailable. The rest of that region can be used for hotplug-based + * ballooning. + */ + for (; i < memmap.nr_entries; i++) { + entry = &xen_e820_table->entries[i]; + + if (entry->type == E820_TYPE_RAM) + continue; + + if (entry->addr >= hostmem_resource->end) + break; + + res = kzalloc(sizeof(*res), GFP_KERNEL); + if (!res) + goto out; + + res->name = "Unavailable host RAM"; + res->start = entry->addr; + res->end = (entry->addr + entry->size < hostmem_resource->end) ? + entry->addr + entry->size : hostmem_resource->end; + rc = insert_resource(hostmem_resource, res); + if (rc) { + pr_warn("%s: Can't insert [%llx - %llx) (%d)\n", + __func__, res->start, res->end, rc); + kfree(res); + goto out; + } + } + + out: + kfree(xen_e820_table); +} +#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ac55c02f98e9..e9011e1ee3de 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -807,7 +807,6 @@ char * __init xen_memory_setup(void) addr = xen_e820_table.entries[0].addr; size = xen_e820_table.entries[0].size; while (i < xen_e820_table.nr_entries) { - bool discard = false; chunk_size = size; type = xen_e820_table.entries[i].type; @@ -823,11 +822,10 @@ char * __init xen_memory_setup(void) xen_add_extra_mem(pfn_s, n_pfns); xen_max_p2m_pfn = pfn_s + n_pfns; } else - discard = true; + type = E820_TYPE_UNUSABLE; } - if (!discard) - xen_align_and_add_e820_region(addr, chunk_size, type); + xen_align_and_add_e820_region(addr, chunk_size, type); addr += chunk_size; size -= chunk_size; diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index f77e499afddd..065f0b607373 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -257,10 +257,25 @@ static void release_memory_resource(struct resource *resource) kfree(resource); } +/* + * Host memory not allocated to dom0. We can use this range for hotplug-based + * ballooning. + * + * It's a type-less resource. Setting IORESOURCE_MEM will make resource + * management algorithms (arch_remove_reservations()) look into guest e820, + * which we don't want. + */ +static struct resource hostmem_resource = { + .name = "Host RAM", +}; + +void __attribute__((weak)) __init arch_xen_balloon_init(struct resource *res) +{} + static struct resource *additional_memory_resource(phys_addr_t size) { - struct resource *res; - int ret; + struct resource *res, *res_hostmem; + int ret = -ENOMEM; res = kzalloc(sizeof(*res), GFP_KERNEL); if (!res) @@ -269,13 +284,42 @@ static struct resource *additional_memory_resource(phys_addr_t size) res->name = "System RAM"; res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; - ret = allocate_resource(&iomem_resource, res, - size, 0, -1, - PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); - if (ret < 0) { - pr_err("Cannot allocate new System RAM resource\n"); - kfree(res); - return NULL; + res_hostmem = kzalloc(sizeof(*res), GFP_KERNEL); + if (res_hostmem) { + /* Try to grab a range from hostmem */ + res_hostmem->name = "Host memory"; + ret = allocate_resource(&hostmem_resource, res_hostmem, + size, 0, -1, + PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); + } + + if (!ret) { + /* + * Insert this resource into iomem. Because hostmem_resource + * tracks portion of guest e820 marked as UNUSABLE noone else + * should try to use it. + */ + res->start = res_hostmem->start; + res->end = res_hostmem->end; + ret = insert_resource(&iomem_resource, res); + if (ret < 0) { + pr_err("Can't insert iomem_resource [%llx - %llx]\n", + res->start, res->end); + release_memory_resource(res_hostmem); + res_hostmem = NULL; + res->start = res->end = 0; + } + } + + if (ret) { + ret = allocate_resource(&iomem_resource, res, + size, 0, -1, + PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); + if (ret < 0) { + pr_err("Cannot allocate new System RAM resource\n"); + kfree(res); + return NULL; + } } #ifdef CONFIG_SPARSEMEM @@ -287,6 +331,7 @@ static struct resource *additional_memory_resource(phys_addr_t size) pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n", pfn, limit); release_memory_resource(res); + release_memory_resource(res_hostmem); return NULL; } } @@ -765,6 +810,8 @@ static int __init balloon_init(void) set_online_page_callback(&xen_online_page); register_memory_notifier(&xen_memory_nb); register_sysctl_table(xen_root); + + arch_xen_balloon_init(&hostmem_resource); #endif #ifdef CONFIG_XEN_PV diff --git a/include/xen/balloon.h b/include/xen/balloon.h index 8906361bb50c..d0adfc78dcbd 100644 --- a/include/xen/balloon.h +++ b/include/xen/balloon.h @@ -43,3 +43,8 @@ static inline void xen_balloon_init(void) { } #endif + +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG +struct resource; +void arch_xen_balloon_init(struct resource *hostmem_resource); +#endif -- cgit v1.2.3-71-gd317 From ad3cbf61332914711e5f506972b1dc9af8d62146 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 20 Dec 2017 18:07:18 +0100 Subject: s390/qeth: fix error handling in checksum cmd callback Make sure to check both return code fields before processing the response. Otherwise we risk operating on invalid data. Fixes: c9475369bd2b ("s390/qeth: rework RX/TX checksum offload") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 6c815207f4f5..3614df68830f 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5386,6 +5386,13 @@ out: } EXPORT_SYMBOL_GPL(qeth_poll); +static int qeth_setassparms_inspect_rc(struct qeth_ipa_cmd *cmd) +{ + if (!cmd->hdr.return_code) + cmd->hdr.return_code = cmd->data.setassparms.hdr.return_code; + return cmd->hdr.return_code; +} + int qeth_setassparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) { @@ -6242,7 +6249,7 @@ static int qeth_ipa_checksum_run_cmd_cb(struct qeth_card *card, (struct qeth_checksum_cmd *)reply->param; QETH_CARD_TEXT(card, 4, "chkdoccb"); - if (cmd->hdr.return_code) + if (qeth_setassparms_inspect_rc(cmd)) return 0; memset(chksum_cb, 0, sizeof(*chksum_cb)); -- cgit v1.2.3-71-gd317 From 0864fe09ab90ab32b7d21fe3cd72df5b5af8492e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 20 Dec 2017 13:14:42 -0700 Subject: null_blk: unalign call_single_data Commit 966a967116e6 randomly added alignment to this structure, but it's actually detrimental to performance of null_blk. Test case: Running on both the home and remote node shows a ~5% degradation in performance. While in there, move blk_status_t to the hole after the integer tag in the nullb_cmd structure. After this patch, we shrink the size from 192 to 152 bytes. Fixes: 966a967116e69 ("smp: Avoid using two cache lines for struct call_single_data") Signed-off-by: Jens Axboe --- drivers/block/null_blk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c index ccb9975a97fa..ad0477ae820f 100644 --- a/drivers/block/null_blk.c +++ b/drivers/block/null_blk.c @@ -35,13 +35,13 @@ static inline u64 mb_per_tick(int mbps) struct nullb_cmd { struct list_head list; struct llist_node ll_list; - call_single_data_t csd; + struct __call_single_data csd; struct request *rq; struct bio *bio; unsigned int tag; + blk_status_t error; struct nullb_queue *nq; struct hrtimer timer; - blk_status_t error; }; struct nullb_queue { -- cgit v1.2.3-71-gd317 From d1b8b2391c24751e44f618fcf86fb55d9a9247fd Mon Sep 17 00:00:00 2001 From: Cathy Avery Date: Tue, 19 Dec 2017 13:32:48 -0500 Subject: scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN which has zero good_bytes it must be assigned an error. Otherwise the I/O will be continuously requeued and will cause a deadlock in the case where disks are being hot added and removed. sd_probe_async will wait forever for its I/O to complete while holding scsi_sd_probe_domain. Also returning the default error of DID_TARGET_FAILURE causes multipath to not retry the I/O resulting in applications receiving I/O errors before a failover can occur. Signed-off-by: Cathy Avery Signed-off-by: Long Li Reviewed-by: Stephen Hemminger Signed-off-by: Martin K. Petersen --- drivers/scsi/storvsc_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 1b06cf0375dc..3b3d1d050cac 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -953,10 +953,11 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb, case TEST_UNIT_READY: break; default: - set_host_byte(scmnd, DID_TARGET_FAILURE); + set_host_byte(scmnd, DID_ERROR); } break; case SRB_STATUS_INVALID_LUN: + set_host_byte(scmnd, DID_NO_CONNECT); do_work = true; process_err_fn = storvsc_remove_lun; break; -- cgit v1.2.3-71-gd317 From d2a48e52541cdf474ef35d51e8d73ded5be33122 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 20 Dec 2017 22:54:24 -0800 Subject: drm: move lease init after validation in drm_lease_create Patch bd36d3bab2e3d08f80766c86487090dbceed4651 fixed a deadlock in the failure path of drm_lease_create. This made the partially initialized lease object visible for a short window of time. To avoid having the lessee state appear transiently, I've rearranged the code so that the lessor fields are not filled in until the parameters are all validated and the function will succeed. Signed-off-by: Keith Packard Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20171221065424.1304-1-keithp@keithp.com --- drivers/gpu/drm/drm_lease.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_lease.c b/drivers/gpu/drm/drm_lease.c index 59849f02e2ad..1402c0e71b03 100644 --- a/drivers/gpu/drm/drm_lease.c +++ b/drivers/gpu/drm/drm_lease.c @@ -220,17 +220,6 @@ static struct drm_master *drm_lease_create(struct drm_master *lessor, struct idr mutex_lock(&dev->mode_config.idr_mutex); - /* Insert the new lessee into the tree */ - id = idr_alloc(&(drm_lease_owner(lessor)->lessee_idr), lessee, 1, 0, GFP_KERNEL); - if (id < 0) { - error = id; - goto out_lessee; - } - - lessee->lessee_id = id; - lessee->lessor = drm_master_get(lessor); - list_add_tail(&lessee->lessee_list, &lessor->lessees); - idr_for_each_entry(leases, entry, object) { error = 0; if (!idr_find(&dev->mode_config.crtc_idr, object)) @@ -246,6 +235,17 @@ static struct drm_master *drm_lease_create(struct drm_master *lessor, struct idr } } + /* Insert the new lessee into the tree */ + id = idr_alloc(&(drm_lease_owner(lessor)->lessee_idr), lessee, 1, 0, GFP_KERNEL); + if (id < 0) { + error = id; + goto out_lessee; + } + + lessee->lessee_id = id; + lessee->lessor = drm_master_get(lessor); + list_add_tail(&lessee->lessee_list, &lessor->lessees); + /* Move the leases over */ lessee->leases = *leases; DRM_DEBUG_LEASE("new lessee %d %p, lessor %d %p\n", lessee->lessee_id, lessee, lessor->lessee_id, lessor); -- cgit v1.2.3-71-gd317 From 966031f340185eddd05affcf72b740549f056348 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 20 Dec 2017 17:57:06 -0800 Subject: n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD) We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa Reported-by: syzkaller Cc: Jiri Slaby Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 427e0d5d8f13..539b49adb6af 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1762,7 +1762,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) { struct n_tty_data *ldata = tty->disc_data; - if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) { + if (!old || (old->c_lflag ^ tty->termios.c_lflag) & (ICANON | EXTPROC)) { bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); ldata->line_start = ldata->read_tail; if (!L_ICANON(tty) || !read_cnt(ldata)) { @@ -2425,7 +2425,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, return put_user(tty_chars_in_buffer(tty), (int __user *) arg); case TIOCINQ: down_write(&tty->termios_rwsem); - if (L_ICANON(tty)) + if (L_ICANON(tty) && !L_EXTPROC(tty)) retval = inq_canon(ldata); else retval = read_cnt(ldata); -- cgit v1.2.3-71-gd317 From 8bc0d7ac934b6f2d0dc8f38a3104d281c9db1e98 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Tue, 19 Dec 2017 22:24:10 -0200 Subject: i915: Reject CCS modifiers for pipe C on Geminilake Current code advertises (on the modifiers blob property) support for CCS modifier for pipe C on GLK, only to reject it later when validating the request before the atomic commit. This fixes the tests igt@kms_ccs@pipe-c-*, which should skip on GLK for pipe C (see bug 104096). A relevant discussion is archived at: https://lists.freedesktop.org/archives/intel-gfx/2017-December/150646.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104096 Signed-off-by: Gabriel Krisman Bertazi Cc: Ben Widawsky Reviewed-by: Ben Widawsky Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20171220002410.5604-1-krisman@collabora.co.uk (cherry picked from commit f0cbd8bd877f3d8c5b80a6b1add9ca9010d7f9d8) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ff9397030092..30cf273d57aa 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13194,7 +13194,7 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe); primary->check_plane = intel_check_primary_plane; - if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) { + if (INTEL_GEN(dev_priv) >= 10) { intel_primary_formats = skl_primary_formats; num_formats = ARRAY_SIZE(skl_primary_formats); modifiers = skl_format_modifiers_ccs; -- cgit v1.2.3-71-gd317 From 13b7954c0b8dd2d6382b4ddb5053f09e389d5c6e Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 14 Dec 2017 17:26:13 -0700 Subject: libnvdimm, btt: add a couple of missing kernel-doc lines Recent updates to btt.h neglected to add corresponding kernel-doc lines for new structure members. Add them. Signed-off-by: Vishal Verma Signed-off-by: Dan Williams --- drivers/nvdimm/btt.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/nvdimm/btt.h b/drivers/nvdimm/btt.h index 578c2057524d..884fbbbdd18a 100644 --- a/drivers/nvdimm/btt.h +++ b/drivers/nvdimm/btt.h @@ -125,6 +125,7 @@ struct aligned_lock { * @list: List head for list of arenas * @debugfs_dir: Debugfs dentry * @flags: Arena flags - may signify error states. + * @err_lock: Mutex for synchronizing error clearing. * * arena_info is a per-arena handle. Once an arena is narrowed down for an * IO, this struct is passed around for the duration of the IO. @@ -176,6 +177,7 @@ struct arena_info { * @init_lock: Mutex used for the BTT initialization * @init_state: Flag describing the initialization state for the BTT * @num_arenas: Number of arenas in the BTT instance + * @phys_bb: Pointer to the namespace's badblocks structure */ struct btt { struct gendisk *btt_disk; -- cgit v1.2.3-71-gd317 From 24e3a7fb60a9187e5df90e5fa655ffc94b9c4f77 Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Mon, 18 Dec 2017 09:28:39 -0700 Subject: libnvdimm, btt: Fix an incompatibility in the log layout Due to a spec misinterpretation, the Linux implementation of the BTT log area had different padding scheme from other implementations, such as UEFI and NVML. This fixes the padding scheme, and defaults to it for new BTT layouts. We attempt to detect the padding scheme in use when probing for an existing BTT. If we detect the older/incompatible scheme, we continue using it. Reported-by: Juston Li Cc: Dan Williams Cc: Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Signed-off-by: Vishal Verma Signed-off-by: Dan Williams --- drivers/nvdimm/btt.c | 201 ++++++++++++++++++++++++++++++++++++++++++--------- drivers/nvdimm/btt.h | 45 +++++++++++- 2 files changed, 211 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c index e949e3302af4..c586bcdb5190 100644 --- a/drivers/nvdimm/btt.c +++ b/drivers/nvdimm/btt.c @@ -211,12 +211,12 @@ static int btt_map_read(struct arena_info *arena, u32 lba, u32 *mapping, return ret; } -static int btt_log_read_pair(struct arena_info *arena, u32 lane, - struct log_entry *ent) +static int btt_log_group_read(struct arena_info *arena, u32 lane, + struct log_group *log) { return arena_read_bytes(arena, - arena->logoff + (2 * lane * LOG_ENT_SIZE), ent, - 2 * LOG_ENT_SIZE, 0); + arena->logoff + (lane * LOG_GRP_SIZE), log, + LOG_GRP_SIZE, 0); } static struct dentry *debugfs_root; @@ -256,6 +256,8 @@ static void arena_debugfs_init(struct arena_info *a, struct dentry *parent, debugfs_create_x64("logoff", S_IRUGO, d, &a->logoff); debugfs_create_x64("info2off", S_IRUGO, d, &a->info2off); debugfs_create_x32("flags", S_IRUGO, d, &a->flags); + debugfs_create_u32("log_index_0", S_IRUGO, d, &a->log_index[0]); + debugfs_create_u32("log_index_1", S_IRUGO, d, &a->log_index[1]); } static void btt_debugfs_init(struct btt *btt) @@ -274,6 +276,11 @@ static void btt_debugfs_init(struct btt *btt) } } +static u32 log_seq(struct log_group *log, int log_idx) +{ + return le32_to_cpu(log->ent[log_idx].seq); +} + /* * This function accepts two log entries, and uses the * sequence number to find the 'older' entry. @@ -283,8 +290,10 @@ static void btt_debugfs_init(struct btt *btt) * * TODO The logic feels a bit kludge-y. make it better.. */ -static int btt_log_get_old(struct log_entry *ent) +static int btt_log_get_old(struct arena_info *a, struct log_group *log) { + int idx0 = a->log_index[0]; + int idx1 = a->log_index[1]; int old; /* @@ -292,23 +301,23 @@ static int btt_log_get_old(struct log_entry *ent) * the next time, the following logic works out to put this * (next) entry into [1] */ - if (ent[0].seq == 0) { - ent[0].seq = cpu_to_le32(1); + if (log_seq(log, idx0) == 0) { + log->ent[idx0].seq = cpu_to_le32(1); return 0; } - if (ent[0].seq == ent[1].seq) + if (log_seq(log, idx0) == log_seq(log, idx1)) return -EINVAL; - if (le32_to_cpu(ent[0].seq) + le32_to_cpu(ent[1].seq) > 5) + if (log_seq(log, idx0) + log_seq(log, idx1) > 5) return -EINVAL; - if (le32_to_cpu(ent[0].seq) < le32_to_cpu(ent[1].seq)) { - if (le32_to_cpu(ent[1].seq) - le32_to_cpu(ent[0].seq) == 1) + if (log_seq(log, idx0) < log_seq(log, idx1)) { + if ((log_seq(log, idx1) - log_seq(log, idx0)) == 1) old = 0; else old = 1; } else { - if (le32_to_cpu(ent[0].seq) - le32_to_cpu(ent[1].seq) == 1) + if ((log_seq(log, idx0) - log_seq(log, idx1)) == 1) old = 1; else old = 0; @@ -328,17 +337,18 @@ static int btt_log_read(struct arena_info *arena, u32 lane, { int ret; int old_ent, ret_ent; - struct log_entry log[2]; + struct log_group log; - ret = btt_log_read_pair(arena, lane, log); + ret = btt_log_group_read(arena, lane, &log); if (ret) return -EIO; - old_ent = btt_log_get_old(log); + old_ent = btt_log_get_old(arena, &log); if (old_ent < 0 || old_ent > 1) { dev_err(to_dev(arena), "log corruption (%d): lane %d seq [%d, %d]\n", - old_ent, lane, log[0].seq, log[1].seq); + old_ent, lane, log.ent[arena->log_index[0]].seq, + log.ent[arena->log_index[1]].seq); /* TODO set error state? */ return -EIO; } @@ -346,7 +356,7 @@ static int btt_log_read(struct arena_info *arena, u32 lane, ret_ent = (old_flag ? old_ent : (1 - old_ent)); if (ent != NULL) - memcpy(ent, &log[ret_ent], LOG_ENT_SIZE); + memcpy(ent, &log.ent[arena->log_index[ret_ent]], LOG_ENT_SIZE); return ret_ent; } @@ -360,17 +370,13 @@ static int __btt_log_write(struct arena_info *arena, u32 lane, u32 sub, struct log_entry *ent, unsigned long flags) { int ret; - /* - * Ignore the padding in log_entry for calculating log_half. - * The entry is 'committed' when we write the sequence number, - * and we want to ensure that that is the last thing written. - * We don't bother writing the padding as that would be extra - * media wear and write amplification - */ - unsigned int log_half = (LOG_ENT_SIZE - 2 * sizeof(u64)) / 2; - u64 ns_off = arena->logoff + (((2 * lane) + sub) * LOG_ENT_SIZE); + u32 group_slot = arena->log_index[sub]; + unsigned int log_half = LOG_ENT_SIZE / 2; void *src = ent; + u64 ns_off; + ns_off = arena->logoff + (lane * LOG_GRP_SIZE) + + (group_slot * LOG_ENT_SIZE); /* split the 16B write into atomic, durable halves */ ret = arena_write_bytes(arena, ns_off, src, log_half, flags); if (ret) @@ -453,7 +459,7 @@ static int btt_log_init(struct arena_info *arena) { size_t logsize = arena->info2off - arena->logoff; size_t chunk_size = SZ_4K, offset = 0; - struct log_entry log; + struct log_entry ent; void *zerobuf; int ret; u32 i; @@ -485,11 +491,11 @@ static int btt_log_init(struct arena_info *arena) } for (i = 0; i < arena->nfree; i++) { - log.lba = cpu_to_le32(i); - log.old_map = cpu_to_le32(arena->external_nlba + i); - log.new_map = cpu_to_le32(arena->external_nlba + i); - log.seq = cpu_to_le32(LOG_SEQ_INIT); - ret = __btt_log_write(arena, i, 0, &log, 0); + ent.lba = cpu_to_le32(i); + ent.old_map = cpu_to_le32(arena->external_nlba + i); + ent.new_map = cpu_to_le32(arena->external_nlba + i); + ent.seq = cpu_to_le32(LOG_SEQ_INIT); + ret = __btt_log_write(arena, i, 0, &ent, 0); if (ret) goto free; } @@ -594,6 +600,123 @@ static int btt_freelist_init(struct arena_info *arena) return 0; } +static bool ent_is_padding(struct log_entry *ent) +{ + return (ent->lba == 0) && (ent->old_map == 0) && (ent->new_map == 0) + && (ent->seq == 0); +} + +/* + * Detecting valid log indices: We read a log group (see the comments in btt.h + * for a description of a 'log_group' and its 'slots'), and iterate over its + * four slots. We expect that a padding slot will be all-zeroes, and use this + * to detect a padding slot vs. an actual entry. + * + * If a log_group is in the initial state, i.e. hasn't been used since the + * creation of this BTT layout, it will have three of the four slots with + * zeroes. We skip over these log_groups for the detection of log_index. If + * all log_groups are in the initial state (i.e. the BTT has never been + * written to), it is safe to assume the 'new format' of log entries in slots + * (0, 1). + */ +static int log_set_indices(struct arena_info *arena) +{ + bool idx_set = false, initial_state = true; + int ret, log_index[2] = {-1, -1}; + u32 i, j, next_idx = 0; + struct log_group log; + u32 pad_count = 0; + + for (i = 0; i < arena->nfree; i++) { + ret = btt_log_group_read(arena, i, &log); + if (ret < 0) + return ret; + + for (j = 0; j < 4; j++) { + if (!idx_set) { + if (ent_is_padding(&log.ent[j])) { + pad_count++; + continue; + } else { + /* Skip if index has been recorded */ + if ((next_idx == 1) && + (j == log_index[0])) + continue; + /* valid entry, record index */ + log_index[next_idx] = j; + next_idx++; + } + if (next_idx == 2) { + /* two valid entries found */ + idx_set = true; + } else if (next_idx > 2) { + /* too many valid indices */ + return -ENXIO; + } + } else { + /* + * once the indices have been set, just verify + * that all subsequent log groups are either in + * their initial state or follow the same + * indices. + */ + if (j == log_index[0]) { + /* entry must be 'valid' */ + if (ent_is_padding(&log.ent[j])) + return -ENXIO; + } else if (j == log_index[1]) { + ; + /* + * log_index[1] can be padding if the + * lane never got used and it is still + * in the initial state (three 'padding' + * entries) + */ + } else { + /* entry must be invalid (padding) */ + if (!ent_is_padding(&log.ent[j])) + return -ENXIO; + } + } + } + /* + * If any of the log_groups have more than one valid, + * non-padding entry, then the we are no longer in the + * initial_state + */ + if (pad_count < 3) + initial_state = false; + pad_count = 0; + } + + if (!initial_state && !idx_set) + return -ENXIO; + + /* + * If all the entries in the log were in the initial state, + * assume new padding scheme + */ + if (initial_state) + log_index[1] = 1; + + /* + * Only allow the known permutations of log/padding indices, + * i.e. (0, 1), and (0, 2) + */ + if ((log_index[0] == 0) && ((log_index[1] == 1) || (log_index[1] == 2))) + ; /* known index possibilities */ + else { + dev_err(to_dev(arena), "Found an unknown padding scheme\n"); + return -ENXIO; + } + + arena->log_index[0] = log_index[0]; + arena->log_index[1] = log_index[1]; + dev_dbg(to_dev(arena), "log_index_0 = %d\n", log_index[0]); + dev_dbg(to_dev(arena), "log_index_1 = %d\n", log_index[1]); + return 0; +} + static int btt_rtt_init(struct arena_info *arena) { arena->rtt = kcalloc(arena->nfree, sizeof(u32), GFP_KERNEL); @@ -650,8 +773,7 @@ static struct arena_info *alloc_arena(struct btt *btt, size_t size, available -= 2 * BTT_PG_SIZE; /* The log takes a fixed amount of space based on nfree */ - logsize = roundup(2 * arena->nfree * sizeof(struct log_entry), - BTT_PG_SIZE); + logsize = roundup(arena->nfree * LOG_GRP_SIZE, BTT_PG_SIZE); available -= logsize; /* Calculate optimal split between map and data area */ @@ -668,6 +790,10 @@ static struct arena_info *alloc_arena(struct btt *btt, size_t size, arena->mapoff = arena->dataoff + datasize; arena->logoff = arena->mapoff + mapsize; arena->info2off = arena->logoff + logsize; + + /* Default log indices are (0,1) */ + arena->log_index[0] = 0; + arena->log_index[1] = 1; return arena; } @@ -758,6 +884,13 @@ static int discover_arenas(struct btt *btt) arena->external_lba_start = cur_nlba; parse_arena_meta(arena, super, cur_off); + ret = log_set_indices(arena); + if (ret) { + dev_err(to_dev(arena), + "Unable to deduce log/padding indices\n"); + goto out; + } + mutex_init(&arena->err_lock); ret = btt_freelist_init(arena); if (ret) diff --git a/drivers/nvdimm/btt.h b/drivers/nvdimm/btt.h index 884fbbbdd18a..db3cb6d4d0d4 100644 --- a/drivers/nvdimm/btt.h +++ b/drivers/nvdimm/btt.h @@ -27,6 +27,7 @@ #define MAP_ERR_MASK (1 << MAP_ERR_SHIFT) #define MAP_LBA_MASK (~((1 << MAP_TRIM_SHIFT) | (1 << MAP_ERR_SHIFT))) #define MAP_ENT_NORMAL 0xC0000000 +#define LOG_GRP_SIZE sizeof(struct log_group) #define LOG_ENT_SIZE sizeof(struct log_entry) #define ARENA_MIN_SIZE (1UL << 24) /* 16 MB */ #define ARENA_MAX_SIZE (1ULL << 39) /* 512 GB */ @@ -50,12 +51,52 @@ enum btt_init_state { INIT_READY }; +/* + * A log group represents one log 'lane', and consists of four log entries. + * Two of the four entries are valid entries, and the remaining two are + * padding. Due to an old bug in the padding location, we need to perform a + * test to determine the padding scheme being used, and use that scheme + * thereafter. + * + * In kernels prior to 4.15, 'log group' would have actual log entries at + * indices (0, 2) and padding at indices (1, 3), where as the correct/updated + * format has log entries at indices (0, 1) and padding at indices (2, 3). + * + * Old (pre 4.15) format: + * +-----------------+-----------------+ + * | ent[0] | ent[1] | + * | 16B | 16B | + * | lba/old/new/seq | pad | + * +-----------------------------------+ + * | ent[2] | ent[3] | + * | 16B | 16B | + * | lba/old/new/seq | pad | + * +-----------------+-----------------+ + * + * New format: + * +-----------------+-----------------+ + * | ent[0] | ent[1] | + * | 16B | 16B | + * | lba/old/new/seq | lba/old/new/seq | + * +-----------------------------------+ + * | ent[2] | ent[3] | + * | 16B | 16B | + * | pad | pad | + * +-----------------+-----------------+ + * + * We detect during start-up which format is in use, and set + * arena->log_index[(0, 1)] with the detected format. + */ + struct log_entry { __le32 lba; __le32 old_map; __le32 new_map; __le32 seq; - __le64 padding[2]; +}; + +struct log_group { + struct log_entry ent[4]; }; struct btt_sb { @@ -126,6 +167,7 @@ struct aligned_lock { * @debugfs_dir: Debugfs dentry * @flags: Arena flags - may signify error states. * @err_lock: Mutex for synchronizing error clearing. + * @log_index: Indices of the valid log entries in a log_group * * arena_info is a per-arena handle. Once an arena is narrowed down for an * IO, this struct is passed around for the duration of the IO. @@ -158,6 +200,7 @@ struct arena_info { /* Arena flags */ u32 flags; struct mutex err_lock; + int log_index[2]; }; /** -- cgit v1.2.3-71-gd317 From f55688c45442bc863f40ad678c638785b26cdce6 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 18 Dec 2017 13:10:00 -0800 Subject: iw_cxgb4: Only validate the MSN for successful completions If the RECV CQE is in error, ignore the MSN check. This was causing recvs that were flushed into the sw cq to be completed with the wrong status (BAD_MSN instead of FLUSHED). Cc: stable@vger.kernel.org Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/cq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index b7bfc536e00f..7ed87622e461 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -571,10 +571,10 @@ static int poll_cq(struct t4_wq *wq, struct t4_cq *cq, struct t4_cqe *cqe, ret = -EAGAIN; goto skip_cqe; } - if (unlikely((CQE_WRID_MSN(hw_cqe) != (wq->rq.msn)))) { + if (unlikely(!CQE_STATUS(hw_cqe) && + CQE_WRID_MSN(hw_cqe) != wq->rq.msn)) { t4_set_wq_in_error(wq); - hw_cqe->header |= htonl(CQE_STATUS_V(T4_ERR_MSN)); - goto proc_cqe; + hw_cqe->header |= cpu_to_be32(CQE_STATUS_V(T4_ERR_MSN)); } goto proc_cqe; } -- cgit v1.2.3-71-gd317 From 96a236ed286776554fbd227c6d2876fd3b5dc65d Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 19 Dec 2017 10:29:25 -0800 Subject: iw_cxgb4: reflect the original WR opcode in drain cqes The flush/drain logic was not retaining the original wr opcode in its completion. This can cause problems if the application uses the completion opcode to make decisions. Use bit 10 of the CQE header word to indicate the CQE is a special drain completion, and save the original WR opcode in the cqe header opcode field. Fixes: 4fe7c2962e11 ("iw_cxgb4: refactor sq/rq drain logic") Cc: stable@vger.kernel.org Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/cq.c | 7 ++---- drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 -- drivers/infiniband/hw/cxgb4/qp.c | 46 +++++++++++++++++++++++++++++++--- drivers/infiniband/hw/cxgb4/t4.h | 6 +++++ 4 files changed, 50 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 7ed87622e461..6f2b26126c64 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -395,7 +395,7 @@ next_cqe: static int cqe_completes_wr(struct t4_cqe *cqe, struct t4_wq *wq) { - if (CQE_OPCODE(cqe) == C4IW_DRAIN_OPCODE) { + if (DRAIN_CQE(cqe)) { WARN_ONCE(1, "Unexpected DRAIN CQE qp id %u!\n", wq->sq.qid); return 0; } @@ -494,7 +494,7 @@ static int poll_cq(struct t4_wq *wq, struct t4_cq *cq, struct t4_cqe *cqe, /* * Special cqe for drain WR completions... */ - if (CQE_OPCODE(hw_cqe) == C4IW_DRAIN_OPCODE) { + if (DRAIN_CQE(hw_cqe)) { *cookie = CQE_DRAIN_COOKIE(hw_cqe); *cqe = *hw_cqe; goto skip_cqe; @@ -748,9 +748,6 @@ static int c4iw_poll_cq_one(struct c4iw_cq *chp, struct ib_wc *wc) c4iw_invalidate_mr(qhp->rhp, CQE_WRID_FR_STAG(&cqe)); break; - case C4IW_DRAIN_OPCODE: - wc->opcode = IB_WC_SEND; - break; default: pr_err("Unexpected opcode %d in the CQE received for QPID=0x%0x\n", CQE_OPCODE(&cqe), CQE_QPID(&cqe)); diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index 470f97a79ebb..65dd3726ca02 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -693,8 +693,6 @@ static inline int to_ib_qp_state(int c4iw_qp_state) return IB_QPS_ERR; } -#define C4IW_DRAIN_OPCODE FW_RI_SGE_EC_CR_RETURN - static inline u32 c4iw_ib_to_tpt_access(int a) { return (a & IB_ACCESS_REMOTE_WRITE ? FW_RI_MEM_ACCESS_REM_WRITE : 0) | diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 38bddd02a943..21495f917bcc 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -790,21 +790,57 @@ static int ring_kernel_rq_db(struct c4iw_qp *qhp, u16 inc) return 0; } -static void complete_sq_drain_wr(struct c4iw_qp *qhp, struct ib_send_wr *wr) +static int ib_to_fw_opcode(int ib_opcode) +{ + int opcode; + + switch (ib_opcode) { + case IB_WR_SEND_WITH_INV: + opcode = FW_RI_SEND_WITH_INV; + break; + case IB_WR_SEND: + opcode = FW_RI_SEND; + break; + case IB_WR_RDMA_WRITE: + opcode = FW_RI_RDMA_WRITE; + break; + case IB_WR_RDMA_READ: + case IB_WR_RDMA_READ_WITH_INV: + opcode = FW_RI_READ_REQ; + break; + case IB_WR_REG_MR: + opcode = FW_RI_FAST_REGISTER; + break; + case IB_WR_LOCAL_INV: + opcode = FW_RI_LOCAL_INV; + break; + default: + opcode = -EINVAL; + } + return opcode; +} + +static int complete_sq_drain_wr(struct c4iw_qp *qhp, struct ib_send_wr *wr) { struct t4_cqe cqe = {}; struct c4iw_cq *schp; unsigned long flag; struct t4_cq *cq; + int opcode; schp = to_c4iw_cq(qhp->ibqp.send_cq); cq = &schp->cq; + opcode = ib_to_fw_opcode(wr->opcode); + if (opcode < 0) + return opcode; + cqe.u.drain_cookie = wr->wr_id; cqe.header = cpu_to_be32(CQE_STATUS_V(T4_ERR_SWFLUSH) | - CQE_OPCODE_V(C4IW_DRAIN_OPCODE) | + CQE_OPCODE_V(opcode) | CQE_TYPE_V(1) | CQE_SWCQE_V(1) | + CQE_DRAIN_V(1) | CQE_QPID_V(qhp->wq.sq.qid)); spin_lock_irqsave(&schp->lock, flag); @@ -819,6 +855,7 @@ static void complete_sq_drain_wr(struct c4iw_qp *qhp, struct ib_send_wr *wr) schp->ibcq.cq_context); spin_unlock_irqrestore(&schp->comp_handler_lock, flag); } + return 0; } static void complete_rq_drain_wr(struct c4iw_qp *qhp, struct ib_recv_wr *wr) @@ -833,9 +870,10 @@ static void complete_rq_drain_wr(struct c4iw_qp *qhp, struct ib_recv_wr *wr) cqe.u.drain_cookie = wr->wr_id; cqe.header = cpu_to_be32(CQE_STATUS_V(T4_ERR_SWFLUSH) | - CQE_OPCODE_V(C4IW_DRAIN_OPCODE) | + CQE_OPCODE_V(FW_RI_SEND) | CQE_TYPE_V(0) | CQE_SWCQE_V(1) | + CQE_DRAIN_V(1) | CQE_QPID_V(qhp->wq.sq.qid)); spin_lock_irqsave(&rchp->lock, flag); @@ -875,7 +913,7 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, */ if (qhp->wq.flushed) { spin_unlock_irqrestore(&qhp->lock, flag); - complete_sq_drain_wr(qhp, wr); + err = complete_sq_drain_wr(qhp, wr); return err; } num_wrs = t4_sq_avail(&qhp->wq); diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h index e9ea94268d51..79e8ee12c391 100644 --- a/drivers/infiniband/hw/cxgb4/t4.h +++ b/drivers/infiniband/hw/cxgb4/t4.h @@ -197,6 +197,11 @@ struct t4_cqe { #define CQE_SWCQE_G(x) ((((x) >> CQE_SWCQE_S)) & CQE_SWCQE_M) #define CQE_SWCQE_V(x) ((x)<> CQE_DRAIN_S)) & CQE_DRAIN_M) +#define CQE_DRAIN_V(x) ((x)<> CQE_STATUS_S)) & CQE_STATUS_M) @@ -213,6 +218,7 @@ struct t4_cqe { #define CQE_OPCODE_V(x) ((x)<header))) +#define DRAIN_CQE(x) (CQE_DRAIN_G(be32_to_cpu((x)->header))) #define CQE_QPID(x) (CQE_QPID_G(be32_to_cpu((x)->header))) #define CQE_TYPE(x) (CQE_TYPE_G(be32_to_cpu((x)->header))) #define SQ_TYPE(x) (CQE_TYPE((x))) -- cgit v1.2.3-71-gd317 From d14587334580bc94d3ee11e8320e0c157f91ae8f Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 19 Dec 2017 14:02:10 -0800 Subject: iw_cxgb4: when flushing, complete all wrs in a chain If a wr chain was posted and needed to be flushed, only the first wr in the chain was completed with FLUSHED status. The rest were never completed. This caused isert to hang on shutdown due to the missing completions which left iscsi IO commands referenced, stalling the shutdown. Fixes: 4fe7c2962e11 ("iw_cxgb4: refactor sq/rq drain logic") Cc: stable@vger.kernel.org Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/qp.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 21495f917bcc..d5c92fc520d6 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -858,6 +858,22 @@ static int complete_sq_drain_wr(struct c4iw_qp *qhp, struct ib_send_wr *wr) return 0; } +static int complete_sq_drain_wrs(struct c4iw_qp *qhp, struct ib_send_wr *wr, + struct ib_send_wr **bad_wr) +{ + int ret = 0; + + while (wr) { + ret = complete_sq_drain_wr(qhp, wr); + if (ret) { + *bad_wr = wr; + break; + } + wr = wr->next; + } + return ret; +} + static void complete_rq_drain_wr(struct c4iw_qp *qhp, struct ib_recv_wr *wr) { struct t4_cqe cqe = {}; @@ -890,6 +906,14 @@ static void complete_rq_drain_wr(struct c4iw_qp *qhp, struct ib_recv_wr *wr) } } +static void complete_rq_drain_wrs(struct c4iw_qp *qhp, struct ib_recv_wr *wr) +{ + while (wr) { + complete_rq_drain_wr(qhp, wr); + wr = wr->next; + } +} + int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, struct ib_send_wr **bad_wr) { @@ -913,7 +937,7 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, */ if (qhp->wq.flushed) { spin_unlock_irqrestore(&qhp->lock, flag); - err = complete_sq_drain_wr(qhp, wr); + err = complete_sq_drain_wrs(qhp, wr, bad_wr); return err; } num_wrs = t4_sq_avail(&qhp->wq); @@ -1061,7 +1085,7 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, */ if (qhp->wq.flushed) { spin_unlock_irqrestore(&qhp->lock, flag); - complete_rq_drain_wr(qhp, wr); + complete_rq_drain_wrs(qhp, wr); return err; } num_wrs = t4_rq_avail(&qhp->wq); -- cgit v1.2.3-71-gd317 From 17748056ce123ee37fb7382bc698fc721e3c4a09 Mon Sep 17 00:00:00 2001 From: Bryan Tan Date: Wed, 20 Dec 2017 09:49:03 -0800 Subject: RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path The QP cleanup did not previously call ib_umem_release, resulting in a user-triggerable kernel resource leak. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Reviewed-by: Adit Ranadive Reviewed-by: Aditya Sarwade Reviewed-by: Jorgen Hansen Signed-off-by: Bryan Tan Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c index 10420a18d02f..dceebc623d96 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c @@ -431,6 +431,13 @@ static void pvrdma_free_qp(struct pvrdma_qp *qp) atomic_dec(&qp->refcnt); wait_event(qp->wait, !atomic_read(&qp->refcnt)); + if (!qp->is_kernel) { + if (qp->rumem) + ib_umem_release(qp->rumem); + if (qp->sumem) + ib_umem_release(qp->sumem); + } + pvrdma_page_dir_cleanup(dev, &qp->pdir); kfree(qp); -- cgit v1.2.3-71-gd317 From 30a366a9dabd05a0d218288b7d732649886b6a53 Mon Sep 17 00:00:00 2001 From: Bryan Tan Date: Wed, 20 Dec 2017 09:50:01 -0800 Subject: RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning refcount_dec generates a warning when the operation causes the refcount to hit zero. Avoid this by using refcount_dec_and_test. Fixes: 8b10ba783c9d ("RDMA/vmw_pvrdma: Add shared receive queue support") Reviewed-by: Adit Ranadive Reviewed-by: Aditya Sarwade Reviewed-by: Jorgen Hansen Signed-off-by: Bryan Tan Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c index 826ccb864596..a2b1a3c115f2 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c @@ -236,8 +236,8 @@ static void pvrdma_free_srq(struct pvrdma_dev *dev, struct pvrdma_srq *srq) dev->srq_tbl[srq->srq_handle] = NULL; spin_unlock_irqrestore(&dev->srq_tbl_lock, flags); - refcount_dec(&srq->refcnt); - wait_event(srq->wait, !refcount_read(&srq->refcnt)); + if (!refcount_dec_and_test(&srq->refcnt)) + wait_event(srq->wait, !refcount_read(&srq->refcnt)); /* There is no support for kernel clients, so this is safe. */ ib_umem_release(srq->umem); -- cgit v1.2.3-71-gd317 From e3524b269e451cff68b19f32b15448933a53a4f4 Mon Sep 17 00:00:00 2001 From: Bryan Tan Date: Wed, 20 Dec 2017 09:51:40 -0800 Subject: RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy The use of wait queues in vmw_pvrdma for handling concurrent access to a resource leaves a race condition which can cause a use after free bug. Fix this by using the pattern from other drivers, complete() protected by dec_and_test to ensure complete() is called only once. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Signed-off-by: Bryan Tan Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/vmw_pvrdma/pvrdma.h | 6 +++--- drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c | 7 ++++--- drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c | 17 +++++++---------- drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c | 7 ++++--- drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c | 7 ++++--- 5 files changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h b/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h index 63bc2efc34eb..4f7bd3b6a315 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma.h @@ -94,7 +94,7 @@ struct pvrdma_cq { u32 cq_handle; bool is_kernel; atomic_t refcnt; - wait_queue_head_t wait; + struct completion free; }; struct pvrdma_id_table { @@ -175,7 +175,7 @@ struct pvrdma_srq { u32 srq_handle; int npages; refcount_t refcnt; - wait_queue_head_t wait; + struct completion free; }; struct pvrdma_qp { @@ -197,7 +197,7 @@ struct pvrdma_qp { bool is_kernel; struct mutex mutex; /* QP state mutex. */ atomic_t refcnt; - wait_queue_head_t wait; + struct completion free; }; struct pvrdma_dev { diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c index 3562c0c30492..e529622cefad 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_cq.c @@ -179,7 +179,7 @@ struct ib_cq *pvrdma_create_cq(struct ib_device *ibdev, pvrdma_page_dir_insert_umem(&cq->pdir, cq->umem, 0); atomic_set(&cq->refcnt, 1); - init_waitqueue_head(&cq->wait); + init_completion(&cq->free); spin_lock_init(&cq->cq_lock); memset(cmd, 0, sizeof(*cmd)); @@ -230,8 +230,9 @@ err_cq: static void pvrdma_free_cq(struct pvrdma_dev *dev, struct pvrdma_cq *cq) { - atomic_dec(&cq->refcnt); - wait_event(cq->wait, !atomic_read(&cq->refcnt)); + if (atomic_dec_and_test(&cq->refcnt)) + complete(&cq->free); + wait_for_completion(&cq->free); if (!cq->is_kernel) ib_umem_release(cq->umem); diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c index 1f4e18717a00..e92681878c93 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c @@ -346,9 +346,8 @@ static void pvrdma_qp_event(struct pvrdma_dev *dev, u32 qpn, int type) ibqp->event_handler(&e, ibqp->qp_context); } if (qp) { - atomic_dec(&qp->refcnt); - if (atomic_read(&qp->refcnt) == 0) - wake_up(&qp->wait); + if (atomic_dec_and_test(&qp->refcnt)) + complete(&qp->free); } } @@ -373,9 +372,8 @@ static void pvrdma_cq_event(struct pvrdma_dev *dev, u32 cqn, int type) ibcq->event_handler(&e, ibcq->cq_context); } if (cq) { - atomic_dec(&cq->refcnt); - if (atomic_read(&cq->refcnt) == 0) - wake_up(&cq->wait); + if (atomic_dec_and_test(&cq->refcnt)) + complete(&cq->free); } } @@ -404,7 +402,7 @@ static void pvrdma_srq_event(struct pvrdma_dev *dev, u32 srqn, int type) } if (srq) { if (refcount_dec_and_test(&srq->refcnt)) - wake_up(&srq->wait); + complete(&srq->free); } } @@ -539,9 +537,8 @@ static irqreturn_t pvrdma_intrx_handler(int irq, void *dev_id) if (cq && cq->ibcq.comp_handler) cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context); if (cq) { - atomic_dec(&cq->refcnt); - if (atomic_read(&cq->refcnt)) - wake_up(&cq->wait); + if (atomic_dec_and_test(&cq->refcnt)) + complete(&cq->free); } pvrdma_idx_ring_inc(&ring->cons_head, ring_slots); } diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c index dceebc623d96..4059308e1454 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_qp.c @@ -246,7 +246,7 @@ struct ib_qp *pvrdma_create_qp(struct ib_pd *pd, spin_lock_init(&qp->rq.lock); mutex_init(&qp->mutex); atomic_set(&qp->refcnt, 1); - init_waitqueue_head(&qp->wait); + init_completion(&qp->free); qp->state = IB_QPS_RESET; @@ -428,8 +428,9 @@ static void pvrdma_free_qp(struct pvrdma_qp *qp) pvrdma_unlock_cqs(scq, rcq, &scq_flags, &rcq_flags); - atomic_dec(&qp->refcnt); - wait_event(qp->wait, !atomic_read(&qp->refcnt)); + if (atomic_dec_and_test(&qp->refcnt)) + complete(&qp->free); + wait_for_completion(&qp->free); if (!qp->is_kernel) { if (qp->rumem) diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c index a2b1a3c115f2..5acebb1ef631 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_srq.c @@ -149,7 +149,7 @@ struct ib_srq *pvrdma_create_srq(struct ib_pd *pd, spin_lock_init(&srq->lock); refcount_set(&srq->refcnt, 1); - init_waitqueue_head(&srq->wait); + init_completion(&srq->free); dev_dbg(&dev->pdev->dev, "create shared receive queue from user space\n"); @@ -236,8 +236,9 @@ static void pvrdma_free_srq(struct pvrdma_dev *dev, struct pvrdma_srq *srq) dev->srq_tbl[srq->srq_handle] = NULL; spin_unlock_irqrestore(&dev->srq_tbl_lock, flags); - if (!refcount_dec_and_test(&srq->refcnt)) - wait_event(srq->wait, !refcount_read(&srq->refcnt)); + if (refcount_dec_and_test(&srq->refcnt)) + complete(&srq->free); + wait_for_completion(&srq->free); /* There is no support for kernel clients, so this is safe. */ ib_umem_release(srq->umem); -- cgit v1.2.3-71-gd317 From 71a0ff65a21bf3e2c4fde208c4a635ed2bbb4e81 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Thu, 21 Dec 2017 17:38:26 +0200 Subject: IB/mlx5: Fix congestion counters in LAG mode Congestion counters are counted and queried per physical function. When working in LAG mode, CNP packets can be sent or received on both of the functions, thus congestion counters should be aggregated from the two physical functions. Fixes: e1f24a79f424 ("IB/mlx5: Support congestion related counters") Signed-off-by: Majd Dibbiny Reviewed-by: Aviv Heller Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/cmd.c | 11 ------ drivers/infiniband/hw/mlx5/cmd.h | 2 - drivers/infiniband/hw/mlx5/main.c | 35 +++-------------- drivers/net/ethernet/mellanox/mlx5/core/lag.c | 56 +++++++++++++++++++++++++++ include/linux/mlx5/driver.h | 4 ++ 5 files changed, 66 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/cmd.c b/drivers/infiniband/hw/mlx5/cmd.c index 470995fa38d2..6f6712f87a73 100644 --- a/drivers/infiniband/hw/mlx5/cmd.c +++ b/drivers/infiniband/hw/mlx5/cmd.c @@ -47,17 +47,6 @@ int mlx5_cmd_null_mkey(struct mlx5_core_dev *dev, u32 *null_mkey) return err; } -int mlx5_cmd_query_cong_counter(struct mlx5_core_dev *dev, - bool reset, void *out, int out_size) -{ - u32 in[MLX5_ST_SZ_DW(query_cong_statistics_in)] = { }; - - MLX5_SET(query_cong_statistics_in, in, opcode, - MLX5_CMD_OP_QUERY_CONG_STATISTICS); - MLX5_SET(query_cong_statistics_in, in, clear, reset); - return mlx5_cmd_exec(dev, in, sizeof(in), out, out_size); -} - int mlx5_cmd_query_cong_params(struct mlx5_core_dev *dev, int cong_point, void *out, int out_size) { diff --git a/drivers/infiniband/hw/mlx5/cmd.h b/drivers/infiniband/hw/mlx5/cmd.h index af4c24596274..78ffded7cc2c 100644 --- a/drivers/infiniband/hw/mlx5/cmd.h +++ b/drivers/infiniband/hw/mlx5/cmd.h @@ -37,8 +37,6 @@ #include int mlx5_cmd_null_mkey(struct mlx5_core_dev *dev, u32 *null_mkey); -int mlx5_cmd_query_cong_counter(struct mlx5_core_dev *dev, - bool reset, void *out, int out_size); int mlx5_cmd_query_cong_params(struct mlx5_core_dev *dev, int cong_point, void *out, int out_size); int mlx5_cmd_modify_cong_params(struct mlx5_core_dev *mdev, diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 543d0a4c8bf3..b4ef4d9b6ce5 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3737,34 +3737,6 @@ free: return ret; } -static int mlx5_ib_query_cong_counters(struct mlx5_ib_dev *dev, - struct mlx5_ib_port *port, - struct rdma_hw_stats *stats) -{ - int outlen = MLX5_ST_SZ_BYTES(query_cong_statistics_out); - void *out; - int ret, i; - int offset = port->cnts.num_q_counters; - - out = kvzalloc(outlen, GFP_KERNEL); - if (!out) - return -ENOMEM; - - ret = mlx5_cmd_query_cong_counter(dev->mdev, false, out, outlen); - if (ret) - goto free; - - for (i = 0; i < port->cnts.num_cong_counters; i++) { - stats->value[i + offset] = - be64_to_cpup((__be64 *)(out + - port->cnts.offsets[i + offset])); - } - -free: - kvfree(out); - return ret; -} - static int mlx5_ib_get_hw_stats(struct ib_device *ibdev, struct rdma_hw_stats *stats, u8 port_num, int index) @@ -3782,7 +3754,12 @@ static int mlx5_ib_get_hw_stats(struct ib_device *ibdev, num_counters = port->cnts.num_q_counters; if (MLX5_CAP_GEN(dev->mdev, cc_query_allowed)) { - ret = mlx5_ib_query_cong_counters(dev, port, stats); + ret = mlx5_lag_query_cong_counters(dev->mdev, + stats->value + + port->cnts.num_q_counters, + port->cnts.num_cong_counters, + port->cnts.offsets + + port->cnts.num_q_counters); if (ret) return ret; num_counters += port->cnts.num_cong_counters; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c index f26f97fe4666..582b2f18010a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c @@ -137,6 +137,17 @@ int mlx5_cmd_destroy_vport_lag(struct mlx5_core_dev *dev) } EXPORT_SYMBOL(mlx5_cmd_destroy_vport_lag); +static int mlx5_cmd_query_cong_counter(struct mlx5_core_dev *dev, + bool reset, void *out, int out_size) +{ + u32 in[MLX5_ST_SZ_DW(query_cong_statistics_in)] = { }; + + MLX5_SET(query_cong_statistics_in, in, opcode, + MLX5_CMD_OP_QUERY_CONG_STATISTICS); + MLX5_SET(query_cong_statistics_in, in, clear, reset); + return mlx5_cmd_exec(dev, in, sizeof(in), out, out_size); +} + static struct mlx5_lag *mlx5_lag_dev_get(struct mlx5_core_dev *dev) { return dev->priv.lag; @@ -633,3 +644,48 @@ bool mlx5_lag_intf_add(struct mlx5_interface *intf, struct mlx5_priv *priv) /* If bonded, we do not add an IB device for PF1. */ return false; } + +int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev, + u64 *values, + int num_counters, + size_t *offsets) +{ + int outlen = MLX5_ST_SZ_BYTES(query_cong_statistics_out); + struct mlx5_core_dev *mdev[MLX5_MAX_PORTS]; + struct mlx5_lag *ldev; + int num_ports; + int ret, i, j; + void *out; + + out = kvzalloc(outlen, GFP_KERNEL); + if (!out) + return -ENOMEM; + + memset(values, 0, sizeof(*values) * num_counters); + + mutex_lock(&lag_mutex); + ldev = mlx5_lag_dev_get(dev); + if (ldev && mlx5_lag_is_bonded(ldev)) { + num_ports = MLX5_MAX_PORTS; + mdev[0] = ldev->pf[0].dev; + mdev[1] = ldev->pf[1].dev; + } else { + num_ports = 1; + mdev[0] = dev; + } + + for (i = 0; i < num_ports; ++i) { + ret = mlx5_cmd_query_cong_counter(mdev[i], false, out, outlen); + if (ret) + goto unlock; + + for (j = 0; j < num_counters; ++j) + values[j] += be64_to_cpup((__be64 *)(out + offsets[j])); + } + +unlock: + mutex_unlock(&lag_mutex); + kvfree(out); + return ret; +} +EXPORT_SYMBOL(mlx5_lag_query_cong_counters); diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index a886b51511ab..8846919356ca 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1164,6 +1164,10 @@ int mlx5_cmd_create_vport_lag(struct mlx5_core_dev *dev); int mlx5_cmd_destroy_vport_lag(struct mlx5_core_dev *dev); bool mlx5_lag_is_active(struct mlx5_core_dev *dev); struct net_device *mlx5_lag_get_roce_netdev(struct mlx5_core_dev *dev); +int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev, + u64 *values, + int num_counters, + size_t *offsets); struct mlx5_uars_page *mlx5_get_uars_page(struct mlx5_core_dev *mdev); void mlx5_put_uars_page(struct mlx5_core_dev *mdev, struct mlx5_uars_page *up); -- cgit v1.2.3-71-gd317 From 1f80bd6a6cc8358b81194e1f5fc16449947396ec Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Thu, 21 Dec 2017 17:38:27 +0200 Subject: IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B), contradicts other flows such as ipoib_open possibly causing a deadlock. To prevent this deadlock heavy flush is called with RTNL locked and only then tries to acquire vlan_rwsem. This deadlock is possible only when there are child interfaces. [ 140.941758] ====================================================== [ 140.946276] WARNING: possible circular locking dependency detected [ 140.950950] 4.15.0-rc1+ #9 Tainted: G O [ 140.954797] ------------------------------------------------------ [ 140.959424] kworker/u32:1/146 is trying to acquire lock: [ 140.963450] (rtnl_mutex){+.+.}, at: [] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 140.970006] but task is already holding lock: [ 140.975141] (&priv->vlan_rwsem){++++}, at: [] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib] [ 140.982105] which lock already depends on the new lock. [ 140.990023] the existing dependency chain (in reverse order) is: [ 140.998650] -> #1 (&priv->vlan_rwsem){++++}: [ 141.005276] down_read+0x4d/0xb0 [ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib] [ 141.014400] __dev_open+0xcb/0x140 [ 141.017919] __dev_change_flags+0x1a4/0x1e0 [ 141.022133] dev_change_flags+0x23/0x60 [ 141.025695] devinet_ioctl+0x704/0x7d0 [ 141.029156] sock_do_ioctl+0x20/0x50 [ 141.032526] sock_ioctl+0x221/0x300 [ 141.036079] do_vfs_ioctl+0xa6/0x6d0 [ 141.039656] SyS_ioctl+0x74/0x80 [ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 141.046891] -> #0 (rtnl_mutex){+.+.}: [ 141.051701] lock_acquire+0xd4/0x220 [ 141.055212] __mutex_lock+0x88/0x970 [ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib] [ 141.067648] process_one_work+0x1f5/0x610 [ 141.071429] worker_thread+0x4a/0x3f0 [ 141.074890] kthread+0x141/0x180 [ 141.078085] ret_from_fork+0x24/0x30 [ 141.081559] other info that might help us debug this: [ 141.088967] Possible unsafe locking scenario: [ 141.094280] CPU0 CPU1 [ 141.097953] ---- ---- [ 141.101640] lock(&priv->vlan_rwsem); [ 141.104771] lock(rtnl_mutex); [ 141.109207] lock(&priv->vlan_rwsem); [ 141.114032] lock(rtnl_mutex); [ 141.116800] *** DEADLOCK *** Fixes: b4b678b06f6e ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop") Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 3b96cdaf9a83..e6151a29c412 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -1236,13 +1236,10 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, ipoib_ib_dev_down(dev); if (level == IPOIB_FLUSH_HEAVY) { - rtnl_lock(); if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) ipoib_ib_dev_stop(dev); - result = ipoib_ib_dev_open(dev); - rtnl_unlock(); - if (result) + if (ipoib_ib_dev_open(dev)) return; if (netif_queue_stopped(dev)) @@ -1282,7 +1279,9 @@ void ipoib_ib_dev_flush_heavy(struct work_struct *work) struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, flush_heavy); + rtnl_lock(); __ipoib_ib_dev_flush(priv, IPOIB_FLUSH_HEAVY, 0); + rtnl_unlock(); } void ipoib_ib_dev_cleanup(struct net_device *dev) -- cgit v1.2.3-71-gd317 From e7cdf5c82f1773c3386b93bbcf13b9bfff29fa31 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 19 Dec 2017 12:07:00 +0000 Subject: drm/syncobj: Stop reusing the same struct file for all syncobj -> fd The vk cts test: dEQP-VK.api.external.semaphore.opaque_fd.export_multiple_times_temporary triggers a lot of VFS: Close: file count is 0 Dave pointed out that clearing the syncobj->file from drm_syncobj_file_release() was sufficient to silence the test, but that opens a can of worm since we assumed that the syncobj->file was never unset. Stop trying to reuse the same struct file for every fd pointing to the drm_syncobj, and allocate one file for each fd instead. v2: Fixup return handling of drm_syncobj_fd_to_handle v2.1: [airlied: fix possible syncobj ref race] Reported-by: Dave Airlie Signed-off-by: Chris Wilson Tested-by: Dave Airlie Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_syncobj.c | 77 ++++++++++++++++--------------------------- 1 file changed, 29 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c index f776fc1cc543..cb4d09c70fd4 100644 --- a/drivers/gpu/drm/drm_syncobj.c +++ b/drivers/gpu/drm/drm_syncobj.c @@ -369,40 +369,26 @@ static const struct file_operations drm_syncobj_file_fops = { .release = drm_syncobj_file_release, }; -static int drm_syncobj_alloc_file(struct drm_syncobj *syncobj) -{ - struct file *file = anon_inode_getfile("syncobj_file", - &drm_syncobj_file_fops, - syncobj, 0); - if (IS_ERR(file)) - return PTR_ERR(file); - - drm_syncobj_get(syncobj); - if (cmpxchg(&syncobj->file, NULL, file)) { - /* lost the race */ - fput(file); - } - - return 0; -} - int drm_syncobj_get_fd(struct drm_syncobj *syncobj, int *p_fd) { - int ret; + struct file *file; int fd; fd = get_unused_fd_flags(O_CLOEXEC); if (fd < 0) return fd; - if (!syncobj->file) { - ret = drm_syncobj_alloc_file(syncobj); - if (ret) { - put_unused_fd(fd); - return ret; - } + file = anon_inode_getfile("syncobj_file", + &drm_syncobj_file_fops, + syncobj, 0); + if (IS_ERR(file)) { + put_unused_fd(fd); + return PTR_ERR(file); } - fd_install(fd, syncobj->file); + + drm_syncobj_get(syncobj); + fd_install(fd, file); + *p_fd = fd; return 0; } @@ -422,31 +408,24 @@ static int drm_syncobj_handle_to_fd(struct drm_file *file_private, return ret; } -static struct drm_syncobj *drm_syncobj_fdget(int fd) -{ - struct file *file = fget(fd); - - if (!file) - return NULL; - if (file->f_op != &drm_syncobj_file_fops) - goto err; - - return file->private_data; -err: - fput(file); - return NULL; -}; - static int drm_syncobj_fd_to_handle(struct drm_file *file_private, int fd, u32 *handle) { - struct drm_syncobj *syncobj = drm_syncobj_fdget(fd); + struct drm_syncobj *syncobj; + struct file *file; int ret; - if (!syncobj) + file = fget(fd); + if (!file) return -EINVAL; + if (file->f_op != &drm_syncobj_file_fops) { + fput(file); + return -EINVAL; + } + /* take a reference to put in the idr */ + syncobj = file->private_data; drm_syncobj_get(syncobj); idr_preload(GFP_KERNEL); @@ -455,12 +434,14 @@ static int drm_syncobj_fd_to_handle(struct drm_file *file_private, spin_unlock(&file_private->syncobj_table_lock); idr_preload_end(); - if (ret < 0) { - fput(syncobj->file); - return ret; - } - *handle = ret; - return 0; + if (ret > 0) { + *handle = ret; + ret = 0; + } else + drm_syncobj_put(syncobj); + + fput(file); + return ret; } static int drm_syncobj_import_sync_file_fence(struct drm_file *file_private, -- cgit v1.2.3-71-gd317 From 8bb65fc06c08f027980a917648e1cf6e4d51c5ad Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 6 Dec 2017 11:37:45 -0600 Subject: gpio: gpio-reg: fix build Revert changes introduced by commit f0fbe7bce733 ("gpio: Move irqdomain into struct gpio_irq_chip") as they are not aplicable to this driver. Reported-by: Russell King - ARM Linux Fixes: f0fbe7bce733 ("gpio: Move irqdomain into struct gpio_irq_chip") Signed-off-by: Grygorii Strashko Signed-off-by: Linus Walleij --- drivers/gpio/gpio-reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-reg.c b/drivers/gpio/gpio-reg.c index 23e771dba4c1..e85903eddc68 100644 --- a/drivers/gpio/gpio-reg.c +++ b/drivers/gpio/gpio-reg.c @@ -103,8 +103,8 @@ static int gpio_reg_to_irq(struct gpio_chip *gc, unsigned offset) struct gpio_reg *r = to_gpio_reg(gc); int irq = r->irqs[offset]; - if (irq >= 0 && r->irq.domain) - irq = irq_find_mapping(r->irq.domain, irq); + if (irq >= 0 && r->irqdomain) + irq = irq_find_mapping(r->irqdomain, irq); return irq; } -- cgit v1.2.3-71-gd317 From 822703354774ec935169cbbc8d503236bcb54fda Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Fri, 15 Dec 2017 15:02:33 +0100 Subject: gpio: fix "gpio-line-names" property retrieval Following commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors"), "gpio-line-names" DT property is not retrieved anymore when chip->parent is not set by the driver. This is due to OF based property reads having been replaced by device based property reads. This patch fixes that by making use of fwnode_property_read_string_array() instead of device_property_read_string_array() and handing over either of_fwnode_handle(chip->of_node) or dev_fwnode(chip->parent) to that function. Fixes: 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-acpi.c | 2 +- drivers/gpio/gpiolib-devprop.c | 17 +++++++---------- drivers/gpio/gpiolib-of.c | 3 ++- drivers/gpio/gpiolib.h | 3 ++- 4 files changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index eb4528c87c0b..d6f3d9ee1350 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -1074,7 +1074,7 @@ void acpi_gpiochip_add(struct gpio_chip *chip) } if (!chip->names) - devprop_gpiochip_set_names(chip); + devprop_gpiochip_set_names(chip, dev_fwnode(chip->parent)); acpi_gpiochip_request_regions(acpi_gpio); acpi_gpiochip_scan_gpios(acpi_gpio); diff --git a/drivers/gpio/gpiolib-devprop.c b/drivers/gpio/gpiolib-devprop.c index 27f383bda7d9..f748aa3e77f7 100644 --- a/drivers/gpio/gpiolib-devprop.c +++ b/drivers/gpio/gpiolib-devprop.c @@ -19,30 +19,27 @@ /** * devprop_gpiochip_set_names - Set GPIO line names using device properties * @chip: GPIO chip whose lines should be named, if possible + * @fwnode: Property Node containing the gpio-line-names property * * Looks for device property "gpio-line-names" and if it exists assigns * GPIO line names for the chip. The memory allocated for the assigned * names belong to the underlying firmware node and should not be released * by the caller. */ -void devprop_gpiochip_set_names(struct gpio_chip *chip) +void devprop_gpiochip_set_names(struct gpio_chip *chip, + const struct fwnode_handle *fwnode) { struct gpio_device *gdev = chip->gpiodev; const char **names; int ret, i; - if (!chip->parent) { - dev_warn(&gdev->dev, "GPIO chip parent is NULL\n"); - return; - } - - ret = device_property_read_string_array(chip->parent, "gpio-line-names", + ret = fwnode_property_read_string_array(fwnode, "gpio-line-names", NULL, 0); if (ret < 0) return; if (ret != gdev->ngpio) { - dev_warn(chip->parent, + dev_warn(&gdev->dev, "names %d do not match number of GPIOs %d\n", ret, gdev->ngpio); return; @@ -52,10 +49,10 @@ void devprop_gpiochip_set_names(struct gpio_chip *chip) if (!names) return; - ret = device_property_read_string_array(chip->parent, "gpio-line-names", + ret = fwnode_property_read_string_array(fwnode, "gpio-line-names", names, gdev->ngpio); if (ret < 0) { - dev_warn(chip->parent, "failed to read GPIO line names\n"); + dev_warn(&gdev->dev, "failed to read GPIO line names\n"); kfree(names); return; } diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index e0d59e61b52f..72a0695d2ac3 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -493,7 +493,8 @@ int of_gpiochip_add(struct gpio_chip *chip) /* If the chip defines names itself, these take precedence */ if (!chip->names) - devprop_gpiochip_set_names(chip); + devprop_gpiochip_set_names(chip, + of_fwnode_handle(chip->of_node)); of_node_get(chip->of_node); diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h index af48322839c3..6c44d1652139 100644 --- a/drivers/gpio/gpiolib.h +++ b/drivers/gpio/gpiolib.h @@ -228,7 +228,8 @@ static inline int gpio_chip_hwgpio(const struct gpio_desc *desc) return desc - &desc->gdev->descs[0]; } -void devprop_gpiochip_set_names(struct gpio_chip *chip); +void devprop_gpiochip_set_names(struct gpio_chip *chip, + const struct fwnode_handle *fwnode); /* With descriptor prefix */ -- cgit v1.2.3-71-gd317 From 4c009af473b2026caaa26107e34d7cc68dad7756 Mon Sep 17 00:00:00 2001 From: "Michael J. Ruhl" Date: Fri, 22 Dec 2017 08:47:20 -0800 Subject: IB/hfi: Only read capability registers if the capability exists During driver init, various registers are saved to allow restoration after an FLR or gen3 bump. Some of these registers are not available in some circumstances (i.e. Virtual machines). This bug makes the driver unusable when the PCI device is passed into a VM, it fails during probe. Delete unnecessary register read/write, and only access register if the capability exists. Cc: # 4.14.x Fixes: a618b7e40af2 ("IB/hfi1: Move saving PCI values to a separate function") Reviewed-by: Mike Marciniszyn Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/hfi.h | 1 - drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++++++------------------ 2 files changed, 12 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 4a9b4d7efe63..8ce9118d4a7f 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1131,7 +1131,6 @@ struct hfi1_devdata { u16 pcie_lnkctl; u16 pcie_devctl2; u32 pci_msix0; - u32 pci_lnkctl3; u32 pci_tph2; /* diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c index 09e50fd2a08f..8c7e7a60b715 100644 --- a/drivers/infiniband/hw/hfi1/pcie.c +++ b/drivers/infiniband/hw/hfi1/pcie.c @@ -411,15 +411,12 @@ int restore_pci_variables(struct hfi1_devdata *dd) if (ret) goto error; - ret = pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, - dd->pci_lnkctl3); - if (ret) - goto error; - - ret = pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, dd->pci_tph2); - if (ret) - goto error; - + if (pci_find_ext_capability(dd->pcidev, PCI_EXT_CAP_ID_TPH)) { + ret = pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, + dd->pci_tph2); + if (ret) + goto error; + } return 0; error: @@ -469,15 +466,12 @@ int save_pci_variables(struct hfi1_devdata *dd) if (ret) goto error; - ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, - &dd->pci_lnkctl3); - if (ret) - goto error; - - ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2); - if (ret) - goto error; - + if (pci_find_ext_capability(dd->pcidev, PCI_EXT_CAP_ID_TPH)) { + ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, + &dd->pci_tph2); + if (ret) + goto error; + } return 0; error: -- cgit v1.2.3-71-gd317 From b26a2319be3dd26edb3013504992a037a5902520 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sat, 23 Dec 2017 08:54:28 +1000 Subject: drm/nouveau: fix race when adding delayed work items kernel.org bz#198221. Reported-by: Petr Vandrovec Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 8d4a5be3b913..56fe261b6268 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -152,9 +152,9 @@ nouveau_cli_work_queue(struct nouveau_cli *cli, struct dma_fence *fence, work->cli = cli; mutex_lock(&cli->lock); list_add_tail(&work->head, &cli->worker); - mutex_unlock(&cli->lock); if (dma_fence_add_callback(fence, &work->cb, nouveau_cli_work_fence)) nouveau_cli_work_fence(fence, &work->cb); + mutex_unlock(&cli->lock); } static void -- cgit v1.2.3-71-gd317 From 8a42d3fc9dfccbf601c5f58f46dc3cdbc1a4b923 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Fri, 15 Dec 2017 13:42:04 +0000 Subject: nvmem: meson-mx-efuse: fix reading from an offset other than 0 meson_mx_efuse_read calculates the address internal to the eFuse based on the offset and the word size. This works fine with any given offset. However, the offset is also included when writing to the output buffer. This means that reading 4 bytes at offset 500 tries to write beyond the array allocated by the nvmem core as it wants to write the 4 bytes to "buffer address + offset (500)". This issue did not show up in the previous tests since no driver uses any value from the eFuse yet and reading the eFuse via sysfs simply reads the whole eFuse, starting at offset 0. Fix this by only including the offset in the internal address calculation. Fixes: 8caef1fa9176 ("nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs") Signed-off-by: Martin Blumenstingl Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/meson-mx-efuse.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c index a346b4923550..41d3a3c1104e 100644 --- a/drivers/nvmem/meson-mx-efuse.c +++ b/drivers/nvmem/meson-mx-efuse.c @@ -156,8 +156,8 @@ static int meson_mx_efuse_read(void *context, unsigned int offset, MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE); - for (i = offset; i < offset + bytes; i += efuse->config.word_size) { - addr = i / efuse->config.word_size; + for (i = 0; i < bytes; i += efuse->config.word_size) { + addr = (offset + i) / efuse->config.word_size; err = meson_mx_efuse_read_addr(efuse, addr, &tmp); if (err) -- cgit v1.2.3-71-gd317 From 182088aa3c6c7f7c20a2c1dcc9ded4a3fc631f38 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 20 Dec 2017 23:21:28 +0000 Subject: phylink: ensure the PHY interface mode is appropriately set When setting the ethtool settings, ensure that the validated PHY interface mode is propagated to the current link settings, so that 2500BaseX can be selected. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 5dc9668dde34..8d06a083ac4c 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -951,6 +951,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, mutex_lock(&pl->state_mutex); /* Configure the MAC to match the new settings */ linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising); + pl->link_config.interface = config.interface; pl->link_config.speed = our_kset.base.speed; pl->link_config.duplex = our_kset.base.duplex; pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE; -- cgit v1.2.3-71-gd317 From 74ee0e8c1bf9925c59cc8f1c65c29adf6e4cf603 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 20 Dec 2017 23:21:34 +0000 Subject: phylink: ensure AN is enabled Ensure that we mark AN as enabled at boot time, rather than leaving it disabled. This is noticable if your SFP module is fiber, and it supports faster speeds than 1G with 2.5G support in place. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 8d06a083ac4c..827f3f92560e 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -526,6 +526,7 @@ struct phylink *phylink_create(struct net_device *ndev, struct device_node *np, pl->link_config.pause = MLO_PAUSE_AN; pl->link_config.speed = SPEED_UNKNOWN; pl->link_config.duplex = DUPLEX_UNKNOWN; + pl->link_config.an_enabled = true; pl->ops = ops; __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); -- cgit v1.2.3-71-gd317 From c1a8d0a3accf64a014d605e6806ce05d1c17adf1 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 20 Dec 2017 18:45:10 -0600 Subject: net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index ab4614113403..422ff6333c52 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -624,6 +624,7 @@ static int ksz9031_read_status(struct phy_device *phydev) phydev->link = 0; if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) phydev->drv->config_intr(phydev); + return genphy_config_aneg(phydev); } return 0; -- cgit v1.2.3-71-gd317 From 47c332deb8e89f6c59b0bb2615945c6e7fad1a60 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 5 Dec 2017 09:36:14 +0100 Subject: hwmon: Deal with errors from the thermal subsystem If the thermal subsystem returne -EPROBE_DEFER or any other error when hwmon calls devm_thermal_zone_of_sensor_register(), this is silently ignored. I ran into this with an incorrectly defined thermal zone, making it non-existing and thus this call failed with -EPROBE_DEFER assuming it would appear later. The sensor was still added which is incorrect: sensors must strictly be added after the thermal zones, so deferred probe must be respected. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Signed-off-by: Linus Walleij Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index c9790e2c3440..af5123042990 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -143,6 +143,7 @@ static int hwmon_thermal_add_sensor(struct device *dev, struct hwmon_device *hwdev, int index) { struct hwmon_thermal_data *tdata; + struct thermal_zone_device *tzd; tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL); if (!tdata) @@ -151,8 +152,14 @@ static int hwmon_thermal_add_sensor(struct device *dev, tdata->hwdev = hwdev; tdata->index = index; - devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata, - &hwmon_thermal_ops); + tzd = devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata, + &hwmon_thermal_ops); + /* + * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV, + * so ignore that error but forward any other error. + */ + if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV)) + return PTR_ERR(tzd); return 0; } @@ -621,14 +628,20 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, if (!chip->ops->is_visible(drvdata, hwmon_temp, hwmon_temp_input, j)) continue; - if (info[i]->config[j] & HWMON_T_INPUT) - hwmon_thermal_add_sensor(dev, hwdev, j); + if (info[i]->config[j] & HWMON_T_INPUT) { + err = hwmon_thermal_add_sensor(dev, + hwdev, j); + if (err) + goto free_device; + } } } } return hdev; +free_device: + device_unregister(hdev); free_hwmon: kfree(hwdev); ida_remove: -- cgit v1.2.3-71-gd317 From 756efe131088b6e6e7f0124ff9c4e1f0165d3140 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 22 Dec 2017 17:46:04 +0800 Subject: clk: use atomic runtime pm api in clk_core_is_enabled Current clk_pm_runtime_put is using pm_runtime_put_sync which is not safe to be called in clk_core_is_enabled as it should be able to run in atomic context. Thus use pm_runtime_put instead which is atomic safe. Cc: Stephen Boyd Cc: Michael Turquette Cc: Ulf Hansson Cc: Marek Szyprowski Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Dong Aisheng Reviewed-by: Ulf Hansson Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 8a1860a36c77..b56c11f51baf 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -220,7 +220,8 @@ static bool clk_core_is_enabled(struct clk_core *core) ret = core->ops->is_enabled(core->hw); done: - clk_pm_runtime_put(core); + if (core->dev) + pm_runtime_put(core->dev); return ret; } -- cgit v1.2.3-71-gd317 From c6a36ad383559a60a249aa6016cebf3cb8b6c485 Mon Sep 17 00:00:00 2001 From: Max Schulze Date: Wed, 20 Dec 2017 20:47:44 +0100 Subject: USB: serial: ftdi_sio: add id for Airbus DS P8GR Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1aba9105b369..fc68952c994a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1013,6 +1013,7 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) }, + { USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4faa09fe308c..8b4ecd2bd297 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -914,6 +914,12 @@ #define ICPDAS_I7561U_PID 0x0104 #define ICPDAS_I7563U_PID 0x0105 +/* + * Airbus Defence and Space + */ +#define AIRBUS_DS_VID 0x1e8e /* Vendor ID */ +#define AIRBUS_DS_P8GR 0x6001 /* Tetra P8GR */ + /* * RT Systems programming cables for various ham radios */ -- cgit v1.2.3-71-gd317 From 052f71e25a7ecd80a9567b291df8ea333d9a8565 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 21 Dec 2017 15:06:13 +0200 Subject: xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate Free the virt_device and its debugfs_private member together. When resuming from hibernate the .free_dev callback unconditionally freed the debugfs_private member, but could leave virt_device intact. This triggered a NULL pointer dereference after resume when usbmuxd sent a USBDEVFS_SETCONFIGURATION ioctl to a device, trying to add a endpoint debugfs entry to a already freed debugfs_private pointer. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Reported-by: Alexander Kappner Tested-by: Alexander Kappner Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2424d3020ca3..da6dbe3ebd8b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3525,8 +3525,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_slot_ctx *slot_ctx; int i, ret; - xhci_debugfs_remove_slot(xhci, udev->slot_id); - #ifndef CONFIG_USB_DEFAULT_PERSIST /* * We called pm_runtime_get_noresume when the device was attached. @@ -3555,8 +3553,10 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) } ret = xhci_disable_slot(xhci, udev->slot_id); - if (ret) + if (ret) { + xhci_debugfs_remove_slot(xhci, udev->slot_id); xhci_free_virt_device(xhci, udev->slot_id); + } } int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) -- cgit v1.2.3-71-gd317 From dde634057da71a3505d7a6c0b77bb24ded6728c8 Mon Sep 17 00:00:00 2001 From: Alexander Kappner Date: Thu, 21 Dec 2017 15:06:14 +0200 Subject: xhci: Fix use-after-free in xhci debugfs Trying to read from debugfs after the system has resumed from hibernate causes a use-after-free and thus a protection fault. Steps to reproduce: Hibernate system, resume from hibernate, then run $ cat /sys/kernel/debug/usb/xhci/*/command-ring/enqueue [ 3902.765086] general protection fault: 0000 [#1] PREEMPT SMP ... [ 3902.765136] RIP: 0010:xhci_trb_virt_to_dma.part.50+0x5/0x30 ... [ 3902.765178] Call Trace: [ 3902.765188] xhci_ring_enqueue_show+0x1e/0x40 [ 3902.765197] seq_read+0xdb/0x3a0 [ 3902.765204] ? __handle_mm_fault+0x5fb/0x1210 [ 3902.765211] full_proxy_read+0x4a/0x70 [ 3902.765219] __vfs_read+0x23/0x120 [ 3902.765228] vfs_read+0x8e/0x130 [ 3902.765235] SyS_read+0x42/0x90 [ 3902.765242] do_syscall_64+0x6b/0x290 [ 3902.765251] entry_SYSCALL64_slow_path+0x25/0x25 The issue is caused by the xhci ring structures being reallocated when the system is resumed, but pointers to the old structures being retained in the debugfs files "private" field: The proposed patch fixes this issue by storing a pointer to the xhci_ring field in the xhci device structure in debugfs rather than directly storing a pointer to the xhci_ring. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Signed-off-by: Alexander Kappner Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-debugfs.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 4f7895dbcf88..e26e685d8a57 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -162,7 +162,7 @@ static void xhci_debugfs_extcap_regset(struct xhci_hcd *xhci, int cap_id, static int xhci_ring_enqueue_show(struct seq_file *s, void *unused) { dma_addr_t dma; - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; dma = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); seq_printf(s, "%pad\n", &dma); @@ -173,7 +173,7 @@ static int xhci_ring_enqueue_show(struct seq_file *s, void *unused) static int xhci_ring_dequeue_show(struct seq_file *s, void *unused) { dma_addr_t dma; - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; dma = xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); seq_printf(s, "%pad\n", &dma); @@ -183,7 +183,7 @@ static int xhci_ring_dequeue_show(struct seq_file *s, void *unused) static int xhci_ring_cycle_show(struct seq_file *s, void *unused) { - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; seq_printf(s, "%d\n", ring->cycle_state); @@ -346,7 +346,7 @@ static void xhci_debugfs_create_files(struct xhci_hcd *xhci, } static struct dentry *xhci_debugfs_create_ring_dir(struct xhci_hcd *xhci, - struct xhci_ring *ring, + struct xhci_ring **ring, const char *name, struct dentry *parent) { @@ -387,7 +387,7 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index); epriv->root = xhci_debugfs_create_ring_dir(xhci, - dev->eps[ep_index].new_ring, + &dev->eps[ep_index].new_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv; @@ -423,7 +423,7 @@ void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id) priv->dev = dev; dev->debugfs_private = priv; - xhci_debugfs_create_ring_dir(xhci, dev->eps[0].ring, + xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00", priv->root); xhci_debugfs_create_context_files(xhci, priv->root, slot_id); @@ -488,11 +488,11 @@ void xhci_debugfs_init(struct xhci_hcd *xhci) ARRAY_SIZE(xhci_extcap_dbc), "reg-ext-dbc"); - xhci_debugfs_create_ring_dir(xhci, xhci->cmd_ring, + xhci_debugfs_create_ring_dir(xhci, &xhci->cmd_ring, "command-ring", xhci->debugfs_root); - xhci_debugfs_create_ring_dir(xhci, xhci->event_ring, + xhci_debugfs_create_ring_dir(xhci, &xhci->event_ring, "event-ring", xhci->debugfs_root); -- cgit v1.2.3-71-gd317 From da99706689481717998d1d48edd389f339eea979 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 21 Dec 2017 15:06:15 +0200 Subject: usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Cc: Signed-off-by: Daniel Thompson Acked-by: Ard Biesheuvel Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7ef1274ef7f7..1aad89b8aba0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -177,6 +177,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; xhci->quirks |= XHCI_BROKEN_STREAMS; } + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0014) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) xhci->quirks |= XHCI_RESET_ON_RESUME; -- cgit v1.2.3-71-gd317 From 178e5f57a8d8f8fc5799a624b96fc31ef9a29ffa Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Fri, 22 Dec 2017 17:12:09 +0800 Subject: net: fec: unmap the xmit buffer that are not transferred by DMA The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 610573855213..8184d2fca9be 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -818,6 +818,12 @@ static void fec_enet_bd_init(struct net_device *dev) for (i = 0; i < txq->bd.ring_size; i++) { /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = cpu_to_fec16(0); + if (bdp->cbd_bufaddr && + !IS_TSO_HEADER(txq, fec32_to_cpu(bdp->cbd_bufaddr))) + dma_unmap_single(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), + DMA_TO_DEVICE); if (txq->tx_skbuff[i]) { dev_kfree_skb_any(txq->tx_skbuff[i]); txq->tx_skbuff[i] = NULL; -- cgit v1.2.3-71-gd317 From 5a8bae9761dc5dd409ff5c3a529b2801bd0dac3a Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Fri, 22 Dec 2017 16:05:27 +0530 Subject: tg3: Update copyright Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 6 ++++-- drivers/net/ethernet/broadcom/tg3.h | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d09c5a9c53b5..5fe8d9b05f31 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4,11 +4,13 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005-2014 Broadcom Corporation. + * Copyright (C) 2005-2016 Broadcom Corporation. + * Copyright (C) 2016-2017 Broadcom Limited. * * Firmware is: * Derived from proprietary unpublished source code, - * Copyright (C) 2000-2003 Broadcom Corporation. + * Copyright (C) 2000-2016 Broadcom Corporation. + * Copyright (C) 2016-2017 Broadcom Ltd. * * Permission is hereby granted for the distribution of this firmware * data in hexadecimal or equivalent format, provided this copyright diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index c2d02d02d1e6..3d60fc7a2da6 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -5,7 +5,8 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2007-2014 Broadcom Corporation. + * Copyright (C) 2007-2016 Broadcom Corporation. + * Copyright (C) 2016-2017 Broadcom Limited. */ #ifndef _T3_H -- cgit v1.2.3-71-gd317 From 4419bb1cedcda0272e1dc410345c5a1d1da0e367 Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Fri, 22 Dec 2017 16:05:28 +0530 Subject: tg3: Add workaround to restrict 5762 MRRS to 2048 One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 10 ++++++++++ drivers/net/ethernet/broadcom/tg3.h | 4 ++++ 2 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 5fe8d9b05f31..a0caa71a8c3b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -10054,6 +10054,16 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tw32(GRC_MODE, tp->grc_mode | val); + /* On one of the AMD platform, MRRS is restricted to 4000 because of + * south bridge limitation. As a workaround, Driver is setting MRRS + * to 2048 instead of default 4096. + */ + if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && + tp->pdev->subsystem_device == TG3PCI_SUBDEVICE_ID_DELL_5762) { + val = tr32(TG3PCI_DEV_STATUS_CTRL) & ~MAX_READ_REQ_MASK; + tw32(TG3PCI_DEV_STATUS_CTRL, val | MAX_READ_REQ_SIZE_2048); + } + /* Setup the timer prescalar register. Clock is always 66Mhz. */ val = tr32(GRC_MISC_CFG); val &= ~0xff; diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 3d60fc7a2da6..1f0271fa7c74 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -97,6 +97,7 @@ #define TG3PCI_SUBDEVICE_ID_DELL_JAGUAR 0x0106 #define TG3PCI_SUBDEVICE_ID_DELL_MERLOT 0x0109 #define TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT 0x010a +#define TG3PCI_SUBDEVICE_ID_DELL_5762 0x07f0 #define TG3PCI_SUBVENDOR_ID_COMPAQ PCI_VENDOR_ID_COMPAQ #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE 0x007c #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2 0x009a @@ -282,6 +283,9 @@ #define TG3PCI_STD_RING_PROD_IDX 0x00000098 /* 64-bit */ #define TG3PCI_RCV_RET_RING_CON_IDX 0x000000a0 /* 64-bit */ /* 0xa8 --> 0xb8 unused */ +#define TG3PCI_DEV_STATUS_CTRL 0x000000b4 +#define MAX_READ_REQ_SIZE_2048 0x00004000 +#define MAX_READ_REQ_MASK 0x00007000 #define TG3PCI_DUAL_MAC_CTRL 0x000000b8 #define DUAL_MAC_CTRL_CH_MASK 0x00000003 #define DUAL_MAC_CTRL_ID 0x00000004 -- cgit v1.2.3-71-gd317 From e60ee41aaf898584205a6af5c996860d0fe6a836 Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Fri, 22 Dec 2017 16:05:29 +0530 Subject: tg3: Enable PHY reset in MTU change path for 5720 A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a0caa71a8c3b..8995cfefbfcf 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14239,7 +14239,8 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) */ if (tg3_asic_rev(tp) == ASIC_REV_57766 || tg3_asic_rev(tp) == ASIC_REV_5717 || - tg3_asic_rev(tp) == ASIC_REV_5719) + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) reset_phy = true; err = tg3_restart_hw(tp, reset_phy); -- cgit v1.2.3-71-gd317 From f7084059a9cb9e56a186e1677b1dcffd76c2cd24 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Fri, 22 Dec 2017 13:01:39 -0200 Subject: bnx2x: Improve reliability in case of nested PCI errors While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem Signed-off-by: Guilherme G. Piccoli Acked-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 4c739d5355d2..8ae269ec17a1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3030,7 +3030,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) del_timer_sync(&bp->timer); - if (IS_PF(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* Set ALWAYS_ALIVE bit in shmem */ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; bnx2x_drv_pulse(bp); @@ -3116,7 +3116,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) bp->cnic_loaded = false; /* Clear driver version indication in shmem */ - if (IS_PF(bp)) + if (IS_PF(bp) && !BP_NOMCP(bp)) bnx2x_update_mng_version(bp); /* Check if there are pending parity attentions. If there are - set diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 91e2a7560b48..ddd5d3ebd201 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9578,6 +9578,15 @@ static int bnx2x_init_shmem(struct bnx2x *bp) do { bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + + /* If we read all 0xFFs, means we are in PCI error state and + * should bail out to avoid crashes on adapter's FW reads. + */ + if (bp->common.shmem_base == 0xFFFFFFFF) { + bp->flags |= NO_MCP_FLAG; + return -ENODEV; + } + if (bp->common.shmem_base) { val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); if (val & SHR_MEM_VALIDITY_MB) @@ -14320,7 +14329,10 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) BNX2X_ERR("IO slot reset --> driver unload\n"); /* MCP should have been reset; Need to wait for validity */ - bnx2x_init_shmem(bp); + if (bnx2x_init_shmem(bp)) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { u32 v; -- cgit v1.2.3-71-gd317 From 2b83ff96f51d0b039c4561b9f95c824d7bddb85c Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Tue, 12 Dec 2017 11:10:44 +0100 Subject: led: core: Fix brightness setting when setting delay_off=0 With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set *** stop timer ** led_blink_setup ** led_set_software_blink *** if !delay_on, led off *** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop *** otherwise start timer/set LED_BLINK_SW flag echo xxx > brightness * led_set_brightness ** if LED_BLINK_SW *** if brightness=0, led off *** else apply brightness if next timer <--- timer is stop, and will never apply new setting ** otherwise set led_set_brightness_nosleep To fix that, when we delete the timer, we should clear LED_BLINK_SW. Cc: linux-leds@vger.kernel.org Signed-off-by: Matthieu CASTET Signed-off-by: Jacek Anaszewski --- drivers/leds/led-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index fd83c7f77a95..f3654fd2eaf3 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -186,7 +186,7 @@ void led_blink_set(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off) { - del_timer_sync(&led_cdev->blink_timer); + led_stop_software_blink(led_cdev); clear_bit(LED_BLINK_ONESHOT, &led_cdev->work_flags); clear_bit(LED_BLINK_ONESHOT_STOP, &led_cdev->work_flags); -- cgit v1.2.3-71-gd317 From ad9a3668a434faca1339789ed2f043d679199309 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Sun, 24 Dec 2017 13:54:56 +0200 Subject: IB/mlx5: Serialize access to the VMA list User-space applications can do mmap and munmap directly at any time. Since the VMA list is not protected with a mutex, concurrent accesses to the VMA list from the mmap and munmap can cause data corruption. Add a mutex around the list. Cc: # v4.7 Fixes: 7c2344c3bbf9 ("IB/mlx5: Implements disassociate_ucontext API") Reviewed-by: Yishai Hadas Signed-off-by: Majd Dibbiny Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/main.c | 8 ++++++++ drivers/infiniband/hw/mlx5/mlx5_ib.h | 4 ++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index b4ef4d9b6ce5..8ac50de2b242 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1463,6 +1463,7 @@ static struct ib_ucontext *mlx5_ib_alloc_ucontext(struct ib_device *ibdev, } INIT_LIST_HEAD(&context->vma_private_list); + mutex_init(&context->vma_private_list_mutex); INIT_LIST_HEAD(&context->db_page_list); mutex_init(&context->db_page_mutex); @@ -1624,7 +1625,9 @@ static void mlx5_ib_vma_close(struct vm_area_struct *area) * mlx5_ib_disassociate_ucontext(). */ mlx5_ib_vma_priv_data->vma = NULL; + mutex_lock(mlx5_ib_vma_priv_data->vma_private_list_mutex); list_del(&mlx5_ib_vma_priv_data->list); + mutex_unlock(mlx5_ib_vma_priv_data->vma_private_list_mutex); kfree(mlx5_ib_vma_priv_data); } @@ -1644,10 +1647,13 @@ static int mlx5_ib_set_vma_data(struct vm_area_struct *vma, return -ENOMEM; vma_prv->vma = vma; + vma_prv->vma_private_list_mutex = &ctx->vma_private_list_mutex; vma->vm_private_data = vma_prv; vma->vm_ops = &mlx5_ib_vm_ops; + mutex_lock(&ctx->vma_private_list_mutex); list_add(&vma_prv->list, vma_head); + mutex_unlock(&ctx->vma_private_list_mutex); return 0; } @@ -1690,6 +1696,7 @@ static void mlx5_ib_disassociate_ucontext(struct ib_ucontext *ibcontext) * mlx5_ib_vma_close. */ down_write(&owning_mm->mmap_sem); + mutex_lock(&context->vma_private_list_mutex); list_for_each_entry_safe(vma_private, n, &context->vma_private_list, list) { vma = vma_private->vma; @@ -1704,6 +1711,7 @@ static void mlx5_ib_disassociate_ucontext(struct ib_ucontext *ibcontext) list_del(&vma_private->list); kfree(vma_private); } + mutex_unlock(&context->vma_private_list_mutex); up_write(&owning_mm->mmap_sem); mmput(owning_mm); put_task_struct(owning_process); diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h index 6dd8cac78de2..2c5f3533bbc9 100644 --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h @@ -115,6 +115,8 @@ enum { struct mlx5_ib_vma_private_data { struct list_head list; struct vm_area_struct *vma; + /* protect vma_private_list add/del */ + struct mutex *vma_private_list_mutex; }; struct mlx5_ib_ucontext { @@ -129,6 +131,8 @@ struct mlx5_ib_ucontext { /* Transport Domain number */ u32 tdn; struct list_head vma_private_list; + /* protect vma_private_list add/del */ + struct mutex vma_private_list_mutex; unsigned long upd_xlt_page; /* protect ODP/KSM */ -- cgit v1.2.3-71-gd317 From 05d14e7b0c138cb07ba30e464f47b39434f3fdef Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Sun, 24 Dec 2017 13:54:57 +0200 Subject: IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp() If the input command length is larger than the kernel supports an error should be returned in case the unsupported bytes are not cleared, instead of the other way aroudn. This matches what all other callers of ib_is_udata_cleared do and will avoid user ABI problems in the future. Cc: # v4.10 Fixes: 189aba99e700 ("IB/uverbs: Extend modify_qp and support packet pacing") Reviewed-by: Yishai Hadas Signed-off-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index d0202bb176a4..840b24096690 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -2074,8 +2074,8 @@ int ib_uverbs_ex_modify_qp(struct ib_uverbs_file *file, return -EOPNOTSUPP; if (ucore->inlen > sizeof(cmd)) { - if (ib_is_udata_cleared(ucore, sizeof(cmd), - ucore->inlen - sizeof(cmd))) + if (!ib_is_udata_cleared(ucore, sizeof(cmd), + ucore->inlen - sizeof(cmd))) return -EOPNOTSUPP; } -- cgit v1.2.3-71-gd317 From 4a50881bbac309e6f0684816a180bc3c14e1485d Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Sun, 24 Dec 2017 13:54:58 +0200 Subject: IB/core: Verify that QP is security enabled in create and destroy The XRC target QP create flow sets up qp_sec only if there is an IB link with LSM security enabled. However, several other related uAPI entry points blindly follow the qp_sec NULL pointer, resulting in a possible oops. Check for NULL before using qp_sec. Cc: # v4.12 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Reviewed-by: Daniel Jurgens Signed-off-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/security.c | 3 +++ drivers/infiniband/core/verbs.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/security.c b/drivers/infiniband/core/security.c index feafdb961c48..59b2f96d986a 100644 --- a/drivers/infiniband/core/security.c +++ b/drivers/infiniband/core/security.c @@ -386,6 +386,9 @@ int ib_open_shared_qp_security(struct ib_qp *qp, struct ib_device *dev) if (ret) return ret; + if (!qp->qp_sec) + return 0; + mutex_lock(&real_qp->qp_sec->mutex); ret = check_qp_port_pkey_settings(real_qp->qp_sec->ports_pkeys, qp->qp_sec); diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 3fb8fb6cc824..e36d27ed4daa 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -1438,7 +1438,8 @@ int ib_close_qp(struct ib_qp *qp) spin_unlock_irqrestore(&real_qp->device->event_handler_lock, flags); atomic_dec(&real_qp->usecnt); - ib_close_shared_qp_security(qp->qp_sec); + if (qp->qp_sec) + ib_close_shared_qp_security(qp->qp_sec); kfree(qp); return 0; -- cgit v1.2.3-71-gd317 From 45e6ae7ef21b907dacb18da62d5787d74a31d860 Mon Sep 17 00:00:00 2001 From: Nitzan Carmi Date: Tue, 26 Dec 2017 11:20:20 +0200 Subject: IB/mlx5: Fix mlx5_ib_alloc_mr error flow ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy Signed-off-by: Nitzan Carmi Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/mr.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index ee0ee1f9994b..d109fe8290a7 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1637,6 +1637,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd, MLX5_SET(mkc, mkc, access_mode, mr->access_mode); MLX5_SET(mkc, mkc, umr_en, 1); + mr->ibmr.device = pd->device; err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen); if (err) goto err_destroy_psv; -- cgit v1.2.3-71-gd317 From 39c3fd58952d7599d367c84c1330b785d91d6088 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 2 Dec 2017 18:11:04 +0100 Subject: kernel/irq: Extend lockdep class for request mutex The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn Signed-off-by: Thomas Gleixner Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch --- arch/powerpc/sysdev/fsl_msi.c | 4 +++- drivers/gpio/gpio-bcm-kona.c | 3 ++- drivers/gpio/gpio-brcmstb.c | 4 +++- drivers/gpio/gpio-tegra.c | 4 +++- drivers/gpio/gpiolib.c | 27 ++++++++++++++++--------- drivers/irqchip/irq-renesas-intc-irqpin.c | 6 +++++- drivers/mfd/arizona-irq.c | 4 +++- drivers/pinctrl/pinctrl-single.c | 5 ++++- include/linux/gpio/driver.h | 33 ++++++++++++++++++++----------- include/linux/irqdesc.h | 9 ++++++--- kernel/irq/generic-chip.c | 11 +++++++---- 11 files changed, 75 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 44cbf4c12ea1..df95102e732c 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -354,6 +354,7 @@ static int fsl_of_msi_remove(struct platform_device *ofdev) } static struct lock_class_key fsl_msi_irq_class; +static struct lock_class_key fsl_msi_irq_request_class; static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev, int offset, int irq_index) @@ -373,7 +374,8 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev, dev_err(&dev->dev, "No memory for MSI cascade data\n"); return -ENOMEM; } - irq_set_lockdep_class(virt_msir, &fsl_msi_irq_class); + irq_set_lockdep_class(virt_msir, &fsl_msi_irq_class, + &fsl_msi_irq_request_class); cascade_data->index = offset; cascade_data->msi_data = msi; cascade_data->virq = virt_msir; diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index dfcf56ee3c61..76861a00bb92 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -522,6 +522,7 @@ static struct of_device_id const bcm_kona_gpio_of_match[] = { * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; +static struct lock_class_key gpio_request_class; static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq) @@ -531,7 +532,7 @@ static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, ret = irq_set_chip_data(irq, d->host_data); if (ret < 0) return ret; - irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class); irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq); irq_set_noprobe(irq); diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c index 545d43a587b7..5b24801bffef 100644 --- a/drivers/gpio/gpio-brcmstb.c +++ b/drivers/gpio/gpio-brcmstb.c @@ -327,6 +327,7 @@ static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank( * category than their parents, so it won't report false recursion. */ static struct lock_class_key brcmstb_gpio_irq_lock_class; +static struct lock_class_key brcmstb_gpio_irq_request_class; static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, @@ -346,7 +347,8 @@ static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, ret = irq_set_chip_data(irq, &bank->gc); if (ret < 0) return ret; - irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class); + irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, + &brcmstb_gpio_irq_lock_class); irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); irq_set_noprobe(irq); return 0; diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 8db47f671708..02fa8fe2292a 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -565,6 +565,7 @@ static const struct dev_pm_ops tegra_gpio_pm_ops = { * than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; +static struct lock_class_key gpio_request_class; static int tegra_gpio_probe(struct platform_device *pdev) { @@ -670,7 +671,8 @@ static int tegra_gpio_probe(struct platform_device *pdev) bank = &tgi->bank_info[GPIO_BANK(gpio)]; - irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class, + &gpio_request_class); irq_set_chip_data(irq, bank); irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq); } diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index aad84a6306c4..44332b793718 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -73,7 +73,8 @@ LIST_HEAD(gpio_devices); static void gpiochip_free_hogs(struct gpio_chip *chip); static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, - struct lock_class_key *key); + struct lock_class_key *lock_key, + struct lock_class_key *request_key); static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip); static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip); static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip); @@ -1100,7 +1101,8 @@ static void gpiochip_setup_devs(void) } int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, - struct lock_class_key *key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { unsigned long flags; int status = 0; @@ -1246,7 +1248,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, if (status) goto err_remove_from_list; - status = gpiochip_add_irqchip(chip, key); + status = gpiochip_add_irqchip(chip, lock_key, request_key); if (status) goto err_remove_chip; @@ -1632,7 +1634,7 @@ int gpiochip_irq_map(struct irq_domain *d, unsigned int irq, * This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ - irq_set_lockdep_class(irq, chip->irq.lock_key); + irq_set_lockdep_class(irq, chip->irq.lock_key, chip->irq.request_key); irq_set_chip_and_handler(irq, chip->irq.chip, chip->irq.handler); /* Chips that use nested thread handlers have them marked */ if (chip->irq.threaded) @@ -1712,10 +1714,12 @@ static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset) /** * gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip * @gpiochip: the GPIO chip to add the IRQ chip to - * @lock_key: lockdep class + * @lock_key: lockdep class for IRQ lock + * @request_key: lockdep class for IRQ request */ static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, - struct lock_class_key *lock_key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { struct irq_chip *irqchip = gpiochip->irq.chip; const struct irq_domain_ops *ops; @@ -1753,6 +1757,7 @@ static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, gpiochip->to_irq = gpiochip_to_irq; gpiochip->irq.default_type = type; gpiochip->irq.lock_key = lock_key; + gpiochip->irq.request_key = request_key; if (gpiochip->irq.domain_ops) ops = gpiochip->irq.domain_ops; @@ -1850,7 +1855,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE * to have the core avoid setting up any default type in the hardware. * @threaded: whether this irqchip uses a nested thread handler - * @lock_key: lockdep class + * @lock_key: lockdep class for IRQ lock + * @request_key: lockdep class for IRQ request * * This function closely associates a certain irqchip with a certain * gpiochip, providing an irq domain to translate the local IRQs to @@ -1872,7 +1878,8 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, irq_flow_handler_t handler, unsigned int type, bool threaded, - struct lock_class_key *lock_key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { struct device_node *of_node; @@ -1913,6 +1920,7 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, gpiochip->irq.default_type = type; gpiochip->to_irq = gpiochip_to_irq; gpiochip->irq.lock_key = lock_key; + gpiochip->irq.request_key = request_key; gpiochip->irq.domain = irq_domain_add_simple(of_node, gpiochip->ngpio, first_irq, &gpiochip_domain_ops, gpiochip); @@ -1940,7 +1948,8 @@ EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key); #else /* CONFIG_GPIOLIB_IRQCHIP */ static inline int gpiochip_add_irqchip(struct gpio_chip *gpiochip, - struct lock_class_key *key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { return 0; } diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c index 06f29cf5018a..cee59fe1321c 100644 --- a/drivers/irqchip/irq-renesas-intc-irqpin.c +++ b/drivers/irqchip/irq-renesas-intc-irqpin.c @@ -342,6 +342,9 @@ static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id) */ static struct lock_class_key intc_irqpin_irq_lock_class; +/* And this is for the request mutex */ +static struct lock_class_key intc_irqpin_irq_request_class; + static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { @@ -352,7 +355,8 @@ static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, intc_irqpin_dbg(&p->irq[hw], "map"); irq_set_chip_data(virq, h->host_data); - irq_set_lockdep_class(virq, &intc_irqpin_irq_lock_class); + irq_set_lockdep_class(virq, &intc_irqpin_irq_lock_class, + &intc_irqpin_irq_request_class); irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); return 0; } diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index 09cf3699e354..a307832d7e45 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -184,6 +184,7 @@ static struct irq_chip arizona_irq_chip = { }; static struct lock_class_key arizona_irq_lock_class; +static struct lock_class_key arizona_irq_request_class; static int arizona_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) @@ -191,7 +192,8 @@ static int arizona_irq_map(struct irq_domain *h, unsigned int virq, struct arizona *data = h->host_data; irq_set_chip_data(virq, data); - irq_set_lockdep_class(virq, &arizona_irq_lock_class); + irq_set_lockdep_class(virq, &arizona_irq_lock_class, + &arizona_irq_request_class); irq_set_chip_and_handler(virq, &arizona_irq_chip, handle_simple_irq); irq_set_nested_thread(virq, 1); irq_set_noprobe(virq); diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index e6cd8de793e2..3501491e5bfc 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -222,6 +222,9 @@ static enum pin_config_param pcs_bias[] = { */ static struct lock_class_key pcs_lock_class; +/* Class for the IRQ request mutex */ +static struct lock_class_key pcs_request_class; + /* * REVISIT: Reads and writes could eventually use regmap or something * generic. But at least on omaps, some mux registers are performance @@ -1486,7 +1489,7 @@ static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq, irq_set_chip_data(irq, pcs_soc); irq_set_chip_and_handler(irq, &pcs->chip, handle_level_irq); - irq_set_lockdep_class(irq, &pcs_lock_class); + irq_set_lockdep_class(irq, &pcs_lock_class, &pcs_request_class); irq_set_noprobe(irq); return 0; diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 55e672592fa9..7258cd676df4 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -66,9 +66,10 @@ struct gpio_irq_chip { /** * @lock_key: * - * Per GPIO IRQ chip lockdep class. + * Per GPIO IRQ chip lockdep classes. */ struct lock_class_key *lock_key; + struct lock_class_key *request_key; /** * @parent_handler: @@ -323,7 +324,8 @@ extern const char *gpiochip_is_requested(struct gpio_chip *chip, /* add/remove chips */ extern int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, - struct lock_class_key *lock_key); + struct lock_class_key *lock_key, + struct lock_class_key *request_key); /** * gpiochip_add_data() - register a gpio_chip @@ -350,11 +352,13 @@ extern int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, */ #ifdef CONFIG_LOCKDEP #define gpiochip_add_data(chip, data) ({ \ - static struct lock_class_key key; \ - gpiochip_add_data_with_key(chip, data, &key); \ + static struct lock_class_key lock_key; \ + static struct lock_class_key request_key; \ + gpiochip_add_data_with_key(chip, data, &lock_key, \ + &request_key); \ }) #else -#define gpiochip_add_data(chip, data) gpiochip_add_data_with_key(chip, data, NULL) +#define gpiochip_add_data(chip, data) gpiochip_add_data_with_key(chip, data, NULL, NULL) #endif static inline int gpiochip_add(struct gpio_chip *chip) @@ -429,7 +433,8 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, irq_flow_handler_t handler, unsigned int type, bool threaded, - struct lock_class_key *lock_key); + struct lock_class_key *lock_key, + struct lock_class_key *request_key); #ifdef CONFIG_LOCKDEP @@ -445,10 +450,12 @@ static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, irq_flow_handler_t handler, unsigned int type) { - static struct lock_class_key key; + static struct lock_class_key lock_key; + static struct lock_class_key request_key; return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, false, &key); + handler, type, false, + &lock_key, &request_key); } static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, @@ -458,10 +465,12 @@ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, unsigned int type) { - static struct lock_class_key key; + static struct lock_class_key lock_key; + static struct lock_class_key request_key; return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, true, &key); + handler, type, true, + &lock_key, &request_key); } #else static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, @@ -471,7 +480,7 @@ static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, unsigned int type) { return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, false, NULL); + handler, type, false, NULL, NULL); } static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, @@ -481,7 +490,7 @@ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, unsigned int type) { return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, true, NULL); + handler, type, true, NULL, NULL); } #endif /* CONFIG_LOCKDEP */ diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 39fb3700f7a9..25b33b664537 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -255,12 +255,15 @@ static inline bool irq_is_percpu_devid(unsigned int irq) } static inline void -irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class) +irq_set_lockdep_class(unsigned int irq, struct lock_class_key *lock_class, + struct lock_class_key *request_class) { struct irq_desc *desc = irq_to_desc(irq); - if (desc) - lockdep_set_class(&desc->lock, class); + if (desc) { + lockdep_set_class(&desc->lock, lock_class); + lockdep_set_class(&desc->request_mutex, request_class); + } } #ifdef CONFIG_IRQ_PREFLOW_FASTEOI diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c index c26c5bb6b491..508c03dfef25 100644 --- a/kernel/irq/generic-chip.c +++ b/kernel/irq/generic-chip.c @@ -364,10 +364,11 @@ irq_get_domain_generic_chip(struct irq_domain *d, unsigned int hw_irq) EXPORT_SYMBOL_GPL(irq_get_domain_generic_chip); /* - * Separate lockdep class for interrupt chip which can nest irq_desc - * lock. + * Separate lockdep classes for interrupt chip which can nest irq_desc + * lock and request mutex. */ static struct lock_class_key irq_nested_lock_class; +static struct lock_class_key irq_nested_request_class; /* * irq_map_generic_chip - Map a generic chip for an irq domain @@ -409,7 +410,8 @@ int irq_map_generic_chip(struct irq_domain *d, unsigned int virq, set_bit(idx, &gc->installed); if (dgc->gc_flags & IRQ_GC_INIT_NESTED_LOCK) - irq_set_lockdep_class(virq, &irq_nested_lock_class); + irq_set_lockdep_class(virq, &irq_nested_lock_class, + &irq_nested_request_class); if (chip->irq_calc_mask) chip->irq_calc_mask(data); @@ -479,7 +481,8 @@ void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk, continue; if (flags & IRQ_GC_INIT_NESTED_LOCK) - irq_set_lockdep_class(i, &irq_nested_lock_class); + irq_set_lockdep_class(i, &irq_nested_lock_class, + &irq_nested_request_class); if (!(flags & IRQ_GC_NO_MASK)) { struct irq_data *d = irq_get_irq_data(i); -- cgit v1.2.3-71-gd317 From a31e58e129f73ab5b04016330b13ed51fde7a961 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 28 Dec 2017 11:33:33 +0100 Subject: x86/apic: Switch all APICs to Fixed delivery mode Some of the APIC incarnations are operating in lowest priority delivery mode. This worked as long as the vector management code allocated the same vector on all possible CPUs for each interrupt. Lowest priority delivery mode does not necessarily respect the affinity setting and may redirect to some other online CPU. This was documented somewhere in the old code and the conversion to single target delivery missed to update the delivery mode of the affected APIC drivers which results in spurious interrupts on some of the affected CPU/Chipset combinations. Switch the APIC drivers over to Fixed delivery mode and remove all leftovers of lowest priority delivery mode. Switching to Fixed delivery mode is not a problem on these CPUs because the kernel already uses Fixed delivery mode for IPIs. The reason for this is that th SDM explicitely forbids lowest prio mode for IPIs. The reason is obvious: If the irq routing does not honor destination targets in lowest prio mode then an IPI targeted at CPU1 might end up on CPU0, which would be a fatal problem in many cases. As a consequence of this change, the apic::irq_delivery_mode field is now pointless, but this needs to be cleaned up in a separate patch. Fixes: fdba46ffb4c2 ("x86/apic: Get rid of multi CPU affinity") Reported-by: vcaputo@pengaru.com Signed-off-by: Thomas Gleixner Tested-by: vcaputo@pengaru.com Cc: Pavel Machek Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712281140440.1688@nanos --- arch/x86/kernel/apic/apic_flat_64.c | 2 +- arch/x86/kernel/apic/apic_noop.c | 2 +- arch/x86/kernel/apic/msi.c | 8 ++------ arch/x86/kernel/apic/probe_32.c | 2 +- arch/x86/kernel/apic/x2apic_cluster.c | 2 +- drivers/pci/host/pci-hyperv.c | 8 ++------ 6 files changed, 8 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index aa85690e9b64..25a87028cb3f 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -151,7 +151,7 @@ static struct apic apic_flat __ro_after_init = { .apic_id_valid = default_apic_id_valid, .apic_id_registered = flat_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, .irq_dest_mode = 1, /* logical */ .disable_esr = 0, diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index 7b659c4480c9..5078b5ce63a7 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -110,7 +110,7 @@ struct apic apic_noop __ro_after_init = { .apic_id_valid = default_apic_id_valid, .apic_id_registered = noop_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, /* logical delivery broadcast to all CPUs: */ .irq_dest_mode = 1, diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c index 9b18be764422..ce503c99f5c4 100644 --- a/arch/x86/kernel/apic/msi.c +++ b/arch/x86/kernel/apic/msi.c @@ -39,17 +39,13 @@ static void irq_msi_compose_msg(struct irq_data *data, struct msi_msg *msg) ((apic->irq_dest_mode == 0) ? MSI_ADDR_DEST_MODE_PHYSICAL : MSI_ADDR_DEST_MODE_LOGICAL) | - ((apic->irq_delivery_mode != dest_LowestPrio) ? - MSI_ADDR_REDIRECTION_CPU : - MSI_ADDR_REDIRECTION_LOWPRI) | + MSI_ADDR_REDIRECTION_CPU | MSI_ADDR_DEST_ID(cfg->dest_apicid); msg->data = MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | - ((apic->irq_delivery_mode != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED : - MSI_DATA_DELIVERY_LOWPRI) | + MSI_DATA_DELIVERY_FIXED | MSI_DATA_VECTOR(cfg->vector); } diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index fa22017de806..02e8acb134f8 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -105,7 +105,7 @@ static struct apic apic_default __ro_after_init = { .apic_id_valid = default_apic_id_valid, .apic_id_registered = default_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, /* logical delivery broadcast to all CPUs: */ .irq_dest_mode = 1, diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index 622f13ca8a94..8b04234e010b 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -184,7 +184,7 @@ static struct apic apic_x2apic_cluster __ro_after_init = { .apic_id_valid = x2apic_apic_id_valid, .apic_id_registered = x2apic_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, .irq_dest_mode = 1, /* logical */ .disable_esr = 0, diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c index 0fe3ea164ee5..e7d94473aedd 100644 --- a/drivers/pci/host/pci-hyperv.c +++ b/drivers/pci/host/pci-hyperv.c @@ -985,9 +985,7 @@ static u32 hv_compose_msi_req_v1( int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; int_pkt->int_desc.vector_count = 1; - int_pkt->int_desc.delivery_mode = - (apic->irq_delivery_mode == dest_LowestPrio) ? - dest_LowestPrio : dest_Fixed; + int_pkt->int_desc.delivery_mode = dest_Fixed; /* * Create MSI w/ dummy vCPU set, overwritten by subsequent retarget in @@ -1008,9 +1006,7 @@ static u32 hv_compose_msi_req_v2( int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; int_pkt->int_desc.vector_count = 1; - int_pkt->int_desc.delivery_mode = - (apic->irq_delivery_mode == dest_LowestPrio) ? - dest_LowestPrio : dest_Fixed; + int_pkt->int_desc.delivery_mode = dest_Fixed; /* * Create MSI w/ dummy vCPU set targeting just one vCPU, overwritten -- cgit v1.2.3-71-gd317 From 8880c13734af33635118a1e9567dadc7f9ddb7a8 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 16:29:15 +0100 Subject: gpio: brcmstb: Make really use of the new lockdep class The recent extension of irq_set_lockdep_class() with a second argument added the new lockdep class to the mrcmstb driver, but used the already existing lockdep class as second argument, which leaves the new lockdep class defined but unused. Use the new lockdep class as that's what the change intended to do. Fixes: 39c3fd58952d ("kernel/irq: Extend lockdep class for request mutex") Reported-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: Andrew Lunn Cc: linus.walleij@linaro.org --- drivers/gpio/gpio-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c index 5b24801bffef..bb4f8cf18bd9 100644 --- a/drivers/gpio/gpio-brcmstb.c +++ b/drivers/gpio/gpio-brcmstb.c @@ -348,7 +348,7 @@ static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, if (ret < 0) return ret; irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, - &brcmstb_gpio_irq_lock_class); + &brcmstb_gpio_irq_request_class); irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); irq_set_noprobe(irq); return 0; -- cgit v1.2.3-71-gd317 From 702cb0a02813299d6911b775c637906ae21b737d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 16:59:06 +0100 Subject: genirq/irqdomain: Rename early argument of irq_domain_activate_irq() The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner Cc: Alexandru Chirvasitu Cc: Andy Shevchenko Cc: Dou Liyang Cc: Pavel Machek Cc: Maciej W. Rozycki Cc: Mikael Pettersson Cc: Josh Poulson Cc: Mihai Costache Cc: Stephen Hemminger Cc: Marc Zyngier Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang Cc: Dexuan Cui Cc: Simon Xiao Cc: Saeed Mahameed Cc: Jork Loeser Cc: Bjorn Helgaas Cc: devel@linuxdriverproject.org Cc: KY Srinivasan Cc: Alan Cox Cc: Sakari Ailus , Cc: linux-media@vger.kernel.org --- arch/x86/include/asm/irqdomain.h | 2 +- arch/x86/include/asm/trace/irq_vectors.h | 16 ++++++++-------- arch/x86/kernel/apic/io_apic.c | 2 +- arch/x86/kernel/apic/vector.c | 6 +++--- arch/x86/platform/uv/uv_irq.c | 2 +- drivers/gpio/gpio-xgene-sb.c | 2 +- drivers/iommu/amd_iommu.c | 2 +- drivers/iommu/intel_irq_remapping.c | 2 +- drivers/irqchip/irq-gic-v3-its.c | 4 ++-- drivers/pinctrl/stm32/pinctrl-stm32.c | 2 +- include/linux/irqdomain.h | 2 +- kernel/irq/internals.h | 2 +- kernel/irq/irqdomain.c | 13 +++++++------ 13 files changed, 29 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h index 139feef467f7..c066ffae222b 100644 --- a/arch/x86/include/asm/irqdomain.h +++ b/arch/x86/include/asm/irqdomain.h @@ -44,7 +44,7 @@ extern int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs); extern int mp_irqdomain_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early); + struct irq_data *irq_data, bool reserve); extern void mp_irqdomain_deactivate(struct irq_domain *domain, struct irq_data *irq_data); extern int mp_irqdomain_ioapic_idx(struct irq_domain *domain); diff --git a/arch/x86/include/asm/trace/irq_vectors.h b/arch/x86/include/asm/trace/irq_vectors.h index 84b9ec0c1bc0..22647a642e98 100644 --- a/arch/x86/include/asm/trace/irq_vectors.h +++ b/arch/x86/include/asm/trace/irq_vectors.h @@ -283,34 +283,34 @@ TRACE_EVENT(vector_alloc_managed, DECLARE_EVENT_CLASS(vector_activate, TP_PROTO(unsigned int irq, bool is_managed, bool can_reserve, - bool early), + bool reserve), - TP_ARGS(irq, is_managed, can_reserve, early), + TP_ARGS(irq, is_managed, can_reserve, reserve), TP_STRUCT__entry( __field( unsigned int, irq ) __field( bool, is_managed ) __field( bool, can_reserve ) - __field( bool, early ) + __field( bool, reserve ) ), TP_fast_assign( __entry->irq = irq; __entry->is_managed = is_managed; __entry->can_reserve = can_reserve; - __entry->early = early; + __entry->reserve = reserve; ), - TP_printk("irq=%u is_managed=%d can_reserve=%d early=%d", + TP_printk("irq=%u is_managed=%d can_reserve=%d reserve=%d", __entry->irq, __entry->is_managed, __entry->can_reserve, - __entry->early) + __entry->reserve) ); #define DEFINE_IRQ_VECTOR_ACTIVATE_EVENT(name) \ DEFINE_EVENT_FN(vector_activate, name, \ TP_PROTO(unsigned int irq, bool is_managed, \ - bool can_reserve, bool early), \ - TP_ARGS(irq, is_managed, can_reserve, early), NULL, NULL); \ + bool can_reserve, bool reserve), \ + TP_ARGS(irq, is_managed, can_reserve, reserve), NULL, NULL); \ DEFINE_IRQ_VECTOR_ACTIVATE_EVENT(vector_activate); DEFINE_IRQ_VECTOR_ACTIVATE_EVENT(vector_deactivate); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 201579dc5242..8a7963421460 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2988,7 +2988,7 @@ void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, } int mp_irqdomain_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { unsigned long flags; diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index 1e969dba0476..52c85c8147e9 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -399,21 +399,21 @@ static int activate_managed(struct irq_data *irqd) } static int x86_vector_activate(struct irq_domain *dom, struct irq_data *irqd, - bool early) + bool reserve) { struct apic_chip_data *apicd = apic_chip_data(irqd); unsigned long flags; int ret = 0; trace_vector_activate(irqd->irq, apicd->is_managed, - apicd->can_reserve, early); + apicd->can_reserve, reserve); /* Nothing to do for fixed assigned vectors */ if (!apicd->can_reserve && !apicd->is_managed) return 0; raw_spin_lock_irqsave(&vector_lock, flags); - if (early || irqd_is_managed_and_shutdown(irqd)) + if (reserve || irqd_is_managed_and_shutdown(irqd)) vector_assign_managed_shutdown(irqd); else if (apicd->is_managed) ret = activate_managed(irqd); diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index 5f6fd860820a..e4cb9f4cde8a 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -128,7 +128,7 @@ static void uv_domain_free(struct irq_domain *domain, unsigned int virq, * on the specified blade to allow the sending of MSIs to the specified CPU. */ static int uv_domain_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data); return 0; diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c index 2313af82fad3..acd59113e08b 100644 --- a/drivers/gpio/gpio-xgene-sb.c +++ b/drivers/gpio/gpio-xgene-sb.c @@ -139,7 +139,7 @@ static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio) static int xgene_gpio_sb_domain_activate(struct irq_domain *d, struct irq_data *irq_data, - bool early) + bool reserve) { struct xgene_gpio_sb *priv = d->host_data; u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq); diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 7d5eb004091d..97baf88d9505 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -4184,7 +4184,7 @@ static void amd_ir_update_irte(struct irq_data *irqd, struct amd_iommu *iommu, struct irq_cfg *cfg); static int irq_remapping_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { struct amd_ir_data *data = irq_data->chip_data; struct irq_2_irte *irte_info = &data->irq_2_irte; diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index 76a193c7fcfc..66f69af2c219 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -1397,7 +1397,7 @@ static void intel_irq_remapping_free(struct irq_domain *domain, } static int intel_irq_remapping_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { intel_ir_reconfigure_irte(irq_data, true); return 0; diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 4039e64cd342..06f025fd5726 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -2303,7 +2303,7 @@ static int its_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, } static int its_irq_domain_activate(struct irq_domain *domain, - struct irq_data *d, bool early) + struct irq_data *d, bool reserve) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); u32 event = its_get_event_id(d); @@ -2818,7 +2818,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq } static int its_vpe_irq_domain_activate(struct irq_domain *domain, - struct irq_data *d, bool early) + struct irq_data *d, bool reserve) { struct its_vpe *vpe = irq_data_get_irq_chip_data(d); struct its_node *its; diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index a276c61be217..e62ab087bfd8 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -290,7 +290,7 @@ static int stm32_gpio_domain_translate(struct irq_domain *d, } static int stm32_gpio_domain_activate(struct irq_domain *d, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { struct stm32_gpio_bank *bank = d->host_data; struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent); diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index a34355d19546..48c7e86bb556 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -113,7 +113,7 @@ struct irq_domain_ops { unsigned int nr_irqs, void *arg); void (*free)(struct irq_domain *d, unsigned int virq, unsigned int nr_irqs); - int (*activate)(struct irq_domain *d, struct irq_data *irqd, bool early); + int (*activate)(struct irq_domain *d, struct irq_data *irqd, bool reserve); void (*deactivate)(struct irq_domain *d, struct irq_data *irq_data); int (*translate)(struct irq_domain *d, struct irq_fwspec *fwspec, unsigned long *out_hwirq, unsigned int *out_type); diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index 07d08ca701ec..ab19371eab9b 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -440,7 +440,7 @@ static inline bool irq_fixup_move_pending(struct irq_desc *desc, bool fclear) #endif /* !CONFIG_GENERIC_PENDING_IRQ */ #if !defined(CONFIG_IRQ_DOMAIN) || !defined(CONFIG_IRQ_DOMAIN_HIERARCHY) -static inline int irq_domain_activate_irq(struct irq_data *data, bool early) +static inline int irq_domain_activate_irq(struct irq_data *data, bool reserve) { irqd_set_activated(data); return 0; diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 4f4f60015e8a..62068ad46930 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -1693,7 +1693,7 @@ static void __irq_domain_deactivate_irq(struct irq_data *irq_data) } } -static int __irq_domain_activate_irq(struct irq_data *irqd, bool early) +static int __irq_domain_activate_irq(struct irq_data *irqd, bool reserve) { int ret = 0; @@ -1702,9 +1702,9 @@ static int __irq_domain_activate_irq(struct irq_data *irqd, bool early) if (irqd->parent_data) ret = __irq_domain_activate_irq(irqd->parent_data, - early); + reserve); if (!ret && domain->ops->activate) { - ret = domain->ops->activate(domain, irqd, early); + ret = domain->ops->activate(domain, irqd, reserve); /* Rollback in case of error */ if (ret && irqd->parent_data) __irq_domain_deactivate_irq(irqd->parent_data); @@ -1716,17 +1716,18 @@ static int __irq_domain_activate_irq(struct irq_data *irqd, bool early) /** * irq_domain_activate_irq - Call domain_ops->activate recursively to activate * interrupt - * @irq_data: outermost irq_data associated with interrupt + * @irq_data: Outermost irq_data associated with interrupt + * @reserve: If set only reserve an interrupt vector instead of assigning one * * This is the second step to call domain_ops->activate to program interrupt * controllers, so the interrupt could actually get delivered. */ -int irq_domain_activate_irq(struct irq_data *irq_data, bool early) +int irq_domain_activate_irq(struct irq_data *irq_data, bool reserve) { int ret = 0; if (!irqd_is_activated(irq_data)) - ret = __irq_domain_activate_irq(irq_data, early); + ret = __irq_domain_activate_irq(irq_data, reserve); if (!ret) irqd_set_activated(irq_data); return ret; -- cgit v1.2.3-71-gd317